Related
Is there a dummies guide to creating a bootable sd card for the Nook? I'm trying to follow the instructions here:
http://forum.xda-developers.com/showthread.php?t=1030227&page=61
but I can't seem to get the Nook to recognize the card. My goal is to root my Nook 1.3 so I can use the Amazon App Store. If there is an easier method I would love to give it a try.
Check out the guide in my sig.
Sent from space
I used this 5 part series youtube videos as a reference when I did my first CM7 install to run from SD. For me at least it is a lot easier to understand the process when I can see it.
koopakid08 said:
Check out the guide in my sig.
Sent from space
Click to expand...
Click to collapse
Thanks for the reply. The instructions were basically what I followed but they do not explain how to make the SD card bootable.
Thanks Imbroglio I'll check out the videos.
My issue was my internal card reader was being viewed as a floppy drive...had to use a USB card reader.
Sent from my Nexus S using xda premium
lithium630 said:
Thanks for the reply. The instructions were basically what I followed but they do not explain how to make the SD card bootable.
Thanks Imbroglio I'll check out the videos.
Click to expand...
Click to collapse
You just plug your SD card into your computer open up WIN32DISKIMAGER as admin, select the drive letter of your SD card, select the image you have to burn, now click burn image. Then pop it into your Nook and bam.
Sent from space
The image makes the card bootable. You don't have to do anything else after the image is successfully loaded to the card.
1. download Win32DiskImager (older version preferred, r15 or something)
2. download CwM R (either 3.0.2.8 or newest 3.2.0.1 depends on your system)
3. execute the Win32DiskImager
4. Browse to select the drive (uSD) and the image file (step 2 above) then click Write.
Done.
niteskie said:
My issue was my internal card reader was being viewed as a floppy drive...had to use a USB card reader.
Sent from my Nexus S using xda premium
Click to expand...
Click to collapse
I'm guessing this is my issue. I'm using a cheap micro sd to usb adapter. I did the same steps the others have mentioned. Seems like it should be pretty self explanatory. I'll try picking up a card reader.
Success! I had the wrong Win32diskimager zip file. (I tried both). With the help of Youtube I got the correct version and am all set. I appreciate the help and patience.
lithium630 said:
Success! I had the wrong Win32diskimager zip file. (I tried both). With the help of Youtube I got the correct version and am all set. I appreciate the help and patience.
Click to expand...
Click to collapse
Great to hear you got it going. These folks are a LOT of help.
When I first started I had the same problems with getting IMG files correctly to the card.
I've recently figured out how to do this and it's pretty simple, but since there isn't a thread like this one yet, I might as well post a tutorial on how to do it and be of assistance to those of you who haven't figured it out yet.
1. Download and install the latest version of the app 'SGS3 Easy UMS'.
http://forum.xda-developers.com/showthread.php?t=1711009
2. Download and install the free 'EaseUS Partition Master 9.1.1 Home Edition'.
http://download.cnet.com/EaseUS-Partition-Master-Home-Edition/3000-2248_4-10863346.html
3. Plug your phone into your computer with the SD card inside. Make sure the computer can recognize the phone is in MTP mode.
4. Open SGS3 Easy UMS and press 'UMS mode'. Your external SD card will now be recognized as a removable disk.
5. Open EaseUS Partition Master, select the removable disk and press 'Format'. Choose FAT32 as file system. Finally, press 'Apply'. Your SD has now been formatted to FAT32.
6. Go back to SGS3 Easy UMS and select 'Mount card'. Unplug the phone.
7. Restart your phone.
8. Enjoy!
PS: To be sure of your succes, you must use EaseUS Partition Master and nothing else. I tried Minitool Partition Wizard at first and it did not work.
I knew this already,
Btw sd card reader is very cheap, everyone has it.
Laptops have it inbuilt
Thanks. Good guide. Sometimes I just cannot find a card reader when I need it. This should solved my problem
Sent from my GT-I9300 using xda app-developers app
buggingme said:
I knew this already,
Btw sd card reader is very cheap, everyone has it.
Laptops have it inbuilt
Click to expand...
Click to collapse
I know but i cheaped out on my custom pc by not getting one
Arsaw said:
Thanks. Good guide. Sometimes I just cannot find a card reader when I need it. This should solved my problem
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Your very welcome Glad I could help.
Joskezz said:
I've recently figured out how to do this and it's pretty simple, but since there isn't a thread like this one yet, I might as well post a tutorial on how to do it and be of assistance to those of you who haven't figured it out yet.
