Related
Hi!
I have a huge problem, with my tytn HTC
I have a wireles network at home. It is built like this:
Cable modem --> (not wireless)Router--> computer (conected to the router via UTP cable, that means with ordinary network adapter card).
In this computer, i have WIRELESS USB card, configured as Access point (AP), so the wireless networks works just fine. With my laptop i can connect to internet through this card with no problem at all...
But, when i try to connect to internet with my TyTN, it just won't work... it finds wireless network, it sais it is available, but when i try to connect, nothing happens. it sais "connecting" and than- nothing happens... after several tries, it sais that my wireless network is unavailable... when i reset my Tynt, it sais it is available again, but the same story again...after several attempts to connect to wireless network, it sais unavailable and that's it...
What is wrong? i tried everything, im quite desspered here...
Well, tnx in advance for any suggestions and advices...
I appologise for my bad english, too...
TNX!
Do you have any restrictions in your Acess point configuration? If yo have, just remove it or reconfigure for acess with your TyTN. Try to remove WEP or MAC filtering or firewall...
Resolving your wireless problems ...
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
i removed restrictions and firewall and still nothing...
Next thing, my wireless Access Point is set to 54g Auto.
On my Tynt i have installed Windows mobile 6 profesional, CE OS 5.2.1437 (build 17944.0.3.1)
I don't know exactly where should i look if my HTC is wireless is B or G...
I tried to change settings on my AP from 54g Auto to 802.11B and to to 802.11G and vice versa, but still nothing...
As i wrote before, i don't have wireless router i just have an ordinary router and then wireless USB card in one of the computers, so i can connect with my laptop to internet over this card. With laptop it works excelent.
So, can anyone suggest what kind of OS should i install on my HTC in order to fix this, and where can i get one?
TNX for so far, and TNX in advance for any further information or suggestion!
Still having problems...i tried everything...
i tried to connect to wireless network at friend's wireless router...TyNT found a signal, everything was just fine, then asked me for key (friend has WEP protection), i typed the password, and then i couldn't connect again...
I havo no clue whatsoever anymore...
Anyone with same problem?? Any suggestions?
Tnx in advance for any advice...
hmm...
I guess it is a hardware problem with my tynt's WI-FI...i can't think of anything else... i tried everything, still can not connect...
Im getting quite desspered with this HTC... i guess i'll sell it and buy NOKIA N95 or something like that...
well, if someone by any chance know where the problem is, i thanks in advance for every advice or suggestion
TNX
tytn wireless
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
wifi
same problem here ...
I have tried to flash older radio didn't help ...
I have tried disable wep on my router ... didn't help
I'm just in a loop of AVAILABLE-->CONNECTING-->AVAILABLE etc.
please if someone finds a solution (patch) for this problem post it to this thread.
still there?
lithocan said:
I have nothing to contribute as we have similar problems. I have learned from other users that development team from Htc is preparing a patch which will be released in two months time. Let's wait for it then.
Click to expand...
Click to collapse
Hi!
I'm just wondering are there any solutions been found?
Or it's definitely hardware problem?
WBR!
problem
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
pischk said:
There's actually several things you need to check.
First, on the Router side, insure that you are not restricting your wireless access. For instance, is your Router set to G Only or is it b/g?
Next, on your router side, make sure your router is not hidden. If so, then you'll need to manually add the router via Configure Wireless Networks on your TyTN. At the top is "Add New...". Choose this and insert your settings for your wireless router.
On the TyTN (HTC Hermes) side of things, you need to see if you are set to be B only or if you've upgraded (I think most ROMs on this site have this fix installed) and your device is seen as a G device and therefore can connect to G only devices.
These should hopefully resolve your issues.
Click to expand...
Click to collapse
Recently bought my wife one of these devices and just spent two whole days looking for a solution and that was it.. mixed mode - I had mine set to "G" only! Sometimes the solution is too simple for the geek to be able to spot I guess - maybe the wife would have found it faster!
Thanks for the solution.. as with all forums I always suggest a FAQ with these solutions or links to the threads/posts with these tips and resolutions.
kralcak said:
so Ive found my problem ....
Ive upgraded firmware in my router to newest version and problem appeared.
When I've removed encryption wpa2 and set my router to no encryption my wifi worked again.
So I've bought different wifi router and I've no problems now.
So anyone who is having dead wifi in hermes try to deactivate wifi encryption and try a different router (friends house or public wifi hotspot)
Click to expand...
Click to collapse
Lucky... Mine did not connect anymore, flashed black majik over schaps3.6 and voilla! worked again... without touching the router.... Will try last schaps tonight.... I´m tired of flashing and reinstalling....
