Database Users

[Prep]Undervolt

Just a place for people to post stable undervolt settings that they are using. I haven't had a chance to test any out yet...
Sent from my MB860 using Tapatalk

-50 on all clocks

Magnetox said:
-50 on all clocks
Click to expand...
Click to collapse
Stable? I tried knocking 100 off of each level. No dice, reboot every time.

Pushed -50 on all and ran quadrant to stress. All good so far
*edit* tried at 75 and got a reboot. Put top 3 at 50 and the rest at 75 and it completed fine.
*edit2* on kens 4.5 beta and fauxs 0.1.2 kernel oc'd to 1.1
Sent from my MB860 using XDA Premium App

State with kernel and software you're using.
I'm on edgar's kernel with SetCPU
just put a -50 on all clocks to see how it goes.
Just correct me if im wrong.. undervolting tends to save battery but heats a bit more, isnt that right?

Viamonte said:
State with kernel and software you're using.
I'm on edgar's kernel with SetCPU
just put a -50 on all clocks to see how it goes.
Just correct me if im wrong.. undervolting tends to save battery but heats a bit more, isnt that right?
Click to expand...
Click to collapse
Less voltage should mean less heat.

Which kernel are you guys using to undervolt?
Sent from my MB860 using XDA App

Umm... faux specifically stated that his OC kernel had heat issues because he simultaneously overclocked and undervolted. I might have misinterpretated that, but I have zero understanding of physical consequences to clock control. Ah well...

d11dog11 said:
Pushed -50 on all and ran quadrant to stress. All good so far
*edit* tried at 75 and got a reboot. Put top 3 at 50 and the rest at 75 and it completed fine.
*edit2* on kens 4.5 beta and fauxs 0.1.2 kernel oc'd to 1.1
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Have you limited the cpu to the lower levels and stressed it with those as the max and its still stable?
Sent from my MB860 using Tapatalk

Had -50 on all and kept getting reboot.
Tried -25 on bottom 4 got several reboots still trying others.
Ninja rom faux kernel using setcpu
Sent from my [email protected] Atrix - OC 1.1ghz

Bbock9 - I never limited it to the lowers. I can say that with the top 3 at 50 and the rest at 75 it has been good. No issues over night with a 216-216 screen off profile.
Sent from my MB860 using XDA Premium App

I used with no problems so far:
1100 -50
1000 -50
912 -50
750 -50
608 -100
456 -100
216 -150

I am running Alien V4 and Faux123 kernel.

I have had great success with the following undervolt settings using Alien 4 and Faux's 1.6 kernel.

monzttr said:
I have had great success with the following undervolt settings using Alien 4 and Faux's 1.6 kernel.
Click to expand...
Click to collapse
I thought steps >100 are ignored.

rozzco said:
I thought steps >100 are ignored.
Click to expand...
Click to collapse
Yup. The bottom two steps are not being undervolted as shown.

I am running stable with the following:
1100 -50
1000 -50
912 -50
750 -50
608 -100
456 -150
216 -220

Running Alien v4
faux123 1.6 Kernel
UV:
-50
-50
-50
-50
-100
-100
-100
No reboots. 3077 on last quadrant. Also as another user (alcapone something or other, sorry) I have the custom profiles turned on and am using:
Screen Off 456-216
Charging 1100-216
In Call 608-216
Battery <15 608-216
Battery <10 456-216
Found most of this info on the SetCPU undervolt thread. Better battery life so far phone is still relearning stats though.

lurchbyrep said:
Yup. The bottom two steps are not being undervolted as shown.
Click to expand...
Click to collapse
so theres no point in setting UV less than -100?

enomai said:
Running Alien v4
faux123 1.6 Kernel
UV:
-50
-50
-50
-50
-100
-100
-100
No reboots. 3077 on last quadrant. Also as another user (alcapone something or other, sorry) I have the custom profiles turned on and am using:
Screen Off 456-216
Charging 1100-216
In Call 608-216
Battery <15 608-216
Battery <10 456-216
Found most of this info on the SetCPU undervolt thread. Better battery life so far phone is still relearning stats though.
Click to expand...
Click to collapse
can you post a screenshot of your custom profiles? thanks

Undervolt settings.

