Related
I have been upgrading a friend's Blade but I've run into trouble. I rooted the froyo firmware and flashed CWM. Now if I try to boot into recovery via "adb reboot recovery" it somewhat works but if I try to get into the recovery via Vol - + Power it doesn't. It just gets stuck at splash screen and won't bulge. But if I have flashed a stock recovery I can boot into FMT. This is not the end of it though.
I went on to flash CM9 KonstaKANG release but wanted to do a reflash after doing TPT conversion, the TPT part went fine but now I later realised that I can't get into CWM. So...I got stuck. I flashed a Gen 2 stock via Windows and flashed a TPT image.bin I found that contained a stock 2.3.5 firmware. Brilliant, life saved...no? Turns out I can't root it, so I can't flash a custom recovery to it and boot into it in order to flash CM9. So....I did a bunch of other stuff and at this point the blade has a CWM recovery which I can't boot into, empty system partition and pretty much a boned status. I thought I'll flash a stock 2.2 TPT which I found at: http://amphoras.co.uk/downloads/blade-tpts but the one with a ROM are in some other format than TPT and I can't figure out how to flash them. Can anyone help me here?
Install rom manager (available in google play as a freeware) then flash clockwork mod recovery.
Now u can enter recovery with just 1 tap ie "reboot into recovery"
NOTE USB debugging should be enabled at all times
Add on:
You can root ur phone using an app named z4root.
To permanently root it search google and click the android modaco link
Sent from my Blade using xda app-developers app
Dragooon123 said:
I have been upgrading a friend's Blade but I've run into trouble. I rooted the froyo firmware and flashed CWM. Now if I try to boot into recovery via "adb reboot recovery" it somewhat works but if I try to get into the recovery via Vol - + Power it doesn't. It just gets stuck at splash screen and won't bulge. But if I have flashed a stock recovery I can boot into FMT. This is not the end of it though.
I went on to flash CM9 KonstaKANG release but wanted to do a reflash after doing TPT conversion, the TPT part went fine but now I later realised that I can't get into CWM. So...I got stuck. I flashed a Gen 2 stock via Windows and flashed a TPT image.bin I found that contained a stock 2.3.5 firmware. Brilliant, life saved...no? Turns out I can't root it, so I can't flash a custom recovery to it and boot into it in order to flash CM9. So....I did a bunch of other stuff and at this point the blade has a CWM recovery which I can't boot into, empty system partition and pretty much a boned status. I thought I'll flash a stock 2.2 TPT which I found at: http://amphoras.co.uk/downloads/blade-tpts but the one with a ROM are in some other format than TPT and I can't figure out how to flash them. Can anyone help me here?
Click to expand...
Click to collapse
Heh, not only have you screwed up CWM, you also converted your phone into a GEN3 phone in the process (by flashing that 2.3.5 TPT).
Easiest way to fix it:
1, download: http://bit.ly/yUi4Nu (stock partition layout, if you want a 160MB system layout use: http://bit.ly/wEO8Im )
2. unpack it to your sdcard (/image/image.bin)
3. flash it like you would any TPT
You should have CWM installed at this point (just press and hold vol- during bootup) and now you can flash whatever ROM you want to.
