Related
Hi everybody, this what happened:
I tried to flash my atrix with Atrix 1.26 Retail SBF through RSDLite.
After that it shut down and when i try to turn it on it says :"Failed to boot 0X1000" then it shuts down again. It doesn't even give me any option.
For the record, my phone was up to date (i got that wifi only system update by att). Also, this phone is unlocked and I have no warranty with any carrier.
I hope I didn't brick it.
Please give me simple solutions if there is any. Your help will b very much appreciated.
Thank you so much.
i'll let others break down the news to you..
Sorry bud, but I believe you now have a nice set of glass upon to look at.
Sent from my MB860 using XDA
Can't believe people are still doing this with all the warnings in the forums.
You tried to SBF back to 4.1.26 (Froyo) on a bootloader unlocked phone. You now have a very expensive reflective beer coaster!
I think Nottach recover "failed to boot 0x1000"
also take look here
http://forum.xda-developers.com/showthread.php?t=1165154
klobass said:
I think Nottach recover "failed to boot 0x1000"
also take look here
http://forum.xda-developers.com/showthread.php?t=1165154
Click to expand...
Click to collapse
Sorry man, like the others said, it's bricked...
I have tried this before on 3 different bricked phones and it didn't work... I wish it did though...
klobass said:
I think Nottach recover "failed to boot 0x1000"
also take look here
http://forum.xda-developers.com/showthread.php?t=1165154
Click to expand...
Click to collapse
This error also comes up with soft bricks which you can fix as you gave options to choose from and can recover. This guy has no options.
Sent from my MB860 using xda premium
Alaq said:
Sorry man, like the others said, it's bricked...
I have tried this before on 3 different bricked phones and it didn't work... I wish it did though...
Click to expand...
Click to collapse
Mashina khaye, there must b smthn to do about it!
Aerie fel website hayda! Everybody's being so negative!
Come on guys. I really need help.
For those who think i was doing it 4 fun, i need it for work and i just wanted to fix it asap that's why i screwed up.
7oucem said:
Come on guys. I really need help.
For those who think i was doing it 4 fun, i need it for work and i just wanted to fix it asap that's why i screwed up.
Click to expand...
Click to collapse
People are being helpful...by telling you sorry. If you need it for work, you'll probably just need to go buy a new phone ASAP. Like others have said, there are plenty of warnings and instructions on what/what not to do on your phone. Unfortunately, you missed those. Hope you can find another phone for cheap...
You have a hard brick, never try to downgrade. Nottach was able to fix his because he got a brick by upgrading, and he was lucky enough to figure it out. Downgrading on the other hand ruins your device, every time
Sent from my MB860 using xda premium
7oucem said:
Come on guys. I really need help.
For those who think i was doing it 4 fun, i need it for work and i just wanted to fix it asap that's why i screwed up.
Click to expand...
Click to collapse
We are helping you, by telling you that there's nothing that you can do. Your phone is hard bricked. There is absolutely no way to recover from a hard brick, period. You need to replace the phone. That is the reality, and there is no getting around it.
I was running CM9 on my Atrix when my digitizer went bad and I got a dead spot. I submitted it for warranty and before I sent it I tried to put it back to normal. I did something wrong I guess and ended up with a different boot error (didn't even give me an error code the screen was black unless I plugged it in I just got the NV flash thing). Anyways, I sent it in and the same phone came back completely working with a fixed screen. I think when they get it they hook it up with a factory cable and flash it back to stock with the SBK, which we don't even have access too. Just send it in for warranty saying it has software problems, and I can almost guarantee you it will come back working.
BravoMotorola said:
Just send it in for warranty saying it has software problems, and I can almost guarantee you it will come back working.
Click to expand...
Click to collapse
He has no warranty.
CaelanT said:
He has no warranty.
Click to expand...
Click to collapse
Possible he does with motorola. OP there is a tool on motorola website to see if its under warranty. Maybe give that a shot.
Bro do some reseatch that error message is a soft brick I believe I ran into a similar issue when I first roote it last year
Just thought I would weigh in that I received this same error code after an attempted SBF flash of zomgunlock-lite.sbf, and thought all hope was lost, but then I found this post: http://forum.xda-developers.com/showpost.php?p=27158667&postcount=153
The instructions there helped me un-brick my phone, and I'm a happy camper once again
Hi to all. I nave a problemi with my nexus.
