Related
The great devs from the dev section made it they bypassed the bootloader for our x8 device..... and that means we can get the most perfect roms ever..... and all the modules we want....
the_laser said:
Greetings.
warning.
if you are not developer, please quit reading that post.
wait for user friendly tool with one big button.
here ( View attachment 712577 ) is toolset to permanently "unlock" semcboot of msm7227 semc phones.
that means, you can use own kernel and so on.
steps,precautions, etc.
unpack archive to any directory.
if you using eset antivirus or similar ****, it will find evil virus in adb.exe.
ignore that, it is not virus in any way, it is standard android debug bridge, bundled in one file to save space and usability.
now, if your phone unlocked officially:
flash phone with standard 2.0,2.1 android firmware,because kernel mapper module compiled for "2.6.29" kernel.
of course, enable "usb debugging"
run msm7227_semc.cmd,
( if you want, examine it before run, it is pretty straightforward. )
you will get similar output
Code:
process requires standard 2.x android firmware.
Press any key to continue . . .
Getting ROOT rights.
1743 KB/s (585731 bytes in 0.328s)
error: protocol fault (no status)
Waiting ...
Removing NAND MPU restrictions via SEMC backdoor. Permanent. Require ROOT rights.
192 KB/s (3087 bytes in 0.015s)
success
Waiting ...
Getting ROOT rights.
Waiting ...
Writing patched semcboot. Two step process
First, we need get access to semcboot area
504 KB/s (8064 bytes in 0.015s)
Second, we need to write semcboot ;)
1130 KB/s (596916 bytes in 0.515s)
successfully wrote 0003ff00
Press any key to continue . . .
bingo, your phone now has unlocked bootloader.
if your phone unlocked by setool2 software, use msm7227_setool2.cmd
if your phone unlocked by 3rd-party software other than setool2, do not run anything -
it will disable radio capability of your phone and you will need to unlock phone by setool2 software.
hopefully, mizerable flea and mOxImKo will release something similar for your phone.
okay, now about other details.
1.
unlocked bootloader require unlocked loader, yep ?
loader\loader.sin is special unlocked loader, which will be accepted ONLY after your "unlock" semcboot with previous steps.
to distinguish unlocked semcboot and original semcboot, first letter in version tag of semcboot output will be lower case, i. e. "r8A029"
( same applies for loader version tag )
so, all that stuff with signatures are not for us, so i removed them - loader will ignore signature part of SIN file.
2.
we should make SIN file somehow, right ?
for that i prepared "dumb" bin2sin utility.
[input] - is input binary file.
[partition info]
android implementation on s1 semc qualcomm phones based on partitions,so we MUST define it for our file.
you can get required partition info from standard semc sin files, it is first 0x10 bytes of DATA, right after header, i.e.
[type] - partition type, 9 - partition without spare, 0xA - partition with spare.
kernel partition is partition without spare.
if that parameter omitted, type = 9
[block size] - nand block size, if omitted, it is standard size 0x20000
there is example in sinTools\example_build.cmd
3.
kernel should be prepared specially to be accepted by semcboot.
for that there is tool bin2elf.
we need 2 segments:
segment 1 is unpacked linux kernel image, i.e.
( e10/kernel/arch/arm/boot/Image )
it looks like entrypoint and load address for segment 1 is always same for all msm7227-based semc phone, it is 0x00208000
attributes for image 0x0
segment 2 is ramdisk.
it looks like entrypoint and load address for segment 1 is always same for all msm7227-based semc phone, it is 0x01000000
set attributes for ramdisk 0x80000000, that is extremly important.
there is simple kernel example in sinTools\example_build.cmd
ps.
@blagus:
NAND MPU disabler has only one relation to rFoNe - he took it from setool2, together with entire idea for msm7227 bypass.
your 6-wings friend with many nicks done exactly same.
NAND MPU has nothing to do with memory firewall, so it will not help with kexec things, however, who will care now.
Click to expand...
Click to collapse
Sent from my X8 using XDA App
What´s up?
Edit: Now there is a text in previous post. Yersterday there was nothing
Like realdualtouch for synaptics ??
Hehe sooo excited...
abaz123 said:
Like realdualtouch for synaptics ??
Hehe sooo excited...
Click to expand...
Click to collapse
Synaptics doesnt support two or more fingers just one so even if bl is cracked it wont help. But we will be able to oc GPU for example and also Racht will continue porting sense ROMs to x8.
