I have my acer a500 with ics bootloader with flexreaper ICS 4.0.3 http://forum.xda-developers.com/showthread.php?t=1517181&page=330
It has been working fine for about a week. I turned it on today and it keeps "booting recovery kernel image". When I google my issue it leads me to http://www.xda-developers.com/android/a500-public-recovery-for-a500-owners-running-ics/ which does not help. I have booted it into safe mode via power and Vol +. I have wiped data back to factory image and also reinstalled from zip file. Still nothing. Any help would be appriciated.
ssprice said:
I have my acer a500 with ics bootloader with flexreaper ICS 4.0.3 http://forum.xda-developers.com/showthread.php?t=1517181&page=330
It has been working fine for about a week. I turned it on today and it keeps "booting recovery kernel image". When I google my issue it leads me to http://www.xda-developers.com/android/a500-public-recovery-for-a500-owners-running-ics/ which does not help. I have booted it into safe mode via power and Vol +. I have wiped data back to factory image and also reinstalled from zip file. Still nothing. Any help would be appriciated.
Click to expand...
Click to collapse
Are you running an "unlocked" bootloader? If so, you can fastboot a recovery image.
Also, if you installed a stock rom again, you have to delete the boot-recovery file in system as stated in civato's thread, or else it will wipe out your recovery image on boot.
So need some more info from you. Bootloader version, rom, etc.
MD
Related
My Iconia has CWM installed. I used it a while ago to install the leaked ICS rom. I tried to install the most recent (official) ICS rom. Now my Iconia will not boot past the Iconia logo. I've loaded CWM and formatted everything and reinstalled the official rom. No go.
I figure at this point I have to use nvflash to install a new recovery image and rom. Could somebody tell me how to do that and what files to get?
Thanks
Before doing anything else have you tried wiping cache and data? Has worked for me when a rom wont boot. Have you still got cwm can you access it? If no cwm you can accomplish this by holding power and volume up then toggle the rotation lock.
Yes, I have access to CWM. I have tried wiping everything. I even successfully installed a new rom. The device still will not boot past the Acer logo.
I booted wit hte method you described. Two messages appeared in quick succession, "Clearing data..." and "Clearing cache". After the cache message, the device just sits there doing nothing at all.
Previously I had the data partition encrypted. Could that be causing trouble?
did you install an ICS bootloader?
I'm not sure. That is why I created this thread. I'm looking to get the recovery and OS image necessary to get this device working again.
As the previous poster noted, have you switched to the ICS bootloader? When I flashed my A500 with an ICS rom it too got stuck in a bootloop. I then discovered that I actually had to flash the ICS bootloader berfore installing the new rom.
vangorra said:
My Iconia has CWM installed. I used it a while ago to install the leaked ICS rom. I tried to install the most recent (official) ICS rom. Now my Iconia will not boot past the Iconia logo. I've loaded CWM and formatted everything and reinstalled the official rom. No go.
I figure at this point I have to use nvflash to install a new recovery image and rom. Could somebody tell me how to do that and what files to get?
Thanks
Click to expand...
Click to collapse
You can't install official ROM with CWM. You need Acer recovery! This issue has been answered several times. Use search button!!!
Please help me i am in boot menu of my Acer A500 and i don't know what can i do my Acer whene i push power bouton i am blocked in this meni :
Skrilax_CZ's bootloader V8
Booting primary kernel image
please help me to complet installing JB rom
Same issue here...Just tried flashing the new kernal in Goo Manager as well as a new ICS build within TWRP, and I'm hung at the same screen.
Time to do some homework. Any help is appreciated.
OK, got this working. Basically, it all boiled down to a bootloader issue. I was using an older bootloader with a JB ROM. Bad idea! I was able to get into recovery by doing a vol down+pwr to boot it up, then selected an older ROM from my SD card to get it back up and working.
I then poked around for updated bootloaders, and snagged v8 ICS bootloader.
I applied that guy, wiped the device, installed CM10, gapps for ICS and everything worked.
