Related
Hi All,
Currently released version of Samsung Omnia i900 does not support UMTS 850/1900, which are north american 3G frequencies, according to official Samsung documentation, as well as FCC approval docs. However it has been recently established the radio chip does support those frequencies, and they are locked in the firmware only. Here is the evidence to support this claim:
This is the official FCC documentation for i900 certification:
https://fjallfoss.fcc.gov/oetcf/eas...me=N&application_id=476604&fcc_id='A3LSGHI900
On the page 4 of the "Internal Photos" document you can clearly identify the radio chip - it's Qualcomm RTR6285 and according to Qualcomm:
"Support for Eight UMTS Bands, Four EGPRS Bands, Triple-Band Receive Diversity and GPS Integrated into Power-Optimized RTR6285 Device": http://www.qualcomm.com/news/releases/2006/060213_worlds_first_single.html
So, it's only as matter of unlocking those frequencies in the current firmware. Samsung made our job a little easier, by recently making a public release of new ROM with updated firmware, so we won't have to dump it ourselves: http://www.samsungmobile.com/promotion/omnia/sg/sub02_xp.jsp#
I have limited free time and limited experience with reversing PDA firmware, to be able to achieve this by myself - please help.
I just got an Omnia and sometimes it hits the 3g network so i am sure that the firmware is there but it is locked.
PHONEGEEKUS said:
I just got an Omnia and sometimes it hits the 3g network so i am sure that the firmware is there but it is locked.
Click to expand...
Click to collapse
more details please - where are you at? what network/carrier do you mean? do you really see 3G icon and experience fast browsing/download? what is the firmware version on your Omnia? (Settings -> System ->Version)
AT&T.I have it from Singapore.PDA:i900DXHH3/DZHH3.As i mentioned it hits 3g for a minute or so and then it goes back to edge
man i sure hope this issue gets fixed!
AllTheWay said:
a US model for the Samsung Omnia is coming to the US in October via AT&T. Look for the Samsung Mirage.
Click to expand...
Click to collapse
AllTheWay I started this thread to solve the problem for people in US,who already have Singapore/European Omnia, the i900. It's a well known fact Mirage hits AT&T on October 21st, but it doesn't help us one bit. Unless of course, you're willing to dump the ROM from i907, reverse it and replace the i900's radio with the one from i907 with all supported UMTS frequencies unlocked
I wish somebody could help us out on this issue, I dont know enough about rom editing to be of use ;(
besides, i think the 907 is already available but not branded to at&t: http://www.celluloco.com/samsung-i907-omnia-8gb-us-3g-support-version-hsdpa850-1900-e-pr-1873.html
any update of this thread?
HTC Diamond users with US 3G - please help
I'm starting to believe it might actually be possible to tweak existing radio firmware to unlock UMTS 850/1900Mhz bands using already embedded secret debug menu from Samsung developers, rather than having to dump it, reverse it, patch and flash back. Here is the secret code to access Root Debug Menu on Omnia: *#197328640#
Option #4 "UMTS rf nv" has sub-option "umts rf nv write", which I think allows to modify the active UMTS bands in the radio. Assuming we have that set correctly, option #9 "Common" from the same Root Debug Menu has sub-option #5 "WCDMA Set Channel", which allows to specify downlink channel range.
Here is my idea: some devices, such as HTC Diamond with US 3G enabled radio, have the same Qualcomm chip as Omnia, and run the same WM 6.1 OS. So,
I'm thinking it's worth a shot if someone with US enabled HTC Diamond provided us with settings from his device for those 2 configurable menus I just mentioned. If you backup your own settings, so you could restore them if it doesn't work - I think trying settings from another device will not fry the radio, worst case scenario transceiver will just shut down and be offline until settings are restored.
This would be great.... Iv'e been dieing to get 3g in the usa with the omnia.... Can anyone help with this?
Any updates on this? Would be nice. Especially now since we know omnia isn't coming to ATT as i907
If possible i will donate to the guy that dicover how to enable!
It may be easier to copy the setting from an I907 Epix. That has almost identical hardware and it is ATT + Samsung + Tri Band UMTS.
When I try writing the WCDMA channel it says "That value is wrong".
Also, I can only set one number, so I assume that they want me to set one in the listed range which is WCDMA2100.
