tectile/nfc issue - Galaxy S III General (US Carriers)

been playing with the nfc tectile...
I want to set it up for the car...
1. run on bluetooth, set ringer and media vol. to max and brightness to auto.
i can do this ok
2. launch the audible app.. i can also do this
But there does not seem to be a way to do both.. the tectile app writes to the sticker are not cumulative.. it is either one or the other.. anyone have any thoughts or a better app so i can do both.. thanks

i think you need to use two tectiles. 1 to change settings and the other to launch aps.

to answer my own question:
nfc task launcher app in the market works for this.. can combine stuff. even has toggle. so first time it sets all the stuff for the car .. next turns them off for home..
was worried i would have to run the app but you don't has some background service that works.
only 1.99 works well..

Related

My Solution to Help Stop Screen Freezes (Tasker app)

Since a lot of people suggest disabling the g-sensor to prevent the screen freezes I thought I'd try something.
I don't want to have my rotation disabled as it's very handy to have. So what I do is use an app called Tasker. It's not free, but there is a 7-day trial available.
Basically I have it set to disable screen rotation every time the screen is off..and so far I haven't had any screen freezes. It may be coincidence, it may not be. I'm not exactly sure if the app does disable the g-sensor or does something else, but so far so good.
For those that don't know about Tasker...it's probably the best app that will ever be made for Android. You can make your phone do almost anything.
For example, I use it to:
When I get home, Wifi turns on and 3G is turned off. When I leave home, Wifi turns off and 3G turns on....same for work.
I have it disable wifi, 3g and screen rotation at night when I'm in bed.
It enables GPS when I launch maps or navigation, and disables GPS when I close the app.
And those are very basic ones...
The Tasker wiki has many more advanced "profiles" you can use:
Code:
Lock An Application
Start the Day with a Particular Application
Battery Full Alert
Launch Music App When Headset Inserted
Launch Menu of Music Apps When Headset Inserted
Keep screen awake when using the keyboard
Speaking Clock for Android 1.5
Control Keyguard (scroll to unlock) when Power is Connected/Disconnected
Keep Multiple Backups of Tasker Config
Change Ringtone on Every New Call
Mute in Meetings
Hold Ringer Volume Down
Auto-Respond To SMSs At Night
Change Volume Levels during Different Times of the Day
Check Data/SMS/Minute Usage With Carrier While Sleeping
Temporarily max brightness of screen during Incoming Call
Auto (Silent) Sleep Mode with Exceptions
Intermediate
Power Plug In - Choose Car/Home/Night Mode
Generic Toggle Widget
Open the keyboard and start texting
Set volume then Launch menu of music apps
Alarmclock without Snooze
Alarms with Snooze and Vibrate
Geburtstagserinnerung (German)
Car Locator
Notification Reminder Pulse
Locate your phone using SMS and google maps
Lock your phone and locate it by SMS and sound
A full talking clock
Act like a docking station when plugged into USB
Auto answer calls when your bluetooth headset is connected
Extended phone profile changer with Notification and Widget
Turn your cell phone into a Voip phone
Advanced
Periodic Data Check (Juicedefender Replacement)
Creates profiles similar to S60 devices and changes them depending on variety of factors
U.S. Navy Ships Bells (Using Tasker's OR '/' feature) * Pattern Matching *
Changing background image depending on current weather (Using HTTPGet)
Or you can simply create your own...there is a learning curve, but once you get a feel for it, it's VERY powerful! It can control almost every part of your Android phone.
There's a decent thread with more examples on xda in this thread.
I realise this is a software post, but it's main aim was to point out a way of disabling rotation to help with screen freezes
Hey,
thanks for this thread, i have downloaded tasker now.
Can you post your code for disabling gsensor when screen is off?
//EDIT: Sorry, its very easy.. i think i can create it by myself
HTC_HDD said:
Hey,
thanks for this thread, i have downloaded tasker now.
Can you post your code for disabling gsensor when screen is off?
//EDIT: Sorry, its very easy.. i think i can create it by myself
Click to expand...
Click to collapse
Hehe yep, it's an easy one.
New Event profile > Display off is the Event. Action is disable rotation
