[DEV\HELP] ICS Optimization Script - Huawei Ideos X5 U8800

I have written a script that lets all users to customize the official ICS released by Huawei. I have tested the script but it does not work, so i want to share my work to find my errors and to help other users to optimize their phone.
I need someone who knows how to write scripts in bash......this is the script:
Code:
#! /system/bin/sh
################################
# ICS Optimizer #
# #
# by matteof93 #
################################
mount -o remount,rw -t yaffs2 /dev/block/mmcblk0 /system
main_menu()
{
clear
echo "-----------------------------------------------------"
echo "- ICS Optimizer Script -"
echo "-----------------------------------------------------"
echo "01. Unlock FPS"
echo "02. Change CPU scheduler"
echo "03. Enable Jit"
echo "04. Change Dalvik VM heapsize"
echo "05. Force Launcher in memory"
echo "06. Disable Bootanimation"
echo "07. Increase touch and scrolling responsiveness"
echo "08. Apply other build.prop tweaks"
echo "09. Prepare Android for optimization process"
echo "10. Restore defaults"
echo
echo "11. Reboot"
echo
echo "12. Exit"
echo "----------------------------"
echo -n "Select an option: "
read unlockfps
case $unlockfps in
01)
unlockfps
;;
02)
scheduler
;;
03)
jit
;;
04)
changedalvik
;;
05)
launchermemory
;;
06)
bootanimation
;;
07)
increaseresponsiveness
;;
08)
othertweaks
;;
09)
prepareandroid
;;
10)
resotredefaultsettings
;;
11)
rebootxx
;;
12)
exitxx
esac
}
main_menu
echo "Invalid Option!"
read -p "Press ENTER to continue..."
clear
main_menu
#######################################################################
noop(){
clear
cp /sdcard/ICS-Optimization-Script/Schedulers/Noop/06scheduler /system/etc/init.d
cd /system/etc/init.d
chmod 777 06scheduler
echo "Scheduler changed..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
scheduler
}
cfq(){
clear
cp /sdcard/ICS-Optimization-Script/Schedulers/Cfq/06scheduler
/system/etc/init.d
cd /system/etc/init.d
chmod 777 06scheduler
echo "Scheduler chenged..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
scheduler
}
scheduler()
{
clear
echo "-----------------------------------------------------"
echo "- CPU Scheduler Changer -"
echo "-----------------------------------------------------"
echo "01. Noop"
echo "02. Cfq"
echo
echo "03. Main Menu"
echo "----------------------------"
echo -n "Select an option: "
read noop
case $noop in
01)
noop
;;
02)
cfq
;;
03)
main menu
esac
}
#######################################################################
removefpslimit()
{
clear
cp /sdcard/ICS-Optimization-Script/UnlockFPS/08uncapfps /system/etc/init.d
cd /system/etc/init.d
chmod 777 08uncapfps
echo "FPS Unlocked..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
unlockfps
}
unlockfps()
{
clear
echo "-----------------------------------------------------"
echo "- Unlock FPS -"
echo "-----------------------------------------------------"
echo "01. Remove FPS limit"
echo
echo "02. Main Menu"
echo "--------------------------"
echo -n "Select an option: "
read removefpslimit
case $removefpslimit in
01)
removefpslimit
;;
02)
main menu
esac
}
#######################################################################
enablejit()
{
clear
echo "#Jit enabled" | tee -a /system/build.prop
echo "dalvik.vm.execution-mode=int:jit" | tee -a /system/build.prop
echo "Jit enabled..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
jit
}
disablejit()
{
clear
sed -i '/#Jit enabled/d' /system/build.prop
sed -i '/dalvik.vm.execution-mode=int:jit/d' /system/build.prop
echo "Jit disabled..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
jit
}
jit()
{
clear
echo "-----------------------------------------------------"
echo "- Enable Jit -"
echo "-----------------------------------------------------"
echo "01. Enable Jit"
echo "02. Disable Jit"
echo
echo "03. Main Menu"
echo "--------------------------"
echo -n "Select an option: "
read enablejit
case $enablejit in
01)
enablejit
;;
02)
disablejit
;;
03)
main menu
esac
}
#######################################################################
prepareandroid()
{
clear
cp /system/build.prop /sdcard/build.prop
mv /sdcard/build.prop /sdcard/build.prop.bak
mkdir /system/etc/init.d
echo "Android System prepared to optimization..."
echo "Please Reboot..."
read -p "Press ENTER to continue..."
clear
main_menu
}
#######################################################################
dalvik64()
{
clear
cd /system
sed -i 's/dalvik.vm.heapstartsize=5m/dalvik.vm.heapstartsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=12m/dalvik.vm.heapstartsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=16m/dalvik.vm.heapstartsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=24m/dalvik.vm.heapstartsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=32m/dalvik.vm.heapstartsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=48m/dalvik.vm.heapstartsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=64m/dalvik.vm.heapstartsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapsize=12m /dalvik.vm.heapsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapsize=16m /dalvik.vm.heapsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapsize=24m /dalvik.vm.heapsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapsize=32m /dalvik.vm.heapsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapsize=48m /dalvik.vm.heapsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapsize=64m /dalvik.vm.heapsize=64m/g' build.prop
echo "Dalvik VM heapsize value has been changed..."
echo "Please Reboot..."
read -p "Press ENTER to continue..."
clear
changedalvik
}
dalvik48()
{
clear
cd /system
sed -i 's/dalvik.vm.heapstartsize=5m/dalvik.vm.heapstartsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=12m/dalvik.vm.heapstartsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=16m/dalvik.vm.heapstartsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=24m/dalvik.vm.heapstartsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=32m/dalvik.vm.heapstartsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=48m/dalvik.vm.heapstartsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=64m/dalvik.vm.heapstartsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapsize=12m /dalvik.vm.heapsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapsize=16m /dalvik.vm.heapsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapsize=24m /dalvik.vm.heapsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapsize=32m /dalvik.vm.heapsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapsize=48m /dalvik.vm.heapsize=48m/g' build.prop
sed -i 's/dalvik.vm.heapsize=64m /dalvik.vm.heapsize=48m/g' build.prop
echo "Dalvik VM heapsize value has been changed..."
echo "Please Reboot..."
read -p "Press ENTER to continue..."
clear
changedalvik
}
dalvik32()
{
clear
cd /system
sed -i 's/dalvik.vm.heapstartsize=5m/dalvik.vm.heapstartsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=12m/dalvik.vm.heapstartsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=16m/dalvik.vm.heapstartsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=24m/dalvik.vm.heapstartsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=32m/dalvik.vm.heapstartsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=48m/dalvik.vm.heapstartsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=64m/dalvik.vm.heapstartsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapsize=12m /dalvik.vm.heapsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapsize=16m /dalvik.vm.heapsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapsize=24m /dalvik.vm.heapsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapsize=32m /dalvik.vm.heapsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapsize=48m /dalvik.vm.heapsize=32m/g' build.prop
sed -i 's/dalvik.vm.heapsize=64m /dalvik.vm.heapsize=32m/g' build.prop
echo "Dalvik VM heapsize value has been changed..."
echo "Please Reboot..."
read -p "Press ENTER to continue..."
clear
changedalvik
}
dalvik24()
{
clear
cd /system
sed -i 's/dalvik.vm.heapstartsize=5m/dalvik.vm.heapstartsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=12m/dalvik.vm.heapstartsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=16m/dalvik.vm.heapstartsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=24m/dalvik.vm.heapstartsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=32m/dalvik.vm.heapstartsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=48m/dalvik.vm.heapstartsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=64m/dalvik.vm.heapstartsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapsize=12m /dalvik.vm.heapsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapsize=16m /dalvik.vm.heapsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapsize=24m /dalvik.vm.heapsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapsize=32m /dalvik.vm.heapsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapsize=48m /dalvik.vm.heapsize=24m/g' build.prop
sed -i 's/dalvik.vm.heapsize=64m /dalvik.vm.heapsize=24m/g' build.prop
echo "Dalvik VM heapsize value has been changed..."
echo "Please Reboot..."
read -p "Press ENTER to continue..."
clear
changedalvik
}
dalvik16()
{
clear
cd /system