Here are the bands:
http://en.wikipedia.org/wiki/UMTS_frequency_bands
Oddly, the Channels currently set stretch a few beyond the range cited on Wiki for WCDMA 2100. They start on the same channel.
Another oddity is that there is no uplink channel. I suppose that people just use Edge for this? Does the I907 do HSUPA?
well...
i'm living in ISRAEL,
and we have GSM network but we also have another cellular company that work with "UMTS 2100/850" band..
i'm working well on 3G with the 2100 band (my onmina have only UMTS/WCDMA 2100 only without 850 also..)
i will be happy to open if it's possible the UMTS/WCDMA 850 also.. so i'll have both 2100 + 850 on WCDM/UMTS (not GSM) freq...
but i'm not shure it's possible to open what ever you like.. anyway i'll try to ask our guys (at my cellular company i'm working at) about this freq stuff...
hope this thread will bring us good information..
also, just know.. my job is with Cellular phones.. and we have "for Testing" Omnia phone with WCDMA/UMTS 2100/850 bands..
but i don't know how i can download the firmware to my pc and try to use it on my omnia back...
if anyone know how i can "take-out" the firmware explane to me and i'll try to do it....
..
Someone else has further evidence:
http://www.modaco.com/content/i900-...6374/open-omnia-umts-wcdma-850-900-1900-2100/
OK guys,
i had this omnia in my hands..
the Version says
PDA: i900LJJHK1/JJHK1
PHONE: i900LJJHK1
as i think.. it's diffrent model.. I900L this "L" model.. not like ours phones... (i think, it's looks exactly the same!)
i don't think the ROM will chane the bands anyway..
anyway as you asked me to do.. when i'm doing the *#2263# code
i'm getting diffrent menu then our Omnias..
i'm getting 3 options that one of them it's "WCDMA Band Select" and in there you have ALL the UMTS bands and there is "Automatic" option.. what says this phone open to all kind of UMTS networks............ (including GSM also..)
..
jakeordie said:
juvaknin, you posted this on Modaco as "PHONE: i900JJHK1" without the L. Please let us know which one it was. Thanks!
Click to expand...
Click to collapse
yes, it was suppose to be with "L" mabe i forgot it on Modaco forum
anyway i hope this is only Rom issue... but anyway i can't "Rip" the rom right now.. because this phone is 24/7 testing time and i can't "make it gone" from the test station to drop the rom to my PC
i hope there are more guys who have this I900L to share the rom with us..
anyway you remmeber the code that you can change the phone settings buy country?
the main code is (type it from the dailer) *#1546792*#
and the password for section "2 - Preconfiguration" is *#81230*#
it's looks like if we will have the code for the "Internal" section, mabe we will find something in there ?!?!
if we will change to another country.. like Austrlia or something.. the bands will change also? what you guys think?
Hi juvaknin I was reading on web that this i900L is for latinamerica and its frequency was
Cellularhone
Cellular_Networks: GSM850, GSM900, GSM1800, GSM1900, UMTS850, UMTS1900
Cellular-Data;Links: CSD, GPRS, EDGE, UMTS, HSDPA
found this at hxxp://www.pdadb.net/index.php?m=specs&id=1446
change the xx for tt. Also wher did you buy this phone this info is real ?
juvaknin said:
OK guys,
i had this omnia in my hands..
the Version says
PDA: i900LJJHK1/JJHK1
PHONE: i900LJJHK1
as i think.. it's diffrent model.. I900L this "L" model.. not like ours phones... (i think, it's looks exactly the same!)
i don't think the ROM will chane the bands anyway..
anyway as you asked me to do.. when i'm doing the *#2263# code
i'm getting diffrent menu then our Omnias..
i'm getting 3 options that one of them it's "WCDMA Band Select" and in there you have ALL the UMTS bands and there is "Automatic" option.. what says this phone open to all kind of UMTS networks............ (including GSM also..)
Click to expand...
Click to collapse
I have an unlocked Defy from T-Mobile USA that I'm using with my AT&T service, but I'm only getting EDGE wherever I go, no UMTS at all, and I've even heard of people getting it to run on HSPA bands. I know already that HSPA is available everywhere from my home to my workplace, thanks to my Atrix 4G. I've rooted the Defy and it's running Cyanogenmod 7 latest. Any help would be greatly appreciated, as I can find nothing on this forum or on Google to remedy the issue.