1. Download and install the latest version of the app 'SGS3 Easy UMS'.
http://forum.xda-developers.com/showthread.php?t=1711009
2. Download and install the free 'EaseUS Partition Master 9.1.1 Home Edition'.
http://download.cnet.com/EaseUS-Partition-Master-Home-Edition/3000-2248_4-10863346.html
3. Plug your phone into your computer with the SD card inside. Make sure the computer can recognize the phone is in MTP mode.
4. Open SGS3 Easy UMS and press 'UMS mode'. Your external SD card will now be recognized as a removable disk.
5. Open EaseUS Partition Master, select the removable disk and press 'Format'. Choose FAT32 as file system. Finally, press 'Apply'. Your SD has now been formatted to FAT32.
6. Go back to SGS3 Easy UMS and select 'Mount card'. Unplug the phone.
7. Restart your phone.
8. Enjoy!
PS: To be sure of your succes, you must use EaseUS Partition Master and nothing else. I tried Minitool Partition Wizard at first and it did not work.
Click to expand...
Click to collapse
Hey thanks. I'm going to give this a try as I have tried and failed formatting my card as a FAT32 that is workable with UMS mode it would work but never ever mount with the mass storage app. You're sure it mounts in mass storage mode right?
Sent from my GT-I9300 using xda app-developers app
Nice guide, but only necessary if you're one of the ones having trouble with your card on exFAT formatting.
SlimJ87D said:
Hey thanks. I'm going to give this a try as I have tried and failed formatting my card as a FAT32 that is workable with UMS mode it would work but never ever mount with the mass storage app. You're sure it mounts in mass storage mode right?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Absolutely sure
http://imageshack.us/photo/my-images/844/pic2bi.png/ (Zoom in)
As you can see in the photo, my SD card is running as removable storage, with file system FAT32.
NZtechfreak said:
Nice guide, but only necessary if you're one of the ones having trouble with your card on exFAT formatting.
Click to expand...
Click to collapse
Well it benefits those that like to play movies on their PS3, Samsung HDTVs, etc.
But I guess getting a MHL cable would solve that.
Sent from my GT-I9300 using xda app-developers app
NZtechfreak said:
Nice guide, but only necessary if you're one of the ones having trouble with your card on exFAT formatting.
Click to expand...
Click to collapse
And also because only Sammy based Roms support the exFAT file system.
Joskezz said:
And also because only Sammy based Roms support the exFAT file system.
Click to expand...
Click to collapse
Do you have a Ps3 or XBoX to connect it into to see if it works?
Sent from my GT-I9300 using xda app-developers app
SlimJ87D said:
Do you have a Ps3 or XBoX to connect it into to see if it works?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
I'm sorry, I do not, my ps3 just recently got the yellow light of death
Sent from my GT-I9300 using xda app-developers app
I'm gonna try it today with my girlfriends' brothers' xbox and get back to you.
This is not working for me. I get an error when pressing UMS mode. It tells me that it cannot find the path to my external SD card. Any Ideals?
I used this to easily format my 64gig micro to fat32
http://www.ridgecrop.demon.co.uk/index.htm?fat32format.htm
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Saviour
I spent hours doing searches on XDA trying to find an app or other method since my sd card reader didn't want to work and then I came across this guide.
Absolutely amazing.
Thanks.
welll my microsd fried randomly today too (Lexar 32gb class 10) ... tried to do this method because I dont have a microsd reader... well didnt work out too well because it keeps saying "could not find location" to sd 1
I have Sandisk Ultra 64 GB microSDXC Class 10 UHS-1 which is exFAT formatted. The only problem I have is that Clockwork Mod will not mount it in recovery. My work around is to remove and replace the card with my old 32GB one which is FAT32 formatted.
* * * * * Will this procedure allow that (use with in recovery)?
Anyway there is an Amazon Black Friday weekend special for these for $35 delivered (with prime).
there is a warning / cautionary note which reads:
"Reformat into file system other than exFAT may cause instability"
For Guys who have issues with SD Cards (Formatting,Mounting,Errors,Corruption or even Death of Card) :
A full format (uncheck quick format)running HP USB Disk Storage Format Tool is recommended.
Moreover,never ever use SD card Adapters for formatting.Always USB card readers as they are more efficient.
Generic operating system formatters don’t provide the optimum performance.And,sometimes,can result into SD card death and less picture-saving space.
