Database Users

Voodoo install from OCLF Ryan bricked the Vibrant

I had the update with OCLF installed and it worked fine until I decided "accidentally" (very very regretful now) to install Voodoo from the OCLF app. Then the phone went into a soft reset and got stuck at the Vibrant screen.
Since then I've tried to select "install packages" or "reboot system" options in the recovery mode, but it showed only a partial progress bar at the bottom, then it got stuck at the Vibrant screen.
I gave Odin a try but the app does not see any com port after use ADB reboot or recovery commands.
Btw I did NOT select USB debugging mode before installing voodoo. I did install the USB driver for the Vibrant but am not sure it even works because the Odin app did not see any com port.
Any help is appreciated! I don't want to loose data and files in the internal storage. This is kinda urgent because I need to use phone.

i900 said:
I had the update with OCLF installed and it worked fine until I decided "accidentally" (very very regretful now) to install Voodoo from the OCLF app. Then the phone went into a soft reset and got stuck at the Vibrant screen.
Since then I've tried to select "install packages" or "reboot system" options in the recovery mode, but it showed only a partial progress bar at the bottom, then it got stuck at the Vibrant screen.
I gave Odin a try but the app does not see any com port after use ADB reboot or recovery commands.
Btw I did NOT select USB debugging mode before installing voodoo. I did install the USB driver for the Vibrant but am not sure it even works because the Odin app did not see any com port.
Any help is appreciated! I don't want to loose data and files in the internal storage. This is kinda urgent because I need to use phone.
Click to expand...
Click to collapse
The same thing happened to me. I even posted it yesterday to warn people to be careful with RYANZA Voodoo and I got flamed and insulted. Basically you fried your kernel. I tried different things and what worked for me was ODIN the JI6 back. Go to Vibrant Directory Bible under Samsung Vibrant--Android Development and find that thread. Go to the ODIN section and download the JI6 package. You will need to get into 'Download" mode on your Vibrant for ODIN to work. You need to have the phone plugged into computer via USB, hold down both volume buttons and the power button at the same time. When the screen becomes black, release only the power button and download mode will pop up. Then bring up ODIN and make sure the yellow com message pops up. With ODIN it will work right away (like 2 minutes). If you see it hanging then you need to try it again. When you get your phone back up you need to disable voodoo. Good luck. Know that the Vibrant is almost impossible to kill, you will be able to bring the phone back to life.
here's the link: http://forum.xda-developers.com/showthread.php?t=771111
instructions here: http://forum.cyanogenmod.com/topic/...r-vibrant-and-return-to-stock-phone-pc-error/

I tried flashing it using odin but the phone would start, show the tmobile thingy and just turns off. Is there any way around this?
Sent from my HTC Glacier using XDA App

Thank you for your prompt reply
quest4fire said:
The same thing happened to me. I even posted it yesterday to warn people to be careful with RYANZA Voodoo and I got flamed and insulted. Basically you fried your kernel. I tried different things and what worked for me was ODIN the JI6 back. Go to Vibrant Directory Bible under Samsung Vibrant--Android Development and find that thread. Go to the ODIN section and download the JI6 package. You will need to get into 'Download" mode on your Vibrant for ODIN to work. You need to have the phone plugged into computer via USB, hold down both volume buttons and the power button at the same time. When the screen becomes black, release only the power button and download mode will pop up. Then bring up ODIN and make sure the yellow com message pops up. With ODIN it will work right away (like 2 minutes). If you see it hanging then you need to try it again. When you get your phone back up you need to disable voodoo. Good luck. Know that the Vibrant is almost impossible to kill, you will be able to bring the phone back to life.
here's the link: http://forum.xda-developers.com/showthread.php?t=771111
instructions here: http://forum.cyanogenmod.com/topic/...r-vibrant-and-return-to-stock-phone-pc-error/
Click to expand...
Click to collapse
I'll give it a try later. Is there a good link to download the USB driver? I did but am not sure it will work with Odin. I also forgot to release the pwr button only when the Vibrant screen came on. You said release it at the black screen.

Theres voodoo on the oclf app? Where do you download it? When I downloaded it from the market it wasn't there. Do I need to install a supported kernel before it shows up?

Another thing is the phone is not in USB debugging mode before. Is this needed for Odin to work?

