Related
So, I've been up all night after buying this Fire trying to fix it, and I've decided to go along with my original decision to just return it. I'll rewind a bit to give you guys a play by play to show how I got to what I've determined is a FUBAR situation, and hopefully you guys can help me at least remove TWRP so I can return it without much issue.
If it's tl;dr, I bolded the main errors I got from the console and TWRP
1. I purchased my Kindle Fire from Best Buy with a 1 Year Protection plan, so in all reality, I could just break it in half and get a replacement, but I don't necessarily want a replacement.
2. I initially purchased it for my mom, but when I found out that the stock Fire OS didn't have Korean input or the option to have a Korean interface, I did a bit of research and started reading up on how to root, how to install the market, things like that. My mom's not a native English speaker, so this was an important thing for her, etc etc.
3. I read multiple guides on this forum and others, and rooted using the guide found here , since a few of the threads I was reading through seemed to point in that direction, and I had a bad experience with SOCR on my Droid X.
4. The root was successful, so I moved on and used KFU .3 to do the rest of the important bits; android market, etc etc.
5. Everything was working fine, but, after looking through it, I realized that it wouldn't work for what I needed it to, and I would have to return it, so, I attempted to unroot the tablet using TWRP's interface.
6. I cleared the cache, the devlak cache, and system wiped, then restored using the system restore point in the TWRP folder, figuring after that, the Kindle would boot up with stock OS and then I would just system restore the default way. This method got me stuck in a recovery-loop, and no matter what I did, the Fire always booted to recovery mode.
7. I figured I had bricked it, so I followed the steps in this guide, but always seemed to have problems at the step where I have to chmod 755 of the zergRush. I get "Not a directory" error, which after doing some research, I believe is on account of me no longer having rw privilege?
8. I looked around some more, ignoring that guide, and found a method to force-push the amazon update, but TWRP would no longer run the update, saying it could not Mount the SD Card due to an Invalid Argument, and I have yet to determine what that means.
9. After manually changing it to fastboot in an attempt to at least get it out of recovery mode, I have the Fire recognizable as a device in my ADB, but it is now stuck in a fastboot loop, and when I attempt to re-root it in order to give myself rw privileges again, it stalls on "waiting for device" and never gets past that point.
Update
I tried to reroot while the Fire was stuck in the Kindle Fire splash screen using the KFU tool, and used zergRush, but the error message I got was - exec '/system/bin/sh' failed: No such file or directory (2) - 4 times over.
What I think the problem is, is that when I wiped the cache/devlak cache/ and system reformatted, it wiped my SU privileges, and as a result, no longer allowed me to write the backup to the Fire, therefore leaving me in a perpetual state of limbo?
What I'm asking for from you is;
What can I do to fix this?
Is there any more information you need/want from me?
And finally,
Is there an easy way for me to remove TWRP from the system?
Thank you.
Hi!
There are a lot of great tips regarding TWRP and fastboot over at RootzWiki.
Some users are reporting the same fastboot loop that you currently experience. I suggest you read the thread and follow the suggestions. One suggestion which you may want to try first is the one in this post.
Thank you for the reply. I did as you suggested and followed the links and the post on the guide, and although that did change the nature of my fastboot loop, I'm still stuck in a fastboot loop.
I was initially stuck in a fastboot loop on the Kindle Fire logo, which I determined by running fastboot devices, while it was stuck on that logo, and it showed the device as being fastboot. After following that guide, and using the hard reset, then using the "How to Unbrick" in order to change back to a normal boot, I'm stuck in a fastboot loop on the TWRP splash screen of a triangle with a fire in it. I'll continue looking through the guides to see if I can solve the problem, but thank you once again, and sorry for not clarifying which type of fastboot loop I was in.
Sorry it didn't work out! However...
isjonamon said:
I'm stuck in a fastboot loop on the TWRP splash screen of a triangle with a fire in it.
Click to expand...
Click to collapse
I really though the solution posted over at RootzWizi would solve this problem. Getting stuck at the yellow triangle is 'common'. I really though adding
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_0100
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_0100&MI_01
Click to expand...
Click to collapse
to android_winusb.inf would solve it. But if you are able to recognize your Fire in fastboot mode via your PC, I guess that's not where your problem is.
Is this tip to any help?
And lastly... the great Kindle Fire Utility thread is worth checking out, in case you haven't already
I hope you'll find a solution to this problem!
