Related
Ok, heres the deal. I wanted to update my A500 to the new stuff, and possibly 4.1 when we have something stable. Right now im on Taboony 3.0.1. I flashed it recently because nothing else i would flash would work. Im trying to flash the ICS bootloader, but i need my CPUID, but i cant get that cause im on an ICS rom, and every time i try to flash one of the HC roms from http://forum.xda-developers.com/showthread.php?t=1113878 , it wont work.
So i cant get to my CPUID, and i cant flash anything newer. And this taboony rom, my wifi doesnt work. So im just lost. Ive been trying this for a couple weeks on and off. Can someone please help me sort it out. Im normally pretty good with this stuff, but everything with this is freaking confusing.
Thanks for any help.
Edit: I've tried the terminal method, with the dmeg>/mnt/sdcard/dmesg.txt the androidboot.serialno never shows up. Ill keep posting things that i try.
Oskiee said:
Ok, heres the deal. I wanted to update my A500 to the new stuff, and possibly 4.1 when we have something stable. Right now im on Taboony 3.0.1. I flashed it recently because nothing else i would flash would work. Im trying to flash the ICS bootloader, but i need my CPUID, but i cant get that cause im on an ICS rom, and every time i try to flash one of the HC roms from http://forum.xda-developers.com/showthread.php?t=1113878 , it wont work.
So i cant get to my CPUID, and i cant flash anything newer. And this taboony rom, my wifi doesnt work. So im just lost. Ive been trying this for a couple weeks on and off. Can someone please help me sort it out. Im normally pretty good with this stuff, but everything with this is freaking confusing.
Thanks for any help.
Edit: I've tried the terminal method, with the dmeg>/mnt/sdcard/dmesg.txt the androidboot.serialno never shows up. Ill keep posting things that i try.
Click to expand...
Click to collapse
Do a nandroid backup and look up your CPUID inside the backup folder
Look here #689 and above!
http://forum.xda-developers.com/showthread.php?t=1622425&page=69
m.
*** SOLVED ***
Hey all.
So I've had my A500 for about a year now and it's been on several different ROMs and kernels over that time.
Most recently, I was running Flexreaper R12 (I believe) and ICS was running very smoothly.
At some point a few months ago (after a Flexreaper update), I was experiencing the Sleep Of Death and flashed an AntiSOD kernel to stop it (which it did). All this time, for some reason or another, I never updated the bootloader past the Honeycomb bootloader - and that's where I'm stuck right now.
I've tried using AfterOTA in every possible way to get anything else loaded.
I've tried Blackthund3r's A500 APX Flash Utility with at least 7 different APX packages, but no matter what I try, I'm still stuck with Flexreaper and the HC bootloader.
FWIW, both AfterOTA and the A500 APX Flash Util experience a problem with my A500 when it reboots. Most of the time I can get the device to be recognized by my OS (Windows 7 x64), but sometimes it doesn't and fails on driver install, even though I've installed the Google drivers direct from the SDK as well as Acer's drivers (USB_Acer_1.00.0524_A30H_A31H_A32H_A500_A501).
I'm pretty sure this is a driver issue, but I'm unclear on how to fix it. I've uninstalled ALL drivers related to the A500, rebooted and reinstalled them, I've uninstalled them and then pointed the installer directly to the unzipped USB driver folder (from above), but it seems that at some point the device fails to be seen, only rarely - but it's this that I think is the main problem... or I'm missing something.
So, any advice for someone that's STUCK on the old 3.01 bootloader?
Psychlone
Psychlone said:
Hey all.
So I've had my A500 for about a year now and it's been on several different ROMs and kernels over that time.
Most recently, I was running Flexreaper R12 (I believe) and ICS was running very smoothly.
At some point a few months ago (after a Flexreaper update), I was experiencing the Sleep Of Death and flashed an AntiSOD kernel to stop it (which it did). All this time, for some reason or another, I never updated the bootloader past the Honeycomb bootloader - and that's where I'm stuck right now.
I've tried using AfterOTA in every possible way to get anything else loaded.
I've tried Blackthund3r's A500 APX Flash Utility with at least 7 different APX packages, but no matter what I try, I'm still stuck with Flexreaper and the HC bootloader.
FWIW, both AfterOTA and the A500 APX Flash Util experience a problem with my A500 when it reboots. Most of the time I can get the device to be recognized by my OS (Windows 7 x64), but sometimes it doesn't and fails on driver install, even though I've installed the Google drivers direct from the SDK as well as Acer's drivers (USB_Acer_1.00.0524_A30H_A31H_A32H_A500_A501).
I'm pretty sure this is a driver issue, but I'm unclear on how to fix it. I've uninstalled ALL drivers related to the A500, rebooted and reinstalled them, I've uninstalled them and then pointed the installer directly to the unzipped USB driver folder (from above), but it seems that at some point the device fails to be seen, only rarely - but it's this that I think is the main problem... or I'm missing something.
So, any advice for someone that's STUCK on the old 3.01 bootloader?
Psychlone
Click to expand...
Click to collapse
i was stuck to so i downgraded got the ics bootloader from the ota and then used afterOTA to get the unlocked version and it worked
gears177 said:
i was stuck to so i downgraded got the ics bootloader from the ota and then used afterOTA to get the unlocked version and it worked
Click to expand...
Click to collapse
So how did you downgrade? I've done everything I can think of - at least 6 times over...
That was the plan after I figured that downgrading back to stock and then going up from there was the only way, but I can't even go back to Honeycomb 3.2 or even 3.1.
Check this out - I even made sure to make a CWM backup of my original setup before I upgraded to 3.2 back almost a year ago...but I can't get it to restore. In fact, I made several different backups and can't get ANY of them to restore.
So, in short, what did you do to go backwards?
Psychlone
EDIT: when I try to get into APX or Bootloader, it always ends up in Thor 1.7 and my computer doesn't recognize the device with a device driver install fail for MTP USB Device, even though I've installed the Acer Recovery drivers and the Google SDK drivers too... wtH?
Psychlone said:
So how did you downgrade? I've done everything I can think of - at least 6 times over...
That was the plan after I figured that downgrading back to stock and then going up from there was the only way, but I can't even go back to Honeycomb 3.2 or even 3.1.
Check this out - I even made sure to make a CWM backup of my original setup before I upgraded to 3.2 back almost a year ago...but I can't get it to restore. In fact, I made several different backups and can't get ANY of them to restore.
So, in short, what did you do to go backwards?
Psychlone
EDIT: when I try to get into APX or Bootloader, it always ends up in Thor 1.7 and my computer doesn't recognize the device with a device driver install fail for MTP USB Device, even though I've installed the Acer Recovery drivers and the Google SDK drivers too... wtH?