You should try to change the freq via baseband switcher.And restart.
Maybe you got the "2g only" checked in networks settings..uncheck that.
Settings >Wireless & networks > Mobile networks
You can also put automatic(2G and 3G) mode in GSM/UMTS network preferences.
Thanks for the reply Viper. I just noticed the baseband is set to some central Europe nonsense. Should I change it to one of the T-Mobile USA band settings? There's nothing there for AT&T.
Edit: I changed the baseband to US T-Mobile 3.Something, whichever was latest. 2G only was not checked. I'm still getting 2G only. Could it be my APN settings? Could I copy the APNs from my Atrix?
I'm having a problem with my AT&T connection as well, but I've been using my phone unlocked on the network since March with no problem. I'm new to modding, but OCD about streamlining my electronics. My friend suggested rooting my device and flashing a new ROM. I decided on stock Nordic Froyo, and it makes me so happy not to see all the T-mobile crap in my apps tray.
BUT the collateral damage is not so hot. I have no 3g or even 2g connection anymore. I tried the fix in this thread http://forum.xda-developers.com/showthread.php?t=944258 and was able to get a signal with 4 bars instead of the previous state of emergency calls only, but no letters like E or 3g and no ability to use the internet/transfer data. I also installed the broadband switcher in this thread http://forum.xda-developers.com/showthread.php?t=1052745 and tried all of the T-mobile US bands. No luck. I did rest the APN to default. No change. I've been using wifi, but will have to go back to work soon. Not having access to the smart part of my smartphone will feel sort of like having an arm cut off.
I'm not sure what to do next. I could try flashing another ROM, but from what I've read in the forums, that's no guarantee.
If anyone has any suggestions to help a noob, I'd be forever grateful.
Thanks in advance!
Thanks for the link, halah. Do I apply this as an update.zip from recovery? Or install?
Never mind, it won't work for me, for whatever reason.
Hi everybody, I've been using CM10.1 build of July 3rd since it came out, with overall good satisfaction.
One major issue bothers me and I would like to get rid of it: when I enter a bad 3G reception area, my Defy+ disconnects from the 3g network, and it stays disconnected even if I move back to a good reception site, because it prompts for the SIM PIN and obviously I'm not watching the screen every second.
I dont think this is normal. It should retain the PIN entered at power-on, and restore 3G connectivity as network becomes available again.
I'm on italian TRE network operator, which has commercial agreements with competitors in order to fall back to nationwide roaming in areas where it is not present. Also, it only operates 3G frequencies, while when in roaming the phone should lock into 3G and 2G as well. Maybe this piece of information can help you in helping me.
I'm on mixed GSM/WCDA mixed mode (WCDMA preferred).
I tried to search in other thread but couldn't narrow down an exact asnwer, most of the topics I read dealt with RIL BUG (?).
Thanks
manualle said:
Hi everybody, I've been using CM10.1 build of July 3rd since it came out, with overall good satisfaction.
One major issue bothers me and I would like to get rid of it: when I enter a bad 3G reception area, my Defy+ disconnects from the 3g network, and it stays disconnected even if I move back to a good reception site, because it prompts for the SIM PIN and obviously I'm not watching the screen every second.
I dont think this is normal. It should retain the PIN entered at power-on, and restore 3G connectivity as network becomes available again.
I'm on italian TRE network operator, which has commercial agreements with competitors in order to fall back to nationwide roaming in areas where it is not present. Also, it only operates 3G frequencies, while when in roaming the phone should lock into 3G and 2G as well. Maybe this piece of information can help you in helping me.
I'm on mixed GSM/WCDA mixed mode (WCDMA preferred).
I tried to search in other thread but couldn't narrow down an exact asnwer, most of the topics I read dealt with RIL BUG (?).
Thanks
Click to expand...
Click to collapse
same problem for me
atma_weapon said:
same problem for me
Click to expand...
Click to collapse
What build are you on?
Hello,
I have been using my Meizu MX5 for about two months now without the 4G network working. I have recently updated to the latest firmware and I am currently running Flyme OS 4.5.2.7A and that has not solved any issues either.
