Database Users

[HELP PLEASE] T-Mobile MYTOUCH with VODAFONE HTC Rom - AM I ROOTED?!?!?

Ok - thanks for coming in and reading my post even though you could have skipped right on through.
I have purchased a used MT3G from craigslist (i know). I am a semi-knowledgeable "veteran" when it comes to rooting and flashing on the g1 - but the mytouch is totally new to me.
I have some SERIOUS SERIOUS concerns as to what my phone even is in the first place. I bought it with original TMobile packaging, phone says tmobile in the front and back - yet when I turn it on it's VODAFONE.
When I boot into recovery, I get the Triangle Exclamation with the phone. The rom is a 1.5 HTC rom and here is my fastboot info.
PVT 32B SHIP S-ON H
HBOOT - 1.33.0009 (SAPP30000)
CPLD - 10
RADIO - 3.22.20.17
May 8th 2009
HOWEVER - when I run the "one click root" - it says I have a 32A system. Eventually I followed the instructions for 1 click root using flash rec and flashed (downloaded) the Cyan 1.4.1a from the "recovery installer" (flashrec-1.1.2 2009-0909). They said my phone was 32A, I just went ahead and downloaded and installed - now I have the cyan recovery when I boot up my phone - I just can't flash ANY roms. I tried RAv 1.6 - for both 32B and 32A. 32A keeps rebooting my phone over and over, 32B just sits at the vodafone and hangs for 15 minutes.
After HOURS AND HOURS of reading the forms and the wiki - I'm at a complete impasse. I need some guidance. Do I have a 32A or 32B? Is it possible for 32A phones to show 32B in the fastboot? Some people need a "goldcard" to do this - I just used flashrec did I do something wrong? It seems as if some people are flashing roms with their regular SPLs - do I need engineering SPL - if so HOW do I flash SPL and radio without bricking.
I just want to flash some damn roms, or even get back to OEM and get my phone up to 1.6. It's such a bad feeling buying a phone, then bringing it home and you don't realize what you've gotten......I just want to get my phone rooted and start flashing roms and I've gotten this far.
ANY HELP GREATLY APPRECIATED!!!!!!!!
edit - the only way I've gotten my phone back to the stock HTC MAGIC rom is luckily upon first running of the CYAN recovery I did a nandroid backup and just restored to my backup after the failed rom flashes.
EDIT 2pm CST : I called T-Mobile, they can track your IMEI and Sim card every time you place a call - they CONFIRMED that my IMEI belonged to a TMOBILE MYTOUCH 3G and not any european phone. This leads me to my next question - is it possible to flash this HTC MAGIC rom onto a TMOBILE MYTOUCH 3G through fastboot, or something - WITHOUT a recovery, WITHOUT having root?
My MYTOUCH 3G is running VODAFONE everything, and it's definitely a EUROPEAN HTC MAGIC rom. Did someone install something on this phone before I got it. Please community - any help is appreciated.

A possible explanation is that someone followed Amon_RA's instructions partway through but did not finish. Specifically, they may have flashed the SPL, the recovery image for 32A and then a ROM for 32A. Since the phone is 32B, the recommendation is then to update the radio and recovery and ROM for 32B after it is rooted.
Perhaps this person rooted the phone, and then did not revert to 32B. Just a guess, though.

ok bro first lets calm down. everything is fine. all the information you need is right in front of you. first if its from europe it could be 32b and or 32a. so to check if you have root lets download a terminal app. if you dont have one pm and ill send you one. once we have that run it and type
su
if it asks for permission or just goes to
#
you are good. now type cat /proc/meminfo
for "MemTotal:" if it says 98024 or around there then you have a 32b. there that took care of what kind of board you have now we have radio and splash. your radio is .009. eng radio is .006. most likely the person that had the phone before only did have the steps. so go over them again with doing a "real" rooting. make a goldcard, get a good rec .img and have sdk working on your comp. if you need help i can help the best i can.

my touch 3g problem!! please help!!!
i bought a my touch 3g from craigslist. and when i turn it on it freezes up and says vodafone and it just stays there.. i need help to get it off can anyone help??? please

Turn it on while holding the Home key and tell us what you get? If you get a menu of options then you have a custom recovery image and you can flash a new rom ... if you just get an image of a ! then you have the stock recovery image.
Also turn it on while holding the back key, give us the information from that screen (also known as the fastboot screen) as this will tell us what recovery options are available to you.