I've tried the tip you linked me to, and sadly it didn't do anything for me.
Moving on, though, I'm reading through the KFU thread again to see if there was anything I missed, and decided I might as well try re-flashing to CM7 to see if I can at least get it working up to a rooted/rom standpoint. I figure from there, I can at least have a working platform to factory reset from. If I can't do that... well...
Does anyone know a way to just return everything to factory settings? To just wipe everything and make it so it turns on like it's out of the box? Either through adb commands, or TWRP or anything?
Sorry for the double post, but I managed to get CM7 back up on my Fire, and managed to regain SU access. Can anyone point me to a guide to restoring it back to its former "glory" so I can return it?
Fixed it!!
For anyone interested, this is what worked for me;
From where I ended up with the problem, I followed hachiueno's advice and read through the KFU's thread as well as the TWRP thread on Rootzwiki, that led me to adding those lines to the device firmware, which I think was the first step in the solution, so...
Step 1. Add
%SingleAdbInterface% = USB_Install, USB\VID_18D1&PID_0100
%CompositeAdbInterface% = USB_Install, USB\VID_18D1&PID_0100&MI_01
to android_winusb.inf , then restart your computer with your Fire unplugged.
After that, I was inspired, through reading the KFU thread, to attempt to manually install CM7 since I wasn't having much luck zergRushing on my own, so, I went to the CM7 thread and pushed the Update.zip there, and used my TWRP to install that, effectively rebuilding my filestructure, since it seems the Kindle Fire doesn't have so much as a SH folder in it.
Step 2. MANUALLY (maybe) install CM7 if you can.
Once I got CM7 up and working, using the USB mounting option, I replaced the update.zip in the sdcard folder with the Amazon 6.2 firmware downloaded from their website, renamed to update.zip, and then unmounted my fire from my laptop.
Step 3. Download the Amazon 6.2 Firmware from amazon's website (I can't post...), rename it to update.zip, and replace the CM7 mod update.zip in your /sdcard directory with it.
Then, I figured if I ran TWRP like it was supposed to run, and just ran the update.zip like any other ROM, it should fill in the blanks in the filesstructure, bypassing Amazon's own lack of certain folders, and various other things, filling in the gaps as they were. The next step might be entirely redundant, since I'm a bit clueless, and it might have been entirely luck on my part, but I initially forgot to wipe my cache, devlak cache, and system restore, so I did all that and did it again, and my wishful thinking leads me to believe that doing that saved my ass from having a crapton of errors....
Step 4. Using the install function on TWRP, install the renamed Amazon update.zip, reboot, clear your cache, devlak cache, system reformat, then reinstall the update.zip. Reboot one more time, and you should come up to the Kindle Fire splash screen. Leave it for a few minutes, and it'll be like it just came out of the box.
Thanks for all your help. I love you. Seriously. No homo. Maybe a little. I love you.
Good to hear that you managed to boot it again!
isjonamon said:
Sorry for the double post, but I managed to get CM7 back up on my Fire, and managed to regain SU access. Can anyone point me to a guide to restoring it back to its former "glory" so I can return it?
Click to expand...
Click to collapse
This guide seems to be an easy solution to this. However, no one has replied any success or failure, so not sure if it's 100% bulletproof for everyone... if I were you, I would follow JackpotClavin's guide here. He's a known developer here and knows what he's doing, and many successful replies from users having used this method... so yeah, just to be 'sure' (can you ever be...?) that you won't experience any further problems, I recommend the last one.
I actually used the first guide in order to get the Amazon update, but couldn't post a reply since I'm still a noob. I had to do a few things differently, and ultimately got a few different results, but posted up my own version of the steps.
Once again, thanks for all your help!
It seems to me that the majority of problems people are having are driver related. When I was using KFU to install TWRP it stalled half way through and just said waiting for device. Just had to install drivers again and it happily completed the install.
Sent from my Kindle Fire using xda premium
all u needed do initially was change bootmode it seemed. thrn u went and did all kinds of stuff that wasnt necessary.
sent from my kindle fire
smirkis said:
all u needed do initially was change bootmode it seemed. thrn u went and did all kinds of stuff that wasnt necessary.
sent from my kindle fire
Click to expand...
