Related
Hi everyone, this is my first post. I am one of those who waited patiently for 2.2 that I decided to finally root today. I followed all the instructions to root from the sticky here. The process went without a hitch and I flashed the jk6 stock from Team Whiskey from the development section.
I really enjoyed the 2.2 experience while it lasted until I flashed the JL5+voodoo kernel from supercurio's thread. I was under the impression that you could flash different kernels over the old ones. It went through the process of partitioning to ext4. Once it was done, I went to settings and about phone to see if there was JL5 anywhere and it wasn't. It still showed JK6. So I panicked. I disabled voodoo through clockwork recovery and went to the process of reverting back to rfs which I believed. I used odin to flash back to jfd. I know, I didn't restore the backup from clockwork because I wanted to start over( I still have those backups on my external sd card). To my knowledge, the flashing to jfd would completely wipe the data, replace the baseband, kernel, recovery and os.
I then used samsung kies mini to update to JI6. Everything went ok so I decided to root again. Instead of loading the update.zip to internal sdcard. I decided to use tga_gunnman once click root. That process went great until went it rebooted, the clockwork recovery screen popped up to my amazement. It seemed that there were still original files since the first time I rooted. I checked my files on my vibrant to find that I still had original files such as the clockwork back up, titamium back up, and even voodoo. I thought the flashing would completely remove all the data and files. So I panicked again. At this point, I don't know what I did that now I can't get to my log in screen and the screen I get is a picture of a phone, an exclamation, and a computer on my phone. I tried using odin again through download mode to go back to stock but under the message box on odin, it stops at cache.rfs. It has been stuck there for a long time and nothing is happening. I can't even get into recovery mode either.
Now I am not even sure if I properly disabled voodoo or deleted it which I thought the flashing back to jfd would do. I don't know if my partition is still rfs or ext4. I can't use my phone at all. Did I completely brick my phone? How do I fix the mess I got myself into? I really do appreciate anyone's help. I apologize for the length of this post. I wanted to be detailed as possible. Thank you.
EDIT: Spoke too soon. I used a different version of odin and now im back to stock jfd, but the original files are still there including the voodoo folder. I thought it wipes all the data. Also how do I know that the data partition is originally rfs and not ext4? I want to make sure before I root again. Thanks.
Can you get to recovery and restore your backup you created? I just read where you said you can not get in to recovery. What method are you using to try to access recovery?
well if you are back to stock, but just the folder is lingering around, cant you just reformat your sd card?
settings>sd card phone storage>format.
I did a back up using clockwork. I originally was trying to do to the recovery mode by pressing the vol keys and power and that didn't work. I actually got it back to stock jfd by using a different version of odin. My problem now is that I still have some original files on my phone including the voodoo folder. My understanding of flashing was that it wipes everything from your phone. I am not sure if i still have root access even after flashing back to stock jfd. Also if my partition is back to rfs or still stuck at ext4. I am a little confused here. I am afraid if i root again that the original files and folders from my first root will interfere with the new root method.
so If I format the internal sd card, will it completely erase all traces from my first root?
neotoky said:
I did a back up using clockwork. I originally was trying to do to the recovery mode by pressing the vol keys and power and that didn't work. I actually got it back to stock jfd by using a different version of odin. My problem now is that I still have some original files on my phone including the voodoo folder. My understanding of flashing was that it wipes everything from your phone. I am not sure if i still have root access even after flashing back to stock jfd. Also if my partition is back to rfs or still stuck at ext4. I am a little confused here. I am afraid if i root again that the original files and folders from my first root will interfere with the new root method.
Click to expand...
Click to collapse
When you flash a new rom, or back to stock, it does not (usually) wipe the contents of your sd cards (internal or external). And if you are successfully running stock 2.1, you can rest assured you're back to rfs - so if that voodoo folder is making you nervous you can just delete it (it's only relevant if you have voodoo enabled). You're fine to re-root with whatever method you prefer.
