Related
Hi fellows,
For sure, more than 95% of ROM development at XDA is devoted to P1000 version (Euro/USA/... Galaxy Tab version). Unfortunately (or not...), Samsung released at Latin America two different versions of GT: P1000L and P1000N. My researches shown that theses version has different hardware from P1000 one, and the most important, IMO, is the touchscreen. Conclusion: when we try to use custom ROMs, we aren't able to even use it.
So, I have started this thread to centralize information regarding P1000L/P1000N. Please, if you have these devices and have already tried to use a custom ROM or Kernel, please post the information here. With this, we can verify what modifications we need to make to adapt XDA custom ROMs/Kernels to our GTs.
We have the following topics here on XDA about our devices:
Humberto's ROM and Kernel (Froyo)
Humberto have compiled a Froyo Kernel and ROM with many improvements
http://forum.xda-developers.com/showthread.php?t=974408
Humberto's Kernel (Gingerbread)
Humberto have modified the original, leaked P1000N gingerbread kernel to add Lagfix and gave us instructions how P1000L users can flash P1000N gingerbread version
http://forum.xda-developers.com/showthread.php?t=1124224
My Gingerbread kernel
I have compiled a P1000L/N kernel for gingerbread after the source code release, adding many things like UV, OC, new governors, etc. To avoid mess with Humberto's thread, I decided to start a new one:
http://forum.xda-developers.com/showthread.php?t=1274855
With the right kernels now, we can flash customs ROM like:
BOCA
http://forum.xda-developers.com/showthread.php?t=1172307
Overcome
http://forum.xda-developers.com/showthread.php?t=1205990
CM7
http://forum.xda-developers.com/showthread.php?t=931857
OBS.: Always refer to P1000L/N Gingerbread thread from Humberto to verify which kernel you need to flash to use one of these ROMs!
Thanks!
I can provide the PDA, Modem and CSC Multi files to be flashed in Odin for P1000N from Claro provider if they're needed at all, only downside is that they're JJ1 not the JJ5 which they're currently shipping Tabs with. Honestly I don't see any difference between the versions, but there should be some.
Well, apparently we got a new kernel for GT-P1000L deceives that camera and TV tuner is fully working and has interesting capabilities, like 1.4GHz overclocking! Thanks to @humberos. More info on http://forum.xda-developers.com/showthread.php?t=974408
Additionally, my Vivo GT has received an update through Kies and now my ROM version is P1000LVJJMA, which I don't know yet if this kernel is compatible. I have contact @humberos and we will try to find out.
Sent from my GT-P1000L using XDA Premium App
Hi Everybody,
Im users of galaxy tab P1000N and i want to update mi galaxy tab to GingerBread because my baterry is finished in 5 hours +o- and a friend tell me in gingerbread the baterry lasts longer!
If anyone know where is all files that i need to update my tab, and a guide to do, plx post it !!
Greetings !
Currently http://forum.xda-developers.com/showthread.php?t=1124224 is a Gingerbread Kernel that can run a version of CM7.
I can not attest to validity of the ROM, as I don't have a latin version, but yeah... There it is.
jffiorillo said:
Hi Everybody,
Im users of galaxy tab P1000N and i want to update mi galaxy tab to GingerBread because my baterry is finished in 5 hours +o- and a friend tell me in gingerbread the baterry lasts longer!
If anyone know where is all files that i need to update my tab, and a guide to do, plx post it !!
Greetings !
Click to expand...
Click to collapse
Are you on stock rom ? I upgraded my p1000n to gingerbread overcome and feel that the battery last less than with froyo.
Sent from my GT-I9000 using Tapatalk
I see a lot of P1000CWLZTO being offered in online shops in Brazil.
Would that be a third version: "P1000C"?
What are the differences between the L, N and C versions?
I do like to have the digital TV. Actually, is it just 1seg? Does it show 16:9 broadcasts correctly (soccer!)?
Thanks!
Hi! I just got a gt-P1000n unlocked tablet from Chile. I leave in Canada.
