Database Users

[Q] I want to downgrade from this rom.

First, I'm sorry about my bad English.
I had troble when I applied CM9 12/7 Rom, so I restored from clockworkmod recovery, but it doesn't work!
That's why I have been flashed SBFs till now.
And I could boot my defy, but I noticed that I applied some weird Rom.
It is
http://forum.xda-developers.com/showthread.php?t=1375701
....
What can I do?
I want to use CM7/MIUI or some other roms
Help me.

try this http://forum.xda-developers.com/showpost.php?p=14762402&postcount=143
i didn't try it, just found it in the forum

im on the same boat.
did it work?

Look in the cm9 bug report thread I'm sure there are links and instructions for it. You have to flash cm7 kernel then do nandroid or reflash cm7.
Sent from my CM9 Defy

me too...i want to leave cm9!!!!! help!!! so, but work ms2ginger with installation istructions for soc camera... but not cm7!!!

powertony84 said:
me too...i want to leave cm9!!!!! help!!! so, but work ms2ginger with installation istructions for soc camera... but not cm7!!!
Click to expand...
Click to collapse
I cant quiete figure out what you're trying to tell me Oo
so i guess you can downgrade from cm9 to ms2ginger but not to cm7? oO
im currentliy switching a lot between cm9 and cm7 so you should just go into cwm and wipe everything, install cm7 wipe again and thats it...
i dont know if you really have to wiupe twice, but thats the way i do it and it works perfectly

esok44 said:
I cant quiete figure out what you're trying to tell me Oo
so i guess you can downgrade from cm9 to ms2ginger but not to cm7? oO
im currentliy switching a lot between cm9 and cm7 so you should just go into cwm and wipe everything, install cm7 wipe again and thats it...
i dont know if you really have to wiupe twice, but thats the way i do it and it works perfectly
Click to expand...
Click to collapse
bro when i apply cm7 it works perfectly but as soon as i apply gapps it starts rebooting from the cm7 logo again and again
what to do mahn im frustrated....:'(
please temme

d.o.doubleg said:
bro when i apply cm7 it works perfectly but as soon as i apply gapps it starts rebooting from the cm7 logo again and again
what to do mahn im frustrated....:'(
please temme
Click to expand...
Click to collapse
please post a link to the cm7 you were using. i'm thinking you used the wrong gapps. cm9's gapps doesn't work for cm7. you need to use the gapps for cm7. usually you can get cm7 gapps from the link in the first post of cm7 thread. like here:
http://forum.xda-developers.com/showthread.php?t=1033654
go down to the bottom of the first post and click on "latest google apps".

[Q]How to install CM7.2 on Defy

I'm currently on the latest CM7.1 nightly but when I tried to flash the cm7.2 nightlies which are for the defy+, I got stuck at the M logo. I then flashed my old 7.1 and now it's working again. Can someone tell me what I did wrong? Also, I didn't erase data, just cache.

I think that's because defy+ uses another kernel , so when you flash cm7.2 you still having froyo kernel , i think if you flash the cm9 kernel over cm7.2 it will work! But i 'm not sure
Motorola Defy CM7.1-11 OC 1GHz

Can you link me to both cm7 and cm9 kernels?
Sent from my MB525 using XDA App

fritolays said:
I packed the two different kernels into clockwork flashable packages.
1. Flash either a nightly or restore a nandroid.
2. Flash either CM7_Kernel-signed.zip or CM9_Kernel-signed.zip; depending on what you've installed.
3. Reboot.
CM7_Kernel-signed.zip
CM9_Kernel-signed.zip
Click to expand...
Click to collapse
Motorola Defy CM7.1-11 OC 1GHz

LeonardoJegigzem said:
Motorola Defy CM7.1-11 OC 1GHz
Click to expand...
Click to collapse
I tried those .Zips and they didnt work for me.
What I ended doing is restoring Boot/devtree using CWM from a Walter 2.3.6 rom and it worked

Let me get this right, first I need to flash CM7.2 and then I need to restore boot and devtree?
EDIT: Thanks leonardojegigzem. It worked!
Sent from my MB525 using XDA App

I need help. My camera isn't working.