Im looking for stable undervolt settings I have currently mine set at
1600 Mhz - 1400 Mv
1400 " - 1300 "
1200 " - 1250 "
1000 " - 1175 "
800 " - 1050 "
500 " 950 "
200 " - 850 "
100 " - 825 "
My settings are stable but maybe someone can put out where I can still undervolt and retaining stability.
Im using stock + Siyah Kernel.

I'm not trying to be rude, but it's a bit useless since not every devices can handle the same settings...
And of course you can still undervolt. You will find YOUR best settings when you're at the lowest values and your phone is still stable. If you're going too low, you'll have to reboot the phone and set the voltage a bit higher.
But if you want an idea, mine is running rock solid with these settings :
100MHz @ 825mV
200MHz @ 825mV
500MHz @ 850mV
800MHz @ 950mV
1000MHz @ 1050mV
1200MHz @ 1150mV
I'm also on stock KI8 + Siyah 2.0b6

Keep trying by 25mV
Siyah Kernel
Cognition 1.5.1
100Mhz @ 775mV
200Mhz @ 800mV
500Mhz @ 825mV
800Mhz @ 950mV
1000Mhz @ 1050mV
1200Mhz @ 1150mV
1400Mhz @ 1275mV
1600Mhz @ 1350mV

What exactly constitutes stable? Half an hour on a stability test? 1 hour? 2 hours? a month?

jayquinten510 said:
What exactly constitutes stable? Half an hour on a stability test? 1 hour? 2 hours? a month?
Click to expand...
Click to collapse
Stability Test is crap. Play a game for an hour to see if it's stable.

ithehappy said:
Stability Test is crap. Play a game for an hour to see if it's stable.
Click to expand...
Click to collapse
Haha, normally I would, but my HSC exams start tomorrow :/ Last school exams ever! Hopefully will get me into uni. I was just running stability tests in the background when I was studying, but maybe I will leave it till after the HSC.

skuizy said:
I'm not trying to be rude, but it's a bit useless since not every devices can handle the same settings...
And of course you can still undervolt. You will find YOUR best settings when you're at the lowest values and your phone is still stable. If you're going too low, you'll have to reboot the phone and set the voltage a bit higher.
But if you want an idea, mine is running rock solid with these settings :
100MHz @ 825mV
200MHz @ 825mV
500MHz @ 850mV
800MHz @ 950mV
1000MHz @ 1050mV
1200MHz @ 1150mV
I'm also on stock KI8 + Siyah 2.0b6
Click to expand...
Click to collapse
Good setting....i'm using without problem from 3 days.
Question:
Do you set governor from 100 to 1600mhz or standard 1200?

ithehappy said:
Stability Test is crap. Play a game for an hour to see if it's stable.
Click to expand...
Click to collapse
CPU stress test in setcpu is a goodone. USing the two cores completely for testing, most of the games make use of GPU a lot and some CPU, so playing games alone wont help you in testing the stability.

[CM9][MIUI]Battery life tweaks.[Siyah added]

