Database Users

Trying to root - problems [SOLVED]

Hey guys.
I've been attempting this all morning and so far I've had no luck. I have a VodafoneAU Legend which I updated to the official 2.2 yesterday. But now I want to try root.
I've been trying to follow the HBOOT 1.01 guide but there's a few problems. First, I cannot connect to the phone with adb unless it's in htc sync mode. No other mode will work. So when it's time to copy testimage.zip to the card I have to change from sync mode to disk mode, whereby adb loses it's connection. What do I do about this? Is it a driver problem (in Win7 here) or something else?
Thanks,
Dave.

Ok, the first problem were drivers.
Now I can't finish the second guide. When I try using clockwork to install the firmware.zip, the phone just boots to the red triangle. What do I have to do?
Dave.

So I pressed the up button/power combo at the red triangle and get the Android system recovery. Selecting "apply update.zip" says it can't verify. What do I do? Is this guide for my phone or do I need to follow something else?

I don't understand this guys. Anyone help? I'm thinking since this is a step to root the phone, I'm not actually rooted yet so I can't use the clockworkmod? Then what is the guide for? The guides at unlockr don't mention what firmware/hboot they work for so I'm not keen to try them yet.

Read the guide on fake flash. You need the recovery file named "update.zip" in the root of your sd to proceed..
Sent from my Legend using XDA App

whitetigerdk said:
Read the guide on fake flash. You need the recovery file named "update.zip" in the root of your sd to proceed..
Sent from my Legend using XDA App
Click to expand...
Click to collapse
But isn't that what Rom Manager does? Download the update.zip then run it? Man this is getting even harder to understand.
Edit: And this is left out of the HBOOT 1.01 guide because.....????? When I work this out I'll write a PROPPER guide, lol.

Just checked and update.zip is on the card.
So which part of the guide am I getting wrong?

Decided to reinstall phone with the official froyo release and am now ready to try this again. Is there anyone that will walk me through the process? I will write a complete guide if the "gotchas" are still there.

i feel for you ... hope you get it fixed... thats one of the reason i havent dared messing with the phone because i've seen a few post like yours where something didnt go quite as described... for whatever reason... and im sure the answer is out there but just not within the guide instructions... i guess there is no way to gather all gotchas because there are so many environment variables...
good luck
and please share your technique

Just saw gobczak's thread in the developer forum having similar troubles with Vodafone UK phone, getting the red triangle at reboot. I'll keep an eye on his thread and see how he goes with it.

Did you run the stage1 and stage2 bats while in recovery?

dezzadk said:
Did you run the stage1 and stage2 bats while in recovery?
Click to expand...
Click to collapse
No because the guide didn't say to.
The thing is it seems I'm only stuck on the part where the firmware.zip file has to be flashed. The guide says to use clockworkmod for this. But when I try installing the clockworkmod recovery it gives some file verification error. Isn't there ways to do this via the pc, either through those batch files, adb etc? Or will that fake-flash update.zip file work?

jabbado said:
No because the guide didn't say to.
Click to expand...
Click to collapse
As I just posted on the other forum, I think you need to skip that step in guide 2 and go straight onto guide 3 after you have flashed the LEGEIMG.zip, rebooted, and then removed LEGEIMG.zip from the SD card.

Guys I've got to the point of downgrading to 1.31. But when I run the first batch file it just hangs at the "Writing zip" part, with the htc logo on the screen. Is there any way to fix this?

Can someone please explain this part of the guide:
Phone will reboot and find LEGEIMG.zip on your sdcard, copy it into RAM and check it. If you get CID error at this point, then you don't have goldcard.
Click to expand...
Click to collapse
Ok, so I don't get an error. I get nothing. The phone just boots to the fastboot screen. If I press the power button it goes to the hboot screen and I can see the messages of loading LEGEIMG.zip. But the guide doesn't say to press anything.
So should I or shouldn't I press the power button? Also, if I try making the goldcard again, at which point in the guide do I start from again? The entire process or just copying LEGEIMG.zip to card then rebooting phone? I mean, will all the other things like flashing misc1-2.img still be there?