Sounds like the soft-brick you experienced was purely from odin hanging on you, and that icon you saw has become a frequent visitor on my phone since I routinely have odin hanging issues (hence my avatar). I've found that v1.3 treats me the best, but sounds like whatever version you updated to worked, so there's no reason to deviate.
Download OCLF from the market and you will find out if you are currently rooted still.
There are a few misconceptions on what the wipe is.
/sdcard and external SD card are user accessible areas of the phone, and when it states that the ROM wipes your phone it does not touch these (there was only one incarnation of TW ROM's that inadvertently formated the entire filesystem for some users).
If you must format the phone to its complete stock form in ODIN you can use re-partition check box - the results are still mixed if it formats the entire FS or not, but most probably it will for you. So all your pictures, etc. should be backed up no matter what.
I appreciate the help guys. Thanks very much. The version of odin I used originally was v1.00 and the one I used to fix the problem was v1.70. My question now is did I properly flash the JL5 kernel over the JK6 even though when I checked the information on my phone it still stated as JK6? Also how do you properly reflash to a different kernel as well as modems? Do you overwrite the kernel or do you have to go back to stock before trying a new one? Thanks.
neotoky said:
I appreciate the help guys. Thanks very much. The version of odin I used originally was v1.00 and the one I used to fix the problem was v1.70. My question now is did I properly flash the JL5 kernel over the JK6 even though when I checked the information on my phone it still stated as JK6? Also how do you properly reflash to a different kernel as well as modems? Do you overwrite the kernel or do you have to go back to stock before trying a new one? Thanks.
Click to expand...
Click to collapse
I'm not sure why you would flash the JL5 kernel. Does it have any added benefit over the JK6? If you want, you can flash the JL5 MODEM through clockwork using the JL5_modem.zip file posted in many threads.
You should not have to go back to a stock kernel before trying a new one, but if you flash a Voodoo kernel that converts your system to ext4, then you must convert it back to RFS before flashing another kernel. An easy way to be postively sure that you are in RFS is by getting "Terminal Emulator" from market, and type "su" press enter, and then "mount" and press enter. If you see rfs next to data, dbdata, datadata, and system, then you know your system is converted back to RFS. Otherwise, in Voodoo mode it will read ext4 next to those.
Also, if you are really paranoid about getting a fresh start, you can mount your internal SD on your computer and just delete everything on there. Don't worry, all the important Android system files will be restored upon each reboot. All the other crap on there will be erased.
Hi everyone. I had a few questions about flashing new roms on my kindle and was hoping to get some help
1. If I flash a new rom, like cm7, will i need to use titanium back up to save my apps and data. I remember doing this when i flashed a rom for my phone.
2. will flashing to cm7 prevent me from receiving OTA updates that amazon sends out. They just recently sent one a few days ago and the update unrooted the kindle. I wanted to see if I this is something I would have to worry about if i flash to cm7
3. once i do flash to cm7 and say another rom comes out, can i flash straight to the new rom or do i need to flash back to stock then perform the flash for the new rom.. again i remember having to do this when i was changing roms with my phone.
4. does the battery need to be fully charged before flashing
5. If i flash to cm7 then want to go back to back up (amazon stock software with root and gapps) will this make me loose my root access and twrp 2.0
Thanks
babbabooey97 said:
Hi everyone. I had a few questions about flashing new roms on my kindle and was hoping to get some help
1. If I flash a new rom, like cm7, will i need to use titanium back up to save my apps and data. I remember doing this when i flashed a rom for my phone.
2. will flashing to cm7 prevent me from receiving OTA updates that amazon sends out. They just recently sent one a few days ago and the update unrooted the kindle. I wanted to see if I this is something I would have to worry about if i flash to cm7
3. once i do flash to cm7 and say another rom comes out, can i flash straight to the new rom or do i need to flash back to stock then perform the flash for the new rom.. again i remember having to do this when i was changing roms with my phone.
4. does the battery need to be fully charged before flashing
5. If i flash to cm7 then want to go back to back up (amazon stock software with root and gapps) will this make me loose my root access and twrp 2.0
Thanks
Click to expand...