Guys, i am not expert in this. but as i was facing battery issues too with miui, i came with some tweaks which gave me good battery result....so helping people about battery issues.
So please Don't blame me,if you dont get good results......your settings are crap and all,because i am just helping people.
and i am sure,if you follows all the steps,it will help you also. because i got 250+(pm) positive feedback about this tweaks,so posting here.
SCROLL DOWN FOR CM9
here are some tweaks :-
basics :-
Turn off Bluetooth,wi-fi,3g data connection,GPS when they dont need.....if you dont wanna do it manually,Use Juice Defender(LINK) app. But i will recommend to do it manually,as that app will also consumes some battery
Click to expand...
Click to collapse
Siyah 2.6.9/2.6.11[MIUI GB ONLY]
1.Download siyah 2.6.9 here, siyah 2.6.11 here
2. Download Voltage control app
LINK
2.1 open app
2.2 set cpu min to 100
max to 1000
2.3 i/o scheduler:- BFQ/noop
Governor:- ondemand(with bfq) / CONSERVATIVE (with noop)
2.4 Voltages:
100 - 875mV / 900mV (if it freezes change to alternative)
200 - 900mV / 925mV (if it freezes change to alternative)
500 - 950mv
800 - 975mv
1000 - 1100mV
1200 - 1200mV
1400 - 1350mV
---
GPU:
100Mhz low
267Mhz high
Voltages:
800mv
950mv
AC Charge:
650mA
USB Charge:
500mA
3. Enable Auto Brightness
3.1go to settings>display>advanced mode>enable 'use custom'
3.2 select light level to dim ,select 1
3.3 select edit other levels...
3.3.1 under screen option
choose values:- 15,35,55,75,245
3.3.2 select save settings.
Click to expand...
Click to collapse
kernel which gave, me and some other users good battery life is dk 2.4.3 (Dont use dk 2.5.2)[MIUI GB ONLY]
1.download dk 2.4.3 kernel...... LINK
2. Download Voltage control app
LINK
2.1 open app
2.2 set cpu min to 100
max to 1000
2.3 i/o scheduler:- BFQ
Governor:- intellidemand(If its laggy then switch to ondemand)
GPU:
100Mhz low
267Mhz high
Voltages:
800mv
950mv
3. Enable Auto Brightness
3.1go to settings>display>advanced mode>enable 'use custom'
3.2 select light level to dim ,select 1
3.3 select edit other levels...
3.3.1 under screen option
choose values:- 15,35,55,75,245
3.3.2 select save settings.
Click to expand...
Click to collapse
XCeLL-X69[MIUI GB ONLY]
*Download XCeLL-X69 from this LINK
*Script for this LINK
now follow steps 2 to 3 from Point 2 (i.e dk point) [use Governor:-Conservative/ondemand]
Voltages:
100 - 850mV / 875mV (if it freezes change to alternative)
200 - 875mV / 900mV (if it freezes change to alternative)
500 - 925mv
800 - 975mv
1000 - 1100mV
1200 - 1200mV
1400 - 1350mV
---
GPU:
100Mhz low
267Mhz high
Voltages:
800mv
950mv
AC Charge:
650mA
USB Charge:
500mA
Click to expand...
Click to collapse
For CM9 users :-
1.Download Voltage control app
LINK
1.1 select i/o scheduler:- CFQ
Governor:- ondemand
1.2set cpu min to 200
max to 1000
2.use LP6 kernel ( you can try KP8 also)
3.go to settings>Display>Automatic Backlight
3.1 go to Windows Length, select 10sec
3.2 enable 'Use Custom'
3.3 go to Screen dim level,select 1
3.4 Go to Edit other Level
3.4.1 Under screen option
select values :- 10,25,45,55,85,250
3.4.2 Tap on Save & Apply
Click to expand...
Click to collapse
Let it be charge to 100%, then let is drain below 5%....then again charge it 100%, after this check results
For first charge it will drain fast.after that you will see good battery life.
If it was helpful to you,vote it to 5star
My best result,check attatchment

waiting to fully recharge my phone

Welll84 said:
waiting to fully recharge my phone
Click to expand...
Click to collapse
Let it be charge to 100%, then let is go below 5%.....then again charge it 100%, after this check results
Sent from my GT-I9100 using xda premium

noob question...how do i take sceenshot on my phone...?
since im in diff ROM now...i dont knw how to take SS...lol

Welll84 said:
noob question...how do i take sceenshot on my phone...?
since im in diff ROM now...i dont knw how to take SS...lol
Click to expand...
Click to collapse
Power button and home button
Sent from my GT-I9100 using xda premium

so out of all kernels you would recommend dk 2.4.3. for best battery life... have you compared your findings with void. echo and siyah? siyah was good for battery life before matched with wajkiui but then after updated to latest kernel my battery is dying... void.echo is worse... pls help.. battery life is my biggest problem! will your settings differ for different batteries i currently have a 2000amh.. and switch between the original when one dies... at this rate il need a third battery =_=

Samunoski said:
so out of all kernels you would recommend dk 2.4.3. for best battery life... have you compared your findings with void. echo and siyah? siyah was good for battery life before matched with wajkiui but then after updated to latest kernel my battery is dying... void.echo is worse... pls help.. battery life is my biggest problem! will your settings differ for different batteries i currently have a 2000amh.. and switch between the original when one dies... at this rate il need a third battery =_=
Click to expand...
Click to collapse
As i mentioned in first post miui+siyah dont gave me good battery. About void.echo i faced os drain bug. So for me dk and xcell was best....
First go for dk 2.4.3 and follow all the steps.
Sent from my GT-I9100 using xda premium