Guys I finally got this working.
The first problem was with the goldcards. For whatever reason formatting them with the win7 format tool just wouldn't work. I had to use the command-line format tool, setting the block size etc manually.
The second problem was the unnecessary steps in the guide. A few people helped me out with this (namely blackbart at the Aus Whirlpool forum), but basically in the second step you can stop after flashing the LEGEIMG.zip. The updating froyo part isn't needed - for my phone anyway.
Then when running the batch files in the third part, for whatever reason the first batch would keep hanging at 'writing zip...' and I needed to remove the battery to unfreeze the phone. flannigan, also from the Aus Whirlpool forums suggested to just go on to the second batch file. This worked!
So my Legend is now finally a true Legend
Anyway, thanks for the help everyone - couldn't have done this by myself.
Dave

Great news, I think we need a new guide focused on rooting for HBOOT 1.01 / Stock Froyo to clear up the inconsistencies in the existing one. It's a minefield for a noob (or a rite of passage!), a revised guide will certainly save a lot of time and frustration for those taking this road in the future.
Sent from my HTC Legend using XDA App

EpicSauce said:
Great news, I think we need a new guide focused on rooting for HBOOT 1.01 to clear up the inconsistencies in the existing one. It's a minefield for a noob (or a rite of passage!), a revised guide will certainly save a lot of time and frustration for those taking this road in the future.
Click to expand...
Click to collapse
I'll write one if ya's want. I wanted to include little tidbits like downloading the apps required (visionary, rom manager etc) from the market then backing them up to the card with Astro so if it goes all wrong and you have to start again, you can just install them all from the card Also on using adb to push the files (roms, img's etc) when the guides say "copy this blah blah". Much quicker than changing to disk mode and back. Sound good?

Sounds good! Happy to help and add my 20c worth along the way. The existing guide has got the meaty bits, a new guide would cull the stuff not relevant, help fill in the gaps and alert to the pitfalls we've fallen into.

jabbado said:
I'll write one if ya's want. I wanted to include little tidbits like downloading the apps required (visionary, rom manager etc) from the market then backing them up to the card with Astro so if it goes all wrong and you have to start again, you can just install them all from the card Also on using adb to push the files (roms, img's etc) when the guides say "copy this blah blah". Much quicker than changing to disk mode and back. Sound good?
Click to expand...
Click to collapse
I agree... i've done my reading since june of last year but then didnt check for another 4 months... and so many how to's pop up with various ways of doing it depeding on the situation... a lot of those howtos were consolidated howtos which sometimes make intermediate steps unenecessary (may be in some cases causes more head aches since it didnt take into considerations on newer version of hboots...etc)... an updated how to will be much appreciated...
And you're right the most important pre requirement is to have a safety net ... so starting with how to create a back up in case you screw it up is a must!
but im glad it worked out for you!

Phone will not install PC36IMG.zip file, tried a couple sd cards, stuck on boot loop

My friend gave me his Evo to try to fix. It isn't rooted so S-on. I tried put a recovery file on to see if I can change the rom, but it just won't recognize it. Someone else posted a similar problem, but he got is to work. I tested the card and file and my evo asked if I wanted to update, but his phone will not work. It is stuck in boot loop. Not sure how he got stock on that. He doesn't mess with phones. There was an unbrick program I tried and it didn't seem to work, but I probably wasn't using it correctly since it kept changing the rom to the same rom from what I could tell.
It boots up sometimes to seem to work for a minute then boots again. I get the red triangle when I try to go into recovery. It probably doesn't have a recovery img since we haven't tried to root it.

ask your friend what exactly was he doing prior to this happeing, also whats the info when you go into the bootloader? i only ask cause the more info you provide the better chances are someone can help solve this issue. also you cant put a recovery or a custom rom on till your rooted.

ok
dzee206 said:
ask your friend what exactly was he doing prior to this happeing, also whats the info when you go into the bootloader? i only ask cause the more info you provide the better chances are someone can help solve this issue. also you cant put a recovery or a custom rom on till your rooted.
Click to expand...
Click to collapse
I can hold the power and down vol and go into bootloader. It goes through the zip file loading instructions and can't find the PC36IMG image and never asks if I want to update. I think I read a post where someone was told their bootloader is "locked".

if your bootloader is S-on, then yes; your bootloader is locked and you can't flash any custom roms. what you might be able to do is download an RUU rom and flash from your computer.
Look at the bootloader version and tell us what that says..

ok
Hypeo said:
if your bootloader is S-on, then yes; your bootloader is locked and you can't flash any custom roms. what you might be able to do is download an RUU rom and flash from your computer.
Look at the bootloader version and tell us what that says..
Click to expand...
Click to collapse
I believe it was version .79 or something like that. I'll check it when I get home.
As soon as he gets back from China I'll ask him what he did when started bootlooping. The phone might work for 30 seconds before going into reboot over and over so RUU might not work. But I can go into bootloader and into fastboot and was able to get a unbrick program to run and it seemed to be able to install another rom, but the rom it said it was installing was the same that was on the phone so maybe they needs S-off to function.