I feel you man.
richboii8939 said:
i bought a my touch 3g from craigslist. and when i turn it on it freezes up and says vodafone and it just stays there.. i need help to get it off can anyone help??? please
Click to expand...
Click to collapse
I worked for T-Mobile and got a mytouch before launch. My MyTouch, During the 32B radio flash, fell off my desk, disconnected, and has been stuck where you are ever since.
doing MANY hours of research and trying VARIOUS different methods did not help. I since bought another, (and a nexus. DO NOT MISS THE MYTOUCH) rooted it and my original MT3G, is still stuck on Vodafone red boot screen, and has a hopefully semi-permanent place in the bottom of my shame drawer.
Mine will not respond to Goldcards, and is not picked up by ADB.
If you plug your phone in, on boot and it is recognized by ADB, then you have hope. If its completely shot like mine. I doubt you'll be able to revive it. Unless ive been missing something since July of last year. (I had it early lol).
If it is recognized.
I would...
-Get a 32B radio
-Open CMD in the radio's folder (Shift + Right click will add a button in your right click to Open Command Prompt There)
-Fastboot flash radio <insert file name here>.zip
-Adb will say "Waiting for Device"
-IF IT IS RECOGNIZED It should reboot into Fastboot and flash the Radio and you should be okay.
*Please correct me if I'm wrong. Im can root all day long, but i can barely explain it. XD*

Mytouch 1.2 after sappimg and reboot phone stuck at htc magic, please help

Hello i'm rooting my mytouch 1.2 for the first time, i've followed all instructions on unlockr, computer recognized phone, gold card successful, installed sappIMG and i've been stuck on htc magic screen for over 35 minutes. So the phone has never got to home screen where unlockr says the touch screen wont work, its been stuck on the htc magic screen. Do I just go ahead with the next procedures or what? thanks

yes, just move along and install custom ROM

A8000 said:
Hello i'm rooting my mytouch 1.2 for the first time, i've followed all instructions on unlockr, computer recognized phone, gold card successful, installed sappIMG and i've been stuck on htc magic screen for over 35 minutes. So the phone has never got to home screen where unlockr says the touch screen wont work, its been stuck on the htc magic screen. Do I just go ahead with the next procedures or what? thanks
Click to expand...
Click to collapse
Wow. The instructions must have been changed a lot since I rooted my phone.
When I rooted it was pretty easy to follow.
Make goldcard
Place goldcard in phone
Reboot to bootloader to flash sappIMG
Reboot to bootloader again to flash custom recovery
Flash stock spl 1.33.0013 back to device (so that you have all of your memory back)
Reboot to recovery to flash your custom rom.
Set up your phone
Reboot back to recovery and do a nandroid backup.

[Q] Stuck At Unzipping Screen (Now It Won't Go Into Recovery Mode)

Hey everyone.
I was rooting my MyTouch 3g w/3.5mm this morning. I'm following the instructions from here ( http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/ ). I had apparently messed up when I was at the restart after flashing sappimg.zip onto the phone and was stuck at the HTC Magic Screen. I restarted my phone by holding down the Reject Call + Volume Down key and told it to flash sappimg.zip onto the phone again so I could redo it correctly. Unfortunately, it's stuck at the "[1] SYSTEM - UNZIPPING" stage. I'm afraid to turn it off because it says to not power off the device.
So, yeah, have I bricked my phone or is there a way to restart this process so I can successfully root?
Thanks much, and have a happy holiday.
EDIT: This sort of resolved itself, but now I can't get into recovery mode. :/

Rhaseo said:
Hey everyone.
I was rooting my MyTouch 3g w/3.5mm this morning. I'm following the instructions from here ( http://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/ ). I had apparently messed up when I was at the restart after flashing sappimg.zip onto the phone and was stuck at the HTC Magic Screen. I restarted my phone by holding down the Reject Call + Volume Down key and told it to flash sappimg.zip onto the phone again so I could redo it correctly. Unfortunately, it's stuck at the "[1] SYSTEM - UNZIPPING" stage. I'm afraid to turn it off because it says to not power off the device.
So, yeah, have I bricked my phone or is there a way to restart this process so I can successfully root?
Thanks much, and have a happy holiday.
Click to expand...
Click to collapse
So your flashing the engineering spl for the first time or are you flashing the stock spl back?

