Is possible ntfs suport and usb host in my defy??
Sorry For Bad English
Well, a simple search on the forums will explain that.
The response is: No. The locked bootloader don't allow us to flash custom kernels with these improvements.
hm Not too sure about that... for some things we don't need to flash a custom kernel, but it is sufficient to compile and load a kernel module... so at least ntfs could be supported? don't know if the hardware supports usb host, and without that, ntfs is a bit useless that's just what i think without doing some research.
Sent from my MB526 using XDA
Related
I'm working on USB host support on our i9000. With the help of Galaxy Player kernel sources I think we manage to do this. Galaxy Player DOES support USB OTG host mode and is almost identical to our Galaxy S, the main difference is lack of GSM/CDMA module. Same CPU, same USB switcher (FSA9480) etc. Kernel sources looks promissing. You may say that i9000 is not able to provide power to power the device, but we can use self powered USB hub to do that
Look at the sources:
SAMSUNG OPEN SOURCE RELEASE CENTER -> Mobile -> MP3 Player & Etc. -> YP-GB1
What a great news! Following with interest!
Since this is not yet development, I will move it to general.
As soon as you have something ready, you can open a new thread in the development subforum or ask me to move the existing one.
Cheers
Awesome news...!!!
You are the guy!!!
From a far away galaxy(S)
Thank you. This will be great.
Sent from my GT-I9000 using Tapatalk
http://forum.xda-developers.com/showthread.php?p=20797838
Some other dev. has already made this?
Thx for reading, press THANKS if u like
you give us a good information but you link is for the galaxy note, no for the galaxy s.
so much things can be variable from device to one other even if they come from the same brand "processeur,usb, drivers..."
Wait and see for this project is very usefull to use usb host
O-T said:
http://forum.xda-developers.com/showthread.php?p=20797838
Some other dev. has already made this?
Thx for reading, press THANKS if u like
Click to expand...
Click to collapse
We are talking about devices powered by S5PV210 cpu, Note is more like SGS2, for us completely different story.
Compile kernel with support for module fuse.ko
or
Check out this app http://forum.xda-developers.com/showthread.php?p=19815461
Can someone explain what USB OTG Host mode means ?? i simply dont get it ....
saphirrot said:
Can someone explain what USB OTG Host mode means ?? i simply dont get it ....
Click to expand...
Click to collapse
Google helps dude. Search before asking.
http://en.wikipedia.org/wiki/USB_On-The-Go
Right there, first line:
"USB On-The-Go, often abbreviated USB OTG, is a specification that allows USB devices such as digital audio players or mobile phones to act as a host allowing a USB flash drive, mouse, or keyboard to be attached."
Google helps dude. Search before asking.
Click to expand...
Click to collapse
WAU, thats ****ing friendly boy... instead of posting a site like wikipedia, a small sentence will help a lot more !
Great,keep it up B)
Any News?
sztupy made it working on teamhacksung's ICS kernel.
It's also working on Onecosmics ICS, so if you are on one of these ROMS, try this kernel.
http://forum.xda-developers.com/showthread.php?t=1450298
It's also implemented in the Devil and Glitch ICS Kernels...
Engelhuber said:
sztupy made it working on teamhacksung's ICS kernel.
It's also working on Onecosmics ICS, so if you are on one of these ROMS, try this kernel.
http://forum.xda-developers.com/showthread.php?t=1450298
It's also implemented in the Devil and Glitch ICS Kernels...
Click to expand...
Click to collapse
Hello,
i'v try to get OTG whith RC3.1 and glitch V14, but can't get mounted volume...
somebody get OTG works Onecosmics ICS?
OTG and Onecosmics RC3.1...
What kernel must choose?
Ledadu said:
OTG and Onecosmics RC3.1...
What kernel must choose?
Click to expand...
Click to collapse
See my last Post.
There is a modded hacksung Kernel and Glitch v14, Devil for example.
---------- Post added at 10:24 PM ---------- Previous post was at 09:28 PM ----------
rustako said:
Hello,
i'v try to get OTG whith RC3.1 and glitch V14, but can't get mounted volume...
somebody get OTG works Onecosmics ICS?
Click to expand...
Click to collapse
Never tried any storage. Tried to get my DSLR working, but had no luck.
USB host controller detects my Cam with additional power, but dslr controller doesnt
Dont know whats wrong. Let me know if you have any news
I tried whith glitch V14 on onecosmic rc3.1 but detect nothing...
And now i'm on onecosmic rc4 (pulled) whith neo kernel, and the driver is detected too, but always nothing on usb tab in "usn host controler" app..
i put operation mode on OTG mode..
i'v got :
OTG [on the go] - USB HOST Câble / Adaptateur pour Samsung Galaxy i9100 S2 / SII - micro USB <-> USB FEMALE
USB MALE <-> Mini usb
Mini Usb<-> Hub usb 2.0
USB key
USB HDD
Is it possible to use a custom kernel on the defy even though it has a locked bootloader? As it is possible to load custom kernel modules which will then run in supervisor mode, it should be possible to write a kernel module that copies itself at the end of RAM, disables all interrupts so that execution doesn't jump out of the module, jumps into its own copy at the end of the RAM, loads another kernel into the start of the RAM and jumps into it, right?
defy cant run custom build kernels because of the bootloader..
but AFAIK you should be able to compile and load modules outside the kernel or something, i would really like USB host mode on defy, maybe someone skilled enough can try it??
hsrars-d said:
defy cant run custom build kernels because of the bootloader..
