Problem unrooting my Galaxy S2 - Galaxy S II General

hey everybody,
i recently rooted my S2 with Odin, but now my battery drowns really fast.
As a solution I wanted to unroot it again, however I can't because the USB input on my phone is kinda broken. (I can only charge my phone).
So, I was wondering if one of u guys knows how to unroot my phone without using the USB cable??
Thanks in advance,
Stefan863

Stefan863 said:
hey everybody,
i recently rooted my S2 with Odin, but now my battery drowns really fast.
As a solution I wanted to unroot it again, however I can't because the USB input on my phone is kinda broken. (I can only charge my phone).
So, I was wondering if one of u guys knows how to unroot my phone without using the USB cable??
Thanks in advance,
Stefan863
Click to expand...
Click to collapse
Don't you have cwm recovery?
Just flash a stock kernel then...
But...don't go back this easy, fight the cause!
The kernel is pretty sure not the issue, it's the setup, just flash the latest speedmod and be happy!
Tapatalked from my Samsung GT9100

Karpfenhai said:
Don't you have cwm recovery?
Just flash a stock kernel then...
But...don't go back this easy, fight the cause!
The kernel is pretty sure not the issue, it's the setup, just flash the latest speedmod and be happy!
Tapatalked from my Samsung GT9100
Click to expand...
Click to collapse
I'll probebly use CWM recovery.
I found the link for my S2 with many ROM's but I don't know wich one to use...
Link: clockworkmod. com /rommanager/device/galaxys2/developer/daniel.hillenbrand%40codeworkx.de?manifest=http%3A%2F%2Fdeveloper.clockworkmod.com%2Fdeveloper%2Fdaniel.hillenbrand%40codeworkx.de%2Fmanifest&name=codeworkx&deviceName=Samsung%20GalaxyS2

Unroot ur phone? What's next, u want to know how to uncharge it?

Stefan863 said:
I'll probebly use CWM recovery.
I found the link for my S2 with many ROM's but I don't know wich one to use...
Link: clockworkmod. com /rommanager/device/galaxys2/developer/daniel.hillenbrand%40codeworkx.de?manifest=http%3A%2F%2Fdeveloper.clockworkmod.com%2Fdeveloper%2Fdaniel.hillenbrand%40codeworkx.de%2Fmanifest&name=codeworkx&deviceName=Samsung%20GalaxyS2
Click to expand...
Click to collapse
If you dont know such basics, you are probably at the wrong place mate..
get this file --> http://vln01.helochat.com/tourist/speedmod-kernel-s2-ics-k3-25-CWM.zip
put it onto your SD Card, boot into recovery and select "Install zip from sdcard"
clear cache and dalvik cache, reboot, thats it.
@Rude guys, we all needed to grow up.. just remember yourself..

Ok. thanks, and yea I still need to learn very much about android.

Use Mobile Odin and flash your .tar back. Use the search to find a guide/help
Sent from my GT-I9100

It happened to me. I flashed to ICS and used triangleaway to remove the triangle and flash counter
Sent from my GT-I9100