If you find your phone is rooted and can turn it on long enough to download an app from the market called Flash Image GUI, in the description it will say for the EVO 3d but it works on the og as well, you can also download off the devs xda thread just google (flash image GUI xda) and it should pop up, another thing make the file is on the root of your sd card and not in a sub folder. Good luck.
Sent from my PC36100 using xda premium

Oh and you can't flash custom roms with s on period, if it is on that's your problem there.
Sent from my PC36100 using xda premium

here it is
Hypeo said:
if your bootloader is S-on, then yes; your bootloader is locked and you can't flash any custom roms. what you might be able to do is download an RUU rom and flash from your computer.
Look at the bootloader version and tell us what that says..
Click to expand...
Click to collapse
S-on
HBOOT-0.79.0000
MICROP-041f
RADIO-1.39.00.04.26
Apr 14 2010, 15:41:34
Does this give any idea of what I can do.

[Q] another noob with a rooting issue

sprint evo 4g, updated to the newest version before deciding to root. yes i now know that was my biggest mistake!
ok so i used this: themikmik dot com/showthread.php?11114-GUIDE-WIP-How-to-achieve-S-OFF-after-unlocking-2-18-HBOOT-with-HTCDev-com-No-More-Watermark
after using the HTCDEV to unlock.
basic info:
says unlocked at top of screen
hboot 2.18.0001
radio 2.15.00.12.19
s-on
version 2.3.5
kernel 2.6.35.10 g4b48446
software 4.67.651.3
pri2.33_003
prl 60683
hardware 0003
i am stuck in between step 10 and 11.
problem i am having is the pc36img.zip. i tried both that are listed and tried both from different computers to make sure it wasn't a pc issue. i get a message that says "no or wrong zip image" it never gives me the option to update in fastboot. and never goes to saying locked again as described in the tutorial.
i downloaded su, root checker,and busy box. root checker says the phone is rooted. i know i need to get the h boot to a lower level inorder to do the unrevoked3 program.
tried flashing the recovery and says "cant open /sdcard/pc36img.zip (bad)"
made sure it wasn't zip.zip and it was so i fixed that and still wouldn't work.
the only thing i am not sure of is step 10 and wether i did it right :Once the misc partition has been updated, you can downgrade your Bootloader and HBOOT to a non-watermarked version rootable with unrevoked.
does the partition auto update or do i need to do something to make it update? i didn't see any option for this. eveything up to this point went exacty liek it should have so now i am lost. i have searched numerous forums and found similar problems but none that were exactly the same. and none of the solutions worked for me. i tried all the basics rebooting, etc and nothing. any info would be greatly appriciated.
the only other thing that i may have done wrong that i can tell is what file i am trying to make the pc36img. at the bottom of post # 1 it has 2 attachments listed as pc36img files those are the ones i am trying to use. when i try to click the hyperlinks thru the rest of the post i get an error message from that site thats says " This account's public links are generating too much traffic and have been temporarily disabled! " so i dont know if that site has the same zip files or i am completely using the wrong zip file.
sorry for the long winded post i know the noob video says make it brief but i figured the more info the better.
thank you.

sprint evo 4g, updated to the newest version before deciding to root. yes i now know that was my biggest mistake!
Click to expand...
Click to collapse
Oh brother was it!
basic info:
says unlocked at top of screen
hboot 2.18.0001
radio 2.15.00.12.19
s-on
version 2.3.5
kernel 2.6.35.10 g4b48446
software 4.67.651.3
pri2.33_003
prl 60683
hardware 0003
Click to expand...
Click to collapse
Your S-On,so your not rooted.
problem i am having is the pc36img.zip. i tried both that are listed and tried both from different computers to make sure it wasn't a pc issue. i get a message that says "no or wrong zip image" it never gives me the option to update in fastboot. and never goes to saying locked again as described in the tutorial.
Click to expand...
Click to collapse
Make sure the PC36IMG is all in CAPS.
Sent from my Dell PC.

