Related
No need to install modaco R6 as it is not fully compatible with the latest vega firmware 1.8. Just follow these simple instructions and it will be working without any add-ons at all. CWM people will probably have to do it via the recovery.
Just download the attachment with the vega, go to settings, software tool, software update and point it to where you got the downloaded file. The vega will reboot and you will have a full working market. It will be the old version the first time you launch it but it will update itself. After that just install maps, youtube and everything else google. The only thing I'm having trouble installing is the official twitter app.
Hope that helps you guys at XDADEV
http://fileape.com/?act=download&id=bbxlSLJddQ5DnT4y&g=1
Thanks for this.
I have edited it and added the smalltaskbar, works great. Cheers
hi guys, i'm having issues trying to install market. i have tried this file and the one from o_g. with no luck. i can dl find and execute the file. when i comes to reboot i get the android out of the box symbol (which i'm assuming is bad ?)and have to power down the vega to get it to boot again, without market ? any ideas ? i have little knowledge of android (phone related only) and am a bit stumped.
bl1nky
bl1nky said:
hi guys, i'm having issues trying to install market. i have tried this file and the one from o_g. with no luck. i can dl find and execute the file. when i comes to reboot i get the android out of the box symbol (which i'm assuming is bad ?)and have to power down the vega to get it to boot again, without market ? any ideas ? i have little knowledge of android (phone related only) and am a bit stumped.
bl1nky
Click to expand...
Click to collapse
Have you got the cwm?
original_ganjaman said:
Thanks for this.
I have edited it and added the smalltaskbar, works great. Cheers
Click to expand...
Click to collapse
You're welcome. There are some apps I have difficulty in finding in the market. I think it's due to the market trying to aquire location. I cannot install the official twitter app either. Trying to find solutions.
demonknight9 said:
Have you got the cwm?
Click to expand...
Click to collapse
thanks for response. no i don't have cwm, do i need it ?
bl1nky said:
thanks for response. no i don't have cwm, do i need it ?
Click to expand...
Click to collapse
No, you don't necessarily need it but it doesn't hurt if you do. It has to be done via recovery if you do though, different process. What firmware have you got?
bl1nky said:
hi guys, i'm having issues trying to install market. i have tried this file and the one from o_g. with no luck. i can dl find and execute the file. when i comes to reboot i get the android out of the box symbol (which i'm assuming is bad ?)and have to power down the vega to get it to boot again, without market ? any ideas ? i have little knowledge of android (phone related only) and am a bit stumped.
bl1nky
Click to expand...
Click to collapse
The android out of the box symbol is fine thats when it is flashing the files. there should be a progress bar that turns orange, after that happens the device should reboot its self. The only requirement is you are running stock v1.08.
demonknight9 said:
You're welcome. There are some apps I have difficulty in finding in the market. I think it's due to the market trying to aquire location. I cannot install the official twitter app either. Trying to find solutions.
Click to expand...
Click to collapse
I have noticed launcher pro does not show in the market had to install manually. i have tried changing the market files, but that does not work, so it might be as you say down to location, or i think it could be to do with are device name on the market, maybe advent does not want us to have those apps. I cant remember where the device name is. I will have to look further.
original_ganjaman said:
The android out of the box symbol is fine thats when it is flashing the files. there should be a progress bar that turns orange, after that happens the device should reboot its self. The only requirement is you are running stock v1.08.
Click to expand...
Click to collapse
Thanks o_g, there is no progress bar? And if i leave the vega notfhing happens. Running stock 1.08. I'm wonering if i have been sent a second or a return. The battery was fully charged out of the box and the screen polythene had most definately been removed and replaced. Need to do some more reading methinks
Thanks for the assistance guys, my memory card was the culprit. I had swapped it for a bigger one, and not copied the contents. Sorted now tho now to get flash working properly
demonknight9 said:
No need to install modaco R6 as it is not fully compatible with the latest vega firmware 1.8.
Click to expand...
Click to collapse
If I did this to my vega on the 25th January when it was delivered. what symptoms might present?
It seems to be working well bar "horizontal line gfx glitches" occasionally on the screen.
swollox said:
If I did this to my vega on the 25th January when it was delivered. what symptoms might present?
It seems to be working well bar "horizontal line gfx glitches" occasionally on the screen.
Click to expand...
Click to collapse
It works ok, you need to delete some of the apk's out of files/system/app. things like car home can be deleted and other little things. Like that it will not run out of space when you install it and it will not give you errors. This is just another option, that's all. Some more goodies will come along from modaco and xdadev like the new R7 rom addon that were made specifically for the 1.08 firmware.
thanks man, i just changed the 0 to a 1 at the end and it worked, then market updated the second time i opened it.
been trying to do this for over 2 wks
So I've tried alot of Nand builds lately (Like TyphooN CM7, CMYLXGO's Stock Desire, and a few others) and it seems none of them allow me to use gps ill open google maps and it will say waiting for location then after like 2-3 mins it will say your current location is temporarily unavailable I've also tried using the GPS Status Tool to try and download GPS Assistance data to see if that would help but it doesn't ):
Anybody have any idea's why it doesn't work? and how i can fix it?
