Corrupted data file on Tytung's ICS SD - HD2 Android Q&A, Help & Troubleshooting and Genera

Hello everyone,
I have been using tytung's ICS SD build since the very beginning, I had about 120 apps installed and I was really happy with that build. Yeah, it did restart out of blue sometimes, but I was used to it.
But after I took the battery out yesterday (because the phone was lagging like a snail), it didn't turn back on. I left it on charger for the night, hoping it is just temporary, but I woke up to see the bootanimation again.
I have already tried to upgrade to 2.0 (I've used 1.5 then), but with no results. I mean, when I used a new data.ext4 file everything went smooth, no, damn smooth. Still, I would prefer to use my old data file. Is there any way of "repairing" it or at least copying the files from it?
Sorry if it was already mentioned, I've browsed through about 20 pages of threads and didn't find anything which could help me.
Thanks in advance!

Related

Android installation guide and tips.

First thing, If you smoke, go grab your smokes, if you drink coffee, go grab a cup. This is usually a painless process but not always.
You will need HSPL installed, as well as a Class 4 or better sd card.
Before i begin i want to thank the following; with out them it would not be possible.
cr2
NetRipper
dcordes
Markinus
LeTama
Cotulla
dan1j3l
tsamolotoff on s200
Parad0XUA
Cass
http://forum.xda-developers.com/showthread.php?t=719646
THANKS GUYS!!
What you will need is the installation copy of the build that you will be using, the latest zImage and your sdcard.
The latest Android build can be found here: Its under the standard builds section.
http://gamesquare.co.uk/
And the latest Zimage can be found here:
http://cotulla.pp.ru/leo/Android/
I personally recommend the dan1j3l's Froyo build.
Down load both the zimage and the build.
Format your sdcard, select default settings and unselect the quick format option.
After the formatting is done (about 20 mins)
extract the contents of the Froyo build to your sdcard.
Located in the folder "android" you will find a file names zimage, replace it with the one you downloaded.
WITH YOUR USB PLUGGED INTO A POWER SOURCE, reboot your phone.
As soon as you can, using the built in file manager if u have one, navigate to the android folder, select the program CLRCAD, (it will not do anything that you can see)
Then select the Zharet program.
Lay the phone down!
Sit back and wait, you will see text fly across the screen, the flash might flash, screen might fade and then come back.
Once linux is done loading and mapping out the hardware, android should be up and running.
Sign in to google and your contacts will sync if you have any on there.
Android is not perfect yet BUT it has come an amazing way since the beginning of the month.
I am using the current settings in WM, if you can do the same and you should have no problems.
SA TMOBILE HD2
HSPL2, I know HSPL3 is/has been out and is recommended, but is there any advantage in using it, i don't want to change if i don't need to
Radio 2.10.50.26
O.S. 5.2.21908 (21908.5.0.93)
Manila 2.5.20161332.0
Energy.Leo.21908.Sense2.5.Cookie.Jul.16 (absolutely love the energy roms, always updated and he includes the program to back up all settings making the update flashes a pleasant experience)
i ALWAYS TASK 29 before all roms!
CLASS 4 or better sd card.
When ever you want to load android, you must do so by selecting the two files mentiond above after a clean boot and always clrcad.exe first.
Sometimes android will not boot correctly, remember it was not designed for this phone.
Also all settings you make, programs you download, ect will stay in android
Pictures and such will be shared between android and wm.
Trying...
I'm installing it now per your instructions. A couple of concerns you might be able to help me with. I could not find the program CLRCAD in any folder, ok I couldn't find an android folder either. I went to my SD card where I had extracted the froyo & copied over the Zimage, I didn't see a Zharet program but I did see a haret file that looked like a program so I clicked on it and it started to download Linux! I hope I did it correctly even though it seemed slightly different. am I going to run into trouble not having run the CLRCAD?
Thanks for all your hard work.
Guess I answered part of my question. It did not install correctly. I'll look for a CLRCAD and retry.
cant believe im back in the winmo forum once again.ran HARET froyo last night on my HSPL2 Leon RoM,and wow.with wifi i was browsing,playing 3d games(flawless compare to my EVO 30fps capped),and watching youtube.really loving it.glad no one bought my HD2 but now its a keeper.
BigB4400 said:
I'm installing it now per your instructions. A couple of concerns you might be able to help me with. I could not find the program CLRCAD in any folder, ok I couldn't find an android folder either. I went to my SD card where I had extracted the froyo & copied over the Zimage, I didn't see a Zharet program but I did see a haret file that looked like a program so I clicked on it and it started to download Linux! I hope I did it correctly even though it seemed slightly different. am I going to run into trouble not having run the CLRCAD?