Click to collapse
I actually changed bootmodes quite frequently, following multiple threads and guides, changing from recovery, to normal, to fastboot, and back and forth when called for. Changing to fastboot stuck me in an eternal fastboot loop, changing to normal reverted me to a recovery loop, and recovery was the only bootmode I could access adb from.
Sheolrock said:
It seems to me that the majority of problems people are having are driver related. When I was using KFU to install TWRP it stalled half way through and just said waiting for device. Just had to install drivers again and it happily completed the install.
Sent from my Kindle Fire using xda premium
Click to expand...
Click to collapse
Driver issues seemed to be part of the problem for me, but just updating the drivers didn't fix the issue entirely. I'm jealous that you got it to work with just a driver update...
Hey i believe im in the same problem but i keep reading the posts and im still stuck and i have no idea what to do im worried that i cant fix it.... Some please help me ASAP
Thanks in advance
wrong boot mode ?
with adb:
adb shell su -c "idme bootmode 4000"
adb reboot
with fastboot:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot reboot
bad drivers ?
http://forum.xda-developers.com/showpost.php?p=20855280&postcount=54
I have had the looping problem and none of these would fix it. I got it to work by adding those lines to android_winusb and running the run.bat, trying to make it switch to normal mode as the kindle was turning on. Somewhere along the yellow triangle when it was loading it accepted the command from KFU. Hope this helps, only thing that worked for me.
the drivers i included contain all the necessary entries in adb_usb.ini and android_winusb.inf
Please can someone help me!?
I did idme bootmode 4002 and now my fire won't boot up or show up in android adb. Any solution?
awidawad said:
I did idme bootmode 4002 and now my fire won't boot up or show up in android adb. Any solution?
Click to expand...
Click to collapse
you switched it to fastboot (4002) - adb commands are not working in fastboot mode !
little guide:
driver (under android phone):
normal & recovery boot: -> android composite adb interface
fastboot: -> android adb interface
here all the possible commands to change bootmode:
with adb (secure kernel):
adb shell su -c "idme bootmode 4000"
adb reboot
or (twrp or unsecure kernel):
adb shell idme bootmode 4000
adb reboot
with fastboot:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
or:
fastboot -i 0x18d1 oem idme bootmode 4000
fastboot -i 0x18d1 reboot
or:
fastboot oem idme bootmode 4000
fastboot reboot
the number is the bootmode you want to switch to:
normal boot -> 4000
fastboot -> 4002
boot to recovery -> 5001
and if you know:
normal boot -> adb commands YES -> fastboot commands NO
fastboot -> adb commands NO -> fastboot commands YES
recovery -> adb commands YES -> fastboot commands NO
then you only have to count 1 and 1 together and can master nearly each hanging situation !
Click to expand...
Click to collapse
Not sure if this is totally helpful to anyone but originally I thought the thread was started with a posting of being stuck bootlooping into twrp in recovery mode with a complete loss of file structure. I had this same issue my Kindle would not start in anything but straight to twrp and if I tried to flash my CM9 ICS rom it was not there and only the twrp folder empty was. So I went to mount and mounted usb storage and moved the stock update zip file from amazon to the twrp folder and flashed that. Worked like a charm now I appear to be straight stock. I am no developer of this stuff I just am a bit of a tinkerer so don't understand all the code stuff but it starts like a normal kindle and appears totally stock. So hopefuly that helps you return your deice to stock for return or to continue wahtever modifications you intend.
2992
Hello all,
I've got a bricked droid, and haven't been able to find a fix that worked in other threads here.
I rooted my droid successfully, and installed GO Launcher EX, along with the android market, and a number of apps from there.
Among those, busybox, metamorph (which i then used to change the wallpaper), titanium backup, etc. I had successfully rebooted after all these installations and after changing the wallpaper.
I was getting on a plane the other day and turned off the KF, and havent been able to get it to boot since.
Originally it was in a boot loop, getting to the kindle fire icon and rebooting every 3 seconds.
I tried using the KFU, but it was unsuccessful at changing the boot mode (drivers were successfully installed).
Failing at that, i tried following the instructions in http://forum.xda-developers.com/showthread.php?t=1414832
After the reboot, it is now just stuck in the kindle fire screen, and i cant run any adb commands, device not found.
Am I straight up screwed now? or anything I might be able to do at this point.
Much appreciated, thanks for any advice.