Did the gps work before? does it work with winmo or igo my way (any gps software) . You can try and flash again the radio,maybe do task 29 and then radio.
Can you use adb?
If so, check your /system/etc/gps.conf file.
Make sure NTP_SERVER=north-america.pool.ntp.org
Many builds have it set to "europe" or "asia" by default.
oh yeah maybe he didn't change in the config file before he flashes ,right?
Yeah I'm having the same problem I change the gps.config and replace the lib files. Gonna flash a different radio and see if it works
Sent from my HTC HD2 using XDA App
Seems to be a very few people out there with phones that don't work with the NAND builds at all with GPS. If your phone still works using Winmo then I would suggest using one of the SD builds instead. Especially if you changed your gps.conf file and it still doesn't work. Did you try the files that are found on the Instantaneous GPS Fix thread?
Try FasterFix and GPS Status to fix it
I have the same issue. It used to work and for the hell of it, I flashed a WinMo 6.5 (CR192 DESIRE HD v6.5.3.1.0 Stable - 1.1 Vibrant GTX Released) with QuickGPS and it worked and I got a GPS lock/fix. However, I flashed back to a Android NAND and GPS can't get a fix. There are lots of people in the [Mar.1.2011] Instantaneous GPS Fixation CWR v1.1 RELEASED! who say they can't get a fix even after modifying gps.conf. I think it's a kernel driver issue or all the hardware isn't the same or something.
Can I change that gps.cfg without reflashing? Mine is set to Asia....
knickfan5745 said:
Can I change that gps.cfg without reflashing? Mine is set to Asia....
Click to expand...
Click to collapse
Yes.
Option 1 : You use rootexplorer to modifiy the file.
Or
Option 2 : You use Droidexplorer on PC which allow you to explore the phone and get/put file. So you get gps.conf, you modify it and you put it back.
Or
Option 3 : you use adb.
I like DroidExplorer for this kind of operation. Simple and efficient
htcvidi said:
Yes.
Option 1 : You use rootexplorer to modifiy the file.
Or
Option 2 : You use Droidexplorer on PC which allow you to explore the phone and get/put file. So you get gps.conf, you modify it and you put it back.
Or
Option 3 : you use adb.
I like DroidExplorer for this kind of operation. Simple and efficient
Click to expand...
Click to collapse
Thanks I'll give it a try right now.
So just open the gps.cfg in notepad correct?
Yes, with notepad for example.
knickfan5745 said:
Thanks I'll give it a try right now.
So just open the gps.cfg in notepad correct?
Click to expand...
Click to collapse
You can also use "vi" to edit the file straight from the adb shell.
Stroll around.
I tried changing the gps config file myself it was wrong too so i got excited it might work ;~; and I've tried the faster fix thing before but it still didn't work but that so I'm gonna try the flashing wimo and see if works there it used to work awhile back and super well too then one day i went to use it and it was gone Dx
Hi guys,
some time( 6 months) looking for an Android 1.6, 2.1, 2.2 stable for my HTC HD (Blackstone), but each have different views and more negative ,
I noticed that most systems Android Not Working GPS,Bluetooth, Photo Camera and some applications, but I think maybe someone has found a good version of Android,
Tell me a good and stable OS Android.
Now running WM6.5 Energy, Dinik Glass.Mar.21.
And it would be better if you say a few opinions about Android OS,
Worth the Android operating system on HTC HD ?
Thanks in advance.
EDIT :
- For those seeking a Good and Fast Android. Thanks to All for all ->>
- Looking at the bottom of pages to find everything you need
This is Android 2.2.2
For files to work Android 2.2.2 go to post # 62 is 3 files ,copi to folder where is Haret
Good Luck !
gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Edit: I have checked it, this FRX06_Full_Bundle_25.3.2011 is a 24h build
note that with no wifi enabled.
And the first build that do not get that warm when wifi is enabled
Click to expand...
Click to collapse
Nobody even give me an answer ?
I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!
The Best!
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Edit: I have checked it, this FRX06_Full_Bundle_25.3.2011 is a 24h build
note that with no wifi enabled.
And the first build that do not get that warm when wifi is enabled
I tried FRX06 too.. but it's not as fast as Froyo 2.2.1 CBV2.. You have to prepare you're sd card (making partitions and stuff; all explained here) but it's really worth it!
playerxl said:
I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!
Click to expand...
Click to collapse
You says to overclock my HTC HD, but that does not mean that changes (overclock) to speed procesor to burn it ? Like a procesor of Computer EX: procesor curent speed 1800 GHZ off 3000+ (procesor product AMD) but if i change speed of 2400 GHZ if posible to burn it, corect ?
Could also work a 2,4,6,7 months time, and then burn the procesor ?