Click to collapse
1. If you are coming from another rom, then yes. But if you are updating your CM7, then you should probably backup your apps
2. I have had CM7 on my Kindle for like 2 weeks, and have not received an update. So I don't think so.
3. Like I said above in number 1. For example: If you are coming from Cm7 and want to try to flash ICS, then you would first backup your system, then wipe system, data, cache and Dalvik-cache, just to make sure. But if whistlestop releases a new version of Cm7 that fixes the MAC adress, then you would boot into recovery, A backup is optional but is recommended., then wipe cache and Dalvik-cache only, then flash the updated rom on top of it.
4. It says that it is recommended to have a full battery, but I have not yet flashed a rom with a full battery, and I have not occured problems.
5. I think if you get an OTA update after flashing back to stock, then you will probably loose root access again and TWRP. But don't worry, after you get TWRP back, you will still have all your backups.
AWESOME! Thanks for all your help.
one more for you. so i just rooted and installed twrp and did a system back up. then i want to flash cm7. now i am running cm7 and decide to try ics so i do another back up before i flash to ics, will the cm7 override the original back up that i did before flashing cm7 or will i now have 2 different back ups i can restore if i wanted too.
babbabooey97 said:
AWESOME! Thanks for all your help.
one more for you. so i just rooted and installed twrp and did a system back up. then i want to flash cm7. now i am running cm7 and decide to try ics so i do another back up before i flash to ics, will the cm7 override the original back up that i did before flashing cm7 or will i now have 2 different back ups i can restore if i wanted too.
Click to expand...
Click to collapse
There will be 2 different choices when you go to restore. But the problem is that when you make 2 backups the same day, its hard to tell which is which. So when I make a backup I mount USB with the option and rename the 12-27-11... file to something like CM7-12-27 or something of the sort.
Sent from my LG-VM670 using Tapatalk
Thank you sir
So.. After owning this phone for a year, I still love it to death..
But after many roms and such its been kinda slowing down on me..
what I would like to do, because I heard it helps a lot, is to revert back to the original software, then put a rom on fresh..
I'm running Synergy Rom now.. And it just locked on me.. It keeps rebooting, so I figure now is the time I do this..
Questions..
I will no have to lose my root? right?
How do I do this now? I'm using clockwork and assume I put the original rom(or zip?) on my sdcard, then go into recovery, and run it?
Correct?
I also ran a script file (v6supercharged)
I assume I will have to redo that as well?
Thanks guys!!
Have no phone right now, so would like to get started asap..
Again!! MUCH THANKS!!
As long as you fully wipe using Amon Ra, you should be able to make most updated ROMs run fast on your phone. Perhaps try reflashing Synergy. I also recommend flashing a new ROM, but reinstalling apps without data. Perhaps that is contributing to the sluggishness.
Sent from my PC36100 using XDA App
Thanks.. But I've been told over and over, its sometimes good to revert back to stock..
Wipe/clear, Install stock rom (or its an .exe. or something?) then wipe/clear again, and put the rom on..
Anyone have the stock file??
Do I let it update or no ??
fastfed said:
Wipe/clear, Install stock rom (or its an .exe. or something?) then wipe/clear again, and put the rom on..
Click to expand...
Click to collapse
That's ridiculous. A wipe is a wipe.
In fact, using the RUU (.exe) is riskier since it flashes radios and such, and if something goes wrong during, you have a bricked phone. Just do a full wipe including cache/dalvik cache and install your ROM of choice, along with a good kernel.
fastfed said:
So.. After owning this phone for a year, I still love it to death..
But after many roms and such its been kinda slowing down on me..
what I would like to do, because I heard it helps a lot, is to revert back to the original software, then put a rom on fresh..
I'm running Synergy Rom now.. And it just locked on me.. It keeps rebooting, so I figure now is the time I do this..
Questions..
I will no have to lose my root? right?