Related

[TUTORIAL] UNROOT the Galaxy S II on ICS to COMPLETE stock

How to get your rooted Galaxy S II I9100 back to complete stock
This means that you will have:
Stock Bootloader
Stock ROM
Flash Counter Set To Zero
Stock Recovery
INTRODUCTION:​So, the vibration on my SGS2 is broken, but I also rooted my phone, because, well, Samsung TouchWiz sucks. So anyway, being pedantic old me, I wanted to develop a method to reset my phone ENTIRELY to stock so that I could send it off to get repaired. I have found this method.
My main problem derived from the fact that USB Jigs no longer work on ICS which is irritating because I only just got it. I made this guide so there is finally something on the Internet where all the information is in one place.
NB: I AM NOT RESPONSIBLE FOR YOU DOING ANYTHING TO YOUR GALAXY S II AND THAT INCLUDES BRICKING THE DEVICE. YOU ARE DOING THIS WITH FULL-KNOWLEDGE OF ANY DAMAGE THAT COULD POSSIBLY BE DONE TO YOUR PHONE.
NB: ROMs like I9100XWLPM and I9100XXLQ5 are vulnerable to the eMMC bug and that willl brick your phone if you do a wipe/factory reset with CMW (probably stock too) Thanks cpl.Bower
Here's your shopping list:
A Windows PC or if you have a Mac, a Windows Virtual Machine (haven't used a vitual machine so not sure if it works, but give it a try and let me know!)
Odin which you can get here.
Chainfire's Triangle Away Application which you can get here or on the android market if you feel you want to donate to him.
ClockworkMod ROM Manager you can get here (I would highly doubt that as root user you don't have this)
Download your corresponding Stock Kernel from here.
So here is the method:
1) Open Chainfire's Triangle Away app and press "Reset flash counter" to reset the counter and remove the triangle. It does not matter if there is no triangle already.
2) Do a nandroid backup using Clockworkmod recovery if necessary (to get to it; turn off your phone, press the power button, volume up button, and home button at the same time and hold it down for a while). This is done so that you can restore your original OS like I would want to after getting my phone back from Samsung if you're restoring it for that sole purpose.
3) (Mandatory) Wipe Data/Factory Reset in recovery menu. IF YOU DON'T DO THIS, YOUR PHONE WILL BECOME STUCK ON THE "S" LOADING SCREEN. You also should wipe the cache partition and the internal SD card. The internal SD card in case you have any directories which may link you to rooting your phone, such as clockwork mod.
4) Restart into Download Mode and plug your phone into a windows computer.
5) Open Odin , click PDA, choose the STOCK kernel. Make sure that F. Reset Time, Auto Reboot and the PDA checkboxes are checked and NOTHING ELSE.
6) Click Start. The phone will restart now. It takes a while to load up as the applications need to install. Keep an eye on the phone, it'll ask you for your carrier. This does NOT mean the phone will be locked to a network.
7) Follow the instructions and set your phone up.
8) ???????
9) PROFIT
10) (Optional) You may want to check to see if your phone is set to stock to confirm. I cannot guarantee 100% that there will be no evidence of root on your phone, but hey, I still got warranty service after doing something similar to this on the old firmware.
To check to see if your flash counter is set to zero: hold down the power button, volume down button and home button until a "Warning!!" screen appears. Press volume up and make sure it says CUSTOM BINARY DOWNLOAD: NO and CURRENT BINARY: SAMSUNG OFFICIAL. You may also want to make sure that there is no warning triangle on the first screen when you start your phone
To check to see if your recovery is set to stock: hold down the power button, volume up button and the home button until your phone goes black after the first boot screen. To make sure it is stock, there should be no "CWM-based Recovery" at the top or anything indicating clockworkmod or any other custom recovery.
Any errors in the process (besides the one in the Q&A), I may not know what you have done. I have done this with my phone and it worked fine.
PLEASE REMEMBER TO RATE AND THANK ME
Q&A:
Q: I'm stuck on the "S" loading screen, what did I do wrong?
A: You didn't do a factory reset! To fix this, turn off your phone, go to recovery, wipe the data, reflash with the stock kernel and it'll be okay. If not, I have no idea what's wrong.
Q: How do I get to recovery?
A: Turn off your phone and hold down the power/sleep button, the volume up button and the home button at the same time until the first boot logo goes black, then you need to let go.
Q: DUDE, THIS TUTORIAL IS AWESOME, HOW CAN I EVER REPAY YOU OH MIGHTY MIKE?!
A: Rate this thread 5 stars and thank me.
Thanks for reading
If anyone can give feedback when they try this, I'd be thankful
Sent from my GT-I9100 using XDA
Good job
If I were sending a phone in for warranty service/replacement, I'd go a step further with the factory reset & format cache, data, system, & internal sd card in CWM, then flash stock rom in Odin, then Triangle Away (If flashing stock ICS and assuming you have new bootloader) or flash old bootloader & use jig (if flashing stock GB).
Edit to add - Obviously also do a Nandroid before the above steps so you can get up & running when you get your phone back/new phone as you said
MistahBungle said:
Good job
If I were sending a phone in for warranty service/replacement, I'd go a step further with the factory reset & format cache, data, system, & internal sd card in CWM, then flash stock rom in Odin, then Triangle Away (If flashing stock ICS and assuming you have new bootloader) or flash old bootloader & use jig (if flashing stock GB).
Edit to add - Obviously also do a Nandroid before the above steps so you can get up & running when you get your phone back/new phone as you said
Click to expand...
Click to collapse
Ah yes, I remember wiping cache and dalvik cache too I will be sure to edit my post to add that! The internal SD card's contents may give away root, haha! I'll be sure to add that too! Thanks a lot, I'll credit you!
Sent from my GT-I9100 using XDA
Nah, not wiping cache/Dalvik, actually formatting the cache partition in CWRecovery. And yeah, if you want to be absolutely sure; well as sure as possible in any event; you can't get a 100% guarantee of warranty service once you've gone down the custom firmware route, formatting the internal SD card should get rid of any potentially 'incriminating evidence'
No need to credit me, it's your guide, you deserve the credit