I had an experience with the HTC Touch Diamond and burned to overclock the processor to 528 MHZ I went up to 688 MHZ, and after 2 weeks after he died (CPU burn, I find that to the guarantee, I have a friend who works HTC Service and that verdict has given me )
I am a little afraid to do overclock the HTC HD after I lived experience
playerxl said:
I'm using Froyo 2.2.1 CBV2. It's a good and stable rom. Cam & Wifi works. So you can play around with this rom while waiting for a good CyanogenMod 7 rom
Good luck!
Edit: I advice you to change rom in order to overclock your touch hd. Energy rom looks flashy but it's very slow (no offence).. I used it for quite a while.. but when changing rom I saw the real speed of touch hd!
Click to expand...
Click to collapse
About Energy Rom Glass Dinik, version March 21,phone works super well and fast, I have this version of 4/5 days and are pleased.
But as I said, I want to try Android OS.
gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Click to expand...
Click to collapse
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
I need to do partition of 8 GB card ?? , Give me some more detailed installation steps,
Thanks
DjMaryuslive said:
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
Thanks
Click to expand...
Click to collapse
First of all XDAndroid will not replace WinMo completely, yet.
There's no need to do any overclocking. You can, but it might cause instability issues.
Also, there's not one package that just runs 'out of the box' on Blackstone (Touch HD).
They either have missing functionality (GPS, Google Apps, whatever) or you need to follow a certain installation procedure.
Check out if this works for you:
- Get the FRX06 bundle from the Touch Pro/Fuze thread, follow the installation guide there too, but...
- use the correct startup.txt and ts-calibration (attached to post)
- get the special Blackstone kernel and rootfs by g3rm0 (see my signature), and then with everything on the SD card...
- follow the steps i described and you should be a happy camper.
Noroc
DjMaryuslive said:
Need to do overclocking ?
And if not, and if you do not mind give me the steps how to install Android OS you mentioned above,
I need to do partition of 8 GB card ?? , Give me some more detailed installation steps,
Thanks
Click to expand...
Click to collapse
I have those partition on my 8GB card. But i dont know if that helps.
Look at this video on youtube, download that program and do exactly as he did.
http://www.youtube.com/watch?v=aCV7Eu1pjWQ&feature=related
And follow steps that hrk7474 said.
Thanks!
Yes, use that build first and than try to use Froyo 2.2.1 CBV2 ...
You've to find out what Froyo build is really working for you..
For FRX06 you don't have to make partition of your 8gb sd card
For Froyo 2.2.1 CBV2 you do.. but it works well and still faster than the FRX06 build..
You don't have to overclock your phone if you don't want to!
So it's up to you.. Android is not fully optimized for our blackstones yet.. most things will work... But it's not as fast as it should be.. That's why the overclocking can be handy!
But you'll have to find that out yourself... Good luck!
gadar said:
This is the best rom i ever had,
wifi works
cam works
I think bluetoth works too, I just started once and it founds other devices.
fast, and verry stable. I had it on for about 50h without any crash, after that i restarted due to wifi error.
With wifi on and doing some thinks, like smsing browsing, playing a game some minutes it lasted for about 11-12h.
I think if you having this rom in standby mode, it will propably last more than 12h, I haven't checked it.
With this rom and this rootfs, it works like a charm!
Rom:
http://htcandroid.xland.cz/FRX06_Full_Bundle_25.3.2011.zip
Rootfs:
http://forum.xda-developers.com/attachment.php?attachmentid=546462&d=1300543569
I forgot to mention that I have Energyrom, but i agree with the previous post.
Google goggles works too and every other app!
Good luck!
Click to expand...
Click to collapse
STARTUPS folder -> Blackstone where put the startup.txt file? together with the file: Haret, Android apps, conf, etc, etc?
Or leave them there in the folder Blackstone
i tri to instal android you gave me and is say : Waiting for SD Card and noting hapend
DjMaryuslive said:
STARTUPS folder -> Blackstone where put the startup.txt file? together with the file: Haret, Android apps, conf, etc, etc?
Or leave them there in the folder Blackstone
i tri to instal android you gave me and is say : Waiting for SD Card and noting hapend
Click to expand...
Click to collapse
As I'm sure is described in the installation guide in the thread where you got the FRX06 bundle from, yes, the startup goes where haret is.
By the way, have you looked at this thread at all?
'Waiting for SD' is the 3rd question dealt with in the FAQ. The fix worked for me when i had the SD-card issue. (I later removed it from the startup and my SD has been working fine
I further advise you to read the other threads as well and use the search function, because if this is your first serious attempt to run XDAndroid on a Blackstone i seriously doubt there's anything you will run into that nobody has experienced or dealt with before.
Don't get me wrong, we're all glad to help out eachother, but most of the answers are all over the forums already.
hrk7474 said:
As I'm sure is described in the installation guide in the thread where you got the FRX06 bundle from, yes, the startup goes where haret is.
By the way, have you looked at this thread at all?
