Database Users

New Wildfire

Hi,
I'm on Amsterdam and wanna buy wildfire for my girlfriend.
Does all boot loaders out there currently can be rooted ? (its a must since i have to use 2.2 for the hebrew)
Thanks,
Chura

only the CHS Froyo isnt rootable
RUU_Buzz_Froyo_HTCCN_CHS_2.10.1400.3_Radio_13.53.55.24H_3.35.19.25_release_151119_signed.exe
sad part is, thats the only official froyo for wildfire yet..

Chura said:
Hi,
I'm on Amsterdam and wanna buy wildfire for my girlfriend.
Does all boot loaders out there currently can be rooted ? (its a must since i have to use 2.2 for the hebrew)
Thanks,
Chura
Click to expand...
Click to collapse
if you need root and hebrew, root the stock 2.1 rom with unrevoked and install wildpuzzle

Hi, Thanks.
So how can i be sure that my device will be rootable prior to the purchase (while in shop) ?
And thanks for the tip.

how to install the rom with ".EXE" extension ???

seshvasan89 said:
how to install the rom with ".EXE" extension ???
Click to expand...
Click to collapse
plug phone into computer, turn usb debugging mode on and run it.

I wouldn't reccomend rooting whilst in the shop
Sent from my HTC Wildfire using XDA App

brilldoctor said:
I wouldn't reccomend rooting whilst in the shop
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
That would be cool, standing in the shop and rooting the fresh buyed phone in front of the salesmen.

Warlord711 said:
That would be cool, standing in the shop and rooting the fresh buyed phone in front of the salesmen.
Click to expand...
Click to collapse
ha
that's what i did couples of week ago in an apple store when there are releases their ipone 4 and i did jailbreak one of those phone not in front of salesman but inside of that apple store when there are not released yet ios 4.01

No guys.
Ive found one at tmobile here.
I should be able to root it (home) or i need to check something on the box at the shop?

Anyone ? i have few more hours here...

Chura said:
No guys.
Ive found one at tmobile here.
I should be able to root it (home) or i need to check something on the box at the shop?
Click to expand...
Click to collapse
Just check what software version it's running. 99% positive it'll be 2.1, in which case it can be rooted, incredibly easily, by following here: http://forum.xda-developers.com/showthread.php?t=788776
Then if you want Froyo, flash either WildFire or Puzzle. Or wait a bit for CyanogenMod.

say if i install this unrootable official froyo ROM (RUU_Buzz_Froyo_HTCCN_CHS_2.10.1400.3_Radio_13.53.5 5.24H_3.35.19.25_release_151119_signed.exe) and will I be able to install the custom ROMs available later ???

seshvasan89 said:
say if i install this unrootable official froyo ROM (RUU_Buzz_Froyo_HTCCN_CHS_2.10.1400.3_Radio_13.53.5 5.24H_3.35.19.25_release_151119_signed.exe) and will I be able to install the custom ROMs available later ???
Click to expand...
Click to collapse
No, your phone need to be rooted for the custom rom to work/flash..

As long as its running 1.25 or lower its rootable
Sent from my HTC Wildfire using XDA App

Unroot

Hi i have a galaxy i9000 and rooted it a few months ago but would like to unroot it as i have to put it in for repair , i have 2,6,32,9 [email protected] no1 in my kernel version , can anyone tell me how i unroot the phone as i have searched the forums and cant find a simple answer.
cheers john

I think you can do it with oclf, just install from market. Or use z4root.
Sent from my GT-I9000 using XDA App

cheers but i thought z4root only unroots eclair 2.1 but roots froyo ??

[q] my phone is bricked!! Help!!

I was installing Root explorer and my phone restarts and enters bootloop. I am a noob. Please help me with intructions on how to unbrick my phone. I can only enter FTM mode. HELP HELP.

I'm afraid you'd have to recover using adb,fast boot or even a tpt with cwm.
Sent from my ZTE Blade using XDA app

There's a debricking guide on ModaCo. Check it out
Sent from my Supernatural Blade

Go to Google, and type 'zte blade firmware'....Click on the first link (modaco), and follow those instructions...
In short:
You will need to flash the firmware, and install a custom rom...
I had been in this situation, so I know...No worries..

there is a guide on modaco to fix your phone from FTM Mode i had a similar problem and that guide was great at fixing my phone mate give it a try

As you guys said , i went through this .. http://android.modaco.com/topic/339048-guide-flashing-firmware-to-bladelibra-via-windows/
But cant understand step 8 and 9. First they say cwm 5.0.0.2 is the version for gen 2 and then flash 4.0.05 again?

Yes, when i flashed my phone for the first time i flashed 4... and then had to re flash back to 3.0.2 because that is the version that works best for my phone.

Okay so i got it to work. Its 5.0.0.2 for my phone, since i got a Gen 2 phone. But i want Dell stock firmware Android 2.2 Where can i get it?

Tusharkamath said:
Okay so i got it to work. Its 5.0.0.2 for my phone, since i got a Gen 2 phone. But i want Dell stock firmware Android 2.2 Where can i get it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1530009

That link has expired. Any other links? Now since i have a custom rom on my phone. How do i install the stock rom without bricking my phone?