Binary100100 said:
So your flashing the engineering spl for the first time or are you flashing the stock spl back?
Click to expand...
Click to collapse
I'm flashing the engineering spl onto there for the first time.
It appears that being stuck at the Magic screen is normal according to a different (but similar) guide from the Cyanogen Wiki. Would it irreparably damage my phone if I removed the battery despite it being at the "Unzipping" screen for Sappimg (as I was unzipping sappimg for a second time) and proceeding with CyanogenMod's guide instead?
EDIT: It appears my phone just turned off on it's own (battery probably died). I'm going to try CyanogenMod's instructions and see if that works.
EDIT 2: So, I reflashed it with the sappimg that Cyanogen has on his wiki. So everything was smooth sailing until I got to the Recovery step. I cannot, for the life of me, to get it to boot in recovery mode. I hold HOME+POWER but nothing pops up.
EDIT 3: And it appears as if I've bricked it.

Rhaseo said:
I'm flashing the engineering spl onto there for the first time.
It appears that being stuck at the Magic screen is normal according to a different (but similar) guide from the Cyanogen Wiki. Would it irreparably damage my phone if I removed the battery despite it being at the "Unzipping" screen for Sappimg (as I was unzipping sappimg for a second time) and proceeding with CyanogenMod's guide instead?
EDIT: It appears my phone just turned off on it's own (battery probably died). I'm going to try CyanogenMod's instructions and see if that works.
EDIT 2: So, I reflashed it with the sappimg that Cyanogen has on his wiki. So everything was smooth sailing until I got to the Recovery step. I cannot, for the life of me, to get it to boot in recovery mode. I hold HOME+POWER but nothing pops up.
EDIT 3: And it appears as if I've bricked it.
Click to expand...
Click to collapse
Will the rom start? If so, you didn't brick it.
Do you have the Engineering SPL on it? What SPL version do you currently have on there? Remember that if you have the T-Mobile US MyTouch w/3.5mm jack then you MUST have 32B recovery and radio and STOCK (1.33.0013) SPL before flashing a custom rom.
Best way to do it is to flash your custom recovery (I suggest Clockwork Recovery for Mytouch/ION devices) by fastboot.
Afterwards then flash your stock (S-ON) SPL back and then boot to recovery to flash your rom.
REMEMBER!!! YOU DO NOT HAVE A 32a DEVICE! DESPITE WHAT THE SPL SAYS... IT'S NOT TECHNICALLY A 32a DEVICE!!! You MUST treat is as a 32b.

Binary100100 said:
Will the rom start? If so, you didn't brick it.
Do you have the Engineering SPL on it? What SPL version do you currently have on there? Remember that if you have the T-Mobile US MyTouch w/3.5mm jack then you MUST have 32B recovery and radio and STOCK (1.33.0013) SPL before flashing a custom rom.
Best way to do it is to flash your custom recovery (I suggest Clockwork Recovery for Mytouch/ION devices) by fastboot.
Afterwards then flash your stock (S-ON) SPL back and then boot to recovery to flash your rom.
REMEMBER!!! YOU DO NOT HAVE A 32a DEVICE! DESPITE WHAT THE SPL SAYS... IT'S NOT TECHNICALLY A 32a DEVICE!!! You MUST treat is as a 32b.
Click to expand...
Click to collapse
Oh, wow. That explains why I bricked the phone. The Amon_RA Recovery I put on there was 32a... I'm an idiot.
The phone won't start up at all. :/ Looks like I'm out $100 or so.
Thanks for that, though. I was going to give you a "Thanks" but it appears the button has disappeared for me.

Rhaseo said:
Oh, wow. That explains why I bricked the phone. The Amon_RA Recovery I put on there was 32a... I'm an idiot.
The phone won't start up at all. :/ Looks like I'm out $100 or so.
Thanks for that, though. I was going to give you a "Thanks" but it appears the button has disappeared for me.
Click to expand...
Click to collapse
Can you still get into fastboot?

Binary100100 said:
Can you still get into fastboot?
Click to expand...
Click to collapse
Nope. It won't turn on at all.

Rhaseo said:
Nope. It won't turn on at all.
Click to expand...
Click to collapse
Won't boot, no recovery, no fastboot.
If it looks like a brick, if it sounds like a brick then it's probably...