Hi awesome XDA dudes
I've searched the forums, and even posted in the basic QA section to no avail. I may have just missed it somewhere, but here is the issue.
Tablet will work fine in Lightspeed 4.8 ROM. No issue there. But, when I try to get into the recovery (power and volume down) I get "booting recovery kernel image," forever.
I recently changed from the Clockwork to TWRP recovery and that is when the recovery function would no longer load.
How can I get back to Clockwork or smililar so that I can put a different ROM on my tab?
Thanks in advance!
Tom
Fixed this problem, only to find another.
So, since my tablet would still function normally (aside from recovery) I downloaded the Acer Recovery Installer App. And this did what everything else failed to do. It installed Clockwork Mod and I was actually able to get into the recovery. Whew!
So I went to install Flex shockwave ROM but the install froze at the Aroma 2.56 stage...forever. Tried again unsuccessfully and gave up. I did properly wipe and format beforehand. I then tried installing CM10 Rom, same exact problem.
So, I used Acer Recovery installer and loaded the TWRP recovery. Here is where things get interesting. I booted into recovery, wiped data and caches, and tried to install the aforementioned ROMs. Each time, Aroma installer worked fine and I was presented with all the install options, all the bells and whistles. After completing my selections, I was prompted to reboot.....
And each time the tablet hangs on the Acer spalsh screen.
So now my problem is reversed. I have access to recovery, but no ROM. :crying:
SOLVED !!
tfbielawski said:
So, since my tablet would still function normally (aside from recovery) I downloaded the Acer Recovery Installer App. And this did what everything else failed to do. It installed Clockwork Mod and I was actually able to get into the recovery. Whew!
So I went to install Flex shockwave ROM but the install froze at the Aroma 2.56 stage...forever. Tried again unsuccessfully and gave up. I did properly wipe and format beforehand. I then tried installing CM10 Rom, same exact problem.
So, I used Acer Recovery installer and loaded the TWRP recovery. Here is where things get interesting. I booted into recovery, wiped data and caches, and tried to install the aforementioned ROMs. Each time, Aroma installer worked fine and I was presented with all the install options, all the bells and whistles. After completing my selections, I was prompted to reboot.....
And each time the tablet hangs on the Acer spalsh screen.
So now my problem is reversed. I have access to recovery, but no ROM. :crying:
Click to expand...
Click to collapse
Ok, so I had a working ROM but my recovery was fried. So, using Acer Recovery Installer I was able to get a working recovery going.
Then the next problem was that I could not get CM10 to install. When I realized I needed to flash the bootloader (and yes fellow noobs this is different than the recovery) I was unsuccessful.
I tried the automated route using the Blackthund3r app, but the process would just hang at Entering bootloader.
I tried the manual NVFlash route provided by Dibbs and it would get past this point and then hang.
So Dibbs (thanks dude) helped me out via email and suggested I download babsector.rar
After I extracted the rar file, I saw the A501 A.bat file and flashed it. This provided me with hope as it flashed the tablet and the screen atcually read "PASS." But, I wasn't done yet as I still could not install CM10. So, back to APX mode and back into the babsector rar folder. I flashed the Tab with A501 B.bat and followed that immediately with flashing the v8.bat file. In the V8.bet file I chose the Thor 1.7.3 recovery (as suggested by Dibbs and others) and WOOHOOO.....PASS on the tablet again.
Feeling ever more confident, I booted into recovery and flashed the CM10 Rom....SUCCESS!!!!!!!!!!!!!!!
If you are having trouble....don't give up. Thanks again for the help to Dibbs and OKAstro!!
I had Mint Jelly2.1 installed and everything was working fine.
it started when I had used the APK Hide It Pro. I was in the process of hiding videos and I noticed that my phone got rebooted and got stock in the Samsung boot up image with the Custom Lock image.
I tried nandroid restore, 2 images, but both also failed to restore / bootup.
I tried re-installing ROM and it was successful but during reboot, it will still get stock on the boot image.
Last step.
I used ODIN to restore the stock ROM and ODIN was able to install and reset. And my phone rebooted but still got stock on the Samsung Logo with CUstom Lock Screen.