Why is WMWiFiRouter always on and everybody can always connect even when I'm not running the software? It seems like the only way to stop it is to turn off the WiFi on my phone. Is there a way I can get it to run only when I want too? Is there a limitation on how many people can connect to it? Thanks for your help and time!
Apota said:
Why is WMWiFiRouter always on and everybody can always connect even when I'm not running the software? It seems like the only way to stop it is to turn off the WiFi on my phone. Is there a way I can get it to run only when I want too? Is there a limitation on how many people can connect to it?
Click to expand...
Click to collapse
From what I've seen, WMWifiRouter uses a peer-to-peer wireless network that it uses to essentially "forward" packets to the cellular network. The thing is, shutting down WMWifiRouter doesn't shut down the peer-to-peer wireless network, so it still broadcasts that the network exists. It won't actually do anything with that network (i.e. there's no cellular network access via it), but it maintains it. So, you can either shutdown wifi, as you've noticed, or you can have your phone connect to a different wifi network. Either works.
As for the last question, I don't know if there's much of a limitation, but I would imagine that it's probably dependent upon the limitations of your hardware or Windows Mobile. Theoretically, depending upon the subnet, it probably supports up to 253 users (x.x.x.2 - x.x.x.254), but it would probably choke and die from performance reasons before that.
Well, this brings up some other issues then. I thought that it would only broadcast a few feet because I assumed the power my cell phone puts out is very weak. This isn't the case. I tested it by walking down the street and I could stilll connect up to 6 houses down the street. That means that anybody within 200-300 feet can connect to the internet through my cell phone since it's unsecured. This worries me, especually since unlimited people can connect to it. If I'm in a public place or a hotel, etc. where I could be using it, so can tons of other people. This can be a real big problem. Is there a solution to this?
Another thing is that even though you aren't running the WMWiFiRouter software and if you have your WiFi turned on people can still connect to your phone. Thanks!
Sogarth said:
From what I've seen, WMWifiRouter uses a peer-to-peer wireless network that it uses to essentially "forward" packets to the cellular network. The thing is, shutting down WMWifiRouter doesn't shut down the peer-to-peer wireless network, so it still broadcasts that the network exists. It won't actually do anything with that network (i.e. there's no cellular network access via it), but it maintains it. So, you can either shutdown wifi, as you've noticed, or you can have your phone connect to a different wifi network. Either works.
As for the last question, I don't know if there's much of a limitation, but I would imagine that it's probably dependent upon the limitations of your hardware or Windows Mobile. Theoretically, depending upon the subnet, it probably supports up to 253 users (x.x.x.2 - x.x.x.254), but it would probably choke and die from performance reasons before that.
Click to expand...
Click to collapse
I have version .85, is there a later version and if so how do I get it? Is there a way to setup security on it or via the NIC driver? Thanks.
I just moved into this new place, just got the Cox Cable internet installed yesterday, picked up a new "Belkin N Wireless Router" model # F5D8233-4. Works fine with the laptop- I've had it setup using unsecured, WEP, & WPA/WPA2 Personal. No problems on the laptop. Inexpensive Dell Inspiron with Vista Home Basic.
However, the Wing will not cooperate at all. It only wants to connect to unsecured networks. It will connect to mine and others it detects in the appt complex. But as soon as any type of security is enabled it just tries to connect for a few seconds, then the network becomes unavailable. I'm soo tired of clicking around in the Wing with this stylus, I'm about to throw it out the window.
I've set up a static IP on the laptop so to better work with port forwarding & Azureus. Will this have an effect on what I'm trying to do? I can't see how it would, but I'm no expert.....
So here's what I've done. In the routers setup page, I've selected 64bit wep, typed in a passkey and hit generate. Wrote down the 4 keys it generated, saved the changes and exited the router setup. I think where I'm messing up is what I should be doing next with the Wing. Can anyone walk me through this?
About the only thing of note that I've done to the Wing as far as tweaking is concerned is to install Home Screen/Battery Status, overclocked to 260, and tweaked the registry to allow ring tones from the sd card.
HELP!!
maybe your wing uses the same ports as the ones you've forwarded to connect to your router. You should always make it really obscure (something like 65530-65534) to make sure that there are no conflicts between other apps and any port related protections your ISP may have implemented.
You are setting up your wing with the key, right? It might just be that the wing is incompatible with 64bit wep.
Let me clarify- the port forwarding was set up for the Azureus bit torrent client. Way obscure ports-in the 49,xxx-50,xxx range.