1) sometimes when i press the Power button for unlock the phone, i can find it in landscape mode and the phone is blocked band i must do a force reboot
2) when i put it with usb in PC, the PC not see it. The phone go only in charge mode but not AS MTP... i have try to install the drivers manually and from toolkit v1.3... But nothing ... I cant see the phone ad MTP..
I have see, that when the phone is in charge i not find the problem of landscape and block.
What's the problem? How i can fix it?
I cant do a root to the phone and try to fix it with a change rom .
I have try too, root and install the CWM from Adb commando, but the PC not recognize it when i active debug mode...
Please help me
Wrong thread.
Also, are you currently stock or what? Need more info to help
Sent from my Nexus 4 using xda premium
Skillfulshoe said:
Wrong thread.
Also, are you currently stock or what? Need more info to help
Sent from my Nexus 4 using xda premium
Click to expand...
Click to collapse
Stock ROM. With stock kernel. Secure bootloader and no root... I haven't mod it...a
Factory reset it maybe?
Sent from my GT-P3113 using Tapatalk HD
use your warranty
Moving to Q&A
All of us have issues with our devices from time to time, and we all need some help with it. There is no need to come down on any user because they borked their $300+ device. If you can't give any advice to help resolve the users question, please move on to another post that you can contribute to.
I don't have the answer to your issue, but I might suggest using the search function, and read like crazy. You will most likely find your answer(if someone doesnt post it here first )
shahabk818 said:
use your warranty
Click to expand...
Click to collapse
I wanna use my warranty , but i live in Italy... How i can use it?
And...i have try with factory reset but i haven t resolve
I have see..that phone Give me the ptoblem when the battery is full charge, and if i not lock it , it work perfectally
And i have see that when it his in charge , it doesnt Give problems
Nobody can help me?
There si method for do a root from on phone?
Example: z4root, superoneclick or similar?
http://www.2nas.com
Provides :
1: Integrates Unbrick / Flash ROM / Root All-In-One.
2: Use the same protocol as ODIN, but 2nas is more user-friendly and easy-to-use.
3: Cloud based database to flash your android phone with correct files(ROM, etc)
4: Automatically download necessery files to flash, and check them with SHA1, it's safe for your phone.
5: Store all downloaded files in local disk, under a good directory structure, it's usefull when you have several phones.
Re: Cloud-based Android Flash Tools
So you are having people flash their phones over the internet? What if the net disconnects? I hope the service is free ....and is this service even necessary. Flashing roms sometimes ends up in problems and you have to flash again, isn't it better to just use Odin and have the roms on a pc?
Sent from my Nexus 7 using xda app-developers app
kofiaa said:
So you are having people flash their phones over the internet? What if the net disconnects? I hope the service is free ....and is this service even necessary. Flashing roms sometimes ends up in problems and you have to flash again, isn't it better to just use Odin and have the roms on a pc?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
just looked at the site, looking at the screenshot, it just looks like a pc app that downloads firmware from the clouds?
So not actually flashing over the net.
f0xy said:
just looked at the site, looking at the screenshot, it just looks like a pc app that downloads firmware from the clouds?
So not actually flashing over the net.
Click to expand...
Click to collapse
download firmware from cloud, store in local disk and check SHA. you can flash whenever you want.
enjoy it.
kofiaa said:
So you are having people flash their phones over the internet? What if the net disconnects? I hope the service is free ....and is this service even necessary. Flashing roms sometimes ends up in problems and you have to flash again, isn't it better to just use Odin and have the roms on a pc?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Hi, it' free .
and it downloads firmwares from cloud ,store in local disk and checks it's SHA. you can use the firmwares again and again without re-download.
Use the same protocol as ODIN, but 2nas is more user-friendly and easy-to-use.
alright.. how is it 'cloud'? Are you just using the word cloud as a synonym for 'internet'? There's nothing in the software that requires a 'cloud'..
Sorry, but just had to vent.