'Waiting for SD' is the 3rd question dealt with in the FAQ. The fix worked for me when i had the SD-card issue. (I later removed it from the startup and my SD has been working fine
I further advise you to read the other threads as well and use the search function, because if this is your first serious attempt to run XDAndroid on a Blackstone i seriously doubt there's anything you will run into that nobody has experienced or dealt with before.
Don't get me wrong, we're all glad to help out eachother, but most of the answers are all over the forums already.
Click to expand...
Click to collapse
I already tried it and no response,otherwise you can help me ?
DjMaryuslive said:
I already tried it and no response,otherwise you can help me ?
Click to expand...
Click to collapse
There are two (tree) possible fixes for "Waiting for SD card" issue
1. Make sure it's formatted to FAT32 filesystem.
if that doesn't work than
2. Open startup.txt --> find set cmdline and add this: msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
it that doesn't work either you can only try another card. My 8GB Transcend card refused to work so I had to buy an old class 2 SanDisk 2GB. Good thing they are dirt cheap now
g3rm0 said:
There are two (tree) possible fixes for "Waiting for SD card" issue
1. Make sure it's formatted to FAT32 filesystem.
if that doesn't work than
2. Open startup.txt --> find set cmdline and add this: msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave
it that doesn't work either you can only try another card. My 8GB Transcend card refused to work so I had to buy an old class 2 SanDisk 2GB. Good thing they are dirt cheap now
Click to expand...
Click to collapse
same problem,the problem is the card 8Gb,thanks
Pff....
I tried all the above versions of Android and without any results, after restart back to windows mobile phone, why ??
My SD Card doesn't seem to work, why?
Most SD Cards are working, but if you the 'waiting for SDCard' message, you should try one of these fixes (and please let us know if it works)
Fix 1: Format your card with this tool http://www.sdcard.org/consumers/formatter/
Fix 2: Edit your startup.txt file and add these red entries to your cmdline:
set cmdline "lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
Fix 3: Tell your wife / girlfriend that you are about to make some modifications to her phone... change the ringtone and steal her old Class 2 SD Card to use with Android. She will never discover what you have done, and if she does, you'll be able to use Android to send texts to your former girlfriends ;-)
Copy and paste from:
http://forum.xda-developers.com/showthread.php?t=627749
Follow that if you having card problem.
Thanks
HELP
gadar said:
My SD Card doesn't seem to work, why?
Most SD Cards are working, but if you the 'waiting for SDCard' message, you should try one of these fixes (and please let us know if it works)
Fix 1: Format your card with this tool http://www.sdcard.org/consumers/formatter/
Fix 2: Edit your startup.txt file and add these red entries to your cmdline:
set cmdline "lcd.density=240 msmts_calib=0x395.0x3c9.0x79.0x77 clock-7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=-2,-1,3
msmsdcc_1bit msmsdcc_fmax=14000000 msmsdcc_nopwrsave"
Fix 3: Tell your wife / girlfriend that you are about to make some modifications to her phone... change the ringtone and steal her old Class 2 SD Card to use with Android. She will never discover what you have done, and if she does, you'll be able to use Android to send texts to your former girlfriends ;-)
Copy and paste from:
http://forum.xda-developers.com/showthread.php?t=627749
Follow that if you having card problem.
Thanks
Click to expand...
Click to collapse
I have a big problem when you need to calibrate the screen ... but I do not look to the cross with calibrate the screen.
It`s Show me the screen and first cross calibration ( in top left corner ) for 2 seconds ( I do not see the calibration screen, how can I do if I can not see the calibration screen ? ) and then continues installing Android,after the installation is complet i can not use the touchscreen because is not calibrated.
I use Startup.txt and ts-Calibration,but .... no efect
Mention that the 8GB card is not working I found a 1GB card and it works
Or tell me how you've done and the steps that you made when you put the files on the card,
All Android versions have the same problem, HELP !!!!
Thanks
I think after the first corner the calibration spot will appear after that the other calibration spots wont show up, but just push each corner after you see the first top left cal.ponit, then efter when you have pushed all other corners and are about to push the top right corner push once again the top left corner then it should proceed as normal....Thats what i was expierenced with this FRX06 build.
Or just put calibriation file in the folder where haret is started, main folder. Startup file must also be there, both files is for your Blackstone. You will find Startup file in the STARTUPS folder and the calibrations file from the link below.
Here you have calibrations files for your blackstone:
http://www.neopeek.com/viewtopic.php?f=14&t=6420&sid=e6dc7b1623778926cd9a7596329049e7
Good luck.
Hey all,
I'm usually pretty good at figuring these types of things out, but unfortunately I haven't been able to figure this one out yet.
Wifi works fine in WinMo 6.5 and WinPhone 7. I haven't tried SD version of Android, but I'd rather not go that route as I want to be able to use a fully functioning NAND version of Android.
I have done Task29/wipe data/cache/dalvik cache on many occasions, repartitioned, reinstalled WinMo 6.5 and then started over with MAGLDR (latest version), replaced wifi module libraries, but nothing has proven to work. Everything else is perfect, though.