Click to expand...
Click to collapse
if your on the honeycomb bootloader simply flash a honeycomb rom and kernel no need to use afterOTA or anything else if i remember correctly
Psychlone said:
So how did you downgrade? I've done everything I can think of - at least 6 times over...
That was the plan after I figured that downgrading back to stock and then going up from there was the only way, but I can't even go back to Honeycomb 3.2 or even 3.1.
Check this out - I even made sure to make a CWM backup of my original setup before I upgraded to 3.2 back almost a year ago...but I can't get it to restore. In fact, I made several different backups and can't get ANY of them to restore.
So, in short, what did you do to go backwards?
Psychlone
EDIT: when I try to get into APX or Bootloader, it always ends up in Thor 1.7 and my computer doesn't recognize the device with a device driver install fail for MTP USB Device, even though I've installed the Acer Recovery drivers and the Google SDK drivers too... wtH?
Click to expand...
Click to collapse
you got a couple of choices....
with the HC Bootloader and ics rom...
full wipe and flash an HC rom or
nandroid restore an HC backup or
flash an update.zip
as a last resort - a complete downgrade/rollback use timmydeansv4 EUU - just be sure to follow the instructions in jazzyjames post on how to roll back - iu dont wanna get it wrong and end up stuck in apx mode. If it doesnt work first time....STOP...disconnect yr data cable and reboot tab and pc, use a different USB port and try it again....
Some folks have had issues with win64 so if you are able to then try on a different pc
sometimes a restore wont work unless you restore it with the recovery you used to back up with in the first place which may have been cwm 1.3.4 in your case....maybe???
as far as the MTP driver goes...that can be a pain...i had the same trouble a few days ago on ICS...took ages to get installed....and i still dont know why it did....or why it wouldnt....very frustrating!!!
dibb_nz said:
you got a couple of choices....
with the HC Bootloader and ics rom...
full wipe and flash an HC rom or
nandroid restore an HC backup or
flash an update.zip
as a last resort - a complete downgrade/rollback use timmydeansv4 EUU - just be sure to follow the instructions in jazzyjames post on how to roll back - iu dont wanna get it wrong and end up stuck in apx mode. If it doesnt work first time....STOP...disconnect yr data cable and reboot tab and pc, use a different USB port and try it again....
Some folks have had issues with win64 so if you are able to then try on a different pc
sometimes a restore wont work unless you restore it with the recovery you used to back up with in the first place which may have been cwm 1.3.4 in your case....maybe???
as far as the MTP driver goes...that can be a pain...i had the same trouble a few days ago on ICS...took ages to get installed....and i still dont know why it did....or why it wouldnt....very frustrating!!!
Click to expand...
Click to collapse
he's not on the ics bootloader though so couldn't he just flash the 3.01 unstable and get the OTA? or go back to a stock rom in general?
gears177 said:
he's not on the ics bootloader though so couldn't he just flash the 3.01 unstable and get the OTA? or go back to a stock rom in general?
Click to expand...
Click to collapse
Yeh 2nd line of my post hc bootloader ics rom, and u correct use 3.01 buggy update,zip or stock update.zip I shoulda been clearer - thanks gears
Thanks guys, I really do appreciate the help, but I'm still having serious issues reverting back to HC.
I feel like an idiot, but I have to say that even though it seems so, I'm actually the owner of a computer repair business, have 28 years experience in PC/Mac repair, and have rooted and modded every android device I've owned (including some for friends as well) - all the way back to the very beginning with the D1. This, however, has thrown me for a loop. NOTHING with this A500 has been this complicated! Everything up to this point has literally been stupid-proof and I've actually been quite impressed at just how easy modding is on the A500...
Anyway...
Here's what's going on and what I've tried today:
I've tried unsuccessfully several times to get ANYTHING working on my laptop, but to no avail. Same story as last night, no progress whatsoever - however, I did note that with CWM 134, I was able to restore an earlier version of ICS 4.03 (Flexreaper R10 I believe) - but it wasn't easy... I ended up restoring the main image and then using parts and pieces (using Advanced Restore) from other saves to finally even get it to boot.
This clearly wasn't getting me anywhere, so I moved the entire operation to another computer - my main rig (also a Win7 x64 - in fact, I don't own a computer that's not Win7 x64)
Now I've got USB driver issues! I can't even install the standard USB drivers from Acer's website because the installer errors out saying that there's no version of Acer Iconia 3G Driver Install is installed. wtF? That's what I'm TRYING to do!
I did get a different USB driver installed - the USB Driver_Acer_1.06.1500_A30H_A500, but nothing wants to use it and Blackthund3r's APX Flash Util won't see it, AfterOTA won't use it, and it's basically useless anyway. AND I can't install the Acer_1.00.0524_A30H_A31H_A32H_A500_A501 drivers no matter if I've got any others installed or not.
In my device mangler, there is no device with an exclamation, and in fact, sees my Acer Iconia A500 under USB Serial Bus Controllers as "Acer Picasso USB Boot-Recovery Driver", only when it's plugged in. NO other instance shows up at all.
I'm actually at the point of trying to follow through with the EUU (dibb_nz's "last resort"), but vache's website is down and I can't download anything for it. In fact, there's nothing from that guide that has a valid link...
(http://forum.xda-developers.com/showthread.php?t=1632392)
So now where do I go? I understand IT really well, so you don't need to talk to me like a complete noob, but dang if I can't figure this one out!
If I can get valid links to all the downloads from the link above, I'd be more than happy to give it a go and see if that works, but I can't piece together all those things from random places. If either of you (or anyone else for that matter) has valid links for everything needed to follow the EUU guide, I'd be very grateful!
Any other advice would certainly be appreciated as well! I don't have to use either of these computers, but as mentioned, ALL of my computers have Windows 7 x64 on them. I suppose I could try one of my customer's computers for all this, but that's not morally right and probably something that I would prefer not to explore.
I feel as if I could get the USB drivers installed properly on EITHER machine, that I'd likely be in good shape. I think that's what my problem actually is on the laptop as well, even though they're all installed and shows as installed until I boot into any recovery - then I get the MTP Device Driver Fail. There's likely other Acer driver issues there though, since Blackthund3r's utils don't follow through for anything... everything just hangs. AfterOTA just hangs.
Advice please?
And thanks again for your knowledge!
Psychlone
Yeh I hear u m8, its taken me all nite and day to revert back to HC and then upgrade again....dam pesky Picasso drivers.....
why not do as gears suggested....boot to cwm do all the wipes and formatsand flash an HC rom, ezterrys has a rooted one...no drivers needed . or am I missing something?