My phone is fixed. Thanks to allll you replied. Thank you

Tusharkamath said:
My phone is fixed. Thanks to allll you replied. Thank you
Click to expand...
Click to collapse
Its okay fella....Glad v could help....

I A fried has a problem his phone (XCD 35) is bricked and it wont pass the green android logo it just blinks at the screen, No recovery or any other screen what ever key combination he only gets the green logo.
Any help ?

rkkaranrk said:
I A fried has a problem his phone (XCD 35) is bricked and it wont pass the green android logo it just blinks at the screen, No recovery or any other screen what ever key combination he only gets the green logo.
Any help ?
Click to expand...
Click to collapse
Use the Modaco thread in one of the above posts.
Sent from my ZTE Blade using XDA app

[Q] How do i restore whole phone? (recovery, ROM, tpt)

Hello so i have coldfusionx13 ics installed on my blade. But i am getting problem with my screen also some gps trouble, i know its impossible to fix it. Cause i been tested tons of ROM but same problem. So i want to return it to the store.
How tha **** do i restore EVERYTHING? (ROM, Tpt and all other ****.)
I want original stock ROM.
My Blade before installing custom ROM
ZTE blade Sweden, TELIA
Android version 2.3.5
GEN 2/3
So please help me.
I been cheking the stock rom thread but don't know whitch one is for my phone :S
Thanks alot guys!

Please over 100 views and no reply????!

have been answered 100's of time just search

Yeah i know, but can't find any with tut, but can you link me to the right stock ROM for me? TY if u can.

search yours here
http://forum.xda-developers.com/showthread.php?t=1353526

As i said
I been cheking the stock rom thread but don't know whitch one is for my phone :S
Click to expand...
Click to collapse
BUT, i did download official 2.2 froyo! dunno if its stock ROM for my ZTE blade, but how do i update it to 2.3.5 offical?

MrKiller2010 said:
As i said
BUT, i did download official 2.2 froyo! dunno if its stock ROM for my ZTE blade, but how do i update it to 2.3.5 offical?
Click to expand...
Click to collapse
not worth to update to official 2.3 u will be unrooted and it will be very difficult to root back instead use swedish snow.
i want more info like your country your carrier u have a european or chinese blade??

I got 2.3.5 now. Alwo i know exacly how to root it.
I still need to know if its tha right cause i will go to the sstore with it
Its european. Gen2/3 bought from telia.(sweden)
Sent from my ZTE-BLADE using xda premium

[Q] How to check version of ZTE blade without ROM

Hi.
My friend "bricked" his ZTE Blade.
We want to try unbrick it, but we must find what version of Blade it really is (I (gen1/gen2, II...).
We can't get also in recovery/FTM/fastboot
Is there any way to do it? (we can't run the pigfish apk....)
Thanks

Ask him what version of android he had on it,
generally speaking if it came with android 2.1 it'll be gen1 and if it came with 2.2 it'll be gen2, there have been reports of users having 2.2 gen1 but 99% of the time you can rely on this. that's why blade checker and ask mr pigfish have to check details in the kernel to establish if it is gen1 or gen2 but considering it is bricked this is what you'll have to go on

OK, thanks, I will ask.
I think that he flashed bad gen version of CM7.
I hope that we can solve it with TPT (phone still boot into green android) but I'm afraid that with flashing bad TPT we can totally brick it...
BTW ZTE Blade gen2 is different from Blade II right?

Benik3 said:
OK, thanks, I will ask.
I think that he flashed bad gen version of CM7.
I hope that we can solve it with TPT (phone still boot into green android) but I'm afraid that with flashing bad TPT we can totally brick it...
BTW ZTE Blade gen2 is different from Blade II right?
Click to expand...
Click to collapse
If he flashed anything above CM7.0.0 and it doesn't boot, he'll have a gen1, I think CM7.0.0 is the only gen1 official CM.
Have you tried booting into recovery? Power on with volume down if I remember correctly. If not try volume up.
Yeah ZTE blade gen2 is different from the Blade 2
Sent from my LT30p using Tapatalk 2

OK.
Yes, he tried to boot it with vol+/- or also with home button, but nothing.
Also I must ask, if it wasn't CM7.2, thats for gen2 right?
I didn't have the phone in my hand yet. Maybe next week...

Benik3 said:
OK.
Yes, he tried to boot it with vol+/- or also with home button, but nothing.
Also I must ask, if it wasn't CM7.2, thats for gen2 right?
I didn't have the phone in my hand yet. Maybe next week...
Click to expand...
Click to collapse
CM7.2 is gen2 only, was that the one he flashed?
If so he will have a gen1 phone as if it isn't booting then it must be that.
Sent from my LT30p using Tapatalk 2

New info
He tried to flash CM7 via original recovery manager.
Also he said, that in Czech Republic isn't gen1, so it should be gen2...

Benik3 said:
New info
He tried to flash CM7 via original recovery manager.
Also he said, that in Czech Republic isn't gen1, so it should be gen2...
Click to expand...
Click to collapse
Via rom manager? Okay so if you're sure it's gen2 try flashing a gen2 compatible TPT or if you can get into fastboot make sure to flash a gen2 compatible recovery
Sent from my LT30p using Tapatalk 2

Yeap, we will try it, thanks for help!