How do I do this now? I'm using clockwork and assume I put the original rom(or zip?) on my sdcard, then go into recovery, and run it?
Correct?
I also ran a script file (v6supercharged)
I assume I will have to redo that as well?
Thanks guys!!
Have no phone right now, so would like to get started asap..
Again!! MUCH THANKS!!
Click to expand...
Click to collapse
If you rooted with unrevoked or revolutionary, you will need this file to return to stock, and yes, you will temporarily lose root.
http://dl.dropbox.com/u/38127313/Un....15.00.0808_NV_2.15_release_220182_signed.zip
Change the name to PC36IMG and run it from the root of your SD card through the bootloader. You will lose your root, but your security flag should still be off (S-OFF) so that you can quickly regain root after running this file, after changing it to PC36IMG in place of the first one. (It is Amon-RA and not clockwork. You can reflash clockwork later if you want, which I don't recommend.
http://dl.dropbox.com/u/38127313/Root 2.3.3/PC36IMG3.08.zip
Also, you might need to flash a superuser app, in case you need root inside the stock ROM. Here is an old one, but it should still work for you.
http://dl.dropbox.com/u/38127313/Root 2.3.3/su-2.3.6.2-efgh-signed.zip
Like the previous users said, it's probably not necessary, but I'm just giving you what you asked for.
hmmm.. so now its not necessary ? I was always under that impression..
Ok..
Anyone know what the new HOT rom is ??
Gigerbread please ?
Like I said I was using Synergy..
Used Fresh before and a couple others..
whats the hot rom ??
FYI I also partitioned my SD card, or whatever its called.. For the gigerbread thing..
Put MikG 3.0 on it and call it done. Rock solid ROM, great battery life, and awesome tweaks built in. It will be like an all new phone. Enjoy
Sent from my PC36100 using xda premium
This is why I stress making a nandroid of your stock/rooted immediately after Rooting.
You may want to simply reformat your SD Card. I've been having a few issues and realized it's been months since I cleaned up and reformatted/repartitioned my SD Card, so I plan on doing that tomorrow and flashing a new ROM
Use "Best Method" for Cleanest way (Wiping)
OLDER: Froyo v2.2 (3.70.651.1) http://keetsa.com/files/RUU_SuperSo...15.00.11.19_NV_1.90_release_161482_signed.exe
Most Current version is "Gingerbread v2.3.3 (4.54.651.1).EXE" http://www.multiupload.com/LLV12N2WU8
with "xxx.EXE file", You'll need to Run it on Widows and install on Phone thru Micro USB plug.
BEST Method to install Most Current STOCK ROM:
1. Download + Rename to "PC36IMG.zip" on SDCARD + (Boot into Recovery +Install) "AmonRa Recovery v3.11-gnm" http://dl.dropbox.com/u/34586908/PC36IMG-ra-supersonic-3.11-gnm.zip
2. (Boot into Recovery), WIPE these 8 lines (All data/factory Reset, /data, /cache, /sdcard/.android_secure, /system, Dalvik-cache, battery stats, rotate settings)
3. Download + Rename to "PC36IMG.zip" on SDCARD + (Boot into Recovery +Install) "GB v4.54.651.1.ZIP" http://db.tt/Ck6AB18E
If you want non Stock Recovery + Rooted:
1. Rename your "(AmonRa Recovery v3.11-gnm) PC36IMG.zip" to "PC36IMG.zip" again. (Boot into Recovery +Install). (cus Stock Rom changed you to STOCK Recovery)
2. (Boot into Recovery + Install) "Root (Superuser-3.0.7-efghi-signed).zip" www.mediafire.com/?16a07x3800wvak6
No need to revert to stock.
Use vr superwipe
Save the contents of your sd card to a computer, then reformat the sd card
Wipe everything on the wipe menu, then flash a new ROM.
copy the titanium backup directory back to your sd card and restore apps without data first, then restore data of any games or what not.
Problems should be fixed.
Sent from my PC36100 using Tapatalk
You have a lot of options here. As the preceding posts may have eluded to. Depending on how consistent and deep your issues are, there are different steps that need to be taken.
