[CWM][LIBS][TWEAKS]Updated Adreno Libs for & Tweaks - Galaxy Ace S5830 Android Development

Guys here are the updated Adreno libs​
How to Install:-
-Reboot into Recovery Mode
-Install zip from sd card
-Flash the attached zip
-Reboot
Noticeable Changes:-
-Animations smoothen a lot
-Performance and Speed Increases
-Benchmarks also Increase {It would be great if anybody could post screenshots}
Credits:-
-XDA Community
-KevinXI
Note:-
-Tested on Stock Roms and CM7 Builds
-Not Tested on CM9 and also you shoudnot as Maclaw says no
Dont forget to hit THANKS !!
MOD EDIT: ATTACHMENT REMOVED

DO NOT INSTALL AT CM9/ICS!
Wysyłane z mojego GT-S5830 za pomocą Tapatalk 2

could this be used for stock roms?

Macław said:
DO NOT INSTALL AT CM9/ICS!
Click to expand...
Click to collapse
ya sorry forgot to mention that
Wysyłane z mojego GT-S5830 za pomocą Tapatalk 2[/QUOTE]
winxuser said:
could this be used for stock roms?
Click to expand...
Click to collapse
ues it works on stock roms

what about the CM7.2, yeah i am just a noob on this....
and can i do it on lewa ROM (based on unofficial CM7.2)

Koogly said:
what about the CM7.2, yeah i am just a noob on this....
and can i do it on lewa ROM (based on unofficial CM7.2)
Click to expand...
Click to collapse
not tessted!!Give a try and revert

can we have a restore/uninstall zip too ? ? ?
just cant restore backup from cwm.. it takes hell lot of time

Just flashed on LeWa 08.06 phone boots normal and i think it works with one idea better...
perhaps two,but it is better than before

KevinXI said:
Guys here are the updated Adreno libs​
Click to expand...
Click to collapse
LeWa ROM already have these libs preinstalled.

charlessxavier said:
can we have a restore/uninstall zip too ? ? ?
just cant restore backup from cwm.. it takes hell lot of time
Click to expand...
Click to collapse
why u need restore ?
Lovetz said:
LeWa ROM already have these libs preinstalled.
Click to expand...
Click to collapse
But people say that it makes them fell better after installing these
meke4ek said:
Just flashed on LeWa 08.06 phone boots normal and i think it works with one idea better...
perhaps two,but it is better than before
Click to expand...
Click to collapse

Will try , and see

KevinXI said:
But people say that it makes them fell better after installing these
Click to expand...
Click to collapse
It is widely known in our forum, the effect of "placebo"))

KevinXI said:
why u need restore ?
Click to expand...
Click to collapse
man, just to be in the safer side.. what if something happens wrong ?
is it that hard for u to do ? do only if u can.. or else no problem

can be used with adrenaline engine ??

Are you sure this is made by you?
I already have a copy if it which is having the exactly same build.prop tweaks. And everything else is the same! Even the updater script!
This was sent from my Galaxy Ace, but who cares?

Thanks buddy trying it now.
Edit:
Without a doubt my rom is smoother than before.

Last rom from vo-01 already got this?

Guys cm7 (all versions) already has this updated libs.. I think that this update is useful only for stock rom realesed before the DDQK8.. With stock 2.3.3 all is smoother (List of widget for example) but i can't See bootanimation
Inviato dal mio GT-S5830 con Tapatalk 2

Are this libs working too with Mini,Fit,Gio etc?

alexfreakyy said:
Are this libs working too with Mini,Fit,Gio etc?
Click to expand...
Click to collapse
I think you must do from our pack of Adreno Libs, your own cwm pack. Think this one will not work on gio fit or else similar phone.
But always you can test it
Wysłano za pomocą budki telefonicznej.