To be honest, I just don't believe it if the devs don't officially announce.
But synaptic phones like htc legend and nokia n8 support DT. So it might be possible and I 'm not the only one who says that. LOL
However I hope it's possible.
Sent from my X8 using XDA App
so cracked bootloader why good for us? What extra things can we get now? overlock gpu okay, other?
OP, please include original post in BL thread from the_laser in 1st post, this will keep non dev's out of BL thread in dev section, Thank you.
EDIT: Thanks lopman
Congratulations to the X8 community!
It has finally happened.
Also to the guy who said this isnt true, you should check the thread out abit more. the_laser is the guy who bypassed the bootloader on the x10 if i remember correctly
Time for fully functional SENSE Racht?
abaz123 said:
But synaptic phones like htc legend and nokia n8 support DT. So it might be possible and I 'm not the only one who says that. LOL
However I hope it's possible.
Sent from my X8 using XDA App
Click to expand...
Click to collapse
THEY HAVE A DIFFERENT SYNAPTICS DIGITIZER!!!!!! Its been explained sooooo many times (by real devs, with documentation from synaptics) that the particular synaptics digitizer that's in our phone doesn't support more than one finger! I don't mean to attack u personally cos I'm sure ur a great guy but it annoys me to see this everywhere.
Also awesome news about bootloader but some confirmation by blagus or someone would be nice
Sent from my X8 using XDA Premium App
They have same synaptic digitizer , even devs told that... -.- Do some read.
mati96PL said:
They have same synaptic digitizer , even devs told that... -.- Do some read.
Click to expand...
Click to collapse
+1000 Same digitizer ! But nobody want to do DT on our phone !
http://forum.xda-developers.com/showthread.php?t=1185150
Sorry for my bad english
@dmcb123 : i know what I wrote. And I'm sure.... I'm not the only one who says that : AnDyx(great dev) and other devs said that too. If you don't believe me, you can read a topic called "x8gesture" and
you'll be surprised, man
Sent from my X8 using XDA App
Say if I get a bricked x8 (buy one or whatever...) with a Cypress. can I replace the chips? well I cant but I can get someone who would do that. Possible? or are there problems with the kernel and that sorts of nature?
Bahurs1 said:
Say if I get a bricked x8 (buy one or whatever...) with a Cypress. can I replace the chips? well I cant but I can get someone who would do that. Possible? or are there problems with the kernel and that sorts of nature?
Click to expand...
Click to collapse
Not the chips, you could replace the entire dizitizer.. it would work and it's easier
so does this mean major bugs will be eliminated?
what is next? like how do we get benefits of bl?
and btw do we have now new features?
and does this mean better performance and better oc?
if we unlock our bootloader with stock SE 2.1 firmware will we still be able to flash a custom ROM i.e. FroyoBread and still have it unlocked?
Questioner said:
so does this mean major bugs will be eliminated?
what is next? like how do we get benefits of bl?
and btw do we have now new features?
and does this mean better performance and better oc?
Click to expand...
Click to collapse
hard to tell all... you can just go see what they achieved with x10. same thing
(almost...)
Nikkopt said:
Not the chips, you could replace the entire dizitizer.. it would work and it's easier
Click to expand...
Click to collapse
Hmm... do you think they sell that on ebay? I mean really, people with bricked Cypress can get the last drop out off it, why not? I must go see what the corner shops are offering....
Unlocked bootloader is like super superuser. Basically it allows greater changes to your phone like custom kernel etc. So our kernel can be upgraded to a newer version, we can include overclock, underclock, swap, pinch-zoom, mddi fix and other stuff into the kernel, so we don't need modules any more.
So this will make more room on the rom side of thing then?
super.sense on x8
it works for E15a? or just for E15i? thanks for your answer....
E15a its same thing as E15i ..
Sent from my Xperia X8 using Tapatalk
Another Q
does it work with GingerDX or any other custom rom or just stock Eclair?
It's working good only on GingerDX..on other roms it will have problems like bootloops...
I am an idiot
Just checked the original post and saw that doixanh said that he uses it with his GingerDX..so sorry for the spam but another question...do I have to unlock the bootloader or it will work only with the instructions from his post...thanks for the patience everybody and for the good work...once you go DX you never go back keep it up!
sapabg said:
Just checked the original post and saw that doixanh said that he uses it with his GingerDX..so sorry for the spam but another question...do I have to unlock the bootloader or it will work only with the instructions from his post...thanks for the patience everybody and for the good work...once you go DX you never go back keep it up!