I have done it like you and added a task which enables the rotation if screen is on, is this correct?
I have used the phone now and i got freezes again, but not so much.. i think.
Sent from my HTC Desire using XDA App
HTC_HDD said:
I have done it like you and added a task which enables the rotation if screen is on, is this correct?
I have used the phone now and i got freezes again, but not so much.. i think.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
Yep, you also have to create another to say disable screen rotation when the screen is off.
@the_scotsman
Thanks for the suggestion, I've seen a few people mention this app before but now I finally downloaded it. I'll play around a bit to figure out some combos, but one quick question..
Is this going to be something running in the background sucking up battery and memory or is it just like running scripts? What do you think? I'll run current widget once I get some tasks going to see happens, just wondering if you've found anything out yet.
tgtoys said:
@the_scotsman
Thanks for the suggestion, I've seen a few people mention this app before but now I finally downloaded it. I'll play around a bit to figure out some combos, but one quick question..
Is this going to be something running in the background sucking up battery and memory or is it just like running scripts? What do you think? I'll run current widget once I get some tasks going to see happens, just wondering if you've found anything out yet.
Click to expand...
Click to collapse
It depends on what profiles you set up...if they involve wireless, it will enable wireless every so often to check access points etc....or if you are using a location profile, it will enable gps every so often to check your location. You can change how often everything polls in the settings.
I have mine as per the first post, so it does scan for wireless every so often, and I havent seen any change in battery usage.
the_scotsman said:
Yep, you also have to create another to say disable screen rotation when the screen is off.
Click to expand...
Click to collapse
Can you go step by step what you do to set up display off and rotation off?
Hi,
the last NetRipper Kernel has no freezes!!
Is not overclocked, is not undervolted, has no axi and has no freezes.
with friendly greet
starbase64
starbase64 said:
Hi,
the last NetRipper Kernel has no freezes!!
Is not overclocked, is not undervolted, has no axi and has no freezes.
with friendly greet
starbase64
Click to expand...
Click to collapse
Thanks, but i prefer to have axi and undervolt
And I have no freezes
the_scotsman said:
Hehe yep, it's an easy one.
New Event profile > Display off is the Event. Action is disable rotation
Click to expand...
Click to collapse
I can find everything else exept "disable rotation" in Actions. I only found "display rotation" in settings. Any help?
tzic said:
I can find everything else exept "disable rotation" in Actions. I only found "display rotation" in settings. Any help?
Click to expand...
Click to collapse
Yea, thats the one..just choose that one and set it to "off" in the settings for it
ty for the quick reply scotsman, I ll report back in a day or two.
Tried this, but didnt work
I tried many different versions of kernels but in all if I keep my phone on standby (screen off) for a long time, say 20 mins, my phone freezes, My hardware buttons still glow on press, but phone never wakes up, any Ideas??
Even you disable display rotation, the sensor is still active, just use Gscript and disable sensor, you won't get any more freeze.
justwonder said:
Even you disable display rotation, the sensor is still active, just use Gscript and disable sensor, you won't get any more freeze.
Click to expand...
Click to collapse
I was just about to write exactly the same words!
Scotsman - can you tell if Tasker can run a custom written script, upon some event? Then we can use it to turn off the gsensor!
Finally seems to be workin!!I made 2 changes:
1) Upgraded my radio from 2.08 to 2.12 (I recommend this one)
2) Stopped GSensor with Gscript
Another issue,
After I restart the sensor via script, photos in album wont rotate anymore!!
I did a `ps -ef|grep akmd` and the process is running, any thoughts??
edit: it works after restart!!
did you use the free gscript? cause mine says needs su:true
Your solution is great thanks... i did something slightly different : using tasker, autorotation is enabled only for apps that I want too, like gallery. Rest of the time, its off and working great that way too.

