Database Users

Unlocking the bootloader

Hey all, finally got my N1 today and I've been trying to unlock the bootloader for a bit following the instructions at redmondpie
You can follow the step by step guide posted below (on your own risk) to unlock the bootloader on the Google Nexus One phone. We are not to be held responsible if you ended up bricking your phone. The steps are as follows.
Step 1: Download and extract fastboot from here (Windows, Linux and Mac included).
Step 2: Run a command prompt / terminal at the directory you just extracted.
Step 3: Type ‘fastboot-windows oem unlock’ or ‘./fastboot-mac oem unlock’ or ‘./fastboot-linux oem unlock’ (as appropriate).
Step 4: Proceed on your merry bootloader unlocked way.
Our complete coverage on the Google Nexus One phone can be found here.
Click to expand...
Click to collapse
Problem is I get a "fastboot-windows is not recognized as an external or internal command.
I've tried the command while in fastboot mode and while in the bootloader.
Any help is appreciated.
Carlos
Fastboot devices does recognize my N1

you need to start your phone in fastboot mode. turn off your phone, hold trackball button down, power on your phone while still holding trackball down.
also when you open a command prompt type cd followed by the path to the folder where your fastboot file is at (example: cd C:/myfolder/) and press enter. then type the command

I don't have my N1 yet so I haven't tried.
You're sure you are in the proper directory in the command prompt?
also maybe run the command prompt as admin? (right click on the icon run as administrator)

I'm an idiot.
I was supposed to download the zip attached in that thread and run the command prompt from the extracted folder. FYI: you can hold ctl+shift and left click on the folder to open a command prompt.
Well, might as well sticky this so other people don't have the same problem.

[GUIDE] Linux Ubuntu: Unlocking Bootloader / Rooting Nexus S

One thing I've noticed is there isn't a lot of documentation for getting set up and unlocking your bootloader on a Linux OS. Setting up your machine to get adb and fastboot to recognize your device takes a tiny bit of extra work on a Linux operating system, but what exactly needs to be done may not be clear to everyone. Whether it's because you're new to the Android SDK/adb, somewhat new to Linux, or can't simply can't seem to find the Vendor Code for the Nexus S. (For those who are looking specifically for this, it's '18d1', and I assume will be the same on all Nexus devices to come; If this means nothing to you right now, read on.)
Disclaimer: I take no responsibility if something goes wrong (if it does, it should be fixable though), Unlocking your bootloader voids your warranty (but you can lock it back), Unlocking the bootloader will wipe your entire phone, including USB Storage; so make a copy of all those family photos and other files you may have put onto the USB storage if you want to keep them.
For the sake of sanity, this guide assumes you are using Ubuntu. If you're using something else (or different applications), there are terminal commands offered, and you probably have an idea on how to adapt the given instructions to your Linux OS.
Preparation: Installing the Android SDK, ADB, Fastboot & Setting Up Your Nexus S to be Recognized
1. Download the Android SDK for Linux: http://dl.google.com/android/android-sdk_r08-linux_86.tgz
2. Save it in a folder of your choice. I chose to keep it in my Downloads folder, myself. If you'd like, you can rename it to the simpler name of 'AndroidSDK.tgz'. The rest of the guide will assume that you did, because I'm lazy, and it makes things simpler; it will also assume you saved it in Downloads. If you feel that you have the intuition to rename and edit the path names based on your own choices, then fine; but if you're utterly lost here, just stick with what I'm doing; download to 'Downloads', rename to 'AndroidSDK.tgz'.
3. Now that you have it, navigate to the folder you downloaded it to, right-click, and click 'Extract' to unzip it. If for some reason you cannot do this, open up a terminal and try this command:
Code:
tar zxvf /home/<your-user-name>/Downloads/AndroidSDK.tgz
You may have to adjust the command if you didn't save it under Downloads or didn't rename the file to AndroidSDK.tgz.
4. Now, we'll install adb and some other software packages by starting up the Android SDK and AVD Manager. Start it either by:
- Navigating to your AndroidSDK folder, going to the 'tools' folder and double-clicking the file called 'android'; if a popup opens asking you what you want to do with it click 'Run'.
- Using this command:
Code:
/home/<your-user-name>/Downloads/AndroidSDK/tools/android
5. In Android SDK and AVD Manager, click on "Available packages". Check the box next to "Android SDK Tools, revision 8" and "Android SDK Platform-tools", and click on "Install Selected" then "Install". When prompted click "Yes" to restart ADB.
6.You should now have a folder in /home/<your-user-name>/Downloads/AndroidSDK/ called "platform-tools".
7. Download fastboot here: http://developer.htc.com/adp.html
- Save it to the aforementioned platform-tools folder.
- Now, navigate to the file, right click it, click 'Properties', go to the 'Permissions' Tab and check 'Allow executing file as program'. Alternatively, run this command:
Code:
chmod +x /home/<your-user-name>/Downloads/AndroidSDK/platform-tools/fastboot
8. Now to set things up so adb and fastboot recognize your Nexus.
- Type this command into a terminal:
Code:
gksudo gedit /etc/udev/rules.d/51-android.rules
- Paste this into the blank file:
Code:
SUBSYSTEM=="usb", SYSFS{idVendor}=="18d1", MODE="0666"
- Click save and close.
- Then, type the following terminal command:
Code:
sudo restart udev
9. Almost done with preparations! Run this command:
Code:
gedit .bashrc
And add this line to the top of the file:
Code:
#AndroidDev PATH
export PATH=${PATH}:/home/<your-user-name>/Downloads/AndroidSDK/tools:/home/<your-user-name>/Downloads/AndroidSDK/platform-tools
Then save the file and close.
10. Download this file and save it to /home/<your-user-name>/Downloads/AndroidSDK/platform-tools: http://www.mediafire.com/?4pe5y906zr67nfh
10.We're ready to go!
Unlocking the Bootloader on your Nexus S and Rooting
Once again, unlocking your bootloader wipes everything on your device, including USB storage. Make a backup of any files you want to keep.
1. On your Nexus S, go to Menu>Settings>Applications. Select "Development" and check the box next to "USB debugging"
2. Power off the phone, and then hold down the Volume Up button and the Power button simultaneously to get into Bootloader/Fastboot mode. Connect your Nexus to the computer via USB.
3. Run this command to unlock your bootloader: (Once again WIPES EVERYTHING!)
Code:
fastboot oem unlock
Hit Enter and on your phone you will be prompted to confirm the action. (Use Volume +/- buttons to choose, power button to confirm choice) Confirm. At this point you will have an unlocked bootloader.
4. Copy/paste the following into the Terminal window:
Code:
fastboot flash recovery /home/<your-user-name>/AndroidSDK/platform-tools/recovery-clockwork-herring.img
5. Use the Volume +/- buttons to choose the Recovery option, then press the power button.
6. In Recovery, go to 'mounts and storage' and choose 'mount USB storage'.
7. Go to this page: http://forum.xda-developers.com/showthread.php?t=682828
About 1/5 of the way down on that page, find the link for "su-2.3.6.1-ef-signed.zip", which is the link for the Froyo version of Superuser. Control-click (right click) on that link and choose "Download Link As..." Save that file to your desktop and then copy it to the main directory of your mounted phone.
8. Click 'Unmount'. Go back to 'mounts and storage' and choose 'mount /system'. Then Go Back and choose 'install zip from sdcard'>'choose zip from sdcard'>su-2.3.6.1-ef-signed.zip
9. When it's finshed installing, reboot. You are now rooted.
Special Thanks
Amin Sabet; I used your Mac guide as a reference and copy/pasted some things for convenience.
Koush; For first posting the unlocking information, developing ClockworkMod Recovery, and ROM Manager. You should probably hook him up with a donation. https://www.paypal.com/us/cgi-bin/w...63663d3faee8d9384d85353843a619606282818e091d0
Michael.B.; for suggesting adding the platform-tools folder to the .bashrc file.
Linus Torvalds; Without which we'd have neither Android nor Ubuntu.
Feel free to leave your comments on the guide below.