Full format once in awhile is recommended to prevent possible corrupt files, lengthen the life of the card and achieve the most available space possible.
This tool is compatible with Windows XP and vista however Windows 7 users can run this tool in Compatibility mode for Windows 7 by going through :
Properties>Compatibility>Compatibility mode>Check(Run this program in compatibility mode for)>Select Windows 7 from dropdown menu>Apply>OK
Click to expand...
Click to collapse
Cheers!!!:good:
1 question man. One of my sd card doesnt even read when i insert it to pc. Will this software solve the problem? I think the sd card is corrupt.
Sent from Hell!!
.xxx. said:
1 question man. One of my sd card doesnt even read when i insert it to pc. Will this software solve the problem? I think the sd card is corrupt. Sent from Hell!!
Click to expand...
Click to collapse
Yep,a full format(uncheck quick format) using this tool should solve your problem.I was facing the same issue with one of my cards.
Don't used SD card Adapter for formatting,use a USB card reader.Hope it will get your card back in action.
You can also run surface test using MiniTool Partition Wizard to check any read error in your SD card's memory blocks.
(Right click on your card>surface test)
Good luck:good:
optimusodd said:
For Guys who have issues with SD Cards (Formatting,Mounting,Errors,Corruption or even Death of Card) :
A full format (uncheck quick format)running HP USB Disk Storage Format Tool is recommended.
Moreover,never ever use SD card Adapters for formatting.Always USB card readers as they are more efficient.
Generic operating system formatters don’t provide the optimum performance.And,sometimes,can result into SD card death and less picture-saving space.
Full format once in awhile is recommended to prevent possible corrupt files, lengthen the life of the card and achieve the most available space possible.
This tool is compatible with Windows XP and vista however Windows 7 users can run this tool in Compatibility mode for Windows 7 by going through :
Cheers!!!:good:
Click to expand...
Click to collapse
Can we foormat or reinstall an death usb micro sd adapter ?
Sent from my HTC Wildfire using xda premium
Pator57 said:
Can we foormat or reinstall an death usb micro sd adapter ?Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
Sorry,I didn't get you.
SD adapter is used to make your micro SD usable on normal SD slot devices.It is not any type of memory.
If you are reffering to a dead micro SD card,a full format (uncheck quick format) using this tool might fix your problem.
Always use USB card readers for the formatting process.
optimusodd said:
Sorry,I didn't get you.
SD adapter is used to make your micro SD usable on normal SD slot devices.It is not any type of memory.
If you are reffering to a dead micro SD card,a full format (uncheck quick format) using this tool might fix your problem.
Always use USB card readers for the formatting process.
Click to expand...
Click to collapse
I don't want to be a smart-ass here but seriously... Initially I thought you'd mean a card reader with "SD adapter"... if you're speaking about micro sd adapters: nothing wrong to use those as it's just a kind of "connector extension" - the only thing that might go wrong is that the slot has a mechanical problem. That usually would end up in getting nothing formatted
Anyway thx for the hint with the application - could become useful some time
optimusodd said:
Sorry,I didn't get you.
SD adapter is used to make your micro SD usable on normal SD slot devices.It is not any type of memory.
If you are reffering to a dead micro SD card,a full format (uncheck quick format) using this tool might fix your problem.
Always use USB card readers for the formatting process.
Click to expand...
Click to collapse
ho ****.And yes i was talking about an micro sd adaptater who died..
Sent from my HTC Wildfire using xda premium
After an update of the play store my phone registered my card as being "not recognized"
Is this likely to fix the problem? - My computer recognizes the micro sd...
Sent from my HTC Wildfire using xda premium
THE-M1GHTY-BUKO said:
After an update of the play store my phone registered my card as being "not recognized"
Is this likely to fix the problem? - My computer recognizes the micro sd...
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
What is the size of your SD card ?Probably,it's running out of space.
Format your card from within the phone settings first(Settings > Storage).
You will need this tool if that doesn't help.
Pator57 said:
ho ****.And yes i was talking about an micro sd adaptater who died..Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
LOL,this tool can't fix your dead adapter.:silly:You need a new adapter.
eventcom said:
I don't want to be a smart-ass here but seriously... Initially I thought you'd mean a card reader with "SD adapter"... if you're speaking about micro sd adapters: nothing wrong to use those as it's just a kind of "connector extension" - the only thing that might go wrong is that the slot has a mechanical problem. That usually would end up in getting nothing formatted Anyway thx for the hint with the application - could become useful some time
Click to expand...
