Database Users

CM7 Help

So here is my situation
I got my NC in February and rooted it before updating to B&N 1.1
I would like to get it running CM7 but also be Dual Boot.
How should i go about this, do i need to Erase deregister and reroot? im sure this has been asked before somewhere in the back pages of this forum, any help or even a link to help would be great. i also don't want to lose my data.
Thanks

If you just want to try something new, use Rom Manager from the Market to backup your system to your sdcard. Then you can install CM7 using Rom Manager and restore what you have now when done. Dual booting is a little harder, what I used to do was make a bootable sdcard. Dualboot Phiremod / Honeycomb Image for SDcard is a good way to go, here is a link http://forum.xda-developers.com/showthread.php?t=1045018

[Q] CWM problem

Good day all. I recently bought a Nook Color. I'm running CM7.0.2 along with gapps 20110613 from a 16gb SanDisk class 4 SD. When set up the apps (after enabling wifi) I got an error, due to the fact that my sucky router dropped the signal. As a result of this I was not able to download gmail, google maps, etc. My android market runs perfectly but I wanted to flash gapps so as to download gmail and the others. I went into ROM manager and updated to the latest CWM. However, no matter what I do I can't but into recovery. I tried n+power button, reboot into recovery from the power button menu, and from within ROM manager. All no go...it just booted into CM7, so I removed the SD card to boot into stock Nook 1.2 software. When I did this it brought me to the CWM recovery menu (SD card not in). Of course I could not select anything on the menu. Put back in the SD while still in the menu to try select an option but nothing. Shut it down by holding the power button and booted it back up and it went str8 into CM7. Shut down took out SD and it booted into stock Nook 1.2 software. What am I doing wrong guys? I'm trying to flash the overclock kernel and reflash gapps. THANKS

Could the reason gmail, youtube, googlemaps didn't install on setup be due to the fact that I'm not in the USA? If so I'd still like to know what the problem is so I can flash the overclock kernel.

No one has any idea? I know one option is to backup and redo everything, but I'd really like some troubleshooting ideas before.

Did you use the 1.3 image from verygreens thread? If so the old 7.0.* stables are not supported. You will need to back up and redo it either with the old image or a new CM7 version.
---
- Sent from my LG Optimus V using Tapatalk

Yea I used the 1.3 in the thread with 7.0.2. What version cm7 would I need to use with the 1.3? 7.0.3 or a nightly,? Where would I be able to find an older image to work with 7.0.2 and what version of the image should it be?

The 1.3 image won't work with any 7.0.* versions. You should upgrade to either a recent nightly or the 7.1.0 RC. You could find an older image somewhere but there isn't much of a point as you would have to redo it all anyway so why not upgrade? Plus your battery life will improve by a lot as 7.1 RC and the nightlys have deep sleep.
---
- Sent from my LG Optimus V using Tapatalk

As I said many times to newbie who runs CM7 off uSD that do not or should not mess up with ROM Manager. In fact, there are members also confirm that if booting off uSD, ROM Manager has no effect.
Based on what you, OP, described, you had flashed the CwM into the internal memory.
Keep your fingers crossed as I do hope you didn't screw up anything else.
Anyway, using verygreen's 1.3 image along with the latest nightly-built CM7 and the latest 06132001 gapps and boot it off uSD again. You should be fine.
Before that, fix your home wireless network first.

I decided to just go with 7.1RC1 since I wanted the better battery life. Is there a way to check about the CWM on the internal and how would I go about removing it if I did? I ask for warranty purposes ofcourse since I opted for the 2 year extended one. Also to flash upgrades and such, since you don't recomend using ROM manager then how should I go about doing it (i.e. overclocking kernel)?

dna59 said:
I decided to just go with 7.1RC1 since I wanted the better battery life. Is there a way to check about the CWM on the internal and how would I go about removing it if I did? I ask for warranty purposes ofcourse since I opted for the 2 year extended one. Also to flash upgrades and such, since you don't recomend using ROM manager then how should I go about doing it (i.e. overclocking kernel)?
Click to expand...
Click to collapse
1. I never have any issue related to battery with any nightly build that I've ever used. I am currently having the nb153 and it is fantastic.
2. Check CwM and how to remove off the internal memory? I don't know any quick way except restoring the original ROM.
Again, for warranty purposes, strongly suggest running off uSD
3. Updating by loading/copying/dragging the updated files onto the root folder (aka "boot" partition), then TRY loading into Recovery by:
a. combination of power/N buttons if you have skill or
b. let it boot normally into CM7, wait until completely loaded, then reboot and select "recovery" option. Keep yr fingers crossed. This is an easy method but if it doesn't work then option a is the only choice.

