Database Users

How to cardflash with hareld?

Hi
does anyone know how in need to call the "ARTEIMG.nbh" with the hareld when I am using this manual:?
http://wiki.xda-developers.com/index.php?pagename=Artemis_SD_Card_Flashing
Empty (erase the contents) of your microSD card from the Windows Mobile file explorer or format it from your computer using a card reader (in some cases format doesn't work).(not necessary, do it only if 1st attemt fails)
Extract the .NBH file from your prefered ROM upgrade: In windows use winrar (right click) to extract the contents of the exe file. In Linux / MacOS use cabextract.
Rename the .NBH file to ARTEIMG.nbh and copy it to the root folder of your microSD card.
With microSD card inserted on the phone, start the bootloader (The bootloader is invoked by pressing down the Record button and using the stylus at the same time to press the RESET button at the left side).
You should see the screen pictured on the left, confirm flashing on screen by pressing the volume slider down.
Flashing might hang after some time but this is normal. Just wait. Complete flash takes about 30 minutes, so check your battery or connect to charger before the flashing process starts.
SuperCID devices are able to flash any NBH image using this method.
Click to expand...
Click to collapse

some few more question
witch of these files do I need to give the name???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

does nobody has experience with this???
I really need to do this so I can send it to repair...

haha problem solved.
In someway my phone was able to connect with my pc with a broken usb. haha
In bootloader mode it just worked

Why do you want to update your rom this way?
It is much easilier with the HARD-SPL or USPL.
Look a bit around the herald forum and you will find these methods!!!

Yes I know but my usb connection in my phone broke down, so i need to send it to repair.
But i had the touchit rom on it, so with that rom I didnt had any garantee

[Q] Webtop without dock

Hi I am new to this forum and I'm not an expert, I really would like to use the webtop without a dock,i tried following the instructions posted here but nothing happens, I don't know what am I missing. Am I supposed to run the install file on my computer or on my phone? When I run it on my computer a black screen appears and some command and then I says to press any key and that my phone will reboot, but nothing happens. Am I supposed to do something to my phone?
I'm on att gingerbread, not rooted, I enabled debugging mode.
Thank you

You need to root and probably deodex
sent from my Atrix via XDA premium

You are probably right, but why then on Fenny's post it says no root or deodex needed??
http://forum.xda-developers.com/showthread.php?t=980193

oh well look at that,
you run the script from your computer but your phone has to be connected and have all the right drivers on your computer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Can you please be a little more specific, I have the drivers for motorola media link and the phone portal, also for usb connection.

do you know what ADB is and how to use it?

No. I don't know... I just enabled the debugging mode on my phone

clastrag said:
No. I don't know... I just enabled the debugging mode on my phone
Click to expand...
Click to collapse
ok connect your phone to hyhour computer and make sure the computer knows it is connected
then run the script

good advice
If I were you I'd be VERY CAREFUL and investigate and learn all you can BEFORE doing any mods on your phone. Too many phones have been bricked (rendered useless) by running things you know little about.

I did that but the doesn't do anything, it doesn't reboot like it says on the script. I know it's connected because when I enable debugging I see the pop up screen for the internal memory and the sd card

Thanks for your concern I really appreciate it.what I like about this is that doesn't require root

Root
Hi
I also had exactly the same problem.
I wanted webtop, without really rooting my device.
It didnt work out. Also ran the script no reboot etc.
I then rooted my device, Fenny assisted me to create 2 files for the stock 2.2.2 atrix 4g (The older version of the os)
I copied them manually using root explorer, rebooted, and walla, i had the webtop working.
I still have those files.....
If you need them, PM me, its worth a try...

How to root, step-by-step.

ok guys, so first, i want to apologize for my bad english. im not very good when it comes to writing and talking.
let's go; what we are going to do is flash the ROM with aan included ROOT, with the posibility of wiping our device.
I remind you that: **I'M NOT RESPONSIBLE FOR ANY DAMAGE TO YOUR DEVICE OR YOUR COMPUTER.**
**I RECOMMEND CHARGING YOUR BATTERY TO 100%**
**I ALSO RECOMMEND YOU TO MAKE A COPY OF ALL YOUR DATA**
YOU WILL MISS YOUR GARANTY IF YOU ROOT YOUR DEVICE**
​
First step: DOWNLOAD THE ROM Through this link and place it in your desktop.
2. you will also have to download ODIN 3​
3.in Developer options, activate the USB Debugging option (Settings --> Developer options --> USB Debugging
Ok, you have to start ODIN and you have to get your device in Downloading Mode. (you will do this by shuting it off. and then pressing *VOLUME DOWN KEY*+*HOME KEY*+*POWER KEY*. when you do that you should press the volume up key) When you are in Downloading mode you should connect your device to your PC.
4. Once synchronized, with Odin, you have to select "OPEN" where it says PDA. select the archive you downloaded before. (the one with the name *I8190XXALK6_I8190XEFALK1_HOME_ROOTED.tar.md5*) (you have to uncompress that item before using it)
5. then you press start in Odin, and wait 'til the instalation finishes. the your device should reboot and odin should show a message saying PASS!
6. then you should be able to boot your device like you do normally.
EXTRA STEPS JUST IF YOU HAVE ANY ERROR​
1. if you cant boot, you will need to WIPE your device instaling this archive and use it like in step 4 through the PDA button.
2. if you still have any problem, you should install this following step 4.
how your device should look like
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any problem or suggestion, please comment and thank.