Tasker - automate your phone

One of the best apps in the Market for android is Tasker. Needless to say what transformation cand your phone get by using this app. You can see that here:
http://tasker.dinglisch.net/
and you can get it from here:
https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm
I was just trying to find a collection of profiles for O1 and it seems there isn`t one, so why not having it right here.
So let`s get the best from our O1 by sharing the profiles we can use for different tasks. Practically there is no limit to what we can do with the phone using that app.
I also recommend you should post your system configuration because some tasks may not work on some roms, kernels etc.
LET YOUR SMARTPHONE BE SMART!
For people using ICS Roms, go to sttings>language and input method>text transformation result and select Pico TTS so you enable voice on Tasker.
I`ll start with a simple profile to make you phone stop ringing by turning it face down:
For this Context, you would choose State, then pick Orientation. You'll get the options you see at left. For this example, "Face Down" is a pretty deliberate action you take with your phone.
For the tasks, you can add "Bluetooth" and "WiFi" from the Net menu, set to Off, "GPS" from Misc set to Off, and set the volumes for "Media Volume" and "System Volume" to 0 from the Audio menu. If you'd like, you can re-order the tasks in priority by pressing and dragging them up the chain. In this case, I moved the volume-to-0 tasks up higher, since silencing the phone was the most important thing to do. Hit Done, and you're all set.
And there you go! Just flip the phone on it`s face to make it silent.
All the profiles listed below can be found here
http://tasker.wikidot.com/profile-index
Simple
Use different ringtone for callers not in your contact list
Button to turn 3G Data Connection on / off
Wi-fi Button for home screen
Full silent mode button (turns off ALL sound including media and notifications)
Battery icon on home page that shows exact %
Birthday alert from google calendar.
Auto Respond to Received SMS while driving.
Speak Weather in the Morning
Add Calendar Entry Based on another entry (rename if necessary
Lock An Application
Start the Day with a Particular Application
Battery Full Alert
Launch Music App When Headset Inserted
Launch Menu of Music Apps When Headset Inserted
Keep screen awake when using the keyboard
Speaking Clock for Android 1.5
Control Keyguard (scroll to unlock) when Power is Connected/Disconnected
Keep Multiple Backups of Tasker Config
Change Ringtone on Every New Call
Mute in Meetings
Hold Ringer Volume Down
Auto-Respond To SMSs At Night
Change Volume Levels during Different Times of the Day
Check Data/SMS/Minute Usage With Carrier While Sleeping
Temporarily max brightness of screen during Incoming Call
Auto (Silent) Sleep Mode with Exceptions
Always ring loudly for call from important contact
Blocking Calls
Camera Gesture
Automatically turn off Bluetooth
Connect2Wifi: task with loops and feedback if connected or not
Intermediate
This will retrieve your location then post to xml file and send location via sms 1/9/2012
Find weather for next two time periods for your current location and speak it. (Using HTTPGet)
Keep volume low when using headphones
Repeat Caller Name
Power Plug In - Choose Car/Home/Night Mode
Generic Toggle Widget
Open the keyboard and start texting
Set volume then Launch menu of music apps
Alarmclock without Snooze
Alarms with Snooze and Vibrate
Geburtstagserinnerung (German)
Car Locator
Notification Reminder Pulse
Locate your phone using SMS and google maps
Lock your phone and locate it by SMS and sound
A full talking clock
Act like a docking station when plugged into USB
Auto answer calls when your bluetooth headset is connected
Extended phone profile changer with Notification and Widget
Turn your cell phone into a Voip phone
Create KML files for Google Earth
Enhancing battery life using Tasker
Missed Notification Reminder
LocateMe Log, Track And Emergency Button
Daily Reminder SMS e.g. for birth control
Total Wifi and Mobile Data Sync Control
The Ultimate Alarm Clock
Boost SD Card Read Cache
Automatically Send an "I'll be Home Soon" SMS
Nandroid Backup whilst you sleep with file management
Keyguard Delayed Enabler (with ready-made task for a Keyguard toggle widget)
Gmail/SMS/Call Notifications with "Minimalistic text"
The Deep-Sleep-Detective
Text me when you get home!
Juice Defender inspired Battery saving
Clock in and Clock out - create a calendar entry with event start and event end times
Disable keyguard when you are at work/home
Advanced
Record Phone Calls (legal)
Periodic Data Check (Juicedefender Replacement)
Periodic Data Check with Widgets (Juicedefender Replacement)
Creates profiles similar to S60 devices and changes them depending on variety of factors
U.S. Navy Ships Bells (Using Tasker's OR '/' feature) * Pattern Matching *
Changing background image depending on current weather (Using HTTPGet)
Find weather for your current location automatically (Using HTTPGet)