Orange Reyo(ZTE Blade Q Maxi) STOK ROM BACKUP
Download
here you have a backup from stock rom of Orange Reyo (romanian version)
backup have stok recovery and stok files with some Orange apk's missing
with this you can restore your phone to factory rom and setings
rom will boot in romanian but i think you will be abble to set your language(if not, just ask me)
the backup wil be instaled with SPflashTool
in the downloaded package you will find the rom backup zip and the SPflahTool zip
extract both
hope you have the drivers instaled on the pc
-charge the battery, min 50% and turn OFF the phone
-open SPflahTool
-sellect the scatter file from Orange Reyo backup
all files will be charged automatical
#########################################################################
###### if you want to flash just recovery, uncheck all others files except recovery ######
#########################################################################
############# or uncheck all unwanted files to keep the desired files ###############
#########################################################################
- press DOWNLOAD
- conect the phone to the pc
and the instal proces should START
when is done, you will see a DONE image
reboot the phone, if it is stuck in bootlogo, reboot the phone in recovery and do a"wipedata factory reset" then reboot again
The install process will not work if the drivers are not properly instaled
Reboot the phone/ set the language
and ENJOY by the stok rom
###### To restore your country stok rom #########
after install that backup, download and copy on sdcard and in the internal storage
your stok rom downloaded from ZTE site (update.zip)
reboot the phone in recovery stok (not CWM custom)
-factory reset
-aply (install) update from sdcard
the process will start and the phone will be restored
if you get error then unroot the rom and try again(on my phone work without unroot)
Hope this will be usefull for all of you
This Backup was made with extraordinary help from mamulos2002
vaserbanix said:
Orange Reyo(ZTE Blade Q Maxi) STOK ROM BACKUP
Download
here you have a backup from stock rom of Orange Reyo (romanian version)
backup have stok recovery and stok files with some Orange apk's missing
with this you can restore your phone to factory rom and setings
rom will boot in romanian but i think you will be abble to set your language(if not, just ask me)
the backup wil be instaled with SPflashTool
in the downloaded package you will find the rom backup zip and the SPflahTool zip
extract both
hope you have the drivers instaled on the pc
-charge the battery, min 50% and turn OFF the phone
-open SPflahTool
-sellect the scatter file from Orange Reyo backup
all files will be charged automatical
#########################################################################
###### if you want to flash just recovery, uncheck all others files except recovery ######
#########################################################################
############# or uncheck all unwanted files to keep the desired files ###############
#########################################################################
- press DOWNLOAD
- conect the phone to the pc
and the instal proces should START
when is done, you will see a DONE image
reboot the phone, if it is stuck in bootlogo, reboot the phone in recovery and do a"wipedata factory reset" then reboot again
The install process will not work if the drivers are not properly instaled
Reboot the phone/ set the language
and ENJOY by the stok rom
###### To restore your country stok rom #########
after install that backup, download and copy on sdcard and in the internal storage
your stok rom downloaded from ZTE site (update.zip)
reboot the phone in recovery stok (not CWM custom)
-factory reset
-aply (install) update from sdcard
the process will start and the phone will be restored
if you get error then unroot the rom and try again(on my phone work without unroot)
Hope this will be usefull for all of you
This Backup was made with extraordinary help from mamulos2002
Click to expand...
Click to collapse
hello ,
i flashed it via SP flash tool ..succesfully but i got bootloop and cant access recovery ...any suggestion ?
zaxxpp said:
hello ,
i flashed it via SP flash tool ..succesfully but i got bootloop and cant access recovery ...any suggestion ?
Click to expand...
Click to collapse
you followed carefuly all steps?
Trimis de pe al meu SM-J500F folosind Tapatalk
vaserbanix said:
you followed carefuly all steps?
Trimis de pe al meu SM-J500F folosind Tapatalk
Click to expand...
Click to collapse
dont know only about battery cuz i got bricked phone :/
I find Stock rom for ZTE Blade Q Maxi on this Site
kinotube.info/channel/watch/lOg52L-wBsQ
----
mega.nz/#!w8x3iADC!OsNuOELkG5SE9z5cu-gvyaIQxqFCssMmc4_GxR1W-BI
pass __ gem-flash
----
There is stock rom for ZTE Blade Q Maxi with which can move apps from phone to SD card.
But it's a full of Viruses, adware, malware and hijacking trojans.
If someone know how to remove viruses and others stufs. Or find what was change in android to be able move to SD Card, and put that change in regular clear stock rom?
I'm also followed these instructions step by step and got bootloop and cant access recovery... is there any solutions now ??
How to install update.zip from zte official site localized for polish users?
Vchornyy12 said:
How to install update.zip from zte official site localized for polish users?
Click to expand...