Anyone? Please I really need help.

Have u tried deleting cache n data in application settings??
sent from my cyanogen mod 2.3.7 defy running at 1ghz and I absolutely love it

Zorua said:
I need help. My camera isn't working.
Click to expand...
Click to collapse
CM72 for DEFY+ didn't get camera working for now.

Any idea when it'll be fixed or if it'll ever be fixed?

Why don't you try the CM7.2 Nightlys for Defy and not for the +?
http://defy.wdscript.fr/jordan-nightly/
Sent from my Defy...

Yeah i just noticed no camera, went to take an amazing pic and it did not work
Sucks, because this ROM is really good.
Gesendet von meinem CM7 Defy

Dirk64 said:
Why don't you try the CM7.2 Nightlys for Defy and not for the +?
Click to expand...
Click to collapse
I guess because the ones for Defy+ are more recent. Newer = better.

Zephyrot said:
Yeah i just noticed no camera, went to take an amazing pic and it did not work
Sucks, because this ROM is really good.
Gesendet von meinem CM7 Defy
Click to expand...
Click to collapse
The camera works with the cm72-111213.0943-NIGHTLY-Defy+ nightly - of course red-lense only. See http://forum.xda-developers.com/showpost.php?p=20267108&postcount=14484 and http://forum.xda-developers.com/showpost.php?p=20399252&postcount=14580

Step by step guide to install roms
Zorua said:
I'm currently on the latest CM7.1 nightly but when I tried to flash the cm7.2 nightlies which are for the defy+, I got stuck at the M logo. I then flashed my old 7.1 and now it's working again. Can someone tell me what I did wrong? Also, I didn't erase data, just cache.
Click to expand...
Click to collapse
1.Reboot into recovery
2.Wipe data
3.Wipe Cache
4.Wipe Dalvik cache
5.Install zip from SD card
6.Choose zip from SD card
7.Install
8.Now same way install Gapps.
9.Now repeat 3rd and 4th step.
10.You are ready to rock and roll.(I mean, reboot the system)
---------- Post added at 05:38 PM ---------- Previous post was at 05:32 PM ----------
Zorua said:
Any idea when it'll be fixed or if it'll ever be fixed?
Click to expand...
Click to collapse
You should try CM7.2 rom for the device you possess i.e. Defy. :good:

Just install cm7.2 for defy (not +). If you want to flash the defy+ version, you will have to install gb kernel and battery fix.

[Q] Some quick questions thanks

1. My defy has stock froyo and I flashed it to cm7. Now I'd like to try cm9 or cm10, do I need to flash sbf or sth?
2. I saw in cm10's thread in which it gives gapps. If I flash cm9, can I use the gapps it provided in the cm10 thread?
3. My current cm7 is quite buggy and slow, cm9 and cm10 should be better?
Thanks.

bonedriven said:
1. My defy has stock froyo and I flashed it to cm7. Now I'd like to try cm9 or cm10, do I need to flash sbf or sth?
2. I saw in cm10's thread in which it gives gapps. If I flash cm9, can I use the gapps it provided in the cm10 thread?
3. My current cm7 is quite buggy and slow, cm9 and cm10 should be better?
Thanks.
Click to expand...
Click to collapse
Just wipe your data, cache and dalvik cache.
Install the CM10 ROM, then flash the updates.
Wipe cache and dalvik cache.
You are done! No need to do anything else. You are safe.
And Quarx CM10 is awesome!
You can use it daily.. and with the battery fix.. it will be too good.
Thank if I was helpful.
Cheers
Sent from my Awesome Defy!

sebuelias said:
Just wipe your data, cache and dalvik cache.
Install the CM10 ROM, then flash the updates.
Wipe cache and dalvik cache.
You are done! No need to do anything else. You are safe.
And Quarx CM10 is awesome!
You can use it daily.. and with the battery fix.. it will be too good.
Thank if I was helpful.
Cheers
Sent from my Awesome Defy!
Click to expand...
Click to collapse
Thank you buddy. Yesterday I just flashed CM9...not bad. What's battery fix??