You can always wipe the ROM and reflash. Do a dirty flash, by just wiping cache and dalvik, then reflashing. That tends to be my temp work around sometimes.
Worst case I've seen is reverting to stock. Unrooting. And starting back over.
With any new ROM you'll need to reflash your mods. Becareful tho of what mods you're using. Not all are compatible across the board.
HipKat said:
This is why I stress making a nandroid of your stock/rooted immediately after Rooting.
You may want to simply reformat your SD Card. I've been having a few issues and realized it's been months since I cleaned up and reformatted/repartitioned my SD Card, so I plan on doing that tomorrow and flashing a new ROM
Click to expand...
Click to collapse
Did reformatting the SD card help? I just realized and did the same thing. It had been a good 3-4 from changes and about a year since I formatted my card.
It helps a lot. I reformat mine about every 3-6 months
Swyped From The Hippest MIUI'd phone Using XDA Premium
Can someone please explain to me how to go from Bionix 1.3.1 to ICS? I have read a lot (perhaps too much) about GB bootloaders, etc. but am not sure what is required.
Do I need to have a GB ROM installed before going to ICS?
I have also seen guides for going from 2.1 to ICS, but that is not my situation.
I guess my main area of ignorance is that I have never flashed any bootloader of any kind.
If I go to ICS and want to restore my Froyo backup do I need to flash a bootloader before I do that?
Obviously I'm confused about the whole process.
Thanks for any clarification you can give me.
See my guide to go from 2.1 to ICS and one if the top lines tells you how to go from Froyo to ICS.
GB bootloaders are no longer needed but suggested. Probably the only scary part of the whole process, but it is actually the easiest.
CM7 needed before ICS or not?
From a post in the same thread as your guide:
"
If you want a stable 2.2 try Toxic8 (I run this with Gingerbread theme as my "home" ROM when I am not testing), Deranged9, Bionix (no longer supported) and Bionix Fishman's version (this is supported), Bi-winning. All you have to do to flash these is follow the instructions above and when it comes time to flashCM7, skip it and flash the ROM of your choice."
Does this mean that if I have Bionix already that I don't need to go to CM7 before ICS?
There are a couple of ICS Roms where you can come from froyo. You have to probably flash it twice to get into the specific cwm.
To get back to you bionix, you have to use Odin to get back to stock.
rblancrt said:
From a post in the same thread as your guide:
"
If you want a stable 2.2 try Toxic8 (I run this with Gingerbread theme as my "home" ROM when I am not testing), Deranged9, Bionix (no longer supported) and Bionix Fishman's version (this is supported), Bi-winning. All you have to do to flash these is follow the instructions above and when it comes time to flashCM7, skip it and flash the ROM of your choice."
Does this mean that if I have Bionix already that I don't need to go to CM7 before ICS?
Click to expand...
Click to collapse
This is from a different thread in a different context. Someone was asking how to flash a custom ROM, IIRC.
If you want ICS, you have to flash CM7 first, let it bootloop, pull the battery, reflash and then once it settles, flash ICS.
Also, don't apologize for being detailed or thinking that you are reading into too much, Wished more were like this.
From the Guide
This is for a clean install. You can also install straight from Froyo. Just start at the CM7 part below and skip the Odin portion.
Click to expand...
Click to collapse
so any luck with getting to ICS from bionix 1.3.1...cause im still in the same spot...and im very wary as to what to do as well...so if any luck...please let me what you did...
I just did it
If you follow the instructions in the Passion ICS thread it's pretty straightforward. I had never used Odin before even though I had flashed Bionix almost a year ago. I'm not a phone guru, just somebody who likes to mess with these custom ROMs.
These steps are high level, you can find specific links in numerous places.
