My usb port in my tab is messed up and ive found out theres microusb to usb adapters i ordered one but it doesnt fit correctly into the microusb part of my tab so i'm wondering if any of you have a microusb to usb adapter that works for this tab if so can you let me know.
I don't have such an adapter but i think this won't work, because the micro usb port has no sb host capability. It's only there to connect the tab to a pc.
Gesendet von meinem Iconia A501 mit Tapatalk 2
I have a micro usb to usb adapter and it does not recognize my usb drive when I connect it. I have also tried using the factory micro usb to usb cord and attached a female to female usb adapter to the end and then connected my usb drive to the end of that and the tablet still doesn't recognize it either.
As i said before, this won't work, because the micro usb of tha a500 does not support usb host functionallity.
Gesendet von meinem Iconia A501 mit Tapatalk 2
Actually what you said was "I think think this won't work". I said it won't.
Thanks for helping me out.
Related
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Mr_Maz said:
It seams that the change to the MHL cable is to allow USB on Go with the same cable
http://www.gottabemobile.com/2012/06/29/galaxy-s-iii-new-mhl-connector-also-enables-usb-on-go/
Click to expand...
Click to collapse
I had a bunch this was the case! Thanks for confirming.
Sent from my GT-I9300 using xda app-developers app
But how would one plug a usb cable into the hdmi port?
The_Biz said:
But how would one plug a usb cable into the hdmi port?
Click to expand...
Click to collapse
there is a MHL adapter that gives you a male 11 pin micro USB to female HDMI so you can just plug a standard male to male HDMI cable from adapter to TV.
see:
Samsung Galaxy S III MHL to HDMI adapter
Does anyone know if this new adapter will work with the Galaxy Nexus, as well? Also, does it charge the phone--or at least keep it from being drained--when USB OTG is being used? I've been looking for a way to use USB OTG with a flash drive on my GN while also charging/powering the phone. USB OTG is a real power hog.
It should, but on mine it doesn't.
I've got a new MHL cable and a USB OTG cable in the hope I could plug my MHL into the SGS3, use a powered USB hub connected to the Micro USB on the MHL and then connect a keyboard and mouse into the USB hub, then connect the HDMI to the TV.
For me it doesn't work. I thought this was the whole reason they changed the MHL cable to the new type. Can anyone else confirm?
Logicalstep
can we get an update on this situation here? How
can we get MHL AND USB OTG?
My reading of the link is that the micro USB port has been repinned to provide USB on the go and not that the cable allows for this.On the mhl cable there is a female HDMI port and a micro USB ( both female) which must be used by the charger.
If the usb connection is also female type, we have to use a usb otg cable to get it work. But at the moment my phone also wont recognize any devices -.-' only mhl and nothing else.
I bought this adapter for 25 euros and want to have it working.
I also asked samsung on facebook 'bout this problem, and everything the told me:
Go support site...
very helpful.
I hope the will enable this feature in a future update.
Hi.
I have a otg cable and USB storage device and I can't use it on my s4 , when plugging in the otg it says USB connector connected. But when I connect an USB drive to it it says nothing and I can't get in the otg. It worked on my note 2 but people say the problem is the mhl 2.0 but the note 2 has the same mhl 2.0
Please help me.
Sent from my GT-I9505 using xda app-developers app
I don't understand what is this detectable otg cable you are talking about. I have simple cheap converter from microusb to normal usb. This converter is not detected by itself by the phone. I just use it to plug pendrive to phone's microusb and everything works. GT-I9505
Hello
Apologies if this has been asked before. I can't find a definitive answer...
Has anyone managed to get access to an USB memory stick on the OnePlus 2 actually working?
I've just received my OnePlus 2 and have rooted it etc. I have bought a couple of USB type C to USB A female sockets, both claiming to support OTG. However, neither of them appear to work. I've tried with a number of different USB sticks, some of them with indicator LEDs on them. When plugging them in, the LED indicator stays off and there is no extra drive in settings/storage, even after ticking the OTG check box.
I have booted to TWRP recovery and tried to mount the OTG storage. The phone vibrates and the check box immediately disappears...
I'm not sure if I'm missing something here!
The two items I have tried are:
1. http://www.amazon.co.uk/gp/aw/d/B00VGF2UPQ
2. http://m.belkin.com/uk/p/P-F2CU036/
Thanks for your time
Dan
Sent by my 1+1 via Tapatalk
Similar situation with me too:
So I have both of these adapters:
http://www.amazon.co.uk/gp/product/B00W5BL1N2?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
http://www.amazon.co.uk/gp/product/B00XLF1BZ4?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
Neither seem to work for me? I am trying to connect to a flight control board, so using a normal USB -> Micro USB, but the boards in question do not receive any power, nevermind data!
Any ideas?
Grr....
it seems that the problem is that does not support USB 3.1 (and do not know if not 3.0), the adapter must be old (not blue)
Both the OTG adapters I have support USB 2.0/3.0 and 3.1, but neither of them work.