sed -i 's/dalvik.vm.heapstartsize=5m/dalvik.vm.heapstartsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=12m/dalvik.vm.heapstartsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=16m/dalvik.vm.heapstartsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=24m/dalvik.vm.heapstartsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=32m/dalvik.vm.heapstartsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=48m/dalvik.vm.heapstartsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=64m/dalvik.vm.heapstartsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapsize=12m /dalvik.vm.heapsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapsize=16m /dalvik.vm.heapsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapsize=24m /dalvik.vm.heapsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapsize=32m /dalvik.vm.heapsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapsize=48m /dalvik.vm.heapsize=16m/g' build.prop
sed -i 's/dalvik.vm.heapsize=64m /dalvik.vm.heapsize=16m/g' build.prop
echo "Dalvik VM heapsize value has been changed..."
echo "Please Reboot..."
read -p "Press ENTER to continue..."
clear
changedalvik
}
dalvik12()
{
clear
cd /system
sed -i 's/dalvik.vm.heapstartsize=5m/dalvik.vm.heapstartsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=12m/dalvik.vm.heapstartsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=16m/dalvik.vm.heapstartsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=24m/dalvik.vm.heapstartsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=32m/dalvik.vm.heapstartsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=48m/dalvik.vm.heapstartsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=64m/dalvik.vm.heapstartsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapsize=12m /dalvik.vm.heapsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapsize=16m /dalvik.vm.heapsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapsize=24m /dalvik.vm.heapsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapsize=32m /dalvik.vm.heapsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapsize=48m /dalvik.vm.heapsize=12m/g' build.prop
sed -i 's/dalvik.vm.heapsize=64m /dalvik.vm.heapsize=12m/g' build.prop
echo "Dalvik VM heapsize value has been changed..."
echo "Please Reboot..."
read -p "Press ENTER to continue..."
clear
changedalvik
}
restoredefault()
{
clear
cd /system
sed -i 's/dalvik.vm.heapstartsize=5m/dalvik.vm.heapstartsize=5m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=12m/dalvik.vm.heapstartsize=5m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=16m/dalvik.vm.heapstartsize=5m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=24m/dalvik.vm.heapstartsize=5m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=32m/dalvik.vm.heapstartsize=5m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=48m/dalvik.vm.heapstartsize=5m/g' build.prop
sed -i 's/dalvik.vm.heapstartsize=64m/dalvik.vm.heapstartsize=5m/g' build.prop
sed -i 's/dalvik.vm.heapsize=12m /dalvik.vm.heapsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapsize=16m /dalvik.vm.heapsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapsize=24m /dalvik.vm.heapsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapsize=32m /dalvik.vm.heapsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapsize=48m /dalvik.vm.heapsize=64m/g' build.prop
sed -i 's/dalvik.vm.heapsize=64m /dalvik.vm.heapsize=64m/g' build.prop
echo "Dalvik VM heapsize value has been changed..."
echo "Please Reboot..."
read -p "Press ENTER to continue..."
clear
changedalvik
}
changedalvik()
{
clear
echo "-----------------------------------------------------"
echo "- Dalvik VM heapsize changer -"
echo "-----------------------------------------------------"
echo "01. Set Dalvik VM heapsize to 48"
echo "02. Set Dalvik VM heapsize to 32"
echo "03. Set Dalvik VM heapsize to 24"
echo "04. Set Dalvik VM heapsize to 16"
echo "05. Set Dalvik VM heapsize to 12"
echo "06. Restore default Dalvik VM heapsize value"
echo
echo "07. Main Menu"
echo "--------------------------"
echo -n "Select an option: "
read dalvik48
case $dalvik48 in
01)
dalvik48
;;
02)
dalvik32
;;
03)
dalvik24
;;
04)
dalvik16
;;
05)
dalvik12
;;
06)
restoredefault
;;
07)
main menu
esac
}
#######################################################################
launchermemoryin()
{
clear
echo "#Force Launcher in memory" | tee -a /system/build.prop
echo "ro.home_app_adj=1" | tee -a /system/build.prop
echo "Launcher forced in memory..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
launchermemory
}
launchermemoryout()
{
clear
sed -i '/#Force Launcher in memory/d' /system/build.prop
sed -i '/ro.home_app_adj=1/d' /system/build.prop
echo "Launcher forced in memory..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
launchermemory
}
launchermemory()
{
clear
echo "-----------------------------------------------------"
echo "- Force Launcher in memory -"
echo "-----------------------------------------------------"
echo "01. Force Launcher in memory"
echo "02. Remove Launcher from memory"
echo
echo "03. Main Menu"
echo "--------------------------"
echo -n "Select an option: "
read launchermemoryin
case $launchermemoryin in
01)
launchermemoryin
;;
02)
launchermemoryout
;;
03)
main menu
esac
}
#######################################################################
nobootanimation()
{
clear
echo "#Bootanimation disabled" | tee -a /system/build.prop
echo "debug.sf.nobootanimation=1" | tee -a /system/build.prop
echo "Bootanimation disabled..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
bootanimation
}
bootanimationon()
{
clear
sed -i '/#Bootanimation disabled/d' /system/build.prop
sed -i '/debug.sf.nobootanimation=1/d' /system/build.prop
echo "Bootanimation enabled..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
bootanimation
}
bootanimation()
{
clear
echo "-----------------------------------------------------"
echo "- Enable\Disable Bootanimation -"
echo "-----------------------------------------------------"
echo "01. Disable Bootanimation"
echo "02. Enable Bootanimation"
echo
echo "03. Main Menu"
echo "--------------------------"
echo -n "Select an option: "
read nobootanimation
case $nobootanimation in
01)
nobootanimation
;;
02)
bootanimationon
;;
03)
main menu
esac
}
#######################################################################
applytweaks()
{
clear
echo "#Increase Touch\Scrolling responsiveness" | tee -a /system/build.prop
echo "windowsmgr.max_events_per_sec=150" | tee -a /system/build.prop
echo "video.accelerate.hw=1" | tee -a /system/build.prop
echo "debug.performance.tuning=1" | tee -a /system/build.prop
echo "ro.min.fling_velocity=8000" | tee -a /system/build.prop
sed -i 's/ro.max.fling_velocity=4000/ro.max.fling_velocity=12000/g' build.prop
echo "Tweaks applied..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
increaseresponsiveness
}
defaults()
{
clear
sed -i '/#Increase Touch\Scrolling responsiveness/d' /system/build.prop
sed -i '/windowsmgr.max_events_per_sec=150/d' /system/build.prop
sed -i '/video.accelerate.hw=1/d' /system/build.prop
sed -i '/debug.performance.tuning=1/d' /system/build.prop
sed -i '/ro.min.fling_velocity=8000/d' /system/build.prop
sed -i 's/ro.max.fling_velocity=12000/ro.max.fling_velocity=4000/g' build.prop
echo "default settings restored..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
increaseresponsiveness
}
increaseresponsiveness()
{
clear
echo "-----------------------------------------------------"
echo "- Touch\Scrolling responsiveness -"
echo "-----------------------------------------------------"
echo "01. Apply tweaks"
echo "02. Restore default"
echo
echo "03. Main Menu"
echo "--------------------------"
echo -n "Select an option: "
read applytweaks
case $applytweaks in
01)
applytweaks
;;
02)
defaults
;;
03)
main menu
esac
}
#######################################################################
applyothertweaks()
{
echo "#Other tweaks" | tee -a /system/build.prop
echo "wifi.supplicant_scan_interval=180" | tee -a /system/build.prop
sed -i 's/ro.config.hw_RemindWifiToPdp=true/ro.config.hw_RemindWifiToPdp=false/g' build.prop
echo "Tweaks applied..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
othertweaks
}
restoreothertweaks()
{
sed -i 's/ro.config.hw_RemindWifiToPdp=false/ro.config.hw_RemindWifiToPdp=true/g' build.prop
sed -i '/#Other tweaks/d' /system/build.prop
sed -i '/wifi.supplicant_scan_interval=180/d' /system/build.prop
echo "default settings restored..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
othertweaks
}
othertweaks()
{
clear
echo "-----------------------------------------------------"
echo "- Other Tweaks -"
echo "-----------------------------------------------------"
echo "01. Apply tweaks"
echo "02. Restore default"
echo
echo "03. Main Menu"
echo "--------------------------"
echo -n "Select an option: "
read applyothertweaks
case $applyothertweaks in
01)
applyothertweaks
;;
02)
restoreothertweaks
;;
03)
main menu
esac
}
#######################################################################
restoredefaultsettings2()
{
clear
rm /system/build.prop
cp /sdcard/build.prop.bak /system
mv /system/build.prop.bak /system/build.prop
rmdir /system/etc/init.d
echo "default settings restored..."
echo "Reboot to apply the new settings..."
read -p "Press ENTER to continue..."
clear
restoredefaultsettings
}
restoredefaultsettings()
{
clear
echo "-----------------------------------------------------"
echo "- Restore Default Settings -"
echo "-----------------------------------------------------"
echo "01. Restore default settings"
echo
echo "02. Main Menu"
echo "--------------------------"
echo -n "Select an option: "
read restoredefaultsettings2
case $restoredefaultsettings2 in
01)
restoredefaultsettings2
;;
02)
main menu
esac
}
#######################################################################
rebootxx()
{
clear
echo "Rebooting..."
reboot
}
exitxx()
{
clear
echo "Bye!"
exit
}
actually it does not work.....there are some errors.
is there someone that can help me????