Sorry the battery issue was as compared to the current CM7 stable not the nightly. I got everything installed so far besides the overclock kernel. So I will try your recommendation for booting into recovery not using ROM manager.

You don't flash anything when running off an sd card you just boot into recovery and then reboot. Easiest way to get the overclock kernel would be to just upgrade to the latest nightly.
---
- Sent from my LG Optimus V using Tapatalk

New to the Nook Color

Hi I just got a nook color for 160 bucks off Craigslist. It is rooted running cyanogen mod 7 encore 7.0.2. I was wondering how to get miui ubuntu and bluetooth working. Also I'm new to this so if there is anything else you guys recommend it'd be great to hear about. Also when I first opened up rom manager it says I need to install a recovery and I accidentally installed a one for a different device and now I can't access the recovery and when I click on flash recovery and I click on nook color it says an error occurred while attempting to run privileged commands
Sent from my HTC Sensation 4G using XDA App

I dont have the links off hand, but you should be able to create a micro SD card with CWR on it and boot into it. From there you should be able to modify and reload everything onto the NC.
Essentially start from scratch. I recommend ditching 7.0.2 and using at least 7.1RC or one of the newer nightly builds. 7.0.2 doesn't have deep sleep and there have been a lot of fixes made in newer builds.

Welcome!
I would also recommend just starting from scratch, unless there is anything on the NC now that you desperately wanted to keep. Who knows what the previous owner did to it. I've personally installed CM7 (just go with the latest nightly) to emmc using these steps:
http://forum.xda-developers.com/showpost.php?p=11452450&postcount=19
If you want to go the SD card route, follow :
http://forum.xda-developers.com/showthread.php?t=1000957
There are steps in each thread about updating to a newer CM7 release. Bluetooth "just works" in any recent nightly. You can enable it in the networks settings panel. If you want to keep what you have, you might try going into the Applications settings and clearing data for Rom Manager (not 100% sure how to undo that setting). There are threads in the Android Development subforum for MUIU and Ubuntu, but [and I'm partial here], CM7 seems to be far and away the better option.

Just a side note here. Since I run bluetooth and host mode daily, I check out each nightly before playing too much. N 161 and 162 have comments about BT issues. If you really need BT, I have found 160 is rock solid.
Sent from my NookColor using Tapatalk

thanks much!

[Q] Problem with MIUI

My MIUI rom is MIUI-108050 version and though it's pretty nice when working, I can't enter the Market without it crashing and I can't get it to enter Bootloader or Recovery. Titanium Backup nor Clockwork Recovery nor Rom Manager are available - for some reason they are gone or not accessible. Titanium Backup shows in my App Manager, but it doesn't show in App tray. So my Nook Color is stuck with a barely working MIUI Rom. Does anyone have a suggestion for getting to a different Rom or for getting back to stock?

I briefly tried MIUI and had pretty much the same problem. I read somehwere else that you have to do a complete wipe when you first install it. I haven't bothered going back to confirm if that works, but it might be worth a shot.

Make a new SD card with CWM image on it. I have had great success with eyeballer's image and instructions:
http://forum.xda-developers.com/showthread.php?t=1030227
Then load zip file one of the roms on SD card. 1.11.4 is the latest MIUI rom available at miui.us (my rom of choice)
http://roms.miui.us/
Turn off nook. Load SD card. Turn on nook. In mounts and storage (if it isn't there on initial.screen, tap the power button to go back) format data, format system. Clear cache. Then install zip file of rom.
If my directions don't make sense, post back and I will give you a very detailed list of steps.
Sent from my NookColor using xda premium

I had similar problems with MIUI on NC. I finally had to move to a different ROM. I currently running Phiremond 7.1 and it is very stable.