Click to collapse
copy the update .zip on sdcard and/or in internal(i dont remember well in wich partition recovery read the updates)
reboot the phone in recovery stok(not custom or TWRP)
do "wipe data factory reset"
select "install updates from sdcard"
select "yes"
and let the recovery to install
then reboot!
bro i dont know but i bricked 2 boards already ... how can i verify my board to see if its really zte blade q maxi ? pff ( ce drq ? )
Finally i flashed this stock rom but its stuck right after orange logo . I formated via sp flash tool and still stuck. Do i need to root and install custom rom ?
Winchester1995 said:
bro i dont know but i bricked 2 boards already ... how can i verify my board to see if its really zte blade q maxi ? pff ( ce drq ? )
Finally i flashed this stock rom but its stuck right after orange logo . I formated via sp flash tool and still stuck. Do i need to root and install custom rom ?
Click to expand...
Click to collapse
just pull out the battery and look under it
should be written there you phone model and imei
Sent from my Moto G5s using Tapatalk
vaserbanix said:
just pull out the battery and look under it
should be written there you phone model and imei
Sent from my Moto G5s using Tapatalk
Click to expand...
Click to collapse
i cannot enter recovery mode i even flashed twrp sucesfully and i still cannot enter recovery. Phone remains blocked at logo after orange appears on screen. i even used hot air blower on it and still the same issue
Good morning everybody.
I have a rooted Galaxy xcover 2 with link2sd installed in order to solve the classic memory issue problem. The program gave me troubles in moving apps to the sdcard, so i read on the internet that i should format the sdcard properly in order to use it.
Afer followind the procedure of the tool, my phone got stuck in boot.
I can still use download mode and odin works, but
-If i flash the stock rom, i cannot anymore access cwm recovery
-if i flash cwm recovery, the boot sequence let me access ONLY the recovery (like there is no rom inside).
when i try to wipe from cwm, it says it can access to cache and data partitions.
I think that the tool damaged somehow the partitions of my phone. How can i fix that?
I've been oversecure while flashing and i didn't make any nandroid of my phone. Can anyone give me one?
your help is veery appreciated,
Thank you!
PS: if you need to looki inside the tool code, there is a file called "dos.sh", but i didn't find anything particular
I have this problem when flashing to the stock rom. Maybe try this :
kadooosh said:
For those trying to install this or another rom and having the no signal(no smallband) problem. This worked for me on 2 xcovers.
Install cmw: http://theunlockr.com/2014/02/27/install-clockworkmod-recovery-samsung-galaxy-xcover-2-gt-s7710/
Root it: http://theunlockr.com/2014/02/27/root-samsung-galaxy-xcover-2-gt-s7710/
Now normally you can install the custom rom now(vanir). If you do you probably get no signal.
Start odin and flash this file : S7710XXAMB6_S7710OXEAMB3-20130713.tar.md5
I found it on this site: http://www.ulozto.cz/xHADj5PD/samsung-7z
If its dead you can pm me and I can send it.
After I flashed this the phone would just go in a bootloop.
Don't be afraid this is normal.
Now install the vanir rom in the cmw recover mode.
After this it should work fine.
Add a microsd card with 2 partitions and install mount2sd and you have a fully working phone with(almost) unlimited space.
I'm using if for an year now and it works great.
Better then most €500 phones which break after 1 fall .
Click to expand...
Click to collapse
kadooosh said:
I have this problem when flashing to the stock rom. Maybe try this :
Click to expand...
Click to collapse
does it matter if your phone is an XXAMB or not? my phone is Xcover 2 is S7710XXAMD2
:crying: My device boots in CHERRYVIEW D1 PALTFORM/INTEL (CHTTYETI.X64************) ((something like Windows BIOS??)
And that all.
I tried Platform Flash Tool Lite but missing flash.xml file. but even I am not sure it will work...
any advice or other solution please....
mmusaad said:
:crying: My device boots in CHERRYVIEW D1 PALTFORM/INTEL (CHTTYETI.X64************) ((something like Windows BIOS??)