D/l link for timmydeans euu in my cpuid thread
dibb_nz said:
Yeh I hear u m8, its taken me all nite and day to revert back to HC and then upgrade again....dam pesky Picasso drivers.....
why not do as gears suggested....boot to cwm do all the wipes and formatsand flash an HC rom, ezterrys has a rooted one...no drivers needed . or am I missing something?
D/l link for timmydeans euu in my cpuid thread
Click to expand...
Click to collapse
Well, I would but no matter what image I put on my SD or even internal SD, and no matter what recovery I use, there's always some type of fail - usually an MD5 fail, or just a fail without any error code at all (little android on his back with the red exclamation, but no code)
I'm clearly missing SOMETHING.
I'm about to try the EUU right now unless there's some other advice...
EDIT::
OK, so I'm really in bad shape here - now the EUU (PBJ20upgrade) comes back with the error:
Please download the newer image for the upgrade.
Current image version: Acer_AV041_A500_1,054.Acer_AV041_A500
New image version: Acer_A500_1.016.05_Com_GEN1
What now????
Psychlone said:
Well, I would but no matter what image I put on my SD or even internal SD, and no matter what recovery I use, there's always some type of fail - usually an MD5 fail, or just a fail without any error code at all (little android on his back with the red exclamation, but no code)
I'm clearly missing SOMETHING.
I'm about to try the EUU right now unless there's some other advice...
Click to expand...
Click to collapse
oh hell now i'm confused, lol.....the little android dude is the acer stock recovery....i thought you had thors 1.7...oh well, nvm
Hopefully the EUU will install the right drivers for you....just be sure NOT to connect your data cable until u see the "cannot detect yr iconia tab" screen and it will give u instructions on how to get into apx mode...oh just before that window the EUU will try and scan your system image it will take a good 5 mins b4 it pops up the window to go into apx don't panic just let it do its thing....good luck m8!!!!
Oh and this will completely wipe yr system and user data.....
dibb_nz said:
oh hell now i'm confused, lol.....the little android dude is the acer stock recovery....i thought you had thors 1.7...oh well, nvm
Hopefully the EUU will install the right drivers for you....just be sure NOT to connect your data cable until u see the "cannot detect yr iconia tab" screen and it will give u instructions on how to get into apx mode...oh just before that window the EUU will try and scan your system image it will take a good 5 mins b4 it pops up the window to go into apx don't panic just let it do its thing....good luck m8!!!!
Oh and this will completely wipe yr system and user data.....
Click to expand...
Click to collapse
Some of the WEIRDEST stuff I've ever experienced - EVER.
Oh, the little dead android is when I'm using the stock recovery - I get different errors in TWRP and all the CWM Thor's that I've tried...(134, 71 and 712)
OK, so now PBJ20upgrade won't let me advance because apparently my CPUID isn't correct... it's the ICS version that's 13 characters long instead of 15, and my dmesg doesn't even contain the word "androidboot" at all (it does, however, contain a crapload of errors.)
What's going on?
OK, I'm an idiot. I really need help. I'm just glad that I'm 40 and don't lose my cool anymore, otherwise, I'd be freaking out about now.
Psychlone said:
Some of the WEIRDEST stuff I've ever experienced - EVER.
Oh, the little dead android is when I'm using the stock recovery - I get different errors in TWRP and all the CWM Thor's that I've tried...(134, 71 and 712)
OK, so now PBJ20upgrade won't let me advance because apparently my CPUID isn't correct... it's the ICS version that's 13 characters long instead of 15, and my dmesg doesn't even contain the word "androidboot" at all (it does, however, contain a crapload of errors.)
What's going on?
OK, I'm an idiot. I really need help. I'm just glad that I'm 40 and don't lose my cool anymore, otherwise, I'd be freaking out about now.
Click to expand...
Click to collapse
cpuid = 15/16 chars go to one of yr cwm nandroid backups theres a uid.txt file in the folder all the other methods rely on adb??? if not try usbdeview thats in the thread too
THANK YOU!
dibb_nz said:
cpuid = 15/16 chars go to one of yr cwm nandroid backups theres a uid.txt file in the folder all the other methods rely on adb??? if not try usbdeview thats in the thread too
Click to expand...
Click to collapse
Thanks so much dibb_nz... I've currently got PBJ20upgrade doing *something* (says it's going to take 10 minutes)
Thing is, I didn't get to this point by any conventional means - I followed the destructions several times over but ended up having a newer image than PBJ wanted, or the wrong CPUID.
I finally got this far by unplugging the tablet while PBJ was running, waiting for it's long error and instructions on how to get into APX (which I've clearly done at least a couple dozen times by now) and for some reason when I plugged it in, it shot forward.
We'll see how this goes - I'll keep you posted. I do VERY MUCH appreciate the help. I just might still need it, but hopefully not.
EDIT: Just rebooted and saw a "PASS" on the screen, followed by the "android" loading screen.
EDIT 2: It rebooted all the way in, I signed in (did the entire sign in process) and I'm BACK TO STOCK!!!!
Ok, so thank you THANK YOU THANK YOU for all the help - just being a sounding board is all I need sometimes.
Last questions to get me set up for the future:
What recovery should I create a restore with?
Then after creating a restore, should I use Blackthund3r's utility to flash an unlocked ICS bootloader, and if so, which package should I use to be able to test JB but still be able to go backwards to an ICS (preferably CM9)?
Anything else that I might need to know? (keep in mind that I've read on the order of 30 different threads pertaining to this adventure since it began a couple days ago, but I really appreciate the advice you've given and clearly you know what's up with the A500 - AND, it's hard to disseminate info from all the random threads everywhere. Speaking of which, why is it that there can't be a single thread with most everything that an A500 owner would need? Seriously!!)
Thanks again,
Psychlone
With what I went thru use Civs nvflash and rom and I'd stick with third cement until your safely patched and on ics.do all the wipes and follow instructions to the letter ...I'll check back in shortly
EDIT wtf "third cement" dang auto correct ... should read thors recovery
Wow - what a journey.
I'm now running CM10 and loving it.
I really can't believe the process that I went through over the last couple days - I've rooted and modded two dozen devices in the last year alone, and have been playing with root and modded ROMs since the very beginning, and nothing comes close to what I just did.
I actually have to blame not having everything I need in one place. Mis en place means to have everything you need before you even start - and that used to work back in the day, and still does to an extent for some devices, but anymore, the download links and information are found scattered across many different websites and forums and threads - so much so that it's apparent that this is a product of Google's lack of grip on their hardware and OS.
I do, however, see that you and a couple others have done a KILLER job of getting most everything together in one place to make it easier for those that are searching. I really appreciated your threads that I've read - the way you've written your guides is very intuitive and easy to follow, even if they didn't initially work for me.