Related

[WIP][ROM] MokeeOS Dhalham-GalaxyACE

Hey guys, this is a port of the rom MoKeeOS for Galaxy Ace. The current status is BETA/RC, everthing works except minor bugs. This rom is based on CM 7.2 by vo-1.
Downloads:
RC1:Temporarily removed.
RC1.1: http://www.multiupload.co.uk/DUMAPRNVIL
Working:
Swipe notifications(HOT)
Swipe settings
3D and 2D rendering
Boot successfully
Keyboard
Overclock (must flash the latest http://www.clockworkmod.com/rommana...&name=Superuser&deviceName=Samsung Galaxy Ace )
Camera
Bluetooth
WiFi
Very smooth
Nearly everything else
Not working/Bugs:
Phone app and contacts android acore FC (thats a problem with the MoKeeOS team since they currently dont support mdpi devices).
Report anything else.
Flash instructions:
Wipe data/factory reset
Wipe dalvik
Flash MoKeeOS
Flash latest superuser: http://www.clockworkmod.com/rommana...&name=Superuser&deviceName=Samsung Galaxy Ace
Reboot
Press thanks if you like!
Screens at the bottom!
Changelogs:
RC1: Booting. Based on CM 7.2. Give some feedback please! Most things work.
RC1.1: Cleaned alot of apps.
Reserved
SIR. This ROM has already made by CCGH . dont REPOST please.
link : http://forum.xda-developers.com/showthread.php?t=1723633
This thread might be closed by moderators
Shadow xD said:
This thread might be closed by moderators
Click to expand...
Click to collapse
Yes. Coming soon threads aren't allowed. At least post some details.
Btw unless yours is bug free, there is already a WIP port by Robin
Its fully hdpi plus not everything works.
Can someone gimme the link to Robin's version?
Maclaw has a coming soon AOSP ICS rom.
King ACE said:
Can someone gimme the link to Robin's version?
Click to expand...
Click to collapse
Well.. i did it in my post right
Sent from my GT-S5830 using Tapatalk 2
dhalham said:
Maclaw has a coming soon AOSP ICS rom.
Click to expand...
Click to collapse
No offence bro, but he has posted sufficient details. That is why I told you to put up some details. Anyway good luck for your work.
if your making a coming soon thread then u have to give details (about rom& bugs)
this way moderator is gonna close thread
and btw guys just because this rom was already ported doesnt mean he cant post his version
dhalham said:
Building, nearly done!
Click to expand...
Click to collapse
building
Sucess it boots! Redesigning post and uploading file!
Done! Check it out!
nice, but how are we supposed to make calls in this rom ?
This has warez!
Sent from my GT-S5830 using Tapatalk 2
diegonnc said:
nice, but how are we supposed to make calls in this rom ?
Click to expand...
Click to collapse
Im working on that, since MoKeeOS has problem with mdpi.
NathanBookham said:
This has warez!
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Whats warez?
dhalham said:
Whats warez?
Click to expand...
Click to collapse
Warez are paid apps and if this rom haves warez i suggest you to remove the link or a mod will come...
Sent from my GT-S5830 using xda premium

New cyanogen nightly is out

Peeps, new cyanogen nightly has been released on 2nd Feb. I'm a little late to know and inform you guyz out.
Here's the download link http://download.cyanogenmod.org/?device=buzz&type=nightly
So lets discuss about this.
I find it much fast and stable than before. No bugs too
Which means I will try it oru now and edit this post after testing a lil!
Whats new in these nightlies? I mean when we have a fully stable cm 7.2 then whats the use of these nightlies?
AndroidAddiction said:
Whats new in these nightlies? I mean when we have a fully stable cm 7.2 then whats the use of these nightlies?
Click to expand...
Click to collapse
I like nightly's alot. They are also stable with no bugs. Also they are the improved form of stable build. With the new once, it creates a perfect balance b/w performance and battery.
Odp: New cyanogen nightly is out
Any changes and bugs?
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
drewniany92 said:
Any changes and bugs?
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
Click to expand...
Click to collapse
I found no bugs . 2nd day of testing. Maybe minimal improvements.
Odp: New cyanogen nightly is out
Installed and changed back to sense rom. Idk why but i wasn't able to download apps from market. I restarted phone a few times and it still said that there is error and download cannot be completed. Same situation with cm7 stable. Strange situation because stable version always worked perfect for me );
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
drewniany92 said:
Installed and changed back to sense rom. Idk why but i wasn't able to download apps from market. I restarted phone a few times and it still said that there is error and download cannot be completed. Same situation with cm7 stable. Strange situation because stable version always worked perfect for me );
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
Click to expand...
Click to collapse
Strange. Never happened to me.
Odp: New cyanogen nightly is out
Maybe it is connected with that i couldn't install any sense rom for a few days. Cwm told me that installation is aborted and i tried few days later and it worked perfrctly. Anyway, my willy is almost 3 years old so maybe that is the issue (;
爷爷发送野火 (sent from grandpa willy :3 )
drewniany92 said:
Maybe it is connected with that i couldn't install any sense rom for a few days. Cwm told me that installation is aborted and i tried few days later and it worked perfrctly. Anyway, my willy is almost 3 years old so maybe that is the issue (;
爷爷发送野火 (sent from grandpa willy :3 )
Click to expand...
Click to collapse
Wow... its maybe my 7th week with willy
Although earlier my dad had it.
I use nightlys no problems with them whatsoever only screenshot is bug but who cares.
Anyone know where we can find changelog for nightlys ???
massofsin said:
I use nightlys no problems with them whatsoever only screenshot is bug but who cares.
Anyone know where we can find changelog for nightlys ???
Click to expand...
Click to collapse
Bbqlog from playstore
https://play.google.com/store/apps/details?id=org.bbqdroid.log
Odp: New cyanogen nightly is out
downloaded again, installed and it works so far. idk what happened then anyway, imo it is little bit faster than latest stable version :3
爷爷发送野火 (sent from grandpa willy :3 )
drewniany92 said:
downloaded again, installed and it works so far. idk what happened then anyway, imo it is little bit faster than latest stable version :3
爷爷发送野火 (sent from grandpa willy :3 )
Click to expand...
Click to collapse
Yup. Nightlies are improved versions of stable.
I dont know what they did but its super fast :victory:
Dont quite understand that change log... but it runs very smooth
massofsin said:
I dont know what they did but its super fast :victory:
Dont quite understand that change log... but it runs very smooth
Click to expand...
Click to collapse
Yup.
Odp: New cyanogen nightly is out
yeah, it is fast anyway i found much faster and probably the fastest rom for willy. you won't belive me until u won't try ). it's cm6.1 stable version. rom which was released about 3 years back
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
drewniany92 said:
yeah, it is fast anyway i found much faster and probably the fastest rom for willy. you won't belive me until u won't try ). it's cm6.1 stable version. rom which was released about 3 years back
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
Click to expand...
Click to collapse
Can you do a video? Or tell differences between cm6.1 and cm7??
massofsin said:
Can you do a video? Or tell differences between cm6.1 and cm7??
Click to expand...
Click to collapse
The only bug with cm6 was non functional camcorder.Its fast but looks visually old.
Wasimk32 said:
The only bug with cm6 was non functional camcorder.Its fast but looks visually old.
Click to expand...
Click to collapse
but is it faster?

[flashable zips] S2W & DT2W - enable / disable

With how much I change / update my ROM and kernel, I wanted a fast and easy way to just flash something to enable DoubleTap2Wake and Sweep2wake because I use both a lot.
I didn't want to have to download or pay for any 3rd party apps that stay open all the time, or only work half the time, and got tired of manually putting the init.d files and changing permissions every time I flash something, so I made some flashable zips (with a little help from XDA members efrant, Moscow Desire, Jonny, and GermainZ).
Figured I'd share, not sure if there's interest; but just in case you're like me and like these mods... Just make sure you have a kernel that supports these mods. I've been using bricked kernel for a while now with zero issues.
Flash the one you want, I included the uninstaller for all. If you flashed both DT2W and S2W and just want one of them, flash the one you want, it will remove the other one.
This eliminates the need to install any app or anything to enable these mods.
Use a kernel you find that specifically states it supports S2W and DT2W.
Thanks for this. Great idea
sent from my HAMMERHEAD neXus
Thank you so much, was looking for a way to get it besides touch contro
Edit: I flashed the second and third one and they both didn't work and I got Franco kernel as my kernel
Sent from my Nexus 5
Awesome! Makes waking the N5 easier!!
shogun656 said:
Thank you so much, was looking for a way to get it besides touch contro
Edit: I flashed it and it didn't work and I Franco control working
Sent from my Nexus 5
Click to expand...
Click to collapse
I've only tested it using bricked kernel, but it should work on any of them that use the same enabling commands. Can you link me to the kernel thread you're talking about?
orangekid said:
I've only tested it using bricked kernel, but it should work on any of them that use the same enabling commands. Can you link me tot he kernel thread you're talking about?
Click to expand...
Click to collapse
Here you go
http://forum.xda-developers.com/showthread.php?t=2508284
Sent from my Nexus 5
Bookmarked
shogun656 said:
Here you go
http://forum.xda-developers.com/showthread.php?t=2508284
Sent from my Nexus 5
Click to expand...
Click to collapse
That kernel does not support S2W and DT2W.
Flash one of these:
http://forum.xda-developers.com/showthread.php?t=2524557
http://forum.xda-developers.com/showthread.php?t=2519607
http://forum.xda-developers.com/showthread.php?t=2527130
http://forum.xda-developers.com/showthread.php?t=2551441
or any others you find that specifically state they support S2W and DT2W.
Working stock 4.4.2 and stock kernel ?
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
rasta312 said:
Working stock 4.4.2 and stock kernel ?
Wysłane z mojego Nexus 5 przy użyciu Tapatalka
Click to expand...
Click to collapse
No, unless someone put up a stock kernel with showp's modifications.
orangekid said:
That kernel does not support S2W and DT2W.
Flash one of these:
http://forum.xda-developers.com/showthread.php?t=2524557
http://forum.xda-developers.com/showthread.php?t=2519607
http://forum.xda-developers.com/showthread.php?t=2527130
http://forum.xda-developers.com/showthread.php?t=2551441
or any others you find that specifically state they support S2W and DT2W.
Click to expand...
Click to collapse
So I tried bricked and its still not working
Sent from my Nexus 5
shogun656 said:
So I tried bricked and its still not working
Sent from my Nexus 5
Click to expand...
Click to collapse
I use the betas, maybe it's not fully integrated in the "stable" ones, but have never had a single issue with the beta kernels.
Try this one, performs like a boss for me and 100% supports these mods
http://bricked.de/downloads/kernel/hammerhead/exp/bricked_hammerhead_20131206_183835_exp-516a802.zip
flash the kernel, flash the zip file from the OP you want, and let me know what happens
orangekid said:
I use the betas, maybe it's not fully integrated in the "stable" ones, but have never had a single issue with the beta kernels.
Try this one, performs like a boss for me and 100% supports these mods
http://bricked.de/downloads/kernel/hammerhead/exp/bricked_hammerhead_20131206_183835_exp-516a802.zip
flash the kernel, flash the zip file from the OP you want, and let me know what happens
Click to expand...
Click to collapse
Sorry to keep bothering you but it's still not working and I flashed the kernel and the zip and its still not working, I even tried removing and reflashing the zip but it still isn't working
Sent from my Nexus 5
shogun656 said:
Sorry to keep bothering you but it's still not working and I flashed the kernel and the zip and its still not working, I even tried removing and reflashing the zip but it still isn't working
Sent from my Nexus 5
Click to expand...
Click to collapse
That's odd.
Which zip are you flashing?
orangekid said:
That's odd.
Which zip are you flashing?
Click to expand...
Click to collapse
S2W and DT2W.zip and the DT2W.zip
Sent from my Nexus 5
shogun656 said:
S2W and DT2W.zip and the DT2W.zip
Sent from my Nexus 5
Click to expand...
Click to collapse
It might be a 4.4.2 thing, I am on 4.4.
Are you on a rooted stock ROM?
orangekid said:
It might be a 4.4.2 thing, I am on 4.4.
Are you on a rooted stock ROM?
Click to expand...
Click to collapse
That is probably it, I'm on 4.4.2 stock odex, no custom rom
Sent from my Nexus 5
shogun656 said:
That is probably it, I'm on 4.4.2 stock odex, no custom rom
Sent from my Nexus 5
Click to expand...
Click to collapse
Do me a favor and try this one and let me know if it works.
orangekid said:
Do me a favor and try this one and let me know if it works.
Click to expand...
Click to collapse
It didn't work, it gave me [status 6] installation aborted
Sent from my Nexus 5
Does it work with Cataclysm?
Sent from My Nexus 5 ?.

PLease all Dev's have a look

well it is just awesome that i today found. i think this is important.
http://www.gsmarena.com/samsung_galaxy_fit_s5670-3726.php , this phone has low performance than us and it has got kitkat...
now http://forum.xda-developers.com/showthread.php?t=2581415 form., as per instructions the kernel 3 even is not available for this phone but still it is working :good:
so can we work with this thing ?
probably not, because the main difference is GPU );
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
Well, what you want porting or building from source?
Porting will not work because we don't have the updated kernel which will work on KitKat.
For building from source we need an updated KitKat device tree which we also don't have!
So we need a developer who can do one of these things, which is to advanced for me, sorry.
If I'm false, correct me
Building from source, sasakovic, could you try ? As you are the last dev who know how to build from source for the wildfire.
Sent from my HTC Wildfire using xda app-developers app
Well nothing
SasaKovacic said:
Well, what you want porting or building from source?
Porting will not work because we don't have the updated kernel which will work on KitKat.
For building from source we need an updated KitKat device tree which we also don't have!
So we need a developer who can do one of these things, which is to advanced for me, sorry.
If I'm false, correct me
Click to expand...
Click to collapse
if you clearly see this phone got no GPU and moreover. the phone has low ram than us. so the thing is that there is no 3 kernel available for this ROM it is mentioned in that threat. so can't we port this baby ??:silly:
WEll i don't find GPU ?? anywhere in the features of this phone
drewniany92 said:
probably not, because the main difference is GPU );
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
Click to expand...
Click to collapse
XDAevDB Information
Cyanogenmod 11 for Galaxy Fit, a ROM for the Samsung Galaxy Fit GT 5670
Contributors
yajnab, yajnab
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 2.6.x
Based On: CyanogenMod
and here is kernel 2
but they ported it from galaxy mini i think (;
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
it has GPU !!! pathetic Phone
drewniany92 said:
but they ported it from galaxy mini i think (;
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
Click to expand...
Click to collapse
well i am not developer...and what i wan't to ask that ..can't anybody try to port it. coz we has more ram and internal memory then that phone !!!
but our device is different than galaxy fit. look what sasa said before (;
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
i see
drewniany92 said:
but our device is different than galaxy fit. look what sasa said before (;
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
Click to expand...
Click to collapse
well i see..the only porting expert which i know left wasim32 who didn't gave his reply on this threat. i tried to contact him for this. but in vain he didn't gave any reply...sasa said we don't have kernel. even kylon has left he knows how to work with kernels. i tried to contact erwin,hdcr jacob but all in vain. nobody has replied either they are not available or they don't see their PM
imo the biggest success is that our device handles ics quite good. we also have working cm10 and cm10.1 but those roms aren't work as they should work without kernel 3 but in fact, they work wildfire wasn't designed to be fast device etc but devs made it as fast as it was possible and i am very glad to them for their effort
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
well yeah i am also thankful to them too
drewniany92 said:
imo the biggest success is that our device handles ics quite good. we also have working cm10 and cm10.1 but those roms aren't work as they should work without kernel 3 but in fact, they work wildfire wasn't designed to be fast device etc but devs made it as fast as it was possible and i am very glad to them for their effort
Wysyłane z mojego HTC Wildfire za pomocą Tapatalk 2
Click to expand...
Click to collapse
well i am also thankful to them too...i keep on trying again and again to contact them. erwinp is busy with his college i think he is now a doctoral student. he is busy with his thesis. he was the fastest person to work on the cm9 and his works are still the best those are used to make willy travel this far ....
kylon's phone has broke and he is not seen active in this threat anymore
Yes, it's build with 2.x.x Kernel version but the drivers has to be updated to fit in KitKat.As Android uses a monolithic kernel.So in kernel there is everything present like display-, audio-, cpu-drivers,....
And I already said that we need an updated device config.
hmm
SasaKovacic said:
Yes, it's build with 2.x.x Kernel version but the drivers has to be updated to fit in KitKat.As Android uses a monolithic kernel.So in kernel there is everything present like display-, audio-, cpu-drivers,....
And I already said that we need an updated device config.
Click to expand...
Click to collapse
well so what basically we need a programmer who has decent knowledge. let me make efforts to contact some more developers. :good:
sachoosaini said:
well so what basically we need a programmer who has decent knowledge. let me make efforts to contact some more developers. :good:
Click to expand...
Click to collapse
You can try it but see this post: http://forum.xda-developers.com/showthread.php?t=2470735&page=18
I build a new version of CM10.1...
And read up what I said there!
hey try this list here
SasaKovacic said:
You can try it but see this post: http://forum.xda-developers.com/showthread.php?t=2470735&page=18
I build a new version of CM10.1...
And read up what I said there!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1596800
a list of all the brothers of arm6 famlily..
He guys I have done work for our willy, cm11 is ready just need latest recovery to install can anyone do that. This is true I will soon upload my build here
Sent from my Wildfire using xda app-developers app
startracker said:
He guys I have done work for our willy, cm11 is ready just need latest recovery to install can anyone do that. This is true I will soon upload my build here
Sent from my Wildfire using xda app-developers app
Click to expand...
Click to collapse
You can try the cwm recovery builder from his website buzz should be compatible.
Sent from my HTC Desire S using Tapatalk
heavy_metal_man said:
You can try the cwm recovery builder from his website buzz should be compatible.
Sent from my HTC Desire S using Tapatalk
Click to expand...
Click to collapse
kylon's v6 cmw link is down can anyone provide the link its needed
startracker said:
kylon's v6 cmw link is down can anyone provide the link its needed
Click to expand...
Click to collapse
You've ported a cm11 ROM?
Or did you build it from source..?
It's almost impossible to port a KitKat ROM to the HTC WF, due to no gpu rendering, and as far as i'm concerned our device hasn't even got the 3.x.x Kernal yet, I know developers like erwin, symp, and kylon could of done this. But they left the WF section.
Btw if you said you have a cm11 ROM for the WF, then why not take a quick picture of the ROM, or how you did it?
Anyway would be fine, because it would be awesome to see someone who has got it on the HTC Buzz.