And that all.
I tried Platform Flash Tool Lite but missing flash.xml file. but even I am not sure it will work...
any advice or other solution please....
Click to expand...
Click to collapse
what did you flash and what did you exactly do?
Hi
I have twrp backup..
I wiped everything using twrp...
Then restore my backup..
in restoring option I had two bootloaders I removed first bootloader and used the second bootloader..
Also I removed data backup...
Then it start to load only bios screen
mmusaad said:
I have twrp backup..
I wiped everything using twrp...
Then restore my backup..
in restoring option I had two bootloaders I removed first bootloader and used the second bootloader..
Also I removed data backup...
Then it start to load only bios screen
Click to expand...
Click to collapse
shouldn't have done that...think the bootloader you removed is the android one, while the other one might be the bios.
here is a link to some rom with flashfiles....i can't tell you how to flash because all the instructions are in chinese. there are different flashfiles, which peform different ways of flashing the system, eg. without deleting data, or without updating the bootloader.
maybe it's 'flash_factory_update_pos_bootloader' - my guess it only updates the bootloader partitions...if it works and you have a bootloader again you could probably load recovery again and restore your system / data.
(you might use 'flash factory 1st stage' and ' flash factory 2nd stage' as well (i think those flash the whole system again, but I'm not sure. it's just a guess.)
hope you will manage it
look at the flash_guide.docx, it's in chinese but with google translator you can get some information about it.
to use the flash tool i think you must boot into dnx fastboot mode...hold 'volume up' + 'volume down' + 'power' to get into dnx mode (yes, pressing vol up and vol down at the same time works!)
maybe
Hi
danjac said:
shouldn't have done that...think the bootloader you removed is the android one, while the other one might be the bios.
here is a link to some rom with flashfiles....i can't tell you how to flash because all the instructions are in chinese. there are different flashfiles, which peform different ways of flashing the system, eg. without deleting data, or without updating the bootloader.
maybe it's 'flash_factory_update_pos_bootloader' - my guess it only updates the bootloader partitions...if it works and you have a bootloader again you could probably load recovery again and restore your system / data.
(you might use 'flash factory 1st stage' and ' flash factory 2nd stage' as well (i think those flash the whole system again, but I'm not sure. it's just a guess.)
hope you will manage it
look at the flash_guide.docx, it's in chinese but with google translator you can get some information about it.
to use the flash tool i think you must boot into dnx fastboot mode...hold 'volume up' + 'volume down' + 'power' to get into dnx mode (yes, pressing vol up and vol down at the same time works!)
maybe
Click to expand...
Click to collapse
Thanks hope it will work.
if you have an alternative download link as this link is really slow...
mmusaad said:
Thanks hope it will work.
if you have an alternative download link as this link is really slow...
Click to expand...
Click to collapse
not at the moment...
can you once more explain in detail what you did and how you ended up having no bootloader anymore.
i'm still trying to figure out how you were left with no bootloader (can you post a picture of that ?bios?).
i just want to know whether this is somehow related to the ported twrp. from my knowledge there's no way to wipe the bootloader or whatever.
thx in advance
Hi
First thanks I used Platform Flash Tool Lite downloaded from intel website and flash the file it complete 75% but then faild. However it started on logo screen where I immediately but it in dxn mode and booted twrp and it worked. Still WIP. I will update you of the outcome.
As for how it happened... as I mentioned earlier I wiped everything using twrp and selected advice option where you select cache, system, internal memory, etc...
And restore twrp earlier backup but I modified the backup data stored in my pc it had bootloader and bootloader1.. then I removed first bootloader and renamed bootloader1 to bootloader. During twrp restoration process, twrp read my backup and shown me the folders that will be restored, there I noticed that I succeeded on having only one bootloader and also unchecked the data folder and restored it. Where it ended on attached screen...
mmusaad said:
First thanks I used Platform Flash Tool Lite downloaded from intel website and flash the file it complete 75% but then faild. However it started on logo screen where I immediately but it in dxn mode and booted twrp and it worked. Still WIP. I will update you of the outcome.