Diablo67 said:
Oh brother was it!
Your S-On,so your not rooted.
Make sure the PC36IMG is all in CAPS.
Sent from my Dell PC.
Click to expand...
Click to collapse
Actually s-on or s-off status doesn't determine if your rooted or not. That indicates wether your NAND unlocked or not. To be rooted is to have busybox and superuser permissions
Sent from my PC36100 using XDA App

when i check with root checker it says i am rooted and have su. maybe it just means unlocked? busy box also says rooted?
pc36img is in all caps.
thanks for the quick response!

evo4gnoob said:
Actually s-on or s-off status doesn't determine if your rooted or not. That indicates wether your NAND unlocked or not. To be rooted is to have busybox and superuser permissions
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
This. S-Off/S-On is basically root for bootloader only has no bearing on root of phone itself you can be s-on and still root your phone you just wont have or be able to have a custom recovery or flash unsigned zips thru bootloader so romming is almost impossible but root is completely possible

evo4gnoob said:
Actually s-on or s-off status doesn't determine if your rooted or not. That indicates wether your NAND unlocked or not. To be rooted is to have busybox and superuser permissions
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
This. S-Off/S-On is basically root for bootloader only has no bearing on root of phone itself you can be s-on and still root your phone you just wont have or be able to have a custom recovery or flash unsigned zips thru bootloader so romming is almost impossible but root is completely possible
Click to expand...
Click to collapse
Ok,thanks for clearing that up,serious dudes i hate giving the wrong info when trying to help someone and i don't mind admitting when i'm wrong,lol.Your never to smart or old to learn something new.
Sent from my Dell computer.

I can probably help here.
If all you want is to be rooted, then you are. There's no reason to do the rest, especially if you're out of warranty. Since you already have a custom recovery installed, you can feel free to flash a custom ROM, and not even worry about the rest of the process.
The Dropbox links thing should be fixed now. I had to move them all to 4shared.
As far as the misc partition flashing, as long as you didn't get any errors when in the command prompt/adb shell, then I'm sure it flashed successfully. The only way to tell is if the Froyo PC36IMG.zip flashes successfully without a "main version fail."
I can assure you the PC36IMG works, as I've used it many times myself. Did you confirm the md5? Is it possible your SD card got corrupted somehow? Those are the only reasons it wouldn't pick it up.

thanks for coming in here i really appriciate it.
i still pay for the extended warranty if thats what you are asking for my phone.
my hboot is still 2.18 and because of that i can not run the unrevoked software either.
as far as the pc36img, i am just not sure if i am changing the name on the correct file. in your first post you have 2 attachments, those are the ones i tried to use to rename, was i correct in doing that? if i go back to where you say to use the 3.70 Froyo ROM with 2.10 HBOOT - md5: 7056D42812AA5DF03FCC8DDDC2B64E85
it goes to a dead site, so thats what makes me think i did something wrong. no main version ail messages and the top of my fastboot screen still says unlocked, not locked and not missing.
thank you again for your help and imput
how do i confirm if the md5 number is correct?

98tib said:
thanks for coming in here i really appriciate it.
i still pay for the extended warranty if thats what you are asking for my phone.
my hboot is still 2.18 and because of that i can not run the unrevoked software either.
as far as the pc36img, i am just not sure if i am changing the name on the correct file. in your first post you have 2 attachments, those are the ones i tried to use to rename, was i correct in doing that? if i go back to where you say to use the 3.70 Froyo ROM with 2.10 HBOOT - md5: 7056D42812AA5DF03FCC8DDDC2B64E85
it goes to a dead site, so thats what makes me think i did something wrong. no main version ail messages and the top of my fastboot screen still says unlocked, not locked and not missing.
thank you again for your help and imput
how do i confirm if the md5 number is correct?
Click to expand...
Click to collapse
The two files attached to the first post are both recoveries. You only needed one of them, and I assume you were okay with that part. The link you speak of should be working now, and that file gets renamed the same way the recovery zip did. As far as checking the md5, you just need to find a program that will do that. I use HashTab.
Like I said before, the dead link has nothing to do with you; Dropbox just canned my account because of too many downloads. The link should now be pointing to 4shared if the md5 doesn't match and you need to redownload.
You don't necessarily need to worry about the watermark issue now; just wait until you need repairs, and then you can use that process to remove it. You'll probably know a lot more if/when that happens, and the process will be easy as pie .

