Wich a2sd do you use with Aokp?
Sent from my HTC HD2 using XDA Premium App
I'm sure there is a rule that users need to use the search funtion ... but nevertheless ;
HERE is the thread regarding AOKP.....
when u scroll all the way down to post 26 ; Credits for the script and OP of the script found HERE
and bookmark the thread
Gl with it
/salute
I had only problems with A2SD + AOKP (freezing, rebooting etc.), so I now simply use included Link2SD app (just select most hungry apps and move them to SD and you get pretty much same effect).
I currently use 40ad2sdx
It just works..
I have used link2sd and mounts2sd and both just werent as stable and fast..
I currently use 40ad2sdx too
I currently use Darktremor. I flashed the script after the romflash (Milestone 5 SE) without a reboot.
It works fine for me.
I use Link2sd and it works without any problem
Sent from my HTC HD2 using xda premium
using link2sd app from Gplay all works for me
Related
I'm using cm 6.1 nightly 52 its ok but past few days been having loads of freezing so I wanted to now if are able to use the St ap2sd zip any advice welcome
Sent from my HTC Wildfire using XDA App
Just download move2sd enabler from market, no need to format sd .
i tried almost every ICS rom but not able to install a2sd ...plzzz help...a2sd in installin MIUI.us-ICS-Leo-2.4.20 rom....
Try this...
http://forum.xda-developers.com/showpost.php?p=21195341&postcount=207
Amarullz's script is very good.
..But be sure you have already a ext partition on your sd card
If you already have an ext partition try link2sd app. Its free o Gplay and works very well
Sent from my HTC HD2 using xda premium
Make sure to install the latest busybox
Sent from my HTC HD2 using XDA
someone can give me clear guide how to hbstall v6 supercharger?
and the lastest files to download?
thanks!!!
Follow the instructions given on oriiggnal supercharging thread..
Sent from my MB526 using xda app-developers app
anmol7ify said:
Follow the instructions given on oriiggnal supercharging thread..
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
i dont understand what going up there....is messy.....
i have cm9..please help me.....
[QUOTEICS/Jelly Bean Installation Steps - Easy as 1, 2, 3!
1. Install V6 SuperCharger script as always.
....Note: You will probably get Segmentation Fault errors running the V6 SuperCharger script on ICS due to a flakey su (superuser) binary.
.............. Go HERE for a fixed su binary. No more fugly segfaults! - Thanks to wraithdu
...............OR Go HERE and get the SuperCharger Starter Kit!
2. Patch and install services.jar as explained below by whichever method you like best (online with ICS OOM Priority Charger webapp or manually)
....UPDATE! - Latest V6 SuperCharger Update 9 RC9 Tests can do it ALL AUTOMAGICALLY! (Seemless webapp integration which makes your launcher Die-Hard!)
.................. - Just go to the ICS Service Centre and choose Automatic Transmission!
3.SuperClean & ReStart! (ie. Wipe Dalvik Cache & Reboot)][/QUOTE]
credits to http://forum.xda-developers.com/showthread.php?t=991276/
I just copy and paste for you so in which step is your problem?
merhans said:
[QUOTEICS/Jelly Bean Installation Steps - Easy as 1, 2, 3!
1. Install V6 SuperCharger script as always.
....Note: You will probably get Segmentation Fault errors running the V6 SuperCharger script on ICS due to a flakey su (superuser) binary.
.............. Go HERE for a fixed su binary. No more fugly segfaults! - Thanks to wraithdu
...............OR Go HERE and get the SuperCharger Starter Kit!
2. Patch and install services.jar as explained below by whichever method you like best (online with ICS OOM Priority Charger webapp or manually)
....UPDATE! - Latest V6 SuperCharger Update 9 RC9 Tests can do it ALL AUTOMAGICALLY! (Seemless webapp integration which makes your launcher Die-Hard!)
.................. - Just go to the ICS Service Centre and choose Automatic Transmission!
3.SuperClean & ReStart! (ie. Wipe Dalvik Cache & Reboot)]
Click to expand...
Click to collapse
credits to http://forum.xda-developers.com/showthread.php?t=991276/
I just copy and paste for you so in which step is your problem?[/QUOTE]
with the binary....you can give me download too?
elyashiv1994 said:
i dont understand what going up there....is messy.....
i have cm9..please help me.....
Click to expand...
Click to collapse
It's true, this thread is horrible, impossible to understand a word about what it's said...
Are you able to run the script and only the ics stuff is to much or is it the whole thing?
Sent from my MB525 using XDA App
The binary is attached anywhere just push crtl+f write binary and search the post through
Hope you understand. I am at work so brain only thinks German ^^
Sent from my MB525 using XDA App
There is an starter kit witch contains an starterkit.sh witch you can start with this procedure:
1a.download starter kit(unzip)
1b .download supercharger.pdf and rename it to .sh
2.install terminal emulator and open
3.navigate to the folder witch contains the starterkit.sh and
4.Type in: StartMeUp.sh or sh.StartMeUp and follow the instruktions
5.After reboot navigate in terminal to the V6Supercharger.sh and
6.type in sh.V6*.sh and follow the instruktions
Dont forget to be a superuser !
Cheers
Sent from my MB526 using xda app-developers app
bone101 said:
There is an starter kit witch contains an starterkit.sh witch you can start with this procedure:
1a.download starter kit(unzip)
1b .download supercharger.pdf and rename it to .sh
2.install terminal emulator and open
3.navigate to the folder witch contains the starterkit.sh and
4.Type in: StartMeUp.sh or sh.StartMeUp and follow the instruktions
5.After reboot navigate in terminal to the V6Supercharger.sh and
6.type in sh.V6*.sh and follow the instruktions
Dont forget to be a superuser !
Cheers
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
I did it backwards ....
i first install v6 and then the starter kit..its ok?
Yes if it works
Sent from my MB526 using xda app-developers app
bone101 said:
Yes if it works
Sent from my MB526 using xda app-developers app
Click to expand...
Click to collapse
i dont see any change....i still have low ram....
The difference is just bit smoothness......
Sent from my MB526 using xda app-developers app
Questions go in the Q&A section
I have trying to install v6 supercharger om my phone a lots off times now and i only get "applet not found". I have cm 7.2 what can be wrong.
Sent from my MB525 using xda app-developers app
fjuttrik said:
I have trying to install v6 supercharger om my phone a lots off times now and i only get "applet not found". I have cm 7.2 what can be wrong.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Before installing install fixed busybox and su.
Sent from my ICS Defy
I have busybox v.1.19.3 stericson i think its included in CM 7.2 how can i update it and CM still working.
I have read that install a new busybox messes upp cm.
Sent from my MB525 using xda app-developers app
fjuttrik said:
I have busybox v.1.19.3 stericson i think its included in CM 7.2 how can i update it and CM still working.
I have read that install a new busybox messes upp cm.
Sent from my MB525 using xda app-developers app
Click to expand...
Click to collapse
Find the wraithdu's busybox in the V6 Thread. Install it, it won't affect your CM7.
neo.ank said:
Find the wraithdu's busybox in the V6 Thread. Install it, it won't affect your CM7.
Click to expand...
Click to collapse
It dont work i get the "applet not found" when i try to run the busybox script. I try both the smanager and the terminal.
Sent from my MB525 using xda app-developers
Then use the CWM flashable zip.
Use 1.19.4
This is LoveCrya4 by angeeks edited by me. It's a CM7 based rom.
Changed status bar
Changed lockscreen
Changed font
Removed chinese apps and replaced with english verisons
Added espier browser modded by me
Replaced ilauncher with espier launcher
Added iphone style apps
Rom
http://www.mediafire.com/download.php?em3x03wv1xsbh1d
Google apps
http://www.mediafire.com/download.php?5fb2cok8laywchx
Based on cm7 what? Vo-1 or official?
Sent from my GT-S5830 using xda premium
ill give it a try
Kindly remove the warez (Root Explorer).
What browser is contained? Espier?
Sent from my GT-P7300 using xda app-developers app
Forgot to mention that there is also AI type keyboard plus which is also a paid app.
Sent from my GT-S5830 using xda premium
It's only in english ?
Screenshots look good :good:
Any known bugs?
whats the battery like?
Thread reopened.
Where is the download link.. ?
Sent from my GT-S5830
athe_s said:
Where is the download link.. ?
Sent from my GT-S5830
Click to expand...
Click to collapse
The OP needs to upload a warez free package.
Sent from my GT-S5830 using Tapatalk 2
athe_s said:
Where is the download link.. ?
Sent from my GT-S5830
Click to expand...
Click to collapse
He haven't uploaded it yet, obviously.
Added new links
Can you pleeeeeaaaaseeee port this rom to gio?
Sent from my GT-S5660 using xda premium
What A2SD script that you used...?
How to uninstall the A2SD script? Is it just delete it from init_d?
Because i used to use cronmod script..
And the keyboard used chineese letter.. how to change it into english letter
Sent from my GT-S5830
athe_s said:
What A2SD script that you used...?
How to uninstall the A2SD script? Is it just delete it from init_d?
Because i used to use cronmod script..
And the keyboard used chineese letter.. how to change it into english letter
Sent from my GT-S5830
Click to expand...
Click to collapse
I think it's darktremor's a2sd. You don't need to delete them. They're just the same with cronmod. After you flashed the ROM it's automatically linked in your sd-ext. You can check it by installing A2SDGUI
Kakashi Hatake said:
I think it's darktremor's a2sd. You don't need to delete them. They're just the same with cronmod. After you flashed the ROM it's automatically linked in your sd-ext. You can check it by installing A2SDGUI
Click to expand...
Click to collapse
I used int2ext4 and totaly diff then a2sd.
Btw thx for the info..
Sent from my GT-S5830 using xda premium
athe_s said:
I used int2ext4 and totaly diff then a2sd.
Btw thx for the info..
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Download darktremor script and then open it with Winrar. Go to the folders and see what are the files included in the script. Delete that files on the ROM.
Kakashi Hatake said:
Download darktremor script and then open it with Winrar. Go to the folders and see what are the files included in the script. Delete that files on the ROM.
Click to expand...
Click to collapse
i have the file. but it was to many to delete. i need an uninstaller script... or for a while i used dta2sd.
Sent from my GT-S5830
My Rev
1. love the UI.
2. notif ok
3. lock screen ok
4. wifi theter not working (mobile hot spot) "no internet connection"
is this only me? or .... please someone reporting this..
5. don't like the keyboard. i change it manually
6. wifi not tested yet...
Sent from my GT-S5830
Is there any way to reduce booting time? I am using Creed rom 3.5. At the very beginning I install creed rom it was ok. But now it takes long time to restart my SGY.
Any Suggestion?
Thanks.
remove a2sd, data2sd if you are using it
search on play store
startup manager, it lets you customize which apps run on startup (may cause FC's)
remove useless apps
Thanks bro.
I am using app2sd pro. It helps me. Do u think it makes my phone slow?
Btw creed v3.5 has an inbuilt startup manager. I tried to stop apps by it. But nothing changed.
Sent from my GT-S5360 using xda app-developers app