Yeah, setting up the wing with the key. The only choices are 64 and 128bit wep. And the WPA/PSK. Neither work. When the little window pops up asking for the net work key, I enter one of the ones I wrote down. The thing doesn't seem to be compatible with any type of security. Which kinda sucks....To use the wi-fi at home, I have to leave my router open to "signal thieves".
thats funny, actually.
I have my linksys wrt54g set to 64 bit 10 hex security and it works just fine. Maybe your problem has something to do with the wireless n part of your router? The wing is not compatible with draft-n. Does your router also broadcast with wireless-g or b?
It does...I just switched it over. Waiting for the Wing to reboot then I'll try again. Good thinking.
Ok, that didn't work either. The selections in the router are
1- Off
2- 802.11g,
3- 802.11g, 802.11b, 802.11n
4- 802.11n
It was on #3, I changed to #2 and no luck. Grrr...
Have a look on your wireless lan power settings, my Wing also had huge wifi problems all fixed when I changed the power to better performance.
I think I found a thread that mentioned that while researching this problem. Anyways, I've already made that change.
Which network adapter is the wi-fi one? Is it this- "SDIO WLAN Wireless Adapter"?
oh by the way just remembered something from my noob years.
make sure that your wing's adapter connects to "the internet" not "work"
fzzyrn said:
oh by the way just remembered something from my noob years.
make sure that your wing's adapter connects to "the internet" not "work"
Click to expand...
Click to collapse
lol, Already made sure of that. Thanks tho.
I've had the exact same issue with my MDA and originally with my Wing. It works fine now, I'm not sure why.
I just flashed to Open Touch 6.5. Still a no-go.
ok am new with this i got the tmobile wing and with the wifi i can use the internet right so that means that if i don't have a data plan i can still use the internet without getting charge for data can someone explained to me the wifi issued thanks i don't want to use the internet and later get a big bill cause i don't have data plan on my phone thanks...
so what's the wifi on the wing for???
ghostnj said:
ok am new with this i got the tmobile wing and with the wifi i can use the internet right so that means that if i don't have a data plan i can still use the internet without getting charge for data can someone explained to me the wifi issued thanks i don't want to use the internet and later get a big bill cause i don't have data plan on my phone thanks...
so what's the wifi on the wing for???
Click to expand...
Click to collapse
The wifi is just like a laptop's wifi, it connects to a wireless router and since it's not going through the cell phone towers, it will not charge you.
ivanmmj said:
The wifi is just like a laptop's wifi, it connects to a wireless router and since it's not going through the cell phone towers, it will not charge you.
Click to expand...
Click to collapse
ok thank you very much
OMG....I'm getting soooooooooooooo tired of dickin around with this thing. Now it won't connect to any network, secured or not.
I tried importing a certificate from IE on my laptop, because I got an error message on the wing saying the net work needed a personal certificate to identify me. Didn't work.
I tried a hard rest. Didn't work.
I've tried about 56,345 soft resets. Didn't work.
If there were any trees in the state of Kansas, I'd go bang my head on one of them. :
KidJethro said:
OMG....I'm getting soooooooooooooo tired of dickin around with this thing. Now it won't connect to any network, secured or not.
I tried importing a certificate from IE on my laptop, because I got an error message on the wing saying the net work needed a personal certificate to identify me. Didn't work.
I tried a hard rest. Didn't work.
I've tried about 56,345 soft resets. Didn't work.
If there were any trees in the state of Kansas, I'd go bang my head on one of them. :
Click to expand...
Click to collapse
It works fine with my current ROM. (JustMe by... Me. lol)
I'm pretty sure it's not a ROM issue...I just flashed this thing late last night. It started not connecting to anything late afternoon yesterday, while the stock T-Mobile ROM was installed.
The stock ROM never worked properly for me...
Try another ROM.
hi, i have a linksys wrt110 router and my phone can never connect, it says unavailable. any ideas?
ericm115 said:
hi, i have a linksys wrt110 router and my phone can never connect, it says unavailable. any ideas?
Click to expand...
Click to collapse
try another access point.
However, I have two of the same titans as you, and the same router.
one connects, the other does not.
I have asked many times on this site for help, but no response. the only difference is that the one that fails has updated roms.
it does not appear to be hardware, switch or other physical problems. I have tried several roms, and even flashing back to original. No go.
Wifi is all I can think about now, and if it was not for the service providers stupid data requirements, I would get a new smart phone.