Anyway, thanks again. I'm not going backwards now, but if I ever need to for some reason, at least I'm a bit familiar with the "worst-case scenario"!!
Take care man,
Psychlone
excellent news glad it worked for ya
Psychlone said:
Thanks so much dibb_nz... I've currently got PBJ20upgrade doing *something* (says it's going to take 10 minutes)
Thing is, I didn't get to this point by any conventional means - I followed the destructions several times over but ended up having a newer image than PBJ wanted, or the wrong CPUID.
Click to expand...
Click to collapse
if its referring to newer image then the data cable is connected!
and it will spit this error at you....
I finally got this far by unplugging the tablet while PBJ was running, waiting for it's long error and instructions on how to get into APX (which I've clearly done at least a couple dozen times by now) and for some reason when I plugged it in, it shot forward.
Click to expand...
Click to collapse
yup now you're cookin
We'll see how this goes - I'll keep you posted. I do VERY MUCH appreciate the help. I just might still need it, but hopefully not.
EDIT: Just rebooted and saw a "PASS" on the screen, followed by the "android" loading screen.
EDIT 2: It rebooted all the way in, I signed in (did the entire sign in process) and I'm BACK TO STOCK!!!!
Click to expand...
Click to collapse
oh yeahhhhh!!!!
Ok, so thank you THANK YOU THANK YOU for all the help - just being a sounding board is all I need sometimes.
Click to expand...
Click to collapse
nps glad to be of assistance -
Last questions to get me set up for the future:
What recovery should I create a restore with?
Then after creating a restore, should I use Blackthund3r's utility to flash an unlocked ICS bootloader, and if so, which package should I use to be able to test JB but still be able to go backwards to an ICS (preferably CM9)?
Anything else that I might need to know? (keep in mind that I've read on the order of 30 different threads pertaining to this adventure since it began a couple days ago, but I really appreciate the advice you've given and clearly you know what's up with the A500 - AND, it's hard to disseminate info from all the random threads everywhere. Speaking of which, why is it that there can't be a single thread with most everything that an A500 owner would need? Seriously!!)
Click to expand...
Click to collapse
becoz then you'd have thousands of posts to look thru and no-one would bother reading it all....i try to keep my cpuid thread updated with things 'unbricking' but its too hard to put 'everything' in one post unfortunately
---------- Post added at 07:01 PM ---------- Previous post was at 06:48 PM ----------
Psychlone said:
Wow - what a journey.
I'm now running CM10 and loving it.
I really can't believe the process that I went through over the last couple days - I've rooted and modded two dozen devices in the last year alone, and have been playing with root and modded ROMs since the very beginning, and nothing comes close to what I just did.
I actually have to blame not having everything I need in one place. Mis en place means to have everything you need before you even start - and that used to work back in the day, and still does to an extent for some devices, but anymore, the download links and information are found scattered across many different websites and forums and threads - so much so that it's apparent that this is a product of Google's lack of grip on their hardware and OS.
I do, however, see that you and a couple others have done a KILLER job of getting most everything together in one place to make it easier for those that are searching. I really appreciated your threads that I've read - the way you've written your guides is very intuitive and easy to follow, even if they didn't initially work for me.
Anyway, thanks again. I'm not going backwards now, but if I ever need to for some reason, at least I'm a bit familiar with the "worst-case scenario"!!
Take care man,
Psychlone
Click to expand...
Click to collapse
hell, i havent got round to cm10 yet!! i'm trying to get there but i have too much fun helpin peeps get to grips with flashing BL's...have to really thank the devs they did an awesome job unlocking ICS so everyone can enjoy the custom ICS/JB/CM roms- they've extended the life of our little iconia an extra half year or so if not longer.....imagine if we had to put up with stock 'anything' lol, i'd have traded it in long ago!!
was about to suggest the apxflash bundles as there are alot more options as far as recovery's go but you're all sussed now so thats fantastic....
can u add "SOLVED" to the title in case someone else is looking for help. thanks m8:good:
dibb_nz said:
excellent news glad it worked for ya
hell, i havent got round to cm10 yet!! i'm trying to get there but i have too much fun helpin peeps get to grips with flashing BL's...have to really thank the devs they did an awesome job unlocking ICS so everyone can enjoy the custom ICS/JB/CM roms- they've extended the life of our little iconia an extra half year or so if not longer.....imagine if we had to put up with stock 'anything' lol, i'd have traded it in long ago!!
was about to suggest the apxflash bundles as there are alot more options as far as recovery's go but you're all sussed now so thats fantastic....
can u add "SOLVED" to the title in case someone else is looking for help. thanks m8:good:
Click to expand...
Click to collapse
CM10 is SLICK. Think CM9 on graphics steroids and you're close!
I appreciate your position more than most. I get a lot of enjoyment out of helping others as well - I've written overclocking guides for AMD systems that was written years ago, revised a couple/three years ago and is still used to this day, even though I've long since moved over to Intel's "dark side". I also participate pretty deeply in helping others at a couple PC hardware forums pretty much daily, even though that's my actual job - I own 2 computer repair businesses in my hometown, and with well over 20,000 computers to fix, I'm ALWAYS busy but still always find time to help others in need.
As for adding ***SOLVED*** to the title, I'd love to...but it won't let me. Perhaps it's because I don't have a high enough post count, or because it's reserved for Mods, but I can't do it.
Thanks for everything once again - it's quite refreshing to be on the receiving end!
Psychlone
hi. so I just bought my a500 used in the forums never rooted or unlocked already on the ice ota. I tried to unlock the bootloader' but everything just freezes while flashing. I am just stock rooted for now' but I really want to do some good dev work since my a2 has a locked boot loader. thanks/for any help and sorry if this had been covered. I may seem like it but I am not a complete noob.
Sent from my A500 using xda premium
lkrasner said:
hi. so I just bought my a500 used in the forums never rooted or unlocked already on the ice ota. I tried to unlock the bootloader' but everything just freezes while flashing. I am just stock rooted for now' but I really want to do some good dev work since my a2 has a locked boot loader. thanks/for any help and sorry if this had been covered. I may seem like it but I am not a complete noob.
Sent from my A500 using xda premium
Click to expand...
Click to collapse
Which OS are you on? ICS? HC?
Which "one step" app are you using to change out bootloaders?
MD
Moscow Desire said:
Which OS are you on? ICS? HC?
Which "one step" app are you using to change out bootloaders?
MD
Click to expand...
Click to collapse
I am on stock rooted is. it came stock ics and I just rooted it. I have tried pretty much all the tools available in windows, and done it manually with no flash in ubuntu. I can give u the. exact nvflash error later, but it falls I think on the step of actually flashing the new bootloader
Sent from my A500 using xda premium
lkrasner said:
I am on stock rooted is. it came stock ics and I just rooted it. I have tried pretty much all the tools available in windows, and done it manually with no flash in ubuntu. I can give u the. exact nvflash error later, but it falls I think on the step of actually flashing the new bootloader
Sent from my A500 using xda premium
Click to expand...