Suarez7 said:
Power button and home button
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
It's not that i didnt try...but i cant get it working...Thanks anyway

Welll84 said:
It's not that i didnt try...but i cant get it working...Thanks anyway
Click to expand...
Click to collapse
Which rom you are on??
If you are on miui then :-
Soft menu key(left to hardware key)+volume down key.
Else if you are on other:-
Middle hardware key+power key
Sent from my GT-I9100 using xda premium

Just another point of view i'm running since yesterday, on android 2.36/I900XXKL1 with the last Syah wich is V.2.6.9 and i 've lost 4% of battery from at least midnight to 9.00 am...! have a good night or good day!

gh.rohit said:
Which rom you are on??
If you are on miui then :-
Soft menu key(left to hardware key)+volume down key.
Else if you are on other:-
Middle hardware key+power key
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
That's it...thanks....Im on Miui ROM atm

islander999 said:
Just another point of view i'm running since yesterday, on android 2.36/I900XXKL1 with the last Syah wich is V.2.6.9 and i 've lost 4% of battery from at least midnight to 9.00 am...! have a good night or good day!
Click to expand...
Click to collapse
I didnt get,what you mean to tel us?
Sent from my GT-I9100 using xda premium

1.basics :-
Turn off Bluetooth,wi-fi,3g data connection,GPS when they dont need.....if you dont wanna do it manually,Use Juice Defender(LINK) app. But i will recommend to do it manually,as that app will also consumes some battery
2. First kernel which gave, me and some other users good battery life is dk 2.4.3 (Dont use dk 2.5.2)
1.download dk 2.4.3 kernel...... LINK
2. Download Voltage control app
LINK
2.1 open app
2.2 set cpu min to 100
max to 1000
2.3 i/o scheduler:- BFQ
Governor:- intellidemand(If its laggy then switch to ondemand)
GPU:
100Mhz low
267Mhz high
Voltages:
800mv
950mv
3. Enable Auto Brightness
3.1go to settings>display>advanced mode>enable 'use custom'
3.2 select light level to dim ,select 1
3.3 select edit other levels...
3.3.1 under screen option
choose values:- 15,35,55,75,245
3.3.2 select save settings.
3.XCeLL-X69
*Download XCeLL-X69 from this LINK
*Script for this LINK
now follow steps 2 to 3 from Point 1 (i.e dk point) [use Governor:-Conservative/ondemand]
Voltages:
100 - 850mV / 875mV (if it freezes change to alternative)
200 - 875mV / 900mV (if it freezes change to alternative)
500 - 925mv
800 - 975mv
1000 - 1100mV
1200 - 1200mV
1400 - 1350mV
---
GPU:
100Mhz low
267Mhz high
Voltages:
800mv
950mv
AC Charge:
650mA
USB Charge:
500mA
Let it be charge to 100%, then let is drain below 5%....then again charge it 100%, after this check results
For first charge it will drain fast.after that you will see good battery life.
hi sorry, im a bit confused over here. so if im using dk.2.4.3, i can just follow the points for the bolded parts only right?

aeonstorm said:
hi sorry, im a bit confused over here. so if im using dk.2.4.3, i can just follow the points for the bolded parts only right?
Click to expand...
Click to collapse
Only follow step 1 & 2....means
1.basics
2. Dk 2.4.3
Sent from my GT-I9100 using xda premium

Thanks for this gh.rohit
Might want to in OP that turning of push feature and using k-9 or manual sync saves a lot of Battery. Not everyone needs instant notification of a mail etc.

Worth a try mate
Sent from my GT-I9100 using XDA App

thanks Guys

dk 2.4.3 kernel does not support clock by clock voltage? or is it the voltage control that is the issue? ( Hope not since I really like it. Thanks for posting it old SetCPU user..)

frewys said:
dk 2.4.3 kernel does not support clock by clock voltage? or is it the voltage control that is the issue? ( Hope not since I really like it. Thanks for posting it old SetCPU user..)
Click to expand...
Click to collapse
No dk dont support Voltage settings. but stil it gives you good battery life

gh.rohit said:
No dk dont support Voltage settings. but stil it gives you good battery life
Click to expand...
Click to collapse
Ok that sorts that out. Thanks again. And yes. So far so good!