Click to collapse
Yeah,of course,you can transfer files using adapters but USB card reader is recommended for the formatting process.
This tool was created specifically for HP USB devices so only a USB SD card reader can be used as interface device.
The most amazing thing about this tool is ,it does a very deep cleansing.While other formatting tools take 3-4 mints to format an 8GB SD card,this tool takes 4-5 hours to ensure most efficient formatting.I have used and verified this tool personally.Using generic formatting utilities don’t provide optimal performance for your SD cards.
I just thought it might be good to list a tip that might help others with their SD card issues.
I wonder :S
Hi I have a 8GB MicroSD card, suddenly it went slow down.. I formatted it using various applications but it doesn't affect it takes so long to paste a file(s) I dunno but it ask around 25 minutes to paste a 250MB file and sometimes it increases to hours.. I didn't even found any bad sectors.. every sector is ok but it's useless without fast data writing.. anyone ever faced this type of matter? :crying:
I NEED HELP!!! I have a 32gb micro sd card and the above process does not work.
Why is this here? Shouldn't it be somewhere like hardware and software hacking or something...
Anyway dont use adapters makes no sense, like that one guy just said: Its just ... ...
However im not on sense rom so i may make no sense myself
Hi
I need some help. I think my 2gb sdcard got corrupted and my willy doesnot reads it anymore although i have tried another sdcard and it works.
So problem is with sdcard. My computer wont recognise it too ( i tried it with my wildfire not with any card reader or adaptor )
I download that hp exe file but how can it work if my pc doesn't reads sdcard ?
Is there a way that i can use any software and plug sdcard in an adaptor ? And format it etc ?
Because i dont own an adaptor or a usb card reader. I'll probably lend an adaptor today but for usb card reader i'll have to wait for a day or two
I really need my sdcard working
Now i have 2 corrupted sdcards.
2gb card and 4 gb card.
Btw will my pc read the sdcard or show it if i use an adaptor ? Coz i've never used it before.
Sent from my HTC Wildfire using xda app-developers app
alamgirqazi said:
Hi
I need some help. I think my 2gb sdcard got corrupted and my willy doesnot reads it anymore although i have tried another sdcard and it works.
So problem is with sdcard. My computer wont recognise it too ( i tried it with my wildfire not with any card reader or adaptor )
I download that hp exe file but how can it work if my pc doesn't reads sdcard ?
Is there a way that i can use any software and plug sdcard in an adaptor ? And format it etc ?
Because i dont own an adaptor or a usb card reader. I'll probably lend an adaptor today but for usb card reader i'll have to wait for a day or two
I really need my sdcard working
Now i have 2 corrupted sdcards.
2gb card and 4 gb card.
Btw will my pc read the sdcard or show it if i use an adaptor ? Coz i've never used it before.
Sent from my HTC Wildfire using xda app-developers app
Click to expand...
Click to collapse
I doubt it'll help!
This tool was designed to format flash drives and it does a deep format,which is helpful in removing problematic partitions from those drives(sd cards).
I have been using this tool for good 2 years now,it has helped me curing pen drives,sd cards which were already readable on windows.(cured issues like i/o errors,cyclic redundancy issue,etc.).But if windows doesnt read it then I doubt it'll help.
Try with some linux system if you have.But,you can consider your card to be dead sadly.
Wasimk32 said:
I doubt it'll help!
This tool was designed to format flash drives and it does a deep format,which is helpful in removing problematic partitions from those drives(sd cards).
I have been using this tool for good 2 years now,it has helped me curing pen drives,sd cards which were already readable on windows.(cured issues like i/o errors,cyclic redundancy issue,etc.).But if windows doesnt read it then I doubt it'll help.
Try with some linux system if you have.But,you can consider your card to be dead sadly.
Click to expand...
Click to collapse
Nooooo
I cant just let go 2 sd cards go away easily and also i've no extra sdcard at the moment. And i doubt i'll get another one soon.
I dont have a Linux OS but i think there's gotta be a way. I searched alot so far but had no luck uptill now.
My suggestion to everyone: PLEASE TAKE SOMETIME OUT OF YOUR LIFE AND ALWAYS REMOVE THE SDCARD SAFELY.
Please some more suggestions guyz.
Sent from my HTC Wildfire using xda app-developers app
alamgirqazi said:
Nooooo
I cant just let go 2 sd cards go away easily and also i've no extra sdcard at the moment. And i doubt i'll get another one soon.