MiKenning said:
Ah yes, I remember wiping cache and dalvik cache too I will be sure to edit my post to add that! The internal SD card's contents may give away root, haha! I'll be sure to add that too! Thanks a lot, I'll credit you!
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
MistahBungle said:
Nah, not wiping cache/Dalvik, actually formatting the cache partition in CWRecovery. And yeah, if you want to be absolutely sure; well as sure as possible in any event; you can't get a 100% guarantee of warranty service once you've gone down the custom firmware route, formatting the internal SD card should get rid of any potentially 'incriminating evidence'
No need to credit me, it's your guide, you deserve the credit
Click to expand...
Click to collapse
Ah right sorry, I misunderstood you haha! Well, I rooted my phone before and I honestly couldn't find a trace of root and got warranty service, but you never know!
I actually got warranty service while my HTC Wildfire was rooted, so I never see at as impossible!
I shall correct the mistakes, thank you once again
My method
Seeing as I bought the USB jig, I prefer to just do a full, thorough wipe as described above, then flash back to stock GB. A quick plug in of the old jig and it's clean. Also, the warnings about messing with bootloaders being a gateway to a fully bricked device put me off.
This thread is a great idea, though. I had to trawl over so many sites to find information about things like this. Good work.
scayre32 said:
Seeing as I bought the USB jig, I prefer to just do a full, thorough wipe as described above, then flash back to stock GB. A quick plug in of the old jig and it's clean. Also, the warnings about messing with bootloaders being a gateway to a fully bricked device put me off.
This thread is a great idea, though. I had to trawl over so many sites to find information about things like this. Good work.
Click to expand...
Click to collapse
Yeah, I don't think the bootloader flash is entirely necessary, I may point that out on the method...
And thank you, i made this thread for that very reason
Sent from my GT-I9100 using XDA
Great guide, and just in time too. My SGS2 seems to have launched itself into its deathbed less than a week after the ICS update here in Australia. Battery life is barely holding overnight.
Thanks!
What are the benefits of flashing the ICS bootloader?
MaKTaiL said:
What are the benefits of flashing the ICS bootloader?
Click to expand...
Click to collapse
I put it there because it is the stock Bootloader for ICS... I had it at my disposal because I was going to flash an older bootloader so I could use USB jig and then flash back to the stock with the bootloader in the download section.
Honestly, unless you flashed some other bootloader, I wouldn't bother with it. It makes no difference really, I managed to get back to stock without doing that
Sent from my GT-I9100 using XDA
Its been along time since I last flashed through Odin (I normally flash rom's through cwm), but to get back to stock don't you simply just flash back an original rom which corresponds which your region ?
The rom should already have the correct bootloader and you should not have the yellow triangle as you have not flashed an insecure kernel ?
Sent from my GT-I9100 using Tapatalk 2
ultramic said:
Its been along time since I last flashed through Odin (I normally flash rom's through cwm), but to get back to stock don't you simply just flash back an original rom which corresponds which your region ?
The rom should already have the correct bootloader and you should not have the yellow triangle as you have not flashed an insecure kernel ?
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Because this is the only technique I find which ensures removed root and full stock on everything. Main reason for doing this instead of flashing via cwm is because this technique is extremely thorough. And what you flash in ODIN isn't a rom.
Sent from my GT-I9100 using XDA
MaKTaiL said:
What are the benefits of flashing the ICS bootloader?
Click to expand...
Click to collapse
Nothing as flashing a stock ROM via Odin will flash the same Bootloader anyway.
Sent from my GT-I9100 using Tapatalk 2
I'm currently running a rooted GT-l900T on ICS 4.0.3 (Australia/Vodafone) and am trying to follow your guide, but there's one thing I'm unclear about.
You say to download a stock kernel for my phone. How do I tell which kernel to download? I'm currently running a rooted XWLP9, should I be flashing a stock version of this? Will it do any damage if it's the incorrect kernel?
I found the XWLP9 stock kernel in the link you provided, but it says that the region is Netherlands and the carrier is also different to mine. Does this matter?
I'm trying to claim warranty tomorrow for a hardware problem, and would appreciate an answer ASAP. Thanks for your time!
hey if i use custom rom like resurrection remix can i unroot my phone but still use the custom rom?
Squiddo said:
I'm currently running a rooted GT-l900T on ICS 4.0.3 (Australia/Vodafone) and am trying to follow your guide, but there's one thing I'm unclear about.
You say to download a stock kernel for my phone. How do I tell which kernel to download? I'm currently running a rooted XWLP9, should I be flashing a stock version of this? Will it do any damage if it's the incorrect kernel?
I found the XWLP9 stock kernel in the link you provided, but it says that the region is Netherlands and the carrier is also different to mine. Does this matter?
I'm trying to claim warranty tomorrow for a hardware problem, and would appreciate an answer ASAP. Thanks for your time!
Click to expand...
Click to collapse
Hello, sorry for the wait, I've been doing important exams and have been occupied!
I just saw you're comment and I'm sorry you've had trouble. I have been doing much searching to help solve your problem and I *may* have found it.
I do warn you, i do not know the safety of this kernel and thus am not responsible for damage done this will be of your own consent if you did decide to proceed.
Here is a post I found while searching and it contains an international version of the XWLP9 firmware, maybe this is what you are looking for? I hope this helps!
Sent from my GT-I9100 using XDA
@thunderbald
I don't think this guide would work for you, sorry.
Sent from my GT-I9100 using XDA
Rated and thanked cheers fella.
Juan Kerzhoff said:
Rated and thanked cheers fella.
Click to expand...
Click to collapse
No problem thank you
Sent from my GT-I9100 using XDA