Ics stable voltages UV/OC

HI
since in ICS firmwares we can talk about different cpu voltages than gb and i think it's a hot subject mostly in kernel threads i believe i can start this thread because many are interested about this. i use speedmod kernel k3-7 and i can use only tegrak overclock ultimate to change voltages. my stable config is:
200 mhz- 825 mv
500 mhz-925 mv
800 mhz-975 mv
1000 mhz-1050 mv
1200 mhz-1150 mv
with this config i get no freeze or sod. so please post your stable config too.
new info:
-seems that i can't go below 925 mv at 500 mhz
-i will see how the battery life will go with these voltages and i will post some pictures because i am interested in undervolting for battery life.
i also saw a post in neak ics kernel where a user had 7 h and 32 minutes display time.

pissyhun said:
HI
since in ICS firmwares we can talk about different cpu voltages than gb and i think it's a hot subject mostly in kernel threads i believe i can start this thread because many are interested about this. i use speedmod kernel k3-7 and i can use only tegrak overclock ultimate to change voltages. my stable config is:
200 mhz- 825 mv
500 mhz-925 mv
800 mhz-975 mv
1000 mhz-1050 mv
1200 mhz-1125 mv
with this config i get no freeze or sod. so please post your stable config too.
Click to expand...
Click to collapse
What were your gb values?
Sent from my GT-I9100 using Tapatalk

Yes, I don't see the values changing with ICS.

I should pay some more time on it... 825mV for 200MHz so amazing

hi
it seems if i go down 925 mV for 500 mhz i got freeze.

Hrithan2020 said:
What were your gb values?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
hi
theese were my values in gb roms:
1200mhz - 1150mv (stock = 1250mv)
1000mhz - 1050mv (stock = 1150mv)
800mhz - 950mv (stock = 1050mv)
500mhz - 875mv (stock = 975mv)
200mhz - 850mv (stock = 975mv)
and i used phenomenal 4.0 extreme without freeze or sod.
my phone was produced in octomber 2011.

pissyhun said:
hi
theese were my values in gb roms:
1200mhz - 1150mv (stock = 1250mv)
1000mhz - 1050mv (stock = 1150mv)
800mhz - 950mv (stock = 1050mv)
500mhz - 875mv (stock = 975mv)
200mhz - 850mv (stock = 975mv)
and i used phenomenal 4.0 extreme without freeze or sod.
my phone was produced in octomber 2011.
Click to expand...
Click to collapse
Strange.. Are you sure, that you had set the lowest possible values for GB?
For me, it looks as if I would have to increase the voltages a bit in ICS.
Haven't looked too much into it.. [running CM9 with Siyah rc3.. both beta.. need work]

GB voltage:
1200 MHz - 1150 mv
1000 MHz - 1050 mv
800 MHz - 950 mv
500 MHz - 850 mv
200 MHz - 800 mv
Always stable for me. I always use this voltage settings until I update my phone into ICS.
ICS voltage:
1200 MHz - 1150 mv
1000 MHz - 1050 mv
800 MHz - 950 mv
500 MHz - 925 mv
200 MHz - 800 mv
It seems I can't set the voltage for 500 MHz lower anymore. Otherwise the phone will freeze.
Sent from my GT-I9100 using xda premium

so far so good.
they seem to be working for me as well.
using Siyah latest kernel and Hydrog3n rom.

hi
some users reported theese voltages to be stable:
200-800 mv
500 - 925 mv
800 - 950 mv
1000 - 1050 mv
1200 - 1125 mV

pissyhun said:
hi
it seems if i go down 925 mV for 500 mhz i got freeze.
Click to expand...
Click to collapse
Hahaha, Are you really sure ?
Who dares trying my extreme UV​ values ?​
My UV stable table (Mhz/mA) :
1200 (1125) | 1000 (1025) | 800 (950) | 500 (900) | 200 (800) | 100 (800)
Noop + On demand.
Thanks to NEAK for its magic on my S2

Hi
Changed kernel-neak and i use now
850 900 950 1025 1125 mv
Sent from my GT-I9100 using XDA

well this are my settings:
Min/max: 100 mHz-1200mHz
vr - smartassV2
100 - 825
200 - 875
500 - 925
800 - 975
1000 - 1050
1200 - 1150
Siyah 3.0
i tryied to go a lil bit under this settings, but then i had some freezes. i think 500 and 800 makes the most problems.

on ics i have to pull up a bit the voltages that were stable for me on gb, but the annoying thing is that i can´t go less than 925mv for 500mhz step, i get freezes and on gb i was on 875

I'm running 200Mhz 775mV stable
800Mhz 925mV
But cant get stable at 1600Mhz, I get freeze on anything between 1325-1500mV
Anyone can?