I have a similar problem. I purchased this phone and it just almost works. It boots into fastboot just fine but not recovery. Here are the specifics as they stand now.
Sapphire unknown 32A ship S-on H
CLD 13
Radio 3.22.20.17
May 8 2009, 21:02:32
I made a good gold card...tried the 2010 spl...still hangs during unzip step of the flash process. Any other ROM and I get a main version older error.
Fastboot info version main 2.53.707.2
cid T-MOB010
Any help would be greatly appreciated.

Nice job on probably bricking your phone. You've got the myTouch 1.2 which means you just flashed an incompatible radio. Congratulations!!! I honestly not sure what to tell you. Which sappimg are you trying to use to get the engineering SPL?

Like i said...it was like this when I bought it.
I'm going to try to do a poorman's JTAG...wish me luck.

jonk26.2 said:
wish me luck.
Click to expand...
Click to collapse
Good luck! You can do it!
If you have any questions along the way, please don't hesitate to ask.
JTAG did in fact de-brick my MT3G 1.2 (bought from ebay) the first time I tried it. I made the mistake of flashing the stock ROM, so I would get to the "touch the android to begin" screen and couldn't get any further without a data plan. It wasn't until I probably flashed the wrong sappimg in a root attempt that I started experiencing the stuck at unzipping/FAIL-PU/remote signature verify fail problem...
FYI, I tried flashing radio 2.22.28.25 (the one from the OTA) using JTAG and the radata command, and it fixed my USB. I haven't experiemented much beyond that, but I'm planning to try some more things this weekend.
Moderators, I'd like to suggest merging this thread with http://forum.xda-developers.com/showthread.php?t=773368 and http://forum.xda-developers.com/showthread.php?t=771622 since they all seem to be discussing the same problem.

Trying to fix a friends phone...EVO stuck at white boot screen.

I've tried to flash the 2.2 stock rom and I get an error about a signature can't be verified (unsure of exact verbage). Also, at the bottom it reads "E:Can't Open Cache Recovery Command".
The info in recovery mode is as follows...
SUPERSONIC EVT3 SHIP S-ON
HBOOT-2.10.0001
MICROP-041f
TOUCH PANEL-ATMELC03_16ac
RADIO-2.15.00.11.19
Oct 15 2010, 12:07:00
I've read some of the other fixes but the instructions sound as if I have access to the phone to put it in debug mode or the computer can access the phone. If I don't boot into recovery mode, it's stuck at the white screen. Any suggestions? Thanks!

Cawley said:
I've tried to flash the 2.2 stock rom and I get an error about a signature can't be verified (unsure of exact verbage). Also, at the bottom it reads "E:Can't Open Cache Recovery Command".
The info in recovery mode is as follows...
SUPERSONIC EVT3 SHIP S-ON
HBOOT-2.10.0001
MICROP-041f
TOUCH PANEL-ATMELC03_16ac
RADIO-2.15.00.11.19
Oct 15 2010, 12:07:00
I've read some of the other fixes but the instructions sound as if I have access to the phone to put it in debug mode or the computer can access the phone. If I don't boot into recovery mode, it's stuck at the white screen. Any suggestions? Thanks!
Click to expand...
Click to collapse
As it's not rooted, start over with files from here:
http://forum.xda-developers.com/showthread.php?t=884060

Its not rooted therefor your nand is locked and you won't be able to flash any thing official. Either use the sprint ruu our root from within the bootloader and flash something.
Sent from my PC36100 using XDA App

Thanks! I'll let you know how this goes. I'm assuming it doesn't matter which one I choose to DL?

Cawley said:
Thanks! I'll let you know how this goes. I'm assuming it doesn't matter which one I choose to DL?
Click to expand...
Click to collapse
The .exe is ran via hooking it up to the computer.
The .zip can be changed to update.zip and put on the sdcard for auto-matic flashing from bootloader.

It says Verifying Update Package
And then Signature Verification Failed...

Cawley said:
It says Verifying Update Package
And then Signature Verification Failed...
Click to expand...
Click to collapse
Run the .exe on a computer.
Hook the phone up.
The .exe is the RUU from HTC and will completely reset everything.

It won't pick up my phone...even when I choose the USB option under Recovery Mode. I've tried this already...These are the breaks, lol.

Anyone? This is sort of a dire situation.

Cawley said:
It won't pick up my phone...even when I choose the USB option under Recovery Mode. I've tried this already...These are the breaks, lol.
Click to expand...
Click to collapse
Make sure you have the HTC drivers installed on the computer, sounds like you don't

Okay...so I if the drivers are installed, it'll pick the phone up in recovery mode? Got ya. Thanks.