Click to expand...
Click to collapse
check the original post again and you'll get your answer.
Requirements
Unlocked bootloader
Flashtool 2.9.1
Desire to void your warranty!
Lol kill me please...just can't wait to try it is why...excuse me once again
Sent from my X8 using XDA App
so I wan't to use the thread as well
has anyone tried it and what are your impressions ?
i can't believe the devs were so quick at building a kernel
i don't know how, but gingerdx is now blazing fast Waiting for repair wifi and recoveries
and what about the battery
any difference?
st3ch said:
and what about the battery
any difference?
Click to expand...
Click to collapse
For me is better.. 5% in 5 hours...
everything is fine only wifi is not working yet...
may try out the kernel but without wifi.. >><<
Everything is clear about the famous "swap". so in other words to use the swap feature of DX's kernel we need to install apps from market to activate
thank you for the clarification
doixanh said:
Did you try this simple thing? My search showed this as the first result.
Everything is clearly explained: what swap is, should we use it, apps to enable swap, even how to know swap is enabled or not.
Isn't that simple for newcomers?
Click to expand...
Click to collapse
gxaris said:
Everything is clear about the famous "swap". so in other words to use the swap feature of DX's kernel we need to install apps from market to activate
thank you for the clarification
Click to expand...
Click to collapse
Don't forget that u have to create ext.3 / 4 partition to make it work as well..but it may as well reduce the life of your sdcard
sandy_tea said:
Don't forget that u have to create ext.3 / 4 partition to make it work as well..but it may as well reduce the life of your sdcard
Click to expand...
Click to collapse
No need.
You can use a swap file too.
Besides, it's not really measurable if it's going to reduce your sdcard lifetime, and even if it does, who would want to have an sdcard for more than two years.
UPDATED: Saturday, February, 25th 2012
DISCLAMER:
I AM NOT RESPONSIBLE FOR ANY DAMAGE DONE TO YOUR PHONE IF YOU FOLLOW THESE INSTRUCTIONS: THOSE INSTRUCTIONS THAT ARE MENTIONED ARE WHAT WORKED FOR ME AND OTHER USERS> and when you read this thread,dont just read half or parts of it, read it properly, form start to finish!Hi there dear reader welcome to my guide with new questions new roms and much much more things. It's The latest guide to roms and mods for the x8!!1. we do not accept trolling here. i do not want a flame war here.
2. these mainly benefits me and other rom testers ect.
3.click here for my FAQ that gets updated every week
right onto the guide iitself.
RootingRooting your phone is what you need to do before you install custom roms, modules, and kernels. Rooting means you have superuser access to your phone. a bit like a special admin on a computer. having superuser rights means you also have the power to change you system stuff, delete a system app, add modifications and so on. if you wish to root your phone then click here
great, you'v rooted your phone i hope, now for the fun stuff...
Basebands and kernelsI know that many people have baseband 006. you cant install roms with your baseband at 006 so you will have to change it to 015. unless your phone already has 015. for the baseband collection thread clickthis
i have also found a thread with a custom kernel. its linuxdx by doixanh. for the thread click here
Also a guide on building a kernel. click here for that
Roms:welcome to the rom part of this thread. custom roms are custom android versions, that can easily be modified and customized, they are more than just your average android. most of them are based on cm6 or cm7 or cm6 mini.
here are a couple of gingerbread roms i have found and tested.
gingerbread roms:Gingercruzt by frogy furnetal.
Gingerdx by doixanh
minicm7
froyo roms
froyo pro by XDA-RK
Froyobread by doixanh
sense roms by ratch
how to install custom roms:Now, custom roms are actually quite easy to install. as long as you follow the instructions bellow.
1. copy the rom to your sd card. no subfolder just the normal folder on its own on the sdcard.
2.boot into xrecovery (for more about recoveries click here, its my FAQ you will find info there
3.go to install custom .zip
it should come up with a load of folders you have on your phone. go to the bottom where you will find your rom and choose that.
4. install it and wait...
5. once installed, do a full wipe before rebooting or you could get stuck on rebooting.
5. your done!