Click to expand...
Click to collapse
Uh, did you even read my post? I'm suggesting to first let the bootloader load the stock kernel, then let the init process load a kernel module that loads another kernel and jumps into it. No need to touch the bootloader, you'd simply put another bootloader into a kernel module.
Now I found http://forum.xda-developers.com/showthread.php?p=24918641&highlight=defy#post24918641 ... I wonder whether it's possible to carry the 3G driver's state over a reboot...
umm, sorry i was bit sleepy, dunno about kecex though
EDIT: and i found this :http://www.eternityproject.eu/topic/49-bootloader-bypass-kexec-for-motorola-razr/#entry342
EDIT2: -.- i'm still sleepy
Somewhere is a post where Quarkz confirmed that we can't use kexec. He posted a conversation with the kexec main developer to do it. Maybe on cheesecake thread.
Sent from my MB525 using xda app-developers app
So to all of you wondering about USB OTG on our play its impossible Just look at all the forms asking these questions:
Does the Play support OTG
Usb on-the-go xperia play
Dooms attempt at usb otg
here is a app attempt to get it to work....
theoretically it MIGHT be possible if we can build a kernel to do so but ATM none exist the closest we got was dooms attempt and that failed.....so i hope this answers all your questions
On doomlord's thread, cosmicdan already explained why otg is not possible.
Sent from my Nexus 7 using Tapatalk 4
hey, i have a nexus 4 with android 5 and just flushed the kernel defcon-96u-unleashed-AOSP_mako.zip [which you can find here http://forum.xda-developers.com/nex...nel-ultimate-unleashed-kernel-series-t2845768 ] .
this kernel supports otg, and it comes with a "synapse" application [there i made a "v" over the otg enable option].
iv'e got a small micro usb external memory storage of 32 gb flat32 , and when i insert it to the nexus nothing happends.
i guess as you can all see im really new with this ^^...
please help me! how can i fix it?
Should be a y with an external power source but you should really ask this in the thread for the kernel
Sent from my Nexus 4 using XDA Free mobile app
n2d551 said:
Should be a y with an external power source but you should really ask this in the thread for the kernel
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
The thread itself has like 200+ pages so its really confusing finding it.
I thought maybe someone alse had this problem and might know how to solve it and help me.
Anyone ? Please help !...
[email protected] said:
The thread itself has like 200+ pages so its really confusing finding it.
I thought maybe someone alse had this problem and might know how to solve it and help me.
Anyone ? Please help !...
Click to expand...
Click to collapse
as said in the previous reply to your question nexus 4 requires Y otg cable. the reason is that nexus 4 hardware does not support powering devices via usb so you need a y cable to power your usb externally
You just need to flash a custom kernel you can try this ONE It has otg support and works on cm 11 and android L
I flashed that custom kernel , and there is an option for otg which i have enabled but nothing comes up when i plug in the external memory.
I dont think there is a difference between using simple microusb external memory and a regular usb external memory conected via y cable.
Please help me fix it ! , i really need that otg.!
Two posts above yours. You need a Y otg cable and external power source for your usb
I would like to give the rom tesla 2.3 support to the microsd with exfat system try several script eh even fuse tools but I can not reach, could someone tell me how could I support this rom?
someone who knows please? I want this to be my daily use but this small mistake prevents me from using it
@linusdan @GreekDragon do you know any way I can support exfat?
Abels2 said:
someone who knows please? I want this to be my daily use but this small mistake prevents me from using it
@linusdan @GreekDragon do you know any way I can support exfat?
Click to expand...
Click to collapse
No have idea.
I do not know if you're asking about the contents of the ROM.
Just in case, I would like to inform you that the ROM should contain:
/system/lib/libexfat.so
/system/bin/fsck.exfat
/system/bin/mkfs.exfat
/system/bin/mount.exfat
ze7zez said:
I do not know if you're asking about the contents of the ROM.
Just in case, I would like to inform you that the ROM should contain:
/system/lib/libexfat.so
/system/bin/fsck.exfat
/system/bin/mkfs.exfat
/system/bin/mount.exfat
Click to expand...
Click to collapse
I want to apply support for exfat cards I understand that it must be under your kernel which is GeniSys kernel
Is it difficult to add the following lines?
Abels2 said:
I want to apply support for exfat cards I understand that it must be under your kernel which is GeniSys kernel
Is it difficult to add the following lines?
Click to expand...
Click to collapse
You have not explained what you intend to do.
Do you want to compile ROM or make a ROM port?
If you want to compile a ROM, read the TeslaOS sources and direct the questions directly to Ground Zero ROMS Q&A.