Good guide for beginners, I would throw in how to update their path so they can just type adb or fastboot
On Linux, edit your ~/.bash_profile or ~/.bashrc file. Look for a line that sets the PATH environment variable and add the full path to the tools/ and platform-tools directories to it. If you don't see a line setting the path, you can add one:
export PATH=${PATH}:/home/<your-user-name>/Downloads/AndroidSDK/tools:/home/<your-user-name>/Downloads/AndroidSDK/platform-tools
Click to expand...
Click to collapse
Be sure to update your username above.

Thanks a lot man, great guide. I didn't get my NS yet but this is gonna be very useful soon
ps: someone please stick this

Michael.B. said:
Good guide for beginners, I would throw in how to update their path so they can just type adb or fastboot
Be sure to update your username above.
Click to expand...
Click to collapse
Thanks for the tip. I added your tip and instructions for marking fastboot as executable.

Stuck due to the thread's usefulness

I forgot to ask: will this work for 64 bit systems?

nicholasbgr said:
I forgot to ask: will this work for 64 bit systems?
Click to expand...
Click to collapse
It should work just fine.

Thanks, got me rooted nice and quickly.

BlackOtaku said:
It should work just fine.
Click to expand...
Click to collapse
Yes but don't forget to install 32 libs.
Thanks for guide
Useful !
I'm waiting for cyanogen ROM so i'll able to install
Cheers

To confirm, yes it works on 64bit. I am running that

Thanks for the confirmation, guys

Good stuff, much appreciated.

I'm working on a simple shell script that should automate some of the more menial tasks while holding the user's hand through the process. I should have it up later today.
UPDATE: It's up! Link on the first page.
Sent from my Nexus S using XDA App

question:
If I use
Code:
fastboot boot recovery.img
instead of
Code:
fastboot flash recovery recovery.img
will i get OTA updates?

confiq said:
question:
If I use
Code:
fastboot boot recovery.img
instead of
Code:
fastboot flash recovery recovery.img
will i get OTA updates?
Click to expand...
Click to collapse
Or, I don't get OTA until i change OS with zip file (ex: su app) ?

confiq said:
Or, I don't get OTA until i change OS with zip file (ex: su app) ?
Click to expand...
Click to collapse
You shouldn't flash the recovery in the boot partition, I think that will cause problems with the phone period. :S
If you flash a custom boot.img (which this guide doesn't cover, though the script will flash Superboot) or kernel like Paul's Superboot, Supercurio's Voodoo Kernel, or Koush's insecure boot.img, OTA updates will fail to install. OTA updates will also reflash your recovery back to stock. One of the devs around here will probably start modifying them so they don't check the boot.img or reflash the recovery though.