No scripts - no problems
It's better to be done by editing system files by changing values to that you need.
Waiting for CWM...
Light rom - good rom!
Init.d support is dissabled in stock rom's. You should enable it first.
Sent from my ragelis

bronxitas said:
No scripts - no problems
It's better to be done by editing system files by changing values to that you need.
Waiting for CWM...
Light rom - good rom!
Init.d support is dissabled in stock rom's. You should enable it first.
Sent from my ragelis
Click to expand...
Click to collapse
you do not need init.d support to run this script. you need simply busybox and script manager.

I'm doing all mod's without script if it's possible. Scripts are early stage of mod'ing
Sent from my ragelis

Chenged?
Sent from my U8800-51 using xda premium

i have left this project....

Related

[DEV/TOOL] Automated(ish) T-Mobile Theme Generator

A script I've been working on for a couple of days. Still a work in progress so if you suck less, I could use improvements. It's real simple:
** Put this script in a stock theme template like Cyanbread
1.) Place a source ROM you want to theme for, the base ROM/THROM you're taking images from and a stock theme template (like Cyanbread) and set them in the script at the top.
2.) Modify the script as needed (it's not done as of this writing) and set verbosity out the output, etc.
2.) Run the script and it will do the work
The code should be pretty self explanatory and I'll update it as I go. Just about finished at this point.
Screenshot shows you what it does
Code:
#!/bin/bash
# ------------------------- Set theme name TODO
# themeName=$(cat Android.mk | grep LOCAL_PACKAGE_NAME | sed 's/^LOCAL_PACKAGE_NAME\s:=\s//g')
# read -p "Enter theme name. Enter for default [$themeName]: " REPLY
# REPLY=${REPLY:-$themeName}
# echo "Theme name is $themeName"
# ------------------------- for testing to spare the parameters
SRCROM="ABSOLUTE/PATH/TO/ROOT/OF/SOURCEROM"
BASEROM="ABSOLUTE/PATH/TO/ROOT/OF/BASEROM/YOURE/THEMING/FOR"
# my example:
# SRCROM=~/GBSense2.1/
# BASEROM=~/cm_glacier_full-42/
# running this script from ~/haxzamatic-Templatebread--918313e/
DSTROM=$(pwd)
LOGFILE=$DSTROM/logfile.log
decompile_rom(){
cd $1/app
if [ ! -d $1/app/Browser/ ]; then # need apktool for drawables
#apktool if framework/framework_res.apk
#if [ -e framework/com.htc.resources.apk ]; then
# apktool if framework/com.htc.resources.apk
#fi
for i in `ls $1/app/*.apk`; do echo "Decompiling $i"; apktool d $i; done
cd ../framework
for i in `ls $1/framework/*.apk`; do echo "Decompiling $i"; apktool d $i; done
else
echo "Already decompiled"
fi
}
decompile_rom $SRCROM/system
decompile_rom $BASEROM/system
cd $DSTROM
rm $DSTROM/res/xml/*.xml
echo "" > appendleftovers.tmp
# ------------------------- Log file purge and title
cat <<EOF > $LOGFILE
*********************************************************
Missing files from $SRCROM
*********************************************************
EOF
# ------------------------- Redirections.xml
cat <<EOF > res/xml/redirections.xml
<?xml version="1.0" encoding="utf-8"?>
<theme-redirections
xmlns:android="http://schemas.android.com/apk/res/android"
xmlns:pluto="http://www.w3.org/2001/pluto.html">
EOF
# ------------------------- Android.xml
echo "<resource-redirections>">$DSTROM/res/xml/android.xml
# ------------------------- Main Loop
find "$BASEROM" -type f -name "*.png" | while read fimg; do
# ------------------------- Base Params
FIMGFNAME=$(cat $(dirname $fimg)"/../../apktool.yml" | grep "apkFileName" | sed 's/apkFileName:\s//g' | sed 's/\.apk//g' )
FIMGPNAME=$(cat $(dirname $fimg)"/../../AndroidManifest.xml" | grep "package" | tr " " "\n" | grep package= | cut -d \" -f 2)
if [ $FIMGPNAME = "android" ]; then FIMGPNAME=framework_res; fi
FIMGDNAME=$(echo $(dirname $fimg) | sed "s/\(.*\)\///" )
cd $DSTROM
if [ "$FIMGFNAME" = "framework-res" ] || [ "$FIMGFNAME" = "com.htc.resources" ]; then wp="framework"
else wp="app"
fi
# -------------------------
SRCFILEPATH=$SRCROM/system/$wp/$FIMGFNAME/res/$FIMGDNAME/$DESTFILE
SRCFILENAME=$(echo $(basename $fimg))
DSTFILEPATH=$DSTROM/system/$wp/$FIMGFNAME/res/$FIMGDNAME/$DESTFILE
DSTFILENAME=$(echo $(echo $FIMGPNAME|sed 's/\./_/g')"_$(basename $fimg)")
BSEFILEPATH=$BASEROM/system/$wp/$FIMGFNAME/res/$FIMGDNAME/$DESTFILE
BSEFILENAME=$(echo $(basename $fimg))
# -------------------------
[ -d res ] || mkdir res
[ -d res/$FIMGDNAME ] || mkdir res/$FIMGDNAME
# -------------------------
if [ -f $SRCFILEPATH$SRCFILENAME ]; then
echo "cp $SRCFILEPATH$SRCFILENAME $DSTROM/res/$FIMGDNAME/$DSTFILENAME"
cp $SRCFILEPATH$SRCFILENAME $DSTROM/res/$FIMGDNAME/$DSTFILENAME
# ------------------------- Redirections.xml
thispname=$(cat $(dirname $fimg)"/../../AndroidManifest.xml" | grep "package" | tr " " "\n" | grep package= | cut -d \" -f 2)
if ! grep -iq $thispname $DSTROM/res/xml/redirections.xml ; then
echo "<package-redirections android:name=\"$thispname\" android:minSdkVersion=\"7\" android:resource=\"@xml/$(echo $thispname|sed 's/\./_/g')\" />" >>$DSTROM/res/xml/redirections.xml
fi
# ------------------------- Android.xml
drawrsrc=$(echo $SRCFILENAME | sed 's/\(.*\)\..*/\1/' | sed 's/\.9//g')
drawrdst=$(echo $DSTFILENAME | sed 's/\(.*\)\..*/\1/' | sed 's/\.9//g')
echo "<item name=\"@drawable/$drawrsrc\">@drawable/$drawrdst</item>" >>$DSTROM/res/xml/android.xml
# ------------------------- Package Redirections
drawrfnamenoext=$(echo $drawrsrc | sed 's/\./_/g')
dstfilenameparsed=$(echo $drawrdst | sed 's/\./_/g')
dstredirfname=`echo "$DSTROM/res/xml/$(echo $FIMGPNAME | sed 's/\./_/g').xml"`
if [ ! -f $dstredirfname ]; then
cat <<EOF > $dstredirfname
<?xml version="1.0" encoding="utf-8"?>
<resource-redirections>
EOF
echo "$dstredirfname" >> appendleftovers.tmp
fi
echo "<item name=\"drawable/$drawrfnamenoext\">@drawable/$dstfilenameparsed</item>" >>$dstredirfname
else
echo "[MISSING]: $SRCFILEPATH$SRCFILENAME" >> $LOGFILE
#echo "1.) $fimg" >> $LOGFILE
#echo "2.) $FIMGFNAME" >> $LOGFILE
#echo "3.) $FIMGPNAME" >> $LOGFILE
#echo "4.) $FIMGDNAME" >> $LOGFILE
#echo "5.) $SRCFILEPATH" >> $LOGFILE
#echo "6.) $SRCFILENAME" >> $LOGFILE
#echo "7.) $DSTFILEPATH" >> $LOGFILE
#echo "8.) $DSTFILENAME" >> $LOGFILE
#echo "9.) $BSEFILEPATH" >> $LOGFILE
#echo "10.)$BSEFILENAME" >> $LOGFILE
#echo "------------------------------" >> $LOGFILE
fi
# echo "1.) $fimg"
# echo "2.) $FIMGFNAME"
# echo "3.) $FIMGPNAME"
# echo "4.) $FIMGDNAME"
# echo "5.) $SRCFILEPATH"
# echo "6.) $SRCFILENAME"
# echo "7.) $DSTFILEPATH"
# echo "8.) $DSTFILENAME"
# echo "9.) $BSEFILEPATH"
# echo "10.)$BSEFILENAME"
# echo "------------------------------"
# ------------------------- Example output:
# 1.) ~/cm_glacier_full-42/system/app/Browser/res/drawable-hdpi/fav_icn_background.png
# 2.) Browser
# 3.) com.android.browser
# 4.) drawable-hdpi
# 5.) ~/GBSense2.1/system/app/Browser/res/drawable-hdpi/
# 6.) fav_icn_background.png
# 7.) ~/haxzamatic-Templatebread--918313e/system/app/Browser/res/drawable-hdpi/
# 8.) com_android_browser_fav_icn_background.png
# 9.) ~/cm_glacier_full-42/system/app/Browser/res/drawable-hdpi/
# 10.)fav_icn_background.png
done
# ------------------------- Close out the XML tags
echo "</resource-redirections>">>$DSTROM/res/xml/android.xml
echo "</theme-redirections>">>$DSTROM/res/xml/redirections.xml
cat $DSTROM/appendleftovers.tmp | while read thistmp; do
echo "</resource-redirections>" >> $thistmp
done
rm $DSTROM/appendleftovers.tmp
echo "FINISHED:::::::::::::::::::::::::::::::::::::::::::::::::::::::"
reserved for spam