Do you have fastboot access? Try running the following...
fastboot -i 0x1949 oem idme bootmode 4000
Try this: http://forum.xda-developers.com/showthread.php?t=1422832
Thanks guys, ill try those and post back w the results.
so i tried fastboot -i 0x1949 oem idme bootmode 4000
and it seems to have been successful, in that it is now back to its original boot loop state. however, it is still not booting fully.
it seems that adb commands are now working, i can do adb shell, and navigate root folders (system etc).
zombie, i havent had much luck with that route, i had tried that earlier.
I've seen people mentioning that the cause for their brick had something to do with permissions, so i did ls -l in the adb shell, here are the permissions for some of the relevant folders. if there are any others that might be helpful, let me know.
root -> drwx------
system -> drwxr-xr-x
sdcard -> lrwxrwxrwx
oh and framework-res.apk -> -rw-r--r-- (same as all other files in that directory)
i did modify the framework-res to change the background image. it successfully booted at least once after the modification - i used metamorph, i loaded the file, then rebooted for it to take effect. this was successful, but i believe it was the next reboot which did my kindle in, so possibly related.
i rambled a bit, but maybe if i replaced the current framework-res.apk with the stock framework-res.apk, that might be worth trying? are all stock framework-res.apk files the same at stock? because i don't have a copy of the original that came with my kindle.
i would go back into fastboot and then flash over TWRP... and then reinstall your os from scratch. it would probably be easier than trying to root around fixing it from the inside.
Thanks xrishox, I might do that. Is there a thread detailing how to do that?
When I tried doing fastboot I lost the ability to use adb commands so I'm not sure how to go about flashing twrp.
Download the fbmode binary and TWRP image. Then run the following.
Code:
adb push fbmode /data/local/temp
adb shell /data/local/tmp/fbmode
arbiter reboot
Your device should reboot and be stuck on the Kindle bootscreen. You are currently in fastboot mode. Now run the following...
Code:
fastboot -i 0x1949 poem idme bootmode 4000
fastboot -i 0x1949 boot twrp-blaze-2.0.0RC0.image
Your device will reboot after that last command. It will boot into the TWRP installer. When it completes, tap "Reboot". Then boot into TWRP recovery and install the factory update, or a custom image that won't replace FireFireFire and TWRP.
jackofaiitrades said:
Hello all,
I've got a bricked droid, and haven't been able to find a fix that worked in other threads here.
I rooted my droid successfully, and installed GO Launcher EX, along with the android market, and a number of apps from there.
Among those, busybox, metamorph (which i then used to change the wallpaper), titanium backup, etc. I had successfully rebooted after all these installations and after changing the wallpaper.
I was getting on a plane the other day and turned off the KF, and havent been able to get it to boot since.
Originally it was in a boot loop, getting to the kindle fire icon and rebooting every 3 seconds.
I tried using the KFU, but it was unsuccessful at changing the boot mode (drivers were successfully installed).
Failing at that, i tried following the instructions in http://forum.xda-developers.com/showthread.php?t=1414832
After the reboot, it is now just stuck in the kindle fire screen, and i cant run any adb commands, device not found.
Am I straight up screwed now? or anything I might be able to do at this point.
Much appreciated, thanks for any advice.
Click to expand...
Click to collapse
Howdy!
I recently just dealt with this same issue. My KF was stuck in boot loop and wouldn't be recognized by my computer. I left it in bootloop until it ran out of battery. Once it was completely drained, I connected it to my computer and my computer recognized it, I then reinstalled the drivers. Right after that I used KFU to change bootmode to normal boot and let it fully charge! Good to go! Hope this helps someone.
from the op of kfu:
Known Tricks
•If you end up stuck at the yellow triangle, in KF Utility select Boot Normal, wait for it to say <waiting for device> and then press and hold the power button 20 seconds until the fire turns off, then when its off turn it back on. This sometimes happens, I have yet to find a clean solution
•If you end up stuck with a yellow triangle, do not EVER unplug it. Leave it plugged in. Check the windows drivers to make sure it isnt showing as "kindle" again. Fastboot is different and can cause this.
Click to expand...
Click to collapse
and here is a note from vashypooh - the op of kfu
http://forum.xda-developers.com/showpost.php?p=20945694&postcount=506
maybe it helps someone ...
Thanks guys, I won't be near a computer until tonight but will try these out as soon as I get back
lmntone said:
Download the fbmode binary and TWRP image. Then run the following.