Thanks for this! Worked perfectly

Hi all,
I have a strange problem. I can install ClockworkMod recovery but, when I reboot the phone, I don't have superuser installed and su doesn't work. If I reboot the phone, I have to install the recovery every time. It seems it isn't permanent.
Thanks
Matroska

matroska said:
Hi all,
I have a strange problem. I can install ClockworkMod recovery but, when I reboot the phone, I don't have superuser installed and su doesn't work. If I reboot the phone, I have to install the recovery every time. It seems it isn't permanent.
Thanks
Matroska
Click to expand...
Click to collapse
To fix the problem, before selecting zip file, you have to select mount /system. Then go to apply update.zip and proceed as usual.
Thanks

ok im stock
with this part fastboot oem unlock ware i put this code in my terminal of my pc ,,i put the cell in fasboot , i intall everiting if i put that code in my terminal
bash: /home/toshiba/.bashrc: line 2: syntax error near unexpected token `('
bash: /home/toshiba/.bashrc: line 2: `export PATH=${PATH}:/home/<your-user-name>/Downloads/AndroidSDK/tools:/home/<your-user-name>/Downloads/AndroidSDK/platform-tools# ~/.bashrc: executed by bash(1) for non-login shells.'
[email protected]:~$ fastboot oem unlock
fastboot: command not found
[email protected]:~$
what can i do or im doing wrong

Cannot get fastboot working in command line (win 7)

Hi to all I have a provlem I need help with.While trying to unlock my bootloader using rsd and fastboot.I get as far as the cmd line entries and have problems basically I cant seem to get my command line to use the fastboot command and or any other fastboot command I can find.What seems to happen all the time is that the command line responds with "this is not an internal or external command" or similar.
Any help appreciated Windows 7 64bit all latest drivers installed

scotty7910 said:
Hi to all I have a provlem I need help with.While trying to unlock my bootloader using rsd and fastboot.I get as far as the cmd line entries and have problems basically I cant seem to get my command line to use the fastboot command and or any other fastboot command I can find.What seems to happen all the time is that the command line responds with "this is not an internal or external command" or similar.
Any help appreciated Windows 7 64bit all latest drivers installed
Click to expand...
Click to collapse
are you in the same folder that the FASTBOOT.EXE is in when you run the command???

Make sure your running CMD as administrator. You can tell by the path that shows when cmd is launched. If its a regular user account it will path to something like: c:\users\"your username"\
If your running as admin it will path to something like: c:\windows\system32
Sent from my MB860 using XDA Premium App

Take your fastboot files and images and put them in a folder on the root of your C: drive... I use one named phone
Then you should be able to open your Command line and type
cd c:\phone
That will change you to the Phone directory you made in the root of C: earlier
If you want to make sure you can type DIR and it should list all the files you have in there.
At this time you can start using your fastboot commands and it will recognize them.

beatphreek said:
Take your fastboot files and images and put them in a folder on the root of your C: drive... I use one named phone
Then you should be able to open your Command line and type
cd c:\phone
That will change you to the Phone directory you made in the root of C: earlier
If you want to make sure you can type DIR and it should list all the files you have in there.
At this time you can start using your fastboot commands and it will recognize them.
Click to expand...
Click to collapse
Another handy thing is to open the folder then hold the shift key and then right click. You'll have an "Open command window here" option.

Yep I use that all the time...

used both the suggestions in here and still having trouble,can do the root of c folder,use the dir command see it is all there but the cd C:\fastbootpackage brings the same response again.Can anyone see where I am going wrong?Once the command line changes to fastboot what do I need to command?Phone is still attached (as per the guide I am following?)showing 100% phone needs manually rebooted.
I have all latest drivers on win 7 64bit and I am definetely running cmd as an administrator
Also as the third suggestion suggests if I open the cmd box from the folder what is the exact command to use from there?Is there an alternative to doing this as I am beginning to struggle?

Unlock your Bootloader
1. You need to download and install RDS lite on your PC:http://forum.xda-developers.com/attachment.php?attachmentid=634879&d=1308872277
2. Download and extract IHOP_Bell.rarhttp://api.viglink.com/api/click?format=go&drKey=1359&loc=http%3A%2F%2Fforum.xda-developers.com%2Fshowthread.php%3Ft%3D1136261&v=1&libid=1311795928774&out=http%3A%2F%2Fdiamantephoto.com%2FIHOP_Bell.rar&ref=http%3A%2F%2Fforum.xda-developers.com%2Fforumdisplay.php%3Ff%3D997&title=%5BPUDDING%5D%20International%20House%20of%20Pudding!%20(Unlock%2Froot%20thread)%20Updated%20July%2023%202011%20-%20xda-developers&txt=http%3A%2F%2Fdiamantephoto.com%2FIHOP_Bell.rar
3. Download and extract Fastboot tools http://gititbit.ch/FAST
4. Power down your Motorola Atrix
5. Take out your microSD card and SIM*card*for the flashing process
6. While turning the phone on, hold the Volume Up button until it acknowledges RSD
7. Your device will say “Starting RSD protocol support”
8. Run “RSD Lite” on your computer
9. Press the “. . .” button next to the box labeled “Filename”
10. Load up the SBF file – IHOP_Bell.sbf
11. Plug your device into your computer
12. RSD Lite should recognize your device and say “Model: NS Flash Olympus” and “Connected…”
13. Press the “Start” button
14. Be patient while the phone*reboots. It will take a long time.
15. Open and extract the Fastboot package from above
16. Open a command prompt window
a.On Windows, press Start and type “cmd” then press the enter button
17.Type the following command. Your directory will be the folder where you extracted the Fastboot package.
(Example:* cd C:\Users\Kenneth\Desktop\fastboot-package)
a.cd*your directory here
18. Power down your Atrix device
19. Hold the power button and the downward volume button until you see “Fastboot”
20. Let go of the buttons and press the upward volume button once
21. You will now see “Starting Fastboot protocol support”
22. Plug your device into a USB port in the back slot of your computer
a.Front slots sometimes do not have enough power to stay connected to the device.
23. Type the following command:
a.fastboot oem unlock
24. You will now receive a warning along with a unique device ID
25. Type the following commands using your unique device ID in place of the ####:
a.fastboot oem unlock ####
b.fastboot reboot
26. Wait for your device to reboot. Congratulations! You now have an unlocked bootloader!
This is the guide I have been using, thanks again