Set up an alarm clock that adapts to inclimate weather (Using HTTPGet)
Aumatically start / stop your WIFI when you are at home with limited battery use
Enable WIFI when within cell tower range for multiple access points, minimal battery use
Balance wifi usage and data check (Update)
CPU control profiles for governor and frequency
Tasker as an Automated Task Manager
Blackberry-like Sound Profiles
Automatically change display brightness while plugged in depending on time of day
Automatically respond to texts with street address
Expert
iTANCard
Am I the only one who thinks that an app doing something at absolutely anything you do with the phone, this is not draining, it just uses 100% of the CPU when you flip the phone...
And lets not mention that, to make phone silent when turned upside down means it has a permanent wakelock, and sensor constantly finding what is the position etc...
At the end, you will have a very smart phone, but you won't be able to answer a call, because when answering phone must change all the settings, and then reboot, and... whatever, this thing sucks! Just like juice defender, but it is oriented 100% on losing performance and battery and control over the phone...
Oh you can try to make it do a factory reset every day if it is so smart
.........
vlt96 said:
Am I the only one who thinks that an app doing something at absolutely anything you do with the phone, this is not draining, it just uses 100% of the CPU when you flip the phone...
And lets not mention that, to make phone silent when turned upside down means it has a permanent wakelock, and sensor constantly finding what is the position etc...
At the end, you will have a very smart phone, but you won't be able to answer a call, because when answering phone must change all the settings, and then reboot, and... whatever, this thing sucks! Just like juice defender, but it is oriented 100% on losing performance and battery and control over the phone...
Oh you can try to make it do a factory reset every day if it is so smart
.........
Click to expand...
Click to collapse
Read first, post after. Tasker app does not keep your phone awake as most tasks are set to trigger while it is awake and the display is on. Like the task to open automatically wifi when you open your browser or xda app and set it off after closing those apps. And when setting triggers based on power settings or time, the wakelocks are not constant, being activated just like alarm wakelocks. In fact you can set smart alarms too. Or actions based on calls/sms/mms received from specific ppl at specific times etc., or actions based on gestures set by you, proximity sensor ...
Tested wakelocks with BBStatus and no wakelocks, the phone goes to deep sleep. Tested cpu freq with Cool Tool and max freq is used only when starting the triggered app or doing the task set. In the rest of the time the freq oscillates normally.
And please do not make comments on any app based on how other apps behave. Try it then post.
If anyone is using this app, post your profiles or the ones you think are usefull.
nice thread! let me share my fav profiles
@vlt
Yea, you are the only one who thinks it because otherwise the app wont get 4-5 stars at always if it is battery consuming also, just because the developer had explained clearly how the tasker consume battery. its in the userguide inside and im vrry satisfied with it.
@voyager
tasker is just amazing to me ive been using it for long because it really makes my phone even smarter.
undoubtedly yes, using sensors as a context is the most battery comsuming but we can Limit the use of its detection by ourselves. not mentioning its pre-installed functionality that it wont detect when screen off, for your silent mode thing we can add another context - how about only when our launcher is in the foreground? that makes things even easier
now im glad to share my most frequently used profiles (not giving you guys my private ones XD) including
- vibrate 0.3 second with a little toast msg when power is plugged
- vibrate 0.3 sec and show how much battery left with toast when power is unplugged
- weekdays auto vibration mode in the morning
- auto rotation only on browser
- temporarily disable lockscreen when specified apps are opened (my default set for u is calculator)
- CM7 camera anti-flickering (good for those who OC with stock kernel )
- brightness 80% when camera activates and restore after exit
although gestures and proximity sensor contexts are SUPER COOL, other than the time i show off to my friends xD, ive always been avoiding the sensors to eliminate any chances of over using them and cause batteries.
so, i guarantee my profiles are super battery friendly....
hehehe you must be tempted to download immediately? do it! tell me what do you think of my favourite profiles which are always activated on my P500
to import, unzip my zip and u get xml files. go to tasker, long press "profiles" tab, import, choose the xml. done!
lol dont worry abt the little tip, Miasmic never gives malicious tasks
Happy tasking!
Sent from my LG-P500 using xda premium