Modifications.Right now on to the mods.
some people want dual touch or pinch to zoom for their phones.
well, guess what, you can.
if you have cypress chip on your phone (real dual touch) click here
If you have synaptics (fake pinch to zoom) then click here
If you want to overclock your phone then click here
If you want linuxdx then click Here
how to install linuxdx (and other kernels)I do have a thread about bootloaders and kernels but since i put it in my modifactions section i decided to put a TuT:
grab flashtool 2.9.1 (hard to get hold of but it is the only flashtool that works with flashing kernels, i do have it and i have flashed linuxdx v004 and alfs kernel v05 so i will load up the download file for flashtool 2.9.1)(click here to download flashtool 2.9.1 move linuxdx v004 .ftf to flashootl/firmwares
and open x10flashtool (works with x8 dont worry) click flash and choose file. then follow the onscreen instructions... (plug in x8 whilst holding back button, wait for a few minutes as some coding will show up on the computer screen, then it will say its done and you can disconnect your phone) once completed rebbot phone and enjoy!!!YOU MUST HAVE AN UNLOCKED BOOTLOADER TO LOAD CUSTOM KERNELS!
Recently asked questions!
Hello guys! i decided to update my thread and tell you about more recently asked questions:
How to unlock bootloader:
Answer: There is this thing called search bar, use it because there is more than just 2 threads about unlocking bootloader, actually there is a about 5
Why do i get a hard brick after unlocking my phones bootloader?
Answer: Check your date on the back of the phone: It should have a date such as 11w28 etc. If it is 11w32 and above, then stay away from the bootloader, it will only end up in tears. Many threads about this too, use the search button
Can we run IOS on our x8?
Answer: Are you crazy? check my post here for more. If your thinking of porting it or anything (not that it will ever happen )
if you have anymore things you want me to add, then post a reply saying so.
also check out my FAQ
this will be updated every week.
Also, how did you get to this thread? via my sig, or via searching the forums or searching google?
Very good guide...keep it updated and it will be #1 guide
X8invisible13 said:
Very good guide...keep it updated and it will be #1 guide
Click to expand...
Click to collapse
thanks man. i will keep it updated. im on the forum's nearly everyday so it will be updated as often as possible
hmmm
what would you guys think if i posted like an ultimate guide to the xperia x8 in the xperia x8 general forums containing root, unroot, seus,brick,roms and more. if you think its a good idea then please say so because it might take a while to make the ultimate guide but i think its a good idea
wilbso said:
what would you guys think if i posted like an ultimate guide to the xperia x8 in the xperia x8 general forums containing root, unroot, seus,brick,roms and more. if you think its a good idea then please say so because it might take a while to make the ultimate guide but i think its a good idea
Click to expand...
Click to collapse
a thread like that exists... altho it isn't updated as much anymore
anyway... shouldn't THIS thread be there? this is the wrong place to post this...
wilbso said:
what would you guys think if i posted like an ultimate guide to the xperia x8 in the xperia x8 general forums containing root, unroot, seus,brick,roms and more. if you think its a good idea then please say so because it might take a while to make the ultimate guide but i think its a good idea
Click to expand...
Click to collapse
Its a good idea but instead of making a new thread u could just modify this one and move it to general
X8invisible13 said:
Its a good idea but instead of making a new thread u could just modify this one and move it to general
Click to expand...
Click to collapse
yeah, good idea, i'll do that soon
Ok,good luck may the force be with u
u should add gingerxperia
ok i will
flaviobd said:
u should add gingerxperia
Click to expand...
Click to collapse
sure thing man. this will have gingerxperia on it soon. probaly this monday since its my birthday on moday so i will do it like a special post
thanks mate
X8invisible13 said:
Ok,good luck may the force be with u
Click to expand...
Click to collapse
ok, thanks mate, i will hit the thanks button 3 times. and may the force be with u too as you take your journey through this forum
this is good man.but it will be better if you can make the sort to be more informative,per section,with big title,..
xcal_tau said:
this is good man.but it will be better if you can make the sort to be more informative,per section,with big title,..
Click to expand...
Click to collapse
okay. thanks for the idea. there will be a new layout now
you're on the role man!!
Thanks!!
Thanks! I've been reading it.
tnks man! Its gr8
h37al said:
tnks man! Its gr8
Click to expand...
Click to collapse
thanks for your feedback. i appreciate all the good feedback im getting it also helps me to know if it is a good guide so i can improve it.
-Wilbso
there a alfs kernel bether then ldx
nice guide .
keep updated
thanks dude !!
nice guide for noobs like me
Can anyone please make the alfsv8a kernel with stock sony ericsson boot logo, the image that comes when phone's screen first comes on before booting...