This thread is kind of useless .. every phone supports different UV !
Sent from my GT-I9100 using xda premium

I dont think so
Sent from my GT-I9100 using XDA

i am confused cause all tht magic an other tweaks really dint work for me,i tried all but sometimes the phone runs jus for few mins and right now my phone is fully loaded like 400+apps an iam downloading more day by day too check how much sgs2 will handle.an yes i think every phone is diff...

Jodelaplaya said:
This thread is kind of useless .. every phone supports different UV !
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
pissyhun said:
I dont think so
Sent from my GT-I9100 using XDA
Click to expand...
Click to collapse
Well, each phone has different tolerance to Undervolting. I for example can not go lower then these values:
200MHz - 900/925mV
500MHz - 950/975mV
800MHz - 1050mV
1000MHz - 1100-1150mV
1200MHz - 1250mV
If I go lower then 1250mV for 1200MHz, I will get freezes (if not instant then when browsing the net or something heavy). As you can see my values are not so "extreme", other people can undervolt much more.
There has been one succesfull thread of this type from Geko, it's called MagicConifg (if you click on Undervolting in my signature you will be taken there). He tested for months which UV settings would work for 99% of the people. I was one of the few people that couldn't handle his config
Anyway, I don't say that this thread is totally useless. Discussing UV settings can be helpfull for others which are new to Undervolting. But for me the UV settings have stayed the same as on GB, don't know if it's so different UV'ing on GB and on ICS.
As long as people realise: the settings that work for somebody may not work on your own phone! A lot of people in this thread undervolt heavy and there is a big chance your own phone will freeze (and if you set it on boot and can't remove them anymore, that means reflashing your rom...). So be carefull

Cm9 rom/kernal
200 @ not used
500 @ 825 mV
800 @ 950 mV
1000 @ 1050 mV
1200 @ 1150 mV

Best setting for performence with nexus 4 ak kerenl

I use nexus 4 with an kernel and controlled with synapse, what the best setting to performances, I mean to CPU volt and GPU and some good setting .
Thanks.

MotoMileCm7 said:
I use nexus 4 with an kernel and controlled with synapse, what the best setting to performances, I mean to CPU volt and GPU and some good setting .
Thanks.
Click to expand...
Click to collapse
theres no such thing as best, since best means different for every single person. BEST is for you to mess with the settings yourself to find YOUR best settings.

simms22 said:
theres no such thing as best, since best means different for every single person. BEST is for you to mess with the settings yourself to find YOUR best settings.
Click to expand...
Click to collapse
Okey , but this is the first time I control volt, what you prefers?

MotoMileCm7 said:
Okey , but this is the first time I control volt, what you prefers?
Click to expand...
Click to collapse
voltage isnt about preference. every phone is binned differently and needs different voltages. every phone is different when it comes to what voltages it can handle. if you are playing with voltages to save battery, undervolting does not save battery, but can slightly reduce heat.

CPU
81 650
162 655
270 660
384 675
486 700
594 700
702 725
810 750
918 780
1026 815
1242 880
1350 910
1458 935
1512 950
GPU
Voltage1, Voltage2, Voltage 3 = 900mv ondemand
I'm running fine without reboots on AK Kernel 335 + Stock 4.4.4 + Z2 libs + Interactive gov. These were the most minimal voltages i could achieve, but see what better fits you.

sky0165 said:
CPU
81650
162655
270660
384675
486700
594700
702725
810750
918780
1026815
1242880
1350910
1458935
1512950
GPU
Voltage1, Voltage2, Voltage 3 = 900mv ondemand
I'm running fine without reboots on AK Kernel 335 + Stock 4.4.4 + Z2 libs + Interactive gov. These were the most minimal voltages i could achieve, but see what better fits you.
Click to expand...
Click to collapse
Thanks but I have 20 voltage to change, why?

Probably different kernel.