scotty7910 said:
"this is not an internal or external command"
Click to expand...
Click to collapse
This msg will only show if you are in different folder than your fastboot. You don't need to run cmd as administrator. The best thing to do is:
copy those 3 files (AdbWinApi.dll, AdbWinUsbApi.dll, fastboot.exe) to your main c:\ (do not put to the folder)
Run cmd and type "cd \" this will move you to c:\
Now type fastboot and press enter - you should see various commands that can be used. (your mobile doesn't need to be connect to your pc to see this)
Now you can continue with unlocking. If you applied ihop.sbf already then startt from step 18.
I'm 99% sure that you were in the wrong folder.

Thanks very much that last post got it.In fact I would say that is the simplest way I have read so far as far as fastbooting goes.Many thanks.I have been having problems installing tenfars cwm so I will be using the rom manager "official cwm,will using the fastboot-w command be a problem for me do you think?

scotty7910 said:
Thanks very much that last post got it.In fact I would say that is the simplest way I have read so far as far as fastbooting goes.Many thanks.I have been having problems installing tenfars cwm so I will be using the rom manager "official cwm,will using the fastboot-w command be a problem for me do you think?
Click to expand...
Click to collapse
Don't use the Rom Manager app. It sucks and doesn't work properly. Do things properly.
With XDA forum members there's no reason to do things half assed. Use your hole ass, dammit.

scotty7910 said:
Thanks very much that last post got it.In fact I would say that is the simplest way I have read so far as far as fastbooting goes.Many thanks.I have been having problems installing tenfars cwm so I will be using the rom manager "official cwm,will using the fastboot-w command be a problem for me do you think?
Click to expand...
Click to collapse
Well if you came that far then try to install tenfar's recovery, download this file :recovery-en-goapk-0630-1029.zip Unzip and move recovery-en-goapk-0630-1029.img to your c:\....Now reboot your phone and enter to fastboot mode. In cmd go to c:\ and type "fastboot flash recovery recovery-en-goapk-0630-1029.img" and then "fastboot reboot" DONE
If you have any problems try to download moto-fastboot (http://forum.xda-developers.com/attachment.php?attachmentid=635584&d=1308928440). It's kind of the same thing as fastboot and to be honest I don't know what's the different between both (I think moto-fastboot is designed for 2.3.4 firmware). Extract zip and move moto-fastboot to c:\ and type the same command but instead of fastboot type moto-fastboot. I hope this make sense.
Also it's recommended to delete "install_recovery.sh" which apparently is in /system/etc/ BUT I never managed to find this file and I just ignored this step.

thanks foka, but I have already tried and tried again unsuccessfully to use tenfars cwm.I can install the recovery and delete the sh file all as normal using fastboot and astro.However for some reason there seems to be no way I can get into cwm having flashed it.when I attempt it I dont see the same menu I could scroll through as before.Then I tried a cwm of tenfars that was supposed to flash through rom manager.Again the flash went fine but could not seem to enter recovery mode.I see you installed aura 1.1 didi you flash a radio afterwards?My signal is comnstantly 1 bar.Could you reccomend a uk radio?

Well Ive flashed at&t radio N_01.77.30p which solved battery draining and 1 bar issue. I'm not sure why you can't use cwm recovery...
Sent from Motorola Atrix

What do you mean you don't see the same menu as before? When you hold volume down, power up phone, fastboot, scroll through the list and none of them say Android Recovery?

[GUIDE]-Updated 17March - Unlock/Root - Return to Stock/Unbrick - Nexus7 3G - 4.2.2