I suppose camera anti-flickering profile uses the OC task and downclocks the phone when opening camera right?
Nice ideea!
voyager20021 said:
I suppose camera anti-flickering profile uses the OC task and downclocks the phone when opening camera right?
Nice ideea!
Click to expand...
Click to collapse
yup!! very handy, then the clock goes back up when leaving the cam
Sent from my LG-P500 using xda premium
Miasmic said:
yup!! very handy, then the clock goes back up when leaving the cam
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
How do you change OC on it?
.........
Set a profile which is based on a context on which the task will trigger, for example when open camera, set task to set clock to 600 Mhz, then set exit app task to reset the clock back to your usual OC freq.
You can play like that with almost everything on you phone.
I use a profile to like turn in gps when i open maps and automatically close it later
Sent from my LG-P500 using xda premium
karthiknayak94 said:
I use a profile to like turn in gps when i open maps and automatically close it later
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Doesn't it have an option for network location too?
karthiknayak94 said:
I use a profile to like turn in gps when i open maps and automatically close it later
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Yap! Also can set to start wifi/data when opening browser and disconnect when closing it etc.
vlt96 said:
Doesn't it have an option for network location too?
Click to expand...
Click to collapse
Look under task>net. If not there then no.
I can't get it executes the task, the notification keep saying no active profiles. Imported missmic XML profiles (thanks to miasmic). please help, thanks....
Try setting some simpler tasks like start wifi when opening browser. Miassmic`s tasks can be set manually too.
Here`s another profile
Enable WiFi when at Home
Context: State –> Cell Near
Tap the “Start” button and move around your home as your area may be covered by several cells (the “<” sign represents the tower you’re currently connected to). You may stop it after few minutes.
Action: Net –> WiFi
Another profile which sets up a shortcut on home screen for taking instant photos, without opening camera app (point and shoot)
Long-press on the Home-screen > Shortcuts > Task
Action: Media –> Photo Series Time (So that new photos don’t overwrite the previous one and every new photo will have the time attached with its name.)
If discrete is checked, there will be no sign of the picture being taken.
Profiles i use
I attached some of my usual profiles.
What they do:
Missed call> after any missed call with display locked the phone vibrates 0.7 sec than waits one minute and says "you had one call x minutes ago" every minute for 30 minutes. Profile must be used with display unlocked profile
Display unlocked> if you had a missed call and unlock the phone the missed call profile stops
Charging>when connected to AC/usb (can be set to either or any) phone will vibrate 07 sec and say "charging"
Battery full>when connected to AC/usb (can be set to either or any) and battery reaches 100% the phone will say "battery full"
Profiles can be improved or modified easy to reach anyones expectations.
This application has a few problems like battery drain .
Another one is UI....it's a bit unfriendly by the way the cool thing is that you have that if :
if condition1 = or anything with condition 2 then execute .
Yap, a bit unfriendly, but once you now how...
Hi,
On cm 7.2, how do you set tasker to enable or disable pattern lock?
I'm on cm 7.2 since yesterday on my Desire. It's my first time on cm, actually. Before that, I used to be on HTC Desire specific roms. I'm rooted.
I've been using Tasker for quite a while, and by now I have a number of profiles that make me feel my phone is smart
Now, the big problem with Tasker is that it spoils you by doing all sorts of things automatically for you. And when a profile no longer works and you have to do things manually, you get really annoyed
And so, in that context, I have the following profile :
Profile : Home
Context : Cell Near
Variable Set %HOME to on
Wifi Set On
Secure Settings Configuration Pattern Lock disabled
Previously, before I switched to cm 7.2, this used to work perfectly, with GO Launcher and stock pattern lock. Now that I'm on cm 7.2 also with GO Launcher, Tasker can no longer act on pattern lock.
Any idea anyone?
Thanks,
Egg
SOLVED :
I solved my issue by complety removing Secure Settings and re-installing version 1.2.2 from Google Play.
So I am thinking about buying this app but.....
This app is incompatible with your device.
CTM Samsung GT-N7100
Is there a way that i could get it to work do you think before i possibly waste my money, or is it just a risk i am going to have to take?
JohnMather said:
Is there a way that i could get it to work do you think before i possibly waste my money, or is it just a risk i am going to have to take?
Click to expand...
Click to collapse
There's a 7 day trial version you can download here:
http://tasker.dinglisch.net/download.html