It is in OCLF app
krackers said:
Theres voodoo on the oclf app? Where do you download it? When I downloaded it from the market it wasn't there. Do I need to install a supported kernel before it shows up?
Click to expand...
Click to collapse
I don't remember exactly how it looks but the app has like 3 tabs: 2nd is available, 3rd unavailable or vice versa, 1st is probably the voodoo one. BE CAREFUL, read the kernel instruction first! I am sure they are not compatible. It should be disabled one or the other so users wouldn't get hacked.

ok the 3 button procedure got the phone into Recovery mode like this screen with yellow text:
--------------------------------------
Android system recovery <2e>
reboot system now
reinstall packages
--Appling Multi-CSC
Installing Multi-CSC
------------------------------------
Selecting either "reboot system now" or "reinstall packages" gives this screen:
----------------------------------------
Installing from sd card completed
rebooting..
Phone reset done
-----------------------------------------
The phone now got stuck at the Vibrant screen!
How to get into the download mode?

Holding vols up down with battery in and then plug in the USB cable, the Downloading screen came up with the digging icon and a message "do not turn off target" but it just got stuck there. I typed in the adb reboot download under the folder containing the adb files but it said "error no device found". I installed both drivers, one from Samsung site and one x86 from Softpedia site. Is it time to get a new one?

Try this.
Click HERE FOR ODIN 1.30
Samsung USB Drivers MS Windows 64bit HERE 32bit drivers HERE pick the drivers that work with your pc I have windows 7 so I use 64bit.
Step 1. Download the 512 PIT file HERE this file needs to be un rared with Winrar its a free program its HERE.
Step 2. Download the T959UVJFD.tar HERE
Step 3. Get your phone in download mode try just holding the volume up and down at the same time then plug the usb in, you might have to pull the battery and then put it back in the phone then hold volume up and down at the same time then plug the usb in it should go into download mode.
Step 4. Open Odin 1.30.
Step 5. Load the 512 PIT file you extracted with winrar into Odin 1.30 PIT section of Odin
Step 6. Load the T959UVJFD.tar you downloaded into Odin 1.30 into the PDA section of Odin.
Step 7. Click the Star button in Odin.
Step 8. Let it do its thing.
Step 9. Thank me
Step 10. Hope this helped it really doesn't get much easier then what Ive given you in this list.

Will the pit file WIPE the data (photo..)?
AustinKnight45 said:
Try this.
Click HERE FOR ODIN 1.30
Samsung USB Drivers MS Windows 64bit HERE 32bit drivers HERE pick the drivers that work with your pc I have windows 7 so I use 64bit.
Step 1. Download the 512 PIT file HERE this file needs to be un rared with Winrar its a free program its HERE.
Step 2. Download the T959UVJFD.tar HERE
Step 3. Get your phone in download mode try just holding the volume up and down at the same time then plug the usb in, you might have to pull the battery and then put it back in the phone then hold volume up and down at the same time then plug the usb in it should go into download mode.
Step 4. Open Odin 1.30.
Step 5. Load the 512 PIT file you extracted with winrar into Odin 1.30 PIT section of Odin
Step 6. Load the T959UVJFD.tar you downloaded into Odin 1.30 into the PDA section of Odin.
Step 7. Click the Star button in Odin.
Step 8. Let it do its thing.
Step 9. Thank me
Step 10. Hope this helped it really doesn't get much easier then what Ive given you in this list.
Click to expand...
Click to collapse
Somewhere in the forum said that selecting the pit file will wipe all data. Is that true because I so want to keep EVERYTHING intact! Just got back from a short vacation in Waikiki
I got the PC to see the Vibrant now with Odin but I downloaded the newer tar file T959UVJI6 (2.1 updated ver) but can not see it from selecting PDA button, it can only see the old T959UVD (stock 2.1). I am at the no point of return now so within 15mins if there is no answer then I must get going.
Thanks again!

Never mind guys! my bad did not unrar the tar file..going to download it now..wish me best of luck!

ok downloading now... it is a nerve wrecking experience comparing to WM6.1 custom rom flash which was very smooth going. I still miss the original i900 Omnia. I am going to be late for the church but God please forgive me! Oh it passed the downloading and got the S logo..

it booted up but stuck at black screen with all soft keys lighted up, tried the install packages in recovery mode again..