Galaxy note crash!!

hello guys, i am very upset and frustrated.... My Galaxy note auto upgraded to ics 4.0.3 a few days ago. though it had become a bit slow, i mean applications would take a bit longer time to open and sometime force stopped. still it was great... and yesterday i.e, 24/06/20012 my Note downloaded a auto update... after that prompted me to restart... when i did.. it restarted and went to update mode ( where you see the green android )..... after that it rebooted and where Samsung logo appears.... it is stuck there....in few minutes my Phone heats up a lot and Battery gets drained! i tried to hard reset it but with no luck....
please help if anybody has some solution... thanks
Can u use recovery to wide data cache or maybe download latest stock rom then use Odin to put back to factory if u need help let me know
Sent from my GT-N7000 using xda premium
What ics do you want to install? Lpy (europe), lp9(asian)or lp8and lpa(india).:silly:
You need new installation.
Was it rooted? or was it stock without any mods? If its later take it back to uncle Sammy and get it fixed.
Alternatively install a safe kernal via Odin-- i recommend Speedmod k3-3 and then only wipe data/factory reset via recovery.
Then try flashing the Stock Rom you want via Odin. If that doesnt work, you can explore the other options. ATM it is a soft brick, may or may not be the emmc bug..
note
mygadgetgeek.com said:
Can u use recovery to wide data cache or maybe download latest stock rom then use Odin to put back to factory if u need help let me know
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
thanks for for you help, but i am fairly new to this platform of Android... please help in explaining in simple terms i.e, how to download stock Rom etc. this phone is not rooted i am using form the day i bought.thanks
go here http://forum.xda-developers.com/showthread.php?t=1424997
download ICS for your version and flash it via ODIN.
sat9jangay said:
thanks for for you help, but i am fairly new to this platform of Android... please help in explaining in simple terms i.e, how to download stock Rom etc. this phone is not rooted i am using form the day i bought.thanks
Click to expand...
Click to collapse
I give you a warning first. If your not rooted there is a slim chance of getting a superbrick bug( by doing a factory reset or recovery data wipe) as samsung devs says. But if you root your phone that chances is big really big. But there is a solution, after your new ics installation flash safe kernel called speedmod k3-3. http://forum.xda-developers.com/showthread.php?t=1673072. It will not trigger the superbrick bug when doing a FACTORY RESET OR RECOVERY DATA WIPE, thats why its called a safe kernel. Use MOBILEODIN(get it from the google market) to flash a new rom, you root your phone first to be able to use mobileodin. After that flash speedmod k3-3 custom kernel to be safe.
For rooting ics rom. http://forum.xda-developers.com/showthread.php?t=1647148
On how to use MOBILEODIN. See youtube type mobileodin its a visual teaching much better for understanding
bring it back to Samsung for repair, don't do anything stupid if you don't know what you are doing...
shutterdogz said:
bring it back to Samsung for repair, don't do anything stupid if you don't know what you are doing...
Click to expand...
Click to collapse
If you really dont sure about it, well shutterdogz is right. Take it to samsung repair center and they are the one will install it for you to be really safe.