I have checked that the phone settings are configured properly.
Network Mode is set to "4G First".
The phone is pending between, H-, H and H+ connection (3G I believe?)
I have checked with my provider and these are the following frequencies which should be providing 4G in my country (Sweden) for the provider:
800Mhz, 900MHz, 1800MHz, 2600MHz
Other providers have the same frequencies as well.
I have also gotten two new SIM-Cards during this period of time without it solving any issues. I have tried the SIM cards in some other phones and they get 4G connection without any issues.
I have been in contact with Meizu customer support in China and after some random troubleshooting of factory resetting and reinstalling the same firmware on the phone without solving anything.
They have also provided me information regarding the different bands/frequencies which the phone operates on:
GSM/GPRS/EDGE (900/1800/1900MHz)
WCDMA/HSPA+: Band 1/2/8 (900/2100MHz)
FDD LTE: Band 1/3 (1800/2100MHz)
TD-SCDMA: Band 34/39 (no freqency specified)
TD-LTE: Band 38/39/40/41 (no frequency specified)
I am not 100% sure on how this works but according to the information I am given, the phone and my provider share at least one frequency for the 4G network and therefore I do not understand why it is not working.
I am sure that it is software related and thus I won't send my phone back to China (4-8 weeks delivery time and all expenses has to be paid by me) for them to troubleshoot.
Anyone here who has knowledge which could give me an answer?
Kind regards,
Martin
Hi mate.
I had this problem but upgraded to new firmware late last night and it came on. Thankfully!
Give it a try
Hi,
I have checked the upgrade app on the phone and it says I have the latest firmware.
Which firmware version are you running?
Kind regards,
Martin
Maybe it is an APN related problem. Look if you have the same data as in the other phones that 4G works
iicc said:
Maybe it is an APN related problem. Look if you have the same data as in the other phones that 4G works
Click to expand...
Click to collapse
Hi iicc,
Thank you for the reply.
I have checked the APN settings about four-five times and I can't find any inconsistencies. I have even crosschecked it with a support technician from my provider.
The only things I can think of is either my anntenna being gimped, that the firmware is not properly developed or that somehow there's trash in my system and that my phone maybe needs a complete wipe and reinstallation.
After the upgrade to firmware 4.5.2.7A the phone does not even hint on trying to connect to 4G. Pre-upgrade it atleast connected to 4G for about 5 seconds and then went down to 3G.
Kind regards,
Martin
hawdes said:
Hi iicc,
Thank you for the reply.
I have checked the APN settings about four-five times and I can't find any inconsistencies. I have even crosschecked it with a support technician from my provider.
The only things I can think of is either my anntenna being gimped, that the firmware is not properly developed or that somehow there's trash in my system and that my phone maybe needs a complete wipe and reinstallation.
After the upgrade to firmware 4.5.2.7A the phone does not even hint on trying to connect to 4G. Pre-upgrade it atleast connected to 4G for about 5 seconds and then went down to 3G.
Kind regards,
Martin
Click to expand...
Click to collapse
And have you tried to factory data reset the phone?
hawdes said:
Hello,
I have been using my Meizu MX5 for about two months now without the 4G network working. I have recently updated to the latest firmware and I am currently running Flyme OS 4.5.2.7A and that has not solved any issues either.
I have checked that the phone settings are configured properly.
Network Mode is set to "4G First".
The phone is pending between, H-, H and H+ connection (3G I believe?)
I have checked with my provider and these are the following frequencies which should be providing 4G in my country (Sweden) for the provider:
800Mhz, 900MHz, 1800MHz, 2600MHz
Other providers have the same frequencies as well.
I have also gotten two new SIM-Cards during this period of time without it solving any issues. I have tried the SIM cards in some other phones and they get 4G connection without any issues.
I have been in contact with Meizu customer support in China and after some random troubleshooting of factory resetting and reinstalling the same firmware on the phone without solving anything.