Click to collapse
Well, if you can't use the tools, (you don't need to give the NVFlash error, I already know what it is), then first try the following. (no matter how silly they sound.
1. Different PC
2. Different USB port. (mine has 4)
3. A good USB cable. Using one that comes with the printer or camera, or an el-cheapo won't work. Data pins aren't always the same. I use my HTC cable.
4. Make sure anti-virus and such is off.
If that doesn't work, only recourse is to roll back to 3.0, preferably by RUU. Problem is, you need an HC UID number to run the ruu. That should set your partitions in place. It's possible you might be able to run an HC 3.2 full update, grab the UID, then run the RUU.
After that, do the NVFlash to get the bootloader/CWM.
At least if it were me, that's the route I would take. Never did it before, but seems sound.
A Pity you bought it already with ICS.
MD
Moscow Desire said:
Well, if you can't use the tools, (you don't need to give the NVFlash error, I already know what it is), then first try the following. (no matter how silly they sound.
1. Different PC
2. Different USB port. (mine has 4)
3. A good USB cable. Using one that comes with the printer or camera, or an el-cheapo won't work. Data pins aren't always the same. I use my HTC cable.
4. Make sure anti-virus and such is off.
If that doesn't work, only recourse is to roll back to 3.0, preferably by RUU. Problem is, you need an HC UID number to run the ruu. That should set your partitions in place. It's possible you might be able to run an HC 3.2 full update, grab the UID, then run the RUU.
After that, do the NVFlash to get the bootloader/CWM.
At least if it were me, that's the route I would take. Never did it before, but seems sound.
A Pity you bought it already with ICS.
MD
Click to expand...
Click to collapse
Alright, thanks.
I feel like such a N00B right now, LOL. This is like when I first bought my Atrix 2.
I bought it used on the forums and figured I was good, I don't have to even update it and stuff since it is on ics, and the bootloader is unlocked, so I will have aokp on it by the end of the night I get it. I guess I was wrong....
Anyways, I tried other ports, and I was using the good motorola cable, but tried the one that came with i as well, so I guess I have to go back to HC. Why would that help? is the idea that I can then just unlock it some other way? If so, how might I go about getting the UID.
Also, is it worth trying to flash the honeycomb bootloader? any better chance there? cause with that I could just flash the new one with a zip or fastboot. also, Is there any way to just put the new one on by simply putting it on the partition using cat or something. I know I did that on my a2 with recovery, but it would brick with the bl.
Thanks for your help.
Thanks everyone, I got it, here's what I did. As usually I massively screwed things up in the process, but I got it:
So first, I tried to flash again in a few different ways, no success, no harm.
Then I downloaded a HC 3.1.2 or something full rom and put it on my sdcard and rebooted and applied it. BRICK. boot verification failed. So that clearly didn't work, and I realized that is because I had an HC rom with ICS bl.
Long story short I tried to get back with an ics update.zip with no luck, so I tried using a stock rom EUU, but it got to the part where it was looking for the tablet with adb debugging so I cancelled it, since obviously that was not going to do anything. Then I tried a few more zips, with no luck at all and somehow ended up in fastboot, which makes no sense since nothing flashed (or at least I though). From there I tried flashing cwm so I could recover, but it just kept saying "not supported in lock mode" so I gave up on that.
Now comes the accidental fix part. I tried the other exe in the EUU just to see what it did, and it appeared the same, so I just kept hitting continue, and when it got to the usb debugging part, I must have hit minimize instead of close. about 30 minutes and me being really pissed that I somehow hardbricked later I realized there were now 2 windows of the EUU thing open. One said that it could not find my device, and to manually put it in apx mode. WOW, so I was just too impatient before.
Long story shorty again, that worked and it was back on stock honeycomb, and I flashed the HC unlocked BL with no issues, but that did me no good, so I put aokp on my sdcard and flashed the ICS BL with no problem at all this time. I rebooted into recovery and flashed aokp, watched the boot animation that reminded me it was made by a 7 year old girl for a few while the dalvik cache built, and then I was good to go screw with the unusually large number of settings included and flash gapps.
So, yeah, basically I am an impatient moron, but hey! it worked.
Now I just have to find a good OC'd kernel that will work with aokp and I an good to go.
Just a heads up, I plan on building JB aokp and releasing it, so get ready for some serious unicorn swagger in a few months when I finally decide to do it.
I like that process. Flash everything till something works :laugh::laugh::laugh:
At least it works for me sometimes
Glad you got it going.
Listen, edit your post and link to the EUU files you were successful with. Might help some others.
MD
My colleague brought his stock A500 to me in a bricked condition last week.
I need a way to restore it. If I try to do a wipe it will say bootloader error if i try the recovery the droid falls down with the red sign with the exclamation mark.
This tablet has never been rooted, my colleague is not in to such things, it's lived its life with ordinary acer otas and the occational very young human (5 year old) trial wich it has survived.
He has installed all the OTAs he ever got on the tablet and this is in Sweden so it would probably be a 4.0.3 acer stock on it now.
I'm guessing it has died during a OTA or something. if i turn it on it will sit at the acer logo indefinitly.
I Bricked my A500 during a rooting atempt resulting in me needed to flash a stock rom to get it working again, but i cant find the thread i read to un-brick my A500.
Please Help!
try this http://forum.xda-developers.com/showthread.php?t=1839313
dibb_nz wrote:
try this http://forum.xda-developers.com/showthread.php?t=1839313
Click to expand...
Click to collapse
Well that thread seems to hold all i need, although i can't do a full wipe. when i do the flipswitch wipe procedure it halts with bootloader error
Im hoping to just be able to flash the stock rom from the link you gave me. Is it entirely necessary to do the wipe prior to flash? can i wipe it afterwards?
Hogbola said:
Well that thread seems to hold all i need, although i can't do a full wipe. when i do the flipswitch wipe procedure it halts with bootloader error
Im hoping to just be able to flash the stock rom from the link you gave me. Is it entirely necessary to do the wipe prior to flash? can i wipe it afterwards?
Click to expand...
Click to collapse
we're assuming the tab is full stock and currently on ICS...
and we're assuming he never tried to 'fix' his tab by flashing one thing or another...
the bootloader error worries me...what exactly does it say...