Here's what I did:
- Download Odin
- Download the required files to flash the phone back to stock 2.1 (.pit file and .tar file)
- Backup apps with Titanium (don't bother backing up the system it's different in newer versions anyway and all you'll have is trouble if you try to restore system settings)
- Backup anything else you feel is important on your internal and external SD cards
- Use Odin to flash the phone back to stock
- Root the phone (using the update.zip technique)
- Install clockwork recovery (I found an update.zip for this too)
- Flash the Cyanogenmod version of ICS (no longer under development but you need it for the boot loaders). You will likely encounter a boot loop in this process. Don't panic, just pull the battery once it loops a few times. Boot back into recovery and flash again.
- From this point you can now flash ICS using clockwork, following this you can restore your apps with Titanium if desired
ICS totally rocks by the way. I've been using Passion v13 RC1 for a week now. Tried the newest one Euphoria but it didn't work out for me.
I have to admit that I never tried ICS. I have been using an ICS theme for a long time so my phone looks like it has ICS on it. I was also leary of the mute/unmute problem I had read about and wasn't sure about how well good GPS was.
I've been testing out the ICS that is to become CM9 with the latest build being 16 found at http://forum.xda-developers.com/showthread.php?t=1503038
It's really stable... granted not everything is implemented such as a number of the settings screens. But I was on CM7 when I installed it so I was able to just flash it direct.
atatistcheff said:
If you follow the instructions in the Passion ICS thread it's pretty straightforward. I had never used Odin before even though I had flashed Bionix almost a year ago. I'm not a phone guru, just somebody who likes to mess with these custom ROMs.
These steps are high level, you can find specific links in numerous places.
Here's what I did:
- Download Odin
- Download the required files to flash the phone back to stock 2.1 (.pit file and .tar file)
- Backup apps with Titanium (don't bother backing up the system it's different in newer versions anyway and all you'll have is trouble if you try to restore system settings)
- Backup anything else you feel is important on your internal and external SD cards
- Use Odin to flash the phone back to stock
- Root the phone (using the update.zip technique)
- Install clockwork recovery (I found an update.zip for this too)
- Flash the Cyanogenmod version of ICS (no longer under development but you need it for the boot loaders). You will likely encounter a boot loop in this process. Don't panic, just pull the battery once it loops a few times. Boot back into recovery and flash again.
- From this point you can now flash ICS using clockwork, following this you can restore your apps with Titanium if desired
ICS totally rocks by the way. I've been using Passion v13 RC1 for a week now. Tried the newest one Euphoria but it didn't work out for me.
Click to expand...
Click to collapse
This method works great! I used this last week and had some trouble with boot loops. But nothing that can't be fix with removing the battery. I suggest finding the youtube video that is on the ICS Passion thread. The person does it on real time, so you can follow along as you do it.
I love ICS passion. It is as smooth or even smoother than Bionix.
mikesdot said:
so any luck with getting to ICS from bionix 1.3.1...cause im still in the same spot...and im very wary as to what to do as well...so if any luck...please let me what you did...
Click to expand...
Click to collapse
Just follow instructions in OP of attached link and your good.
-Download ICZen and place it on your internal sd
-Reboot to Clockwork Recovery
-Perform a wipedata/factory reset
-Go to mounts and storage and format the system partition
-Flash your downloaded ICZ rom file
-From the main menu of recovery, perform a wipedata/factory reset again
-Reboot
-On bootup, give it a few minutes to settle in, reboot and use as normal.
-Enjoy your ICZen!
http://forum.xda-developers.com/showthread.php?t=1499455
No need to have GB boots and if you want to go back,odin to stock to reflash Bionix and then your nandroid.
This is a great ICS rom and I'm a huge Bionix fan,with a 1.3.1 and 1.3.1 Fishman final nandroid backup.
I flashed Passion ICS rc13 on 2 Vibrants, one from Bionix 1.3.1 and another from trigger 2.2 and skipped some steps (like GB bootloader) and they are working just fine.
My steps:
1. Wipe data/factory reset
2. Flash CM GB.
3. Wipe data/factory reset
4. Flash Neobuddy ICS
5. Flash kernel.
6. Let the phone boot, sign up and do its setup.
All in all, took maybe 30 minutes first phone and 20 min second phone once I got more comfortable.
bionix 1.31 striaight to CM7 then on to ICS?
