Related
Ok, after messing around with 3.2 I decided to fix the rooting issues without downgrading. The problem with downgrading is it requires a SDCard and requires you to install a couple of programs and then to install an update.zip from the sdcard. I could not get half my ACER's to read and mount a sdcard, and some ACER's I have located in a remote office and trying to walk someone through the process was too painful. I tweaked the the downgrade tool's images to install 3.2 with root instead of downgrading it and jumping through hoops. All I did to the stock image is to copy the ash shell over to /system/xbin/su and set the sticky bit. Everything else is stock.
Update posted here, read thead http://forum.xda-developers.com/showpost.php?p=20654298&postcount=129
New version V4
-- The instructions are in a PDF document inside the download --
== Version V4 ==
-- Added /system/subin/su which is a backup (backdoor) root in case an OTA deletes the /system/xbin/su
-- Set permissons on the su root(#) tool so OTA's shouldn't be able to break it.
-- Added drivers for XP
Summary:
Version V4 is the same as V3 with the only difference being that there is a NEW backdoor script which has some additional features to protect root(#) from getting broken when you do an OTA. I also applied these to this flash image so you wouldn't have to add the additional protection yourself. V4 also has the drivers for XP included. However, when taking an OTA you should also install the backdoor for additional protection. However, you cannot leave the backdoor installed as it turns off sound. So having a little more protection just might save your root in case you take an OTA and forget to install the backdoor.
Download it here: http://www.multiupload.com/NS0X5TK4D1
Alternative download location:
http://depositfiles.com/files/c6pr69ri6
http://www.fileserve.com/file/s2wCQpN/root-3.2.1-V4.7z
http://www.filesonic.com/file/jTA7AMN
http://www.filejungle.com/f/vRnfK5/root-3.2.1-V4.7z
Which 3.2 update is it ? Fully working, no issues ? Good job. Is it power + volume down or volume up to go into recovery ? And is it possible to flash a custom kernel like Honeyvillain on this stock ROM ?
Thx
Has anybody ( including OP) tried this method?
It is the 3.2 OTA for WiFi that my Tablet picked up. It is total stock other than making a SU from the ash shell and putting it into /system/xbin.
Fully works, no issues, have used it on 8 ACER 500's with no issues.
To enter recover it is the left side of the volume button which is volume (-) oopps NOT (+) as I indicated.
Hah, saying Vol +/- is not intuitive on this device since when in landscape, Vol + is the "right" side, but in portrait mode Vol + is the "top" side.
no go
Hi, i can see my iconia uid from adb ( already installed in my pc) but
not from test.cmd, in the extracted package. Any ideas?
REPEATED STEPS 1-4 ( PER INSTRUCTIONS) ON 2 PC'S RUNNING W XP. SO FAR "NO GO" TEST.CMD CANNOT FIND PATH.... AND DOTNETDETECTER, THEREFORE, DOES NOT WORK.
will this wipe all the data on the tablet?
---------- Post added at 04:19 PM ---------- Previous post was at 03:40 PM ----------
JUGOMAN said:
Hi, i can see my iconia uid from adb ( already installed in my pc) but
not from test.cmd, in the extracted package. Any ideas?
Click to expand...
Click to collapse
same here i run the setup file and it installs but after i run test.cmd and it cant find it
Sorry about the test.cmd not working. The script just calls adb.exe to make sure it is working and I have it installed in another directory that I did not include. I posted, to the original message an attachment, it is called fix-Test.7z that fixes the test.cmd. You should be able to just unzip it into the directory you created and run the test. The archive includes the adb.exe and dll's so the test.cmd should work. If you have adb.exe working you really don't the test.cmd, but I found out when talking someone through it (over the phone) this made sure that adb.exe was installed and they had the tablet USB Debugging turned on.
And it is a quick and easy way to get the serial number which you need to flash it.
Thanks,
Let me know if you have any more issues.
does anyone know if flashing it this way will delete all your data on the tablet?
NO GO2
The attchment does fix the test.cmd "problem" but the next step, Dotnetdetecter, does not work. It re-installs the driver (?) then error "adb is old" or something like that. All packages in my computer's ADB are up to date. I think that the "target" directory in the DONETDETECTER IS NOT CORRECT. ANY IDEAS? btw GOOD WORK!!!!!
Many thanks for this. It is really easy like this. Keep up the great work.
UPDATE
Installed, booted, but no root. Previous rom( acer update) was3.2 Gen 2, now 3.2 Gen 1. was worth a try.. Thank you... tablet is working just fine, just no root
jimmkd84 said:
does anyone know if flashing it this way will delete all your data on the tablet?
Click to expand...
Click to collapse
Yea. I've never done this before so I'm wondering the same thing.
Also
Idk about this test thing but if u type 'adb devices' it'll show you which devices (if any) are connected. I always use that as a test when i use the adb to install apks.
bad adb
NO GO2 WROTE
The attchment does fix the test.cmd "problem" but the next step, Dotnetdetecter, does not work. It re-installs the driver (?) then error "adb is old" or something like that. All packages in my computer's ADB are up to date. I think that the "target" directory in the DONETDETECTER IS NOT CORRECT. ANY IDEAS? btw GOOD WORK!!!!!