Somebody has to have experienced this before? I couldn't find much in terms of a solution by searching.
Thanks!
What HD2 Radio version are you using?
What Android ROM are you using?
Have you made sure that it is a MAGLDR version you are trying to install, not the cLK version?
Why would you need to replace the WiFi module librarys as your ROM should work without error after installation?
A bit more info and we should be able to sort this one out!
custommsp said:
Hey all,
I'm usually pretty good at figuring these types of things out, but unfortunately I haven't been able to figure this one out yet.
Wifi works fine in WinMo 6.5 and WinPhone 7. I haven't tried SD version of Android, but I'd rather not go that route as I want to be able to use a fully functioning NAND version of Android.
I have done Task29/wipe data/cache/dalvik cache on many occasions, repartitioned, reinstalled WinMo 6.5 and then started over with MAGLDR (latest version), replaced wifi module libraries, but nothing has proven to work. Everything else is perfect, though.
Somebody has to have experienced this before? I couldn't find much in terms of a solution by searching.
Thanks!
Click to expand...
Click to collapse
Hey. Thanks for joining!
- Radio 2.15.50.14 and one of the older ones which was installed when I picked up this phone
- Roms:
NDT MIUI Froyo V6.2 currently.
Tried [CWR] BOYPPC-SHIFTPDA_GINGER 2.3.4-Sense.s V29 (12.Jun), CMYLXGO's Stock Desire HD(2) NAND ROM v1.1.17 and a few others i can't remember. All MAG versions.
I tried replacing the libs, because i've read that as part of a fix for related wifi problems from earlier this year.
Thanks!
custommsp said:
Hey. Thanks for joining!
- Radio 2.15.50.14 and one of the older ones which was installed when I picked up this phone
- Roms:
NDT MIUI Froyo V6.2 currently.
Tried [CWR] BOYPPC-SHIFTPDA_GINGER 2.3.4-Sense.s V29 (12.Jun), CMYLXGO's Stock Desire HD(2) NAND ROM v1.1.17 and a few others i can't remember. All MAG versions.
I tried replacing the libs, because i've read that as part of a fix for related wifi problems from earlier this year.
Thanks!
Click to expand...
Click to collapse
You have the most common Radio 2.15.50.14 so that isn't the problem.
The fix is mainly for cLK versions so it could use the PPP interface but if you are using MAGLDR then that isn't needed - this alone could be your problem, I reccomend not installing this patch any more?!
I play with roms a lot and normally my errors are due to using a kernel which the rom wasn't developed for - or more recently, frequent drops to the internet.
When my drops happened, I had done nothing different but it seems that a change in CM7 source now addressed my routers security settings differently - I have no idea when it was added and I was lucky enough to find a firmware update for my router which solved the problem.
Out of interest, when you click on wifi, does it say error or does it try to connect and randomly drop? Error would indicate a kernel/radio/hardware problem and dropping or not connecting would possibly indicate router problem.
Possibly, one of the best places to start is the security settings of your router, disable all security and see if it will connect... if it does then apply security - I use WPA2 PSK TKIP and it now works for me!
NDT MIUI Froyo V6.2 & CMYLXGO's Stock Desire HD are quite old (In terms of development), BOYPPC-SHIFTPDA_GINGER 2.3.4-Sense.s V29 is new and updated frequently so i'm unsure why all would have the same problem?!?!.
You could also try my rom located in my signature "HardDroid2" as I have extensively tested this and have no problems (Not trying to punt my rom at all!).
If changing your router settings or no other roms work then it is beyond me as there are only a few combinations af possible hardware/software faults!
Hope this helps
Already installed Is the phone supposed to boot in Airplane mode enabled for the first boot?
Ok, unfortunately the same issue with WiFi. What happens when i turn wifi on is it takes about 15 seconds for the check to appear in the box, then it stays on for about 15 more seconds with no networks showing, then it turns off automatically. The same thing with every rom I've tried, unless I start messing with libs or conf files at which point I get "error" or it doesn't turn on at all.
Thanks!
custommsp said:
Already installed Is the phone supposed to boot in Airplane mode enabled for the first boot?
Thanks!
Click to expand...
Click to collapse
Ummmm... NOPE!
I think your problem is with your radio rom. I would reccomend starting from scratch!
This is what I do and it works fine for me:
Prep SD Card: Format FAT32 and also create a 1GB Ext3 Partition (For apps2SD if needed)
Copy the rom update.zip to FAT32 partition of SD Card & Insert into phone.
Run HSPL3_PKG.exe and install HSPL 2.08
Flash Radio_Leo_2.15.50.14
Run Task 29 - wipe phone
Install MAGLDR 1.1.3
start device (Hold down power button until menu list appears) choose USB Flasher
Install Recovery 150MB System/5MB Cache (ClockworkMod Recovery v4.0.0.0)
Start MAGLDR (Hold down power button until menu list appears) Select "AD Recovery"
Boot ClockworkMod and install update.zip from SD Card.