[MOD][GUIDE]tweak collections for build.prop/init.d

1 i DIDNT made this all tweaks ... Credit goes to their Developers...
I am not responsible for your bricked phone/sd if u pointed on me i will laugh at u
Forever king Tweaks....​
Build.prop tweaks​
1 VM Heapsize; higher the RAM
Code:
dalvik.vm.heapsize=48m
2 Good JPG quality
Code:
ro.media.enc.jpeg.quality=100
3 Render UI with GPU
Code:
debug.sf.hw=1
4 Best Scrolling
Code:
windowsmgr.max_events_per_sec=150
5 Decrease dialing out delay
Code:
ro.telephony.call_ring.delay=0
6 battery Saving
Code:
wifi.supplicant_scan_interval=180
pm.sleep_mode=1
ro.ril.disable.power.collapse=0
7 Disable debugging notify icon on statusbar
Code:
persist.adb.notify=0
8 Increase touch responsiveness
Code:
debug.performance.tuning=1
video.accelerate.hw=1
9 Awesome photo and video recording quality
Code:
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
10 Network tweaks
Code:
Code:
ro.ril.hsxpa=2
ro.ril.gprsclass=10
ro.ril.hep=1
ro.ril.enable.dtm=1
ro.ril.hsdpa.category=10
ro.ril.enable.a53=1
ro.ril.enable.3g.prefix=1
ro.ril.htcmaskw1.bitmask=4294967295
ro.ril.htcmaskw1=14449
ro.ril.hsupa.category=5
11 Internet fast tweaks
Code:
net.tcp.buffersize.default=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.wifi=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.umts=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.gprs=6144,87380,1048576,6144,87380,524288
net.tcp.buffersize.edge=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.hspa=6144,87380,524288,6144,16384,262144
net.tcp.buffersize.lte=524288,1048576,2097152,524288,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,87380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144,87380,1048576
12 Fix some application issues (FC)
ro.kernel.android.checkjni=0
13 Phone will not wake up from hitting the volume rocker
Code:
ro.config.hwfeature_wakeupkey=0
14 Disable boot animation for faster boot
Code:
debug.sf.nobootanimation=1
15 faster streaming
Code:
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
16 Miscellaneous Tweaks for performance
Code:
ro.config.hw_menu_unlockscreen=false
persist.sys.use_dithering=0
persist.sys.purgeable_assets=1
dalvik.vm.dexopt-flags=m=y
ro.mot.eri.losalert.delay=1000
17 Use Google DNS
Code:
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
Init.d tweaks​
(needs ROM with init.d access and busybox, open empty file, insert header "#!/system/bin/sh" and put these there, save in /system/etc/init.d and name it something like tweak1)
1 strict minfree handler tweak
Code:
echo "2048,3072,6144,15360,17920,20480" > /sys/module/lowmemorykiller/parameters/minfree
2 internet speed hack tweaks
Code:
echo "0" > /proc/sys/net/ipv4/tcp_timestamps;
echo "1" > /proc/sys/net/ipv4/tcp_tw_reuse;
echo "1" > /proc/sys/net/ipv4/tcp_sack;
echo "1" > /proc/sys/net/ipv4/tcp_tw_recycle;
echo "1" > /proc/sys/net/ipv4/tcp_window_scaling;
echo "5" > /proc/sys/net/ipv4/tcp_keepalive_probes;
echo "30" > /proc/sys/net/ipv4/tcp_keepalive_intvl;
echo "30" > /proc/sys/net/ipv4/tcp_fin_timeout;
echo "404480" > /proc/sys/net/core/wmem_max;
echo "404480" > /proc/sys/net/core/rmem_max;
echo "256960" > /proc/sys/net/core/rmem_default;
echo "256960" > /proc/sys/net/core/wmem_default;
echo "4096,16384,404480" > /proc/sys/net/ipv4/tcp_wmem;
echo "4096,87380,404480" > /proc/sys/net/ipv4/tcp_rmem;
3 kernel tweaks
Code:
echo "8" > /proc/sys/vm/page-cluster;
echo "64000" > /proc/sys/kernel/msgmni;
echo "64000" > /proc/sys/kernel/msgmax;
echo "10" > /proc/sys/fs/lease-break-time;
echo "500,512000,64,2048" > /proc/sys/kernel/sem;
4 vm management tweaks
Code:
echo "4096" > /proc/sys/vm/min_free_kbytes
echo "0" > /proc/sys/vm/oom_kill_allocating_task;
echo "0" > /proc/sys/vm/panic_on_oom;
echo "0" > /proc/sys/vm/laptop_mode;
echo "0" > /proc/sys/vm/swappiness
echo "50" > /proc/sys/vm/vfs_cache_pressure
echo "90" > /proc/sys/vm/dirty_ratio
echo "70" > /proc/sys/vm/dirty_background_ratio
5 battery tweaks
Code:
echo "500" > /proc/sys/vm/dirty_expire_centisecs
echo "1000" > /proc/sys/vm/dirty_writeback_centisecs
6 removes journalism
Code:
tune2fs -o journal_data_writeback /block/path/to/system
tune2fs -O ^has_journal /block/path/to/system
tune2fs -o journal_data_writeback /block/path/to/cache
tune2fs -O ^has_journal /block/path/to/cache
tune2fs -o journal_data_writeback /block/path/to/data
tune2fs -O ^has_journal /block/path/to/data
7 increases cache size and increases speed
Code:
LOOP=`ls -d /sys/block/loop*`;
RAM=`ls -d /sys/block/ram*`;
MMC=`ls -d /sys/block/mmc*`;
for j in $LOOP $RAM
do
echo "0" > $j/queue/rotational;
echo "2048" > $j/queue/read_ahead_kb;
done
8 SD card speed tweak
Code:
echo "2048" > /sys/devices/virtual/bdi/179:0/read_ahead_kb;
9 Defrags database files
Code:
for i in \
`find /data -iname "*.db"`
do \
sqlite3 $i 'VACUUM;';
done
10 Ondemand governor
Code:
SAMPLING_RATE=$(busybox expr `cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_transition_latency` \* 750 / 1000)
echo 95 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
echo $SAMPLING_RATE > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/sampling_rate
11 Governor Best: Minmax , SavagedZen , Smoothass , Smartass, Interactive
Code:
echo "governor-name-here" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
12 Move dalvik-cache to cache partition
Code:
CACHESIZE=$(df -k /cache | tail -n1 | tr -s ' ' | cut -d ' ' -f2)
if [ $CACHESIZE -gt 80000 ]
then
echo "Large cache detected, moving dalvik-cache to /cache"
if [ ! -d /cache/dalvik-cache ]
then
busybox rm -rf /cache/dalvik-cache /data/dalvik-cache
mkdir /cache/dalvik-cache /data/dalvik-cache
fi
busybox chown 1000:1000 /cache/dalvik-cache
busybox chmod 0771 /cache/dalvik-cache
# bind mount dalvik-cache so we can still boot without the sdcard
busybox mount -o bind /cache/dalvik-cache /data/dalvik-cache
busybox chown 1000:1000 /data/dalvik-cache
busybox chmod 0771 /data/dalvik-cache
else
echo "Small cache detected, dalvik-cache will remain on /data"
fi
13 Disable normalize sleeper
Code:
mount -t debugfs none /sys/kernel/debug
echo NO_NORMALIZED_SLEEPER > /sys/kernel/debug/sched_features
Other tweaks (not build.prop,init.d)​
1 v6 supercharger
Code:
http://forum.xda-developers.com/attachment.php?attachmentid=591730&d=1305000576
Credit- zeppelinrox
2 Use CyanogenMOD's APN list file (fully , for every operator)
Its in system>etc
3 Use uot kitchen for Theming your rom
Code:
http://uot.dakra.lt/
4 Never use Task killer............
please hit thanks and comment if you like this guide....if using in Rom proper credits to this guide!