Captain_Throwback said:
The two files attached to the first post are both recoveries. You only needed one of them, and I assume you were okay with that part. The link you speak of should be working now, and that file gets renamed the same way the recovery zip did. As far as checking the md5, you just need to find a program that will do that. I use HashTab.
Like I said before, the dead link has nothing to do with you; Dropbox just canned my account because of too many downloads. The link should now be pointing to 4shared if the md5 doesn't match and you need to redownload.
You don't necessarily need to worry about the watermark issue now; just wait until you need repairs, and then you can use that process to remove it. You'll probably know a lot more if/when that happens, and the process will be easy as pie .
Click to expand...
Click to collapse
i used only one and that was fine.
here is the link i am talking about, when i click on the hyperlink for pc36img.zip it still leads to drop box.and not a file i can download to drop/drag to the root of the sd card
PC36IMG.zip - 3.70 Froyo ROM with 2.10 HBOOT - md5: 7056D42812AA5DF03FCC8DDDC2B64E85
both attachments at the bottom of post # 1 start with pc36img, i am using one of them as the renamed file, i am sure if i am wrong in doing that at this point.
i understand about the water mark. thank you.

98tib said:
i used only one and that was fine.
here is the link i am talking about, when i click on the hyperlink for pc36img.zip it still leads to drop box.and not a file i can download to drop/drag to the root of the sd card
PC36IMG.zip - 3.70 Froyo ROM with 2.10 HBOOT - md5: 7056D42812AA5DF03FCC8DDDC2B64E85
both attachments at the bottom of post # 1 start with pc36img, i am using one of them as the renamed file, i am sure if i am wrong in doing that at this point.
i understand about the water mark. thank you.
Click to expand...
Click to collapse
Thanks, you were right, that link wasn't updated. It is now .
You can remove the renamed recovery PC36IMG from your card and replace it with the Froyo PC36IMG, if you're going to continue trying to flash and NAND unlock with unrevoked.

This is what's cool about this forum a noob asking a question and you get 4 big time contributors helping out!
Sent from my PC36100 using xda premium

Captain_Throwback said:
Thanks, you were right, that link wasn't updated. It is now .
You can remove the renamed recovery PC36IMG from your card and replace it with the Froyo PC36IMG, if you're going to continue trying to flash and NAND unlock with unrevoked.
Click to expand...
Click to collapse
thank you.
i downloaded the correct file, renamed, and moved to the sd card and i'm still having the same problem. never asks to update. still says unlocked and still can't run unrevoked.
i really do appriciate all your help and imput with solving my problem

98tib said:
thank you.
i downloaded the correct file, renamed, and moved to the sd card and i'm still having the same problem. never asks to update. still says unlocked and still can't run unrevoked.
i really do appriciate all your help and imput with solving my problem
Click to expand...
Click to collapse
What kind of sd card are you using? You might want to try a different card, or reformat the stock card, if that's what you're using. That's the only other reason it wouldn't pick up the file, provided it's named correctly. And I assume you verified the md5 and it's good? And you're certain the file is on the root of the sd card as well? I cant think of anything else that could be causing the problem. Let me make sure my bootloader reads the file just to make sure.
EDIT: Scratch everything I said above. If your phone still says "unlocked" at the top of the bootloader, the misc partition wasn't updated successfully. Did you already complete that part, with no errors? You need to reconnect the device while booted up, with USB Debugging enabled, and run those commands from the command prompt from the folder with adb in it. Make sure you have the files "flash_image" (extracted from zip file) and "mtd-eng.img" (extracted from zip file) on the root of your sd card. If you're using Windows 7, run Command Prompt as an administrator. Let me know the output of those commands before continuing. If you got any errors on that part, that would be why you can't flash the Froyo ROM.
I saw you mentioned that in your OP, but I guess I didn't realize you skipped that part. That'a really the most important part of the process. It's the part right before the sentence you mention about the misc partition being downgraded. That last command flashes the mtd-eng.img file to the misc partition.

both files are unziped and on the sd card, running windows vista. ran the cmd and it looked like just like it did in your post but now that i am thinking about it i dont remember the phone doing anything. i also have the zip file for both on the sd card, should i remove them? but then again it didn't give me any errors either.
using the stock sd card. sandisc 8gb class 4.
i will redo the cmd portion again when i get home, limited here at work.
i thank you again for your help.