Returning to CM7 and Nook won't access Market

Hello XDA peeps.
I've had my Nook color for about 3+ years. Have had both my wife and mine running old versions of CM7 on the SD card without issue.
I recently dug mine out to set up for the kids (for a trip we're taking starting this weekend) and first installed CM10 (10.3 I think). loaded and was able to get apps running w/o issue but the poor old Nook and CM10 was so sluggish I felt it was just too much for this legacy device, so I reflashed to the CM7.2.0 [stable]
loaded just fine, but when I went to install GAPPS it installed fine, but will not allow me to access my account now.
no matter how many times I try, it tells me the password does not match for my account.
I know for a fact the password is the right one, and I can get on the Play store just fine on my Galaxy S3 using the same credentials.
I even reflashed the GAPPS to an older version and no luck.
Any thoughts? Really stuck here, since we're leaving Saturday morning and I want to have both Nooks up and running current versions of our boys fav games to pass the time. right now it has no app store, so it's pretty much a stripped Android tablet.

~poz said:
Hello XDA peeps.
I've had my Nook color for about 3+ years. Have had both my wife and mine running old versions of CM7 on the SD card without issue.
I recently dug mine out to set up for the kids (for a trip we're taking starting this weekend) and first installed CM10 (10.3 I think). loaded and was able to get apps running w/o issue but the poor old Nook and CM10 was so sluggish I felt it was just too much for this legacy device, so I reflashed to the CM7.2.0 [stable]
loaded just fine, but when I went to install GAPPS it installed fine, but will not allow me to access my account now.
no matter how many times I try, it tells me the password does not match for my account.
I know for a fact the password is the right one, and I can get on the Play store just fine on my Galaxy S3 using the same credentials.
I even reflashed the GAPPS to an older version and no luck.
Any thoughts? Really stuck here, since we're leaving Saturday morning and I want to have both Nooks up and running current versions of our boys fav games to pass the time. right now it has no app store, so it's pretty much a stripped Android tablet.
Click to expand...
Click to collapse
You said you were running CM7 on SD. How did you install the CM10? Then what did you do to get back to CM7? What wiping did you do?
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
You said you were running CM7 on SD. How did you install the CM10? Then what did you do to get back to CM7? What wiping did you do?
Click to expand...
Click to collapse
I actually have the CM10 on the root of the device. I thought I had put it on the SD card, but didn't. (just found this out by accidentally powering on the tablet w/o the card in it)
So, currently downloading the CM 10.2.1 update (from 10.1.3), and perhaps it will fix the sluggishness.
I have a third stock Nook that I have not touched in years that I'm going to flash on the SD card...see if I can't get it to CM7.2 w/o any issues.
but previously I had wiped the card twice and attempted to Reinstall CM7.2.
I think the fault lies in the steps I was following to burn the SD card.
Told me to add the gapps AFTER installing CM7
I was pretty sure in the past I put both on the same SD at the same time.
or it is possible the Google two-step verification/authorization is not compatible with the older Market app. I can get on the Play store just fine on CM10 (but it did have me open in the browser to verify the device).

~poz said:
I actually have the CM10 on the root of the device. I thought I had put it on the SD card, but didn't. (just found this out by accidentally powering on the tablet w/o the card in it)
So, currently downloading the CM 10.2.1 update (from 10.1.3), and perhaps it will fix the sluggishness.
I have a third stock Nook that I have not touched in years that I'm going to flash on the SD card...see if I can't get it to CM7.2 w/o any issues.
but previously I had wiped the card twice and attempted to Reinstall CM7.2.
I think the fault lies in the steps I was following to burn the SD card.
Told me to add the gapps AFTER installing CM7
I was pretty sure in the past I put both on the same SD at the same time.
or it is possible the Google two-step verification/authorization is not compatible with the older Market app. I can get on the Play store just fine on CM10 (but it did have me open in the browser to verify the device).
Click to expand...
Click to collapse
I don't think CM10.2 is going to help. CM7 is the best for NC. I would wipe the internal CM10 you have on there and install CM7 to internal. Be sure to put the right gingerbread gapps on there too.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
I don't think CM10.2 is going to help. CM7 is the best for NC. I would wipe the internal CM10 you have on there and install CM7 to internal. Be sure to put the right gingerbread gapps on there too.
Click to expand...
Click to collapse
yes, thank you. I feel anything higher than CM7 just boggs the processor on these dated tablets. For a kids' tablet, it's just fine and will run most of their games/books and it remains snappy. CM10 just feels overloaded. It is sluggish and slow to respond. I'll try to get it moved back to CM7.
I've been trying to flash the other Nook, but after much effort, I have not been able to get it to boot into recovery.
I have the same card set-up, but I cannot get it to start with the card....constantly goes to the B&N root.

