[Q] Problem with Flexreaper Rev5 - Acer Iconia A500

I am having some problem with Flexreaper Rom. I installed it yesterday and it worked really fine for me. But I faced some problem when I restarted my Tab. If I restart my tab in Recovery and do not do anything, not even wipe my cache, just reboot. Rom is stuck at Boot animation screen. I need to reinstall the Rom. So when I install the Aroma themes without wiping the cache, I can not run my Rom. But I loose all my previous settings and installed applications on wiping the cache memory.
Is it the problem with my tab only or somebody else is also having the same problem.....

Related

Rebooting when installing an APP (Tranquility 3.6)

Hello,
I recently installed tranquility 3.6. I cleared the cache and installed via Rom Manager. I was running OTA 2.3.340 and the install went fine. I rebooted and had no bootloop or anything.
The phone booted fine and runs fine but I can no longer install any apps. I cleared the markets cache and all that and it still would not work.
I also cannot install any app through Astro manually.
When I cleared the cache it removed the Rom Manager recovery, since I can no longer access it.
My delima is I can no longer install anything to reinstall a new rom.
Now I would like to know if the System only 2.3.340 SBF will fix this or not. I read online going into the stock recovery and doing a factory reset would work as well.
I REALLY need this back working
I fixed this problem by booting into recovery and clearing data/factory reset and clearing the cache.
Sent using dx/xda app
I did the same thing as the post above. Fixed everything for me
I think that's a common problem for Tranquility. I had to wipe and install it a few times to get everything working properly. No issues since then though.
Sent from my DROIDX using XDA App
had similar problems
http://forum.xda-developers.com/showthread.php?t=895311
i wasn't able to factory reset from recovery, however i was able to factory reset from inside Android which then booted it into recovery just fine (this was after SBF'ing the first time)
apparently doing a factory reset will fix tranq

cant flash new rom

Hi
I have a acer iconia a500 and i was trying to flash a rom using the acer recovery installer, i have dont this about 10 times but this time when i booted into the recovery kernal then wiped the chache and the dalvick cache and the battery stats then installed minimalist 3.1 it installed then i rebooted and it did not have the launcher and all my apps where still there. How can i fix this i have tried other roms same thing i need help fixing this
Not only wipe cache user data.i format partitions as well. Reboot back into car.and wipe cache again after flashing rom before booting into it first time.there is a thread about this
+1 to erica
You need to do a *full* wipe before flashing a new ROM.
if i do a full wipe will i loose all my data ie music etc also where is the thread about it?
If running it fro Acer recovery installer, just check the 'wipe data' checkbox. It won't erase your /data/media files. This is all I do when flashing a new rom. Have never had any issues.
Sent from my A500 using Tapatalk