[GUIDE] UNLOCK - ROOT - RETURN TO STOCK and/ or UNBRICK your Nexus 7 3G “Nakasig- Tilapia” v4.2.2
- Disclaimer: I don't take any responsibility for anything you do to your tablet, which is to transform it into brick, break, or transform it into coffee machine -
Requirements:
1. You must have the sdk (ADT Bundle for Win) installed on your Pc and you are able to access, and use adb and fastboot.
NOTE: Notice the install location. This defaults to C:\Users\<user name>\AppData\Local\Android\android-sdk the platform tools (adb, fastboot) and usb drivers will be downloaded to this location. This will be referred to from here on as your sdk directory
But in case you haven't install all SDK, you can use only fastboot by the easy way.(Go here if you want to use the easy way to fastboot)
2. You must have ticked USB Debugging mode in your Nexus 7 3G
3 You must download and install - USB DRIVERS r_06 for Windows 7 & 8
4. Download one of both root-tool
CF- Auto-Root by Chainfire - Download link for Version Tilapia - Nakasig
or the Superboot r4 by Paul O’Brien - Actually I'm not sure if Superboot is functionnal for version 4.2.2 - I tested with my Grouper v4.2.2 and I stayed in Google screen with bootloop.
5. Download your recovery special for your Tilapia - Nakasig
CWM (Touch version or not)
TWRP - latest versions
ClockworkMod - Google Nexus 7 (GSM) - Superuser (fixed) for Android 4.2.
and rename your select with the name of the recovery image you chose to download.
6. The factory image for the Nexus 7 3G => 4.2.2 (JDQ39) - nakasig-jdq39-factory-0798439d.tgz - md5: ee8db1ed6ff1c007fe12136d4bc65cd8- size: 279.9MB - The Version Zip if you prefer
Click to expand...
Click to collapse
AND DON'T FORGET THAN IT'S BETTER FOR YOUR SPECIAL N7 3G+
TO USE THE SPECIAL RECOVERIES "TILAPIA - NAKASIG"
and NOT "GROUPER" WHICH ARE DIFFERENTS​
Click to expand...
Click to collapse
**********************************************************************************************************************************************************************
Pre-Steps
To make this easier,
1 - you should put the root-tool.zip selected on the folder “fastboot” (if you use the easy way - Goto post #2)
2 – You should put the recovery.img selected on the folder “fastboot”
UNLOCK YOUR NEXUS 7 3G+
Click to expand...
Click to collapse
To unlock your device, you must go to your bootloader. To do that, you have possibilities;
1. Turn your device on while pressing volume down
or
1. Connect your device and go to cmd terminal
Code:
> cd \Users\<user name>\AppData\Local\Android\android-sdk\platform-tools (it's common localization for an auto install)
> adb devices
# the following output should be returned
List of devices attached
<device serial number> device
2. Boot to the bootloader by use adb
Code:
adb reboot bootloader
or
2 Bis. Boot to the bootloader by use fastboot
Code:
fastboot reboot-bootloader
3. Unlock your device* by
Code:
fastboot oem unlock
*You will have to accept and erase all of your data on the tablet.
You are unlocked :good:
By Fastboot only easy way - Unlock you device
Code:
C:\Users\Username>cd c:\fastboot
Code:
c:\fastboot>fastboot oem unlock
**********************************************************************************************************************************************************************
FLASH THE RECOVERY
Click to expand...
Click to collapse
You can choose one of both recoveries - CWM or TWRP
Flash ClockworkMod Recovery as Permanent recovery
Click to expand...
Click to collapse
(You're still inside the bootloader and connected through the usb cable)
1. Flash CWM especially for your N7 3G
Code:
fastboot flash recovery recovery-name of your recovery.img
To make CWM Permanent recovery
2. Boot into recovery by pressing “volume up” and when the menu says ‘recovery mode’ press the power button
3. Go to “Mounts and Storage” menu
4. select “mount system”
5. Type in cmd terminal
Code:
adb shell
cd /system
mv recovery-from-boot.p recovery-from-boot.bak
exit
If you having trouble gaining shell, try
Code:
adb kill-server
then
Code:
adb start-server
. And restart the lines command above
* For some people, it has been reported that you don't have to replace recovery-from-boot.bak. The flash is enough to make the recovery stick.
**********************************************************************************************************************************************************************
Flash TWRP as Permanent recovery
Click to expand...
Click to collapse
(You're still inside the bootloader and connected through the usb cable)
1. Flash TWRP especially for your N7 3G
Code:
fastboot flash recovery recovery-twrp-tilapia-2.4.4.0.img
To make TWRP Permanent recovery
2. Boot into recovery by pressing “volume up” and when the menu says ‘recovery mode’ press the power button
3. Go to “Mounts and Storage” menu
4. select “mount system”
5. Type in cmd terminal
Code:
adb shell
cd /system
mv recovery-from-boot.p recovery-from-boot.bak
exit
**********************************************************************************************************************************************************************
FOR THE ROOT
Click to expand...
Click to collapse
- [2013.02.20][N7 WiFi | N7 3G] CF-Auto-Root
Click to expand...
Click to collapse
What's installed
- SuperSU binary and APK
- Nothing else, that's it.
Installation and usage
- Download the ZIP file (see post below for link)
- Extract the ZIP file (you will see - 2 folders=> images & tools and 3 files: root-windows // root-mac // root-linux)
- Boot your device in bootloader/fastboot mode. Usually this can be done by turning your device off, then holding VolUp+VolDown+Power to turn it on.
- Connect your device to your computer using USB
- Windows:
Code:
Run root-windows.bat
- Linux
Code:
chmod +x root-linux.sh
Code:
Run root-linux.sh
- Mac OS X
Code:
chmod +x root-mac.sh
Code:
Run root-mac.sh
- [ROOT] Superboot - Nexus 7 WiFi / 3G root solution
Click to expand...
Click to collapse
How to use Superboot - Windows, Linux and OSX
- Download the Superboot zip file above and extract to a directory
- Put your device in bootloader mode - Turn off the phone then turn on with the 'volume up' and 'volume down' buttons both pressed to enter the bootloader (as pictured below)
- WINDOWS - double click 'superboot-windows.bat'
- MAC - Open a terminal window to the directory containing the files,
and type
Code:
chmod +x superboot-mac.sh
followed by
Code:
./superboot-mac.sh
- LINUX - Open a terminal window to the directory containing the files,
and type
Code:
chmod +x superboot-linux.sh
followed by
Code:
./superboot-linux.sh
**********************************************************************************************************************************************************************
RETURN TO STOCK and/or UNBRICK your N7 3G+
Click to expand...
Click to collapse
Before you begin, please make sure you have ADB and Fastboot drivers installed and working.
1. Download the factory image for the Nexus 7 3G=> 4.2.2 (JDQ39) - nakasig-jdq39-factory-0798439d.tgz - md5: ee8db1ed6ff1c007fe12136d4bc65cd8- size: 279.9MB - The Version Zip if you prefer
2. Extract the factory image into the same directory as your ADB and Fastboot executables (e.g. "\android-sdk\platform-tools")
3. Plug in your device. If you are booted into Android, open a command prompt to your ADB and Fastboot directory, then type:
Code:
adb reboot bootloader
If your device is powered off, press and hold both volume keys and the power button simultaneously. After holding all three buttons for a couple of seconds, your bootloader should launch. This should reboot you into the bootloader.
4. Type:
Code:
fastboot flash bootloader bootloader-tilapia-4.18.img
5. Type:
Code:
fastboot reboot-bootloader
6. Now type:
Code:
fastboot -w update image-nakasig-jdq39.zip
7. Optional: If you would like to relock your bootloader for warranty or security purposes, make sure you are in your bootloader screen again and type:
Code:
fastboot oem lock
8. If your tablet hasn't already rebooted automatically, you can type
Code:
fastboot reboot
Well done. You should now be back on stock Android 4.2.2
**************************************************************************************************************************************************************************************
These root tools are actually the easy way for rooting your device, so you can use them without problems.
IF YOU NEED MORE ABOUT THE NEXUS 7 3G+ "NAKASIG - TILAPIA" YOU MUST GO HERE
=> [Index]- 29 Dec 2012 - All for NEXUS 7 - "Nakasig/Tilapia" - (GSM/HSPA+)
and
=> NEXUS 7 3G-"nakasig"-For all Your Jelly Bean Discussions, Problems and Solutions
Click to expand...
Click to collapse
For my part I’ve used
the easy way by my fastboot guide for unlock my device,
Adb lines command for flash TWRP as permanent recovery,
Thanks for @mateorod, @Chainfire, @paulobrien and all members who helps for the development about the Nexus 7 3G+

