To all friends I follow these steps and 100% CWM based recovery v.4.0.1.5
http://sanfranciscoandroid.co.uk/an...cisco-ii/restore-qcn-orange-san-francisco-ii/
I try nearly all things here non works, this ONE 101%
is the recovery the orignal CWM or the recovery based on CWM?
Related
I'm on CM10.1 20130709-Nightly-mb526
i want to install latest CM11 ,as per instructions i need to update recovery before flashing CM11 so i updated recovery as mentioned in CM11 thread with my present recovery(TWRP) and rebooted my phone
but after reboot .when i select TWRP Recovery in bootmenu there appears a black screen for a while and again boots to my present cm10.1 rom
i tried installing the recovery by 2ndInit ,TWRP by GooManager but they didn't work for me.
plzz help me...I'm very eager to try Kitkat as soon as possible my Moto Defy
lakshmantheonly said:
I'm on CM10.1 20130709-Nightly-mb526
i want to install latest CM11 ,as per instructions i need to update recovery before flashing CM11 so i updated recovery as mentioned in CM11 thread with my present recovery(TWRP) and rebooted my phone
but after reboot .when i select TWRP Recovery in bootmenu there appears a black screen for a while and again boots to my present cm10.1 rom
i tried installing the recovery by 2ndInit ,TWRP by GooManager but they didn't work for me.
plzz help me...I'm very eager to try Kitkat as soon as possible my Moto Defy
Click to expand...
Click to collapse
You should've flashed CM10.2 and then update recovery and then CM11!
Danarkin22 said:
You should've flashed CM10.2 and then update recovery and then CM11!
Click to expand...
Click to collapse
But now i can't because there is no recovery on my phone to flash cm10.2
lakshmantheonly said:
But now i can't because there is no recovery on my phone to flash cm10.2
Click to expand...
Click to collapse
Then , flash SBF , root , install 2init , and after that flash CM7 , CM10.1 , CM10.2 and CM11.
If you need tutorial , tell me.
While starting to upgrade from CM10 to CM10.2/10.3 on MB526, I flashed TWRP zip file downloaded from Team-win website.
steps:
1) downloaded recovery and copied to SDcard.
2) reboot into custom recovery (CWM)
3) Flash zip of TWRP recovery
Since than, I am getting black screen after clicking on custom recovery from Bootmenu.
Device is working fine,
but with no custom recovery, my hands are tied...
can't restore backup, can't flash rom or do anything..
tried installing zip from stock recovery.. Installation aborted appears
Is there any solution to get recovery working without starting from scratch (flashing SPF and 2ndinit, and so on.... )
warewolf4586 said:
While starting to upgrade from CM10 to CM10.2/10.3 on MB526, I flashed TWRP zip file downloaded from Team-win website.
steps:
1) downloaded recovery and copied to SDcard.
2) reboot into custom recovery (CWM)
3) Flash zip of TWRP recovery
Since than, I am getting black screen after clicking on custom recovery from Bootmenu.
Device is working fine,
but with no custom recovery, my hands are tied...
can't restore backup, can't flash rom or do anything..
tried installing zip from stock recovery.. Installation aborted appears
Is there any solution to get recovery working without starting from scratch (flashing SPF and 2ndinit, and so on.... )
Click to expand...
Click to collapse
I think stock recovery can't help you now, you should start from scratch...
It isn't so hard, just takes time...
From CM10 to CM10.2, you don't need to change recovery, just install it. From CM10.2 to CM11 you should install update-recovery.zip, reboot, install CM11 + GApps.
Hope it helps... :highfive:
warewolf4586 said:
While starting to upgrade from CM10 to CM10.2/10.3 on MB526, I flashed TWRP zip file downloaded from Team-win website.
steps:
1) downloaded recovery and copied to SDcard.
2) reboot into custom recovery (CWM)
3) Flash zip of TWRP recovery
Since than, I am getting black screen after clicking on custom recovery from Bootmenu.
Device is working fine,
but with no custom recovery, my hands are tied...
can't restore backup, can't flash rom or do anything..
tried installing zip from stock recovery.. Installation aborted appears
Is there any solution to get recovery working without starting from scratch (flashing SPF and 2ndinit, and so on.... )
Click to expand...
Click to collapse
Start from scrach >.>
I have searched everywhere and end up with the same problem every time I try to install a custom recovery. I try many different recoveries and only old TWRP recoveries will boot but will not allow me to flash roms. I was using a modified custom recovery for the longest and was the only one I've managed to use, it was 3.0.1 IIRC by kinglilrowrow. Using this recovery I could flash roms. Now I can't find this recovery anywhere. Currently I can only boot into recovery using First Aid from the forum but have not been able to flash any roms.
Finally was able to flash TWRP 3.0.2-2 not sure how it worked. Went back to stock recovery and oxygen rom then followed the same guide but it worked this time. All the info and files from XDA so big thanks to the site and developers.
Sounds like you where stuck on the old bootloader, which would explain why newer recoverys didn't want to boot. Should have been solved by updating to OxygenOS 3. ?
Hello, I'm Spinoni31 and this is my first thread.
I've got some problems whrn trying to install some custom roms available here on this forum.
I'm using mparus twrp 3.0.3 beta from the unofficial lineageOS 14.1 thread in the roms section
the problem is that when i flash a custom rom, the flashing itself is completed correctly on the recovery, but when i try to reboot the system, my phone reboots directly into twrp without pressing the Vol. up + Power button combination. I've also tried installing other roms from this forum, but the result is the same (Meaning flashing in the recovery works fine, when i reboot i get kicked back to twrp).
I Know how to flash roms only in CWM (Because of another phone that i had with that recovery).
Can someone please guide me through the procedure of flashing a rom on twrp?
Thanks in advance, Spinoni31.
Spinoni31 said:
Hello, I'm Spinoni31 and this is my first thread.
I've got some problems whrn trying to install some custom roms available here on this forum.
I'm using mparus twrp 3.0.3 beta from the unofficial lineageOS 14.1 thread in the roms section
the problem is that when i flash a custom rom, the flashing itself is completed correctly on the recovery, but when i try to reboot the system, my phone reboots directly into twrp without pressing the Vol. up + Power button combination. I've also tried installing other roms from this forum, but the result is the same (Meaning flashing in the recovery works fine, when i reboot i get kicked back to twrp).
I Know how to flash roms only in CWM (Because of another phone that i had with that recovery).
Can someone please guide me through the procedure of flashing a rom on twrp?
Thanks in advance, Spinoni31.
Click to expand...
Click to collapse
Tienes que flasear con recovery Philz Touch
I try flash phliz touch but my screen is black and only vibre
Have a true phliz touch for flash?
jomhuur said:
I try flash phliz touch but my screen is black and only vibre
Have a true phliz touch for flash?
Click to expand...
Click to collapse
Me too help us pls where are we do wrong?
choose boot to recovery ( Not System ) option from twrp itself it will boot directly to system .
stock recovery is replacing twrp recovery no matter how many times i flash it does the same . i am doing everything correctly the twrp is booting and i did a backup using it.
But after starting the system and booting to recovey .twrp is being replaced by stock recovery
REDMI 7a indian model
recovery is from mokee rom thread