Do you have to go back to stock? Why couldn't you just flash to CM7 then go on to ICS? I am on Bionix 1.31 and this process just seems easier.
rblancrt said:
I have to admit that I never tried ICS. I have been using an ICS theme for a long time so my phone looks like it has ICS on it. I was also leary of the mute/unmute problem I had read about and wasn't sure about how well good GPS was.
Click to expand...
Click to collapse
I think mute/unmute is hit or miss. But if you are worried about or need GPS, dont flash an ICS rom.
Also, when upgrading fro 2.2 -> 4.0, take out your external sd card prior to that! It might cause a bootloop when flashing the initial CM7 rom. I happened to me and also other people on youtube (where I found out, was the source of the problem)
---------- Post added at 03:27 PM ---------- Previous post was at 03:27 PM ----------
licktheback said:
Do you have to go back to stock? Why couldn't you just flash to CM7 then go on to ICS? I am on Bionix 1.31 and this process just seems easier.
Click to expand...
Click to collapse
Yep you can, just make sure you make a back up and clear all data
licktheback said:
Do you have to go back to stock? Why couldn't you just flash to CM7 then go on to ICS? I am on Bionix 1.31 and this process just seems easier.
Click to expand...
Click to collapse
It's mainly to get rid of any ghosts left from other roms to avoid any bugs not caused from the rom you install and avoid giving a rom a bad review without giving it a clean canvas to start with.
powered by ICS Euphoria
Hey guys,
I recently tried flashing the Team Hacksung ICS port, Gummy Fascinate, and AOSPK and they all have the same issues for me. I understand that these are in an alpha state but none of the "Not Working" sections include the problems I am having. First, I cannot receive text messages but I can send them. Second, when exiting an app or the settings menu, the home screen takes five seconds to reset (all of the icons/dock are gone, only the wallpaper shows at first). Third, the launcher becomes incredibly slow after only a few minutes. I close out of all of the apps that are running using the new multitasking feature (holding the home button) but the phone remains sluggish until I reboot it. Then, it is lightning fast until I open any app. Fourth, scanning of my SD card seems to stop after a few seconds after booting. I have about 14 GB of music on my SD card and it only loads the first few artists. It does this every time I boot up so I can never see the entire library. Fifth, sometimes the app I am using will close and I am forced to wait for the home screen to reset, as I mentioned before. No error messages for force closing appears. Sixth (this is only a minor inconvenience but I want to understand why it happens), when I use SMS Backup + to restore my texts, the minute I leave the app or let the screen turn off, it returns to "Idle mode and I have to restart the entire process over again.
TL;DR I have a bunch of issues that other users don't seem to be having and they are not listed on the "Not Working" sections of the ROMs.
I would appreciate if anyone could help me come up with a solution to any one of these problems. I am looking forward to using ICS!
What method are you using to install ics based roms?
I flash back to stock EH03 and then follow these directions to the letter: http://exzacklyright.blogspot.com/2012/01/how-to-flash-ics-on-verizon-samsung.html
Those instructions are pretty good aside from the part in step 8 that suggests flashing the radio. It's already included in the EH03 package so it's just redundant, but those instructions are essentially the same as my procedure and I'm on build 6 without the issues you're experiencing (as are other people).
I'm curious if you have the same problems on other roms or is it just ICS? Have you ever messed around with overclocking and maybe got a bit aggressive? I know that if you're not careful and know what you're doing with the new overclocking and voltage control that are a part of glitch v14 you could certainly damage your phone. If it's just ICS roms and you've never messed with OC, I'm not really sure why you'd be running into those issues.
smokinbeanbean1992 said:
I flash back to stock EH03 and then follow these directions to the letter: http://exzacklyright.blogspot.com/2012/01/how-to-flash-ics-on-verizon-samsung.html
Click to expand...
Click to collapse
have you tried a different sd card?