I'm not trying to teach you how to suck eggs... but maybe there is a little step you may of missed?!?!?
deano309 said:
Ummmm... NOPE!
I think your problem is with your radio rom. I would reccomend starting from scratch!
This is what I do and it works fine for me:
Prep SD Card: Format FAT32 and also create a 1GB Ext3 Partition (For apps2SD if needed)
Copy the rom update.zip to FAT32 partition of SD Card & Insert into phone.
Run HSPL3_PKG.exe and install HSPL 2.08
Flash Radio_Leo_2.15.50.14
Run Task 29 - wipe phone
Install MAGLDR 1.1.3
start device (Hold down power button until menu list appears) choose USB Flasher
Install Recovery 150MB System/5MB Cache (ClockworkMod Recovery v4.0.0.0)
Start MAGLDR (Hold down power button until menu list appears) Select "AD Recovery"
Boot ClockworkMod and install update.zip from SD Card.
I'm not trying to teach you how to suck eggs... but maybe there is a little step you may of missed?!?!?
Click to expand...
Click to collapse
Much appreciated, I'll give this a try.
custommsp said:
Much appreciated, I'll give this a try.
Click to expand...
Click to collapse
I would reccomend re-downloading the files, especially the radio rom as I have a feeling it may be corrupted - don't know why it would work on WP7 though??
Use the HSPL3_PKG.exe to install HSLP 2.08 as it is regarded as the best.
I use Loader 2.10 KSubedi (MAGLDR 1.1.3 Debranded) just for asthetic reasons.
We will get there!!! lol
Same deal, unfortunately. I've noticed that the mac address is "unavailable" at all times, including the 10 secs the wifi is actually on (according to the switch)
custommsp said:
Same deal, unfortunately. I've noticed that the mac address is "unavailable" at all times, including the 10 secs the wifi is actually on (according to the switch)
Click to expand...
Click to collapse
Did you re-download the radio from here?: http://www.multiupload.com/QP0IWGY42F
I don't understand why your wifi works under wm6.5 (which installs during flashing rom) & WP7 (which runs the same way as android nand) but not under android... I would of classed it as a corrupted file and im completely at a loss!!!!
It can't be a hardware fault and there isn't any differences in earlier/later versions of the HD2's wifi module!!!
OK, I admit it.... I'm stumped!
deano309 said:
Did you re-download the radio from here?: http://www.multiupload.com/QP0IWGY42F
I don't understand why your wifi works under wm6.5 (which installs during flashing rom) & WP7 (which runs the same way as android nand) but not under android... I would of classed it as a corrupted file and im completely at a loss!!!!
It can't be a hardware fault and there isn't any differences in earlier/later versions of the HD2's wifi module!!!
OK, I admit it.... I'm stumped!
Click to expand...
Click to collapse
Yep, that file. Maybe I need to install the latest Tmobile 6.5 rom and start from that?
custommsp said:
Yep, that file. Maybe I need to install the latest Tmobile 6.5 rom and start from that?
Click to expand...
Click to collapse
If you install the latest rom and then task 29, you still have the radio version which installed with the rom as task 29 doesn't touch that section!
I remember a couple of years ago when I changed the wifi module on a PSP that it no longer held a mac address when using original Sony firmware... has your device been in for repair?
Just a thought really, i'm grabbing at straws since it really doesn't make sense to me!
deano309 said:
If you install the latest rom and then task 29, you still have the radio version which installed with the rom as task 29 doesn't touch that section!
I remember a couple of years ago when I changed the wifi module on a PSP that it no longer held a mac address when using original Sony firmware... has your device been in for repair?
Just a thought really, i'm grabbing at straws since it really doesn't make sense to me!
Click to expand...
Click to collapse
I'm not sure about its history as I bought it used. Tomorrow is another day with more opportunities to resolve this issue.
Nothing changed by me installing a stock T-mobile WinMo 6.5 then going through the process of converting to NAND android. I found out that I'm not able to save a manual Wi-Fi network entry. Maybe this is a clue for the problem?
Thanks!
custommsp said:
Nothing changed by me installing a stock T-mobile WinMo 6.5 then going through the process of converting to NAND android. I found out that I'm not able to save a manual Wi-Fi network entry. Maybe this is a clue for the problem?
Thanks!
Click to expand...
Click to collapse
Well looking into the kernel, it seems that it will create a custom MAC address for each device to get past the 00:11:22:33:44:55 issue (I don't know what variables it would use to create this but possibly imei???)
There are no really adjustable settings in wpa_supplicant.conf which would help (As far as I can see)
Since you aren't showing a MAC address, it would indicate a problem with your hardware (as no other device has this problem) But why Windows roms would still work is beyond me and the only change in hardware revisions over the life of the HD2 has been to the lcd screen and not the radio hardware.
I have searched and tried to find more information on this but i'm unable to find a conclusive answer or solution
Here is a thought: Download the files which I use from here: http://www.andbuddy.com/files/FOBBu1308083933.html
This contains all the files which I use and a small guide - Please follow ALL the steps as this has given me a 100% working device!