Thanks for all your hard work.
Guess I answered part of my question. It did not install correctly. I'll look for a CLRCAD and retry.
Click to expand...
Click to collapse
I Found CLRCAD ( I think I was just a little sleepy last night when I was trying this) I ran it and it loaded correctly. Wow it seems to run great! I am running Touch-X Extreme ROM and have some issues with the phone(it doesnt work, I have no antenna). I will try loading energy's rom (since so many people have got the phone to work well with his) and see how well it works out.
Good luck!
Do we really need to format our SD card? If we don't what would happen to the data already on there?
is the "zimage" provided for both dan's froyo and desire v4?
which files do i replace with the new zimage?
After a few days of use, this build seems to run fine. Except for a few things. 1) my phone tends to run real *hot* after using Android. And second, after about 5 min of idling the screen goes black and there seems like there's nothing I can do about except to reboot. I can't even push any of the bottom buttons, that doesn't work either. on. It will run just fine as long as I don't let it sit to long without touching the screen. Is this normal or am I doing something wrong? I can't wait for a even more stable build.
why cant i sign into google and other networks and why is it running overclocked? help me out yall got daaaamn lol. thanks
Is Paradoxua's Froyo build more stock than daniel's? Because daniels' uses ADW, which I'm not too fond of.
Also, is anyone else experiencing weird scrolling issues? Like you flick down a list and it's supposed to go flying down, but it only goes down like a tiny bit.
Another issue, when the screen turns off while you're connected to PC, the phone seems to disconnect too. I assume this is a WinMo issue because in WinMo when you connect your phone to your PC the screen is always on.
Thread moved to General.
i got my hd2 to load android just fine.. but the screen is very dim.. any ideas??
maybe you can toggle the backlight settings in winmo.. idk. it works for the tp2.
I always get the green screen or death or it enters android and quickly says powering off. And shuts off.
jaadamoo said:
i got my hd2 to load android just fine.. but the screen is very dim.. any ideas??
Click to expand...
Click to collapse
you need to make sure automatic light is off in win mo before you boot up android and i always leave it at around 60% and it works fine.
I have also been having some scrolling issues. It goes down a tad bit and if you hold the screen for a fraction of a second too long after first setting your finger on the screen, then it acts as if you did a holding touch.
Also the 3g is very very slow, kinda makes the market place useless since it takes for ever to download something. Wifi downloading is working.
New zimage file
Try replacing your current zimage file with this one.
http://cotulla.pp.ru/leo/Android/Cotulla_zImage_CABDET_NOSPEEDDY.rar
Just replace/override it on your sd card.
Also delete your cache folder and your data file.
You will loose your information inside of android, like doing a reset of the OS.
Check this http://cotulla.pp.ru/leo/Android/ often, fair warning many people are having problems with the newer image marked(7-25)
Some roms or radios wont work for sure!
I am now running MIRI rom wm6.5 V17.6 with radio 2.12.50.02.2 and I must say very impressive how far you devs have come in a few weeks. Phone is working with audio and WIFI. I had stock rom TMO 2.13 installed with radio 2.10 and although Android loaded and ran fine I did not have audio during calls,they sounded robotic at times or no audio at all. I am not sure if it was the radio upgrade or switching the ROM to MIRI that did the trick. I have been playing with phone for approximately six hours nonstop and it has been solid...
Gen. Y DualBOOT Implementation
Does the app work well the newer builds?
Btw a very BIG thank you all the guys working on this, you guys are freaking AWESOME!
acessford101 said:
Try replacing your current zimage file with this one.
http://cotulla.pp.ru/leo/Android/Cotulla_zImage_CABDET_NOSPEEDDY.rar
Just replace/override it on your sd card.
Also delete your cache folder and your data file.
You will loose your information inside of android, like doing a reset of the OS.
Check this http://cotulla.pp.ru/leo/Android/ often, fair warning many people are having problems with the newer image marked(7-25)
Click to expand...
Click to collapse
Thanks, I was using the Jul 19 zImage.rar file. I'm about to try this one and see if it makes a diff.
anyone know how to get the data connection to work for T-Mobile on the Android desire v5? I go into APN settings but it always requires a username and password but t-mobile doesnt use a username/password for apn.

NexusHD2-Froyo V1.9a NAND Build with Residual Sense?