I have a Mogul with Ryan Moguls Cricket lite 3.1/ radio 3.42.40 and I have the same basic problem. Only occasionally will my Wifi connect or detect my Access point (about 15 feet away). turning WLAN on/off doesnt seem to help. I have used other 6800's in the same environment with wifi working perfectly, so maybe it's a hardware problem. (although I have two 6800's right now with similar symptoms).
Any suggestions on how to check wifi antenna?
Hi Folks,
I have been postponing this post but nothing ive seemed to do has worked. I THINK after i rooted my issues started. I am unable to browse the net or anything when connected to my wifi. I have reset the router, forgotten and rejoined the network with no avail. All my other devices do not have this issue. Im not really sure what else to say so maybe some of you gurus could pick my brain. Though this is a wifi only issue and on this network. When connected to other networks im fine. My setup is as follows. I have a hard line going from the router the ISP provided in the other end of the house to the router in my room. Like i said my phone is the only device that has issues on this network.
thanks in advance.
Dbrock1980 said:
Hi Folks,
I have been postponing this post but nothing ive seemed to do has worked. I THINK after i rooted my issues started. I am unable to browse the net or anything when connected to my wifi. I have reset the router, forgotten and rejoined the network with no avail. All my other devices do not have this issue. Im not really sure what else to say so maybe some of you gurus could pick my brain. Though this is a wifi only issue and on this network. When connected to other networks im fine. My setup is as follows. I have a hard line going from the router the ISP provided in the other end of the house to the router in my room. Like i said my phone is the only device that has issues on this network.
thanks in advance.
Click to expand...
Click to collapse
That's a pretty strange issue, not sure there is going to be much help... I've had some strange, random issues with my S5. I had issues with wireless, xposed and some other apps after rooting the first time. I got tired of it and used Odin to reflash the stock firmware, then performed a factory reset and rooted afterwords. I haven't had any problems at all after doing this... In all honesty, that's the route I would go if I were you. Sorry I couldn't be more helpful, hope you get sorted out
BadKarma81 said:
That's a pretty strange issue, not sure there is going to be much help... I've had some strange, random issues with my S5. I had issues with wireless, xposed and some other apps after rooting the first time. I got tired of it and used Odin to reflash the stock firmware, then performed a factory reset and rooted afterwords. I haven't had any problems at all after doing this... In all honesty, that's the route I would go if I were you. Sorry I couldn't be more helpful, hope you get sorted out
Click to expand...
Click to collapse
Just wanted to agree with BadKarma on this. I've not had your exact issue, but I have had some similar stuff after rooting originally. I used Odin to go back to stock and rooted again and have been no issues since. Hope it works out. . .
jpk17 said:
Just wanted to agree with BadKarma on this. I've not had your exact issue, but I have had some similar stuff after rooting originally. I used Odin to go back to stock and rooted again and have been no issues since. Hope it works out. . .
Click to expand...
Click to collapse
well i used odin and got back but it turns out it seems to be the router? im on stock with no root and still cant access the net or anything else when im connected to the router. any thoughts on this?
Can you reset the settings in the router via your pc?
Try connecting standing right next to the router. I had this issue with my Note 2 and it ended up being a physical issue with the wireless chip or antennas. It's actually the reason I'm not on a S5.
Not that u want to hear this, but I had to replace my router for the same reason. My router would only pick up certain devices, had to do with hardware and firewall security settings.
Sent from my SM-G900V using XDA Free mobile app
Ok so i changed to security in my router to aes and tkip and i was able to connect and browse the net and so forth. but i just got home and connected and wasnt able to get access to the net again. i tried forgetting network and re-entering it with no luck.
Dbrock1980 said:
Ok so i changed to security in my router to aes and tkip and i was able to connect and browse the net and so forth. but i just got home and connected and wasnt able to get access to the net again. i tried forgetting network and re-entering it with no luck.
Click to expand...
Click to collapse
First and foremost you have to isolate the issue to either ur phone or the router. In order to do that its very simple.... can you connect to wifi outside of your house like starbucks or friends wfii? If the answer is yes than the issue lies solely with your router. Let me know what you find out and I can help guide you <---- systems administrator Also please provide the make and model of your router as well as your modem and your ISP.