98tib said:
both files are unziped and on the sd card, running windows vista. ran the cmd and it looked like just like it did in your post but now that i am thinking about it i dont remember the phone doing anything. i also have the zip file for both on the sd card, should i remove them? but then again it didn't give me any errors either.
using the stock sd card. sandisc 8gb class 4.
i will redo the cmd portion again when i get home, limited here at work.
i thank you again for your help.
Click to expand...
Click to collapse
It does sound like it worked okay. The phone isn't supposed to do anything. But there is a way to verify that it flashed successfully. And yes, you should delete the zip files for those off of the root of your sd, to be safe.
Before you re-run those commands, open a command prompt and navigate to the location of fastboot. Put your phone into fastboot mode, connect to the the computer, and run this command:
Code:
fastboot getvar mainver
and report back what it says. My guess will be it'll report "4.67.651.3". That means the main version hasn't been downgraded. Then, reboot the device and run the commands as listed in the guide to gain superuser access & flash the downgrade to the misc partition. Then reboot into the bootloader, and you'll know it worked if it now says "LOCKED (OOW)" at the top. If it doesn't, then I'm not really sure what to do next. But definitely do a screenshot of the command prompt commands and output, starting with "adb shell".

Captain_Throwback said:
It does sound like it worked okay. The phone isn't supposed to do anything. But there is a way to verify that it flashed successfully. And yes, you should delete the zip files for those off of the root of your sd, to be safe.
Before you re-run those commands, open a command prompt and navigate to the location of fastboot. Put your phone into fastboot mode, connect to the the computer, and run this command:
Code:
fastboot getvar mainver
and report back what it says. My guess will be it'll report "4.67.651.3". That means the main version hasn't been downgraded. Then, reboot the device and run the commands as listed in the guide to gain superuser access & flash the downgrade to the misc partition. Then reboot into the bootloader, and you'll know it worked if it now says "LOCKED (OOW)" at the top. If it doesn't, then I'm not really sure what to do next. But definitely do a screenshot of the command prompt commands and output, starting with "adb shell".
Click to expand...
Click to collapse
thank you, you are my savior! its always the dumb things that you think you did right that you did wrong! lol. thank you again!

now i'm off to screw something else up!

Serious Issues With Rooting

I have spent over a week trying to root my HTC Legend (running 2.2 froyo HBOOT 1.01).
Ive tried a dozen guides everywhere but I cant seem to get past the downgrade process :/
I tried this guide here (http://forum.xda-developers.com/showthread.php?t=894465) but i got "permission denied" when i tried to "adb reboot bootloader"
I get the cr--rw---- error when i try other guides.
Nothing seems to work.
Can anyone please write a simplified guide at one place for all this?
or tell me What really could be going wrong?

Use the "Hboot made easy guide" which is somewhere in this forum section. Very simple and I used the guide to root my legend after having fruitless tries with other guides.
Sent from my Legend using xda premium

The Legend just got added to the htc dev site so you should be able to unlock the bootloader now, might make things much easier for you.

Hi,
Did you find a solution ?
I'm in the same situation as you, my legend is froyo 2.2 and HBOOT 1.0.
If we use the htcdev, after that can we root the legend ?

makak06 said:
If we use the htcdev, after that can we root the legend ?
Click to expand...
Click to collapse
Yes, with "HTC Super tool v3"

first of all download an application called visionary+
http://content.modaco.net/dropzone/c...ryplus.r13.apk
make sure that the usb debugging is turned on.
i hope you know how to create a gold card and that you have done it.
put the gold card in the phone.
then instead of running the crackin.bat file open it in word pad.
then temp root the phone using visionary+
type in each command one by one in the command prompt.
then when you reach the step where they show "adb shell" followed by commands.
then type
adb shell
then you will get a '$' symbol
then type su
then you will get a '#' symbol
then continue typing the commands without the 'adb shell'
after you type 'reboot' ignore the 'wait_for_device'
once the phone is back on temp root it again before you proceed.
finish the procedure this way.
Remember that you will get many error messages while you type each command. ignore the messages.
You wont get the full crwxrwxrwx. But what you get will be good enough.
now you can run the RUU
please reply if you have any doubts.