Code:
adb push fbmode /data/local/temp
adb shell /data/local/tmp/fbmode
arbiter reboot
Your device should reboot and be stuck on the Kindle bootscreen. You are currently in fastboot mode. Now run the following...
Code:
fastboot -i 0x1949 poem idme bootmode 4000
fastboot -i 0x1949 boot twrp-blaze-2.0.0RC0.image
Your device will reboot after that last command. It will boot into the TWRP installer. When it completes, tap "Reboot". Then boot into TWRP recovery and install the factory update, or a custom image that won't replace FireFireFire and TWRP.
Click to expand...
Click to collapse
Tone you're a life saver, thanks. I'm up and good to go.
good that it's working again !
have you seen this one in the dev section - could save a lot of handwork:
http://forum.xda-developers.com/showthread.php?t=1428428
Also, when I get back to my computer again, ill update my OP to include the solution so that others might benefit. its like a 20 minute fix but took me days to resolve it (largely due to lack of comp access but that's beside the point).
As a disclaimer, I've searched for this question, but have only found when the question is asked as a much broader topic and goes unanswered.
That being said, I can't seem to get TWRP 2.0 installed through using "fastboot boot", the Kindle Fire Utility, or the technique using dd to rewrite the contents of the parttitions.
The closest I've come is getting FIREFIREFIRE to start up using the "dd" technique, but TWRP still will not start when I hit the power button for recovery. And yes, I did use "dd" on the TWRP image file as well.
Also, I even tried using fastboot to flash u-boot.bin onto the bootloader partition, and twrp onto the recovery partition. Still, I can get to the yellow, but no further into starting TWRP.
Any help would be appreciated. At current time, I have the stock bootloader and recovery partitions on the Fire and it is rooted.
Thanks.
maybe your in fastboot mode and hopefully your drivers are installed correctly you can use:
fastboot -i 0x1949 oem idme bootmode 4000
fastboot -i 0x1949 reboot
or
fastboot -i 0x18d1 oem idme bootmode 4000
fastboot -i 0x18d1 reboot
or
fastboot oem idme bootmode 4000
fastboot reboot
this should bring you to normal bootmode
I've tried that in case there was an issue. In fact, if I don't press the power button during the yellow triangle, the Kindle Fire OS will start as normal after 10-15 seconds. So, it looks like the bootloader is working right and I'm in the correct bootmode. But, if I hold down the power on the yellow triangle (which is supposed to start TWRP), I just get stuck and nothing starts.
That being said, I think I'm in the correct bootmode.
if i don't remember wrong there is an issue with installing twrp with dd
i think you could retry the installation or simply use KFU (but don't use the drivers of kfu if you have working ones)
Thanks.. I'll give it another shot tonight, and then.
when the device starts and the Triangle appears, are you just pressing the power button once? or are you pressing it until it turns orange?
I have to press it a few times before it changes color to orange and then just let it alone. A long press doesn't work for me.
I can get it to turn orange. I think the long press worked for me on that one. Though, I do know I did the multiple presses as well and didn't get any further.
Is it possible that it might be goofed up because I used SuperOneClick for the original root on 6.2 instead of KFU?
not possible - had the same - rooted with superoneclick on 6.2 then updated
i think your twrp install failed - would retry
I finally figured out my problem. For whatever reason (which is still unknown to me), the Kindle Fire Utility was not able to properly download the twrp.img. The file that was downloaded was 8K (which I'm guessing was some sort of error web page). Anyway, I went straight to teamw.in and downloaded the latest version that clocked in at around 10MB, installed it via the "fastboot -i 0x1949 boot twrp.img" command and all is well now.
If anybody is having similar problems, you might want to check the size of the twrp.img file. 10M = good, 8K = bad.
vaporofnuance said:
I can get it to turn orange. I think the long press worked for me on that one. Though, I do know I did the multiple presses as well and didn't get any further.
Is it possible that it might be goofed up because I used SuperOneClick for the original root on 6.2 instead of KFU?
Click to expand...
Click to collapse
It turns orange the second it starts booting recovery. That's when you should let go. Holding the power button for ~30 seconds for any reason is a hard signal to the PMIC chip to power off.
good that it works again ...
please mark the subject of the topic (edit first post) to [Solved]
I finally managed to unbrick my KF and reroot it a few weeks ago only for amazon to come out with 6.2.3 or whatever the new version is and of course it unrooted it.