[Q] Busybox 'sh' Issue Help

I am trying to get CIFS working on my tablet per the instructions on this thread: http://forum.xda-developers.com/showthread.php?t=2003836
I have busybox installed and have created the script below, but whenever I run the script in terminal emulator or Script Manager I get:
not founds/bin/mountscript.sh[2]:
not founds/bin/mountscript.sh[9]:
etc...
I have also tried the busybox ash to no avail.
It seems like variables are not being set. What would cause this?
Code:
#!/system/bin/sh
# Your settings here
USERNAME="user"
PASSWORD="password"
IPADDRESS="10.0.0.84"
SHARE="DriveJ"
MOUNT_POINT="/sdcard/cifs/Drive"
# If you need to change the mount command edit this
MOUNT_CMD="\
mount -t cifs \
\
-o \
user=$USERNAME,\
password=$PASSWORD,\
unc=\\\\\\\\\\\\\\\\$IPADDRESS\\\\\\\\$SHARE \
\
//$IPADDRESS/$SHARE \
$MOUNT_POINT"
COMMANDS="\
insmod /sdcard/mods/md4.ko; \
insmod /sdcard/mods/nls_utf8.ko; \
insmod /sdcard/mods/cifs.ko; \
$MOUNT_CMD
"
# Starting ADB...
PORT=`getprop service.adb.tcp.port`
setprop service.adb.tcp.port 5555
stop adbd
start adbd
adb connect localhost
echo adm connected
# Make sure we only use the first device (sometimes there is more than one)
echo serial being set
SERIAL=`adb devices | head -n2 | tail -n1 | cut -f1`
echo SERIAL=$SERIAL
if [ "$SERIAL" = "" ]; then
echo "ERROR: Could not find ADB device.";
fi
echo Mounting share via adb...
adb -s $SERIAL shell su -c "$COMMANDS"
# If you started adb, then stop it here for security:
adb disconnect localhost
stop adbd
setprop service.adb.tcp.port $PORT
start adbd
RESULT=`mount | grep $MOUNT_POINT`
if [ "$RESULT" = "" ]; then
echo "Mounting failed..."
else
echo "Mounting sucess!"
fi
echo Done... You may close this script window.