The EASY WAY TO USE FASTBOOT LINES COMMAND
HELP FOR FLASH MORE FASTER WHEN YOU USE FASTBOOT LINE COMMAND​
If you have got a problem with your adb or fastboot or recovery....it's very simply and faster
use this:
Download this file "fastboot.zip"
Install this file somewhere in one folder which is named "fastboot" on your PC
=> disk C: root
Unzipped this file on the folder "fastboot" and you will find 3 files:
- adb.exe
- AdbWinApi.dll
- fastboot.exe
and when you need to push something by the bootloader, you can use it.
Don't forget to push on this folder the file that you need. For exemple: boot.img or a recovery.img, etc...
The line command is :
Code:
c:\fastboot>
Enter
Code:
c:\fastboot>fastboot flash recovery recovery.img
Enter
If you want to flash the "recovery.img" file
******************************************************************
******************************************************************
If you want to know all lines of command
Code:
c:\fastboot>fastboot
Code:
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache
-s <serial number> specify device serial number
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address
-n <page size> specify the nand page size. default: 2048

Reserved in case

Hello, this is my first post on xda.
When i tried use "adb fastboot bootloader" cmd say to me : no device. Where is problem?

piski93 said:
Hello, this is my first post on xda.
When i tried use "adb fastboot bootloader" cmd say to me : no device. Where is problem?
Click to expand...
Click to collapse
Try the easy way on first
Use the post 2.
You can use it for all the install, except for for the permanent recovery where you will have to use ADB line command.
The best you can do, it's to use fastboot easy way and when you have finished, you learn and install correctly your sdk and check all your parameters. And when you will be ready you will be able to use adb lines command easily to install your recovery in a permanent way.
It's too long for a course about sdk, the best you can do it's to to search and read. Go to my index, and read the General guides

Gonna try this later today. Though something is a bit fishy. When I use adb from the fastboot.zip it can't find my device but from the platform-tools dir it seems to work fine. Are they different versions? How big risk is it to brick the device while unlocking/rooting and installing recovery? Pls tell me its unbrickable. cheers
Skickat från min GT-I9300 via Tapatalk 2

znejk said:
Gonna try this later today. Though something is a bit fishy. When I use adb from the fastboot.zip it can't find my device but from the platform-tools dir it seems to work fine. Are they different versions? How big risk is it to brick the device while unlocking/rooting and installing recovery? Pls tell me its unbrickable. cheers
Click to expand...
Click to collapse
I can't says it's unbrickable !!!
The differences between these versions is:
If you use sdk/platform tools it's the more complete install and the easy way for fastboot, that just if you need to use fastboot line command, but it's not more complete for using with adb lines command.
If you go to the post 2, you will see all the lines command for fastboot.
If your sdk install is correct, you can use it without problems.
The easy way by fastboot is just a shotcut