What else can I do to fix this?
Thank you.
Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.
scott14719 said:
Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.
Click to expand...
Click to collapse
I had tried to restore/flash from recovery before ODIN and it all Failed.
Anyway, the last step ODIN restore and it was still stock at the Samsung Logo with Lock image.
I left the phone to charge the whole night and this morning when I turned it on, it was able to start properly with ODIN stock ROM.
I tried to go to recovery, and can only be done manually, and it was not the TWRP recovery but the stock one, with very small characters.
I tried to install Mint Jell2.1 right away but just reboots.
I realized that I might need to root it again and downloaded the Tool and re-loki'ed/rooted and installed TWRP.
Now, I am able to install Mint Jelly 2.1 and restoring all my apps.
I appreciate the comment.
Thank you.
scott14719 said:
Boot into recovery and do a factory reset. I assume you now have 3e stock recovery because of ODIN. This might or might not help. If you have any questions about recovery, please use the search function for information. If for some reason you still have a custom recovery (TWRP or CWM), try re-flashing an AT&T ROM and Kernel again. Everything you try is at your own risk. Good luck.
Click to expand...
Click to collapse
Yeah, every single time I ODIN back to stock, I get stuck at the splash screen also. And rebooting to 3E (factory) recovery and "restore factory defaults" works great.
CZ Eddie said:
Yeah, every single time I ODIN back to stock, I get stuck at the splash screen also. And rebooting to 3E (factory) recovery and "restore factory defaults" works great.
Click to expand...
Click to collapse
I can confirm this works happened to me yesterday.
leoj85 said:
I can confirm this works happened to me yesterday.
Click to expand...
Click to collapse
I am running out of options. I thought I am already out of this stuck on Samsung Logo with Custom Lock icon.
I had ODIN to stock I337UCUAMDL and reset, Ran Loki patch / installed TWRP, intermittently it will get stuck.
I flashed Shoshock 1.9, was able to reboot and setup basic settings.
I manually reboot to check if it was able to fix the problem, but no.
I am stuck again and don't know what is the next step for trouble shooting it.
any advise will be appreciated.
Thank you.
I got stuck to 1st boot image of Samsung with Lock Custom Icon.
I did format data/factory reset/clear cache/dalvik.. all of the wipe ootions.
I flashed a new ROM, successful, rebooted pass the logo and booted fine. I did not change any settings yet and I rebooted to check if it will get stuck again and sure after reboot, it got stuck again on the 1st image that shows up : Samsung Logo with the Lock Custom Icon.
qwer43 said:
I am running out of options. I thought I am already out of this stuck on Samsung Logo with Custom Lock icon.
I had ODIN to stock I337UCUAMDL and reset, Ran Loki patch / installed TWRP, intermittently it will get stuck.
I flashed Shoshock 1.9, was able to reboot and setup basic settings.
I manually reboot to check if it was able to fix the problem, but no.
I am stuck again and don't know what is the next step for trouble shooting it.
any advise will be appreciated.
Thank you.
Click to expand...
Click to collapse
IMPORTANTwhen using*twrp*recoverydo not choose "format data"(that option will ask you to type "yes")what if i did?rom will not boot past "padlock" boot screen orrom will not boot on second reboot*help!! I did, I did*1. sigh2. d/l odin3. d/l odin stock restore MDL4. let it do its thang5. after its complete it will be stuck at padlock6. should have "rtfm" huh?*7. pull battery8. hold home button, vol-up, power at same time9. when phone vibrates, release power, while still holdingvol-up, and home button10. you will now be in "stock recovery"11. wipe factory reset then wipe cache12. reboot*13. swear you will never "ignore instructions"
Hey all,
I was planning to upgrade the Defy + from CM10 to CM11. I saw on the thread that I needed the newest TWRP recovery. I downloaded the zip file and tried flashing it. I also rebooted.
Now, when I am in 2ndint boot and choose recovery, it's just a blank screen and it restarts into CM10.
Is there any way to get recovery back? Or will I have to simply restore the .SBF and start over again ?
Thanks