just try Unlock Bootloader http://htcdev.com/

yup... agree to the guy above..
unlock your boot loader than, flash CWM, after that. flash what ever rom you want as long as its for legend roms... ^^

hi guys,
i unlocked my device via htcdev its hboot version is now 1.02.000 and i flashed recovery_legend_5.0.2.8.img but i am not able to flash a new rom
after i booted in to recovery mode i chose flash zip from sd card option in the list it couldn't pass to next screen, options listed in the main menu goes off and i can see only cwm icon (a black hat over a yellow circle) i waited 2-3 minutes but nothing happened when i press power button it returns to main menu again.
Also other options listed in the cwm main menu not goes further, reboot system and power off, wipe data... either, same thing happens as described above.
i am waiting your suggestions

inside the cwm menu you have to make a selection by hitting the trackball (when you press the power-button, only the image you've descriped will appear)

mph_aut said:
inside the cwm menu you have to make a selection by hitting the trackball (when you press the power-button, only the image you've descriped will appear)
Click to expand...
Click to collapse
damn it!.. what a silly mistake
i left left my phone at the office tomorrow i should give a try

and tbather
thanks, i use trackball to select menu options and installed custom rom fuse 2

Try the rc4b. A very good rom.

Also try zeubea's ICS alpha, just for giggles.
(read the op's post in there before trying it, it is alpha rom at this stage, getting better all the time).

zivilist said:
just try Unlock Bootloader htcdev
Click to expand...
Click to collapse
Can I also get rid of the S-ON on my phone by using this ??

timonmulder said:
Can I also get rid of the S-ON on my phone by using this ??
Click to expand...
Click to collapse
Yes you can, but be warned you can't go back (voids warranty)
Sent from my Legend using xda premium

Nice hmm now I have to find a simple guide for turning S-on to S-off, because my phone is already rooted
Sent from my Legend using XDA

Damn, I'm trying to get Hboot 1.02 on my phone, but it said my ROM isn't supported (yet).

timonmulder said:
Damn, I'm trying to get Hboot 1.02 on my phone, but it said my ROM isn't supported (yet).
Click to expand...
Click to collapse
you can flash the bootloader with the method BlaY0 provided here, regardless which rom you're currently using

mph_aut said:
you can flash the bootloader with the method BlaY0 provided here, regardless which rom you're currently using
Click to expand...
Click to collapse
Yeah I tried that one, and I got stuck everytime at step 7. He finds my LEGEIMG.zip, but when he wants to install that one he keeps saying:
Main version is older!
Update Fail!
Do you want to reboot device?

MyTouch with frozen bootloader

I got my hands on a mytouch that I am trying to fix. I am not 100% on the original condition but I was told it was stock and never touched. The owner went to sleep and woke and the phone will now only boot into the boot loader screen. Says S-ON, HBoot 0.89.0006, radio 26.13.04.19_m. It is completely unresponsive and none of the buttons do anything. When I plug it in the pc notices it and the phone changes to fast boot usb. I have tried placing the pd15img thing on the sdcard and it doesn't really seem to notice it. Adb doesn't seem to detect it either. Any ideas?

i really am wondering how many people actually read my brick guide...

saranhai said:
i really am wondering how many people actually read my brick guide...
Click to expand...
Click to collapse
i read your guide. Did you miss the part in my first comment where i said I tried the pd15img file on the sdcard but that the phone doesn't seem to notice it.
"For S-On users:
Q: help! my phone is stuck on the Mytouch logo screen!
A: pull the battery, and see if you can get into the bootloader using volume down+power buttons
if you can get into the bootloader:
1) see if you can wipe data/do a factory reset in bootloader.
2) flash the stock Glacier PD15IMG.zip file choose from either
Android 2.2.1 OR Android 2.3.4
rename both files to PD15IMG.zip if not already.
-put both files in the ROOT of your SDcard, reboot into bootloader/hboot, and follow the onscreen instructions
note: if you are still unclear on what to do, read the "HOW TO RESTORE TO STOCK" section"
I PUT THE FILE ON THE CARD AND IT JUST SITS THERE TOTALLY UNRESPONSIVE. None of the buttons work and the only thing I can do is pull the battery out.
Now thanks for the "help", but do you have any real suggestions?