I have a MacBook Pro so I decided to use BreakDroid to reroot my KF.
Well in the process of doing so it installed CWM which has turned into a total monster.
Now my KF will only load to either the Yellow Triangle screen or the CWM-based Recovery menu screen. I keep trying to boot it out of that mode by using
cd /Users/macuser/android-sdk-macosx/tools
./fastboot-mac -i 0x1949 oem idme bootmode 5002
but that just seems to take me to the red CWM menu screen.
Does anybody know how I can get CWM off of my KF for GOOD?
I swear if I see that red menu or that yellow triangle again I'm going to throw it across the room.
Help a girl out?
To change to normal boot, use 4000 or use the following fast boot commands:
fastboot -i 0x1949 oem idme bootmode 4000
or
fastboot oem idme bootmode 4000
then fastboot reboot
Sent from my Amazon Kindle Fire using Tapatalk
Didn't Work
I tried that...it didn't work either. It just brought me back to that stupid yellow triangle.
Since you have cwm, restore your backup or flash your desirable ROM.
Sent from my Amazon Kindle Fire using Tapatalk
=D
You know I actually decided to do that on my own before I read your post and it totally worked! Thank you for giving me the advice though.
I am glad you got your KF working
Sent from my Amazon Kindle Fire using Tapatalk
I tried this but it didn't seem to work for me.
One problem is when I renamed the update to "update.zip" it doesnt show up as a file I can install in TWRP. However, when I actually .zip the update then it shows up.
I used install and it says "installing" with a progress bar, but when I reboot it goes right back into TWRP recovery mode.
My kindle is fully accessible through Kindle Fire Utility, but it will only stay in recovery mode, If I try to put it back into normal mode it gives a message "The system cannot find the drive specified".
I think at some point I deleted the system files using TWRP assuming I could just flash them back. I'm guessing I was wrong at this point.
Any help would be appreciated.
all u had to do, was tap reboot system on cwm. its not twrp, it ain't broken. no adb boot mode changes. just reboot lol
Sent from my HTC Glacier using xda premium
Hey guys,
I'm sorry I couldn't figure out what to do next simply by searching your forum, so I will try to be both as brief and as descriptive as possible.
I started here (http://forum.xda-developers.com/showthread.php?t=1568340) trying to root my fiancee's KF 6.3. I didn't feel comfortable using KFU or similar because those programs are built for Windows and I am using Linux. The Kindle Fire seems to be stuck in a recovery loop. When plugged into USB (using the cable that's actually for my LG Optimus phone), it boots to FireFireFire (yellow triangle) then reboots constantly. At no point is it accessible via adb devices or fastboot, and it doesn't show up under lsusb, which would be the equivalent to not showing up in Device Manager in Windows. (The driver should be fine because all of this was working fine originally when I started the process.)
So I guess my question is what now? I've read a few things about needing a "factory cable" which may set it back into fastboot mode, and I'm pretty sure I could get going again from there. Is that what I need to do? TIA for any help.
PS - I've successfully rooted my LG Optimus S and flashed custom ROMs, so I'm not totally inexperienced. I use Arch Linux and I'm comfortable on the command line. If you have a solution for Windows, I *might* be able to translate it into Linux speak, so don't hold back. Same goes for Ubuntu/Debian - those are totally different than Arch Linux, but I might "get it" enough to translate it.
PPS - I have intentionally omitted information relating to what I was doing when I caused this for brevity, but I would be happy to discuss what steps I took in following the above linked thread if some guru believes it's relevant or someone wants to know.
A factory cable is a last resort kind of thing so I wouldn't jump the gun quite yet, although it doesn't hurt to have one in the first place.
It would be helpful to know which step in the rooting process things went awry. The constant rebooting/restarting isn't typical. Did you make sure you had enough battery before trying to root?
FIREFIREFIRE loads in a temporary fastboot and with the version you are using it lasts for about ten seconds (before the green light goes dim). You can issue fastboot commands during this time without the need of a factory cable.
See if you can get...
fastboot devices
...to be recognized during this time.
Sent from my Amazon Kindle Fire using xda premium
If you get stuck at a screen with a yellow triangle, run: fastboot -i 0x1949 oem idme bootmode 4000 If your device is always booting TWRP run: adb shell "idme bootmode 4000" If you still can't get out of booting TWRP, first run: adb shell "idme bootmode 4002" reboot your device, then run: adb shell "idme bootmode 4000" reboot again and you should be out of your bootloop.