Yes the wipes are really important!! and not being able to use the button method to do so is concerning...
what happens with the Over The Air (OTA) updates is its just that...an update...it leaves all your settings/data intact. When you OTA from one build to another, like Gingerbread 3.0 to Honeycomb 3.1/2 and then to ICS 4.0 - you drag all your apps and settings with you and of course some things that work with 3.2 will not work under ICS....fjor instance, lots of folk had trouble with wifi disconnects, once they got to ICS - or they had apps force closing and other 'glitches'. This is why everyone tells you to do the wipes - as this fixes these things! In the case of stock ICS my gmail would f/c all the time no matter how many times I wiped/formatted....So for a smooth running tab - flash a custom rom!!!!!!
But getting back to you...
From that link i gave you...download the 3.1_Full.zip....its decrypted so just extract it and get the "update.zip" from it..
This "update.zip" is not an incremental "update" but the full stock rom....
once installed you'll be on GB you will need to root it with iconia root and then use acer recovery installer to flash cwm....(get these from the playstore)
do a backup or adb devices so you can get your CPUID....this is important...if anything goes wrong at any stage this is the only thing that will get you unbricked....see the cpuid link in my sig for more on this, please take the time to read it, even if it doesnt make much sense to you, read it anyway....
AFTER you have retrieved your cpuid, you can nvflash the patched bootloader/recovery pkg which means you are able to flash ICS/JB custom roms
they cannot be flashed via cwm like normal...you must use nvFlash to do it....
OR
take the OTA route to ICS...this takes a bit of time...I did it last week and it was a good 6-7 hours to go from GB to ICS
there are pre-rooted stock roms if you wanna stay stock see civato's stock rom thread for that here http://forum.xda-developers.com/showthread.php?t=1633907
official stock rom list by blackthund3r are here http://forum.xda-developers.com/showthread.php?t=1816560
civs guide to flashing the unlocked bootloader here http://forum.xda-developers.com/showthread.php?t=1622425
I am in a similar situation. Push the power button and it goes to a screen with white acer on black and stays there. Totally stock ICS, no root. I tried the update.zip thing and after automatically rebooting it says "Boot verified failed...". I don't have my cpuid, or have installed previously CWM or anything like that. I can get into APX mode. This guy here: http://forum.xda-developers.com/showthread.php?t=1751978 could only get into APX with no cpuid as well, but i don't understand all of the ubuntuu and command line stuff. I would love for someone to be able to walk a dummy like me through this mess. Thanks for any help.
if u got boot verified fail error you need nvFlash to repair that....as u know, with nvflash you need yr cpuid....wot about usbdeview? if you've never plugged yr tab into yr PC - then it won't work and the ONLY other way is Linux....
might be best to start yr own thread with a descriptive title, not just a help I'm bricked no uid, thread there are hundreds of those....the more effort u put into the title the more likely you will attract the attention of someone who can actually help...and remember you just don't need a bit of help but a blow by blow description of what to do and how....this will be very time consuming....at the very least get ubuntu installed, maybe just try a few things, anything to show you are capable of at least giving it a go yourself..
there are others who would like 2 know how to do this as well...having a specific thread of its own would be great
good luck
dibb
Sent from my GT-I9300 using Tapatalk 2
Actually, I have connected it to my PC before. Only for transferring media though. If I've done that, is the some way to retrieve my cpuid from the PC?
yup...usbdeview.zip see the bottom of the OP in the cpuid guide in my sig
Thanks alot for your help. I used usbdeview and got my cpuid. Now I should use nvflash? Know where a good step by step is for that one?
you could try the one in my sig??
dibb_nz said:
you could try the one in my sig??
Click to expand...
Click to collapse
Right. Sorry, I didn't notice that before. Thanks again for your direction.
"To install one of these roms you will need a custom recovery and to get that you must flash the patched bootloader FIRSt - once its patched you can install a recovery any old way you like"
Looking at that guide, would you please tell me what a custom recovery is and how to get one? Btw, I don't plan to do a custom ROM yet, I just want to get the damn thing working first. Was thinking of using the HC EUUs from the firmware files list. However there are two files, a .rar and a .exe listed. Which do i use?
NvigR8 said:
Right. Sorry, I didn't notice that before. Thanks again for your direction.
"To install one of these roms you will need a custom recovery and to get that you must flash the patched bootloader FIRSt - once its patched you can install a recovery any old way you like"
Looking at that guide, would you please tell me what a custom recovery is and how to get one? Btw, I don't plan to do a custom ROM yet, I just want to get the damn thing working first. Was thinking of using the HC EUUs from the firmware files list. However there are two files, a .rar and a .exe listed. Which do i use?
Click to expand...
Click to collapse
The .rar EUU is for an A500, the .exe is for the A501, which do you have?
I've got the a500. However, I decided to go with a custom ICS rom after all. I managed to put a new bootloader and custom recovery on using the a500apx flash tool. That part went fine. I flashed this rom:
Acer_AV041_A500_1.054.00_WW_GEN1-FULL-ROOT (original odex)
and that appeared to go well according to twrp, but after rebooting, it just shows the bootloader again and stops there. Not sure what i did wrong.
I renamed the rom update.zip. Should i not have done that?
well congrats for getting thru the flash process with no probs!!!
as far as renaming to update.zip that was not such a good move...hopefully things havent been screwed up too much
just go back into recovery and do a FULL wipe/format
then to flash use the option "install from zip file" not sure where that is in TWRP but it will have one
Okay. I will reflash the rom after completely wiping again. Thanks.
On a different note, why do roms require particular bootloaders?
Also different, how do you like your SGS3? If i can manage to fix this thing, perhaps I'll root my phone...
NvigR8 said:
Okay. I will reflash the rom after completely wiping again. Thanks.
On a different note, why do roms require particular bootloaders?
Click to expand...
Click to collapse
The stock ICS BL is encrypted - more or less - the only way to 'flash' a recovery or rom is to have the "key" that "unlocks" - it more or less - if you dont use the right key then the OS will not boot - the 'key' is based on your cpuid which is why everyone is forever telling you to save it somewhere safe....
Also different, how do you like your SGS3? If i can manage to fix this thing, perhaps I'll root my phone...
Click to expand...
Click to collapse
I enjoy the big screen, took awhile to get used to it in my hand, kept dropping it....then I ran it over with my 44tonne truck after 3 days and munted it!!!!
I have a case for it now, and its gr8 - I havent installed a rom on it yet...the forums over there are jampacked and I have no idea what I'm doing, lol - its the first android device I've had that I've left stock for so long...but it does what I want...the camera is awesome -burst mode is the bomb - BUT do I think it was worth the money???? Still on the fence about that one.....
Ouch. Sorry to read about running over your phone. That would kill me. I really like my SGS3. I think I'll look into rooting it just to be able to back it up and get rid of the bloatware. I did that on my Captivate and prior to today, thats all I've ever done modding wise to an android device.