As for how it happened... as I mentioned earlier I wiped everything using twrp and selected advice option where you select cache, system, internal memory, etc...
And restore twrp earlier backup but I modified the backup data stored in my pc it had bootloader and bootloader1.. then I removed first bootloader and renamed bootloader1 to bootloader. During twrp restoration process, twrp read my backup and shown me the folders that will be restored, there I noticed that I succeeded on having only one bootloader and also unchecked the data folder and restored it. Where it ended on attached screen...
Click to expand...
Click to collapse
if you can access twrp again, just restore your backup as it is...all partitions without changing anything.
good luck. hope it works.
now people know how to get to the bios/bootmanager (maybe it helps for dual boot)
do you know what options there were, something like boot from sdcard/otg (usb) etc...?
Hi
There where two options
Android IA
EFI Hard Disk
As for my issue I was able to boot twrp and restore my backup..
But it seems I played around bios screen which ended up not showing bootloader or recover option even bios....
It's feel like something running but not showing in the scteen. Is there any way to reset bios or a stock rom to restore the device like out-of-box status....
Hi
mmusaad said:
There where two options
Android IA
EFI Hard Disk
As for my issue I was able to boot twrp and restore my backup..
But it seems I played around bios screen which ended up not showing bootloader or recover option even bios....
It's feel like something running but not showing in the scteen. Is there any way to reset bios or a stock rom to restore the device like out-of-box status....
Click to expand...
Click to collapse
I found out that it was running through HDMI output in the initial boot and it will not show in the tablet screen..
I did it again with bootloader modification and got the BOIS mode and connecting my tablet to LED TV through HDMI output I managed to reset the bios and got it back to normal (know boot showing in my tablet screen...)
When i flash the file you share and used flash/blank setting it will reach 80 to 85% but fail in bootloader flashing. then i used DXN mode and fastboot flash twrp recovery it will bring the main service options where I did factory reset then it will start loading with little screen corruption. however it will load perfectly after couple of reboots but without the Halo Keyboard. i could not find out how to enable it...
Then i used my TWRP backup and restore it where everything working fine....
My request is it possible to modify the flash-able file you send to load a perfect stock rom. it will help many people as it will be easy to use with Intel android flash tool...???
Thanks mmusaad and danjac, glad that you unbricked it.
Can I ask how does one flash it with Platform Flash Tool Lite? I failed to infer the meaning of 'setup your board' from intel's description:
> You have already set up your board and connected the board to your host system. This includes assembling your board, installing the appropriate drivers, and flashing your firmware.
(I'm trying to run or install Linux on yogabook, which I feel may brick it a few times.)
Also, do you think one can enter the BIOS setting or boot device selection without bricking it first?
thanks
Hi
momocraft said:
Thanks mmusaad and danjac, glad that you unbricked it.
Can I ask how does one flash it with Platform Flash Tool Lite? I failed to infer the meaning of 'setup your board' from intel's description:
> You have already set up your board and connected the board to your host system. This includes assembling your board, installing the appropriate drivers, and flashing your firmware.
(I'm trying to run or install Linux on yogabook, which I feel may brick it a few times.)
Also, do you think one can enter the BIOS setting or boot device selection without bricking it first?
thanks
Click to expand...
Click to collapse
Try installing this file it suppose boot correctly...
https://software.intel.com/system/files/managed/1e/e8/IntelAndroidDrvSetup1.10.0.zip
mmusaad said:
Try installing this file it suppose boot correctly...
https://software.intel.com/system/files/managed/1e/e8/IntelAndroidDrvSetup1.10.0.zip
Click to expand...
Click to collapse
Thanks, I was able to flash with FlashToolLite (linux). The only problem is that my halo keyboard stopped working (maybe rom dismatch? My yogabook is from japan).