EDIT: I just read the line where you talk about having another router in your room. I can already tell you this is probably NOT an issue with your phone but rather your setup. The secondary router must be setup as a repeater or bridge OR on a different subnet. This gets very tricky for average home user and I do not recommend you tackle it on your own. Also your main router has to be able to play nice with the secondary and if it's one provided by your ISP it's probably a POS. Also your phone is probably not the only device having issues with this setup.... its the only one you are noticing having issues. Android OS is very sensitive to weird wifi setups and anything out of the norm will set it off. It's actually a great tool in diagnosing wifi issues.
armeN0317 said:
First and foremost you have to isolate the issue to either ur phone or the router. In order to do that its very simple.... can you connect to wifi outside of your house like starbucks or friends wfii? If the answer is yes than the issue lies solely with your router. Let me know what you find out and I can help guide you <---- systems administrator Also please provide the make and model of your router as well as your modem and your ISP.
EDIT: I just read the line where you talk about having another router in your room. I can already tell you this is probably NOT an issue with your phone but rather your setup. The secondary router must be setup as a repeater or bridge OR on a different subnet. This gets very tricky for average home user and I do not recommend you tackle it on your own. Also your main router has to be able to play nice with the secondary and if it's one provided by your ISP it's probably a POS. Also your phone is probably not the only device having issues with this setup.... its the only one you are noticing having issues. Android OS is very sensitive to weird wifi setups and anything out of the norm will set it off. It's actually a great tool in diagnosing wifi issues.
Click to expand...
Click to collapse
Hi there thanks for the reply. Yes i can connect to any other router without issue. The router is my Router Info:
Name N300 Wireless Router
Model F9K1002v5 (01B)
Firmware 5.00.15(Nov 1 2013)
Serial No. 12349GC2508237
Boot Loader 0.12
I use my tablet and other pcs within this wifi. It is under a different subnet as well. (i think so been a while since ive done any networking) The main router that comes in has the standard IP 192.168.1.1 and the IP for my router in my room (basically set up like this since my room is quite far and gets bad signal from the main router, Cable in -> Main Router -> Hardwire hooked into a port -> ethernet run to my room -> Connected to a port on the wireless router) 192.168.2.1. My ISP is Optimumn Online. My wifi was working fine until about 10 mins ago. seems to happen so often. I did change the security a while back to TKIP + AES on the router and made sure it was the same on the phone and it was working fine for days until like i said about 10 mins ago.
Broadley1 said:
Not that u want to hear this, but I had to replace my router for the same reason. My router would only pick up certain devices, had to do with hardware and firewall security settings.
Sent from my SM-G900V using XDA Free mobile app
Click to expand...
Click to collapse
This leads me to think that perhaps the router (however old or new) may have a setting, or an actual limit, on how many devices connect to it.
If not that, perhaps if you rooted, and tried removing bloat, you may have been a bit overzealous and removed something related to WiFi and are now having this issue as a result.
I have only removed the list of apps and bloat that have been posted on Ricks Rom HERE. The ONLY problem I have seen since removing this list, was that I can no longer access PhotoVault correctly. Gives me an error saying that it has no connection to the database, but my 4G is working fine at the time as I was downloading via steam and streaming a movie, and playing a PC game at the same time...
Dbrock1980 said:
Hi there thanks for the reply. Yes i can connect to any other router without issue. The router is my Router Info:
Name N300 Wireless Router
Model F9K1002v5 (01B)
Firmware 5.00.15(Nov 1 2013)
Serial No. 12349GC2508237
Boot Loader 0.12
I use my tablet and other pcs within this wifi. It is under a different subnet as well. (i think so been a while since ive done any networking) The main router that comes in has the standard IP 192.168.1.1 and the IP for my router in my room (basically set up like this since my room is quite far and gets bad signal from the main router, Cable in -> Main Router -> Hardwire hooked into a port -> ethernet run to my room -> Connected to a port on the wireless router) 192.168.2.1. My ISP is Optimumn Online. My wifi was working fine until about 10 mins ago. seems to happen so often. I did change the security a while back to TKIP + AES on the router and made sure it was the same on the phone and it was working fine for days until like i said about 10 mins ago.
Click to expand...
Click to collapse
You have the right setup with a different subnet. It's possible the main router is assigning the same IP address that your router has to another device. It would be best if you picked up another router that has repeater capabilities and set it up in repeater mode. Also reserve an IP address for your router from the main router to avoid IP conflicts.
Another possibility is simply the wifi on your router is deteriorating and it's time for a replacement. I recommend the Netgear Nighthawk R7000 if you don't mind spending the $$$. If your on a bit of a budget the Netgear N900 (WNDR4500v2) is the next best thing that supports repeater mode.
well its been still working intermediary. I have to unplug the router and plug it back in then i can browse the net on my phone. idk if id like to lay out that kind of money for a new router. there has to be something else thats causing it. i set the router to reboot everyday, also my phone. its odd though. sometimes it works sometimes it dosent.