I installed the drivers and tried to run the RUU.exe and it either said it couldn't communicate with my phone or my battery was too low. I'm uninstalling Sync and installing only the drivers now.

Cawley said:
I installed the drivers and tried to run the RUU.exe and it either said it couldn't communicate with my phone or my battery was too low. I'm uninstalling Sync and installing only the drivers now.
Click to expand...
Click to collapse
You have to do it from fastboot, adb is disabled in the stock recovery. From the bootloader just select fastboot and look for it to say fastboot usb.
Sent from my PC36100 using XDA App

This worked. I appreciate the help Sir!

Stuck on white boot screen
hello all
been at this for over a week and havent been able to find a solution.....
the htc evo phone will sometimes boot all the way only to get frozen( have to pull the battery out) and then when i turn it back on it gets stuck on the white boot screen. history of the phone is unknown to me but dont think it rooted as it indicates S-on.
SuperSonic EVT2-3 S-ON
Radio 2.15.00.09.01
microp-041f
hboot-0.97.0000
kernel 2.6.32.15-gefb08e
build 3.29.651.5 cl252548
pri version 1.77.003
I have been able to connect and flash stock RUU but it still get stuck on white boot screen....Please help at wits end.

xda751 said:
hello all
been at this for over a week and havent been able to find a solution.....
the htc evo phone will sometimes boot all the way only to get frozen( have to pull the battery out) and then when i turn it back on it gets stuck on the white boot screen. history of the phone is unknown to me but dont think it rooted as it indicates S-on.
SuperSonic EVT2-3 S-ON
Radio 2.15.00.09.01
microp-041f
hboot-0.97.0000
kernel 2.6.32.15-gefb08e
build 3.29.651.5 cl252548
pri version 1.77.003
I have been able to connect and flash stock RUU but it still get stuck on white boot screen....Please help at wits end.
Click to expand...
Click to collapse
Wow! Someone that actually uses the search feature....commendable to say the least. lol
From looking at the info you posted, you seem to have an Evo from the first batch that was released. You said the history of the phone is unknown to you......does this mean that it is possible that it was broken when you got it? If the phone accepts the RUU and still doesn't boot, it could be a hardware problem that is causing it to not function properly.

xda751 said:
hello all
been at this for over a week and havent been able to find a solution.....
the htc evo phone will sometimes boot all the way only to get frozen( have to pull the battery out) and then when i turn it back on it gets stuck on the white boot screen. history of the phone is unknown to me but dont think it rooted as it indicates S-on.
SuperSonic EVT2-3 S-ON
Radio 2.15.00.09.01
microp-041f
hboot-0.97.0000
kernel 2.6.32.15-gefb08e
build 3.29.651.5 cl252548
pri version 1.77.003
I have been able to connect and flash stock RUU but it still get stuck on white boot screen....Please help at wits end.
Click to expand...
Click to collapse
Activate the phone take it into a repair store and pay the $35 to have it replaced if you don't have insurance. If you do have insurance the store will replace it for free.

jdh10475 said:
Activate the phone take it into a repair store and pay the $35 to have it replaced if you don't have insurance. If you do have insurance the store will replace it for free.
Click to expand...
Click to collapse
Sprint changed their service policy again. You can no longer get things replaced or repaired for 35 dollars if you do not have insurance.
Sent from my PC36100 using XDA App

xda751 said:
hello all
been at this for over a week and havent been able to find a solution.....
the htc evo phone will sometimes boot all the way only to get frozen( have to pull the battery out) and then when i turn it back on it gets stuck on the white boot screen. history of the phone is unknown to me but dont think it rooted as it indicates S-on.
SuperSonic EVT2-3 S-ON
Radio 2.15.00.09.01
microp-041f
hboot-0.97.0000
kernel 2.6.32.15-gefb08e
build 3.29.651.5 cl252548
pri version 1.77.003
I have been able to connect and flash stock RUU but it still get stuck on white boot screen....Please help at wits end.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=884060&highlight=hboot-0.97+ruu
Which RUU's have you tried using? I'm assuming that since you've been at it for a week now, you've most likely tried them all. However, if you haven't, here's a link of pretty much every evo RUU and PC36IMG that there is. I suggest trying one that matches your specs as closesly as possible (.97 hboot, and the 3.29 software). If that still fails on you, and you feel you've exhausted all other methods, then the beauty of this situation is that you're bootloader is S-on, and the phone is within the 1year warranty still. So if you take it to Sprint, there is a good chance you'll get a replacement.