Re: Cloud-based Android Flash Tools
fuflo said:
alright.. how is it 'cloud'? Are you just using the word cloud as a synonym for 'internet'? There's nothing in the software that requires a 'cloud'..
Sorry, but just had to vent.
Click to expand...
Click to collapse
I guess in this case, the database of ROM's name, dowbload link as cloud?
Sent from my GT-I9300 using xda premium
fuflo said:
alright.. how is it 'cloud'? Are you just using the word cloud as a synonym for 'internet'? There's nothing in the software that requires a 'cloud'..
Sorry, but just had to vent.
Click to expand...
Click to collapse
ROM matching is base on the Cloud. When I add New-ROMs or New-Flash-Instructions, you needn't to download this software again
Why not have a try? ^&^
Updated
http://www.2nas.com
2013-2-3 Version 1.0.0.124
Add Feedback function to improve our service.
Add Instruction-Webpages to avoiding mis-operation.
Can't get it.
Would be nice to know what your tool/service is capable to.
I flashed a wrong ROM, so I still can get to the download but not into recovery mode.
I download the USB driver and your software........and then ????
I don't have currently a proper PC/laptop to try, only a company laptop which doesn't allow me to play with.
More details would be highly appreciated to bring my S3 back to life when I'm back home.
Sent from my HD2 used by LinChina
Thanks it is a very helpful piece of software..
Meemo23 said:
Thanks it is a very helpful piece of software..
Click to expand...
Click to collapse
???????
In terms of what and how ??
What were you able to do respectively which kind of issue could you solve ??
More details....... please !!
Sent from my HD2 used by LinChina
LinChina said:
???????
In terms of what and how ??
What were you able to do respectively which kind of issue could you solve ??
More details....... please !!
Sent from my HD2 used by LinChina
Click to expand...
Click to collapse
Was i speaking to you. You're so dumb you can't read. Look at the first post.
And why would i want to leave details for idiots.
These days every single last person on here is stupid.
They cannot read nor can they be bothered to find out.
Always leeching and begging yet not giving credit to anyone for their hard work.
So here is more detail for you STFU and go back into hiding..
Absolutely brilliant work and thanks for sharing with us much respect thanks man :thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup::thumbup:
Sent from my GT-I9300 using xda app-developers app
Unbrick failed
As mentioned before I couldn't install 2nas software on my company laptop, but in the meanwhile I borrowed one and tried the unbrick function.
Everything worked well till I started the installation after the download, so it failed straight away at the flashing of the boot.img, see attached screenshots.
Initial rom on my S3 was I9300XXLEF (Hong Kong) and I flashed Samsung Galaxy S III GT-I9300 Stock Firmware Collection I9300XXEMA2 after that it didn’t re-boot because of wrong ROM, if I try to get into recovery it shows the “Firmware upgrade encountered issue. Please select recovery mode in Kies & try again” screen..
@ Meemo23
I asked polite and didn't expect that kind of profane reply w/o any substance apart personal bashing.
Cheers.....LinChina
Meemo23 said:
Was i speaking to you. You're so dumb you can't read. Look at the first post.
And why would i want to leave details for idiots.
These days every single last person on here is stupid.
They cannot read nor can they be bothered to find out.
Always leeching and begging yet not giving credit to anyone for their hard work.
So here is more detail for you STFU and go back into hiding..
Click to expand...
Click to collapse
Guy just asked how it helped you, meaning how di you applied it, and what issue have you solved.
But, as I see, reading with understanding is beyond your abilities, instead, you are very keen to abuse someone.
Off topic question: are you abusing all peoples when you're unable to understand their question(e.g. your nanny is in bathroom)?
Sad to say, but I can see a lot of problems when your parents will send you to nursery...
Get Cloud-Based AI error...
please somebody help me out in this situation, i installed 2nas CFT, the software detect my phone but when i try to unbrick it, nothing appear at the Configuration Wizard, somebody help meeeee... :'(
Not sure if the phone was previously rooted or not, but now when I turn it on it says firmware upgrade encountered an issue. Please elecet recover mode in kies and try again. I tried an odin and it says FAIL (AUTH) any ideas?
zachsx said:
Not sure if the phone was previously rooted or not, but now when I turn it on it says firmware upgrade encountered an issue. Please elecet recover mode in kies and try again. I tried an odin and it says FAIL (AUTH) any ideas?