philos64 said:
I can't says it's unbrickable !!!
The differences between these versions is:
If you use sdk/platform tools it's the more complete install and the easy way for fastboot, that just if you need to use fastboot line command, but it's not more complete for using with adb lines command.
If you go to the post 2, you will see all the lines command for fastboot.
If your sdk install is correct, you can use it without problems.
The easy way by fastboot is just a shotcut
Click to expand...
Click to collapse
I tried and everything seemed to work fine ... i Unlocked/flashed twrp then "mv recovery-from-boot.p recovery-from-boot.bak" didnt work cause it couldnt find the file... :/ i continued and flashed superboot and it seemed to work fine. Downloaded latest cm and gapps rebooted inte recovery and flashed them. Now I only have bootloop with cm10.1...
I know it aint bricked cause I think I can get into bootloader.
Edit: After a factory reset it worked! :>

znejk said:
How big risk is it to brick the device while unlocking/rooting and installing recovery? Pls tell me its unbrickable. cheers
Click to expand...
Click to collapse
The Nexus7 is very difficult to brick. It still is possible, but as far as I know there is only one way to do it - remove or destroy the bootloader.
Under normal circumstances, the only time you do anything with the bootloader is unlocking/locking it, which simply does a minor modification. That's perfectly fine. And the normal custom-recovery/root process doesn't touch it, so that's fine too. Doing system updates (even legit OTA ones) might upgrade the bootloader, as might flashing custom roms. But as long as you don't interrupt the process during that critical step, it should be OK.
So outside of erasing the bootloader or flashing a completely incompatible bootloader and rebooting, your N7 should be safe.

adb command line Linux support
Hi All,
Am new to this forum and also to my newly bought N73G. So I am unsure about the complete process though explained step by step. One thing that i wanted to confirm was Does ADT Bundle for linux work the same as that of windows? Cause I run the same on my PC; these command line instructions would they work the same way on Linux terminal?

It's not the same as Windows. You can download the ADT Bundle for Linux.
Sent from my N7 3G between sky and earth

Is there any solution for unlock and root Nexus 7 3G only with Apple Mac assistance? Thank you in advance!!!

foxstam said:
Is there any solution for unlock and root Nexus 7 3G only with Apple Mac assistance? Thank you in advance!!!
Click to expand...
Click to collapse
Can you explain what do you think by Apple Mac Assistance ?
If it's for SDK Tools, you will find here the Apple version => DOWNLOAD FOR OTHER PLATFORMS

I'm not sure which recovery images should be downloaded.
Is this one correct? - recovery-twrp-tilapia-2.3.2.1.img
what does this mean? "rename your select with the name of the recovery image you chose to download."
quote:
Requirements:
...
4. Download:
CWM (Touch version or not) or TWRP and rename your select with the name of the recovery image you chose to download.
thanks

elelab said:
I'm not sure which recovery images should be downloaded.
Is this one correct? - recovery-twrp-tilapia-2.3.2.1.img
what does this mean? "rename your select with the name of the recovery image you chose to download."
Requirements:
4. Download:
CWM (Touch version or not) or TWRP and rename your select with the name of the recovery image you chose to download.
Click to expand...
Click to collapse
Yes, you can use the recovery-twrp-tilapia-2.3.2.1.img without problem
and when I writes "rename your select with the name of the recovery image you chose to download", I mean that you can rename the IMG file by "recovery" simply. It's more faster.

minimum steps to root Nexus7(3G) - for beginners
confused by too much info. on how to root Nexus 7
can this be as simple as:
1 unlock
2 root
question:
1. unlock step - erase all of your data on the tablet
If I don't care my data (I just bought it), after unlocking, can Nexus start as normal?
2. Why do we need flash the recovery?
"Pre-Steps
To make this easier,
1 - ...
2 – You should put the recovery.img selected on the folder “fastboot” (if you use the easy way - Goto post #2)
" fastboot flash recovery recovery-twrp-tilapia-2.3.2.1.img"
does "recovery-twrp-tilapia-2.3.2.1.img" mean the "recovery.img"?
thanks

elelab said:
confused by too much info. on how to root Nexus 7
can this be as simple as:
1 unlock
2 root
question:
1. unlock step - erase all of your data on the tablet
If I don't care my data (I just bought it), after unlocking, can Nexus start as normal?
2. Why do we need flash the recovery?
Click to expand...
Click to collapse
Answers:
1 - Yes, the advert is clear, all of your data will be erased !
2 - If you want to flash a rom custom, you need a recovery
elelab said:
"Pre-Steps
To make this easier,
1 - ...
2 – You should put the recovery.img selected on the folder “fastboot” (if you use the easy way - Goto post #2)
" fastboot flash recovery recovery-twrp-tilapia-2.3.2.1.img"
does "recovery-twrp-tilapia-2.3.2.1.img" mean the "recovery.img"?
Click to expand...
Click to collapse
Yes, it's correct. it's more faster to write: "recovery.img" than "recovery-twrp-tilapia-2.3.2.1.img".
It's the same file, just rename.
This has no effect on the recovery flash

Can I root my device (4.2.2) using Superboot yet ?