Coz i am selling my x8 for buying xperia mini pro... the person who is buying is giving me 1000Rs ($20 approx) less because i have *MODIFIED* the phone ... can anyone help me out... i am not disrespecting alfs and djnilse, just want my full money for the phone... if its not allowed to post, pls upload somewhere and PM me...
Thanx in advance...
sidkota said:
Can anyone please make the alfsv8a kernel with stock sony ericsson boot logo, the image that comes when phone's screen first comes on before booting...
Coz i am selling my x8 for buying xperia mini pro... the person who is buying is giving me 1000Rs ($20 approx) less because i have *MODIFIED* the phone ... can anyone help me out... i am not disrespecting alfs and djnilse, just want my full money for the phone... if its not allowed to post, pls upload somewhere and PM me...
Thanx in advance...
Click to expand...
Click to collapse
Just flash to stock kernel and GingerDX. I dont think anyone ever change the kernel logo b4.
Sent From My W8 Using Tapatalk On MiniCM9 3.0.1
So what about just flash back to stock? So he can't say you have a modified phone?
Hope it helps
Sent from my E15i using xda premium
wil do stock kernel with primehd instead, looks pure gingerbread...
I get what you mean, but to do so you need Linux Mint or Ubuntu installed. Then you need to decompile the kernel, look for the .rle pics in the ramdisk and change them to whatever you want. Recompile the kernel and test it out. But you know what's the ironic part ? Its easier said/explained than done
RohinZaraki said:
I get what you mean, but to do so you need Linux Mint or Ubuntu installed. Then you need to decompile the kernel, look for the .rle pics in the ramdisk and change them to whatever you want. Recompile the kernel and test it out. But you know what's the ironic part ? Its easier said/explained than done
Click to expand...
Click to collapse
cant anyone use the kernel kitchen and compile?
sidkota said:
cant anyone use the kernel kitchen and compile?
Click to expand...
Click to collapse
Even kernel kitchen needs linux or ubuntu if im not mistaken
Sent from my E15i using Tapatalk
RohinZaraki said:
Even kernel kitchen needs linux or ubuntu if im not mistaken
Sent from my E15i using Tapatalk
Click to expand...
Click to collapse
It works on my windows + cygwin setup... But don't know why it always gives error while decompiling kernel.sin... Even used ubuntu 11.10 but same problem... Maybe it can be because i'm not accustomed to linux environment... Thats why thought someone else might help...
And also I would like to know people's opinion, on whether I should buy xperia mini, xperia mini pro, or live with walkman? My heart is stolen by mini pro! But still asking for opinion...
http://forum.xda-developers.com/showthread.php?t=1659584
With this you can change the bootimage. I haven't tried, but I will
"this extracts zimage and ramdisk from ftf file if it contains kernel.sin
this works on linux natively or on cygwin, but not native windows"
So I think you can't do it on windows...
no need now guys! Had bought w8 for 149$, sold it for 125$..! Not bad!
The shopkeeper really thought it has official gingerbread!
THIS TUTORIAL IS FOR XPERIA ARC ! I DO NOT KNOW IF IT WILL WORK FOR THE ARC S !/!\ sorry for my english I use google translation /!\
- I do not pretend to have found the how or why of it
- All I can say is that manipulation works every time with me and I unlocked my bootloader several times via the official SE method.
- Also note that I do not know at what time the method allows to recover DRM, but what I can say is that at the end of this one every time I recovered DRM.
/!\ WELL MAKE SURE THE MANIPULATION IN ORDER WRITTEN BELOW: /!\
THIS METHOD RETURN YOUR ROM ORIGINALLY. DRM RECOVERED ONCE YOU CAN CHANGE THE ROM AND KERNEL ON YOUR OWN.
Make a backup of your rom before you start!
1. Download the attachments below.
-0.431.ftf : HERE
-0.587.ftf : HERE
-S1Tool : HERE
-Kernel 0.587(boot_arc.img): HERE
-Walkman 1&2 : HERE
-SuperUserRoot : HERE
2. Copy 0.431.ftf, 0.587.ftfand Boot_ARC.img in Flashtool/firmwares
HANDLING:
1. Put your rom version has 4.1.B.0.431 with Flashtool and previously downloaded rom ftf
2. Open S1Tool relock your bootloader with the tutorial here -->HERE !
3. upgrade to a phone with Flashtool version 4.1.B.0.587 and previously downloaded rom ftf
At this stage of the operation, you are 4.1.B.0.587 version, Bootloader locked and DRM does not always work...Do not panic this is normal!