Anyway thanks /o\
momocraft said:
Thanks, I was able to flash with FlashToolLite (linux). The only problem is that my halo keyboard stopped working (maybe rom dismatch? My yogabook is from japan).
Anyway thanks /o\
Click to expand...
Click to collapse
Did you have any TWRP backup.?
I have faced the same issue the solution was to restore boot & country img. Or one of them....mmmm I forgot...
danjac said:
shouldn't have done that...think the bootloader you removed is the android one, while the other one might be the bios.
here is a link to some rom with flashfiles....i can't tell you how to flash because all the instructions are in chinese. there are different flashfiles, which peform different ways of flashing the system, eg. without deleting data, or without updating the bootloader.
Click to expand...
Click to collapse
Greetings to all.
@danjac: Could you provide a link to a YB1-X90F ROM? I would like to try flashing it on a chinese version model. @mmusaad: please excuse my irrelevant to the subject request.
mmusaad said:
First thanks I used Platform Flash Tool Lite downloaded from intel website and flash the file it complete 75% but then faild. However it started on logo screen where I immediately but it in dxn mode and booted twrp and it worked. Still WIP. I will update you of the outcome.
As for how it happened... as I mentioned earlier I wiped everything using twrp and selected advice option where you select cache, system, internal memory, etc...
And restore twrp earlier backup but I modified the backup data stored in my pc it had bootloader and bootloader1.. then I removed first bootloader and renamed bootloader1 to bootloader. During twrp restoration process, twrp read my backup and shown me the folders that will be restored, there I noticed that I succeeded on having only one bootloader and also unchecked the data folder and restored it. Where it ended on attached screen...
Click to expand...
Click to collapse
wow , how did you manage to get into bios and boot from usb ? , i want it too
you can explain how did you get that bios image ? , i have rooted my device , and want to trying to install a stable linux system that will works with the yoga book , i got the yoga book android version
sagi232123 said:
wow , how did you manage to get into bios and boot from usb ? , i want it too
you can explain how did you get that bios image ? , i have rooted my device , and want to trying to install a stable linux system that will works with the yoga book , i got the yoga book android version
Click to expand...
Click to collapse
What you ask for was only a few clicks away my friend:
https://forum.xda-developers.com/yoga-book/how-to/yoga-book-gnuroot-debian-t3580358
sagi232123 said:
wow , how did you manage to get into bios and boot from usb ? , i want it too
you can explain how did you get that bios image ? , i have rooted my device , and want to trying to install a stable linux system that will works with the yoga book , i got the yoga book android version
Click to expand...
Click to collapse
Hi sagi232123,
I will explain it to you in detail.
I taken a full backup using twrp.
Then I notice two bootloaders.
First named bootloader. "note: I don't remember the full file name."
Second named bootloader1.
I removed bootloader.
Renamed bootloader1 to bootloader using my PC.
Then restored using twrp again, I restored it fully.
Here I was shocked when it load the bios.
Do it and it should do the same.
nan0s7 said:
What you ask for was only a few clicks away my friend:
https://forum.xda-developers.com/yoga-book/how-to/yoga-book-gnuroot-debian-t3580358
Click to expand...
Click to collapse
this is diffrent , running linux through android , i want to run from bios without android
https://forum.xda-developers.com/yoga-book/how-to/boot-bios-how-to-android-t3593340
this is the tut
Hello, I also had a brick problem. I managed to flash the firmware of 270916 then the OTAs until the last of April 28th. All works fine, Halo keyboard, wifi etc but the problem is that tablet no longer recognizes the sim card! Om settings the Sim option are greyed. Any help?
Hello there, I m currently using Lenovo A6000+ running on KitKat , my phone is rooted and I have TWRP recovery installed in it.
When I rooted my phone for the 1st time, I was on lolipop stock room.After root I got stuck on boot logo, for which I took my phone to a technician and he returned me all new root removed phone running on kitkat, I have again rooted my phone. But after rooting it again my system started using all of my internal storage.