Build.Prop Brick (HELP)

Hi, sorry for being a noob at this but I have changed build.prop on my tab 7.7 and after reboot it will now only bootloop,,,
I would imagine you could just reflash the build.prop or do you need to do a ROM install?
Please Help.....Please
slide200sx said:
Hi, sorry for being a noob at this but I have changed build.prop on my tab 7.7 and after reboot it will now only bootloop,,,
I would imagine you could just reflash the build.prop or do you need to do a ROM install?
Please Help.....Please
Click to expand...
Click to collapse
I would think installing a rom would be easier, that's what I would do.
Sent from my GT-P6800 using xda premium
yeah it happened to me. reinstalled rom and all good. :laugh:
Thank you both very much, I really do appreciate it.
My only concern is hard bricking it now as I was reading on here doing a wipe in recovery on ICS is putting some into brick....
Could you please advise on method doing a firmware flash and what not to select or what needs to be selected.
Thank you again both of you!
Thanks button hit for both of you guys....I dont see the Thanks Button???
Oh, will it need to be flashed with HC or ICS or a custom ICS?
One last thing...would it not be possible to have a Build.prop zip made so I could just flash that?
Also, would it hurt to try a factory reset in the stock recover, I heard this could brick / damage the EMMC I think?
Thank you again, XDA is the BEST and I am a big fan of this site.
OK! Whoop Whoop all working again....I was trying to do a update.zip for recovery to flash but I could not get that working, either said cant mount SD card in CWM and when I tried the same in 3e Recovery I got the not installed text...
Thought long and hard about doing a factory reset from 3e Recovery and decided to try it, brick bug and all shown on emmc....but that didnt help or make it worse, so I bit the bullet and flashed the official ICS ROM from SAM again and now all good:good:
XDA is King and thank s for the help of both Members on here