Rem3Dy said:
Sprint changed their service policy again. You can no longer get things replaced or repaired for 35 dollars if you do not have insurance.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
You are mistaken if the phone has a manufacturer defect which it sounds like this person is having you can still pay the $35. At least
in my part of the country.

[Q] Mytouch 4g stuck in androids skating, PLEASE HELPP!!!!!!!!!!!

So i have this HTC Glacier or mytouch 4g, however u call it, but im trying to find out how to fix it, I go to that HBoot screen, (Btw im new to this forums thing and this mytouch phone, my present phone is the samsung solstice so yea..) So i go to the HBoot screen and go to factory reset and it was starting to do everything well as it seemed but then it did nothing and everytime i try to do it again, it just takes me 3 androids skateboarding, and if i turn it on normally, it goes to the green "T-Mobile mytouch 4g" logo with a white BG, and if i do recovery, it shows a mytouch 4g phone with a Red Triangle and a Red exclamation point, idk about the whole SD Card thing but i have my own SD card with no folders so if theres something i need to put, please tell me specificly. Settings are:
Glacier PVT Ship S-On
HBoot-0.86.0000
Microp-0429
Radio-26.03.02.26_M
eMMC-boot
Sep 27 2010, 11:12:59
Please someone help!! What do i do?

Your post is confusing what exactly are you trying to do?
Sent from my HTC Glacier using xda premium

Read just about any troubleshooting guide that you'll see. ALL "welcome noob" threads have it, in both General and Q&A sections. Wiki has it, link in my signature. Google has it, if you search. TONS of threads. Please do your homework before you're asking the same question for 100000th time. The keyword "PD15IMG" will guide you.

Unfortunately it seems as though you powered off the device in the middle of performing a factory reset. When you thought it was doing nothing, it was working, just not that you could see. Next time, have patience and wait until it tells you it has finished.
You will need to download a stock RUU or PD15IMG.zip and place that on the SD card. After you place the PD15IMG.zip on your SD card, boot into HBOOT. It will look for the PD15IMG.zip automatically and will give the option to install the update or cancel by pressing the corresponding volume button. Run the update and DO NOT turn off your device. When it completes, it will prompt you to press a button to restart. Press that button and you should have your phone back.
Before you ask, the files are available in the Development section. If you can't find them, you shouldn't be messing with this type of activity in the first place.
Sent from my HTC Glacier using XDA App

Cristian said:
So i have this HTC Glacier or mytouch 4g, however u call it, but im trying to find out how to fix it, I go to that HBoot screen, (Btw im new to this forums thing and this mytouch phone, my present phone is the samsung solstice so yea..) So i go to the HBoot screen and go to factory reset and it was starting to do everything well as it seemed but then it did nothing and everytime i try to do it again, it just takes me 3 androids skateboarding, and if i turn it on normally, it goes to the green "T-Mobile mytouch 4g" logo with a white BG, and if i do recovery, it shows a mytouch 4g phone with a Red Triangle and a Red exclamation point, idk about the whole SD Card thing but i have my own SD card with no folders so if theres something i need to put, please tell me specificly. Settings are:
Glacier PVT Ship S-On
HBoot-0.86.0000
Microp-0429
Radio-26.03.02.26_M
eMMC-boot
Sep 27 2010, 11:12:59
Please someone help!! What do i do?
Click to expand...
Click to collapse
read through this.
http://forum.xda-developers.com/showthread.php?p=20344884
please take some time to search before posting questions...

dclaw_fantum said:
Unfortunately it seems as though you powered off the device in the middle of performing a factory reset. When you thought it was doing nothing, it was working, just not that you could see. Next time, have patience and wait until it tells you it has finished.
You will need to download a stock RUU or PD15IMG.zip and place that on the SD card. After you place the PD15IMG.zip on your SD card, boot into HBOOT. It will look for the PD15IMG.zip automatically and will give the option to install the update or cancel by pressing the corresponding volume button. Run the update and DO NOT turn off your device. When it completes, it will prompt you to press a button to restart. Press that button and you should have your phone back.
Before you ask, the files are available in the Development section. If you can't find them, you shouldn't be messing with this type of activity in the first place.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
I think you have the right idea i was just about to say the same thing just try to reset your phone with the stock update and that should have the phone back to factory settings in total