What you are saying is you need a USB Type-C 2.0 adapter? Not seen those anywhere, are you sure they exist?
Same here. Doesn't work, using an adapter with a micro USB OTG cable doesn't work (this combo cable/Kingston USB 3 key works very well with OPO)
And it doesn't work either with this OTG cable
http://www.amazon.fr/dp/B011BASJQ4/ref=pe_386181_51767671_TE_dp_1
i tried a usb 2.0 otg with a micro usb to usb type c adapter on a usb 2.0 flash drive and still no luck getting the otg to work
I am using the oneplus adapter and it reads the otg but is stuck on checking it for errors.
Alaris said:
I am using the oneplus adapter and it reads the otg but is stuck on checking it for errors.
Click to expand...
Click to collapse
What cable is that? OnePlus only have a Micro USB one?
Addicteddddd said:
What cable is that? OnePlus only have a Micro USB one?
Click to expand...
Click to collapse
I am using the micro to type c adapter and plugging it into my otg cable.
Sent from my ONE A2005 using Tapatalk
Stupid question but did you guys enabled otg option in your storage settings. I just received my Oneplus 2 yesterday and I saw that setting and enabled it. I am still waiting for OPO's C adapter that's out of stock on Amazon India and only then I can verify whether that really does make a different or not.
nicesoni_ash said:
Stupid question but did you guys enabled otg option in your storage settings. I just received my Oneplus 2 yesterday and I saw that setting and enabled it. I am still waiting for OPO's C adapter that's out of stock on Amazon India and only then I can verify whether that really does make a different or not.
Click to expand...
Click to collapse
Yes, read the end of the 1st post...
I've now tried with OTG micro usb adaptors that work with other phones and a C->micro usb cable. Nothing works [emoji22]
Sent from my ONE A2003 using Tapatalk
I've just tested this adapter from this brand PQI... it's USB 3.1 Type-C to USB Type-A female. OTG works, but I am unable to eject my flash drive in ES Explorer...
Other than this, my no-brand USB Type-C to USB Type-A cable adapter doesn't work for OTG...
Guys has anyone tried this www.aliexpress.com
they have original oneplus Type-C Adaptor for $8.99 USD with free shipping (to india dont know about other country).
Click here
they also have
Xiaomi Micro USB to Type-C Type C Adapter for $3.99 USD with free shipping (to india dont know about other country).
here
Edit : I Tried this and received an original oneplus adaptor, I recommend this site.
Regards,
Shailesh
I've got similar issues. Tried using a proper Duo USB flash drive (USB one side..and Type-C on the other) and nothing. Tried OTG cable that I got online...and it fails to detect.
http://www.ebuyer.com/717886-datatraveler-microduo-64gb-3c-usb-3-1-dtduo3c-64gb
was the USB stick (which in every single way should work...without any kind of OTG adapter/whatever.
and then...
http://www.ebay.co.uk/itm/201444248140
which says it supports the OnePlus 2.
It's not looking good....
Cheap Type-C Adapter with OTG support.
Hey Guys for people in India, i found a cheap Type-C Adapter with OTG support.
i bought it and can confirm that OTG works.
Here is the links.
This has adapter & USB-A to micro USB
And
This Link is Just adapter
Edit:
i ordered this product again for my friend but it didn't work. I wouldn't recommend buying this anymore.
Click Thanks If this helps
shailm_85 said:
Guys has anyone tried this www.aliexpress.com
they have original oneplus Type-C Adaptor for $8.99 USD with free shipping (to india dont know about other country).
Click here
they also have
Xiaomi Micro USB to Type-C Type C Adapter for $3.99 USD with free shipping (to india dont know about other country).
here
Regards,
Shailesh
Click to expand...
Click to collapse
I order this one on October 31st. I'm still waiting for it. I don't have very high hopes that it will work....
http://www.aliexpress.com/snapshot/7018279289.html?orderId=70271999865589
Description doesnt say anything about OTG.
But lets see what happens, good luck.
Any Luck?
I have tried all sorts of OTG cable, from the original OTG cable with powered up 1Tb storage.... None of them work... However they all work on my OPO...
arbolarc said:
I have tried all sorts of OTG cable, from the original OTG cable with powered up 1Tb storage.... None of them work... However they all work on my OPO...
Click to expand...
Click to collapse
My 2tb storage worked with mi c adapter but it shows only the first partition but I have two positions, so I am gonna make it one amd use it that way.
Sent from my "GT-I9300/1+2" powered by Carbon/Blisspop Rom & Boeffla/ak Kernel
Fueled by 7000mAh ZeroLemon Battery
nicesoni_ash said:
My 2tb storage worked with mi c adapter but it shows only the first partition but I have two positions, so I am gonna make it one amd use it that way.
Sent from my "GT-I9300/1+2" powered by Carbon/Blisspop Rom & Boeffla/ak Kernel
Fueled by 7000mAh ZeroLemon Battery
Click to expand...