I guess I need to download the pit file? Will this wipe out all data?

I don't have voodoo... where did you get your oclf app from? Is it not showing because I have stock JI6 kernel?

i900 said:
I guess I need to download the pit file? Will this wipe out all data?
Click to expand...
Click to collapse
Did you follow my to-do list to the T?
this might help
you need to flash this PDA file with odin EUGENE373_SamsungS_Froyo_PDA along with the PIT 512 you should still have from the unbrick instruction odin forum then after you flash those files you need to let it do its thing it will prob take you to recovery just long press the power button and when it turns off put the usb back in the phone to get it into Download mode(just get back into download mode any way you know how) and then follow those instructions you did earlier with the unbrick instructions forum just flash the Eugene373 SamsungS Froyo PDA file first then after you flash it get right back into download mode and flash stock vibrant rom through odin.

Odin in eugenes froyo that doesnt brick.Make sure you use the 513 pit file that comes with it. When its done, pull the battery and odin the jfd. Use the 512 pit file with jfd. Check the repartition box for this one. You will be back to stock and all the lag fixes will be gone. This process works to save your vibrant from ALMOST everything
^^^oops, didnt make it to your post...just tryin to help

OCLF from the market by Ryan
krackers said:
I don't have voodoo... where did you get your oclf app from? Is it not showing because I have stock JI6 kernel?
Click to expand...
Click to collapse
But use it with extreme CAUTION at your own risk. Don't brick it like mine

Again guys thanks for your time and help but just one more time, I am still a bit confused, can you list exactly what files to download in order to get the phone back alive without loosing any data and files?
Download 512 or 513 pit first? Do it together with the tar file (check both boxes in Odin)? I understand 512 pit go with JFD (stock 2.1 rom before the update). How about the latter one? It goes with JI6? Now I got only the JI6 in the phone without the pit file. Should I download 512 with JFD first then do the latter one with JI6, and all data still remain intact?

[Q] Is my Tab done for? Is it fixable? Help!

I'm having the following problems with my TAB and would like to know it's fixable. I treid almost everything to fix it without success. I'm hoping someone can help me. Anyone have these problems before?
1. Doesn't charge normally. It would charge but charge really slow like it's connected via us. It shows an x next to the lightening icon when I charge it using the original charger and cable.
2. I cannot go into recovery mode. I get the black screen with the white line. There's also no boot animation when it boots up.
3. The camera doesn't work. I get a fail message when I open it.
4. My computer doesn't detect it in download mode, kies or mass storage. My computer detect my samsung galaxy s i9000 without any problems so I know it's not the computer. I cannot change the firmware because my computer doesnt detect it.
5. I dont have the receipt to do a warranty repair. What are my other option?
AT&T SGH-i987
Firmware 2.2
Baseband P1000XXJHA
Kernel 2.6.32.9 [email protected] #19
Build XXJMA
Any help is much appreciated! Thanks!

Did you register your Tab with Samsung?
If so, they have a record of your purchase and will be able to provide support.
If not, then try this which I got from their online chat: Hope it helps.
"Kyle: To recover the device via the hardware keys, do the following:
Kyle: 1. Power off the handset.
Kyle: 2. Hold the Vol Down Key + Vol Up Key + Power Key for 15 seconds then release.
Kyle: 3.When the recovery screen comes up, use the volume up key and volume down key to navigate through the selections and the power key to select item.
Kyle: 4. Select Delete all user data to recover the device. To confirm, scroll down and select Yes – delete all user data. The phone reboots and again displays the recovery screen.
Kyle: 5. Select Reboot system to restart the handset again. "

Thanks but I cannot get to that recovery screen like I said above. All I get is a black screen with a white line when I try to go into recovery mode. I also purchase this used with no receipt.

U just need to flash a working rom. Try roto jm... in the dev forum
Your tab was modified. I wont blame Samsung if they wont fix it for u
Sent from my SGH-I987 using XDA App

How do i flash to a different rom if a computer wont detect it?

Do you have the latest kies installed? Is USB Debug on? If it still doesn't detect, have you tried android-sdk or heimdall. Each comes with usb driver. I find it hard to believe your PC doesn't detect the tab. I never heard such thing before unless you're the real first victim then...yeah, try to call Samsung and pay a fee.