Plzz provide me with help...I m in urgent need of it
I m posting screenshot of my internal storage.
rguhe996 said:
Hello there, I m currently using Lenovo A6000+ running on KitKat , my phone is rooted and I have TWRP recovery installed in it.
When I rooted my phone for the 1st time, I was on lolipop stock room.After root I got stuck on boot logo, for which I took my phone to a technician and he returned me all new root removed phone running on kitkat, I have again rooted my phone. But after rooting it again my system started using all of my internal storage.
Plzz provide me with help...I m in urgent need of it
I m posting screenshot of my internal storage.
Click to expand...
Click to collapse
FActory reset your phone.I ALSO FACED THIS PROBLEM.
mr.anonymous12 said:
FActory reset your phone.I ALSO FACED THIS PROBLEM.
Click to expand...
Click to collapse
Bro I have tried this.
No results.
Can you falsh a ROM ...? Try flashing a ROM by wiping system data etc...
anavind said:
Can you falsh a ROM ...? Try flashing a ROM by wiping system data etc...
Click to expand...
Click to collapse
I wanted to flash a rom, but bcoz of low internal storage I m quite doubtful that whether shall I flash a custom rom or not.
Plzz tell me that whether it's safe to flash a custom ROM with having such problem in my internal storage..???
Plzz help.
rguhe996 said:
I wanted to flash a rom, but bcoz of low internal storage I m quite doubtful that whether shall I flash a custom rom or not.
Plzz tell me that whether it's safe to flash a custom ROM with having such problem in my internal storage..???
Plzz help.
Click to expand...
Click to collapse
Flash TWRP Recovery and then boot into it. After that, you can WIPE your internal storage to free space. Then you don't have to worry regarding memory.
1- Flash twrp on your phone using adb.
2 -Boot into recovery but don't remove the usb connection.
3 -Clear all data, cache, internal, etc. (Do this only if you have backed up important data.)
4 -Have a stock rom (or the rom you are trying to install) downloaded on the pc.
5 -After you have cleared the data, move the rom from the pc to your phone.
6 -After the rom has been moved, remove the connection and flash it.
7 -Do this after you confirm everything works. (twrp, the rom, etc.)
Also, I urge everyone who wants to flash their phone to have stock android rom backed up on your pc, always.
In case anything goes wrong you can always flash stock rom and start over again.
rguhe996 said:
Bro I have tried this.
No results.
Click to expand...
Click to collapse
Hey use twrp and format your internal storage will be fine
AKJPSKKO said:
Hey use twrp and format your internal storage will be fine
Click to expand...
Click to collapse
Will u plzz explain a little dip.
Steps wise wolud a great help..
rguhe996 said:
Will u plzz explain a little dip.
Steps wise wolud a great help..
Click to expand...
Click to collapse
I have TWRP installed in my device.
TWRP 2.8.0
rguhe996 said:
I have TWRP installed in my device.
TWRP 2.8.0
Click to expand...
Click to collapse
-1- Download stock ROM on your PC.
-2- Boot into twrp, preferably through adb command. ('adb reboot recovery')
-3- Do not remove the usb cord, and once the device is booted into recovery type 'adb kill-server'. You don't need adb now but don't unplug your device from PC.
-4- Once into recovery, clear everything. (Data, cache, internal, etc.)
Note - This will clear everything, even the OS. If you don't have external sd card wiping external will result in error. Don't worry.
-5- Having your android connected to the phone, copy & paste the stock ROM folder into your internal storage on PC.
-6- After it has been moved, you can unplug your phone and flash the stock ROM via recovery.
You can delete the stock ROM zip file in your phone to free up space using any file manager, if you have said ROM backed up on your PC.
You will lose all your data so have a backup of important data. Also your phone will be made as new, so you will have to flash recovery again, root again, etc.
You can find stock ROM on 'techolite.com'. Just search 'a6000 stock rom updated frequently' and you will find it.
Download the one pertaining to your model.