Franco dev tweaks, very old but very good

Hello I found this flashable tweak from franco dev team, 2013 , but they are working good just sharing then. Credits to the awesome franco and his dev team.
Just flash it in recovery, to remove them just dirty flash your current ROM, enjoy.
875mntsettings
Code:
#!/system/bin/sh
# chmod -R 755 /system/etc/init.d
# 12-May-2013 by Franco's Dev Team
# malaroth, osm0sis, joaquinf, The Gingerbread Man, pkgnex, Khrushy, shreddintyres
# sysfs+sdcard tweaks
busybox mount -o remount,nosuid,nodev,noatime,nodiratime -t auto /;
busybox mount -o remount,nosuid,nodev,noatime,nodiratime -t auto /proc;
busybox mount -o remount,nosuid,nodev,noatime,nodiratime -t auto /sys;
busybox mount -o remount,nosuid,nodev,noatime,nodiratime -t auto /sys/kernel/debug;
busybox mount -o remount,nosuid,nodev,noatime,nodiratime -t auto /mnt/shell/emulated;
for i in /storage/emulated/*; do
busybox mount -o remount,nosuid,nodev,noatime,nodiratime -t auto $i;
busybox mount -o remount,nosuid,nodev,noatime,nodiratime -t auto $i/Android/obb;
done;
# partition tweaks
busybox mount -o remount,nosuid,nodev,noatime,nodiratime,barrier=0,noauto_da_alloc,discard -t auto /data;
busybox mount -o remount,nosuid,nodev,noatime,nodiratime,barrier=0,noauto_da_alloc,discard -t auto /cache;
busybox mount -o remount,nodev,noatime,nodiratime,barrier=0,noauto_da_alloc,discard -t auto /system;
925vmsettings
Code:
#!/system/bin/sh
# chmod -R 755 /system/etc/init.d
# 26-Jun-2013 by Franco's Dev Team
# malaroth, osm0sis, joaquinf, The Gingerbread Man, pkgnex, Khrushy, shreddintyres
# disable sysctl.conf to prevent ROM interference
if [ -e /system/etc/sysctl.conf ]; then
mount -o remount,rw /system;
mv /system/etc/sysctl.conf /system/etc/sysctl.conf.fkbak;
mount -o remount,ro /system;
fi;
# vm tweaks
echo 5 > /proc/sys/vm/dirty_background_ratio;
echo 200 > /proc/sys/vm/dirty_expire_centisecs;
echo 20 > /proc/sys/vm/dirty_ratio;
echo 500 > /proc/sys/vm/dirty_writeback_centisecs;
echo 2884 > /proc/sys/vm/min_free_kbytes;
echo 4 > /proc/sys/vm/min_free_order_shift;
echo 3 > /proc/sys/vm/page-cluster;
echo 0 > /proc/sys/vm/swappiness;
echo 100 > /proc/sys/vm/vfs_cache_pressure;
# lmk tweaks
minfree=6144,8192,12288,16384,24576,40960;
lmk=/sys/module/lowmemorykiller/parameters/minfree;
minboot=`cat $lmk`;
while sleep 1; do
if [ `cat $lmk` != $minboot ]; then
[ `cat $lmk` != $minfree ] && echo $minfree > $lmk || exit;
fi;
done&
# fs tweaks
echo 10 > /proc/sys/fs/lease-break-time;
# entropy tweaks
echo 128 > /proc/sys/kernel/random/read_wakeup_threshold;
echo 256 > /proc/sys/kernel/random/write_wakeup_threshold;
# tcp tweaks
echo "westwood" > /proc/sys/net/ipv4/tcp_congestion_control;
950iosettings
Code:
#!/system/bin/sh
# chmod -R 755 /system/etc/init.d
# 11-Jun-2013 by Franco's Dev Team
# malaroth, osm0sis, joaquinf, The Gingerbread Man, pkgnex, Khrushy, shreddintyres
# disable sysctl.conf to prevent ROM interference
if [ -e /system/etc/sysctl.conf ]; then
mount -o remount,rw /system;
mv /system/etc/sysctl.conf /system/etc/sysctl.conf.fkbak;
mount -o remount,ro /system;
fi;
# general queue tweaks
for i in /sys/block/*/queue; do
echo 512 > $i/nr_requests;
echo 512 > $i/read_ahead_kb;
echo 2 > $i/rq_affinity;
echo 0 > $i/nomerges;
echo 0 > $i/add_random;
echo 0 > $i/rotational;
done;
# override scheduler defaults with tweaked values
scheduler=reset;
while sleep 1; do
current=`cut -d\[ -f2 /sys/block/mmcblk0/queue/scheduler | cut -d\] -f1`;
if [ $scheduler != $current ]; then
scheduler=$current;
if [ $scheduler == "deadline" ]; then
# deadline tweaks
echo 250 > /sys/block/mmcblk0/queue/iosched/read_expire;
echo 2500 > /sys/block/mmcblk0/queue/iosched/write_expire;
echo 1 > /sys/block/mmcblk0/queue/iosched/writes_starved;
echo 1 > /sys/block/mmcblk0/queue/iosched/front_merges;
echo 8 > /sys/block/mmcblk0/queue/iosched/fifo_batch;
elif [ $scheduler == "row" ]; then
# row tweaks
echo 100 > /sys/block/mmcblk0/queue/iosched/hp_read_quantum;
echo 75 > /sys/block/mmcblk0/queue/iosched/rp_read_quantum;
echo 5 > /sys/block/mmcblk0/queue/iosched/hp_swrite_quantum;
echo 4 > /sys/block/mmcblk0/queue/iosched/rp_swrite_quantum;
echo 4 > /sys/block/mmcblk0/queue/iosched/rp_write_quantum;
echo 3 > /sys/block/mmcblk0/queue/iosched/lp_read_quantum;
echo 12 > /sys/block/mmcblk0/queue/iosched/lp_swrite_quantum;
echo 10 > /sys/block/mmcblk0/queue/iosched/read_idle;
echo 25 > /sys/block/mmcblk0/queue/iosched/read_idle_freq;
## N4 and N10 row adds lsl and rsl, which were hardcoded previously
echo 10000 > /sys/block/mmcblk0/queue/iosched/low_starv_limit;
echo 5000 > /sys/block/mmcblk0/queue/iosched/reg_starv_limit;
## N4 and N10 have a new version of row with corrected entry for lsq and renamed ri and rif
[ `cat /sys/block/mmcblk0/queue/iosched/lp_swrite_quantum` != "2" ] && echo 2 > /sys/block/mmcblk0/queue/iosched/lp_swrite_quantum;
echo 10 > /sys/block/mmcblk0/queue/iosched/rd_idle_data;
echo 25 > /sys/block/mmcblk0/queue/iosched/rd_idle_data_freq;
elif [ $scheduler == "cfq" ]; then
# cfq tweaks
echo 4 > /sys/block/mmcblk0/queue/iosched/quantum;
echo 80 > /sys/block/mmcblk0/queue/iosched/fifo_expire_sync;
echo 330 > /sys/block/mmcblk0/queue/iosched/fifo_expire_async;
echo 12582912 > /sys/block/mmcblk0/queue/iosched/back_seek_max;
echo 1 > /sys/block/mmcblk0/queue/iosched/back_seek_penalty;
echo 60 > /sys/block/mmcblk0/queue/iosched/slice_sync;
echo 50 > /sys/block/mmcblk0/queue/iosched/slice_async;
echo 2 > /sys/block/mmcblk0/queue/iosched/slice_async_rq;
echo 0 > /sys/block/mmcblk0/queue/iosched/slice_idle;
echo 0 > /sys/block/mmcblk0/queue/iosched/group_idle;
echo 1 > /sys/block/mmcblk0/queue/iosched/low_latency;
## N4 and N10 cfq adds tl, which was hardcoded previously
echo 300 > /sys/block/mmcblk0/queue/iosched/target_latency;
fi;
fi;
# loop forever independently
done&
Flash an unidentified 3-year-old zip? Thank you, but I'll pass...
fedef12evo said:
Hello I found this flashable tweak from franco dev team, 2013 , but they are working good just sharing then. Credits to the awesome franco and his dev team.
Just flash it in recovery, to remove them just dirty flash your current ROM, enjoy.
Click to expand...
Click to collapse
Why should anyone flash this?
Can you also post a Ice Cream Sandwich rom to go with it
fedef12evo said:
Hello I found this flashable tweak from franco dev team, 2013 , but they are working good just sharing then. Credits to the awesome franco and his dev team.
Just flash it in recovery, to remove them just dirty flash your current ROM, enjoy.
Click to expand...
Click to collapse
Don't you think you should at least explain exactly what these tweaks do?!
download the zip with pc, then open it and read every of 3 tweak what do, im gonna post it for you
first off, what do these "tweaks" do do you know? as nd Franco isnt a dev team, its an individual person.
simms22 said:
first off, what do these "tweaks" do do you know? as nd Franco isnt a dev team, its an individual person.
Click to expand...
Click to collapse
Read them tweak, back in thr day franco had a team
fedef12evo said:
Read them tweak, back in thr day franco had a team
Click to expand...
Click to collapse
no, he doesnt. he has people test out his kernels, but he IS alone. i know, im friends with him. i dont need to read the tweaks, you posted them here and you have to post what they do. if not, your thread will kust get closed down.
Thread closed. No-one with any sense would try this considering absolutely no info on resultant effects has been given, and the sheer age of the "tweaks".
Anyone wishing to try does so bearing the above caveat in mind.

[NO ROOT] Amazon Fire TV Setup Tool [ Kills Amazon Launcher + XFINITY STREAM 2017 ]