Flash CM10 forget about CM9 ,the new CM10 by Quarks is the best

[Q] Help installing Maniac cm7.2 on defy+

Hey guys, i tried installing CM7.2 by maniac on my defy+ sometime earlier, and had problems passing, cyanogenmod logo.
I cleared all dalvik and cache but still nothing.
Steps:
- Cleared all partitions an cache.
- Installed rom, then cleared cache and dalvik
- installed gaaps, then cleared cache and dalvik
- Rebooted and now stuck.
Hope for some quick help...

I guess like me u too come from cm10 2ndBoot Roms. I had the same issue, suggest u to flash sbf before your battery dies.

ManDOT said:
I guess like me u too come from cm10 2ndBoot Roms. I had the same issue, suggest u to flash sbf before your battery dies.
Click to expand...
Click to collapse
I went back to cm10, heard from someone you have to change to ext3 if you want to flash CM7.2 and cm9 roms
Sent from my pimped up defy+ with JB 4.1.2 by Master Quarx

Please ask all questions in the Q&A section. Thread moved there.

try wipping /system with this tool, is faster than flash a SBF ...
http://forum.xda-developers.com/showthread.php?t=1818520

TeeJay3800 said:
Please ask all questions in the Q&A section. Thread moved there.
Click to expand...
Click to collapse
Sorry, and thanks for shifting it...
lexer98 said:
try wipping /system with this tool, is faster than flash a SBF ...
http://forum.xda-developers.com/showthread.php?t=1818520
Click to expand...
Click to collapse
Thanks will give it a try
Sent from my pimped up defy+ with JB 4.1.2 by Master Quarx

[Q] Nexus 4 ROMs

Hi,
I flashed PA 3.95 yesterday but I can't see some of the options that I saw on youtube.
Maybe I need to install something else or it just not in PA?
If I won't find the others options I'll flash other ROM so I want suggestions for a stable feature packed and fast ROM.
Thanks in advenced

VIPOA said:
Hi,
I flashed PA 3.95 yesterday but I can't see some of the options that I saw on youtube.
Maybe I need to install something else or it just not in PA?
If I won't find the others options I'll flash other ROM so I want suggestions for a stable feature packed and fast ROM.
Thanks in advenced
Click to expand...
Click to collapse
What options? Most of the customisation options for PA can be found in the Hybrid settings where you can customise almost everything.

VIPOA said:
Hi,
I flashed PA 3.95 yesterday but I can't see some of the options that I saw on youtube.
Maybe I need to install something else or it just not in PA?
If I won't find the others options I'll flash other ROM so I want suggestions for a stable feature packed and fast ROM.
Thanks in advenced
Click to expand...
Click to collapse
PA itslef the answer for you question.. "Rom with full of features and STABLE - 3.96"
Play with the rom.. you will find the options and If you want the exact answer please elaborate your question.. Which options you looking for?

Nigeldg said:
What options? Most of the customisation options for PA can be found in the Hybrid settings where you can customise almost everything.
Click to expand...
Click to collapse
Rohit02 said:
PA itslef the answer for you question.. "Rom with full of features and STABLE - 3.96"
Play with the rom.. you will find the options and If you want the exact answer please elaborate your question.. Which options you looking for?
Click to expand...
Click to collapse
OK, thank's guys!
I'll play with the rom a little bit and search some options that I didn't see.
If eventually I'll decide to flash other ROM, which one do you suggest me?
Thanks

VIPOA said:
OK, thank's guys!
I'll play with the rom a little bit and search some options that I didn't see.
If eventually I'll decide to flash other ROM, which one do you suggest me?
Thanks
Click to expand...
Click to collapse
The buttons are there if you want to thank us..
I would suggest Slimbean 4.3 or wait for Carbon rom. Both are good.