[Q] Galaxy s4 Rooted and Custom Rom Problems

I have a Canadian S4 and rooted using the twrp method and then installed the vigin google play edition rom. Everything worked fine at first when I installed it but i was fiddling around after in twrp and thought i should format the internal storage and start completely fresh and now if I install any rom including my original backup the device will boot up into the system fine for the first time but if the device resets after that it just hangs on the galaxy S4 logo and i have to reboot into recovery and flash again. Any ideas on how i could fix this? Thanks!!!
Try this, in twrp go into advanced wipe and wipe dalvik cache, cache, system, data and android secure. Then flash your nandroid.
I don't have a nandroid I have a twrp backup
Jaygrippa said:
I don't have a nandroid I have a twrp backup
Click to expand...
Click to collapse
That is a nandroid.
Dont use TWRP for the S4
From what I have experience and I believe others have as well, if you used TWRP to format where you had to type yes, you are pretty much screwed trying to get things working properly again. Maybe it is certain phones, sd cards, roms, who knows, but after I typed yes in TWRP to format everything, I could flash a rom but couldnt restart and things were buggy. I had to use odin to flash back to stock, re-root and flash the rom again. Now everything is 190% considering my battery life went from 6 hours to 28 with medium usage.
I have always loved TWRP on my other phones, but for the S4, its more frustration and using with caution than its worth.
Another word of caution, use windows to fix your phone. Im on linux and its too much of a pain in the ass to use odin/heimdall to go back to stock for newbs. On windows I went to stock and rooted again in no time.
Good luck!
jd1639 said:
That is a nandroid.
Click to expand...
Click to collapse
After doing that stuff in twrp should I flash right back to my backup of stock touch wiz or straight into the ROM of my choosing? Whenever I would have to reflash I would have to format he internal memory or it wouldn't work
Ya I did the thing where I typed yes... Crap ya its my first time doing all this stuff so you suggest I Re do all of the rooting stuff and then flash my backup I made?
Jaygrippa said:
Ya I did the thing where I typed yes... Crap ya its my first time doing all this stuff so you suggest I Re do all of the rooting stuff and then flash my backup I made?
Click to expand...
Click to collapse
You might have to. I had the same problem today where if the phone rebooted I would just get a black screen. I ended up using Odin with the stock rom, reinstalling twrp and then restoring my backup. I'm pretty sure it was a rom I flashed that caused the initial problem and only Odin would clear things up.
Start Over
Jaygrippa said:
Ya I did the thing where I typed yes... Crap ya its my first time doing all this stuff so you suggest I Re do all of the rooting stuff and then flash my backup I made?
Click to expand...
Click to collapse
Actually its going back to stock, then rerooting. All I did was follow androidrootz guide here:
http://www.androidrootz.com/2013/06/how-to-unroot-unbrick-galaxy-s4.html
After that, motochopper back to get root and followed this guide to install OUDHS recovery:
http://forum.xda-developers.com/showthread.php?t=2291956
This worked for me, at least for now. Hope it can help you out.
ericchaffey said:
Actually its going back to stock, then rerooting. All I did was follow androidrootz guide here:
http://www.androidrootz.com/2013/06/how-to-unroot-unbrick-galaxy-s4.html
After that, motochopper back to get root and followed this guide to install OUDHS recovery:
http://forum.xda-developers.com/showthread.php?t=2291956
This worked for me, at least for now. Hope it can help you out.
Click to expand...
Click to collapse
Hey thanks a bunch ill try that out later. I am at work right now and i can still use my phone on the rom i have just as long as i dont reset it. Ill try all of this out when i get home and see if that works. Thanks for everyones help
Now the only problem is i have to find a Fido ROM
Jaygrippa said:
Hey thanks a bunch ill try that out later. I am at work right now and i can still use my phone on the rom i have just as long as i dont reset it. Ill try all of this out when i get home and see if that works. Thanks for everyones help
Click to expand...
Click to collapse
A couple other notes, to avoid other possible problems, use the original samsung cord when connecting to your computer. Switching USB ports can help if there are transfer or other issues. Its pretty easy and straight forward if everything works out well, but there are so many gawt dayum variables that minor issues can cause problems, though may never manifest.
Hopefully this works and please post some results to help the same in need.
ericchaffey said:
A couple other notes, to avoid other possible problems, use the original samsung cord when connecting to your computer. Switching USB ports can help if there are transfer or other issues. Its pretty easy and straight forward if everything works out well, but there are so many gawt dayum variables that minor issues can cause problems, though may never manifest.
Hopefully this works and please post some results to help the same in need.
Click to expand...
Click to collapse
Ya thinks i will, now im just in the process of finding a rom for Fido, they are owned by rogers so im not sure if the rogers rom will work, This android stuff is so stressful its my first android phone so i hope all goes well!
Jaygrippa said:
Ya thinks i will, now im just in the process of finding a rom for Fido, they are owned by rogers so im not sure if the rogers rom will work, This android stuff is so stressful its my first android phone so i hope all goes well!
Click to expand...
Click to collapse
I get firmware from sammobile.com. You have to register but it's free. You'll download a zip. Use 7-zip to extract the .tar.md5 file from it. Use that in Odin, PDA.
jd1639 said:
I get firmware from sammobile.com. You have to register but it's free. You'll download a zip. Use 7-zip to extract the .tar.md5 file from it. Use that in Odin, PDA.
Click to expand...
Click to collapse
ya even they dont have a specific "Fido" firmware...
Anyone know if I can just use the Rogers ROM its pretty much the same company
Jaygrippa said:
Anyone know if I can just use the Rogers ROM its pretty much the same company
Click to expand...
Click to collapse
It'll work. It'll just put their bloatware on and the boot animation will be theirs
Reflashed
Ok so i reflashed to the stock rom using odin and bam it works again, im just wondering what is a good way now too root, and install the same rom i had
This will have everything you need http://forum.xda-developers.com/showthread.php?p=42320391
Thanks everyone for your help, I got my phone back up and running stock, then i rooted using CF- Autoroot and installed twrp again. I then reinstalled the rom i wanted to use and everything is in tip top order
Jaygrippa said:
Thanks everyone for your help, I got my phone back up and running stock, then i rooted using CF- Autoroot and installed twrp again. I then reinstalled the rom i wanted to use and everything is in tip top order
Click to expand...
Click to collapse
Glad to here it. Have fun.