Sent from my LG-VM670 using Tapatalk
It would be helpful to know which step in the rooting process things went awry.
Click to expand...
Click to collapse
OK, let's start with that.
From the thread I linked in the first post:
Your device will now boot into twrp recovery, and flash the firefirefire bootlaoder. When done it will prompt you to reboot. Upon reboot you will get stuck on the "yellow triangle" screen of firefire fire.
Click to expand...
Click to collapse
That was not my experience. My device loaded TWRP but just sat there on its home screen without prompting me to reboot. I used adb reboot recovery to see if it had indeed flashed FFF but was simply not prompting me to reboot, and it had not. So I used instructions from elsewhere (http://forum.xda-developers.com/showthread.php?t=1369405) to flash FFF at this point myself:
Howto flash by hand
Get into fastboot mode somehow. Having and older FFF from the TWRP installer is a good start. Currently KFU or fbmode is the easiest
flash with "fastboot -i 0x1949 flash bootloader u-boot.bin" (take out "-i 0x1949" if FFF is already installed)
disable fastboot: "fastboot -i 0x1949 oem idme bootmode 4000"
reboot: "fastboot -i 0x1949 reboot"
Click to expand...
Click to collapse
There were a couple of weird issues with this but the process seemed to go smoothly. However, when I rebooted (the last command) is when I discovered I was stuck in a recovery loop, and the last time I was able to see the device normally via adb devices/lsusb/dmesg.
I guess it may have been the battery because I've since let it fully charge (this is the first time I've looked at it in days) and now it's not in a recovery loop but stably sitting at the "yellow triangle". There is also now an entry for it in lsusb:
Code:
Bus 002 Device 008: ID 18d1:0100 Google Inc.
fastboot devices gives me something like "no permissions fastboot" but I have no idea what that means because I've never seen its normal output.
EDIT: I should note that I do notice the device ID now seems to register as 0x18d1 rather than 0x1949, but I'm not entirely sure what to do about that. I copied my udev rules but changed '1949' to '18d1' and 'Lab126' to 'Google Inc' but I don't even know if that was a sensible move because I've never really done much with udev rules.
pbailey212 said:
If you get stuck at a screen with a yellow triangle, run: fastboot -i 0x1949 oem idme bootmode 4000 If your device is always booting TWRP run: adb shell "idme bootmode 4000" If you still can't get out of booting TWRP, first run: adb shell "idme bootmode 4002" reboot your device, then run: adb shell "idme bootmode 4000" reboot again and you should be out of your bootloop.
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
I think the problem here is the he can't get past the bootloader and stuck in an ACTUAL bootloop. In which case, adb commands are useless.
One thing that could be causing problems is the USB cable being used. If the device only experiences these symptoms when plugged in then I would say that's most likely the case.
Sent from my Amazon Kindle Fire using xda premium
I suggest you build a firekit USB for Linux. Search for firekit for Linux thread in the development section.
Sent from my Amazon Kindle Fire using Tapatalk 2
palintropos said:
OK, let's start with that.
From the thread I linked in the first post:
That was not my experience. My device loaded TWRP but just sat there on its home screen without prompting me to reboot. I used adb reboot recovery to see if it had indeed flashed FFF but was simply not prompting me to reboot, and it had not. So I used instructions from elsewhere (http://forum.xda-developers.com/showthread.php?t=1369405) to flash FFF at this point myself:
There were a couple of weird issues with this but the process seemed to go smoothly. However, when I rebooted (the last command) is when I discovered I was stuck in a recovery loop, and the last time I was able to see the device normally via adb devices/lsusb/dmesg.
I guess it may have been the battery because I've since let it fully charge (this is the first time I've looked at it in days) and now it's not in a recovery loop but stably sitting at the "yellow triangle". There is also now an entry for it in lsusb:
Code:
Bus 002 Device 008: ID 18d1:0100 Google Inc.
fastboot devices gives me something like "no permissions fastboot" but I have no idea what that means because I've never seen its normal output.
EDIT: I should note that I do notice the device ID now seems to register as 0x18d1 rather than 0x1949, but I'm not entirely sure what to do about that. I copied my udev rules but changed '1949' to '18d1' and 'Lab126' to 'Google Inc' but I don't even know if that was a sensible move because I've never really done much with udev rules.