Why not CM10.2 if you want a stable ROM?
Sent from my Nexus 4 using xda app-developers app

Rohit02 said:
The buttons are there if you want to thank us..
I would suggest Slimbean 4.3 or wait for Carbon rom. Both are good.
Click to expand...
Click to collapse
I think Carbon looks cool, when do you think it'll have 4.3?
I'll search for some reviews on slimbean, THANK'S
BTW,
Which rom do you use?
Thibaultvw said:
Why not CM10.2 if you want a stable ROM?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
I thaught about it, is it official from CyanogenMod?
THANK'S

VIPOA said:
I think Carbon looks cool, when do you think it'll have 4.3?
I'll search for some reviews on slimbean, THANK'S
BTW,
Which rom do you use?
I thaught about it, is it official from CyanogenMod?
THANK'S
Click to expand...
Click to collapse
Not yet, but it is plenty of stable unofficial builds.
Sent from my Nexus 4 using Tapatalk 4

Thibaultvw said:
Not yet, but it is plenty of stable unofficial builds.
Sent from my Nexus 4 using Tapatalk 4
Click to expand...
Click to collapse
I prefer to use official builds...
what do you think about SlimBean?

VIPOA said:
I think Carbon looks cool, when do you think it'll have 4.3?
I'll search for some reviews on slimbean, THANK'S
BTW,
Which rom do you use?
I thaught about it, is it official from CyanogenMod?
THANK'S
Click to expand...
Click to collapse
I use Pa 3.96 and have tested the Slimbean latest build.. Carbon rom is out but not official yet. See tge thread and you will get the unofficial download link,same will be updated as official. :good:

Rohit02 said:
I use Pa 3.96 and have tested the Slimbean latest build.. Carbon rom is out but not official yet. See tge thread and you will get the unofficial download link,same will be updated as official. :good:
Click to expand...
Click to collapse
I'm trying slimbean now,
How to install it?
Like this?:
Wipe data
Wipe Cache partition
Wipe Dalvik Cache
Install rom
Install GApps
Wipe Cache partition
Wipe Dalvik Cache
Reeboot system

VIPOA said:
I'm trying slimbean now,
How to install it?
Like this?:
Wipe data
Wipe Cache partition
Wipe Dalvik Cache
Install rom
Install GApps
Wipe Cache partition
Wipe Dalvik Cache
Reeboot system
Click to expand...
Click to collapse
Like any rom: factory reset, wipe cache, dalvik cache, install rom, gapps, reboot

Thibaultvw said:
Like any rom: factory reset, wipe cache, dalvik cache, install rom, gapps, reboot
Click to expand...
Click to collapse
Like I said, right?
I just wiped cache after gapps...

VIPOA said:
I'm trying slimbean now,
How to install it?
Like this?:
Wipe data
Wipe Cache partition
Wipe Dalvik Cache
Install rom
Install GApps
Wipe Cache partition
Wipe Dalvik Cache
Reeboot system
Click to expand...
Click to collapse
If you are on 4.2.2 factory reset first otherwise skip this step.
rest is alright.. also flash the latest bootloader and radio from PA thread first post.. z20i is the latest bootloader and .84 is the latest radio.
very imp after flashing and wiping is done before rebooting FLASH SUPERSU V1.51 so that you wont have any root issues.. Done.

Rohit02 said:
If you are on 4.2.2 factory reset first otherwise skip this step.
rest is alright.. also flash the latest bootloader and radio from PA thread first post.. z20i is the latest bootloader and .84 is the latest radio.
very imp after flashing and wiping is done before rebooting FLASH SUPERSU V1.51 so that you wont have any root issues.. Done.
Click to expand...
Click to collapse
What????
What are you talking about lol?
I'm running PA 3.95...

You can Flash MIUI rom if you are bored with the regular android looks.