I only have these problems on ICS. I don't flash EH03 everytime like it suggests in the instructions. My last SD card was fried by CM7 so this SD card is brand new and I'm pretty sure it's a class 10, so speed shouldn't be an issue. Could it really be the SD card that's causing these problems?
Sent from my SCH-I500 using XDA App
Also, I have messed around with glitch v14 and overclocking to attempt to alleviate the sluggishness and I used to use v12 and v13 with CM7 before with no issues. V14 did not help at all so I'm on the stock CM9 kernel and I have erased the voltage settings.
Sent from my SCH-I500 using XDA App
smokinbeanbean1992 said:
I only have these problems on ICS. I don't flash EH03 everytime like it suggests in the instructions. My last SD card was fried by CM7 so this SD card is brand new and I'm pretty sure it's a class 10, so speed shouldn't be an issue. Could it really be the SD card that's causing these problems?
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
I didnt say it was the sd card, just simply asked if you have tried another...relax grasshoppa. If you dont follow instructions expect stuff not to work right.
Not sure if it will make a difference, but I ODIN and repartitioned to stock verizon DL09.. then CWM, wipe, build two, wipe, gummyfassy...
I have run into some strange issues when I reverted to another stock verizon package other than DL09 before flashing custom roms.. so out of superstitions sake, I always default to DL09.
elarson006 said:
Not sure if it will make a difference, but I ODIN and repartitioned to stock verizon DL09.. then CWM, wipe, build two, wipe, gummyfassy...
I have run into some strange issues when I reverted to another stock verizon package other than DL09 before flashing custom roms.. so out of superstitions sake, I always default to DL09.
Click to expand...
Click to collapse
I use to have to do the same thing when I was on the stock sd card. Pretty sure the op did not odin back to stock anything going by his last post. I agree tho it wouldnt hurt to try stock ed05 or dl09, but dl09 should no longer be necessary.
I wasn't angry or anything, I was just wondering if the SD could be a problem. I always flash back to the stock EH03 ROM before flashing ICS or CM7 but do you think I should go all the way back to DL09?
Sent from my SCH-I500 using XDA App
I don't think it would harm anything to go to a more previous version. Make sure you repartition using the .pit file when flashing in ODIN if coming from MTD rom
Every time i tried all the ICSs I odined to EH03 as my starting point, then odined CWM4 fixed for CM7, then I flashed ICS Hacksung 3 first......Reboot...Reboot into recovery, Flash ICS 6 [or what ever new flavor you would like] then flash Gapps 7.1....Reboot.... Enjoy
Start from scratch and you will be good to go.
Droidstyles is the man when it comes to guides!
Ok, so at what point do you personally wipe data/cache/dalvik? I flash to stock, flash CWM fixed, wipe all three, install THS build 2, reboot, wipe all three, flash ICS rom of choice, flash all three, install gapps 7.1, and reboot.
Sent from my SCH-I500 using XDA App
usually before you flash a full rom:
Odin EH03
LET THE PHONE BOOT
pop battery
Odin CWM4 for CM7
[three finger salute]
Wipe the three
Flash THS 3
Let Phone boot, then reboot to recovery using the power button [DO NOT 3 finger!!!!]
Wipe the three
Flash THS 6 [or any of the others, you dont need to flash all three just which ever your end game is, i recommend THS 6 not 6.1 for starters]
*No need to wipe or reboot in between these two*
Flash Gapps 7.1
Then reboot and enjoy
Ok I'll give that sequence a shot. Thanks for your help everyone!
Well I don't know what it was but my phone is working flawlessly now. Thanks again everyone!
There is a thanks button for this...
Ah yes, I forgot about that
smokinbeanbean1992 said:
Ah yes, I forgot about that
Click to expand...
Click to collapse
Pretty sure your issue came from wiping the 3 after you flashed ics.
Should go like this
after flashing build 2
Wipe the 3
Flash your choice ROM
Flash gapps
Reboot
Sent from my SCH-I500 using xda premium