If it still doesn't work after this then I will have to admit that i'm beaten
deano309 said:
Well looking into the kernel, it seems that it will create a custom MAC address for each device to get past the 00:11:22:33:44:55 issue (I don't know what variables it would use to create this but possibly imei???)
There are no really adjustable settings in wpa_supplicant.conf which would help (As far as I can see)
Since you aren't showing a MAC address, it would indicate a problem with your hardware (as no other device has this problem) But why Windows roms would still work is beyond me and the only change in hardware revisions over the life of the HD2 has been to the lcd screen and not the radio hardware.
I have searched and tried to find more information on this but i'm unable to find a conclusive answer or solution
Here is a thought: Download the files which I use from here: http://www.andbuddy.com/files/FOBBu1308083933.html
This contains all the files which I use and a small guide - Please follow ALL the steps as this has given me a 100% working device!
If it still doesn't work after this then I will have to admit that i'm beaten
Click to expand...
Click to collapse
Before doing all of this I have decided to try a SD version of Android. It's producing the same result!
I'm have the same problem . please help us
spellcaster said:
I'm have the same problem . please help us
Click to expand...
Click to collapse
I'm suspecting that the actual wifi related hardware is damaged somewhere, maybe the coaxial cable, at least in my phone.
Do you try solution : http://forum.xda-developers.com/showthread.php?t=827521
i try but i can't do step 6 :
"6. Go to menu Device -> File Explorer. New window will come up."
it not show file
- I Think problem relate with hardware because with the same Room , same Radio , same Wif network other device ok but of me false
- If you have new information or new SOLUTION please send email for me [email protected]
Thanks
Hi guys, bit of a newbie here.
Ive seen on the site abut getting gps to work on this version and followed instructions but nothing seems to work.
It got me thinking... would an external Bluetooth GPS work instead? Just as a bit of a work around?
Many thanks for your help here
johnpodlesak said:
Hi guys, bit of a newbie here.
Ive seen on the site abut getting gps to work on this version and followed instructions but nothing seems to work.
It got me thinking... would an external Bluetooth GPS work instead? Just as a bit of a work around?
Many thanks for your help here
Click to expand...
Click to collapse
Do u mean that u have tried this too. http://forum.xda-developers.com/showthread.php?t=1100114
It work for me and a lot of other people who tried it.
nghockcheng said:
Do u mean that u have tried this too. http://forum.xda-developers.com/showthread.php?t=1100114
It work for me and a lot of other people who tried it.
Click to expand...
Click to collapse
The OP may also want to check the gps.conf file to determine if it is optimized for the region. Check this thread out as well: http://forum.xda-developers.com/showthread.php?t=953630
I am using Tytung's Gingerbread 2.3.5 Nexus HD2 v2.9 build with both the GPS v2.0 and an optimized gps.conf file on my phone. First locks are under 10 seconds and relocks are almost immediate using the built-in Google Navigation on the phone. Without the optimized gps.conf file, first lock was around 20 seconds. Tytung's ROM is set up for the North America. If you are not in North America, then you will need to change the gps.conf file to match your region.
The build-in gps must work, but a bluetooth gps will work to.
Sent from my mercury using XDA App
GPS problem
Hey guys I don't want to open a new thread, so I'll just post here...
I have the same GPS problems as most people here – GPS Status and GPS Essentials are showing no satellites, 0 visible and 0 used for fix.
I’ve left the phone to search for 10min in couple of occasions and nothing.
I think I’ve tried about everything here to fix it (and this is begging to bug me majorly)...
Updated the libraries with v2.0 RPC tytungs update (before that I’ve used the AngleDeath Europe.zip patch)…
Then edited the gps.conf file
first added the eurpe.pool.ntp.org,
then tried following lines
0.europe.pool.ntp.org;
1.europe.pool.ntp.org;
…etc.
Event tried the (my) country specific server address (pulled it of from the NTP POOL PROJECT website)
rs.pool.ntp.org
Installed the xtra.bin injector
Tried it on a perfect summer day and/or night, with 3g and WIFI on… but no results…
I’m running
CyanogenMod-7-NIGHTLY-Desire[TyphooN_V3.5.7-MAGLDR]
Tytungs r11_beta2 kernel (the lock screen lag fix)
CW 3.1.0.0
Radio Leo 2.15.50.14
Any ideas?
hi, this is what ive used but i must be doing something wrong and dont understand what im doing with the files etc
Im using MDJ_GingerBread_HD2_v.1.0_RC4_RAM_MODDED SC Card version
does that make any difference?
Is anyone with this problem using one of the latest roms with agps support? I can lock on in about 20 seconds from a restart. Also is everyone on the latest magldr?
never had any problems using MDJ Gingerbread... no editing or anything else - it works perfect right from the get-go...
t00tall said:
Hey guys I don't want to open a new thread, so I'll just post here...