Launch Daydream with a Shortcut

Has anyone figured out a way to launch Daydream using NFC launcher, either directly or using Tasker or any other shortcut app?
I am using a wireless charging solution and would love to launch Daydream using NFC as I put the phone on the charger, but do not want to have daydream on all the time when it is plugged in to a wired charger.
I tried Daydream Launcher in the app store but it does not work on the S4.
Thanks.
Reviving an older post I know but....I'd also like to see this possible rather than having to go through the Settings>Display>Daydream rigmarole
I also would like to know if there is a quick or even automatic way to start daydream rather than lock screen.
Yes, daydream mode is a nice feature of Samsung, but very cumbersome to activate.
I'd like to see quick way to activate too.
Hummmm that gives me an idea, maybe a custom shortcut maker might help. Will give it a go..
Edit, I used quick shortcut maker and made a shortcut easy.
In quick shortcut maker you can do a search, so I just typed "day" and daydream showed up on the list all on its alone I hope this is what your all looking for.
Sent from my GT-I9505 using xda app-developers app
ranger4740 said:
Yes, daydream mode is a nice feature of Samsung, but very cumbersome to activate.
I'd like to see quick way to activate too.
Hummmm that gives me an idea, maybe a custom shortcut maker might help. Will give it a go..
Edit, I used quick shortcut maker and made a shortcut easy.
In quick shortcut maker you can do a search, so I just typed "day" and daydream showed up on the list all on its alone I hope this is what your all looking for.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Thanks ranger4740. :good: A shortcut sure does help.
I moved from a Galaxy Nexus to the Galaxy S4. The pogo-pin desktop dock was one of my favorite things about the GN. With Daydream, it made it into a perfect clock. So one of the first things I did when I got the GS4 was to figure out how to get as close as possible to what the GN was like in the dock.
The app Daydream Launcher launches Daydream and I was able to set up an NFC task for it using NFC Task Launcher. I also installed a clock replacement called Clock Plus that has more features than the stock clock app, such as allowing an adjustable brightness range for night mode that allows for extreme dimness--which I prefer.
I place my phone into a little plastic stand in landscape mode on my nightstand and was having problems getting Daydream to go into landscape, so I use an app called Rotate to make sure I have landscape Daydream mode when I plug in my phone and set it in the stand.
So now, I plug in my phone, unlock it, and touch an NFC tag to get where I was with my old GN and the pogo dock. Not quite as elegant, but it works fairly well.
The Secure Settings Tasker plugin allows you to toggle daydream too.
The best I was able to do with Secure Settings was go directly to the Daydream Settings page, but not launch Daydream directly, which was exactly what Quick Shortcut Maker did. This thread is about the GS4, so it shouldn't be Touchwiz that's the problem. Am I missing something?
I know there's a problem with Touchwiz messing up the simple way other versions of Android get to Daydream. Daydream Launcher is listed as incompatible with the GS4 and would not let me download it. Daydream Launcher Pro force closed. The only other daydream launching app I found let me download it and then gave me a message saying my device was not supported.
I tried using a touch-recording macro that could possibly be used in a Tasker task, but the stop button was hidden by Daydream's fullscreen window, so it wasn't useful.
I've even been looking for Xposed Framework mods to make a direct path and I couldn't find anything.
Just found this thread because I wanted to do the same
Found a solution:
Tasker + Secure Settings (https://play.google.com/store/apps/details?id=com.intangibleobject.securesettings.plugin&hl=de)
--> Install Secure Settings, Enbale System+, Set DayDream to "always", Set a Task in Tasker if Power + Wireless --> SecureSettings Toggle DayDream
So it will be on if you wireless charge and if you don't charge wirless the DayDream gets deactivated.
chrisonline said:
Just found this thread because I wanted to do the same
Found a solution:
Tasker + Secure Settings (https://play.google.com/store/apps/details?id=com.intangibleobject.securesettings.plugin&hl=de)
--> Install Secure Settings, Enbale System+, Set DayDream to "always", Set a Task in Tasker if Power + Wireless --> SecureSettings Toggle DayDream
So it will be on if you wireless charge and if you don't charge wirless the DayDream gets deactivated.
Click to expand...
Click to collapse
And I just found your post because I want to do the same! I have DayDream set to activate while charging or docked on my Nexus 6. The problem is that when the phone is fully charged, the current stops on my wireless charger and so does DayDream. Does your Tasker task fix that or does the Toggle keep it active until you manually toggle it off?
Puh.. Good question.
I don't use it anymore because my Nexus 5 are getting extremly hot if I do this...
So I can't remember how it was if the battery was full charged... But I think it worked all the time.
chrisonline said:
Puh.. Good question.
I don't use it anymore because my Nexus 5 are getting extremly hot if I do this...
So I can't remember how it was if the battery was full charged... But I think it worked all the time.
Click to expand...
Click to collapse
Thanks Chris, I guess all I can do is try it. Ideally I'd like it to activate for my wireless charger at home, but not for my wired chargers at home and in my car. If just that part works, it will be worth it.
Yeah with Tasker this should work of you have Bluetooth in your car. Tasker can than check if in car.
chrisonline said:
Yeah with Tasker this should work of you have Bluetooth in your car. Tasker can than check if in car.
Click to expand...
Click to collapse
you can also launch it from home screen its easy you have to have nova launcher installed...go to gestures & input now select a swipe gesture for example swipe up now head to shortcuts then activities now scroll down until you see system ui now tap on system ui and select day dream and you're done

