So, just like my title, what are your best setting for the said app? I just can't seem to mix well a very good equalizer setting on it. I'm listening through my Skullcandy or the stock headset.
Any ideas?
Related
Is it possible to listen to mp3 or any type of audio output on the wizard without the use of headphones?
I would like to listen to audio content without using headphones of any kind.
Can i use the wizad builtin speakers? If so how?
thanks in advance
um, just play it? The sound output will automatically redirect to either headphones or speakers, if you don't have headphones plugged in
tried but no luck
I tried what you recommended but still cannot hear any sound, either from video or audio sources.
generaly such issues are operator based not phone based
Audio problem solved
In comm manager the ringer setting was on vibrate. Set it to ring and I was able to listen via internal speakers. Im feeling a bit stupid.
I've tried 2 apps and i have not been able to get them to work. I'm trying to get my music to play in my blue earpiece. I've tried Blue Audio and bluetunes and have not been able to get them to work... anyone else have any suggestions?
p.s
im not being cheap i have bluetooth headphones i just need a small earpiece to listen to music at work.
the quality is horrible from a BT headset or does that even matter...I have something on my computer that i'll post when I find it
The issue is not always because of the music player application.
Does your Bluetooth earpiece have A2DP support? If not, consider buying a new one that has, e.g., I listen through a Jabra BT8040 - no need to install any application to force an audio stream.
Forget it I think its one of the apps you tried
Mesquire said:
The issue is not always because of the music player application.
Does your Bluetooth earpiece have A2DP support? If not, consider buying a new one that has, e.g., I listen through a Jabra BT8040 - no need to install any application to force an audio stream.
Click to expand...
Click to collapse
Well im using Jawbone 2.
Im not too concerned about quality because Im not going to have it on that loud.
I guess I may have to purchase a new earpiece to get that.... blah
it also works on my Blue Ant Q1, sounds good too. I didn't have to add any other apps or software
mmafighter077 said:
Well im using Jawbone 2.
Im not too concerned about quality because Im not going to have it on that loud.
I guess I may have to purchase a new earpiece to get that.... blah
Click to expand...
Click to collapse
how i get mine to work is,i go to comm manager then set up bluetooth device,go to settings then advanced settings (additional setup options),then go to audio and enable play system sounds on a remote hands free device and it should work. hope that helps
Here is what you need to send stereo bluetooth to a mono bluetooth headset. I use it and it works great. You might have to play around with it for a bit to figure out how to work it. Just run the exe on your device and not on the computer. One exe sends the audio and one exe stops the audio.
bt audio
damn beat me to it james yes bt audio does work but i use a jawbone 2 & i route it through advanced bt settings in comm mgr i used to use it on my wing but iv graduated to my monster tp2
No need for BT app
On my TP2, there is an option in the BT settings to route system audio to the headset...this automatically plays my mp3's through my BT headset, mono or stereo. has worked well on any of the builds I have tried without needing to install any additional files or change any complex system settings.
tabecho said:
On my TP2, there is an option in the BT settings to route system audio to the headset...this automatically plays my mp3's through my BT headset, mono or stereo. has worked well on any of the builds I have tried without needing to install any additional files or change any complex system settings.
Click to expand...
Click to collapse
haven't noticed that option before I remember some users were asking how to get the incoming calls ringtone and system sounds to play in their earpiece instead of on the phone.
nice find!
Is there any way to convert a phones Bluetooth A2DP profile to a
"phone" profile. The head unit in my car doesnt support A2DP, just wondering if theres a way I can play music through a phone profile via bluetooth. I''m on a Captivate, but figured this was more of an Android general inquiry. Thanks!
Possibly, but it would sound absolutely awful. The data of the phone profile is so poor in quality and is mono too.
edit:200th post.
It's possible that using an app like Mono Bluetooth (some similar name, search the Market) could allow your phone to play music as mono with your car thinking it's a phone call. As stated above it will probably not sound very good.
I played with the EQ settings and the sound has no change. I tried running the youtube app with Bluetooth headphones and through the phone speakers. I also tried Spotify through Bluetooth headphones and through the phone speakers. Both there was no change in the sound.
As the title says everytime I setup my preferences in developer mode it reverts back after every song.... Is there any way to fix this?
dami00976 said:
As the title says everytime I setup my preferences in developer mode it reverts back after every song.... Is there any way to fix this?
Click to expand...
Click to collapse
A lot of that will depend if your headphones can support those bit rates. Its 50% on the headphones. Could you set those options on another phone with this headset? Also, did you stop the music while changing bit rate?
EDIT: I just tried it on my phone with some cheap bluetooth headphones. The3 settings dont stick but I also know that these are cheap headphones that will not support some of the advanced features.
EDIT2: When I use a better set of headphones, with Apt-X for example, I can change the settings and they stick.
Scott said:
A lot of that will depend if your headphones can support those bit rates. Its 50% on the headphones. Could you set those options on another phone with this headset? Also, did you stop the music while changing bit rate?
EDIT: I just tried it on my phone with some cheap bluetooth headphones. The3 settings dont stick but I also know that these are cheap headphones that will not support some of the advanced features.
EDIT2: When I use a better set of headphones, with Apt-X for example, I can change the settings and they stick.
Click to expand...
Click to collapse
Thanks for the reply will play with the settings and see
Nothing works
I have also run into this issue and reverted back to stock because of it plus other reasons.
You could solve this issue (errr work around it) by using Tasker and configuring Tasker to toggle the settings in Developer settings for you when a BT device is connected. I haven't done it, but I know it's possible as Tasker can do almost anything with Root access.
Good luck.
Probably... But I don't know how to use Tasker ?
I have the T-Mobile edition. I had the same issue with my BeatsX, which use AAC. Audio was pretty bad.
I didn't find a solution to the problem despite researching for days, but when I flashed the international OxygenOS the issue seemed to have fixed itself, and my dev options show the headphones using AAC like it should.
I don't know if this would fix your issue, but that's my story with the same prob. Setting for example the AptX codec with my BeatsX doesn't work because, iirc, the codec isn't support by the headphones themselves. So the setting gets reverted. Maybe your headphones only support that specific codec as well.