Hello everyone!
I have had to set up quite a few of these sticks, so I wanted to start a little development tool to automate the process.
This is just a stupid bash script but it will make your TV usable without ads by installing Launcher Hijack 3 and configuring it for you and X43Stream. If anyone has requests I will work on this further. Leanback will not work, someone needs to mod it.
Source
PHP:
echo "Please ensure you are already connected and adb is installed correctly."
sleep 1
echo "Installing Launcher Hijack 3 (LH3).."
adb install "LauncherHijack3.apk"
echo "Installing TV Launcher.."
adb install "TVLauncher.apk"
echo "Installing XFinity Stream latest July 2017.."
adb install "X43Stream.apk"
echo "Opening LH3.."
adb shell am start -n com.baronkiko.launcherhijack/.MainActivity
sleep 3
echo "Selecting new launcher.."
adb shell input keyevent 23
sleep 1
adb shell input keyevent 23
sleep 1
adb shell am start -n com.awe.dev.pro.tv/.Launcher
echo "Enjoy, try out the home button!"
echo "It may not work every time, press again, work in progress :)"
or download it:
https://www.sendspace.com/file/epob8z
Thank you so much, I can't root my fire TV and I'm sick and tired of the Amazon launcher. I will be setting it up tomorrow. Will post back with results
Nvmd, finally got it.
This can be ran as a straight native Windows batch without having to install Bash support. Replace "sleep 1" with "timeout -t 1"
(or you can just paste ^^ into a properly connected ADB console with apks in the right places, will fail on "sleep 1" but it worked for me)
EDIT: Also works fine with Tvlauncher 2 rename the apk to tvlauncher like in the package and thanks OP! Home button seems to work fine for me!
installation help
Please help me install this fire tv setup tool i have a newer fire tv and dont know what to do with the download. i am not a pro but can follow directions and i hate the fire tv launcher.
Please help
Thank You
1. open a command prompt to the directory that contains ADB and put everything from the download in the same folder.
2. in the console window "adb connect xxx.xxx.xxx.xxx" where the x's are your IP of your FireTV\Stick (no quotes)
3. cut\paste the script from above into the console (cmd) window and run it...
4. it will error on "sleep 1" but continue and finish fine. If you want to correct the script for Windows batch scripting, replace "sleep 1" with "timeout -t 1" and save it as a .bat file.
I don't understand why this was only posted as a bash script (it is the best non-root hack there is). Windows doesn't support bash out of the box, and 99 percent of the people who download the script wont know what to do with it. BTW this works, and even works with other launchers. I use Tv launcher 2 which supports (its own special) widgets. No root. Never see the amazon launcher. Block updates, and do it asap.
EDIT: Fire Stick 2 fyi
So do we need to use the tvlauncher apk for the xfinity app to work?
What is the tv launcher? Same UI as the newer aftv ui (-ads?)
Only reason I don't just jump in and test it is Im not 100%sure how to undo it. Just uninstall the apks?
Thanks
UPDATE-I just went for it and it works....sort of.
It immediately launches the new UI but after setting it up, when I hit the home button it just returns to the normal AFTV launcher.
***This is actually preferable to me since all I really wanted was the Xfinity stream app to work. I tried just extracting the apk and installing it on my other Fire TV but it said incompatible.
First I would like to say thank you for a great tool to use on non rooted devices, I love it.
One thing i noticed is, that most people still won't know what to do with this tool so i will try and help explain better
-download adb and install it, if you haven't already
-download the file OP has at top of post
-extract the zip file
-copy and paste the code at top of OP into NOTEPAD
-change every spot that says "Sleep 1", erase that and copy and paste this there instead "timeout -t 1
-click file at the top left in notepad and click save as name it FireTV.bat
-goto your adb folder of install, usually C:\Program Files (x86)
-erase the "sh file" in the file you downloaded and extracted from the OP earlier
-put the new FireTV.bat you just made in that folder you just erased the "sh file" from
-now put all of those files into the adb folder you just opened and found,"launcher hijack apk, TVLauncher apk, x43Stream apk and your FireTV.bat files."
-hold on shift and right click with your mouse to open and command promnt here, if that doesn't show powershell works as well, it depends on your windows version.
-type "adb connect 192.168.1.8 or whatever you ip is for your FIreTV, this is found by going to settings, device, about and scroll down to network and it will list your IP
-if right it will say connected to device
-now simply left click hold and drag the FireTV.bat file you just created into the command promt and press enter
-that is it should work just fine.
I usually don't do this so I hope I helped a little bit.
Ok, just tried this, works pretty flawless. Sometimes you have to press home a couple times to get it to work(but that's no big deal). One thing i did notice though, if you have appstarter/firestarter (forget its name) it launches it instead, simple fix is to uninstall it then run the .bat again.
Does this work on firestick as well? Would hate to mess something up lol.
Edit.
For anyone wondering, no this does not work on firestick, it will install the apps but thats it.
TimmyP said:
This can be ran as a straight native Windows batch without having to install Bash support. Replace "sleep 1" with "timeout -t 1"
(or you can just paste ^^ into a properly connected ADB console with apks in the right places, will fail on "sleep 1" but it worked for me)
EDIT: Also works fine with Tvlauncher 2 rename the apk to tvlauncher like in the package and thanks OP! Home button seems to work fine for me!
Click to expand...
Click to collapse
Do you have a safe download link for the Tvlauncher 2 apk? Also so all I do is change Tvlauncher in the script to Tvlauncher2 and replace the apk in the download file?
Would it be possible to add a app killer similar to firestarter when you press the menu key, even if just to launch system default app manager? If it had that i think it'd be perfect.
Can anyone add screenshots or video of what this looks like when completed?
enigma7820 said:
First I would like to say thank you for a great tool to use on non rooted devices, I love it.
One thing i noticed is, that most people still won't know what to do with this tool so i will try and help explain better
-download adb and install it, if you haven't already
-download the file OP has at top of post
-extract the zip file
-copy and paste the code at top of OP into NOTEPAD
-change every spot that says "Sleep 1", erase that and copy and paste this there instead "timeout -t 1
-click file at the top left in notepad and click save as name it FireTV.bat
-goto your adb folder of install, usually C:\Program Files (x86)
-erase the "sh file" in the file you downloaded and extracted from the OP earlier
-put the new FireTV.bat you just made in that folder you just erased the "sh file" from
-now put all of those files into the adb folder you just opened and found,"launcher hijack apk, TVLauncher apk, x43Stream apk and your FireTV.bat files."
-hold on shift and right click with your mouse to open and command promnt here, if that doesn't show powershell works as well, it depends on your windows version.
-type "adb connect 192.168.1.8 or whatever you ip is for your FIreTV, this is found by going to settings, device, about and scroll down to network and it will list your IP
-if right it will say connected to device
-now simply left click hold and drag the FireTV.bat file you just created into the command promt and press enter
-that is it should work just fine.
I usually don't do this so I hope I helped a little bit.
Click to expand...
Click to collapse
Very helpful but I had to correct a few lines:
-There was a "Sleep 3" I had to change to "timeout -t 3"
-In powershell I had to type ".\adb connect 192.168.xx.xxx" to get it to work.
-The left click hold and drag the FireTV.bat file didn't do anything so I just typed "FireTV.bat" on the command prompt and it ran.
Thanks for your help.
nyln said:
Hello everyone!
I have had to set up quite a few of these sticks, so I wanted to start a little development tool to automate the process.
This is just a stupid bash script but it will make your TV usable without ads by installing Launcher Hijack 3 and configuring it for you and X43Stream. If anyone has requests I will work on this further. Leanback will not work, someone needs to mod it.
Source
PHP:
echo "Please ensure you are already connected and adb is installed correctly."
sleep 1
echo "Installing Launcher Hijack 3 (LH3).."
adb install "LauncherHijack3.apk"
echo "Installing TV Launcher.."
adb install "TVLauncher.apk"
echo "Installing XFinity Stream latest July 2017.."
adb install "X43Stream.apk"
echo "Opening LH3.."
adb shell am start -n com.baronkiko.launcherhijack/.MainActivity
sleep 3
echo "Selecting new launcher.."
adb shell input keyevent 23
sleep 1
adb shell input keyevent 23
sleep 1
adb shell am start -n com.awe.dev.pro.tv/.Launcher
echo "Enjoy, try out the home button!"
echo "It may not work every time, press again, work in progress :)"
or download it:
https://www.sendspace.com/file/epob8z
Click to expand...
Click to collapse
The sendspace link is very slow,
Here is a direct download link: https://ipfs.works/ipfs/QmXnYYH5iSnsa4DQdQED8RapgM4pA7v6EV3bzfGdoR9sMp/Amazon_Fire_TV_Setup_Tool.zip
md5sum: 8847a2b99afee549e2f5f973d86bfa51
Thread cleaned. XDA-Developers is a site for all, including those whose main languages and experience levels may vary.
If you're unwilling or unable to treat people with the civility we all deserve, kindly consider a break away from the keyboard.
Thank you all for your cooperation.
Sorry Somehow my post posted twice! not sure how to delete it so i'm editing this one
