The flex cable that connects the LCD to the main board in my P7100 is damaged and it's proving impossible to find it anywhere.
If anyone is willing to put to use any bricked P7100 they may have, I am interested in buying it for a fair price even though I only need the cable.
Please contact me by PM if you have such a device.
Thanks.
PS: If anyone knows where this cable can be purchased from, that would even be a better solution for me
Related
Hi,
My mini-B usb female connector (for charging and usb connectivity etc) is broken...
I need to find a replacement,
but I don't know what model it's exactly..
I don't what to end up ordering something I can't use :]
Can anyone help me?
Thanks!
What is the Make/Model of your phone. Either you can send it to the original manufacturer/vendor if still under warranty or you can order from ebay.First know the maker and model No # of your phone like T-mobile,cingular,i-mate or At&tt etc and model like T-mobile MDA,vario, etc etc,ok
Cheers !
I have mine from www.techcenter.fr
It's an HTC Wizard, Wiza200. (Qtek in fact)
Looking for a replacement USB port for your Apache or Wizard?
Go to:
http://www.mouser.com/catalog/629/979.pdf
You're looking for "D" in the pic's (Mouser Stock No. 538-67503-1020)
I have purchased them, they fit perfectly!
Good luck
bioChaz-
My USB connector is broken as well. Have you replaced one yourself? I want to know how hard it would be to do, because I'm thinking of ordering the part and attempting it.
what about ppc techs. they repair and sell that part.
I've done it a bunch of times...it definitely takes a few trys before u get it right...if ur familiar w/ soldering then it should be fairly easy, but if not...it might be worth paying some one to do it for u...if the pads are ripped from the motherboard then they have to be retraced...that is even harder...then it is worth paying to have it fixed for sure...otherwise, there is always the upgrade
upgrade? i wish. bought mine off the streets. thanks
bioChazTBO said:
Looking for a replacement USB port for your Apache or Wizard?
Go to:
http://www.mouser.com/catalog/629/979.pdf
You're looking for "D" in the pic's (Mouser Stock No. 538-67503-1020)
I have purchased them, they fit perfectly!
Good luck
Click to expand...
Click to collapse
I knew I'd be able to get this part from DigiKey/Mouser, but I was just never sure which was the right one so I never bothered.
Thanks!
Help, the mini usb port (plug) in my tilt has broken, and I cannot connect the phone to my pc. I am living in Venezuela where this phone is not in the market, and I cannot find the spare part. Who can tell me where can I buy one?
thanks for the help
Here is a service to fix it however it requires you to mail your phone to them. Its USD $79.00 and that includes parts and labor.
http://www.pocketpctechs.com/main~u...Kaiser+Sync+Connector+Replacement+Service.htm
Thanks a lot i wrote them tring to buy only the spare part since it is a trouble to me sending the phone to USA.
If anyone else can give to me further addresses I will apreciate it.
Hi there!
I'm trying to replace the mini-USB charger port in my hd2 but havent had the chance to open the phone yet and trying to buy components. which part do I need for it? a 5-pin or 8-pin?
I am currently awaiting for my torx screw drivers to come through the post and preparing all the parts I need. So far, I have not found any site that has showed how to fix this on the HD2.
My plan is to purchase the mini-USB port, open my phone up and solder in the new port. Has anyone attempted this yet successfully?
I also posted a response to this in the "Arrow
[FAQ] Q&A: How? Where? what? Ideas? [New Users?]" thread you posted this in. The HD2 has a 5 pin micro USB port, it is soldered to the bottom of the main board. I have read post of people having success with replacing it and I have also read post saying it is not just a easy task unless you are good at soldering. Good luck.
thanks! (my apologies for double posting). from what i've read so far on people trying to replace these parts on the internet, it's a lot easier if you used a dremel to cut off the rear shielding of some sort.
i think my screen needs replacing along the way but i wanna get the charging port working first
off to order some parts off ebay now
In hackaday there's an article on replacing usb ports.. I cant post it but I can send it over by PM if you want
By the way, do you mind posting some photos of the HTC HD2' usb port when you open it? I never opened mine but I need to change the usb port too.. so any intel I can get in advance.. the better ;-)
ok so i have be having trouble connecting my phone via usb to the computer. After 6 months of this problem and reading multiple solutions online i decided to replace my usb port for a second time thinking it was a defective port. Turns out their is a transistor on the back side of where the usb ribbon connects to the motherboard which looks to be damaged. Anyone know of a place where i could get this repaired. I'm in CT but any trust worth places would be appreciated.
I would recommend looking into this place. They untucked abd unlocked the gsm on my note 2. Very nice, very helpful. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-3-jtag-brick-repair/
combined Delpfro
talonzme said:
I would recommend looking into this place. They untucked abd unlocked the gsm on my note 2. Very nice, very helpful. http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-3-jtag-brick-repair/
Click to expand...
Click to collapse
Thank you sir the site looks legit. Thank you for your speedy reply.
No problem. They treated me right.
I unfortunately broke my antenna flex cable, now no network in my phone. After searching all around online sites (India),I could not find the replacement.
That's y any expert / techie , kindly help me. Will antenna flex cable for other phones such as Samsung note 2 is going to work? . or if there is any, let me know.
Anybody ...I am in desperate need for above help.
From aliexress it will take more than a month n sometime never get delivered.
Help