Froyo 2.2, baseband P1000NUBJM2.
This is my first expeeience with android, i come from wm.
I've got a lot to learn.
After many unsuccessful attempts with z4root, i did root my tab with oneclickroot.
I have read these latin tabs are different than others. How?
Lesser quality?
I can't find any specs comparaison on the web.
Thanks
ecb5 said:
Hi! I just got a gt-P1000n unlocked tablet from Chile. I leave in Canada.
Froyo 2.2, baseband P1000NUBJM2.
This is my first expeeience with android, i come from wm.
I've got a lot to learn.
After many unsuccessful attempts with z4root, i did root my tab with oneclickroot.
I have read these latin tabs are different than others. How?
Lesser quality?
I can't find any specs comparaison on the web.
Thanks
Click to expand...
Click to collapse
Not at all... just a little different in hardware. I had that firmware on my P1000N. Maybe if you check on the small print on the back of your tab, you should see P1000N... let us know.
Basically we have a few different Tab hardwares. The P1000, Euro US and etc, both GSM and CDMA versions. Latin versions P1000L / N (and maybe C as commented above). P1000L and N are the same, except P1000N does NOT have TV, P1000L has TV, 1seg like in Brazil. There is also another different hardware, the Tab with wifi only (no SIM chip).
Since P1000 is the most commonly used one, there is a lot more development going on for it... but luckyly we have HumberOS for the salvation of our latin version tabs. Just Google "xda humberos" to find his posts.
Cheers.
Yes i have the 1000N.
I read here it is difficult to flash an gingerbread orovercome rom!?!?
Only Hubertos roms are working, isn't it?
Thanks
ecb5 said:
Yes i have the 1000N.
I read here it is difficult to flash an gingerbread orovercome rom!?!?
Only Hubertos roms are working, isn't it?
Thanks
Click to expand...
Click to collapse
You can flash Gingerbread from Samsung. If you want to flash anything customized, like Overcome rom, you need to do it through humberos kernel, made for our latin tabs.
SGT-P1000N - XDA App - CM7 thanks to HumberOS
alroger said:
You can flash Gingerbread from Samsung. If you want to flash anything customized, like Overcome rom, you need to do it through humberos kernel, made for our latin tabs.
SGT-P1000N - XDA App - CM7 thanks to HumberOS
Click to expand...
Click to collapse
If i flash Gbread from Samsung update will i lose root?
If so, can it easely be rooted again?
Is overcome stable and a real improvement over gingerbread?
Thanks for your time
ecb5 said:
If i flash Gbread from Samsung update will i lose root?
If so, can it easely be rooted again?
Is overcome stable and a real improvement over gingerbread?
Thanks for your time
Click to expand...
Click to collapse
Yes, you loose root. Then you can just flash humberos' cf-root or voodoo lagfix kernel to get root back. Overcome is very good and stable. Just remember to replace the zImage file inside Overcome's zip file with HumberOS' kernel voodoo lagfix.
SGT-P1000N - XDA App - Overcome 3.00 ICARUS thanks to HumberOS
Obrigado!
Ok, i am tempted to try Overcome.
Do you suggest me to read anything else than [Jun27][GSM][Kernel][Gingerbread][P1000L/N]?
http://forum.xda-developers.com/showthread.php?t=1124224
agradecido
ecb5 said:
Obrigado!
Ok, i am tempted to try Overcome.
Do you suggest me to read anything else than [Jun27][GSM][Kernel][Gingerbread][P1000L/N]?
http://forum.xda-developers.com/showthread.php?t=1124224
agradecido
Click to expand...
Click to collapse
That's it. Read the last page of the thread. rlkalves just flashed Gingerbread.
Always use original USB cable from Samsung for flashing. Don't use USB HUBs. Make sure you have a good tight USB port, make sure your Windows and USB Drivers are all 100% and close all software to run ODIN or Heimdall ALONE.
i got a p1000n from comcel (colombian provider) and i flashed overcome, and is pretty awesome, maybe if you want i can make you a guide
Hey AlRoger, did you get any success installing a custom rom on our brazilian tab without loosing the TV?
arilsongomes said:
Hey AlRoger, did you get any success installing a custom rom on our brazilian tab without loosing the TV?