Click to expand...
Click to collapse
Are you on MF3 firmware. And have you read the several threads available about the problems with Kies and ODIN with MF3 and any sollutions there might be?
The "pinned" threads in the general and Q&A sections are a good place to start. Also make sure to read any threads about MF3. Good luck.
If you are not on MF3 firmware, I still suggest you read.
scott14719 said:
Are you on MF3 firmware. And have you read the several threads available about the problems with Kies and ODIN with MF3 and any sollutions there might be?
The "pinned" threads in the general and Q&A sections are a good place to start. Also make sure to read any threads about MF3. Good luck.
If you are not on MF3 firmware, I still suggest you read.
Click to expand...
Click to collapse
I have no clue if I have MF3 from what I read it seems like I do :/
From what I can read and tell, it looks like I'm **** out of luck.....
zachsx said:
I have no clue if I have MF3 from what I read it seems like I do :/
Click to expand...
Click to collapse
Did you buy the phone in this condition? Because I can't imagine how any thought process would allow someone to do ANYTHING to a phone if they didn't at least (and I mean at the very least) know what firmware the phone was running. And actually, much more than that needs to be learned before the phone is ever touched.
So you bought it from someone like that?
scott14719 said:
Did you buy the phone in this condition? Because I can't imagine how any thought process would allow someone to do ANYTHING to a phone if they didn't at least (and I mean at the very least) know what firmware the phone was running. And actually, much more than that needs to be learned before the phone is ever touched.
So you bought it from someone like that?
Click to expand...
Click to collapse
Yes, and When I plugged it in it said that there was an update. Than here I am now in this boat. lol
MF3 can be J-Tagged now. So there is hope. Hit up mobiltechvideos. They do awesome work.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Try manually putting the phone into ODIN (download) mode and then manually cancel out of it (volume down button...I think). and see if it boots up. There is also a thread in the general section about "a fix for KIES", you might want to check it out. Also, apparently Best Buys stores can reflash MF3 phones if you ask them nicely. All of this might help if you were on MF3.
If you were not on MF3, try to ODIN back to stock. Only do this with MDB or MDL firmware.
Good luck.
scott14719 said:
Try manually putting the phone into ODIN (download) mode and then manually cancel out of it (volume down button...I think). and see if it boots up. There is also a thread in the general section about "a fix for KIES", you might want to check it out. Also, apparently Best Buys stores can reflash MF3 phones if you ask them nicely. All of this might help if you were on MF3.
If you were not on MF3, try to ODIN back to stock. Only do this with MDB or MDL firmware.
Good luck.
Click to expand...
Click to collapse
I tried hitting cancel then it gives me the kies error message. It doesn't boot up. I have no clue what firmware im running now, which is probably why im in the boat when I tried odining it.
Do you have a best buy near you with the "samsung experience?"
http://forum.xda-developers.com/showthread.php?t=2435043
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Red_81 said:
Do you have a best buy near you with the "samsung experience?"
http://forum.xda-developers.com/showthread.php?t=2435043
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yeah, I just finished "Chatting" with samsung I'll head there tomorrow
zachsx said:
Yeah, I just finished "Chatting" with samsung I'll head there tomorrow
Click to expand...
Click to collapse
let us know how it goes
No go, They said they couldn't get the phone to read......Which is stupid cause it runs on my computer fine.... I'm beyond frustrated.
It is possible that it has a partial EMMC failure. Try mobiltechvideos. I'm not joking. If they can fix it, nothing can.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
graydiggy said:
It is possible that it has a partial EMMC failure. Try mobiltechvideos. I'm not joking. If they can fix it, nothing can.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I called AT&T and they are going send a warranty replacement, I was completely honest about my situations. After talking to Samsung at Best Buy, He told me it was a software issue and to contact AT&T
Guess what! I pulled this phone back alive! Oh yeah!!!! Stunning! HAPPY! lol Im looking for the link that saved my butt just touch base with everyone!
http://forum.xda-developers.com/showthread.php?t=2404970 This is what saved my goods, so if you know anyone is having the same problem its kind of a loop hole works wonders.