They have also provided me information regarding the different bands/frequencies which the phone operates on:
GSM/GPRS/EDGE (900/1800/1900MHz)
WCDMA/HSPA+: Band 1/2/8 (900/2100MHz)
FDD LTE: Band 1/3 (1800/2100MHz)
TD-SCDMA: Band 34/39 (no freqency specified)
TD-LTE: Band 38/39/40/41 (no frequency specified)
I am not 100% sure on how this works but according to the information I am given, the phone and my provider share at least one frequency for the 4G network and therefore I do not understand why it is not working.
I am sure that it is software related and thus I won't send my phone back to China (4-8 weeks delivery time and all expenses has to be paid by me) for them to troubleshoot.
Anyone here who has knowledge which could give me an answer?
Kind regards,
Martin
Click to expand...
Click to collapse
Let me try to come up with something that might be your problem. If you are using 3 as your mobile provider then they use FDD-LTE band 7 & 20 none of which are supported by the MX5 and 3 are also using TDD-LTE band 38 which is supported by the MX5, but might not be available in your area.
If you are on Net4Mobility then they use FDD-LTE 3,7,8 & 20 of which only 3 is supported, so it could that in your area there is no coverage with band 3.
If you are on Telia, the story is pretty much the same as Net4Mobility as they use FDD-LTE 3,7 & 20.
In order to get more from your phone. You can open up google and search for 'meizifan eu' and go to the website. They have a pretty good description of how you install the international version of FlyMe on your MX5, the international version is called 4.5.2.7i. I believe it activates some other FDD-LTE and TDD-LTE bands.
1800Mhz band is a short range, higher bandwidth frequency which usually is less common and given that it has a short range it most likely isn't available in your area.
nasty_suicide said:
Let me try to come up with something that might be your problem. If you are using 3 as your mobile provider then they use FDD-LTE band 7 & 20 none of which are supported by the MX5 and 3 are also using TDD-LTE band 38 which is supported by the MX5, but might not be available in your area.
If you are on Net4Mobility then they use FDD-LTE 3,7,8 & 20 of which only 3 is supported, so it could that in your area there is no coverage with band 3.
If you are on Telia, the story is pretty much the same as Net4Mobility as they use FDD-LTE 3,7 & 20.
In order to get more from your phone. You can open up google and search for 'meizifan eu' and go to the website. They have a pretty good description of how you install the international version of FlyMe on your MX5, the international version is called 4.5.2.7i. I believe it activates some other FDD-LTE and TDD-LTE bands.
Click to expand...
Click to collapse
Thank you for the reply nasty_suicide!
I am using Comviq Tele2 as provider, which should use the Telia net.
This is what I believe as well, but I really thought there was no way to flash the international version onto the phone and was about to abandon ship by buying a new phone yet again.
I will try to install the International version as soon as I have time to follow through the steps. I have found the guide on Meizufans.
Once I have installed the international version I'll let everyone know the outcome.
Kind regards,
Martin
Hi Hawdes,
I've exactly the same problem as you do, please post back once you instal I version. I was planning to do so but since I already have everything installed I didn't want to go through trouble for nothing.
What were the results of this? Is it true that firmware can affect the signal received?
upgraded to the latest firmware yet?
Samsung galaxy s7 4G problem
What about in Samsung galaxy s7 version of Flyme OS?? I cannot see 4G option.
Hi,
did anyone using Umi Super have any problems with using 4G at 800MHz? Im on giffgaff and even though Umi Super is supposed to work at 4G under 800MHz (thats what the specification states) i cant manage to make it work. I have perfect 4G coverage, 4G sim, 4G tariff, even gave my sim to a friend with S7 edge and it worked on his phone. Maybe new update will fix that? I tried with different sim from different operator (LYCA) and it works but 4G in LYCA is at 2100MHz so I didnt really check the 800. I tried everything and still nothing. Did anyone have similar problem?
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
It is a software bug and I think I sort it out after flashing the phone. For now I sorted out the problem using Networks app by Philipp Mangalov and switching network to LTE/GSM auto
Well it seems the data part of the UMI SUPER is not so super, is it? I face a similar problem but worse. The 4G band of 800 doesn't work(despite being advertized by UMI as supported) but luckily the band of 2100 works without any issues. The problem comes when I'm out of 2100 band coverage and phone must switch to 3G - then I lose all data connectivity completely. So basically whenever I'm out of 4G 2100 coverage(which is often) I am without any connectivity! Anyone facing the same? Solution?
Indopilot said:
Well it seems the data part of the UMI SUPER is not so super, is it? I face a similar problem but worse. The 4G band of 800 doesn't work(despite being advertized by UMI as supported) but luckily the band of 2100 works without any issues. The problem comes when I'm out of 2100 band coverage and phone must switch to 3G - then I lose all data connectivity completely. So basically whenever I'm out of 4G 2100 coverage(which is often) I am without any connectivity! Anyone facing the same? Solution?
Click to expand...
Click to collapse
I only have 3G and the phone shows that I have internet, but when I try to actually use the data it just says no connection on apps.
zbysogi said:
Hi,
did anyone using Umi Super have any problems with using 4G at 800MHz? Im on giffgaff and even though Umi Super is supposed to work at 4G under 800MHz (thats what the specification states) i cant manage to make it work. I have perfect 4G coverage, 4G sim, 4G tariff, even gave my sim to a friend with S7 edge and it worked on his phone. Maybe new update will fix that? I tried with different sim from different operator (LYCA) and it works but 4G in LYCA is at 2100MHz so I didnt really check the 800. I tried everything and still nothing. Did anyone have similar problem?
Click to expand...
Click to collapse
I don't have this issue at all. My UMi Super connects perfectly to my 4g network under 800MHz without an issue here in Uganda. You can install the MTK Engineering app from the play store and check the band compatibility on ur device and you can also set the mode using the same app under android settings.
You could also try updating to the latest OTA which is 20160810 or the one before it by downloading the files from forum post here and saving them to ur phone and updating manually if you don't have the current OTA
sachak said:
I don't have this issue at all. My UMi Super connects perfectly to my 4g network under 800MHz without an issue here in Uganda. You can install the MTK Engineering app from the play store and check the band compatibility on ur device and you can also set the mode using the same app under android settings.
You could also try updating to the latest OTA which is 20160810 or the one before it by downloading the files from forum post here and saving them to ur phone and updating manually if you don't have the current OTA
Click to expand...
Click to collapse
GravityBox is a perfect solution for this problem. You can set up an icon in notification bar allowing You to toggle between 2G/3G/4G
zbysogi said:
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
Click to expand...
Click to collapse
same problem
This is indeed a software issue, one I have come accross many times - using an app to toggle between the service types is the best workaround!
There are many apps that work to resolve this, some great ones have already been mentioned.
TerryWebbs said:
This is indeed a software issue, one I have come accross many times - using an app to toggle between the service types is the best workaround!
There are many apps that work to resolve this, some great ones have already been mentioned.
Click to expand...
Click to collapse
Could you tell me some app that resolve this?
Thanks
I've got a UMI Super and had this issue as well:
try this app:
Network by Philipp Mangelow
https://play.google.com/store/apps/details?id=de.mangelow.network
4g Umi Super on Giff Gaff
You need Giff Gaff settings in access point name. If you try and use O2 4g it doesn't work even though Giff Gaff uses O2 network. Settings are really easy to input but MUST be Giff Gaff not O2.
zbysogi said:
I actually bought 2 phones of the same model so I decided to check if 4G worked on the other one and as I put the sim card in I just remembered something and realized same thing happened with my phone. When I put the SIM card in for the first time it DID automatically go to 4G, ok, when I looked for available networks it found O2 4G, granted BUT!!! when i got to "preferred network type" there is only 3G to pick, and THE MOMENT I PICK IT there is not possible to go back. Every network I find from that moment is only 2G or 3G. Now i reckon that a software problem right? See attachments
Click to expand...
Click to collapse
There is a fix on rooted phones by using GravityBox and switching between 2G/3G/4G
Thread can be closed.
4G on a Umi Super on GiffGaff.
zbysogi said:
There is a fix on rooted phones by using GravityBox and switching between 2G/3G/4G
Thread can be closed.
Click to expand...
Click to collapse
All that's needed is GiffGaff settings inputing manually. Very easy to do. O2 settings that the phone recognises when a GiffGaff sim is used WILL NOT WORK. The Network is O2 but the APN settings for GiffGaff are totally different.
All you guys that think you know what you're doing obviously don't.
No need to Root or use GravityBox or any other App.
Maz Jones said:
All that's needed is GiffGaff settings inputing manually. Very easy to do. O2 settings that the phone recognises when a GiffGaff sim is used WILL NOT WORK. The Network is O2 but the APN settings for GiffGaff are totally different.
All you guys that think you know what you're doing obviously don't.
No need to Root or use GravityBox or any other App.
Click to expand...
Click to collapse
Well said. I just shake my head in despair when I see how totally clueless people try to be teachers and Internet gurus with very limited knowledge about the task at hand. These comments should come with warning stickers.
For those who want to be able to switch between 3G/4G and LTE only, use this nifty little APK that I've attached below. It will allow you to enter engineer mode without using the dial code.
Hi
This is a bug implemented in Android 7.0.
I had the same.
1 Just force in your parameters 2G/3G networks
2 wait for network authentification (no more excalamtion mark)
3 go back to 4G
Every thing will be OK to next switch off or plane mode.
Rgds,
LTE band 7 (2600) not working
I recently received my new Umi Super and updated to the last firmware V7.01_20170413, everything works fine except for the 4G. I live in an area where band 7 (2600) is available but the phone can't connect to it. Of course, my preferred network type is set to 4G/3G/2G (auto).
I read a lot about the issue on the internet but I can't find a solution.
I checked the BandMode on the phone by dialing *#*#3646633#*#*, band 7 is included and checked. However, when I tried to remove the other LTE bands and keep only band 7, I got a message explaining that the list can't be empty ("Failed. The band is changed from not null to null, it is illegal"), though the list was not completely empty because band 7 was still selected.
Also, I tried to change the radio band by dialing *#*#4636#*#*, but process com.android.phone stopped working when I pressed "select radio band", even after I cleared cache in phone and sim apps.
Can anyone tell me how to fix the problem and get connected to 4G.
BTW, Network by Philipp Mangelow is not available anymore. Switching between 3G/2G and 4G/3G/2G settings doesn't fix the issue. I tried the giffgaff settings, but the APN gets deleted as soon as I try to save it.
Thanks
bemo00 said:
I recently received my new Umi Super and updated to the last firmware V7.01_20170413, everything works fine except for the 4G. I live in an area where band 7 (2600) is available but the phone can't connect to it. Of course, my preferred network type is set to 4G/3G/2G (auto).
I read a lot about the issue on the internet but I can't find a solution.
I checked the BandMode on the phone by dialing *#*#3646633#*#*, band 7 is included and checked. However, when I tried to remove the other LTE bands and keep only band 7, I got a message explaining that the list can't be empty ("Failed. The band is changed from not null to null, it is illegal"), though the list was not completely empty because band 7 was still selected.
Also, I tried to change the radio band by dialing *#*#4636#*#*, but process com.android.phone stopped working when I pressed "select radio band", even after I cleared cache in phone and sim apps.
Can anyone tell me how to fix the problem and get connected to 4G.
BTW, Network by Philipp Mangelow is not available anymore. Switching between 3G/2G and 4G/3G/2G settings doesn't fix the issue. I tried the giffgaff settings, but the APN gets deleted as soon as I try to save it.
Thanks
Click to expand...
Click to collapse
You may try to force 3G and then try to force 4G
You may try to user another IMEI number from a UMI device with 2600 support (of course backup/write down the original one before just in case)
http://www.ucc.co.ug/data/imei/2
After the update to Nougat 7.x how long does it take to do a full recharge?
Do you still have fast charge feature (< 1 hour) or do you lost it like all users reported so far?
What about your GPS? Do you have a fast fix after cleaning history and is it reliable (not losing signal often?).
SimurghXDA said:
You may try to force 3G and then try to force 4G
You may try to user another IMEI number from a UMI device with 2600 support (of course backup/write down the original one before just in case)
http://www.ucc.co.ug/data/imei/2
After the update to Nougat 7.x how long does it take to do a full recharge?
Do you still have fast charge feature (< 1 hour) or do you lost it like all users reported so far?
What about your GPS? Do you have a fast fix after cleaning history and is it reliable (not losing signal often?).
Click to expand...
Click to collapse
Is it safe to change the IMEI number? and where can I find another number for a UMI device?
GPS is working fine, it fixes pretty fast, but I'm not sure about interruption in the signal because I haven't used it enough yet