I dont have a Linux OS but i think there's gotta be a way. I searched alot so far but had no luck uptill now.
My suggestion to everyone: PLEASE TAKE SOMETIME OUT OF YOUR LIFE AND ALWAYS REMOVE THE SDCARD SAFELY.
Please some more suggestions guyz.
Sent from my HTC Wildfire using xda app-developers app
Click to expand...
Click to collapse
Exactly!
This shows you the importance of spending those 2-3 seconds in removing it safely and also having backups of your stuff!
Wasimk32 said:
Exactly!
This shows you the importance of spending those 2-3 seconds in removing it safely and also having backups of your stuff!
Click to expand...
Click to collapse
Yeah
Sent from my HTC Wildfire using xda app-developers app
I cant do that , when using that tool it says "Failed to format the device". Plzzzz helllpppp
Hello. I have a hudge problem with my phone. Somehow it automatically unmounts and remounts my sd card for no reason no matter what rom I use. Sometimes it unmounts my sd card and don't mount for a month. Sometimes it gives damaged sd card error and asks to format it but when I insert my card to tablet and it detects no errors. What could be the problem? Can anyone help me fix this?
Repartition your SD card in recovery
But save your data first
Sent from my Galaxy Nexus using xda premium
You must clearing ext partition in recovery and format sdcard. + set min cpu fraquancy on 245Mhz.
didn't help
If it does happen with all roms you've tested, including stock 2.1 then your SD card is propably faulty. You formatted it under Windows?
shadovraven said:
If it does happen with all roms you've tested, including stock 2.1 then your SD card is propably faulty. You formatted it under Windows?
Click to expand...
Click to collapse
I can't try stock rom because it says that my recovery is to new. SD card can't be faulty because it is new. I had other sd card earlier but my phone didn't recognized it so I bought new. And i have formatted under Windows.
username_lt said:
I can't try stock rom because it says that my recovery is to new. SD card can't be faulty because it is new. I had other sd card earlier but my phone didn't recognized it so I bought new. And i have formatted under Windows.
Click to expand...
Click to collapse
Check the SD card under different phone, most simple as it can get.
shadovraven said:
Check the SD card under different phone, most simple as it can get.
Click to expand...
Click to collapse
sd card working fine on my android tablet
Which ROM are you using?
Now using cm9
Sent from my Acme TB02 using xda app-developers app
Then you have to check different roms and kernels to see under which your SD card works properly. I suggest trying newest AOSP / SDSL or CM 7.2 by Tejas build three.
Maybe is the slot of your SD Card, Why?:
Using every ROM, same device and same problem = device
Used other device and everything ok = the "other" device
So, definitely your slot on your device is bad. Good Luck!
leoposas said:
Maybe is the slot of your SD Card, Why?:
Using every ROM, same device and same problem = device
Used other device and everything ok = the "other" device
So, definitely your slot on your device is bad. Good Luck!
Click to expand...
Click to collapse
Maybe. But I can only try other roms because warranty is over and I do not have funds for this right now... Some day I will fix it or maybe not:victory:
Thank you for all your help
Now I realy messed up my sd card. It shows 2.9gb free storage instead of 4gb. Phone can`t recognize it at all(in recovery I can see it) and I can`t transfer any files. How to fix this?
Sent from my Acme TB02 using xda app-developers app
username_lt said:
Now I realy messed up my sd card. It shows 2.9gb free storage instead of 4gb. Phone can`t recognize it at all(in recovery I can see it) and I can`t transfer any files. How to fix this?
Sent from my Acme TB02 using xda app-developers app
Click to expand...
Click to collapse
How did you partition it?
Sent from my Galaxy Nexus using xda premium
andreas__ said:
How did you partition it?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
via recovery, not remember what options I selected:victory:
username_lt said:
via recovery, not remember what options I selected:victory:
Click to expand...
Click to collapse
Which cwm version?
Sent from my Galaxy Nexus using xda premium
Just delete all partitions and make new (FAT32) with some Live CD if U don't have Linux on PC (for best get gParted Live).
Next put it in Your phone and partition again with CWM 6.0, or just use fat32.
Some customized roms mess up sd card if it has /swap.
Noticed this in some 2.3 custom rom, but don't remember name of it.
T
Vsx06 said:
Just delete all partitions and make new (FAT32) with some Live CD if U don't have Linux on PC (for best get gParted Live).