Congrats.
As a friendly reminder, please watch the language. We have users of all ages here. I suggest replacement of the offending words.
Deleted the quote. Thanks OP.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Mine working
Just to let everyone know I flashed to stock firmware MDL and when I rebooted it had a software update which I did without thinking which MF3. I then rooted with know problems and at this point I used goo manger and attempted to install CWM bad idea. Should have read but didn't but I read for a week trying to figure out and try everything I could think of no deal. I saw that people talked about going to best buy so I went to one close to me and system kept showing device not found the person told me he couldn't do anything so I called AT&T who wanted me to travel clear across the city to have it flashed or replaced. Decided that was to much so I went to another best buy and his system said not supported. He called Samsung and they wanted me to send it in or take to there Samsung repair center which was only couple miles away which I did. They had no problem flashing it funny thing they used Odin which they have the files for. I tried to get the guy to give me a copy of the software but he said he couldn't oh well I tried but it does prove that there is Odin files for it just have to wait. I know this is long post just thought that maybe it will help others.
Hi guys,
I red the whole world about finding a solution for my issue, but didn't find anything that worked. I've got my note 3 n9005 flashed with stock 4.4 and the IMEI is showing null and the Baseband is unknown. I red that the IMEI restoring is done through the EFS folder somehow, but unfortunately I don't have it backed up Didn't find anything about the Baseband as well.
Could you guys help me get my note fixed.
Thanks in advance.
Click to expand...
Click to collapse
SOLUTION:
After investigating my issues forever I finally found out that my note was a Demo version. The guy that sold it to me lied about it, but anyway I returned it to him.
You can check if yours is a demo when disassemble it. You need to be looking for an antenna (it's a long wire coming from the back-right-bottom of the phone, going to the top of it). Unfortunately I deleted my photos showing where the antenna is, but you could search in google. If there is no such wire, your unit is most probably a demo phone.
berrg said:
Hi guys,
I red the whole world about finding a solution for my issue, but didn't find anything that worked. I've got my note 3 n9005 flashed with stock 4.4 and the IMEI is showing null and the Baseband is unknown. I red that the IMEI restoring is done through the EFS folder somehow, but unfortunately I don't have it backed up Didn't find anything about the Baseband as well.
Could you guys help me get my note fixed.
Thanks in advance.
Click to expand...
Click to collapse
Hello again
Try having a look here it should help you understand the issue as well as solve it.
nvm
radicalisto said:
Hello again
Try having a look here it should help you understand the issue as well as solve it.
Click to expand...
Click to collapse
Will try it
Hahahahahah (sorry for laughing)
Your cpu is a qualcomm(brand name) snapdragon(cpu name)
What u said is like:i dont have windows, i have vista ?
hit 'thanks' if i helped you
SM-N9005 0x0 X-Note7 ML2
XDA Developers 4 premium app
Killberty said:
Hahahahahah (sorry for laughing)
Your cpu is a qualcomm(brand name) snapdragon(cpu name)
What u said is like:i dont have windows, i have vista ?
hit 'thanks' if i helped you
SM-N9005 0x0 X-Note7 ML2
XDA Developers 4 premium app
Click to expand...
Click to collapse
... worst happened .. after following the proposed "Soft bricked [ SOLVED ]" my phone got hard bricked :crying:
It doesnt power up, it doesnt indicate anything ..
Guys please help me
[How To] Recover From a Hard Brick :D
you can use this xda [How To] Recover From a Hard Brick
maybe its a approach.
In the first line stay: ............ I snagged it from Shabbypenguins post over on Phandroid. It was originally for the Boost Mobile SGS3, but works for the Note 3 and several other devices.
berrg said:
... worst happened .. after following the proposed "Soft bricked [ SOLVED ]" my phone got hard bricked :crying:
It doesnt power up, it doesnt indicate anything ..
Guys please help me
Click to expand...
Click to collapse
Did you read the thread like I said and try to understand the issue before trying it?