Yes, I tried to use android-sdk and heimdall but they don't detect my TAB for me to do anything. I also installed the newest KIES software. I also don't understand why it doesn't detect it in download mode. This is the first time I encounter this problem. I flashed my Galaxy S I9000 phones many times without a problem. Is the combination of the firmware and kernal I have that is causing my computer not to detect the TAB?
Is there a way to root my TAB via an APK? I tried Z4Root but it's not working. It tries to acquirer shell and closes after a few vibrate. yes, debugging mode is on.

starbuck123 said:
Yes, I tried to use android-sdk and heimdall but they don't detect my TAB for me to do anything. I also installed the newest KIES software. I also don't understand why it doesn't detect it in download mode. This is the first time I encounter this problem. I flashed my Galaxy S I9000 phones many times without a problem. Is the combination of the firmware and kernal I have that is causing my computer not to detect the TAB?
Is there a way to root my TAB via an APK? I tried Z4Root but it's not working. It tries to acquirer shell and closes after a few vibrate. yes, debugging mode is on.
Click to expand...
Click to collapse
You've followed Heimdall's README and installed the included driver? Make sure you follow the instructions exactly.
If you have done that and your device still isn't recognised consider trying a another cable, USB port or entirely different PC.

Benjamin Dobell said:
You've followed Heimdall's README and installed the included driver? Make sure you follow the instructions exactly.
If you have done that and your device still isn't recognised consider trying a another cable, USB port or entirely different PC.
Click to expand...
Click to collapse
Thanks for your advice but I already tried above. I didn't have any problems/trouble connecting my Verizon Tab and Galaxy S phone to the computers to change the roms. There is most likely something wrong with the Tab. I gave up and contacted Samsung yesterday. I sent the Tab to them yesterday and hopefully they won't charge me to fix it.

Really Bricked my new Galaxy Tab 2 7 inch. I have tried everything :(

Hello, I so hope someone can help. I just updated my galaxy tab 2 7 p113 to Android 4.0.4 UEBLH2. That was done automatically from samsung. I wanted to then install the newest update to 4.1.1 jellybean. So I downloaded it from this link. http://www.trickytweaks.com/update-...ecli4-4-1-1-jelly-bean-ota-test-firmware.html. I put the official Android 4.1.1 UEBLH2 Firmware on my sdcard then held down my power and up volume and installed it. HOWEVER, it never finished installing. Went all the way to the end. Now I HAVE NO USB CONNECTION and NO BOOT UP. Just black Since I dont have usb connection I cant us oden. CAN ANYBODY PLEASE HELP? I still can put files on my micro disk card and then put sd disk in my tab and use the power button up arrow to install something but I tried installing clockwork mod but that did not work. Iam out of ideas. P.S. My tab IS NOT ROOTED. I tried updating back to and original rom 4.04 I download but that did work. Thank you.

I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2

Mohamedselim said:
I think you need to enter the download mode volume down+power or recovery mode volume up+power to be able to restore the tab
Try multiple times close the tab even with long pressing power then try the button combinations (press both for multiple seconds) and release to see if you could enter any mode
If you reached download mode try flashing stock firmware for your tab specific model 3113 or 3110 or 3100 via odin (install kies and reboot before)
If you reached recovery (stock) then connect with kies and choose recover firmware from kies options (near the word file in top) you should have active internet connection
You could try charging tab even for some hours before trying button cobinations
If not try to return as not rooted so warranty is goood
Sent from Galaxy S2 or Galaxy Tab2
Click to expand...
Click to collapse
Yup, this should get you going again. If you can get into download mode, you should be okay. That's what Odin needs.
Download mode is volume down plus power. Then volume up
Recovery mode is volume up plus power.

I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.