Not sure what that would be. I just use the adb.exe and dlls that are in the fix.zip. Maybe you have a different version loaded?
ROOT IS NOT in the apps. It is in the adb shell.
What this does is allows you to connect to the device using adb.exe shell and you will get the $ prompt.
at the $ prompt type su and press enter. You will get # and be in su mode.
Now you can do whatever you would like. What would that be, you might ask? Well you could do the following:
1. mount system as rw
2. Push your favorite su tools to the device so they are listed in the apps (busybox etc).
Again this gets you to 3.2 with the ability to have a SU when connected via the adb shell. I left the building of the tools and custom CW to you guys to do as you wish. Here's something else you could do.
1. Shell to it, and issue the SU
2. Mount system as rw
3. Push your favorite tools to where you want (busybox etc)
4. Take the recovery.img (in the zip) and dd dump it to the recovery partition. This will put clockwork on the device (1.5).
a. You should probably run itsmagic too.
5. Get everything the way you want it.
6. Reboot to recovery and CW will load.
7. Now with CW 1.5 loaded, you can build and make copies of your ACER and make them available to anyone you like. CW 1.5 does NOT require an external SDCARD.
Sorry, if I did not make it clear that this is just a SU that you have to use from the command line. If someone wants to give me the links to a SU apk, busybox, etc they'd like included I'd do it. It would only take a few minutes as I got hundreds of these ACER's to flash for our company. I just wanted to get SU, but what the heck, I could build it out if someone would like it that way. ACER really pee'd me off with this, and guess what? They left the ability to gain root in the 3.2 100. Why the 'Sam Heck' did they change the 500 3.2 so you cannot get root?
So, anything I can do to help let me know. Also, If you never want ACER to send you another update I can tell you how to fix that too. All you have to do is the following:
1. Get to the adb shell $
2. type su to get the # prompt
3. Now mount system as rw by doing the following:
a. mount -t rfs -o remount,rw system /system
4. Now rename the update tool by doing the following:
a. mv /system/app/FDUpdater.apk /system/app/FDUpdater.apk.old
mv /system/app/FWupdateService.apk /system/app/FWupdateService.apk.old
5. To get OTA then just reverse the process if you ever want ACER and their OTA to break your fleet of ACER Tablets by pushing silly updates that they think you want then you can undo it. The last I knew, I owned these ACER Tablets and I don't take kindly to them changing something that I do NOT WANT CHANGED. They should be sued, matter of fact, I think they are violating federal laws by destroying data on MY tablets. Anyway, off my soapbox.
i have re run the new test.cmd and is working now, and have successfully run dotnetdetector but i dont want to proceed until someone can confirm if doing this will wipe all data on the tablet
appreciate it, great work btw dev!
---------- Post added at 05:05 PM ---------- Previous post was at 04:39 PM ----------
did this wipe the data on it?
Hello, may i use this procedure on my A501?
Thanks
I did NOT test on the 501 so I do not know. If it was me, I would take the 501 stock images and put them in the kitchen and root them and then replace the ones in my zip with those or better yet, use CW to flash it in.
I think the ACER 501 has cell phone data connection doesn't it? I don't think the stock for WiFi only would be a good idea.
What ACER did on the 3.2 update (my opinion) was removed the Gingerbreak exploit and they removed the adb root exploit (they left the adb root exploit in on the 100). This is what many OEM's did, however many allow you to flash your own easier than ACER seems to want to let us. So if you got 3.2 NON-ROOTED loaded then there is no way to 'hack' out a root (just yet).
So how do you root it? You have to make a custom ROM and flash it. Now ASUS/Motorola/Samsung/Toshiba all allow you to flash your own ROM if you know what you are doing.
ACER seems to hide how to put the tablet into flash mode (if someone knows please let me know). Even if you did flash it they do want those ROMS running so they take each partition and calculate the MD5Sum and write it to, I think, partition #7. Therefore, if you do figure out how to flash in a new boot image or system image the tablet will not boot because the MD5Sums will not match (if you brick your tablet this way you are fubar). Fortunately, someone wrote a tool called itsmagic which you can run to tell the tablet to rebuild these. But if you fubar brick it before you get itsmagic run, I don't know how you get into flash mode using the keys so you'd be up a creek.
So, the 411 skinny on rooting an ACER with 3.2 is to get 3.2 off the device. Fortunately, they made an earlier flashing tool to flash in 3.0. I would guess this leaked out as a way for people to reflash to stock when they have issues.
Once you are on 3.0, you now can use Gingerbreak or the adb root exploit to root it. Once rooted, you can get CW loaded. CW allows you to install your own ROM's. Without CW you can only install ROM's signed by ACER and without ROOT you cannot install CW.
So, if you flash to the 3.0 now you are 'back to the future' in 3.0, you can root and install CW so you can now install a custom ROM from your SDCard.