4. We must now unlock the bootloader to the technical testpoint, tutorial here ->HERE !
( It sounds complicated but in reality it is very simple and very fast. )
5. install the kernel-provided below (boot_ARC.img) with Flashtool (incl. CWM you will then root)
At this level, it is possible that you have already retrieved the DRM data (I have not tested at this stage)
6.
- Copy 2 versions walkman and Superuser_ROOT.zip of your SD card
- Enter in recovery mode and install Superuser_ROOT.zip, the _1_walkman, then immediately _2_walkman
- Start your phone and manually install the file audio_effects.conf in the folder /system/vendor/etc/
Here, if you have done everything you need to be on the latest version of the rom, bootloader unlocked, walkman installed and DRM recovered !
CREDITS :
TrillinaC for Walkman port
subhankar.ds for [KERNEL]ARC/S-Advanced stock-4.1.B.0.587-[ROOT+INIT.D+CWM+SD-EXT]
If you ,have found the way to do it...simply great......another milestone in android development....
I respect your work.
Has anyone tried it..?
Sent from the Underdog..
will try it this weekend. I think, the key is the "Walkman ". Cuz the Trillina has fixed all the issues of Walkman, of course "download info". I have saw a comment that said, the "download info "will work only if the BL is locked. Do you guys know what I mean, sorry for my poor English, I'm just a student from China
Sent from my LT18i using xda app-developers app
Would love to try this on my arcs but all the files are for arc
Sent from my LT18i using xda premium
shadstheman90 said:
Would love to try this on my arcs but all the files are for arc
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
I think it could work with Arc S
Once finished, it will be enough to put a rom for arc S and the kernel that suits you best.
I recall that DRMs are recovered and that the bootloader is unlocked.
Well after doing a bit of research..
DRM KEYS ONCE LOST WILL NOT BE RECOVERED.
Those keys are saved in the Trimarea.. and we do not know the exact files which are deleted from there.
Hmm so is this really working or?
Sent From My Sony Xperia Arc S
simplyjustkids said:
Hmm so is this really working or?
Sent From My Sony Xperia Arc S
Click to expand...
Click to collapse
I don't think so since if there was really a method to recover the DRM keys, Sony would have let us know about it or used a method for us not to lose them.
simplyjustkids said:
Hmm so is this really working or?
Sent From My Sony Xperia Arc S
Click to expand...
Click to collapse
No.. Working Music info download or Track ID does not prove that DRM is recovered. There are workarounds to make stuff like FBMedia like or TrackID work..
heinrichkaiser said:
No.. Working Music info download or Track ID does not prove that DRM is recovered. There are workarounds to make stuff like FBMedia like or TrackID work..
Click to expand...
Click to collapse
After Official SE unlock , I could not do anything, FB Like or download music info or download album cover.
after handling, everything worked.
I'm not saying they invented something, I just think that in this combination, it is something that puts in place the drm or at least re-work that allows all the elements mentioned above.
Don't say i don't think so try and post the results.........
So is it working or not ???
Sent from my LT18i using xda premium
stef67000 said:
After Official SE unlock , I could not do anything, FB Like or download music info or download album cover.
after handling, everything worked.
I'm not saying they invented something, I just think that in this combination, it is something that puts in place the drm or at least re-work that allows all the elements mentioned above.
Click to expand...
Click to collapse
Yes I know what you are saying.. Like I said using your method does make em work(there are other work arounds too).. but the DRM is not recovered. The system is just fooled..
shadstheman90 said:
So is it working or not ???
Sent from my LT18i using xda premium
Click to expand...
Click to collapse
TrackID will work with this method but will not restore your keys.
Sony said that in their bootloader unlock instructions: once you unlock you will lose your DRM keys
Sent from my LT18i using xda app-developers app
You mean the old trackid will work after this?
Sent From My Sony Xperia Arc S
after this manipulation, the former track id works but it says that the version is outdated.
-info-music works
-FB-like works
-change the cover works
-ect ..
If DRM is not recovered in any case everything works.
the 2 links in the guide are french, how did u people understood what to do?
deniel said:
the 2 links in the guide are french, how did u people understood what to do?
Click to expand...
Click to collapse
Google translate :silly: