Related
Current Situation:
When I say bricked, I mean BRICKED in all caps. The phone is completely unresponsive. If I try to turn it on – no good. If I try to put it in bootloader mode – no response. If I hold the volume button down and depress the power – no menu displays. I get no ‘M’. I get nothing. Except…
If I fire up RSD Lite 4.9 and plug in the phone, it does recognize something. Under model it displays “S Flash OMAP3630”. If I load up an sbf file (I’ve been following Higgsy’s incomparable “How To” guide - http://forum.xda-developers.com/showthread.php?t=853674 and using the generic UK sbf file he recommends) and depress “Start” within RSD Lite, the phone will display “SW Update In progress…” in white blocky text. RSD Lite says it’s executing and, after several minutes will display a Status of “Finished” and a Result of “PASS”. On the phone, the screen goes dark but a white notification light displays. While the phone is still plugged in, I can depress the power button on and off and RSD Lite will recognize it’s there (if it’s on) or not recognize the phone is there (if the power is toggled off).
Note that the battery is fully charged.
I’ll give you a little background info:
Background:
I purchased Defy phones for my wife and me for Christmas. Her’s is working fine, is unrooted, and has only a few apps beyond stock (Angry Birds of course!). But of course I had to play with mine. All went well until I (stupidly) installed the latest T-Mobile update which removed my root access. This was not acceptable to me as I had overclocked my phone for performance purposes. I had a really hard time getting root access back until I at last found a version of SuperOneClick that did the trick.
By this time I had reset the phone back to factory settings. So I thought “Well, I might as well flash some cool ROM”, so I flashed a Gingerbread themed Froyo cooked up for the Defy. Unfortunately, it didn’t work (for whatever reason). I was stuck at the dreaded ‘M’.
Next I started following Higgsy’s guide (as mentioned above) but I guess I screwed something up because now the phone is totally unresponsive except as detailed above.
So where do I go from here? Some possibilities:
Flash T-Mobile 2.2 test sbf?
Link?
Flash Original SBF?
Link?
I’ve still got my wife’s phone which is working perfectly fine. Is there a way to copy files from her phone to my dead phone and get some life?
Do you guys have some other steps you’d recommend?
I’d really like to get my phone working again and would much appreciate the help. Many thanks in advance.
(Note that I’m a Noob so please don’t assume I know anything!)
(Yet another note: I'm in the USA.)
Which .sbf's and in which order did you install them?
The same happened to me after I'd flashed the 3.4.2 sbf, then tried to downgrade back to 2.34. it went blank and I had to reflash 3.4.2 again.
If you've flashed 2.51 or 3.42 then you can't downgrade from them. So the fix would be to flash the same rom again.
I have the same problem and this how i fix it
1.http://forum.xda-developers.com/showthread.php?t=892026&highlight=low+battery your phone will show in rsd lite
2.flash http://forum.xda-developers.com/showthread.php?t=933555 with him you get a error that can not be installed
3. disconnect phone from USB and remove the battery
4. Replace the battery in the phone and power up, and phone immediately go into the bootloader
5. Flash bootonly http://forum.xda-developers.com/showthread.php?t=899450
6. and finaly flash http://forum.xda-developers.com/showthread.php?t=922430
it works for me
sorry for bad english
Solved
I flashed http://forum.xda-developers.com/showthread.php?t=922430 per your suggestion and I'm now up and running. Thank you.
Motorola Defy bricked
hi
i have a question about my defy. The white led is still shining but there is no connection to the pc. I connected via USB-cable.
pls HELP!!!!!
I have a similar issue as the OP..
I originally rooted the phone using simpleoneclick... then I overclocked it using setvsel...
it was running fine for an hour or so, and then I ran quadrant (several times over the course of the hour) and the final time, it rebooted during the middle of a test, and then it would just keep looping the bootup moto logo and "android" screens.
at that point I could still enter the bootloader and recovery screens. I tried wiping data and resetting to factory defaults with no avail.
Finally I followed a thread on flashing a new rom to the phone with RDSLite and the uk rom. After getting it to finish flashing and it showing a 'Finished' and 'PASS' status as the OP mentioned, te phone now no longer responds. Power button does not trigger the screen to go on, regardless of if I try to press the volume buttons with it or not.
The only response I get from it is when it is connected to the computer, the white led turns on, and the computer (and rdslite) recognizes it. I can still flash it with rdslite and the screen turns on displaying the SW update In progress message...
but that's about all I can get it to do.
Any help and advice would be greatly appreciated
edit: I should also mention that after the uk 2.21 rom I've also tried the china 2.2.1 roms.... Should I also try flashing the 2.51 uk version as well?
Okay, I tried a few more roms and this one "JRDNEM_U3_3.4.2_117-00..." has everything back up and running...
however now i'm running into the issue of apps that i've 'downloaded' not actually installing...
bricked
same problem here. rsd can detect my phone but still failed flashing. i changed and renamed the /sbf but still doesnt work... please help
MB525 Defy Bricked
MB525 Defy bricked and rsd cannt detect my phone failed . ... please help
its dead. Actually i uninstalled busybox and in this process all the system files also deleted by busybox. now phone is not starting. if anyone can suggest. I was using MIUI rom. can any one make it alive again.
[email protected]
. ....please help
Same problem here, but my phone is only detected by a friend's laptop. I think I have to flash Defy+ rom
try to flash sbf use rsd
If your phone is detected by RSD Lite, then you have an easy fix in just flashing a new sbf. If it's not detected and you can't charge your battery, you're going to have to use the MacGyver method.
if sbf doesnt work u better send it to warranty
Well. On my computer the phone isn"t even recognized. Maybe because some RSD Lite files are missing and it need them to detect bricked defy (i did reinstalled RSD Lite)
If it's recognised on your friend's computer but not on yours then it means that you probably have the versions of the motorola drivers or rsd lite that have problems.
white led solution
hope for defy with only white led light turning on. This assumes that you have already have mototola drivers and RSD lite installed.
Background : I only had defy one day when I decided to flash it with miui. I bricked on the first time with bootloops. Did research and got drivers and rsd lite. managed to find three stock t mobile roms and flashed to stock Tom, then flashed miui, since then I've been switching between miui and cm7.
Problem : After a few months of use, I decided to flash stock rom to see how the battery life would be like. Bricked it the first time with bootloops. I thought I had flashed it with wrong rom because the first time I flashed back to original rom I did not delete the roms that I thought were the original roms. So after first failure I tried to flashed with the other roms I had. after the third rom it would not go into bootloader, only white led would turn on. Tried macguiver, did not work so save your usb cable, don't mess with it ain't gonna work.
Two part solution: I realized that when I plugged phone with usb I would hear the usb tone on win 7. When to device manager and saw the other device or something like that was appearing and disappearing when I would connect and disconnect phone. I clicked it and it said Motorola device or something like that, it was sensing my defy! defy drivers were wipe out due to bad flash. I had mototola drivers so I clicked on update and searched for mototola drivers on hard drive. I had rsd lite on and it recognized the defy after driver update, even though the bootloader screen was not on and just the white led was on.
decided to flash rom that have me bootloop and it flashed it but still gave me a bootloop., by the way, the update part of bootloader showed up after a while.
Second part of solution: googled problem and found out that the phone has a stock recovery. its the robot with the triangle exclamation mark. when you get to it you have to touch the extreme lower right hand corner of the screen to get to where you can wipe data and cache. when you start wiping data / cache you have to press on ok?? on lower left hand of the screen repeatedly until wipe is complete. then reboot and tada it boots up to stock tmo USA defy.
this is the stock rom I used : JORDN_U3_6.36.0
F Y I
if you ever try to flash a rom and it just bootloops, just go into stock recovery and wipe data and cache and you should be able to boot into android.
I'm Mc Gayvering my phone. Just tried a led directly connected to USB and fried it
This is my last hope
Is your phone worked?
I have the same problem. I try many ROM,But all of them dosn't work.
When I put in the battery,it shows Bootloader,When i flash a ROM use RSD，the phone always display SW Update In progress... Then the RSD's status is error verifying code group XX(XX=32/33/39/40 etc.) checksums.
What should I do?
THS.
Help :mad :
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
wesleybinho said:
Hello, I'm having a problem with my Motorola Defy, he is not popping no FBS. he is not linking a black screen, but the white light is on, but when I try to install the SBF appears SW Uplidate im Progress .. can someone help me
Click to expand...
Click to collapse
dude this is all same **** u flashed wrong sbf.
flash the sbf service flash higher or same version which came by default wid ur phone.
flashes here http://and-developers.com/sbf:defy
good night friends!
I'm here asking for this help not for lack of looking for the solution, sorry my bad english, I'm from Brazil and I
defy caught in a bootloader, I tried almost everything I found here in the forum, but most of the problems is
reset solved by making the recovery, but in my defy the recovery does not open, the flash works only power + vol up, already
I spent several roms to no avail, could someone help me run my recovery? grateful heart
list of roms flashead
JRDNEM_U3_3.4.2_155-002_DEBLUR_SIGN_SIGNED_UCAJRDNEMARAB1B80AA03A.0R_PDS03C_USAJRDNFRYORTCEE_P011_A010_HWp3_Service1FFJORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbfz
JORLA_U3_3.4.2_107-7_R02_SIGNED_USAJORDMR1B15CLABRLA019.0R_JORLAFROCLABRLA_P009_A008_M002_HWp3_Service1FF.sbf
JRDNEM_U3_2.34.1_DEBLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA02B.0R_USAJORDANRTCEE_P029_A019_HWp3_Service1FF.sbf
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_2.59.0_CHN_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA035.0R_USAJORDANRTHKTW_P021_A015_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_3.4.2_164-003_VFBLUR_SIGN_SIGNED_USAJRDNEMARAB1B8VFFR03A.0R_PDS03C_USAJRDNFRYOVFFR_P028_A014_M004_HWp3_Service1FF.sbf
Motorola_Defy_Nu___Android_2.2_FroYo
shadow_defy_2.3.3_85_Orange
If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(
mmec2 said:
If you turn it on while holding "dolume down" do you get the android+! screen? Some go into recovery if you touch the bottom right corner of the screen, but on some you have to hold volume up + down together. I had this problem today!
If you actually can't get to the screen with the android+! then I don't know what else you could do :-(
Click to expand...
Click to collapse
I really can not, no way to go to the screen with the robot android! he goes right on the logo motorola M!
can it be hardware problem?
1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.
farsight73 said:
1) Did you use the correct flasher? rsd4.9 with motorola driver installed properly.
2) If (1) not working, you could use motorola own service update from their site.
Click to expand...
Click to collapse
I'm using motorola rsd 4.9 with updated drivers, what happens is install the rom normal after reboot gets stuck in the Motorola M logo, the software update site does not recognize my phone, do all these roms that I would be no my phone?
im tried this roms now
JRDNEM_U3_2.51.1_BLUR_P3_SIGN_SIGNED_UCAJRDNEMARAB1B80AA030.0R_USAJORDANRTFR_P043_A010_HWp3_Service1FF.sbf
JRDNEM_U3_3.4.2_117-002_BLUR_SIGN_SIGNED_USAJRDNEMARAB1B8RTGB035.0R_USAJRDNFRYORTGB_P003_A002_HWp3_Service1FF
JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF
3.4.3_11-Stock.UKTmobile_BLUR
but no results!
don't worry about it, dude.
maybe you can try the way followed:
1.power off your defy;
2.remove the battery from the phone;
3.plug the usb cable into the phone without battery;
4.open RSD and chose one of the roms your listed, but 3.4.2-177-005 NORDIC prefered,
5.take the battery into your phone, now your can see the "connected" on RSD;
6.click the "start" button to flash;
7.wait the phone reboot completely, usually it'll reboot.
if not reboot, remove and on your battery, power on your phone, then press the "volume - and power" botton together, you can enter the robot screen, press volume up and down botton together, usually you can enter the recovery, then chose wipe 3 and 4, totally you can save your defy~~
Be sure to have enough battery while flashing..
Get the phone into bootloader (hold volume down when switch on) and flash an SBF like one from the list you've attached using RSD lite. Surely you have used RSD Lite before?
It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.
jdearauj said:
It seems you have the same issue I have on my Defy as per this thread: http://forum.xda-developers.com/showthread.php?t=1095444
I’m also unable to get into recovery or get to the Android Robot screen using “Power + Volume Down”. Hopefully we will be able to figure it out and get this issue fixed.
Click to expand...
Click to collapse
This same friend, I have the same problem, is this a hardware problem? I move the roms but not normal
Vol I login recovery - + Power key
http://forum.xda-developers.com/showthread.php?t=966537
Try flashing nordic, if fails arabic, if fails, 2.3.3, if fails probably corrupt nand broken hardware.
Before and after every flash always try to access recovery (volume down) and WIPE. reboot and wait crossing fingers, if it fails to boot flash next sbf, try to go recovery + wipe; reboot, cross more fingers; if fails to boot try next sbf and repeat.
The reason for this is that you can flash a lower version but it wont boot, so you have to flash a higher and higher version until you get one that works.
I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!
zyxwvut said:
I tried to help someone with this problem before to no avail!
Everyone who is saying just wipe in recovery, or just flash with RSD blah blah blah, need to understand that he CAN NOT access recovery and HE HAS flashed multiple roms using RSD 4.9, read the OP. Im convinced this is physical hardware failure or similar. We all know the drill to recover our precious defy's in the event of semi-brick ie: bootloop or corrupt code. However this is more than a semi-brick. We are talking about successful flashing and still no access to recovery and infinite M logo!
I walked more than one person with this problem through every known procedure to bring these phones back. Even using sbf_flash for linux doesn't work as this is the only way I flash anymore I don't bother with RSD anymore. The thing is it DOES FLASH SUCCESSFULLY just no recovery or boot!
Click to expand...
Click to collapse
OMG Exactly!!!! i have same problem and nobody seems to be able to tell me what to do, they keep saying same thing about trying various SBF's and Vol down + power method. No matter what SBF file I successfully flash with, i cannot get into boot recovery mode.
I have heard before from desperate users that they were able to revive their phone by flashing a full 2.3.4 sbf. This however comes with downsides of not being able to downgrade to froyo by flashing ANY froyo sbf's. There is a way to downgrade back to froyo but its a dirty method. Even after downgrade you can't just flash a sbf, you will always need to restore nandroid and flash fixed sbf
hi guys..i have messed up my defy...i successfully did cm7 rom in my defy 10 days back....it was working fine... .yesterday it got switched off automatically when i turned off my PC.(i had connected internet to PC via defy Bluetooth)...after that ..when ever i switch on my phone , it will will be alive for few mins ..and then it got switched off automatically(despite many reboots) then i re-installed cm7...from boot loader....it was going fine...
i installed int defy in cm7....and my phone doesn't cross the boot menu(sadly later i came to know that 2int shouldn't be installed in cm7 as it already there)...then i uninstalled bootloader(as i thought it would take me back to cm7) ...i did this big mistake...
then i saw post of sbf flash Thur rdslite as solution for it... and i did it...
the extracting procedure was going fine...then came "phone rebooting" in pc(in rdslite).......then came "manually power up the phone"...but my phone is struck at android logo...and i can't power on...
pls guys tell me a solution... is it a RAM problem or i did wrong rdslite flashing ?.....now my struck at android logo!!!! ( no 2int bootloader ...as i stupidly uninstalled it)
umeshkrish said:
hi guys..i have messed up my defy...i successfully did cm7 rom in my defy 10 days back....it was working fine... .yesterday it got switched off automatically when i turned off my PC.(i had connected internet to PC via defy Bluetooth)...after that ..when ever i switch on my phone , it will will be alive for few mins ..and then it got switched off automatically(despite many reboots) then i re-installed cm7...from boot loader....it was going fine...
i installed int defy in cm7....and my phone doesn't cross the boot menu(sadly later i came to know that 2int shouldn't be installed in cm7 as it already there)...then i uninstalled bootloader(as i thought it would take me back to cm7) ...i did this big mistake...
then i saw post of sbf flash Thur rdslite as solution for it... and i did it...
the extracting procedure was going fine...then came "phone rebooting" in pc(in rdslite).......then came "manually power up the phone"...but my phone is struck at android logo...and i can't power on...
pls guys tell me a solution... is it a RAM problem or i did wrong rdslite flashing ?.....now my struck at android logo!!!! ( no 2int bootloader ...as i stupidly uninstalled it)
Click to expand...
Click to collapse
flashing thr rsdlite might be the major cause
umeshkrish said:
hi guys..i have messed up my defy...i successfully did cm7 rom in my defy 10 days back....it was working fine... .yesterday it got switched off automatically when i turned off my PC.(i had connected internet to PC via defy Bluetooth)...after that ..when ever i switch on my phone , it will will be alive for few mins ..and then it got switched off automatically(despite many reboots) then i re-installed cm7...from boot loader....it was going fine...
i installed int defy in cm7....and my phone doesn't cross the boot menu(sadly later i came to know that 2int shouldn't be installed in cm7 as it already there)...then i uninstalled bootloader(as i thought it would take me back to cm7) ...i did this big mistake...
then i saw post of sbf flash Thur rdslite as solution for it... and i did it...
the extracting procedure was going fine...then came "phone rebooting" in pc(in rdslite).......then came "manually power up the phone"...but my phone is struck at android logo...and i can't power on...
pls guys tell me a solution... is it a RAM problem or i did wrong rdslite flashing ?.....now my struck at android logo!!!! ( no 2int bootloader ...as i stupidly uninstalled it)
Click to expand...
Click to collapse
Go to stock recovery. Turn off your phone and power it on with holding Power button + Vol Down (Vol-) until you see triangle logo. Then release it and press Vol+ and Vol- buttons in the same time.
Wipe cache and you`re good to go.
thanks... my defy s back
Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.
1st don't loose your battery - when no working system on the device then it is not being charged
You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
What ROM u had before flashing CM7?
Is it defy or defy+?
And you flashed CG5 sbf
When you give more details maybe I can propose proper solution.
You wrote nothing about wipes - have u performed them? If not try to get into any recovery and wipe user data / factory reset, try vol- w/power or vol + & - together, take a battery for some time before doing it etc.
Click to expand...
Click to collapse
If I understood right, OP's DEFY is completely bricked and he cannot even access recovery.
Anyway, I unfortunately no solution to propose as I have a DEFY in the same situtation and I'm currently unable to revive it. We aren't the only who had DEFY bricked like this and some managed to have it wake up by flashing certain sbf.
You can try searching "bricked defy" on XDA and see what sbf the topic creator used to save his DEFY, if he succeeded to.
dont flash sbf just after the bootloop..!
-JFK- said:
Hi all,
I have a friend's Defy from a French carrier and my friend is with another carrier so I decide to SIM unlock it by installing CM7 and other files.
So I have root it and install the recovery.
In recovery, I have flash CM7 and Gapps.
But I get a boot loop...
So I decided to flash JORDN_U3_97.21.51 SBF and restart from scratch.
But now, the phone wont boot at all.
Nothing on the screen but it's still reconized by RSD (even if nothing is displayed on the screen) I can re-flash SBF files and RSD say "PASS" but doesn't reboot the phone.
So now I have a brick and can't boot vol up + power doesn't display anything.
Dose anyone have an idea for me ?
Thank you.
Click to expand...
Click to collapse
frend i wanna tell u onething.the very first time i did the flashing of cm7.1stable on froyo 2.2.2defy i got a bootloop..since i was in hostel i cudnt afford internet..so i was soo scared and even waited for 15 min..but the cm7 logo with an arrow swirling around didnt stop..i puld the batery out and again inserted and did something stupid like clearing data and got the condition worse
then i flashed sbf using rsd lite ..again rooted and flashed cm7.1 stable and got bootloop..this time i surfed net and found what shud hav been done ..
1)pull out the battery after the boootloop.
2)clear cache
3)reboot
tats it..the welcome window comes in no time..
so coming to the present issue, after flashing the smf did u get bootanimation with light passing over "android" againg and again ??
Check that u r using the latest RSD.
I have a Defy plus but the same thing happened to me before (black screen even no boot with vol up) so I connected my phone to the computer (I can't really remember if I powered with a vol up or not) but I got it recognized by the RSD. try connecting and powering on the the vol up if nothing just connect and see what will happen.
The most important thing is to use the latest version of RSD.
and please tell me if it worked.
I'm not responsible for anything.
Original message
:I need some serious help.
I tryed to flash custom 2.3.6 fixed sbf.
which didnt end well, after powerup i would go straight to bootloader with err codes.
so tryed to flash another stock SBF, that ended me in inifinte bootloop with android logo. after 20 minutes in bootloop i gave up and flashed another stock SBF this time it was cellcom israel sbf, it finished the flashing succesfully but now the phone wont powerup at all. not bootloader not recovey.
nada...
I really need your help here, any kind of insights will help. please this is urgent.
BTW: this is a red lense defy, last rom was JB 4.1.1 quarx 30.07 build.
the sbf was supposed to have the same rom.
update 1: managed to finally flash stock, cant enable 3g. phone is still rooted, installing superuser is succesfuly but doesnt control attributes. so 2ndinit currently does not work,
issue solved
Click to expand...
Click to collapse
UPDATE 16/11/2012: links check and updated everything should work.
Solution:
1. first get these files as we'll need all of them: Rsd lite (download and install that),
Motorola drivers (download and install: Here)
JORDN_U3_97.21.51.rar(contains sbf file): http://www.4shared.com/get/xzT3dMXv/JORDN_U3_972151.html
firmware.rar(contains another sbf file): http://www.4shared.com/rar/Ytt5O6--/firmware.html
2ndinit 1.4.2, and 2ndinit 2.3 (can be found here: http://forum.xda-developers.com/showthread.php?t=1032212).
also need the nandroid backup: http://www.4shared.com/file/pVQfB4bF/2011-06-11141427.html
[Optional]
superuser.zip file installing from recovery: http://downloads.androidsu.com/superuser/Superuser-3.2-arm-signed.zip
2. [Optional] I didn't have a router at my house and no signal at my phone and i needed internet for 2ndinit, so i installed a program that turns my wifi on the computer into a hotspot, it can be found here: http://www.connectify.me/
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
5. after installing Rsd lite, launch it, extract the JORDN_U3_97.21.51.rar and firmware.rar files into root directory (C:\ or D:\ or whatever).
in rsdlite press the
...
Click to expand...
Click to collapse
button and choose the JORDN_U3_97.21.51.sbf file.
connect your phone via a usb cable to your computer, the phone should state its connected. and you should see on the rsdlite window that a device is connected, click on it and press the button :"start".
let it finish and boot on itself (it should do that).
6. [Optional] if you started with low battery now is a good time to charge your phone.
7. transfer the 2ndinit 1.4.2 apk and the 2ndinit 2.3 apk into a folder in your sd card (name it "A" for ease of use).
also extract the 2011-06-11.14.14.27.zip into this folder on your sd card "/clockworkmod/backup/"
8. extract the superoneclick on your computer and launch it, while the phone is connected (should also be in usb debugging mode), press the root button in the superoneclick window and watch the magic, make sure you also install busybox (should be installed automatically when pressing the ROOT button).
9. disconnect your phone, use the file explorer provided with this rom and make sure you check with a "V" to "allow 3rd party apps" in the settings. install the 2ndinit1.4.2.apk file.
open the app after installation and make sure you have internet connectivity, press the install bootmenu option.(now pop-ups should appear regarding permissions, choose "allow" for all of them).
after the green led has turned on, go to settings menu under application/development and turn off the "usb debugging mode".
10. restart your phone and make sure you press the vol down button when the led turns blue during the bootup.
when in bootmenu, choose recovery-> custom recovery.
when in recovery, choose "wipe data/factory reset", "wipe cache", "advanced-> wipe dalvik".
now return to recovery menu and choose "backup/restore"->"restore->2011-06-11.14.14.27".
this should take a couple of minutes.
when its done, go back again to recovery menu, and choose again "wipe cache", "advanced-> wipe dalvik".
power off the phone.
11. hold the vol up button once again and power up the phone to go into bootloader screen.
connect your phone once again to your computer and on the rsdlite window choose the "firmware.sbf" file.
press start and flash it.
12. let the phone boot up, congrats you just revived your phone, root it once again using super one click (if needed), install the 2ndinit2.3.apk.
transfer whatever rom you like (dont try sbf's cause that's how I first got in this mess), reboot phone, go into stock recovery and install that zip after wiping data/factory reset. and ohh well you know the rest.
Good luck.
P.S if you can't or dont know where to find the files take a quick search in the forums and youll find most of them.
Reserved
reserved
when i flash firmware.sbs it takes me back to Android Bootmenu when it reboots please help. thanks
Shouldnt happen, make sure you Wipe Data, and cache, before the nandroid backup and after the nandroid backup.
only then u can flash the firmware.sbf
if the bootmenu still comes up simply choose "Boot-> set default-> normal". and reboot.
if still comes back to bootmenu (and i hope you are talking about bootmenu and not bootloader). install through custom recovery your favorite ROM and don't forget the corresponding Kernel.
good luck!
Is that work with bl7 ???
I've been trying to restore my phone for weeks, up until this thread, I started to think the internet couldn't help me. You are a god amongst men.
OK, banging my head against a wall here; I have 2 defy's. Mine has been to a war zone 4 times, I've replaced the screen (and the waterproof gasket) once, It's broken (the case) but still works except for the fact that the last time I had to flash an sbf I messed up the charging ability with the "macguyver" method.
Now I recently got a pristine looking red lens defy from a friend who said it wasn't booting...It "tried" but never stayed booted long. I tried immediately flashing one of the fixed sbf's with CM10 on it, and ever since I get the bootloader 09.10 code corrupt message.
I've tried the method listed here (by the way the first firmware in OP won't download for me, something about violating some terms of agreement?) the one labeled simply "firmware" downloaded.
Still no joy. Every flash I get all the way through code group 32 checksums match. Everything after that fails. Have tried multiple CEE, Nordic, Chinese, even Defy+ sbf (the new defy has red lens) with no luck.
Likewise when I tried flashing via linux (sbf_flash). The other night after battery out for quite awhile it led me to believe it had started working, and allowed me to get into recovery and wipe everything, but it was all false hope. It still did not boot (motorola M boot loop) and likewise, it still did not flash.
Anyone have any ideas how I can proceed to fix this thing?
I thought I had this thing figured out but obviously I was mistaken.
thanks in advance
I just unbricked my phone again yesterday after trying the latest cm10 sbf with no luck, so i can guarantee this method still works, however the firmware.sbf file is really needed and also the nandroid backup, so here's what i'll do:
1. i'll check what links are broken and reupload the necassery files.
2. I'll clean the the first message and update the links
so check back in about an hour
Thanks a lot for posting this. Tried to restore my phone using lot of other posts since the last 3 to 4 days days, but all in vain.
Was anybody able to install CM10 over this? After the installation, the phone is going into boot loop.
Thanks rtk217 for starting this guide very useful for noobs...
I've made some video tutorials using a few of the guides in the forums here...
hope it helps someone...
Its a complete step by step.
Part 1 of 4. This part deals with preparation of all the required files to successfully complete the custom rom installation.
http://youtu.be/jMAlys2_KG4
Part 2 of 4. How to restore Defy to default
http://youtu.be/6SUysKZ2E5Y
Part 3 of 4. How to root using SuperOneClick and install clockworkmod.
http://youtu.be/hd3_SRbkUWw
Part 4 of 4. How to install 2ndinit recovery and install CyanogenMod 10 Jelly Bean 4.1.2
http://youtu.be/gNPacGesWOI
I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
k.manojraja said:
I am still not able to install CM10. I had bricked my phone a week ago, so I followed this post using the below steps:
1. Flashed with JORDN_U3_97.21.51.sbf.
2. Installed 1.4.2 Sndinit..
3. restored the nandroid backup 2011-06-11.14.14.27
I am able to restore Froyo...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Have you got a Defy or Defy+ as you are trying to install the cm10 zip for MB526 (Defy+)
I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526
k.manojraja said:
...
Now I am trying to install CM10 using the following steps:
1. Install 2.3 Sndinit
2. do a full wipe
3. install CM10-20121205-NIGHTLY-mb526.zip
4. Install Defy-Gapps-CM10-20121109-without-Voice.zip
once rebooted moto logo appears.. the LED turns red and again tries to reboot.. again reboots to moto logo and the same thing happens!
Can somebody help me?
Click to expand...
Click to collapse
Why are you using 2ndInit 2.3???
All the guides and FAQs will tell you to use 2ndInit 1.4.2
hey i have the same problem did you fix it?
k.manojraja said:
I have a defy mb525.. The one i tried to install is a 2nd boot build that is common for both mb525 and mb526
Click to expand...
Click to collapse
hey i have the same problem did you fix it?
Thanks ...
Hay, Ur are a genie to me.. I tried so many mods after my imei no is gone. Wifi not working, issues with signal catching.. Now with your step by step guide i was able to overcome all of those... Thank you very much.
cmcooper123 said:
hey i have the same problem did you fix it?
Click to expand...
Click to collapse
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...
k.manojraja said:
Yep... Please see the thread http://forum.xda-developers.com/showthread.php?t=1618718&page=32
Look at pages 31 and 32...
Click to expand...
Click to collapse
but if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
cmcooper123 said:
but if i flash defy plus firmware on a defy mb525 wont that brick it?
Click to expand...
Click to collapse
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH
cmcooper123 said:
bwithut if i flash defy plus firmware on a defy mb525 wont that brick it?
---------- Post added at 12:05 PM ---------- Previous post was at 11:24 AM ----------
lol my bad it did brick it kind of
flashed DEFYPLUS_U3_4.5.1-134_DFP-137_ND_SIGN_SIGNED_UCADEFYEMARAB1B80AA004.0R_PDS03C_USAJRDNGIBRRTNORD_P009_A011_HWp3_Service1FF
then JORDN_U3_97.21.51.sbf
now it has a black screen but in boot loader mode sigh
any way this is were i am at:
http://forum.xda-developers.com/showthread.php?t=2032711
SIGH
Click to expand...
Click to collapse
I am really not sure if you have read the posts properly. I had no problems in flashing the defy plus sbf. The defy plus sbf that I gave you was a bl6 version and you can never downgrade to froyo.
97.21.51 is a Chinese éclair with bl5. 2nd boot builds were not working on bl5.