What I would do is go get the STOCK ROM from ACER for your 501 device.
Once you have the stock ROM, you can use the kitchen tools to unzip the ACER ROM and root it to your liking. Now, re-zip it, but you cannot sign it with an ACER certificate so it will only install using CW. No, big deal because you got 3.0 loaded with CW. You boot to recovery CW and then run the update from your SDCard that you built in your kitchen.
This isn't really that hard to do if you're willing to read some documentation.
I have no idea if it wipes it clean totally. It does walk you through the setup again (like it was new out of the box) so I would assume most things would be wiped. I would back it up and not take the chance because it is best to be backed up.
Just a note here. It says fully stock execpt root? i don't think that's entirely accurate. I believe that it's still downgrading the bootloader, otherwise you'd never be able to get CWM to run, as itsmagic doesn't work with the new bootloader. So your left with stock 3.2 ROM with adb/su abilities and pre 3.2 bootloader.
On another note, I believe step 17 is not needed. CWM run's itsmagic automatically on every boot. So just booting CWM and then rebooting to android should suffice.
Hello everyone, Android newbie here. Got my Motorola Atrix today and I have a question about the Webtop over HDMI mod. Read a whole bunch of threads on here and managed to get my phone rooted, unlocked the bootloader, and installed CWM without too many issues, but I have no idea how to install this mod:
http://forum.xda-developers.com/showthread.php?t=1144119
I have the Android SDK installed but I have no idea how to use it. I tried looking for a step by step guide on how to install it but didn't have any luck. Hopefully someone here can provide an answer.
Thanks all.
Ok, I figured out (kinda) how to use adb. Unfortunately, on the first step where I type in 'adb push DockService.apk /sdcard/' I get "failed to copy DockService.apk to /sdcard//DockService.apk Read-only file system"
Help?
EDIT: Nevermind figured it out myself. SD card was mounted on PC instead of phone.
mount the file system as r/w. get root explorer, give it root and hit the mount filesystem as r/w. thats the fastest way for noobs
Hi All,
I set out to flash my tablet back to stock with the goal of copying some of the awesome asus-specific widgets and applications and installing them back on my tablet after I re-rooted/modded it. I accomplished part of this goal by finding some of the .apk's I wanted, like the Asus weather & battery widgets, the Supernote.apk, anda few others (I still wasn't able to find the Swype Keyboard.apk file)
Anywho, I tried to install the .apk's on my tablet after re-installing cm9 and rooting it but it just says "Application not installed". Anyone have any ideas? And can anyone elaborate on how to copy that swype keyboard APK that I desperately want? I found the other .apk's in the /system/app folder but swype wasn't there.
My other questions relate to CM9:
1) is there any way to decrease the boot time for CM9, or at least customize the boot screen?
2) I'm currently running an older version of cm9 (rc0 unofficial) and I have the stable rc1 of cm9 but when i tried to flash it, it didn't work (i can get the exact error message if needed). Did I do something wrong in updating or is RC1 not compatible with the device? Should I just wait till CM10 comes out?
3) When I initially rooted/flashed cm9, I was able to connect my tablet to my computer and the root of the / directory, but after flashing stock and trying again, I don't have the same luck. Is there some step I missed?
I appreciate any responses, thanks.
- Opethfan89
3 days, 300 views, no responses. BUMP anyone?
opethfan89 said:
Hi All,
I set out to flash my tablet back to stock with the goal of copying some of the awesome asus-specific widgets and applications and installing them back on my tablet after I re-rooted/modded it. I accomplished part of this goal by finding some of the .apk's I wanted, like the Asus weather & battery widgets, the Supernote.apk, anda few others (I still wasn't able to find the Swype Keyboard.apk file)
Anywho, I tried to install the .apk's on my tablet after re-installing cm9 and rooting it but it just says "Application not installed". Anyone have any ideas? And can anyone elaborate on how to copy that swype keyboard APK that I desperately want? I found the other .apk's in the /system/app folder but swype wasn't there.
My other questions relate to CM9:
1) is there any way to decrease the boot time for CM9, or at least customize the boot screen?
2) I'm currently running an older version of cm9 (rc0 unofficial) and I have the stable rc1 of cm9 but when i tried to flash it, it didn't work (i can get the exact error message if needed). Did I do something wrong in updating or is RC1 not compatible with the device? Should I just wait till CM10 comes out?
3) When I initially rooted/flashed cm9, I was able to connect my tablet to my computer and the root of the / directory, but after flashing stock and trying again, I don't have the same luck. Is there some step I missed?
I appreciate any responses, thanks.
- Opethfan89
Click to expand...
Click to collapse
I haven't tried this, but it may work. If you have ADB on your computer, try doing an adb push [name of file].apk /system/app/
If you can't do that, try copy/pasting them there using a root explorer on your device itself. Make sure the permissions are set properly (I don't remember what they are off the top of my head).
After doing that, reboot. See if it works.
As for your CM Questions:
1) I'm not sure if you can reduce the time. For customizing the animation, look at something like Rom Toolbox Pro (which also includes a root explorer like I mentioned above).