I can not understand how you can not access usb, is it a lacking driver so download kies and reboot and try connect again ,also try a different usb ports (esp the rear of case) of your computer
Was usb working before the problem?
do you have cwm or stock recovery?
If cwm so download cm10 or cm9 from www.teamhacksung.org and put in usb card and flash but do a cash delete and dalvik delete afterwards not for boot loop
If stock so try stock firmware from www.samfirmware.com (register their first) and put in sd card and try to flash
Sent from Galaxy S2 or Galaxy Tab2

growthweb said:
I want to thank both the posters on trying to help me. I did hold down the power and download button and it went in to the download mode. HOWEVER, since I can not access usb it did not do anything. Just kept saying downloading. As I mentioned in my first post I CAN ACCESS MY SD DISK FILES by doing the power up button thing. Thats the only way I can get files on. But the DOWNLOADING down arrow just does not do anything. hmmmmmmm will keep plugging away.
Click to expand...
Click to collapse
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.

All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
dictionary said:
I think you're misunderstanding download mode. When you get the device in download mode, connect it then to the computer, with Odin open. The only reason Odin wouldn't recognize it would be a driver issue. In that case, do as the previous poster stated. When you're in download mode, you're strictly flashing through Odin. You aren't going to see the device as a storage device on the computer. The only way your computer can interact with it at this point is Odin. Via Odin, flash the proper p3113 firmware file from sammobile/samfirmware (will be a large 600mb+ file). Once that's done, you should then be back to completely stock and healthy recovery and ROM. Reboot tab and see what happens. If it boots, and you still want to update, then make sure you get the correct ota for the base file you just flashed (that is, if you're trying to upgrade to say Jellybean). If you need more help always ask, but you should be fine. If I lived nearby I'd do it for you.
Click to expand...
Click to collapse

growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
How about you just gtalk me, lol. I'll probably reply faster there anyway. deliberation at gmail dot com.

Don't use kies. Install the Samsung driver for mobile phones (Google it).
Sent from my GT-P5113 using Tapatalk 2

Download Mode
growthweb said:
All I can say is unbelievable help here! Thank you. I am spending hours on this (plus a fortune on this new Tab 2 7). After studying up I do now understand how Odin works and how grabbing the correct firmware will do the job. HOWEVER (maybe others come across this huge roadblock) nothing can be done with out usb interaction. I DID DOWNLOAD KIES and installed it. But no matter what I do can not get any storage device listed or anything going on between tab and computer. Only thing my Tab does is when I plug it in to the computer via usb is go in to charging mode with the charging icon showing. Loading Odin does not show any connection. I have tried different computer USB plugins, 3 different computers (all I have loaded Kies on). Iam sooooooo close. If only while in the POWER BUTTON DOWN ARROW DOWNLOAD MODE and running ODIN on my computer there would be a connection I would be home free and able to flash firmware.
Click to expand...
Click to collapse
Once you are in download mode, connect your tab to the computer with the usb connection.....you should see a com xx number pop up in Odin in yellow reporting your device is connected thru a communication port. From there you will be able to choose the file you want as a PDA uncheck everything else...reboot...reset timer....whatever. Just make sure you have the correct firmware. There is a Odin flashback to Stock rom in the development section. Make sure it's for your device. Once you start Odin, should take about 4 mins...disconnect and hold the power button down to reboot. That's it....

Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help

growthweb said:
Hello Everyone Again, I just want to say thank you for all of you who took the time to help. I hopefully will become knowledgeable enough to help people in the forums as I gain knowledge. I finally did find the solution. I did everything that was mentioned. And no matter what what I did with KIES drivers Samsung usb drivers, etc could not get a connection so I could us Odin to keep me back to the orgiginal 800 mb 4.04 original file. My solution was (as mentioned) I deleted all my windows drivers dealing with usb, kies, etc. Then rebooted. I notice even though I did not have a direct usb connection showing up now Odin was showing a connection! So using Odin I got to restore everything and now back to like new. Lesson learned. Hope this helps others that almost fatally brick their tablets. Thanks again for all our help
Click to expand...
Click to collapse
Glad you got it sorted.

i jus did the same thing u did
hi how r u doing. i jus did the same mistake u did and i really need your help please

Maxwell255 said:
hi how r u doing. i jus did the same mistake u did and i really need your help please
Click to expand...
Click to collapse
Hi.if u have done the exact same thing then just read the previous page and comments.
Sent from my GT-P3110 using xda app-developers app

Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.