[ solved ] Nova Launcher prime - double tap to sleep - how to?

as the title says - how to enable double tap to sleep (screen off) using gestures in Nova Launcher prime?
i know it has something to do with assigning an activity via Nova Launcher gestures, but i can't find any activity that relates to screen off or sleep...
any help is appreciated...
note:
i know how to do this using an extra app "Screen Off and Lock", but i just wanted to know is there a posibility to avoid any extra apps to achieve the same thing...
Download Turn Off Screen from play store and assign it to Double Tap on Nova launcher in Gesture Settings.
https://play.google.com/store/apps/details?id=com.cmcm.screenoff
Vlad Paul said:
Download Turn Off Screen from play store and assign it to Double Tap on Nova launcher in Gesture Settings.
Click to expand...
Click to collapse
i think you posted this in the same time i was writing the "note" part in my post
I think not. If i remember, it worked well without 3rd party app, but now it is "disabled". Anyway, here is another guide:
"The Nova Launcher option
Another app that functions very similarly to the way you’d use Apex Launcher is*Nova Launcher. The same as you did for the first method, you will only be able to use this one if you also installed Greenify on the device. Therefore, you should go to the Google Play store and look for these two tools and install them.
Whenever you’re ready, check the steps below:
Open Nova Launcher and go to its Settings.Click on Gestures and Buttons and scroll down to Gestures.Select Double Tap and wait for the Choose Action menu to load.Go to Shortcuts, and then click on Hibernate and Lock Screen.
You may have noticed before that selecting the right settings in the first application is going to automatically send you to the second app you need to use. In this case,*Greenify will open*a new discussion and ask you to authorize Nova to use your screen.
You should go under the Automator and click on Allow Greenfy, and then confirm this option by pressing Activate. You’re now good to go and can test if the display is working properly by double tapping to send it to sleep."
http://techpp.com/2015/03/13/android-double-tap-screen-wake-sleep-guide/
Sent from my LG-D802 using XDA Premium 4 mobile app
krija said:
I think not. If i remember, it worked well without 3rd party app, but now it is "disabled". Anyway, here is another guide
Click to expand...
Click to collapse
thanks, but i don't use greenify and this guide is more complicated than "nova + screen off&lock" option which i already use...
Easy, you don't need to use a 3rd party app. Just doubletap the status bar to sleep
You can do this in every app, whenever you want to sleep just double tap status bar
TheHaso said:
Easy, you don't need to use a 3rd party app. Just doubletap the status bar to sleep
You can do this in every app, whenever you want to sleep just double tap status bar
Click to expand...
Click to collapse
i know that but it's not confortable enough...
i even had double tap navbar to sleep (g3twb) which worked well until i started using 5 buttons navbar making it harder to hit the blank area...
It looks like you may need first of all nova launcher prime, after that , you may need greenify as well.Here is what i did and it works.
1 . Go to Nova settings>gestures and input>double tap
2 . swipe right to the shortcuts tab and then go down you may find "hibernate + lockscreen"
3 . Assign it and it works!
double tap to sleep is working for me.
hope this helps.
EvilKing009 said:
It looks like you may need first of all nova launcher prime, after that , you may need greenify as well.Here is what i did and it works.
1 . Go to Nova settings>gestures and input>double tap
2 . swipe right to the shortcuts tab and then go down you may find "hibernate + lockscreen"
3 . Assign it and it works!
double tap to sleep is working for me.
hope this helps.
Click to expand...
Click to collapse
thanks, but please read all the posts again before posting what i (we) already know and wrote