2) All CM9 TF300T downloads are located here: http://get.cm/?device=tf300t RC1 is listed there so I'm assuming you did something wrong (what's the error you get?)
3) Did you re-root? I'm not sure I understand.
Link9228 said:
I haven't tried this, but it may work. If you have ADB on your computer, try doing an adb push [name of file].apk /system/app/
If you can't do that, try copy/pasting them there using a root explorer on your device itself. Make sure the permissions are set properly (I don't remember what they are off the top of my head).
After doing that, reboot. See if it works.
As for your CM Questions:
1) I'm not sure if you can reduce the time. For customizing the animation, look at something like Rom Toolbox Pro (which also includes a root explorer like I mentioned above).
2) All CM9 TF300T downloads are located here: http://get.cm/?device=tf300t RC1 is listed there so I'm assuming you did something wrong (what's the error you get?)
3) Did you re-root? I'm not sure I understand.
Click to expand...
Click to collapse
I apologize for the vagueness of my original post. I made this thread in anticipation of flashing everything back to stock, trying to copy over those Asus-specific .apk's (which I managed to do), and then re-rooting/re-flashing CM9.
I flashed the .30 firmware to get back to stock and found the Asus widgets & apk's I was looking for in the /system/app directory. After some bootloops and other fun, I was able to flash back to CM9 and when I tried to install the .apk's I immediately get the message "The Application was not installed"
Of the asus items I wanted, Supernote and Polaris Office were my top two picks, and I was able to acquire Supernote through 3-rd party means and install it. So I'm stoked to have Supernote on a CM9-flashed tablet. I wasn't able to find Polaris Office so I hope to at least be able to find a work-around to install that.
In response to #3 - yes I re-rooted my tablet (lost root with the .30 firmware) and previously I was able to browse the root directory of my tablet while it was connected to my computer. Now, I can only browse the SD card. I still haven't figured out a solution to this, but I just transfer files to my memory card and then to my tablet from there. I'm looking into how to do OTA file transfers via bluetooth or wi-fi, if at all possible.
opethfan89 said:
I apologize for the vagueness of my original post. I made this thread in anticipation of flashing everything back to stock, trying to copy over those Asus-specific .apk's (which I managed to do), and then re-rooting/re-flashing CM9.
I flashed the .30 firmware to get back to stock and found the Asus widgets & apk's I was looking for in the /system/app directory. After some bootloops and other fun, I was able to flash back to CM9 and when I tried to install the .apk's I immediately get the message "The Application was not installed"
Of the asus items I wanted, Supernote and Polaris Office were my top two picks, and I was able to acquire Supernote through 3-rd party means and install it. So I'm stoked to have Supernote on a CM9-flashed tablet. I wasn't able to find Polaris Office so I hope to at least be able to find a work-around to install that.
In response to #3 - yes I re-rooted my tablet (lost root with the .30 firmware) and previously I was able to browse the root directory of my tablet while it was connected to my computer. Now, I can only browse the SD card. I still haven't figured out a solution to this, but I just transfer files to my memory card and then to my tablet from there. I'm looking into how to do OTA file transfers via bluetooth or wi-fi, if at all possible.
Click to expand...
Click to collapse
So did you try what I suggested in my post (pushing the files to /system/app on your tablet, rather than trying to install them through File Browser or whatever)?
I'm not sure if they rely on any custom Asus framework stuffs, like with many other OEMs. I personally doubt it because Asus barely changes anything. I think it *should* work, but can't guarantee it.
The easiest way to get the files to /system/app (if you're not very ADB or tech. savvy) is to download a root explorer (like Rom Toolbox Pro has, for example) and copy all the .apks that you want from your sdcard to /system/app.
Link9228 said:
So did you try what I suggested in my post (pushing the files to /system/app on your tablet, rather than trying to install them through File Browser or whatever)?
I'm not sure if they rely on any custom Asus framework stuffs, like with many other OEMs. I personally doubt it because Asus barely changes anything. I think it *should* work, but can't guarantee it.
The easiest way to get the files to /system/app (if you're not very ADB or tech. savvy) is to download a root explorer (like Rom Toolbox Pro has, for example) and copy all the .apks that you want from your sdcard to /system/app.
Click to expand...
Click to collapse
I haven't tried pushing the files via ADB yet. I just wiped out my computer so I need to re-install the drivers to get the tablet recognized and/or the the Android SDK.
In the 3rd point of your point, do you mean my external SD card or the internal memory?
the Transformer Pad has a good portion of internal memory partitioned as an sdcard and mounts it at /sdcard/. I haven't used an external SD card with my tablet yet. Either one should work.
I also found out that Polaris Office has some library files that you probably should grab as well. You can find them at:
/system/lib/libpolarisoffice_tablet.so
/system/lib/libpolarisofficedump.so
/system/lib/libtfapps-polaris.so
/system/lib/libtflua-polaris.so
Click to expand...
Click to collapse
There might be some library files for the other apps. You might want to look around in the /system/lib folder for other libraries as well.