PeartFan40 said:
Glad to see you resolved your issue. In the future, question/help threads belong in Q&A only.
Thank You.
Because your issue has been resolved...
Thread Closed.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"If you choose not to decide, you still have made a choice"
Sent from my Galaxy Note (i717), using XDA Premium.
Click to expand...
Click to collapse
Thread is still actually open, lol

Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????

igotbricked said:
Is there any way to save my tablet if there is NO firmware out?
Im talking about the SCH I705, I followed the root guide, and it got ****ed up.
Unable to boot into recovery (it goes to Odin "could not do normal boot.")
Tablet seems unresponsive sometimes (to power on/off)
Will boot cycle occasionally
???????????????????
Click to expand...
Click to collapse
You have to reflash your tablet using ODIN. It's not that hard. Just follow the second method here (you don't need to download android SDK)
copy this in your navigator bar : rootzwiki . com/topic/37272-verizonsch-i705-root-for-all-current-firmware/ ( delete space around the dot)
Plus, your tab will be rooted.
You're welcome.
P.S : This limitation of URL is annoying as hell.

Soft Bricked Phone Help!

Hey all, new Android user here. I just rooted my device with no problems, but it dies and I recharge it, but it just goes to the "samsung" screen, and will vibrate 3 times quickly followed by another about 1/2-1 second later, then repeat every ~15-20 seconds. I am able to run it in ODIN (download) mode. I was told I need a new rom/firmware, can someone show me how to do this without ruining my device? I didn't save a backup because I assumed I would have no problems
I have had 0 problems before this, and even after root I didn't experience a problem.
Model: SM_G530T
FYI I am a mac user so have downloads be .dmg's.
Thanks in advance! If you need more info, tell me!

bump
pls help I want my phone back

You'll find your stock firmware on samsung-firmware.org
It'll be tar.md5 format, perfectly normal.
Add it into the AP/PDA in Odin and it'll flash fine.

u0aol said:
You'll find your stock firmware on samsung-firmware.org
It'll be tar.md5 format, perfectly normal.
Add it into the AP/PDA in Odin and it'll flash fine.
Click to expand...
Click to collapse
teach me how to upload to odin pls

Make sure all your drivers are installed, turn your phone off, plug the USB into the computer.
Start Odin (right click, properties, run as administrator and in xp compatability mode)
Put your phone into download ode (VOLUME UP, HOME, POWER)
Plug your phone into the computer. Odin will say "added" in it'd output box.
Press the button PDA or AP (depends on version) then select the firmware you just downloaded (tar or md5).
Once loaded into Odin, press start, it'll flash everything and then restart your phone.
Let me know if you need any more help!!
Edit:
Please ensure you are flashing the correct ROM for your phone. Bad firmware or recovery images can cause some bad problems.

u0aol said:
Make sure all your drivers are installed, turn your phone off, plug the USB into the computer.
Start Odin (right click, properties, run as administrator and in xp compatability mode)
Put your phone into download ode (VOLUME UP, HOME, POWER)
Plug your phone into the computer. Odin will say "added" in it'd output box.
Press the button PDA or AP (depends on version) then select the firmware you just downloaded (tar or md5).
Once loaded into Odin, press start, it'll flash everything and then restart your phone.
Let me know if you need any more help!!
Edit:
Please ensure you are flashing the correct ROM for your phone. Bad firmware or recovery images can cause some bad problems.
Click to expand...
Click to collapse
Is there a version of http://developer.samsung.com/technical-doc/view.do?v=T000000117 for mac? Could you give links to everything that I need to download? (I got this https://samsung-firmware.org/downlo...Mobile)/400h/TMB/G530TUVU1AOF8/G530TTMB1AOF8/) Also remember that my phone can't turn on, gets stuck at the T-Mobile part.

acheccone19 said:
Is there a version of http://developer.samsung.com/technical-doc/view.do?v=T000000117 for mac? Could you give links to everything that I need to download? (I got this https://samsung-firmware.org/downlo...obile)/400h/TMB/G530TUVU1AOF8/G530TTMB1AOF8/) Also remember that my phone can't turn on, gets stuck at the T-Mobile part.
Click to expand...
Click to collapse
Not that I'm aware of, but Google is your friend, friend.
Home + Volume Down + Power, that starts your phone in download mode which Odin uses to push software.
Your phone needs to be in download mode to do anything at all with Odin.
Also, why not just spin up a virtual machine and use the windows Odin, Windows is much better for all of this sort of stuff.