1. i already have nova prime (else - i won't be asking because gestures don't work with free version anyway)
2. i've said that i got it working with "screen off & lock" app
cheers
Screen turns off if knocked on or close to status bar when I do it.
But what is the problem with having another app installed? Its size is ridiculous and it solves your problem, and always you can hide if u dont want to see it.
fersago said:
But what is the problem with having another app installed? Its size is ridiculous and it solves your problem, and always you can hide if u dont want to see it.
Click to expand...
Click to collapse
not a problem... just wanted to know was there a way to do it without an extra app... nothing more
Hoy could use greenify to
i love when people post without reading...
Mate,
Variant: D802
ROM: @zg8 Unofficial temasek-14.51-20150708-082930
Launcher: Nova
im using Pre-Built sLim Action Screen Off for DT2S for my AOSP ROM
60nine said:
not a problem... just wanted to know was there a way to do it without an extra app... nothing more
Click to expand...
Click to collapse
Greenify is the only solution for you if your using Stock ROM
i don't plan to use aosp rom...
people - please read the posts before you suggest something already solved or written...
From the apps that I have Tasker and GravityBox can do screen off/sleep. And if you are using them already that doesn't count as an extra app, right?
Just realized this myself, one less app in my phone. I think I will go with tasker since I already run a lot of stuff with it.
MilanStojkovic said:
And if you are using them already that doesn't count as an extra app, right?
Click to expand...
Click to collapse
i don't use any of those apps
but it's nice to see extra suggestions coming in... it will surely help someone to pick a perfect app combo for this purpose...
60nine said:
i don't use any of those apps
but it's nice to see extra suggestions coming in... it will surely help someone to pick a perfect app combo for this purpose...
Click to expand...
Click to collapse
Oh man, you should try tasker. It's what puts SMART in smartphone. Was messing around today with it. I found an old buss ticket that can work as nfc tag and put it on my phone holder on bicycle. I have set it to trigger launching Strava app, turning on GPS, setting brightness to max and forcing landscape mode for that app. And when I exit app, BAM, it reverts everything back the way it was. It's like slide and click instead of multiple actions. Might be overly excited about it right now, and definitely off topic here, but had to mention it hehe. I hope you will find a way to use that gesture the way you want, everything is possible on android
MilanStojkovic said:
I hope you will find a way to use that gesture the way you want, everything is possible on android
Click to expand...
Click to collapse
if you knew how i use my device you'd be asking "why don't i use nokia 3310 instead?"
no gps, no bluetooth, no location of any kind, no gaming, half of google services blocked etc...
no vibers, no hangouts, no skypes, no syncs - some calls, few sms messages... (i mostly communicate through google chat and emails while on pc since most of my work depends on beeing on pc anyway)
i read articles, browse and listen to music 90% of the time...
call me old fashioned - but i still love to have some "human manual control" over things on my device

Question How can I automatically mite phone when I'm at work?

I'm been using iPhone for a while and there was a setting to automatically change to work mode when I was at work using the GPS. Is there any option to do that? I saw that you can set it depending on the time and an event in your calendar but not depending on the GPS.
There is an app called Llama - location profile on the play store which can automatically change your sound profile based on your GPS location, I think that is what you're looking for.
On the other side, there's Flip to Glyph

Categories

Resources