Click to expand...
Click to collapse
Make sure your linux environment is set up correctly.
http://forum.xda-developers.com/showthread.php?t=1475740
Installing TWRP 2.0.0 is different than installing TWRP 2.1.0. I think the instructions on the TWRP site is for the old version, but they link the new one.
http://forum.xda-developers.com/showpost.php?p=24732291&postcount=1298
Your OP sounds suspiciously like a dead battery, but you say you've corrected that. You might want to connect to your OEM charger for a while anyway and see if that helps
Also, in my experience, fastboot on linux required elevated privileges. Try running it as root.
Make sure your linux environment is set up correctly.
http://forum.xda-developers.com/show....php?t=1475740
Click to expand...
Click to collapse
I've done the Arch Linux equivalents of all of that, and I'm set up with udev rules per our wiki here: https://wiki.archlinux.org/index.php/Android#Adding_udev_Rules
I'm pretty sure the USB cable I'm using might actually be the issue because it was fine straight off the OEM charger, and I even momentarily got a correct reading with fastboot devices (as root), but now I'm back to almost like earlier. The yellow triangle screen is still "stuck"/stable, but I can't find it on adb/fastboot devices or lsusb.
palintropos said:
EDIT: I should note that I do notice the device ID now seems to register as 0x18d1 rather than 0x1949, but I'm not entirely sure what to do about that. I copied my udev rules but changed '1949' to '18d1' and 'Lab126' to 'Google Inc' but I don't even know if that was a sensible move because I've never really done much with udev rules.
Click to expand...
Click to collapse
This is fine. It just indicates you are running the FFF bootloader... pokey9000 changed the VID to a value fastboot recognizes by default instead of the custom vendor ID (1949) that Amazon uses in the stock bootloader. With the FFF bootloader, you can drop the "-i 0x1949" part of the fastboot command.
---------- Post added at 12:30 PM ---------- Previous post was at 12:27 PM ----------
palintropos said:
I've done the Arch Linux equivalents of all of that, and I'm set up with udev rules per our wiki here: https://wiki.archlinux.org/index.php/Android#Adding_udev_Rules
I'm pretty sure the USB cable I'm using might actually be the issue because it was fine straight off the OEM charger, and I even momentarily got a correct reading with fastboot devices (as root), but now I'm back to almost like earlier. The yellow triangle screen is still "stuck"/stable, but I can't find it on adb/fastboot devices or lsusb.
Click to expand...
Click to collapse
Have you tried setting the bootmode to normal and rebooting?
fastboot oem idme bootmode 4000
fastboot reboot
Like I said before, it would probably be best for you to try this as root.
EDIT: It's also possible your system is broken and the KF can't complete its boot process. When you start up the device, the boot logo will first come up. Does the display go black after that and come back with a dimmer yellow triangle logo? Because if it's doing that, it's not in fastboot any more.
kinfauns said:
This is fine. It just indicates you are running the FFF bootloader... pokey9000 changed the VID to a value fastboot recognizes by default instead of the custom vendor ID (1949) that Amazon uses in the stock bootloader. With the FFF bootloader, you can drop the "-i 0x1949" part of the fastboot command.
Click to expand...
Click to collapse
Ditto. If you can get the device to be recognized even for a second, it's still enough time to issue...
fastboot -i 0x1949 oem idme bootmode 4000
Just keep trying
[Edit:] or what he said
Sent from my Amazon Kindle Fire using xda premium
Yay! I played around and got my udev rules working, and I got a reading on (sudo) fastboot devices, so I was finally able to set the bootmode to 4000 and reboot. Everything seems to be back to normal now. The Kindle appears to be working fine though not rooted.
Please let me know:
if there is anything else I should know to make sure the KF is normal
if there is any additional info I should post to benefit other users who might have this same problem
or if I should mark this thread SOLVED/RESOLVED or equivalent and how to do so.
if your fastboot ever stucks in waiting for device mode and you are on linux
try once with either root user or using sudo command.
thats one of the thing people forget most of the time and get stuck there.
http://forum.xda-developers.com/showthread.php?t=1576675
Try the above with the kindle switched off you should see waiting for devic, then press power once ( fast boot should kick in when you power on)
Sent from my Amazon Kindle Fire using xda premium