rage2wrath said:
i read your guide. Did you miss the part in my first comment where i said I tried the pd15img file on the sdcard but that the phone doesn't seem to notice it.
"For S-On users:
Q: help! my phone is stuck on the Mytouch logo screen!
A: pull the battery, and see if you can get into the bootloader using volume down+power buttons
if you can get into the bootloader:
1) see if you can wipe data/do a factory reset in bootloader.
2) flash the stock Glacier PD15IMG.zip file choose from either
Android 2.2.1 OR Android 2.3.4
rename both files to PD15IMG.zip if not already.
-put both files in the ROOT of your SDcard, reboot into bootloader/hboot, and follow the onscreen instructions
note: if you are still unclear on what to do, read the "HOW TO RESTORE TO STOCK" section"
I PUT THE FILE ON THE CARD AND IT JUST SITS THERE TOTALLY UNRESPONSIVE. None of the buttons work and the only thing I can do is pull the battery out.
Now thanks for the "help", but do you have any real suggestions?
Click to expand...
Click to collapse
Sounds like you have yourself a paperweight, OP.
Also, don't be rude to Saranhai, please. About 4.5 out of 5 of the "Help my phone is bricked" threads we get could have been prevented by the person reading his guide. No kidding.
If the volume up and down keys don't respond and the bootloader doesn't scan for the PD15IMG.zip file, then it sounds like your bootloader is corrupted or in some other way damaged. If the phone just decided to do this, literally, overnight it's probably a failed eMMC.
Anybody else want to chime in? I honestly hope I'm wrong.

Sorry op, it is most likely bricked, send it back to tmo or htc if you can. Also, estallings is right, please don't be rude to saranhai, he has helped a lot of people pull their phones from the brink.

Thanks for a real reply. I was afraid it was just dead but I thought someone might have a trick or 2.
I got nothing against Saranhai, but for some reason he was trying to be an ass to me. He could have said nothing but instead he implied I don't understand how use a forum or look through guides or research a problem before begging for help.
And his "awesome" unbricking guide not only has dead links to megaupload files its also written very unclear in certain points.
"2) flash the stock Glacier PD15IMG.zip file choose from either
Android 2.2.1 OR Android 2.3.4
rename both files to PD15IMG.zip if not already.
-put both files in the ROOT of your SDcard,"
What does that even mean? So do I get to choose, or do I have to download both? It doesn't really matter because one of the links is dead anyway.

rage2wrath said:
Thanks for a real reply. I was afraid it was just dead but I thought someone might have a trick or 2.
I got nothing against Saranhai, but for some reason he was trying to be an ass to me. He could have said nothing but instead he implied I don't understand how use a forum or look through guides or research a problem before begging for help.
And his "awesome" unbricking guide not only has dead links to megaupload files its also written very unclear in certain points.
"2) flash the stock Glacier PD15IMG.zip file choose from either
Android 2.2.1 OR Android 2.3.4
rename both files to PD15IMG.zip if not already.
-put both files in the ROOT of your SDcard,"
What does that even mean? So do I get to choose, or do I have to download both? It doesn't really matter because one of the links is dead anyway.
Click to expand...
Click to collapse
Place one on there at a time. At least with the name PD15IMG.zip. The name has to be very exact and the bootloader is suppose to scan for the file whenever it loads.
I would suggest the GB (2.3.4) file. Does that link work?

rage2wrath said:
Thanks for a real reply. I was afraid it was just dead but I thought someone might have a trick or 2.
I got nothing against Saranhai, but for some reason he was trying to be an ass to me. He could have said nothing but instead he implied I don't understand how use a forum or look through guides or research a problem before begging for help.
And his "awesome" unbricking guide not only has dead links to megaupload files its also written very unclear in certain points.
"2) flash the stock Glacier PD15IMG.zip file choose from either
Android 2.2.1 OR Android 2.3.4
rename both files to PD15IMG.zip if not already.
-put both files in the ROOT of your SDcard,"
What does that even mean? So do I get to choose, or do I have to download both? It doesn't really matter because one of the links is dead anyway.
Click to expand...
Click to collapse
Maybe I went off on you the wrong way, sorry about that. Its just that so many posts lately are from idiots who don't read anything at all..and they come here wining and crying. Maybe you could've posted that you read around next to
As for my guide: I will try to fix the links and make it more clear...
-Saranhai