So, I managed to get my tab up and running again. Yay! I reflashed the rom w/out changing the name and worked like a charm. Now If only I knew why this happened in the first place... Thanks for all your help.
NvigR8 said:
Ouch. Sorry to read about running over your phone. That would kill me. I really like my SGS3. I think I'll look into rooting it just to be able to back it up and get rid of the bloatware. I did that on my Captivate and prior to today, thats all I've ever done modding wise to an android device.
So, I managed to get my tab up and running again. Yay! I reflashed the rom w/out changing the name and worked like a charm. Now If only I knew why this happened in the first place... Thanks for all your help.
Click to expand...
Click to collapse
yeh sometimes happens with the tab for some reason - thank your lucky stars it didn't get stuck in apx mode...if that happens its normally a hardware fault so theres not alot u can do...I'm just pleased you got sorted without too much drama and it was as easy as reflashing the zip....so now you have the v8 BL - you're gold!!!
dibb_nz said:
we're assuming the tab is full stock and currently on ICS...
and we're assuming he never tried to 'fix' his tab by flashing one thing or another...
the bootloader error worries me...what exactly does it say...
Yes the wipes are really important!! and not being able to use the button method to do so is concerning...
what happens with the Over The Air (OTA) updates is its just that...an update...it leaves all your settings/data intact. When you OTA from one build to another, like Gingerbread 3.0 to Honeycomb 3.1/2 and then to ICS 4.0 - you drag all your apps and settings with you and of course some things that work with 3.2 will not work under ICS....fjor instance, lots of folk had trouble with wifi disconnects, once they got to ICS - or they had apps force closing and other 'glitches'. This is why everyone tells you to do the wipes - as this fixes these things! In the case of stock ICS my gmail would f/c all the time no matter how many times I wiped/formatted....So for a smooth running tab - flash a custom rom!!!!!!
But getting back to you...
From that link i gave you...download the 3.1_Full.zip....its decrypted so just extract it and get the "update.zip" from it..
This "update.zip" is not an incremental "update" but the full stock rom....
once installed you'll be on GB you will need to root it with iconia root and then use acer recovery installer to flash cwm....(get these from the playstore)
do a backup or adb devices so you can get your CPUID....this is important...if anything goes wrong at any stage this is the only thing that will get you unbricked....see the cpuid link in my sig for more on this, please take the time to read it, even if it doesnt make much sense to you, read it anyway....
AFTER you have retrieved your cpuid, you can nvflash the patched bootloader/recovery pkg which means you are able to flash ICS/JB custom roms
they cannot be flashed via cwm like normal...you must use nvFlash to do it....
OR
take the OTA route to ICS...this takes a bit of time...I did it last week and it was a good 6-7 hours to go from GB to ICS
there are pre-rooted stock roms if you wanna stay stock see civato's stock rom thread for that here http://forum.xda-developers.com/showthread.php?t=1633907
official stock rom list by blackthund3r are here http://forum.xda-developers.com/showthread.php?t=1816560
civs guide to flashing the unlocked bootloader here http://forum.xda-developers.com/showthread.php?t=1622425
Click to expand...
Click to collapse
When i do the wipe it says
Code:
Erasing userdata...
Code:
Unrecoverable bootloader error (0x19000008)
Unrecoverable bootloader error (0x19000008)
Hogbola said:
When i do the wipe it says
Code:
Erasing userdata...
Code:
Click to expand...
Click to collapse
I googled your error - the consensus from what I read is a corrupt OS due to running OTA updates...
Some had luck with rebooting. Others had to send it to Acer.
Did you run the update.zip? so what happens when you run the update.zip
Are you able to get into "apx mode"? If you can, hook up to your PC and see if your tab is recognised as an "apx device" - check "Hardware, Printers in win7"
Thats all I can suggest atm - if your tab does get into apx mode OK then you can find your cpuid by running Linux -
Maybe ask the guy if he's ever had the tab hooked up to his PC like to transfer files and stuff - get him to download "USBdeview" to his PC -
this will show every single device thats ever been connected to the PC and it will show the "cpuid"...
Even if we do get the uid theres no guarantee it will fix the bootloader error - but we may as well explore all the options we can....
dibb_nz said:
USBDeview will only work when you have previously plugged your tab into the PC WHILE you were running HC Rom and BL
1. If you haven't plugged your tab into this pc before, do so now, before you run the program. HC ROM/BL ONLY
1a. Run the exe and you will be presented with a window of all the USB devices you have ever plugged into your computer.
2. Click on "VendorID" column along the top to sort them
3. Look for the number "0502" under Vendor ID AND "3325" Product ID
4. In the serial number column will be a 15-digit number this is your device ID.
5. Write the number down and put a 0 in front of it and now you have your CPU ID!!!
Click to expand...
Click to collapse
So, my neighbor bought an Acer A500 a few months back. He ended up not liking it so I bought it off of him. My tablet and I got really close and I fell in love. I started neglecting my girlfriend and all that. We had a beautiful relationship; my tablet and me. But, a couple days ago I was playing N.O.V.A 3 and it froze. I thought nothing of it and just powered it down. To my dismay, it froze at the Acer screen. I restarted it again and got the same thing. My life was over. My heart felt like it was ripped from my chest... I shed a manly tear.
I've tried vol- and power, vol+ and power, the reset button, D/Ling several different update.zip files and copying them to my SD. I've spent the last couple days reading and trying everything. All I get is the Droid guy with the blue thing swirling in his chest and then him laying on the ground with a red triangle and an exclamation point.
I'm told it's most likely not a hardware issue as things things are almost bullet-proof. But, I am pretty good at breaking things
Am I screwed or does someone have a miracle they can share. My gaming life depends on it.
-Dennis.
DennisPimps said:
So, my neighbor bought an Acer A500 a few months back. He ended up not liking it so I bought it off of him. My tablet and I got really close and I fell in love. I started neglecting my girlfriend and all that. We had a beautiful relationship; my tablet and me. But, a couple days ago I was playing N.O.V.A 3 and it froze. I thought nothing of it and just powered it down. To my dismay, it froze at the Acer screen. I restarted it again and got the same thing. My life was over. My heart felt like it was ripped from my chest... I shed a manly tear.
I've tried vol- and power, vol+ and power, the reset button, D/Ling several different update.zip files and copying them to my SD. I've spent the last couple days reading and trying everything. All I get is the Droid guy with the blue thing swirling in his chest and then him laying on the ground with a red triangle and an exclamation point.
I'm told it's most likely not a hardware issue as things things are almost bullet-proof. But, I am pretty good at breaking things
Am I screwed or does someone have a miracle they can share. My gaming life depends on it.
-Dennis.
Click to expand...