Click to collapse
What do you mean by the c-adapter? How do you connect it? C-adapter connect to an OTG? Or the OTG is integrated with c-adapter in it?
Cus I bought a separate c-adapter then connect to my micro USB OTG cable..
I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Glops4 said:
I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Click to expand...
Click to collapse
I don't know if that has changed but for cm you have to use an app like StickMount to be able to mout the USB stick.
Ok thanks, I guess I have to root then.
I used only es file Explorer and it worked for me. I testet Ext hdd, mous, keyboard and controller
Same, no root required, just an usb C OTG and a file explorer. Be aware that the OTG or the device could be uncompatible...
Glops4 said:
I bought a type-c adapter for my Z1 to use OTG cable and Usb key. The key does not power on. I tried the adapter to charge the phone with a regular usb cable and it works.
Is this problem related to COS or is OTG function not supported on the Z1? Or is there a way to enable it?
Click to expand...
Click to collapse
I bought a USB-C to USB-A Converter and it works for me. Official USB type-c adapter has no support for OTG.
hfutxqd said:
I bought a USB-C to USB-A Converter and it works for me. Official USB type-c adaipter has no support for OTG.
Click to expand...
Click to collapse
This might be the proper solution, it seems.
" type-c adapter for my Z1 to use OTG cable and Usb key"
What speed did you get to ?
Lenovo Zuk Z1
I tried Xiaomi USB typeC adapter with a SanDisk micro USB memory and it doesn't work
I have the same problem.At my oneplus 2 with adapter working normal but at Z1 not working.
No solution about that ? I got 2 adapters now (noname and Victsing) but still no otg, and usb storage options are unavailable !
Does it support in twrp recovery.. i mean does otg recognising in twrp...???
Strange, it should work out of the box on COS 12.1...just received my second Zuk1 and hooked up the Z1 to my car to read out the ECU, it worked without an hitch! Did not try a USB stick though...
I have 2 cables, one is with the micro USB for which I use a micro USB to type C USB adapter, the second USB OTG cable already has already the Type C connector and connects straight up.
I never used my "charging cable" as the idea is to plug your USB stick straight onto the OTG interface cable.
i have rooted/unlocked zuk z1.
tried every possible stuff (es file explorer,stick mount, usb troubleshooting etc), tried changing the otg cable, tried changing pendrives, nothing helps.
can anyone please help me?
xda is my only hope
I change my phone to xperia x compact recently, I find the type-c USB is easy to use.
I have a otg usb drive with micro usb, which is working on samsung s7, dell tablet. I wonder if it can be used on XC.
Thanks
Not sure about your micro USB OTG drive, but I purchased a separate OTG type-C adapter which connects to my USB card reader just fine.
I tried to use a type-c to micro USB adapter, it doesn't work. Maybe I have to buy a type-c otg adapt first.
jiangjun413 said:
I tried to use a type-c to micro USB adapter, it doesn't work. Maybe I have to buy a type-c otg adapt first.
Click to expand...
Click to collapse
Yes I previously tried an adapter which failed as well
itandy said:
Not sure about your micro USB OTG drive, but I purchased a separate OTG type-C adapter which connects to my USB card reader just fine.
Click to expand...
Click to collapse
May I know what brand is your adaptor? I tried a couple of OTG type-C microSD card readers, but none of them work.. it simply don't seem to be providing power to the adaptor.
I could use a mouse using:
mouse -> usb to micro usb otg from z1 compact -> micro to usb c adapter
trewelu said:
I could use a mouse using:
mouse -> usb to micro usb otg from z1 compact -> micro to usb c adapter
Click to expand...
Click to collapse
Even this doesn't work for me. My phone seems not being able to act as USB host and not recognising anything plugged in the type-c port. My phone is rooted, not sure if it's the cause.
I use the sony type-c dual flash drive and it works flawlessly
Still not working. I used a voltage reader and found that there is no voltage coming out of the USB port, no wonder it won't detect anything. No sure if my phone is faulty (doubt it, as the port works perfectly when it is USB client) or due to setting/rom/kernel...
Sent from my F5321 using XDA Free mobile app
dohanin said:
May I know what brand is your adaptor? I tried a couple of OTG type-C microSD card readers, but none of them work.. it simply don't seem to be providing power to the adaptor.
Click to expand...
Click to collapse
Do you have a pop up screen asking you what to do when you connect anything to the USB port?
BTW, my USB OTG adapter is of a brand REMAX.
no, nothing happens as if the phone does not know something is connected. but works ok when connected to another host (pc or power source)
i'm using rooted 7.1.1 stock rom
Sent from my F5321 using XDA Free mobile app
itandy said:
Do you have a pop up screen asking you what to do when you connect anything to the USB port?
BTW, my USB OTG adapter is of a brand REMAX.
Click to expand...
Click to collapse
Thanks! Finally i got it to work. Sorry that I had been trying type-c usb reader instead of a true type-c otg adaptor + reader... so, it fact it would work with a type-c otg adaptor.