Re: [GUIDE] - Updated 08 Feb - Unlock and Root a Nexus7 3G “Nakasig- Tilapia”
I received 4.2.2 update today. I haven't installed it for fear of losing root. Should i repeat the procedure to root again after updating my n7. Will i again loose my data? Or the bootloader will remain unlocked? Please help
Sent from my Nexus 7 using xda app-developers app

sukhjit_bhullar said:
I received 4.2.2 update today. I haven't installed it for fear of losing root. Should i repeat the procedure to root again after updating my n7. Will i again loose my data? Or the bootloader will remain unlocked? Please help
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I can flash UPDATE-SuperSU-v1.04.zip in CWM/TWRP recovery to get root after update from 4.2.1
You will not loose any data.
Your bootloader will upgrade to 4.18 and still unlocked.

(GUIDE) HOW-TO-LINUX --- Restore your BRICKED Nexus 7 using fastboot and Linux

Hello all,
I haven't really seen any options for restoring our Nexus 7's using Linux and terminal commands....
SO I made one!
This guide is the simplest I could make it and it only uses a few commands to get your Nexus 7 back up and running in the event of a brick or loss of data.
AS long as you have access to the Bootloader option of the device, this tool should work.
INSTRUCTIONS
1.Make sure that you have ADB and Fastboot installed
Open Terminal (CTRL+ALT+T)
Just type what's in the quotation marks, do not include the marks
Type "sudo apt-get update"
Type "sudo apt-get install android-tools-adb android-tools-fastboot"
2. While in Terminal, browse to location of downloaded files (boot.img , system.img)
ex. Type something like "cd ~/Downloads/NexusRestore"
3. Connect your Nexus 7 to your computer with USB cable and make sure that the device is in bootloader mode
HINT: type "fastboot devices" and it should show a set of random characters and then the word "Fastboot" to the right
4. Type these commands to restore your device to a stock rooted Jellybean ROM
fastboot devices
fastboot flash system system.img
fastboot flash recovery recovery.img (ONLY use this if you DO NOT want to kep your original recovery or if you lost it due to your situation)
fastboot flash boot boot.img
fastboot -w
fastboot reboot
5. Profit
You may now go back to recovery and flash the ROM of your choice or do whatever your heart desires
DOWNLOADS​
Dev-Host: http://d-h.st/KaZ
Extract the ZIP file and work from that directory.
Happy Restoring!! Let me know if you have any questions or need more Help :laugh:

Not to be nit picky but the instructions you gave are for Debian based distros (most likely Ubuntu/Mint- since android-tools are a backport in Debian Wheezy), IMHO it would be better to specify that this is a Ubuntu/Mint (Debian) Guide, since other distros use different package managers.
Once you have android tools installed there is an easier method.
Download factory image, extract the tar archive, run flash-all.sh
(optionally edit flash-all and remove the -w switch to preserve user data)

oldsoldier2003 said:
Not to be nit picky but the instructions you gave are for Debian based distros (most likely Ubuntu/Mint- since android-tools are a backport in Debian Wheezy), IMHO it would be better to specify that this is a Ubuntu/Mint (Debian) Guide, since other distros use different package managers.
Once you have android tools installed there is an easier method.
Download factory image, extract the tar archive, run flash-all.sh
(optionally edit flash-all and remove the -w switch to preserve user data)
Click to expand...
Click to collapse
I appreciate the info, I've only ever used Ubuntu Linux and every method that I had found so far was super in depth and not exactly simple. I've been doing this stuff for a while, so it's no big deal for me, but I wanted to provide something for people who don't do this kind of stuff every day. Just trying to contribute to the "cause" i guess. lol

Good tutorial

Help
Zesty01 said:
Hello all,
I haven't really seen any options for restoring our Nexus 7's using Linux and terminal commands....
SO I made one!
This guide is the simplest I could make it and it only uses a few commands to get your Nexus 7 back up and running in the event of a brick or loss of data.
AS long as you have access to the Bootloader option of the device, this tool should work.
INSTRUCTIONS
1.Make sure that you have ADB and Fastboot installed
Open Terminal (CTRL+ALT+T)
Just type what's in the quotation marks, do not include the marks
Type "sudo apt-get update"
Type "sudo apt-get install android-tools-adb android-tools-fastboot"
2. While in Terminal, browse to location of downloaded files (boot.img , system.img)
ex. Type something like "cd ~/Downloads/NexusRestore"
3. Connect your Nexus 7 to your computer with USB cable and make sure that the device is in bootloader mode
HINT: type "fastboot devices" and it should show a set of random characters and then the word "Fastboot" to the right
4. Type these commands to restore your device to a stock rooted Jellybean ROM
fastboot devices
fastboot flash system system.img
fastboot flash recovery recovery.img (ONLY use this if you DO NOT want to kep your original recovery or if you lost it due to your situation)
fastboot flash boot boot.img
fastboot -w
fastboot reboot
5. Profit
You may now go back to recovery and flash the ROM of your choice or do whatever your heart desires
DOWNLOADS​
Dev-Host: http://d-h.st/KaZ
Extract the ZIP file and work from that directory.
Happy Restoring!! Let me know if you have any questions or need more Help :laugh:
Click to expand...
Click to collapse
First link in "Dowload" is dead !

Thanks for this simple tuto !
In introduction of your thread, you can put this link : http://developer.android.com/tools/device.html