Next put it in Your phone and partition again with CWM 6.0, or just use fat32.
Some customized roms mess up sd card if it has /swap.
Noticed this in some 2.3 custom rom, but don't remember name of it.
Click to expand...
Click to collapse
Not sure how to do that. Can you help me? Mini tutorial or sth? I am with windows7
Sent from my Acme TB02 using xda app-developers app
andreas__ said:
Which cwm version?
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
Cmw 5.5.0.
Sent from my Acme TB02 using xda app-developers app
When I wanted to delete something from my nook color running cm10 night lies I could not delete it and a notification pop out saying system restriction delete failed but when my nook color is running cm7.2 i had no problem deleting files can anybody explain to me for this observation? Thank you for reading and hope you have a nice day!
Sent from my Nexus S using xda app-developers app
If the file is on SD... you may have ran into the occasional SD becoming read only under CM10 that periodically rears its ugly head.
So does it mean that there is no solution? Thanks anyway.
Sent from my Nexus S using xda app-developers app
INEEDHELPPLSHELP said:
So does it mean that there is no solution? Thanks anyway.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
It means you may have to use a different SD. CM10 is real finicky about SD cards.
Sent from my Nook HD+ Running CM10 on SD
I have used sdcard no. 1 to install cm 10 but I use sdcard no. 2 to download additional files and apps and use it as the device's main sdcard meaning I use it. I tried a different sd card also but still can't delete files and using cm10, I realized that there are some hidden files with unknown symbols I don't know what are those I saw them when I use androzip but on other file manager I don't see them and I can't delete them BTW should I use cm7.2 or cm 10.
Sent from my Nexus S using xda app-developers app
INEEDHELPPLSHELP said:
I have used sdcard no. 1 to install cm 10 but I use sdcard no. 2 to download additional files and apps and use it as the device's main sdcard meaning I use it. I tried a different sd card also but still can't delete files and using cm10, I realized that there are some hidden files with unknown symbols I don't know what are those I saw them when I use androzip but on other file manager I don't see them and I can't delete them BTW should I use cm7.2 or cm 10.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
Those unknown symbol files mean that CM10 is sometimes corrupting some files when it writes. That is why it is mounting the SD as read only. It sees that corruption. Try creating a file with your CM10 file manager. If you cannot, it means it is mounted read only.
Try getting the free SDFormatter program and running that on your PC to reformat the no. 2 SD to fix any corruption.
Sent from my Nook HD+ Running CM10 on SD
But I'm also able to delete some files and some files I can't.
Sent from my Nexus S using xda app-developers app
INEEDHELPPLSHELP said:
But I'm also able to delete some files and some files I can't.
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
It can't delete those corrupted files. Re-format.
Sent from my Nook HD+ Running CM10 on SD
leapinlar said:
It can't delete those corrupted files. Re-format.
I have reformatted it but it still says system restriction delete failed and unzip operation failed. Another question why cant i unzip it and why is my sd card named sdcard1 instead of thr name i named it. In case you dont know i want to hack glu credits the video is here. this is the video http://www.youtube.com/watch?v=76aczBNLp2Q Another thing is that when i want to format my sd card on sdformatter i cant see my sdcard.
Click to expand...
Click to collapse
INEEDHELPPLSHELP said:
leapinlar said:
It can't delete those corrupted files. Re-format.
I have reformatted it but it still says system restriction delete failed and unzip operation failed. Another question why cant i unzip it and why is my sd card named sdcard1 instead of thr name i named it. In case you dont know i want to hack glu credits the video is here. this is the video http://www.youtube.com/watch?v=76aczBNLp2Q Another thing is that when i want to format my sd card on sdformatter i cant see my sdcard.
Click to expand...
Click to collapse
You have a bad SD card. Stick with Sandisk as they are more reliable.
Click to expand...
Click to collapse
I have just format my sdcard and it worked perfectly until sometimes later that the errors come up again this is annoying man.
Sent from my NookColor using xda app-developers app
Also tried downloading items from dropbox but it say storage full or unavailable.
Sent from my NookColor using xda app-developers app
Anyways to avoid getting this messages?
Sent from my NookColor using xda app-developers app
INEEDHELPPLSHELP said:
Also tried downloading items from dropbox but it say storage full or unavailable.
Sent from my NookColor using xda app-developers app
Click to expand...
Click to collapse
Boot into CWM recovery, advanced, select "partition sd card".