Click to collapse
Do you know what you were running on this thing? Was it stock Honeycomb, scock ICS, or was it running a custom ROM? (If so which one?)
Was it ever hooked up to your PC? (This would help with retrieving CPUID, if it was.) Do you know your CPUID? (Or SBK?)
You should at the least know the answers to these questions before you attempt any type of repair, as it is almost certainly salvageable, but you will almost certainly need your CPUID.
Danny2 said:
Do you know what you were running on this thing? Was it stock Honeycomb, scock ICS, or was it running a custom ROM? (If so which one?)
Was it ever hooked up to your PC? (This would help with retrieving CPUID, if it was.) Do you know your CPUID? (Or SBK?)
You should at the least know the answers to these questions before you attempt any type of repair, as it is almost certainly salvageable, but you will almost certainly need your CPUID.
Click to expand...
Click to collapse
I was running 4.0.1 ICS. I do have my cpuid and SBK. I tried flashing a new rom using blackthund3rs flash tool but it got to about 25% and stopped. I keep losing sync with my PCs, though.
DennisPimps said:
I was running 4.0.1 ICS. I do have my cpuid and SBK. I tried flashing a new rom using blackthund3rs flash tool but it got to about 25% and stopped. I keep losing sync with my PCs, though.
Click to expand...
Click to collapse
So, do you want to go back to stock, or to a custom ROM? If you wanna go stock, the easiest way would be load a 3.01 EUU, & upgrade on the play market to 4.03. That will prove it isn't a hardware issue. Alternatively, you could root, load a recovery, a bootloader, & flash a new ROM.
Danny2 said:
So, do you want to go back to stock, or to a custom ROM? If you wanna go stock, the easiest way would be load a 3.01 EUU, & upgrade on the play market to 4.03. That will prove it isn't a hardware issue. Alternatively, you could root, load a recovery, a bootloader, & flash a new ROM.
Click to expand...
Click to collapse
To be honest, I really don't care as long as I can getting it working again. But I would rather root it.
I think I can get it to work but neither one of my computers will recognize it. It shows up in APX and says something about recovery driver mode when I plug it into the laptop with Vista automatically downloads a driver and installs it again. I've tried turning off automatic driver install but that doesn't work for some reason. The one with XP Pro just shows up APX device but the APX Flash Tool by blackthund3r says it can't find it. I've downloaded the Acer Iconia 500 drivers and installed them but that doesn't work either. I'm at a loss.
Any tips would be great. I think I have a better chance using my laptop with XP, though. I also need to let you know that I truly do appreciate you trying to help. If you're ever in Columbus Ohio, let me know and I'll buy you a beer. lol
DennisPimps said:
To be honest, I really don't care as long as I can getting it working again. But I would rather root it.
I think I can get it to work but neither one of my computers will recognize it. It shows up in APX and says something about recovery driver mode when I plug it into the laptop with Vista automatically downloads a driver and installs it again. I've tried turning off automatic driver install but that doesn't work for some reason. The one with XP Pro just shows up APX device but the APX Flash Tool by blackthund3r says it can't find it. I've downloaded the Acer Iconia 500 drivers and installed them but that doesn't work either. I'm at a loss.
Any tips would be great. I think I have a better chance using my laptop with XP, though. I also need to let you know that I truly do appreciate you trying to help. If you're ever in Columbus Ohio, let me know and I'll buy you a beer. lol
Click to expand...
Click to collapse
Sorry,I thought I responded to this yesterday, but just now noticed I didn't.
Fire it up in APX mode, and install the 3.01 EUU from the development section, (Stock ROM listing) then simply follow the upgrade path to 4.03, then root. If you drivers are installed correctly, everything will work fine, if not, nothing will happen. If it does start to load the stock ROM, then fails with a write error after it attempts to write the bootsector, you may need to run Badsector, or babsector, depending where you look. Search the recent posts on this, you will find lots of stuff.
Danny2 said:
Sorry,I thought I responded to this yesterday, but just now noticed I didn't.
Fire it up in APX mode, and install the 3.01 EUU from the development section, (Stock ROM listing) then simply follow the upgrade path to 4.03, then root. If you drivers are installed correctly, everything will work fine, if not, nothing will happen. If it does start to load the stock ROM, then fails with a write error after it attempts to write the bootsector, you may need to run Badsector, or babsector, depending where you look. Search the recent posts on this, you will find lots of stuff.
Click to expand...
Click to collapse
How would I go about installing the EUU? I have nvflash and blackthund3r's flashing tools. But I can't seem to get my PC and tablet to connect. When I plug it into my PC without being in APX mode, it just says MTP Device. When I plug it in while in APX mode it does say something about Picasso Recovery Driver.
If you could explain things to me like I'm aN idiot, I'd really appreciate it.
Thanks,
Dennis
DennisPimps said:
How would I go about installing the EUU? I have nvflash and blackthund3r's flashing tools. But I can't seem to get my PC and tablet to connect. When I plug it into my PC without being in APX mode, it just says MTP Device. When I plug it in while in APX mode it does say something about Picasso Recovery Driver.
If you could explain things to me like I'm aN idiot, I'd really appreciate it.
Thanks,
Dennis
Click to expand...
Click to collapse
Sorry for late response, I watched for reply from yourself, but you didn't answer for 10 days, I lost track. Still need help?
Danny2 said:
Sorry for late response, I watched for reply from yourself, but you didn't answer for 10 days, I lost track. Still need help?
Click to expand...
Click to collapse
Yea, it's still bricked. I did finally get the flash tool to recognize it but it kept hanging up. I also tried Timmy Dean's EUU tool and that hangs up too. I did a little more research and found that I may have a faulty emmc. I ran babsector and got 'fatal error code 9 cannot format partition BCT.' I found a thread here that discusses how to write around the bad sectors using Linux. I'm going to give that a go... I've always wanted to learn Linux. Hey, I can't screw it up anymore than it already is, right? Again, thanks for your time and effort in trying to help.
Cheers,
Dennis
Hey, before you try that, try different USB cables and ports (if u haven't already)
I had a similar problem with my phone not maintaining stable USB link to PC... after 4 days I tried a diff USB cable and boom, snap, working.
Just a thought.....
Sent from my A500 using xda app-developers app
ericpeacock79 said:
Hey, before you try that, try different USB cables and ports (if u haven't already)
I had a similar problem with my phone not maintaining stable USB link to PC... after 4 days I tried a diff USB cable and boom, snap, working.
Just a thought.....
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
I'll give that a go, m8.
Thanks!
-Dennis
DennisPimps said:
I'll give that a go, m8.
Thanks!
-Dennis
Click to expand...
Click to collapse
Just wondering if you ever figured out the errors you were getting during flashing? Currently having the same issues when using babsector.