Click to expand...
Click to collapse
No TV yet for Gingerbread. I don't watch TV.. I watch ANYTHING on my droid, hehehhe.
farik said:
i got a p1000n from comcel (colombian provider) and i flashed overcome, and is pretty awesome, maybe if you want i can make you a guide
Click to expand...
Click to collapse
Very nice of you.
It is now installed
Gracias por la oferta.
alroger said:
No TV yet for Gingerbread. I don't watch TV.. I watch ANYTHING on my droid, hehehhe.
Click to expand...
Click to collapse
Thanks alroger for all help provided.
I did install Overcome Hermes but overlooked the fact that there is still not usb connection to pc. Al sd cards and browse.though from kies i am able to get into internal and external
What is the procedure to go to another gb rom like Jupiter?
Is it a matter of repackaging the Jupiter's zip with latest zImage from first post and install via sd card with Recovery Cwm mode?
Restart from begining with stock Froyo?
Wait for Humberto to work on it?
For CM7?
From hermes do i directly
Download CM7 Beta
Uncompress .zip file and replace zImage.
Use Heimdall to flash it.
OK, so I`ve installed this ROM and it was very easy to do. However, what am I supposed to "see" different? My "settings" screen looks the same and not the same as the screenshot in the forum (Overcome 10.1 Series v2.1.1). Also,I can confirm I`m on Overcome 10.1 Series v2.1.1 since the about device screen tells me. I`ve seen the changelog etc but don`t fully understand the differences to the standard Samsung ROM. Also, now it`s a custom ROM, will this allow me to charge via USB (from PC) or do I need to enable something to allow this? Sorry for the noobs question!! Ta
okeycokey said:
OK, so I`ve installed this ROM and it was very easy to do. However, what am I supposed to "see" different? My "settings" screen looks the same and not the same as the screenshot in the forum (Overcome 10.1 Series v2.1.1). Also,I can confirm I`m on Overcome 10.1 Series v2.1.1 since the about device screen tells me. I`ve seen the changelog etc but don`t fully understand the differences to the standard Samsung ROM. Also, now it`s a custom ROM, will this allow me to charge via USB (from PC) or do I need to enable something to allow this? Sorry for the noobs question!! Ta
Click to expand...
Click to collapse
Since Overcome doesn't have any extra themes or anything, you won't "see" anything different. You probably noticed that some of the applications you had are now gone (the ones installed by your carrier etc.) and that you now have root access (superuser application). It also has an extended power menu, allowing you to reboot to recovery and download mode directly.
There are also some other changes that you can't see, like the ROM being zipaligned and deodexed - those changes cannot be "seen", but they should make the ROM run smoother. Also, if you updated from stock 3.1 or something, you're now on android 3.2.
As this ROM has a stock kernel, it will not allow you to charge via USB, for that you will need pershoots kernel (look in the development part of the forums or click the link in my sig ). After you flash the kernel, you'll also need to enable USB charging. Again, search is your friend here, I think there is even a sticky that has all the info needed.
Thanks for the reply.Excellent!
No problem, if you have any other questions I'm sure someone will have the answer .
Oh and feel free to click the "thanks" button ;-)
okeycokey said:
OK, so I`ve installed this ROM and it was very easy to do. However, what am I supposed to "see" different? My "settings" screen looks the same and not the same as the screenshot in the forum (Overcome 10.1 Series v2.1.1). Also,I can confirm I`m on Overcome 10.1 Series v2.1.1 since the about device screen tells me. I`ve seen the changelog etc but don`t fully understand the differences to the standard Samsung ROM. Also, now it`s a custom ROM, will this allow me to charge via USB (from PC) or do I need to enable something to allow this? Sorry for the noobs question!! Ta
Click to expand...
Click to collapse
i too have overcome v2.1.1, usb charging is working fine but it will be slow (it was same when i had stock rom without rooting) dont know i see in some thread people raising this issue.
nightmarebadger said:
Since Overcome doesn't have any extra themes or anything, you won't "see" anything different. You probably noticed that some of the applications you had are now gone (the ones installed by your carrier etc.) and that you now have root access (superuser application). It also has an extended power menu, allowing you to reboot to recovery and download mode directly.
There are also some other changes that you can't see, like the ROM being zipaligned and deodexed - those changes cannot be "seen", but they should make the ROM run smoother. Also, if you updated from stock 3.1 or something, you're now on android 3.2.
As this ROM has a stock kernel, it will not allow you to charge via USB, for that you will need pershoots kernel (look in the development part of the forums or click the link in my sig ). After you flash the kernel, you'll also need to enable USB charging. Again, search is your friend here, I think there is even a sticky that has all the info needed.
Click to expand...
Click to collapse
This helps. Been searching for solutions for enable USB charging on Overcome ROM. Was not dare to simply flash Pershoot kernel but sounds working great on u so will do try it. Thanks!!
Recently I found this interesting Tool ... and I successfully flashed "Allminipc_ug802_RT8188_4.4_720p.img" (Kitkat version) on my MK802 III using Debian Linux 7.5!
Regards, mistersixt.
In case someone is interested: I successfully installed the rk3066 drivers for WinXP using Moborobo, rooted the device with the kingo root tool, and I was able to installed the xposed framework 2.6, too, including XPrivacy, root cloak etc.
So I have a fully 4.4.2 running MK802 III with root access and Xposed framework!
Regards, mistersixt.
mistersixt said:
Recently I found this interesting Tool ... and I successfully flashed "Allminipc_ug802_RT8188_4.4_720p.img" (Kitkat version) on my MK802 III using Debian Linux 7.5!
Regards, mistersixt.
Click to expand...
Click to collapse
Very interesting..Any chance you could share the firmware image file and also let us know how has it been so far...is it fast enough and does the Wifi and Camera (UVC drivers compatible) work w/ this ?
Also could you confirm if this is for MK802III and not MK802IIIS...
Cheers
optimus975 said:
Very interesting..Any chance you could share the firmware image file and also let us know how has it been so far...is it fast enough and does the Wifi and Camera (UVC drivers compatible) work w/ this ?
Also could you confirm if this is for MK802III and not MK802IIIS...
Cheers
Click to expand...
Click to collapse
It is the MK802III, and the stick is running fast and stable. Wifi is as bad as with 4.1 ... but I think this is a general (or hardware related) issue, I am using it with a USB to LAN adapter anyway.
Concerning the camera I have no idea.
Regards, mistersixt.
mistersixt said:
It is the MK802III, and the stick is running fast and stable. Wifi is as bad as with 4.1 ... but I think this is a general (or hardware related) issue, I am using it with a USB to LAN adapter anyway.
Concerning the camera I have no idea.
Regards, mistersixt.
Click to expand...
Click to collapse
Hi,
Thanks for your response.
I've just installed this firmware on my MK802III and it seems no audio video app is working properly. Youtube does not show any video or sound. Neither can I play youtube in the browser.
No streaming media player works either. Only the local media files are playing properly.
The playstore seems to take ages to install apps because of speed, however when I check the internet speed using speed testing app it gives a good enough speed of 7Mbps.
Also i've noticed that there the wifi network connections are getting dropped abruptly. The wifi connection itself seems to be OK but connection from apps such as Airdroid drop out and upload from my local machine via Airdroid takes ages w/ speeds in Kbps.
Can this be fixed please.
Thanks,
OP
optimus975 said:
Hi,
Thanks for your response.
I've just installed this firmware on my MK802III and it seems no audio video app is working properly. Youtube does not show any video or sound. Neither can I play youtube in the browser.
No streaming media player works either. Only the local media files are playing properly.
The playstore seems to take ages to install apps because of speed, however when I check the internet speed using speed testing app it gives a good enough speed of 7Mbps.
Also i've noticed that there the wifi network connections are getting dropped abruptly. The wifi connection itself seems to be OK but connection from apps such as Airdroid drop out and upload from my local machine via Airdroid takes ages w/ speeds in Kbps.
Can this be fixed please.
Thanks,
OP
Click to expand...
Click to collapse
bumping this up..!
can confirm, that works great on Measy U2A.
MK802IIIs up and running
Works brilliantly on my MK802IIIs. Wifi is strong and Bluetooth works out of the box. Already rooted and CWM recovery installed. Now its time for some Xposed magic! Anyone has an idea which XBMC version will run best on this?
I'm using the ROM from this thread http://freaktab.com/forum/tv-player...73-full-1080p-modded-kit-kat-4-4-2-rk3066-rom
Super fast and stable, its like a new machine coming from the old JB ROM I had on there. I can actually use it now.
This ROM is for an Imito device but the MK802IIIS is identical hardware.
Few OC kernels in that thread to to play with.
ozzy lion said:
I'm using the ROM from this thread
Super fast and stable, its like a new machine coming from the old JB ROM I had on there. I can actually use it now.
This ROM is for an Imito device but the MK802IIIS is identical hardware.
Few OC kernels in that thread to to play with.
Click to expand...
Click to collapse
Hi,
The rom seems nice but I just can't get it to run correctly on my MK802IIS. I just flashed the rom on this thread (V 1.1 ) without flashing a custom kernel. Just flashed the entire rom. And after the first boot, I see the apps update (the optimization screen) and then I'm stuck on the screen where there is an Android icon on the top with a blue bar underneath. This screen just keeps blinking and seems to be impossible to pass. I can access the settings, but I found impossible to activate wifi or lan.
Ozzy, you seem to have a MK802IIIS, did I miss something during the flashing? Do I need to flah a custom kernel after flashing the rom?
Linkysly said:
Hi,
The rom seems nice but I just can't get it to run correctly on my MK802IIS. I just flashed the rom on this thread (V 1.1 ) without flashing a custom kernel. Just flashed the entire rom. And after the first boot, I see the apps update (the optimization screen) and then I'm stuck on the screen where there is an Android icon on the top with a blue bar underneath. This screen just keeps blinking and seems to be impossible to pass. I can access the settings, but I found impossible to activate wifi or lan.
Ozzy, you seem to have a MK802IIIS, did I miss something during the flashing? Do I need to flah a custom kernel after flashing the rom?
Click to expand...
Click to collapse
I just flashed the basic ROM with the unmodified kernel. I did try one of the OC kernels but it wasn't stable on my device.
The screen you mention doesn't sound familiar to me.
Did you do a full wipe?
ozzy lion said:
I just flashed the basic ROM with the unmodified kernel. I did try one of the OC kernels but it wasn't stable on my device.
The screen you mention doesn't sound familiar to me.
Did you do a full wipe?
Click to expand...
Click to collapse
Hi, thanks for your answer mate
Yeah I did a full wipe, that's why I don't understand what's happening to me. I see someone on the thread has the exact same problem, but doesn't precise on which device, so I preferred to ask you first, as we have the same device.
I'll just try the v.1.0, mabe that 1.1 version doesn't run on my key. Did you flash the 1.1 or the 1.0 ?
Hello
I know I am a bit off topic but this TV stick is based on the same CPU....Can somebody help me ?
I ordered this
http://www.ebay.co.uk/itm/Dual-Core...g-/111655649656?ssPageName=ADME:X:RTQ:GB:1123 and seller's understanding of the English language is very close to none
Can somebody tell me which webcam models does it support ?
I have just installed Allminipc_ug802_RT8188_4.4_720p on an MK802III. I have used it for an hour and installed all my apps etc.
Both sound and Wifi (Realtek) seems to work.
I've been using mine daily since I posted last time. It works fine except for some hick ups.
Sometimes during bootup it hangs with just 3 penguins on the screen.
And I'm running out of internal disk space all the time. I never did that on the official 4.2 even though I had many more applications installed then. Any ideas how to fix that?
Help please...
I have : BOARD
MK802IIIS
BOOTLOADER
unknown
BRAND
MK802IIIS
CPU_ABI
armeabi-v7a
CPU_ABI2
armeabi
DEVICE
MK802IIIS
DISPLAY
MK802IIIS-eng 4.2.2 JDQ39 eng.zs.20140312.150142 test-keys
FINGERPRINT
MK802IIIS/rk30sdk/rk30sdk:4.2.2/JDQ39/eng.zs.20140312.150142:eng/test-keys
HARDWARE
rk30board
HOST
hotack-desktop
ID
JDQ39
MANUFACTURER
rockchip
MODEL
RKM MK802IIIS
PRODUCT
MK802IIIS
SERIAL
FKO0EQZQGR
TAGS
test-keys
TYPE
eng
UNKNOWN
unknown
USER
zs
CODENAME
REL
INCREMENTAL
eng.zs.20140312.150142
RELEASE
4.2.2
SDK_INT
17
Its rooted just need to know how to UPGRADE THIS TERRIBLE DEVICE....
Q&A for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Paranoid Android 4.4
Hello!
first of all, thanks for your work. :good:
I would like to try the patch but I don't know which version to choose: I have a Paranoid Android 4.4
Could you help me?
Wifi Crash, Media Crash, Settings "Storage" Crash
Hey guys, I'm on PA 4.6 BETA5, when I flash the aosp or franko kernel (after going back to stock kernel before flashing the new one) my Wifi won't enable, android.something.media crashes and in the settings app, when I tap storage the app crashes...any way to solve this problem or an alternative? Thanks!
PS: I'm really sorry if this was asked before, I read the hole last 10 sites of the forum and didnt found anythings related to my problem, "just" 10 sites because I think its related to 4.4.4 and maybe PA.
Which OTG mod to download for stock 4.4.4?
Which OTG mod to download for stock 4.4.4? There are so many I can not figure out what is the correct one to use.
OTG Android Lollipop
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
piedra96 said:
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------
I have looking and I think that it isn't incorporate in the stock kernel. So, anything to Android 5.0?
thanks
Click to expand...
Click to collapse
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Stock Lollipop
A zip file where i can make a modification to my stock kernel on the N4! I want to use the stock for a few days to test it!
pm_dsp_ra said:
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Click to expand...
Click to collapse
mm okey! so, have you test Hells Doctor on Lollipop? I will try out it this afternoon. I'm running a 4.3 stock perfectly with the otg, but Lollipop look like so excited.
Lollipop
Is there a patch for android lollipop for OTG support? I have franco.Kernel installed.
Lollipop
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
dangerelvis said:
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
Click to expand...
Click to collapse
I have no idea! I have tested Hells Doctor and Hell Core kernels on my Nexus 4 running Stock Lollipop and anyone work. :crying: :crying:
Anyone tried this patch on stock Lollipop kernel? Does it work?
How does one "Simply install the zip in recovery"?
My screen is broken (just the touch; everything is still visible). I was hoping I could install this mod without being able to touch the lower half of my screen so that I could plug in a mouse so that I could copy some files off my device.
I can reboot into recovery mode, but USB debugging is *not* enabled. I've never used "adb" on this device before (I just says "offline" when I try to run it from my PC).
I have no idea how to "install a zip".
Phone is an Nexus 4, running android 4.something.
OTG on Paranoid 4.6 beta 6
Hello,
When I flash the kernel (R199) and the system load I can't turn on the wifi and every time I enter the storege settings they crash.
also tried the other versions of the kernel, no help.
please help.
Thanks,
Is the OP willing to develop the patch for lollipop too? Or is there any nice kernel with USB host support?
nexus 4 lolipop 5.0.1 and xbox wireless gamepad
Hello. I want use xbox360 wireless gamepad on my nexus 4 lolipop 5.0.1. I think first I need kernel with OTG support. What kernel I can download on 5.0.1 android? I need y-cable for receiver of xbox360. what about mouses and keyboards they also need y-cable?
What can be the problem, why OTG still doesn't work
Hey guys,
however I'm completely new to this stuff, I managed to get through every barriers, and I put Cyanogenmod 11 snapshot M12 on my Nexus 4 and after that flashed the suggested kernel and patch successfully to try out OTG. The phone works withput problem, the installations seem to be successful, therefore I tried to connect an external storage to the phone to check if OTG works on it.
For that, I used a SIMPLE OTG cable like this:
<<<LINK CANNOT BE SHOWN SINCE I AM NEW TO THE FORUM - picture is the second picture of the first post in this thread>>>
connected to an Y-cable SIMILAR to this:
<<<NO LINK AGAIN - the 3rd picture of the first post in this thread>>>
The difference from the one on the picture is that mine has a male mini USB end instead of a female normal USB end as in the picture. My cable is the cable of an external wichester otherwise.
So, I tried with this cable setup, the result was that both the phone and the connected storage received electricity from the external power source, but the storage was not detected by the phone. I had a feeling that it doesn't get enogh power, so I attached it to a USB phone charger just to be sure, but the situation remained the same: the light on the storage was green, which means it is charging, the light on the phone was also on, but the storage was not detected.
My question is if I should try with the exact same cable set that can be found in the first post of this thread on the first picture or mine also should do the job, and there should be still some software related problem?
Please also tell me if you need more information on this to answer it, however I tried to be specific.
Thank you for your help in advance.
Hello. What i can do on lolipop? There is no solution? I have a 32gb flash drive, y-otg cable, standart power adapter micro-usb-male. Rooted nexus4
Which zip I need to download?
Hi, i'm really beggining on Android stuffs, since I didnt had one until the last week, so I'm really in doubt about which one of the zip files i need to install in my system to make the OTG cable work properly.
Once I downloaded a random ziddley zip on the internet and when I installed it in recovery mode, i needed to reinstall the android system on my phone, since the phone wont boot anymore.
So, can anyone help me? I'm sharing in this post a screenshot of the Android Version screen on the settings. I've rooted my phone using the King Root app
Considering that my android version is 4.4.4, I consider that I may download one of the following:
4.4.x: 2013.12.11 1604ET: [fk r199] [fk r199-CM]
4.4.x: 2013.12.06 1445ET: [aosp r7]
But which one?
And just another noob question. Is this the right way to install the ziddley zip on my phone?
(www).addictivetips.com/mobile/how-to-install-a-rom-or-app-from-zip-file-to-android-device-from-recovery/
Sorry for the noob questions and thanks to anyone who helps, because I REALLY need the otg cable to work, so I can develop some things using the XBOX 360 cable!
Removed
Figured this would be the best place to ask, discus or what ever else takes the fancy but I was floating the internet the other day looking up about USB OTG for my T230NU and found this...
A bit of googling didnt seem to pull up the CPU that the Brazilian "NT" varient uses... but what I am thinking is if it uses the same Marvell SoC as the T230 / T230NU would that be something that could be ported?
I Did do a quick forum search before typing this and nothing came up and thought it of potential interest
Anybody looking into this? OTG would be nice. Hate not being able to mount usb storage properly as well.
mkhtfld76 said:
Anybody looking into this? OTG would be nice. Hate not being able to mount usb storage properly as well.
Click to expand...
Click to collapse
OTG support is not available on marvell variants. I don't know if the same holds tru for the sm-t237p which is a qualcomm/msm device
like the tab 4 10.1 and the tab 4 8.0
The same lack of OTG support occurs in the tab 3 line for the 7.0 models, again, marvell.
While the code is present in the kernel source, the actual required hardware components are not present on the board.
So the answer is no.
m
Edit- i do have a question about mounting the tab as usb-storage in recovery, either philz or twrp, does that work ?