Not able to flash other ROMs

Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Bhagwanie said:
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Click to expand...
Click to collapse
After flashing a rom Try wipe cache , dalvik reboot should work
if not wrkng then try flashing rom factory reset , wip cache , dalvik reboot
if u are using PHILZ recovery no plm but if u have other recovery have PHILZ that will be a solution
123hiten said:
After flashing a rom Try wipe cache , dalvik reboot should work
if not wrkng then try flashing rom factory reset , wip cache , dalvik reboot
if u are using PHILZ recovery no plm but if u have other recovery have PHILZ that will be a solution
Click to expand...
Click to collapse
Hi 123hiten,
Thank you for your reply.
- I flashed FoxHound ROM, wiped cache and dalvik cache. No success..
- I did a factory reset, wiped dflashed FoxHound ROM again, wiped cache and dalvik cache. No success.
- I flashed PhilZ recovery, did a wipe data/factory reset, flashed FoxHound ROM again, wiped cache and dalvic cache.. and again no succes..
I didn't understand what u meant in your last sentence with ''plm''?
I tried to flash the PACman ROM again, and it worked, but still I'm getting Force Close when someone calls me or if I'm trying to call someone.
I really dont know what to do now..
Bhagwanie said:
Hi 123hiten,
Thank you for your reply.
- I flashed FoxHound ROM, wiped cache and dalvik cache. No success..
- I did a factory reset, wiped dflashed FoxHound ROM again, wiped cache and dalvik cache. No success.
- I flashed PhilZ recovery, did a wipe data/factory reset, flashed FoxHound ROM again, wiped cache and dalvic cache.. and again no succes..
I didn't understand what u meant in your last sentence with ''plm''?
I tried to flash the PACman ROM again, and it worked, but still I'm getting Force Close when someone calls me or if I'm trying to call someone.
I really dont know what to do now..
Click to expand...
Click to collapse
Hi.
"plm" = problem
What firmware does your phone say it has got?
malybru said:
Hi.
"plm" = problem
What firmware does your phone say it has got?
Click to expand...
Click to collapse
I don't know where to see that, but I'm sure it's XXUBMF8.
That's the stock firmware I flashed.
Bhagwanie said:
Hi all !
Since yesterday I'm not able to flash any ROM on my I9505. This is what happened.
Yesterday I was flashing a ROM (PACman) and on that ROM I was getting a lot of FC
so I decided to put my previous ROM back on my phone (FoxHound). After the Aroma install,
my phone reboots and keeps stuck at the splash ''Samsung'' logo screen.
This is driving me crazy. I tried to flash different ROMs with no success..
I couldn't boot my phone up, couldn't access recovery, only download mode.
After I flashed a stock firmware with Odin, I can boot up and use my phone properly.
I only can't flash any other ROMs anymore, cause it will cause my phone to keep stuck
at the ''Samsung'' logo..
Someone got a solution? Or is someone having the same problem?
Click to expand...
Click to collapse
try this method...WIPE FACTORY RESET...WIPE CACHE PARTITION ...advanced > WIPE DAVILIK CACHE and BATTERY STATS...and then go to MOUNT AND STORAGE and FORMAT SYSTEM...and thn try to install the rom hope it will work

Clockwork Mod Recovery

Hi guys, I wonder can anyone help. I done a backup using Clorkwork Mod before I flashed a new ROM onto my phone. Now when i am trying to restore the backup onto the phone using CWM it completes the task but whenever I reboot the phone it gets passed the first samsung screen but hangs at the second SAMSUNG screen where the text is pulsing.
I have tried Wipe / Data factory reset, Wipe Cache, Wipe Dalvick and fix permissions. None of these seem to make any difference. The only thing that has worked in flashing a new ROM but I do not want to lose any of my apps /configs.
Any suggestions guys would be much appreciated.

My G2 won't load any rom at all...

The problem started yesterday. Did an OTA update from CM11 to CM12 but it caused so many problems so I booted to TWRP, wiped everything clean, transferred CM12 to my via Fastboot and did a clean install. Rebooted and it just lingers on the boot logo for ages. I tried the wipe and install again, same problem. I wiped my dalvik & cache, same problem....
So I thought maybe that version of CM was just buggy so I wiped again, transferred Resurrection Remix via Fastboot and installed that. It was at the boot logo for an hour before I gave up and turned it off.
I've never had a problem like this which has spanned between different roms, what could be the problem? I'm installing stock now, hopefully that works so I can try again
L3534N said:
The problem started yesterday. Did an OTA update from CM11 to CM12 but it caused so many problems so I booted to TWRP, wiped everything clean, transferred CM12 to my via Fastboot and did a clean install. Rebooted and it just lingers on the boot logo for ages. I tried the wipe and install again, same problem. I wiped my dalvik & cache, same problem....
So I thought maybe that version of CM was just buggy so I wiped again, transferred Resurrection Remix via Fastboot and installed that. It was at the boot logo for an hour before I gave up and turned it off.
I've never had a problem like this which has spanned between different roms, what could be the problem? I'm installing stock now, hopefully that works so I can try again
Click to expand...
Click to collapse
If you note a problem like this after installing a rom, i think you can try format data, not a simple wipe but a format in twrp

Categories

Resources