Please help me! Cannot get back to cwm after wipe and reboot!

Hi!
I just backed up my phone using CWM on my SD card and i wiped it but now i cannot get back to CWM! I am stuck on the stock phone, all of my data is gone, I tired installing CWM again but it just doesnt show up!
Also, KNOX got tripped for some reason!
PLEASE PLEASE PLEASE PLEASE try to help me, i'm honestly freaking out.
thank you!
REflash cwm and uncheck auto-reboot before flash.
Lennyz1988 said:
REflash cwm and uncheck auto-reboot before flash.
Click to expand...
Click to collapse
I did reflash CWM and it still doesnt come! thank you for helping but im honestly so crushed after this. i really really wanna get back to my backup.
Hanzva said:
Hi!
I just backed up my phone using CWM on my SD card and i wiped it but now i cannot get back to CWM! I am stuck on the stock phone, all of my data is gone, I tired installing CWM again but it just doesnt show up!
Also, KNOX got tripped for some reason!
PLEASE PLEASE PLEASE PLEASE try to help me, i'm honestly freaking out.
thank you!
Click to expand...
Click to collapse
Hi mate,
first of all calm....
Please more details , what S4 you have?
What rom you had and what rom you have now
please explain what you mean with I am stuck on the stock phone you mean stock recovery?
What cwm recovery you were using ? how are you re installing it?
You made a nandroid backup?
MAX 404 said:
Hi mate,
first of all calm....
Please more details , what S4 you have?
What rom you had and what rom you have now
please explain what you mean with I am stuck on the stock phone you mean stock recovery?
What cwm recovery you were using ? how are you re installing it?
You made a nandroid backup?
Click to expand...
Click to collapse
I have the i9505, everything is stock. Stock Rom before, everything. I just rooted my phone yesterday.
I meant both. My phone, software, everything is stock. Its as if it came from the box. I can, of course, just re isntall everything but I had SO MANY things.
I am using i9505 CWM Recovery 6.0.3.2
I installed it and reinstalled it using Odin3 v3.09
And yes I did, but i cant get back to it because i cant access CWM.
thank you so much for helping!
I cant help but get freaked out as I LOVED my s4 so much but now its as if i didnt own it.
i give up. i think i'll just reinstall everything back and set everything up again. this gives me the opportunity to clean everything i guess. no custom roms for me. thanks everyone!
Hanzva said:
i give up. i think i'll just reinstall everything back and set everything up again. this gives me the opportunity to clean everything i guess. no custom roms for me. thanks everyone!
Click to expand...
Click to collapse
Did you uncheck auto-reboot before flashing?
And yes I think a stock rom would be better for you. You shouldn't pannic when something goes wrong. It's almost impossible to brick your s4.
Hanzva said:
i give up. i think i'll just reinstall everything back and set everything up again. this gives me the opportunity to clean everything i guess. no custom roms for me. thanks everyone!
Click to expand...
Click to collapse
Lennyz1988 said:
Did you uncheck auto-reboot before flashing?
And yes I think a stock rom would be better for you. You shouldn't pannic when something goes wrong. It's almost impossible to brick your s4.
Click to expand...
Click to collapse
That is an option , start from o
+1 Lennyz1988
MAX 404 said:
That is an option , start from o
+1 Lennyz1988
Click to expand...
Click to collapse
thank you all so much i actually think its better off this way, i only installed the apps i actually used, getting rid of around 50% of my apps. still keeping an eye out for battery life though, and the camera is still unusable.

Categories

Resources