Link9228 said:
the Transformer Pad has a good portion of internal memory partitioned as an sdcard and mounts it at /sdcard/. I haven't used an external SD card with my tablet yet. Either one should work.
I also found out that Polaris Office has some library files that you probably should grab as well. You can find them at:
There might be some library files for the other apps. You might want to look around in the /system/lib folder for other libraries as well.
Click to expand...
Click to collapse
That's awesome, thanks. If I'm able to get this working I will post a guide for others to follow. I ended up just signing up for the swype beta (which I think is stupid since I paid for that app when I bought my tablet, shouldn't have to get a reduced version)
I was able to find a working supernote.apk app on a 3rd-party website and it installed and worked perfectly.
My other issue I'm having is I try to push the files with ADB and it tells me my tablet is read-only? it gives that same message no matter which directory I try to push to. I have the superuser app and have root, but superusers' log shows the 'adb shell' is consistently being denied root permission (if i try to do su or something similar). Any thoughts?
opethfan89 said:
That's awesome, thanks. If I'm able to get this working I will post a guide for others to follow. I ended up just signing up for the swype beta (which I think is stupid since I paid for that app when I bought my tablet, shouldn't have to get a reduced version)
I was able to find a working supernote.apk app on a 3rd-party website and it installed and worked perfectly.
My other issue I'm having is I try to push the files with ADB and it tells me my tablet is read-only? it gives that same message no matter which directory I try to push to. I have the superuser app and have root, but superusers' log shows the 'adb shell' is consistently being denied root permission (if i try to do su or something similar). Any thoughts?
Click to expand...
Click to collapse
You need to remount your system as read-write. Trying doing an adb remount. If that doesn't work, try typing the following into a terminal emulator:
su
busybox mount -o remount,rw /system
Click to expand...
Click to collapse
Try ADB pushing again after that.
if you are able to install the apps by adb push. then maybe a .zip file can be created and use CWM to install all the stock apps.
Link9228 said:
You need to remount your system as read-write. Trying doing an adb remount. If that doesn't work, try typing the following into a terminal emulator:
Try ADB pushing again after that.
Click to expand...
Click to collapse
Well part of the issue is that I can't "su" while in adb shell. It says permission denied. When I type ADB devices normally, it'll list my device. But when I'm in "adb shell" it doesn't show anything. "adb remount" gives me the message "error: device not found".
Any other suggestions?
opethfan89 said:
Well part of the issue is that I can't "su" while in adb shell. It says permission denied. When I type ADB devices normally, it'll list my device. But when I'm in "adb shell" it doesn't show anything. "adb remount" gives me the message "error: device not found".
Any other suggestions?
Click to expand...
Click to collapse
That's weird. I've never seen that before. Are you certain that your adb drivers are installed properly? You can always use a terminal emulator on your device itself to remount the system as read/write and then use adb afterwards.
Link9228 said:
That's weird. I've never seen that before. Are you certain that your adb drivers are installed properly? You can always use a terminal emulator on your device itself to remount the system as read/write and then use adb afterwards.
Click to expand...
Click to collapse
I'm pretty sure my drivers are installed correctly. Everything shows up in device manager, "adb devices" lists my device, fastboot flashes files just fine, so yea.
And yea I have the terminal emulator on my tablet and I've used it before for some stuff (installing Ubuntu) so I will try the steps you guys have mentioned. I'm in the process of trying out some other ROM's right now (Hydro atm, and then probably CleanROM) so once I go back to stock and have access to the appropriate files I'll try these steps.
Is there a way to root the Streak 5 or install custom recovery without using USB connection? The USB charger port is broken so I am unable to connect through USB. I´ve tried to root the phone with GingerBreak and Z4Root without success. Maybe it´s possible to root the phone or flash recovery with Flash_image in Terminal Emulator but I am unable to find a guide to do so. Any help would be apreciated, I´ve searched the forums here but am unable to find the answer I´m looking for.
edit:
I´m on Android 2.2.2, 360 stock ROM, build 17397.
Well, if the answer you were looking for is "yes it can be done", then it's obvious why you haven't found the answer you were looking for.
You have to have a working port on the Streak to install CWM since installing a custom recovery requires being in the Streak's Fastboot mode. Rooting may be possible, but unlikely since you have to copy files to the \system directory, which isn't writable unless you've rooted using CWM to install the files or ADB to push them.
Short of finding an exploit to root with, he might(?) be able to by disassembling it and pushing root to /data/local and setting permissions with a pc.
TheManii said:
Short of finding an exploit to root with, he might(?) be able to by disassembling it and pushing root to /data/local and setting permissions with a pc.
Click to expand...
Click to collapse
ah.. i see... by taking out innerSD and manually push root into it.. it seems possible that way...
Rooting is ultimately getting SU somewhere runnable and changing it's permissions to 06755.
It just makes the most sense to place it in /system/xbin 99.95% of the time.
it seems the guy doesnt read the forum thorough enough.. because there is solution to it already..
http://forum.xda-developers.com/showpost.php?p=29190631&postcount=12
Dont recall gingerbreak working on 350+ as dell pretty much patched everything.
I believe it works on 318 or thereabouts, but OP is on 360 he already stated it didnt work (but not which exact version of gingerbreak)
well.. at least he can try first... but it seems not possible is it?
Gingerbreak version 1.2 works on stock 351 but not on stock 360.
Sent from my Dell Streak using xda premium
TheManii said:
Short of finding an exploit to root with, he might(?) be able to by disassembling it and pushing root to /data/local and setting permissions with a pc.
Click to expand...
Click to collapse
That sounds like a good idea since I have already cutted out for access to the internal SD card. What would be the best program for Windows 7 to push root to the SD card and change the permissions?
You would need to be able to read ext3 partitions and modify the file permissions.
I've never bothered trying under windows, the simplest way is to do it under linux.
You can install it in a VM if you wish, or you can try and figure out how to do it with additional software under windows.
Regardless you should try pushing su to /data/local/ and setting it's permissions to 06755 (rws--r-s-r-x).
If you get that far we'll continue from there
Would it be possible to get a repacked 360 stock ROM (apk or zip package) that is already rooted, and then install it on the Streak using the 360 stock recovery? Maybe that´s not possible because of the signature verification but I wonder if it would be possible. Then I would have to find someone with a rooted 360 ROM to make the package for me.
TheManii said:
Regardless you should try pushing su to /data/local/ and setting it's permissions to 06755 (rws--r-s-r-x).
If you get that far we'll continue from there
Click to expand...
Click to collapse
sorry to bust in. /data is mounted nosuid for a reason. Don't know whether this is so on the 360, but at least check ($ mount |grep /data) before you open your device and risk hardware damage.
THIS METHOD IS NO LONGER WORKS as of update version 2.0.5 and higher.
Please visit this thread instead for the current rooting method.
Posting in this thread will get you nowhere, let it RIP.
ANNOUNCEMENT:
If you have a new Nook HD/HD+ and want to root and get the GAPPS running, you should follow the guide at the All-in-One thread instead. That said, I won't copy all the information here to there, so you should continue to read on.
Let me start by saying that I didn't come up with the working root method. The original root instruction came from verygreen in this thread. And I am not a developer, I merely have a few linux background and even less so in the Android. I worked on this on my spare time by myself.
I merely take what was working, but unusable to make it usable. I found something that he is missed. This may actually be working on Nook HD (non-plus) also, but since I don't own one I can't say that it will.
Disclaimer:
If something gone wrong, it's all your fault. I take ZERO responsibility for what happen to your device, your life, your wife/husband, your kids, your unborn child and etc. You get the idea.
Background:
When I found out the root doesn't actually work past a reboot, I start looking what actually cause the Nook to be pissed and factory reset itself. Well, it seem that the /system and anything in there is basically coming from a /dev/block/mmcblk0p8 And if something got change, Nook get pissed and do a FULL FACTORY RESET(I'll explain in a moment). Well, at least I start investigated under that idea.
What I found:
What I found, or at least what I think I found is that, probably just adding file, or increase in the size(maybe there is a threshold for this), will cause it to do a full factory reset. What I also found is that there is a $PATH for /system/sbin but not pointing to anywhere. So I come up with the idea of making another ext4 file system in a file and loop mount it to /system/sbin I guess that work(very well). What I also found is that, there are two kind of factory resets. The one that you perform yourself, which is actually not a full factory reset and the one that Nook get pissed and do the full one.
A factory reset that you perform yourself, whether from the GUI or button combination will basically clean the partition /data while a full blown one will basically restore other partition such as /system
What is included:
basically a zip file, inside that zip file are 6 files.
boot_complete_hook.sh.bak this is basically a modified version of verygreen's
busybox & su are basically from his thread
superuser.apk well I found this one floating around and seem like a good idea to stick it in there (not even sure if it gonna work w/ Nook)
makeroot.bat this is basically what do most of the work. It's base on verygreen original rooting instruction.
sbin_mount This is basically an ext4 file system which have su and another version of busybox all setup nice and tidy for you all. This version of busybox is 1.20.2r2 which I grabbed from here.
Prerequisite:
ADB, it's your responsibility to have adb up and running, meaning not just have it install, but it can see your nook also.
leapinlar wrote a post to help you getting ADB to work here.
Now to get root:
all you have to do is unzip it and run makeroot.bat (obviously you run this in windows command prompt). Yub that's all. The batch file will do the rest, including reboot the nook and wait for it to reboot and stuff. Won't make a coffee for you though.
The manual and hard way:
well, I will only explain this in a summarize way. Basically this start with verygreen rooting method. It basically take advantage of the exploit and run /data/boot_complete_hook.sh which you adb push yourself(with correct permission) with root privilege. What you can run in there is basically up to your creativity. So obviously in this case, you mount the sbin_mount as an ext4 filesystem in the /system/sbin You can make this file yourself if you want to, in linux using dd and mkfs command. Basically using dd to create a file volume to the size you want and mkfs to format it to ext4. Mount it and start uploading stuff you want in there. You will have to correct all the file permission as well. Since all of this will be mounted to /system/sbin you should be aware what you gonna put in there. I guess I could make this thing 100MB, but for this specific purpose 10MB is enough. I my case, just the su and busybox and the symbolic links for the busybox. I'm doing this for the long term. I'm too lazy to point to busybox everytime I wanna do something.
What to do afterward:
Now that you have root, you can Enable Unknown Source to allow you to install app from within the device and install GAPPS. Follow the two guides below if you interested.
Enable Unknown Source: Again, I make an easy little tool for you here.
GAPPS: here.
Did I missed something:
Well, as I said I'm no coder so if I didn't do a clean job, you can refine it. If I didn't document or give proper credit, then I guess I missed that. Sorry about that, again I'm no coder and never done this. And finally:
If this thing work for you, feel free to hit that "THANKS" button. I spent many hours trying to come up with this solution.
FAQ:
Q: My so and so application when attempting to have root access get freeze up, or superuser doesn't work?
A: Well, I'm not sure if this is dued to how the Nook side-loading work or not, but it seem for some reason superuser won't start by itself. So you have to start it manually the first time.
Q: I type in "adb root" and I can't get in as root, it doesn't work?
A: yes it does, it's just not working with adb root. You can get in via "adb shell" once you get in, type in "su" and you can see that you now should have root access.
Thank you so much! This works perfectly. Survives reboot.
here's the Linux version.
Thanks someone0 for getting this started.
Haven't fully tested the linux version, but it loads and starts up, so should work.
extract, and open up terminal and navigate to the dir you extracted to, and type
./makeroot.sh and then enter.
This sounds like a good idea initially.
It is true that the B&N does not just check for /system/xbin/su directly like they did in the past.
This time they check for something else and I just had no time to look into it more deeply to find out what is it they are actually checking for. I plan to figure this out on Friday when I am back home.
Also wanted to tell you that having Linux background is a great thing when tinkering with Android (at a low level, anyway). I don't have much Android background to speak of as well.
This works really well, and thanks to Someone (and mad props too) for getting persistent root working on this.
I may be being very naive, but my suspicion on the reboot is around the manifest file that's present at root.
It seems to be generated by the boot process and it might provide a quick and dirty list of what's permitted on the device to check. With persistent root, lots of investigation becomes a lot less painful. I expect that by end of day we'll have install unsigned running.
Early in my experimenting with the HD+, I noted:
- some versions of the Google Services Framework can be installed via adb
- when I launched the native calendar app after installing gsf, it wanted to sync to a google account, and was able to add the google account
- one version of the Play store installed and launched as far as throwing the 'you must accept the terms of service' before crashing
What BN most likely does is calculating the hash value (or digest, if you prefer) of certain system files that they think shouldn't be tampered with, then during reboot, the values of these files must match, or they will do a factory reset.
The key point is to find out where they do these checks and fool the check.
This sound simple but it depends on how they implement it. If they use binary decisions (like if the hash_value == calculated), then it is easy to get around. If not (e.g. using white box algorithm to hide keys), then it get more complicated.
excellent and very elegant solution. Kudos!
I'm heading out to work, and if you think your theory is right, try poking around with it. Now that your have root, you can try to dd those bootloading partitions out to user area and upload them out to PC and inspect them.
looking at the vold.fstab
Code:
xloader -> /dev/block/mmcblk0p1
bootloader -> /dev/block/mmcblk0p2
recovery -> /dev/block/mmcblk0p3
boot -> /dev/block/mmcblk0p4
rom -> /dev/block/mmcblk0p5
bootdata -> /dev/block/mmcblk0p6
factory -> /dev/block/mmcblk0p7
system -> /dev/block/mmcblk0p8
cache -> /dev/block/mmcblk0p9
userdata -> /dev/block/mmcblk0p10
Be extra careful when touching those partition if you not sure, don't touch them. But making a block copy of them and taking them out should be relatively easy and safe. Obviously you gonna need a Linux box to do this. I setup a VM on one of my PC last night because I need to get a ext4 partition and put all the goodies in there.
krylon360 said:
here's the Linux version.
Thanks someone0 for getting this started.
Haven't fully tested the linux version, but it loads and starts up, so should work.
extract, and open up terminal and navigate to the dir you extracted to, and type
./makeroot.sh and then enter.
Click to expand...
Click to collapse
Just wonder why do use a zip file for the linux version? Wouldn't this kinda messup the permission when compress/uncompress? meaning, makeroot.sh may not have the proper permission when unzip. Please double check.
someone0 said:
Just wonder why do use a zip file for the linux version? Wouldn't this kinda messup the permission when compress/uncompress? meaning, makeroot.sh may not have the proper permission when unzip. Please double check.
Click to expand...
Click to collapse
works just fine.
I chmod a+x'd the script before putting it into the zip.
heh, yeah, it works. Forgot I had my touchpad pluged in and it rebooted it....
whoops.
thanks for posting the location of the /recovery partition. I want to put a copy of htat on ice to prevent BN from undoing any of my work in a future update - I may want some of the fixes they have, but I want to be able to roll them back if needed.
Someone0 are you around can you pm me, Your root works, I installed nook color tools ver .02 in system/app folder and was able to see it in my sideloaded launcher, was able to uncheck/check install non market apps which sets the setting for US to be able to install .apk files from the nook itself, ONLY ISSUE is since I put that file in the system/app folder and the nook didnt like it I got stuck in a bootloop and get to start this process all over again! (nook resetted to ground zero)
maybe we temporary can leave it there get us the permission to install non market apps then remove the file and we will be ok or maybe stuck in another bootloop.
---------- Post added at 09:20 PM ---------- Previous post was at 08:52 PM ----------
GOT IT WORKING NOW:
1. Once rooted, get a file manager with root support and enable read/write permission to /system
2. temporary copy nook tools ver .02 .apk to the system/app folder
3. have a sideloaded launcher and check the app drawer youll see nook tools, run it, first screen uncheck and check the install non market apps box couple of times make sure its checked afterwards
4. have a test .apk to run the BN installer on and see you can now install .apks from the NOOK HD and HD+
5. remove the nook tools.apk file from the system/app folder and quit your file explorer which should reset everything for the system folder back to the way it orginally is!
6. reboot, if you reboot successfully with no boot loop 8 times, your GOLDEN FOR NOW! once again load up a file manager go select an .apk file and see you can now install it! Next step is trying to get amazon market working! then google somehow, but for google you need files in system/app folder permanently!
7. YOU CAN NOW SUCCESSFULLY DOWNLOAD .APK FILES through web, email, any other app and install through the NOOK HD or HD+ BN installer for .apk files. Watch what you install, if it gets put into /system or /system/app folder DREADED BOOT LOOP which resets everything! AMAZON MARKET WORKS!!!! and apps from there install fine to the BUILT IN MEMORY.
** Hopefully amazon market dont install stuff to the system/app folder and if it does hopefully you do not get the dreaded boot loops where you got to start this whole process over again so be forwarned!!! you will loose all data on NOOK HD and HD+ if u get stuck in the bootloops! BACKUP STUFF before messing with root and this kind of thing! DEVELOPMENT!
Aside from moving the actual apk to /system/app/ temporary (since you only do it once), putting a symbolic link there may work also without creating a reset loop. But can't you just side load the apk and run it in other folder?
someone0 said:
Aside from moving the actual apk to /system/app/ temporary (since you only do it once), putting a symbolic link there may work also without creating a reset loop. But can't you just side load the apk and run it in other folder?
Click to expand...
Click to collapse
when you sidelaod it OR install or have it installed to another folder or ran from another folder it cant modify the setting to allow non market apps to install!!
has to be in the /system/app folder THEN RAN from app drawer then you can set the setting uncheck and check box quit program and for now YOU HAVE to remove the .apk from the system/app folder and then you can reboot and the setting sticks! I GOT AMAZON MARKET INSTALLED right now installing apps! NOW WE GOT A KINDLE ladys and gentleman!
Amazon apk installs in internal memory. Apps downloaded from Amazon get installed in internal memory. You can then move them to SD card or leave them in internal memory. System apps are provided in the ROMs by the developers or vendors. ALWAYS back up before making system changes.. Now rooted - use Titanium Backup. System/app should be static throughout ROM lifecycle unless modified by user.
skyhawk21 said:
7. YOU CAN NOW SUCCESSFULLY DOWNLOAD .APK FILES through web, email, any other app and install through the NOOK HD or HD+ BN installer for .apk files. Watch what you install, if it gets put into /system or /system/app folder DREADED BOOT LOOP which resets everything! AMAZON MARKET WORKS!!!! and apps from there install fine to the BUILT IN MEMORY.
** Hopefully amazon market dont install stuff to the system/app folder and if it does hopefully you do not get the dreaded boot loops where you got to start this whole process over again so be forwarned!!! you will loose all data on NOOK HD and HD+ if u get stuck in the bootloops! BACKUP STUFF before messing with root and this kind of thing! DEVELOPMENT!
Click to expand...
Click to collapse
This is why I put the /system back to ro, at least that is what I think I did.
Amazon Store working on ROOTED Nook HD
Proof of Concept:
http://youtu.be/wCyd730L74Y
skyhawk21 said:
Proof of Concept:
http://youtu.be/wCyd730L74Y
Click to expand...
Click to collapse
LOL, your internet is slow. Could have cut the video time by 1/2 if not 2/3 if you switch to faster ISP.
skyhawk21 said:
Someone0 are you around can you pm me, Your root works, I installed nook color tools ver .02 in system/app folder
Click to expand...
Click to collapse
What exactly did you install? I cannot find "nook color tools" in Google Play or on APKTOP. Thanks for your hard work!
NEVERMIND! I found the thread that has the link for the app: http://forum.xda-developers.com/showthread.php?t=868366 Thanks again.
does this root method work on Nook HD+2.0.2?
if not how I can downgrade to 2.0.0?