I have the same GPS problems as most people here – GPS Status and GPS Essentials are showing no satellites, 0 visible and 0 used for fix.
I’ve left the phone to search for 10min in couple of occasions and nothing.
I think I’ve tried about everything here to fix it (and this is begging to bug me majorly)...
Updated the libraries with v2.0 RPC tytungs update (before that I’ve used the AngleDeath Europe.zip patch)…
Then edited the gps.conf file
first added the eurpe.pool.ntp.org,
then tried following lines
0.europe.pool.ntp.org;
1.europe.pool.ntp.org;
…etc.
Event tried the (my) country specific server address (pulled it of from the NTP POOL PROJECT website)
rs.pool.ntp.org
Installed the xtra.bin injector
Tried it on a perfect summer day and/or night, with 3g and WIFI on… but no results…
I’m running
CyanogenMod-7-NIGHTLY-Desire[TyphooN_V3.5.7-MAGLDR]
Tytungs r11_beta2 kernel (the lock screen lag fix)
CW 3.1.0.0
Radio Leo 2.15.50.14
Any ideas?
Click to expand...
Click to collapse
I think the problem is that on your build they recommend using Tytung's NMEA and not the RPC file that you tried. Try loading v2.0 NMEA by Tytung and give it a try. On some of these builds, only one of these files will work. I suspect your build is one that will need only the NMEA file to make the GPS work properly.
slbenz said:
I think the problem is that on your build they recommend using Tytung's NMEA and not the RPC file that you tried. Try loading v2.0 NMEA by Tytung and give it a try. On some of these builds, only one of these files will work. I suspect your build is one that will need only the NMEA file to make the GPS work properly.
Click to expand...
Click to collapse
Yeha, I’ve noticed a after my post here that in the “update” list of the TyphooN ROM is stated that the NMEA lib is implemented in it… anyhow, re-loaded the NMEA lib… edited the .conf file again… rebooted… injected the xtra.bin … left the phone outside for like 5min to try to find any satellites… 0 hits :/
Man, this is frustrating… I would hate to have to change or re-flash the rom, I’m quite satisfied with this one… maybe I’ll switch to iOS XD
t00tall said:
Yeha, I’ve noticed a after my post here that in the “update” list of the TyphooN ROM is stated that the NMEA lib is implemented in it… anyhow, re-loaded the NMEA lib… edited the .conf file again… rebooted… injected the xtra.bin … left the phone outside for like 5min to try to find any satellites… 0 hits :/
Man, this is frustrating… I would hate to have to change or re-flash the rom, I’m quite satisfied with this one… maybe I’ll switch to iOS XD
Click to expand...
Click to collapse
With all the changes that you did, you may have no choice but to reflash the ROM again. Then only change the gps.conf files to your region after the reflash if it is not correct for your area. Then hopefully your GPS will be working again. If after all that, and it still doesn't work, you may have to look in the GPS antenna to see if it is working.
slbenz said:
With all the changes that you did, you may have no choice but to reflash the ROM again. Then only change the gps.conf files to your region after the reflash if it is not correct for your area. Then hopefully your GPS will be working again. If after all that, and it still doesn't work, you may have to look in the GPS antenna to see if it is working.
Click to expand...
Click to collapse
I've flashed my phone (yet again) the newest build of the TyphooN ROM... edited the .conf file, AND... nothing :| maybe I wrote the conf file in a wrong way... should it look like this?
i54.tinypic. com/11qgv8h.png (c/p the link for a screenshot of the conf file - I still cant post outside links)
any help would be greatly appreciated!
t00tall said:
I've flashed my phone (yet again) the newest build of the TyphooN ROM... edited the .conf file, AND... nothing :| maybe I wrote the conf file in a wrong way... should it look like this?
i54.tinypic. com/11qgv8h.png (c/p the link for a screenshot of the conf file - I still cant post outside links)
any help would be greatly appreciated!
Click to expand...
Click to collapse
Unfortunately, I can't see the link. Maybe you should try the quick and easy way to change your region by using FasterFix that is free on the Market. At least it will quickly change your first gps.conf file line to the correct region and hopefully get you a gps lock. I suspect that the gps.conf file you are changing may not be correct or possibly the changes you are making are not being taken and the original gps.conf file keeps staying? I don't think it is the build. I've used TyphooN in the past with my custom gps.conf file that I use with no problem.
slbenz said:
Unfortunately, I can't see the link. Maybe you should try the quick and easy way to change your region by using FasterFix that is free on the Market. At least it will quickly change your first gps.conf file line to the correct region and hopefully get you a gps lock. I suspect that the gps.conf file you are changing may not be correct or possibly the changes you are making are not being taken and the original gps.conf file keeps staying? I don't think it is the build. I've used TyphooN in the past with my custom gps.conf file that I use with no problem.
Click to expand...
Click to collapse
Thnx anyway... I think I'm going to flash the win 6.5 back on... to check is my GPS receiver working... maybe it's a hardware fault, I've recently purchased it used, and flashed it to android immediately...