Z5ExperienceSP 5.1.1 [LBL]

Hi all,
I'm working on new rom,Z5ExperienceSP..its based on latest cm12.1 lbl rom..
If you have any idea please post it here.
Screenshots in attachmants...
Just one question please, why CM 12.1 LBL? Does the sim card problem fixed?
Sent from my Xperia SP using Tapatalk
OsGhaly said:
Just one question please, why CM 12.1 LBL? Does the sim card problem fixed?
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
Working on sim fix.
vwadam said:
Working on sim fix.
Click to expand...
Click to collapse
Cant wait to have a working 5.1.1 for lbl, Rom looks gorgeous too
Thank you
Thank you and make it quickly quickly quickly ​
Tnx
Can you fix sim card problem ?
Can you add floating windows (AICP rom has this feature) to this rom ?
Do you want to add x-reality and super vivid mod to this rom ?
miladn78 said:
Tnx
Can you fix sim card problem ?
Can you add floating windows (AICP rom has this feature) to this rom ?
Do you want to add x-reality and super vivid mod to this rom ?
Click to expand...
Click to collapse
Hi,
Working on fix for sim card.
I will try add floating windows.
X-Reality for mobile and Mobile Bravina Engine 2 already added.
vwadam said:
Hi,
Working on fix for sim card.
I will try add floating windows.
X-Reality for mobile and Mobile Bravina Engine 2 already added.
Click to expand...
Click to collapse
But really xreality n bravia engine 2 works?
sid_salvi said:
But really xreality n bravia engine 2 works?
Click to expand...
Click to collapse
Only one x reality or bravia engine 2 will be added
Stamina mode addition
please add the power management appand stamina mode of xperia .
because rom drains more battery quickly,if power management app is added,it would be a complete rom.
it wold be helpful for every one...
Great job bro keep it up :good:
Good that its based on lbl some ppl can't unlock it like me :crying:
This looks really cool. Will this be available to unlocked bootloaders too?
Do you want to use Adrian DC's new kernel for CM12.1 ?
destiny4life said:
This looks really cool. Will this be available to unlocked bootloaders too?
Click to expand...
Click to collapse
UBL users can use UBL as well as LBL ROMs
miladn78 said:
Do you want to use Adrian DC's new kernel for CM12.1 ?
Click to expand...
Click to collapse
Adrian's Kernel Source is for Unlocked Boatloaders
Btw, good work dev [emoji106]
Sent from my Xperia SP using Tapatalk
Please fix VPN issue, I realy need it
Arvind7352 said:
UBL users can use UBL as well as LBL ROMs
Adrian's Kernel Source is for Unlocked Boatloaders
Btw, good work dev [emoji106]
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
Oh, that's great.
Any idea how much time it will take to develop this rom?
miladn78 said:
Please fix VPN issue, I realy need it
Click to expand...
Click to collapse
Don't ask for ETA's for fixes and stuff, PLEASE... this work is a Part of his FREE time...
destiny4life said:
Oh, that's great.
Any idea how much time it will take to develop this rom?
Click to expand...
Click to collapse
No idea [emoji4]
Sent from my Xperia SP using Tapatalk
Thank you for this awesome ROM, very original and unique, and most importantly, it's CM12.1 based Woow
I have a question though, does the lightbar work? does it interact with the system like in stock ROM, for instance, does it change colors and beat along with Music app AKA Walkman? Thank you very much and looking forward to future updates.
You, Mr.The Developer... you sir will make a huge achievement for the locked bootloader owners if you successfully complete this rom. :thumbsup:
Sent from my Xperia SP using XDA Forums Pro.
lightbar works with notifications...but light nt beat with music app... if you want this feature try discolight apk...

Resources