nyln said:
Hello everyone!
I have had to set up quite a few of these sticks, so I wanted to start a little development tool to automate the process.
This is just a stupid bash script but it will make your TV usable without ads by installing Launcher Hijack 3 and configuring it for you and X43Stream. If anyone has requests I will work on this further. Leanback will not work, someone needs to mod it.
Source
PHP:
echo "Please ensure you are already connected and adb is installed correctly."
sleep 1
echo "Installing Launcher Hijack 3 (LH3).."
adb install "LauncherHijack3.apk"
echo "Installing TV Launcher.."
adb install "TVLauncher.apk"
echo "Installing XFinity Stream latest July 2017.."
adb install "X43Stream.apk"
echo "Opening LH3.."
adb shell am start -n com.baronkiko.launcherhijack/.MainActivity
sleep 3
echo "Selecting new launcher.."
adb shell input keyevent 23
sleep 1
adb shell input keyevent 23
sleep 1
adb shell am start -n com.awe.dev.pro.tv/.Launcher
echo "Enjoy, try out the home button!"
echo "It may not work every time, press again, work in progress :)"
or download it:
https://www.sendspace.com/file/epob8z
Click to expand...
Click to collapse
I'm assuming this is using adb tcpip? I have a very Epic setup of bash scripts for setting up Fire Devices. I made it for my brother.
Anyways here is the chunk of code will grab your current connected networks and provide a list to choose from. Example if you have to it would show: 192.168.0.1 & 10.0.0.1 . When you choose one it will scan your network for Fire Devices with port 5555 open and present you with a list of found devices. You can choose to connect to a specific one or connect to them all.
There is a lot of extra code in this that needs to be removed. Right now i dont have the time to clean it up so hopefully you can! Also this chunk of code requires nmap to be installed. FYI This runs on Kali Linux but should work on other distro's but you may have to account for sudo usage.
Code:
function NetworkScan() {
function GetNetworks() {
echo -e "\n\n"
cd $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g") &>/dev/null
TotalConnectedDevices="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | sort | uniq | wc -l)"
ConnectedDevices="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | grep -iv "offline" | sort | uniq | wc -l)"
ConnectedOffline="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | grep -i "offline" | sort | uniq | wc -l)"
prompt="$(echo -e "\e[96m][NT3L][G3NC][ NetworkPicker Menu:\e[0m")"
IP=$(for file in $(ifconfig | egrep -o "wlan.:|eth.:" | cut -d" " -f1 | sed -e "s/://g"); do ip addr show $file | grep -w inet | cut -d"/" -f1 |sed -e 's/\<inet\>//g' -e 's/^[ \t]*//' | grep "[1-9][0-9]" | cut -d'.' -f1,2,3; done | sort | uniq)
options=( $(for file in $(echo "$IP"); do echo "$file.1/24"; done | sort | uniq | xargs -0) )
echo -e " $prompt $TotalConnectedDevices "
echo -e " [\e[96m$ConnectedOffline\e[0m]----------------------------------[\e[96m$ConnectedDevices\e[0m]"
echo -e " $RemoteKodi "
echo -e ""
select opt in "${options[@]}" "All" ; do
if [[ $REPLY = 'QUIT' || $REPLY = 'quit' ]] ; then
exit 1
elif (( REPLY == 1 + ${#options[@]} )) ; then
clear
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif (( REPLY > 0 && REPLY <= ${#options[@]} )) ; then
clear
NetworkScan "$opt"
else
echo -e "Invalid option. Try another one."
sleep 2 &>/dev/null
clear
StartMenu
fi
done
}
Args=( $(for file in $(echo "[email protected]"); do echo "$file" ; done | xargs -0) )
ArgsCount=${#Args[@]}
if [ "$ArgsCount" = '0' ]
then
GetNetworks
else
echo "${Args[@]}" | grep "\.1/24" &>/dev/null
if [ "$?" = '0' ]
then
options=( $(for file in $(echo ${Args[@]}); do nmap -p 5555 $file -oG - | grep "open" | cut -d" " -f2 ; done | xargs -0) )
else
options=( $(for file in $(echo ${Args[@]}); do echo $file ; done | xargs -0) )
fi
echo -e "\n\n"
cd $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g") &>/dev/null
TotalConnectedDevices="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | sort | uniq | wc -l)"
ConnectedDevices="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | grep -iv "offline" | sort | uniq | wc -l)"
ConnectedOffline="$(adb devices 2>/dev/null | grep -v "List" | grep -v "^$" | grep -iv "daemon" | grep -i "offline" | sort | uniq | wc -l)"
prompt="$(echo -e "\e[96m][NT3L][G3NC][ NetworkScan Menu:\e[0m")"
echo -e " $prompt $TotalConnectedDevices "
echo -e " [\e[96m$ConnectedOffline\e[0m]----------------------------------[\e[96m$ConnectedDevices\e[0m]"
echo -e " $RemoteKodi "
echo -e ""
select opt in "${options[@]}" "All" "Pick Network" ; do
if [[ $REPLY = 'QUIT' || $REPLY = 'quit' ]] ; then
exit 1
elif [[ $REPLY = 'KILL' || $REPLY = 'kill' ]] ; then
clear
killall adb gnome-terminal xterm terminator &>/dev/null
exit 1
elif [[ $REPLY = 'LIST' || $REPLY = 'list' ]] ; then
clear
$(declare -f ListDevicesConnected)
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'REFRESH' || $REPLY = 'refresh' || $REPLY = 'RELOAD' || $REPLY = 'reload' ]] ; then
clear
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'FireStarter' || $REPLY = 'fIREsTARTER' ]] ; then
clear
xterm -e $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g")/Scriptz/FireStarterUP.sh &
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'APK' || $REPLY = 'apk' ]] ; then
clear
for apk in $(find $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g")/AApushApk/SendAPK -type f -iname "*.apk"); do adb install "$apk" ; done
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'REBOOT' || $REPLY = 'reboot' ]] ; then
clear
$(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g")/Scriptz/RebootDevices.sh
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'stop' || $REPLY = 'STOP' ]] ; then
clear
adb kill-server
adb start-server
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'HELP' || $REPLY = 'help' ]] ; then
clear
echo -e "$(HelpMe)"
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'USBCHECK' || $REPLY = 'usbcheck' || $REPLY = 'usb' || $REPLY = 'USB' ]] ; then
terminator -e dmesg -wH &
clear
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'html' || $REPLY = 'HTML' ]] ; then
clear
xterm -e $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g")/Scriptz/GenerateHTML.sh
iceweasel $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2 | sed -e "s:/$::g")/ScreenShots/index.html &
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif [[ $REPLY = 'BACK' || $REPLY = 'back' || $REPLY = 'Menu' || $REPLY = 'menu' || $REPLY = 'MENU' ]] ; then
clear
StartMenu
elif [[ $REPLY = 'UpdateKodi' || $REPLY = 'uPDATEkODI' ]] ; then
clear
KodiAPKMenu
elif (( REPLY == 1 + ${#options[@]} )) ; then
clear
for file in $(echo ${options[@]}); do adb connect "$file" ; done
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
elif (( REPLY == 2 + ${#options[@]} )) ; then
clear
GetNetworks
elif (( REPLY > 0 && REPLY <= ${#options[@]} )) ; then
clear
adb connect "$opt"
clear
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
else
echo -e "Invalid option. Try another one."
sleep 2 &>/dev/null
clear
NetworkScan $(for file in $(echo ${options[@]}); do echo -n "$file " ; done)
fi
done
fi
}
The chunk of code above is setup to be a Menu in the terminal. NetworkScan is just one of the Menu options. If you make a base Menu setup with options: "Network Scan" , "Install APKs", "Change Launcher" etc. you could have "Change Launcher" launch a script that would have something like this in it.
Code:
for DroidID in $(adb devices 2>/dev/null | grep -v "List" | grep -v "daemon" | grep -v "^$" | cut -f1)
do
xterm -e $(grep 'MainPath=' $HOME/.][NT3L][ST][CKS/main.conf | cut -d'=' -f2)/Scriptz/Clean.sh "$DroidID" &
done
The above script gets all connected devices and then loops through their serial starting another script while passing the serial as a parameter. You would need to make sure the script that gets ran applies the parameter as the serial. Example below is used to remove all 3rd party apps installed, data and then uninstall it
Code:
#!/bin/bash
SerialNum="$1"
IsDeviceOffline="$(adb -s "$1" devices | grep "$1" | cut -f2)"
function AutoClean() {
echo -e ""
echo -e "Clearing App Data And Removing APKs"
for file in $(adb -s "$1" shell pm list packages -3 | cut -d':' -f2)
do
adb -s "$1" shell pm clear "$(echo "$file" | tr -d '\r')"
adb -s "$1" uninstall "$(echo "$file" | tr -d '\r' )"
done
echo -e ""
read -p "Finished Auto Cleaning"
}
echo -e "$IsDeviceOffline" | grep -i "offline" &>/dev/null
if [ "$?" != '0' ]
then
AutoClean "$SerialNum"
else
echo -e "Device:"$SerialNum" Is Offline!"
read -p "Exiting Script"
fi
nyln said:
Hello everyone!
I have had to set up quite a few of these sticks, so I wanted to start a little development tool to automate the process.
This is just a stupid bash script but it will make your TV usable without ads by installing Launcher Hijack 3 and configuring it for you and X43Stream. If anyone has requests I will work on this further. Leanback will not work, someone needs to mod it.
Source
PHP:
echo "Please ensure you are already connected and adb is installed correctly."
sleep 1
echo "Installing Launcher Hijack 3 (LH3).."
adb install "LauncherHijack3.apk"
echo "Installing TV Launcher.."
adb install "TVLauncher.apk"
echo "Installing XFinity Stream latest July 2017.."
adb install "X43Stream.apk"
echo "Opening LH3.."
adb shell am start -n com.baronkiko.launcherhijack/.MainActivity
sleep 3
echo "Selecting new launcher.."
adb shell input keyevent 23
sleep 1
adb shell input keyevent 23
sleep 1
adb shell am start -n com.awe.dev.pro.tv/.Launcher
echo "Enjoy, try out the home button!"
echo "It may not work every time, press again, work in progress :)"
Thanks for this. I use a slightly edited version of this on all of my firesticks now.
Click to expand...
Click to collapse
Anyone knows if is there a new update for the xfinity app for the firetv?
zeroth said:
Anyone knows if is there a new update for the xfinity app for the firetv?
Click to expand...
Click to collapse
Bump

Categories

Resources