~poz said:
I've been trying to flash the other Nook, but after much effort, I have not been able to get it to boot into recovery.
I have the same card set-up, but I cannot get it to start with the card....constantly goes to the B&N root.
Click to expand...
Click to collapse
Sometimes it is difficult to get the NC to boot from an SD. See my NC Tips thread linked in my signature and read section A9.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
Sometimes it is difficult to get the NC to boot from an SD. See my NC Tips thread linked in my signature and read section A9.
Click to expand...
Click to collapse
Thanks Leapinlar,
Still running into issues. now on BOTH Nooks.
I was pretty sure I remember something about an updated B&N ROM that was signaled with a Green sticker on the box, which the troublesome boot one has.
I am using the generic_sdcard_v1.3.img + cm-7.2.0-encore.zip + gapps-gb-20110828-signed.zip all being burned via Terminal on Mac.
The only thing that has changed since I was dabbling with these in the past was the CM release.
I am not able to find my original bookmark of the tutorial I used to use (2+ years ago) so I think there might be a flaw in the instructions I'm following now. (for instance, the instructions I'm following now, the dd= command isn't proceeded by 'sudo' and without the sudo command, it errors out when trying to write the generic SD image to the disc (says disc is not available or locked).
gonna keep trying, because I want to get these up and working for our trip...we have 36+ hours of driving over the course of a week, so I know they'll get bored of looking at sights, reading books, watching DVDs, etc. Mainly for my own sanity, since I'll be driving.
**EDIT* i found the original tutorial I used years ago in my trove of bookmarks. It was the original GlassKeys tutorial. gonna give that a shot and report back with my success/errors.

Well, one thing, if you are going to use that old original image file you need to rename the CM zip to begin with update-. That will not help with the booting issue, but will make it so that image will recognize the CM zip.
I have an updated image zip in my updated instructions for NC SD installs linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app

leapinlar said:
Well, one thing, if you are going to use that old original image file you need to rename the CM zip to begin with update-. That will not help with the booting issue, but will make it so that image will recognize the CM zip.
I have an updated image zip in my updated instructions for NC SD installs linked in my signature.
Click to expand...
Click to collapse
Thanks. should have mentioned that I did rename the file to "update"
got my old CM10 to boot into Linux penguin and it seemed to be doing it's thing, after formatting the SD card following the GlassKeys instructions, but it is now booting to CM10 still by default and if I hold the "n" key for the boot menu on Cyanoboot and try to boot from SD card (normal or recovery) it just stays on that screen until I power it down.
as for the second, untouched Nook, I did the GlassKeys instructions to the SD card for that and it loaded to Penguin and went through all the install procedures, but now it still boots to the B&N emm setup screen.
wish I had never taken the other to CM10. now I have two Nooks that aren't acting properly.
thing that bugs me is the first one was running fine, just market wouldn't recognize my sign-in...now both are jacked.:silly:

SUCCESS!!!
So thank you goes out to leapinlar!!!
I dropped what I had been doing on my system as far as the files I was burning and read over all your FAQ and tutorial.
I downloaded the files in your how-to and had the tricky OE ROM flashed in a jiff!
The second one is installing now on the peguin screen and JUST now loaded to the CM7.2 bootloader screen.
Still used the GlassKeys instrucitons on how to burn via Terminal on OS X, but used your files (generic-sdcard-v1.3-CM7-9-10-10.1-10.2-11-largest-Rev8c.zip )
My original issue, I have found through all this, was that the Market wouldn't allow me to sign in...well that is an issue with the 2-step verification for my Google account I had activated (someone tried to hack my account, so I had it on). Once I turned it off, I was able to open the market and sign in.
Thanks again for your help leapinlar....check this one off!
Going to update both tonight with our boys' fav apps and games and get ready to hit the road first thing Sat morning! :laugh:

If you want something newer I found that cm10.0 was pretty fast on nook color. Better than cm7. Anything newer I also found was to slow and laggy 10.1+. If interested the last nightly cm10.0 rom and gapps are over in the development fourm.

retrobot said:
If you want something newer I found that cm10.0 was pretty fast on nook color. Better than cm7. Anything newer I also found was to slow and laggy 10.1+. If interested the last nightly cm10.0 rom and gapps are over in the development fourm.
Click to expand...
Click to collapse
Thanks! but pretty happy with CM7. any more seems to be a bit much for these processors. both are up, loaded full of games/books and ready for the road trip. :highfive: