Built CM9 from source, please test !! - XPERIA X10 General

hello guys..
so i made my first build of CM9 from sources...
since i have a broken usb, i cannot flash cm9 kernel and test it...
so i request someone to please test and tell me if it works...
rom(v1)
rom(v2) (built this on my newly setup build machine)
kernel
please be informed that i downloaded cyanogenmod's latest source code and compiled from there...
i have made no changes (except the color bug fix)
all the work has been done by cm team, and freexperia team...
i am looking forward to build aokp for x10, so to just make sure that i can build a rom from source, i tried doing this
please report how it goes ??

The kernel looks suspiciously like wifi module. Do I use CM9#121 kernel?
It boots.

TAL333 said:
The kernel looks suspiciously like wifi module. Do I use CM9#121 kernel?
It boots.
Click to expand...
Click to collapse
fixed link now
... i'm sorry
P.S.
really relieved to know that it boots
now i can concentrate on aokp....
was pretty much a major achievement for me to compile a working rom from source... as i have no formal knowledge on programming and all that...

downloading now and will get back with edit after testing

championswimmer said:
fixed link now
... i'm sorry
P.S.
really relieved to know that it boots
now i can concentrate on aokp....
was pretty much a major achievement for me to compile a working rom from source... as i have no formal knowledge on programming and all that...
Click to expand...
Click to collapse
Yes, you did wonderfully well. Truly an Achievement. You should be proud of yourself........ But......
The Camera Doesn't Work......
---------- Post added at 03:22 AM ---------- Previous post was at 03:15 AM ----------
Apollo force closes from menu. Use widget and no more force closes . Every time screen turns off, upon any screen on event it reboots. Sleep issue?
I just set screen timeout to 10 minutes to check things out. Wifi, data, browser, fixing permissions; all work. Also, on screen off, it is not doing a full reboot as apps were upgrading and continued when it rebooted so it didn't lose the data signal. Great Job. Anxiously awaiting your AOKP release.

Going to test it too,i will give feedback after a day of usage.
thanks for your efforts.
@champ,mates
i was unable to use the rom,it was giving me FC's,i was just able to use the settings menu,i tried wiping cache,fixing perms,but nothing,i really want to test this,any suggestions? please.

kalel29 said:
Going to test it too,i will give feedback after a day of usage.
thanks for your efforts.
@champ,mates
i was unable to use the rom,it was giving me FC's,i was just able to use the settings menu,i tried wiping cache,fixing perms,but nothing,i really want to test this,any suggestions? please.
Click to expand...
Click to collapse
it boots fine for me dude...
just that when i close display it reboots... but otherwise its fine
Sent from my X10i using XDA

championswimmer said:
it boots fine for me dude...
just that when i close display it reboots... but otherwise its fine
Sent from my X10i using XDA
Click to expand...
Click to collapse
I just read in CM Discussion Room that FXP CM9#122 reboots every time screen turns off and the colors are still buggy. So, you did a great job of porting. And on yours the colors are fine. So, have you tried doing anything with the Camera files on CM9?

TAL333 said:
I just read in CM Discussion Room that FXP CM9#122 reboots every time screen turns off and the colors are still buggy. So, you did a great job of porting. And on yours the colors are fine. So, have you tried doing anything with the Camera files on CM9?
Click to expand...
Click to collapse
tried building from. sony's source...
the lib that i get works only on stock gb rom, not on cm roms...
the source needs to be worked upon....
maybe fxp can shed more light on it
Sent from my X10i using XDA

championswimmer said:
it boots fine for me dude...
just that when i close display it reboots... but otherwise its fine
Sent from my X10i using XDA
Click to expand...
Click to collapse
yes ,i had that too,it reboot when locking the phone,but i really dont know why i was not able to test an app,i will try later.
and yes in your port,colors are more accurate,and trasnsitions are nice,not too smooth,but they no have lag.

made another build..
want to know if it solves the reboot issue
http://icxperia.com/championswimmer/x10-semc-es209ra/cm_es209ra-ota-eng.championswimmer-2.zip

for me version v2 stuck on bootanimation

championswimmer said:
made another build..
want to know if it solves the reboot issue
http://icxperia.com/championswimmer/x10-semc-es209ra/cm_es209ra-ota-eng.championswimmer-2.zip
Click to expand...
Click to collapse
For me doesnt boot get stuck at cm9 bootanimation too

Related

ICS 4.0 Sources Out! All discussions here!

The ICS sources are being uploaded. Ref: https://groups.google.com/forum/#!to...ng/T4XZJCZnqF8
All other threads related to this (in anyway) will be deleted without notification!
All discussions here!
Cheers!
Ref: http://source.android.com/source/downloading.html
All development related discussions http://forum.xda-developers.com/showthread.php?t=1361827
Hey can u reupload the link. I am getting redirected to that Google groups overview page. Or just tell me the name of the group, i would search it.
ak700 said:
Hey can u reupload the link. I am getting redirected to that Google groups overview page. Or just tell me the name of the group, i would search it.
Click to expand...
Click to collapse
Op update:
http://source.android.com/source/downloading.html
Downloading device/samsung/tuna: 26% (177MB/678MB)
cdesai said:
Downloading device/samsung/tuna: 26% (177MB/678MB)
Click to expand...
Click to collapse
Can you actually port it using these files?
cdesai said:
Downloading device/samsung/tuna: 26% (177MB/678MB)
Click to expand...
Click to collapse
still 26%!!!!!!
Smonic said:
Can you actually port it using these files?
Click to expand...
Click to collapse
Yes, and no
It'll need a lot of work as of now, and i am not skilled enough to do it, many things have changed in ics
Mohanshbhr said:
still 26%!!!!!!
Click to expand...
Click to collapse
yea got a slow connection, also cant dl 24/7, so gonna take a while
CM9 for us, Yay!!
sO WHEN ARE WE GETTING THE CM9?! Atleast the nightlies or whatever
well...porting cm7 to such an extent has given us hope.]
porting ics will be much more easy.
and now i must say....THE RACE IS ON!
lets see who can get the first bootable build of ics
unreal3000 said:
well...porting cm7 to such an extent has given us hope.]
porting ics will be much more easy.
and now i must say....THE RACE IS ON!
lets see who can get the first bootable build of ics
Click to expand...
Click to collapse
na beta, ics wont be easy at all
they added a lot of stuff, and changed lots of things
but fir bhi, it would have been harder if there was no aosp rom for our device, but still its a lot to do
Wanna race?
I will try on my side in Freetime
Damn you Google...
Just so people interested in compiling the sources know :
I wanted to compile sources.
repo did not work : you CAN'T use last python3, downgrade to python 2.7
make : you CAN'T use last make 2.82, downgrade to make 2.81
Java you CAN'T use last openjdk7, you CAN'T use opejdk6, downgrade to sun's java 6 SE
Perl : you CAN'T use perl 5.14, downgrade to perl 5.12...
maybe more, but I can't tell you, because I gave up from there....
come on... what the hell Google ?!
Bruno.
Well looks like CM9 will be out in about 2 months..hope it gets ported to our device soon after that.
TekkenLaw said:
Well looks like CM9 will be out in about 2 months..hope it gets ported to our device soon after that.
Click to expand...
Click to collapse
It will take months if the project is even started.
it is a challenge,you know.
Anyone got ICS booting on their phone?
Even if boot was done .
Nothing maybe less would work properly .
Do you want a Bricked Phone ?
So go Compile it and Flash it .
kylandomos said:
Even if boot was done .
Nothing maybe less would work properly .
Do you want a Bricked Phone ?
So go Compile it and Flash it .
Click to expand...
Click to collapse
seems u r misunderstanding my fellow members.. stay calm.
Smonic said:
Anyone got ICS booting on their phone?
Click to expand...
Click to collapse
yupp , my frnd got it working on his own g3 (i5801) and the problems he faced is,.
1. touchscreen didnt work (he used a bluetooth mouse)
2. wifi didnt work
3. camera fc randomly
4. button lights not working
5. bluetooth filesharing
6. thats all i know.. smooth compiling , flashing , some mods in the dpi ,... i dont know everything he did but only some,. though he's just a beginner he managed these .. .BTW he's not in xda
and yeah it works more flawlessly than cm7 and more advanced features XD
if he made it work, you guys could also .. cool
PLEASE DONT HESITATE TO HIT THE THANKS BUTTON IF I HELPED YOU IN ANY WAYS
anxdateamcool said:
yupp , my frnd got it working on his own g3 (i5801) and the problems he faced is,.
1. touchscreen didnt work (he used a bluetooth mouse)
2. wifi didnt work
3. camera fc randomly
4. button lights not working
5. bluetooth filesharing
6. thats all i know.. smooth compiling , flashing , some mods in the dpi ,... i dont know everything he did but only some,. though he's just a beginner he managed these .. .BTW he's not in xda
and yeah it works more flawlessly than cm7 and more advanced features XD
if he made it work, you guys could also .. cool
PLEASE DONT HESITATE TO HIT THE THANKS BUTTON IF I HELPED YOU IN ANY WAYS
Click to expand...
Click to collapse
Maybe you could ask him for directions?
Because MarcellusBE tried but couldn't boot, if he could boot it, maybe he could also delete some of the bugs (since he had to do the same for CM&).
Also another question from me, did he port from Sources or from the SDK?
Because the things you explained reminded me of the ICS SDK port (No touchscreen working, no camera or wifi and the changing of the dpi(link to that thread here))
Dympy.

New CM9 Nightly Builds for TF101

Hello people,
I was looking through the nightly builds on download.cyanogenmod.com
I saw a fresh build for TF101 dated for 2/27.
Check it out. I will flash it and see how it is.
Someone also needs to create an Official CM9 Nightly page in Dev section.
So who wants to be the Guinea pig? I'm already running that KANG that was posted up earlier this weekend. I may try it after I charge up.
yea...guinea pig here....goes through boot animation and then system ui and trebuchet (the launcher) fc...i would say stay away until some official announcement is made
Yeah. It doesn't even boot up probably. :-(... going back to stock
Sent from my Galaxy Nexus using XDA App
You have to start somewhere.
Now at least we have an official CM9 branch, which means someone is working on it
brzgw said:
Hello people,
I was looking through the nightly builds on download.cyanogenmod.com
I saw a fresh build for TF101 dated for 2/27.
Check it out. I will flash it and see how it is.
Someone also needs to create an Official CM9 Nightly page in Dev section.
Click to expand...
Click to collapse
ehm where from?
Edit: http://download.cyanogenmod.com/?device=tf101
Found IT ^_^
I got launcher force closes when i had an overclocked kernel with a stock rom. Gonna check this out a little later.
Sent from my Transformer TF101 using Tapatalk
I'm surprised that this news seems to be not generating much buzz here. Not knocking any of the other devs, because most of them do amazing work, but CM is the bee's knees. When those nightlies get semi-mature, I'll be running them and never look back. They've never done me wrong before. Any device I've ever had that was supported, was the best ROM available for my needs. YMMV, of course.
I think when its own thread is created youll see the buzz, cm rocks lol
Sent from my R800i using xda premium
I tried flashing it and got the same fc, the system ui and launcher. I tried it again but formatted system this time. Got the same results but was able to see the clock and tablet reboot options.
Guess it's not ready yet
shadrach47 said:
I tried flashing it and got the same fc, the system ui and launcher. I tried it again but formatted system this time. Got the same results but was able to see the clock and tablet reboot options.
Guess it's not ready yet
Click to expand...
Click to collapse
Yep, same here, even with wipe dalvik and fix permissions, FC´s :S
Let us wait for a new update....
Alas, I ran across this on get.cm also. Got excited and then had the FC issues like everyone else. At least it is a step in the right direction.
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Was just about to try flashing it until I saw how many people were unsuccessful. Oh well, guess I'll wait until an official release.
ferreinf said:
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Click to expand...
Click to collapse
Not sure if it's related or not but my wifi on a Kanged version of CM9 is acting weird, disconnecting and saying out of range.
I tried this one first but it could just be the ROM I'm on.
shadrach47 said:
Not sure if it's related or not but my wifi on a Kanged version of CM9 is acting weird, disconnecting and saying out of range.
I tried this one first but it could just be the ROM I'm on.
Click to expand...
Click to collapse
Ok got it to work again, had to use Super Wipe Lite from http://forum.xda-developers.com/showthread.php?t=1245892
after running the script flashed latest revolver and got wifi backup....
Same here, will try your suggestion below.
Edit: Had to run the wipe zip, reflash and boot into current rom and the restore a backup to get it working again. PITA But it works.
ferreinf said:
Don´t know if its related,
lost my wifi hability after trying this, anyone else?
it just won´t turn on :S
Click to expand...
Click to collapse
CM rocks
lollazzo said:
CM rocks
Click to expand...
Click to collapse
i would like to see MIUI V4 on tab, as it will be easier to port than 2.x was ^_^
New official CM9 nightly on get.cm. It boots!!! Gonna test it and report back in a bit.
EDIT1: Wifi works and was able to log into my Google account. Currently restoring my Titanium Backup and will test a bit more after that. Also, camera makes the tablet reboot on first launch, but works after that. Odd. More info to come.
EDIT2: Face unlock is there, but doesn't recognize my face, so I can't test it out. It couldn't recognize my face on my Nexus S 4G either. Maybe my face is just derped up. Anyway, there is nothing that I could tell that is broken. Even the MicroSD mounted with no issue. I don't have a keyboard dock to test it out, otherwise I would. Games and videos both work fine.

[ROM] Unofficial CyanogenMod 9 [BLECM9 0.02]

Current status: CM10.1 in the works and this version will not be updated.
Got started with the project in January, I'm now ready to present you my first custom ROM (and kernel) - BLECM9!
First of all - BACKUP! This is not stable for everyday use just yet.
It also includes my own kernel, based on the latest CAF source code (ics_chocolate). The kernel gets frequent updates from CAF and me. Kernel version is 3.0.8. It's not as stable in the beginning but a better choice in the long term.
It won't include Google Apps, you need to manually install gapps package, as any other CM rom is by default.
Prequisites
U8800 upgraded to 2.3
ClockworkMod Recovery v5.5.0.4, not tested in v5.0.2.7
Instructions for Installing
Download the latest version of BLECM9 (Downloads below).
Copy the package to your internal/external SD card.
Reboot to recovery.
Flash the update package.
Optional: Install Gapps package (Downloads below).
Reboot and wait. The first boot takes around 2 minutes.
Downloads
My Google Code Page
Google Apps @ goo.im
Additional Notes
Report issues.
Changelog.
No, this won't work on U8800-51 or U8800Pro.
Atmel TS users, 0.02 will not work for you. I am establishing a new driver, to make the driver standard. Please standby as this is my top priority.
Everybody, send me logs if something does not work. This kernel is under heavy development. On computer with ADB set up: "adb shell dmesg > dmesg.log" and send the dmesg.log
Major Bugs
No Atmel TS support.
RIL issues (does not detect all SIMs)
NT35510 seems to have issues when turning on the screen (confirm?)
Unstable backlight on low values.
Wifi MAC address is 00:11:22:33:44:55
No Camera.
No Bluetooth.
No FM radio.
No audio (except ringtone/alarm)
Sometimes glitchy hardware acceleration.
No sensors.
More...
Credits: Huge thanks to dzo - without the proprietary blobs from him, this would've not been possible.
This is not just a work of mine, recently another developer joined the process and we are working together.
Collaborators: asm19
Feel free to contact me and also - contribute! Links for the source code is up on my GitHub (signature).
Follow my Twitter to see my development progress.
awesome. lets try
edit: when i try to write wifi password... see attachement. i can still write password, but i can't see what i am writing. everything works good in messeges
2nd edit: common cm problem... error while searching for network
Thanks for sharing.Looks good.
Been waiting for this. I will try it asap. I'm sure it will be get better day by day. Many thanks.
First of all Thank you!
First Impressions:
Touchscreen feels really responsive.
Rom feels very fast too.
Wifi is working good.
Bugs that I've found:
Screen flickering (unstable backlight)
Can't mount SDCard.
RIL isn't working on my u8800.
Overall it looks very promising!
Logs attached.
brdnacer said:
awesome. lets try
edit: when i try to write wifi password... see attachement. i can still write password, but i can't see what i am writing. everything works good in messeges
Click to expand...
Click to collapse
Yes, It's related to HW acceleration, causing some UI glitches.
Have been waiting for this for a long time, even if can't even use it because of Amtel TS.
Keep up with this awesome work
Thanks for this!
I'm using b518 and my phone is multibooting.My phone has recovery made by VICTOR TEAM (genokolar) .This ROM can be a problem for me in terms of Multiboot?Because you writed this in changelog;
New Partition Table.
Click to expand...
Click to collapse
Thank you in advance for the answer to my question!
Best regards...
Great! Been waiting for CM9 a long time ago too... Blefish, you should post some rules as to what we should and how to post in this thread, maybe instructions on how to post specific logs and what kind of info you need. The rest of the discussion should be posted in the general section. I would really hate for this thread to become a mess like Aurora's...
Sent from my U8800
I flashed 0.02, touchscreen didn't work. Then flashed Atmel-test2, touchscreen still doesn't work. Also phone reboots randomly.
I suggest to all of you interested helping Blefish, follow him on Twitter.
For those who tried Atmel-test-2-signed.zip
Blefish @ Twitter said:
Can you try doing in Terminal: "cat /devices/i2c-0/0-004a/input/input1" Do you get any output when touching?
Click to expand...
Click to collapse
forumber2 said:
Thanks for this!
I'm using b518 and my phone is multibooting.My phone has recovery made by VICTOR TEAM (genokolar) .This ROM can be a problem for me in terms of Multiboot?Because you writed this in changelog;
Thank you in advance for the answer to my question!
Best regards...
Click to expand...
Click to collapse
No changes done yet, it works like any other ROM right now.
Blefish said:
No changes done yet, it works like any other ROM right now.
Click to expand...
Click to collapse
Thanks for your answer.
I have one more question.Can i use your bootloader with multibooting?
I will test this after I have unbricked my galaxy tab (I don't want 2 problems same time)
Sent from my U8800 using Tapatalk 2
Is a good iniciative is a belfish source code?
Thanks for the feedback.
I am currently very busy in real life, exams are coming up too. I'll see if I can release another version sometime soon, to get the base working properly.
@Belfish don´t u have stoped de dev of cm9?
---------- Post added at 05:56 PM ---------- Previous post was at 05:53 PM ----------
Blefish said:
Thanks for the feedback.
I am currently very busy in real life, exams are coming up too. I'll see if I can release another version sometime soon, to get the base working properly.
Click to expand...
Click to collapse
Can u use libs from aurora?
anjo88 said:
@Belfish don´t u have stoped de dev of cm9?
Click to expand...
Click to collapse
Noo, I'm not going to stop, just saying I am bit busy so development might not be as fast in the coming 2-3 weeks.
Blefish said:
Noo, I'm not going to stop, just saying I am bit busy so development might not be as fast in the coming 2-3 weeks.
Click to expand...
Click to collapse
ok we wait bood luck for the exames is good if u have some help! Please put a donate button in thread so we can donate u a bear u diserv!
Another bug: it does not recognize my SIM card (TMN)
Also, LOTS of graphical bugs.

[ROM] [UNOFFICIAL] ParanoidAndroid 1.6a + Working Camera

Here is a build of the ParanoidAndroid 1.6a for Tenderloin compiled with a working Preview 8 camera:
NOTE:See this thread for information on the ParanoidAndroid ROM: ParanoidAndroid 1.6a for Tenderloin before you ask questions already answered.
ROM Download: Google Docs Download
GAPPS fixed: gapps fixed direct link
See this thread for information on the CM9 camera build: Unofficial CM9 with working camera
CREDIT: All credit for the camera goes to Dorregaray, whose easy instructions allowed me to build this, and who is the only person in the world who had the perseverance, skill, and knowledge to get it to work.
Nice!
Sent from my SAMSUNG-SGH-T989 using xda premium
ref : [ROM][EXPERIMENTAL]Unofficial ParanoidAndroid with working camera
op's I see the info above..
Love to try it... What CM9 nightly is the build, too, also kernel info.
Please, include some scene shot! Art work
I never take the plunge without seeing the dress first! ha ha ha
bill-da-kid said:
ref : [ROM][EXPERIMENTAL]Unofficial ParanoidAndroid with working camera
op's I see the info above..
Love to try it... What CM9 nightly is the build, too, also kernel info.
Please, include some scene shot! Art work
I never take the plunge without seeing the dress first! ha ha ha
Click to expand...
Click to collapse
Read the OP for the referenced stable build. It's the same with a working camera, and buggy as an anthill.
Sent from my aokp_tenderloin using XDA Premium App
PA Working Camera Build Updated
Updated build available in OP. The anthill moved, but a few bugs remain.
shumash said:
Updated build available in OP. The anthill moved, but a few bugs remain.
Click to expand...
Click to collapse
Nice job getting the new preview 8 out so quickly.
Mike T
Non-Experimental PA with Preview 8 Camera
I've been using this ROM as my daily driver, and it appears stable enough to have the EXPERIMENTAL tag removed. It still has some bugs that relate to the camera itself, but the only BSOD that I have had has been on the initial flashing of the ROM. It has worked stably after that. The only bugs relate to specific camera apps from the Playstore. Some work, some don't. Some crash the camera, most don't. Wifi was initially a problem, but it's fixed with Preview 8 to the point that I haven't had any problems. I think that subject to the usual caveats about using any unofficial ROM, that you can be fairly confident in flashing and using this one.
Why does power just reset the from? That alone made this unusable...
buzz86us said:
Why does power just reset the from? That alone made this unusable...
Click to expand...
Click to collapse
Read the OP for the stable ParanoidAndroid ROM w/o the camera. It's actually a "feature" which is really useful when you make changes to scripts, add stuff into init.d, etc. and just want to reboot without going through lights out and moboot. Just download any of the suggested software power menu apps on Playstore, and the problem is solved.
This just killed my backup touchpad, hah. Was using the AOKP&CM9 Remix by SGA prior to this and was totally fine with it. Wanted to test this out and nope. At first it wouldn't boot into WebOS, then decided to boot into Android only for it to shut down during camera testing and never turn on again.
emeraldlight said:
This just killed my backup touchpad, hah. Was using the AOKP&CM9 Remix by SGA prior to this and was totally fine with it. Wanted to test this out and nope. At first it wouldn't boot into WebOS, then decided to boot into Android only for it to shut down during camera testing and never turn on again.
Click to expand...
Click to collapse
How is that even possible?! Have you tried all button combo's yet...
emeraldlight said:
This just killed my backup touchpad, hah. Was using the AOKP&CM9 Remix by SGA prior to this and was totally fine with it. Wanted to test this out and nope. At first it wouldn't boot into WebOS, then decided to boot into Android only for it to shut down during camera testing and never turn on again.
Click to expand...
Click to collapse
I would suggest putting your problem into its own thread, perhaps some of the great people at XDA would see it better that way. :good:
Soooo tempted. But I'm in love with cm10!
lotherius said:
Soooo tempted. But I'm in love with cm10!
Click to expand...
Click to collapse
Don't blame you, but I am still using this as my daily driver because: a) I can set up individual dpi for each of my apps, including the launcher, and b) the camera works almost perfectly, especially if you use UCAM in place of the standard camera app.
emeraldlight said:
This just killed my backup touchpad, hah. Was using the AOKP&CM9 Remix by SGA prior to this and was totally fine with it. Wanted to test this out and nope. At first it wouldn't boot into WebOS, then decided to boot into Android only for it to shut down during camera testing and never turn on again.
Click to expand...
Click to collapse
While the last thing you did before a crash is the most likely place to look, I doubt that this ROM "killed your backup touchpad". When you installed the PA ROM, did you select "CyanogenMod" at the moboot startup, or did you try to boot it through AOKP? Keep in mind that _SGA_ has a script that modifies /boot and the default moboot image during flash. PA doesn't. From your description of the problem, there's insufficient information to determine exactly what you did, the steps you took, and what caused the crash, but the fact that you were able to boot up to the point that you were testing the camera suggests that the ROM installed fine.
issue
I like this from, but I am missing left side buttons at lower bar. can you help?
Rom download link won't download.
It says the "The file exceeds the maximum size that we scan. Download anyway", but when I click on "Download Anyway" the page just cycles and it doesn't download.
I've seen that page before on Google Drive downloads, but it usually allows a download when I encounter it.
EDIT: Tried it again later, now it works.
How to Shut Down or Restart
Am I missing on how to shut the touchpad down?
When I press the power button it just goes into the starting "paranoid android" animation and comes back on...
EDIT: N/m on second thought... just nevermind.
jurajdrobec said:
I like this from, but I am missing left side buttons at lower bar. can you help?
Click to expand...
Click to collapse
lazypc said:
Am I missing on how to shut the touchpad down?
When I press the power button it just goes into the starting "paranoid android" animation and comes back on...
Click to expand...
Click to collapse
The answer to both questions is in the OP for the non-camera build here: ParanoidAndroid 1.6a for Tenderloin, User Notes/Bugs

Official MIUI V5 for ME860 and MB860

Hello XDA,
(I'm posting this link here because I don't have enough posts to reply to the [ROM] MIUI v5 3.7.19 English thread.)
I was browsing the English MIUI website today and found that the Motorola Atrix 4G was listed as a supported device! :victory:
Official ROM package: http://en.miui.com/download-48.html
Kernel update package: https://www.dropbox.com/sh/s1am14hv1463bse/kcTzU7sneq or do it yourself instructions: http://forum.xda-developers.com/showpost.php?p=50270128&postcount=35
Basic soft keyboard: http://storage.evozi.com/apk/dl/13/...ard.apk?h=2w9QQkC1civRGTlZnZ_1kw&t=1393030263 (you'll need this, or another soft keyboard APK of your choice, because this ROM does not come with a soft keyboard!)
Google Apps package: http://forum.xda-developers.com/showthread.php?t=2482592 (search for "gapps core" on that page)
It's meant for the international version (ME860) but I think it should work it works on the US version (MB860) just fine.
Cheers.
sunaku said:
Hello XDA,
(I'm posting this link here because I don't have enough posts to reply to the [ROM] MIUI v5 3.7.19 English thread.)
I was browsing the English MIUI website today and found that the Motorola Atrix 4G was listed as a supported device! :victory:
Here is the link: http://en.miui.com/download-48.html
It's meant for the international version (ME860) but I think it should work on the US version (MB860) just fine.
Cheers.
Click to expand...
Click to collapse
I'll definitely try this one out. I love MIUI.
interesting... will have to give it a try and see what works and doesn't
prince_of_darkness666 said:
interesting... will have to give it a try and see what works and doesn't
Click to expand...
Click to collapse
Most of it seems to work, camera works, 1080P works on it, not sure about the Flash. Here is the status pages.
There is also an update on the updates page to 4.1.10 but I am not on WiFi. But all seems to work so far for me, I just can't figure out how to get the play store to work.
Also, it looks like it's actually for the MB not the ME.
Just a quick question since I'm a little lost. Miui is actually based on Android like CM right? So wouldn't it have the same bugs as cm 10.1? Like flash not working perfectly and stuff like that?
Sent from my MB860 using XDA Premium 4 mobile app
prince_of_darkness666 said:
Just a quick question since I'm a little lost. Miui is actually based on Android like CM right? So wouldn't it have the same bugs as cm 10.1? Like flash not working perfectly and stuff like that?
Sent from my MB860 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
My Flash seems to not work, unless you auto focus, it won't trigger on it's own.
Edit, Correction, my horrible explanation of this, if Focus is set to auto in settings, it will Flash with Automatic Flash when it needs it. the Flash Seems to be extremely strong though.
Downloading now
will post results :laugh::good:
Hi guys everything apparently works fine however I am unable to install gapps so I can't actually test apps because of no playstore
restarts
i installed it and my phone started to restart every time i turn it on, i have the atrix 4g from at&t (MB860)
works but...
this rom is a hit and miss restarts a minute or so whenever I go in settings. random reboots. would not recommend for daily use. tested on at&t atrix 4g. kernel version 3.1.10 dec 11.
jammin20 said:
this rom is a hit and miss restarts a minute or so whenever I go in settings. random reboots. would not recommend for daily use. tested on at&t atrix 4g. kernel version 3.1.10 dec 11.
Click to expand...
Click to collapse
hi i never had any random reboots at all it was only the gapps problem
Taking a quick look at the source code of the kernel I noticed that the gpu is overclocked at 600mhz, could that be the cause of the reboots? I haven't got any reboot yet and I'm not a kernel expert so I can't assure that...
You can find the source code of the kernel here: https://github.com/shminer/android_kernel_motorola_olympus-jz
Reiki21 said:
Taking a quick look at the source code of the kernel I noticed that the gpu is overclocked at 600mhz, could that be the cause of the reboots? I haven't got any reboot yet and I'm not a kernel expert so I can't assure that...
You can find the source code of the kernel here: https://github.com/shminer/android_kernel_motorola_olympus-jz
Click to expand...
Click to collapse
Nope, GPU is at 300Mhz.
I see, my bad. Thought it was by looking at tegra2_clocks.c and tegra2_dvfs.c :|
A bit offtopic but what application are you using to see the gpu frequency?
Reiki21 said:
I see, my bad. Thought it was by looking at tegra2_clocks.c and tegra2_dvfs.c :|
A bit offtopic but what application are you using to see the gpu frequency?
Click to expand...
Click to collapse
This one http://forum.xda-developers.com/showthread.php?t=2600452
I tried the 4.1.24 release of this ROM (filename: miui_me860_santajin_4.1.24_2d6ed01966_4.2.zip) and it flashes correctly using ClockworkMod.
However, during first boot (after it optimizes 122 Android apps) it repeatedly shows the MIUI logo and pulses the LED with a red color.
Is this what is known as a "boot loop"?
Red light pulse usually means low battery. Try turning the phone off and connecting the wall charger for a few hours and then wipe and flash again
Sent from my MB860 using XDA Premium 4 mobile app
prince_of_darkness666 said:
Red light pulse usually means low battery. Try turning the phone off and connecting the wall charger for a few hours and then wipe and flash again
Click to expand...
Click to collapse
Thanks! I tried your suggestion and the red LED does not pulse anymore. :good:
But it still gets stuck in the boot loop after "optimizing" 122 Android apps.
Update: I did "reset factory user data" in CWM and now I get past the boot loop! :highfive:
Glad to hear you got it working
Sent from my MB860 using XDA Premium 4 mobile app
Now that MIUI was working, the next thing I needed was Google apps --- particularly the Play Store so I could install more apps.
I tried gapps packages from MIUI v5 ROM for Atrix 4G and epinter's CM 10.1 but they both had problems, such as the Play Store would force close.
Finally, I tried the gapps package from MIUI for Atrix HD (yeah, I know, it's a different phone) and it worked! :victory:

Categories

Resources