Marci95 said:
you can use this xda [How To] Recover From a Hard Brick
maybe its a approach.
In the first line stay: ............ I snagged it from Shabbypenguins post over on Phandroid. It was originally for the Boost Mobile SGS3, but works for the Note 3 and several other devices.
Click to expand...
Click to collapse
Have a read throught that and see ^^
You must read and learn what causes issues before you try to resolve them, If you don't it can cause all sorts of issues.
I have the same problem. Is there any solution for this? Null IMEI and unknown baseband version
up.hope theres a solution for this..tnx in advance!
radicalisto said:
Did you read the thread like I said and try to understand the issue before trying it?
Have a read throught that and see ^^
You must read and learn what causes issues before you try to resolve them, If you don't it can cause all sorts of issues.
Click to expand...
Click to collapse
So I need an Unbrick image for n9005 .. and there is absolutely no such anywhere
I don't know .. is it because the phone is still new, or because you also don't know the solution :cyclops:
berrg said:
So I need an Unbrick image for n9005 .. and there is absolutely no such anywhere
Click to expand...
Click to collapse
So I found an image from this guy, wrote it to an 32GB mem card with Win32DiskImager, put the card in the phone, put the battery, pressed the power button (also tried all combinations) .. and guess what ... the phone doesn't wake up. Nothing happens ;(
Any other suggestions you could help with, guys?
All help will be highly appreciated!
berrg said:
So I found an image from this guy, wrote it to an 32GB mem card with Win32DiskImager, put the card in the phone, put the battery, pressed the power button (also tried all combinations) .. and guess what ... the phone doesn't wake up. Nothing happens ;(
Any other suggestions you could help with, guys?
All help will be highly appreciated!
Click to expand...
Click to collapse
How old was the image you used? I know there are problems reverting bootloaders from 4.4 back to 4.3.
Have someone make you a fresh image using a 4.4 stock Rom.
Sent from my SM-N900T using Tapatalk
---------- Post added at 02:43 AM ---------- Previous post was at 02:38 AM ----------
Also, there is a fix for the gt-i9500 (s4) here: http://answers.yahoo.com/question/index?qid=20131127193348AAghmtX
Try and find out who made that and see what they did to fix it so you can make one of your own.
Sent from my SM-N900T using Tapatalk
noobtoob said:
How old was the image you used? I know there are problems reverting bootloaders from 4.4 back to 4.3.
Have someone make you a fresh image using a 4.4 stock Rom.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
I don't know how old it is, but yes, I suppose it comes from 4.3
How is the unbrick image made (windows way), so I would tell someone to do it for me?
Thanks.
[/COLOR said:
Also, there is a fix for the gt-i9500 (s4) here: http://answers.yahoo.com/question/index?qid=20131127193348AAghmtX
Try and find out who made that and see what they did to fix it so you can make one of your own.
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
That's for the first issue I had. I think I will need to first wake up the device and then hopefully will move forward.
noobtoob said:
How old was the image you used? I know there are problems reverting bootloaders from 4.4 back to 4.3.
Have someone make you a fresh image using a 4.4 stock Rom.
Sent from my SM-N900T using Tapatalk
I don't know how old it is, but yes, I suppose it comes from 4.3
How is the unbrick image made (windows way), so I would tell someone to do it for me?
Thanks.
Click to expand...
Click to collapse
OK I found a method ...
berrg said:
OK I found a method ...
Click to expand...
Click to collapse
Sweet, I will keep an eye out to see how it goes....
Sent from my SM-N900T using Tapatalk
noobtoob said:
Sweet, I will keep an eye out to see how it goes....
Sent from my SM-N900T using Tapatalk
Click to expand...
Click to collapse
Anyway while waiting, do you think there is a way of flashing the SD card itself with the required files from an original or custom rom.
I mean, if I unzip the rom, will I find the files that I need there?
This might be a stupid question, but might be worth asking it.
There is a t-flash method, but we tried it and it didn't work over in the t mobile section. The problem being is you have to use a working phone to do so, and it is always a risk to the other party.
Sent from my SM-N900T using Tapatalk
you'll have to bite the bullet and do what I had to do a few days ago and get it done properly via a phone repair shop