This will install an older December rom! I'm afraid it's a step back, and bad advice.
Most countries have moved on from the LL2 rom in that file.
The instructions also mention the LK6 rom, which is even older, and not attached above.

this is avicoh first rooted rom and it was posted here on the forum long ago. I dont know why u reposted, to be honest i wayted for u to post but thought u come up with another solution that doesnt include Odin.
Best regards,

Yeah this isn't anything new, I and everyone here thought there was some kind of new ROOTING method. The Rom is already Rooted.
Sent from my GT-I8190 using xda premium

This has been covered before in the correct forum. Read before posting.

Posted in the wrong topic, my apologies to mod's.

Failed to install Aroma file manager on Samsung S5

Hello. This is my first post on this forum so please correct me should i post this in the wrong cathegory or use wrong tags etc
I followed the straight-forward guide i find here: http://forum.xda-developers.com/showthread.php?t=1646108
Using the recovery mode on a Samsung S5 i have the option to "Apply update from external storage" and i find the .zip file under this tab and if i try to apply the update i get the following message:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've been trying this three times but i get the same error. I tried to search if other experienced the same problems but i found no similar threads.
Fyi this is on a non-rooted S5. It belonged to my grandmother which recently passed away and we are stuck trying to retrieve the photos on the device and this seemed like the best way. If there is any other way to retrieve these photos from a S5 with a pattern lock i will gladly accept any suggestions USB Debugging is obviously turned off on this phone -_-
Thank you!

You need root, a custom recovery and a terminal emulator as it seems to do this. Btw i`am sorry for your grandmother. Best is to flash a custom recovery with Odin, flash the latest superSU.zip in recovery . Reboot and install a terminal emulator from Play and follow the guide. Turn on usb debugging too.

gee2012 said:
You need root, a custom recovery and a terminal emulator as it seems to do this. Btw i`am sorry for your grandmother. Best is to flash a custom recovery with Odin, flash the latest superSU.zip in recovery . Reboot and install a terminal emulator from Play and follow the guide. Turn on usb debugging too.
Click to expand...
Click to collapse
Thank you for quick response
I am however very new to the the concept of rooting, and im not sure what all those programs you just mentioned are and how i use them
Could you post me a link to what programs i need, and exactly how i use them?

Please help me for apgrade or root 8227L_demo

Hello my friends. I have an android hand unit like the one on the link.
https://www.aliexpress.com/item/33035372080.html?spm=a2g0s.9042311.0.0.25a64c4dPPWPHj
I need to do firmware update οr to rout this HU.
Here's a difference in the model's name... The factory information is different from the CPU-Z information.
The seller of course does not help. He forcefully responds to messages and does not understand.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I only ask you 2 things.....Do a firmware upgrade or root the device.
The main problem is the radio application. While I have English as my primary language, the radio only holds Polish and does not have a good signal.
Please Help me

any help?

Look for this instruction in 4pda.ru forum https://4pda.ru/forum/index.php?showtopic=936535&st=11880
Easy! For some reason, it is not described in detail and simply here.
I will try:
- download our scatter file to the computer (laptop);
- Download FlashTool with SP_Driver_v2.0 (firewood) and install on the computer (laptop);
- Download SuperSU.zip and throw in the root of the body;
- Download Android Terminal and install on the body;
- Download also TWRP, this one came up to me, the rest mirrors;
- rename TWRP to recovery.img - this is important!
- we throw recovery.img next to our scatter file;
- open FlashTool, load our scatter file, see that the checkmark is only on recovery! ;
- further according to the scheme as described on the forum - click Download, connect the switched off body and wait for success!
Success will be, of course, if the firewood is already standing and the dad-dad cord is whole.
- Now you need to reboot into recovery. to do this, turn on the body, launch Android Terminal, give the reboot recovery command;
- from TWRP we put zip SuperSU;
- ALL! We reboot and rejoice.
I hope it turned out simple and clear. Good luck!
Click to expand...
Click to collapse

Can I switch to a different luacher or operating system?