Bricked J3 2016 (SM-J320FN)

Hey there, I think my J3 2016 is bricked.
I accidently disabled the "OEM Unlock" in Developer Settings and now I am stuck at the samsung boot screen with a green text in left upper corner saying "Custom Binary blocked by FRP Lock".
I tried to flash the stock firmware with latest version of Odin, but the device isn't showing up. I have windows 7 and I reinstalled several times the drivers. My computer is recognizing it just as an Unknown Device.
Please help me, this is my only phone and at the moment I can't efford another one.

s4ss0 said:
Hey there, I think my J3 2016 is bricked.
I accidently disabled the "OEM Unlock" in Developer Settings and now I am stuck at the samsung boot screen with a green text in left upper corner saying "Custom Binary blocked by FRP Lock".
I tried to flash the stock firmware with latest version of Odin, but the device isn't showing up. I have windows 7 and I reinstalled several times the drivers. My computer is recognizing it just as an Unknown Device.
Please help me, this is my only phone and at the moment I can't efford another one.
Click to expand...
Click to collapse
It can be recovered (I've done that myself). Install Kies and smart switch for the drivers, reboot PC, Open Odin, put the stock firmware (preferably from sammobile) in the AP section, in options turn off auto-reboot, start phone in download mode (volume down, home button and power button together) and connect it,flash the firmware. When it's done reboot using vol up, down, home and power together until it turns on then switch on normally.
That's what worked for me, step by step.

Wulfie217 said:
It can be recovered (I've done that myself). Install Kies and smart switch for the drivers, reboot PC, Open Odin, put the stock firmware (preferably from sammobile) in the AP section, in options turn off auto-reboot, start phone in download mode (volume down, home button and power button together) and connect it,flash the firmware. When it's done reboot using vol up, down, home and power together until it turns on then switch on normally.
That's what worked for me, step by step.
Click to expand...
Click to collapse
The problem is that the phone isn't even showing in Device Manager. Installing and reinstalling drivers isn't useful.

s4ss0 said:
The problem is that the phone isn't even showing in Device Manager. Installing and reinstalling drivers isn't useful.
Click to expand...
Click to collapse
Hmm, I occasionally have issues if I use the wrong cable, have you tried changing that over?
The drivers should have sorted it out and made the phone visible really. I seem to remember that mine doesn't pop up in device manager if its in download mode (though that may be me remembering it wrong).

Wulfie217 said:
Hmm, I occasionally have issues if I use the wrong cable, have you tried changing that over?
The drivers should have sorted it out and made the phone visible really. I seem to remember that mine doesn't pop up in device manager if its in download mode (though that may be me remembering it wrong).
Click to expand...
Click to collapse
I have 6 cables, I've tried them all, not a single one works.

s4ss0 said:
I have 6 cables, I've tried them all, not a single one works.
Click to expand...
Click to collapse
Update; sometimes, if i connect the cable, the phone gets phisically found, but it isn't found like a device, just like "Unknown device". Can I do something?

s4ss0 said:
Update; sometimes, if i connect the cable, the phone gets phisically found, but it isn't found like a device, just like "Unknown device". Can I do something?
Click to expand...
Click to collapse
If no cables are working at all then I'm out of ideas sorry.
Ignoring Windows is a good bet, in download mode it often doesn't show up, focus more on whether or not you can see it in Odin, trying different versions of Odin can't hurt either I suppose.

Wulfie217 said:
If no cables are working at all then I'm out of ideas sorry.
Ignoring Windows is a good bet, in download mode it often doesn't show up, focus more on whether or not you can see it in Odin, trying different versions of Odin can't hurt either I suppose.
Click to expand...
Click to collapse
hey there, i just used an older version of odin as you told me and now it works. thanks for the help!

s4ss0 said:
hey there, i just used an older version of odin as you told me and now it works. thanks for the help!
Click to expand...
Click to collapse
No problem s4ss0, I'm glad it ended up being something fairly simple so you could get your phone back.

Connection issues
It is possible to get round the connection issue: Turn off the phone. Turn on the phone in download mode (vol-down, home, power). Connect a Samsung USB cable. Launch ODIN on your PC. Wait a few moments and you should see green text on top left of phone 'ODIN MODE'. Your phone is ready to take downloads.