So, I've flashed my fair share of NAND's over the last 2 days, and I've settled with tytung's NexusHD2-Froyo V1.9a NAND. (Also, I did try asking there, and searching google with no luck.)
Its a great build, and I've been using his SD nexus builds exclusively for months; however, I have a lingering sense animation that refuses to go away. Every time I unlock the phone, the cloudy animation shows up and forces me to wait for it to finish before I can use my phone. Very strange. I tried reinstalling, with no dice.
My question is, can I simply use android commander and delete the sense file/s left in my system? And if this is the case, what files might I be looking for?
Thanks in advance!
M&ate said:
So, I've flashed my fair share of NAND's over the last 2 days, and I've settled with tytung's NexusHD2-Froyo V1.9a NAND. (Also, I did try asking there, and searching google with no luck.)
Its a great build, and I've been using his SD nexus builds exclusively for months; however, I have a lingering sense animation that refuses to go away. Every time I unlock the phone, the cloudy animation shows up and forces me to wait for it to finish before I can use my phone. Very strange. I tried reinstalling, with no dice.
My question is, can I simply use android commander and delete the sense file/s left in my system? And if this is the case, what files might I be looking for?
Thanks in advance!
Click to expand...
Click to collapse
it s not sense its beautiful widget or a meteo app if i remember just uninstall it!

[Q] MIUI 1.8.5 vs 1.9.2

I'm currently running MIUI 1.8.5 installed on the Nook itself. It runs so well that I'm hesitant to try 1.9.2 because I've uninstalled and reinstalled ROMs before and had them act completely different. The only issue I have right now is with playing videos so I'm very happy with what I have. But does anyone know what changes were made in the new version that might make it worth trying?
The only difference that I saw was that the update seemed to run a lot 'snappier' for me. But after a couple of days use with 1.9.2, it started freezing up on me. Over and over and over. I tried re-installing it a couple of times, but in the end finally gave up. Back to 1.8.5 which still freezes on me occasionally.
I know people have varied results with each rom. If it hadn't done the freezing thing, I would have loved the update and stuck with it.
1.9.2 is running great for me o emmc but if ur running on sd card i think a bunch of ppl are having problems with any miui on the sd card
Thanks guys!
moz90 said:
1.9.2 is running great for me o emmc but if ur running on sd card i think a bunch of ppl are having problems with any miui on the sd card
Click to expand...
Click to collapse
I was running this on emmc.
I'm not too worried about it if there aren't any significant changes. I have 1.8.5 running on emmc, and it's running so well that I probably won't mess with it unless at some point there is a fix to improve the video playback.
Hi,
I am running a somewhat older version of MIUI on my NC. I run it off the emmc and it seems to work quite well. I got a friend at work interested, and he installed a newer version of MIUI, probably 1.916 or something like that (its the current release this week.) I also bought a nook color to haque for my mother to use.
Here is my question: I would like for both of mine to use the same ROM, but I have already laoded a bunch of games and other apps on mine. If I re-flash the ROM with the newer MIUI, I imagine that it wipes out everything. So...., is there a way to update the ROM and keep the programs and settings for wifi and the like ? I bet it requires renaming the file somehow, but I do not find any specific instructions for the MIUI roms.
Yea just minimally wipe your cache not factory reset then flash the ROM all your apps setting ect. Will be there
Sent from my Inspire 4G using Tapatalk
merkurmaniac said:
Hi,
I am running a somewhat older version of MIUI on my NC. I run it off the emmc and it seems to work quite well. I got a friend at work interested, and he installed a newer version of MIUI, probably 1.916 or something like that (its the current release this week.) I also bought a nook color to haque for my mother to use.
Here is my question: I would like for both of mine to use the same ROM, but I have already laoded a bunch of games and other apps on mine. If I re-flash the ROM with the newer MIUI, I imagine that it wipes out everything. So...., is there a way to update the ROM and keep the programs and settings for wifi and the like ? I bet it requires renaming the file somehow, but I do not find any specific instructions for the MIUI roms.
Click to expand...
Click to collapse
It is also a good idea to use the MIUI built-in Backup app to save all your settings and apps (just don't include contacts in the settings section as it seems to duplicate all of your contacts). This way, if you need to do a clean install, you can easily restore all of your stuff.
O.K., I took another microsd card and backed it up using the backup portion of CWM. No I am ready to install the newer miui. Question is...
I am sitting at the CWM prompt and I am thinking that I should somehow rename the MIUI.us-encore_1.9.16_eng_Deo_zipA_Signed_andmer.zip file into something like update.zip ??? Or, do I more siply pick that file name from the SD card and apply it as a zip ? on top of the MIUI 8.05 or whatever it was I already have ?
merkurmaniac said:
O.K., I took another microsd card and backed it up using the backup portion of CWM. No I am ready to install the newer miui. Question is...
I am sitting at the CWM prompt and I am thinking that I should somehow rename the MIUI.us-encore_1.9.16_eng_Deo_zipA_Signed_andmer.zip file into something like update.zip ??? Or, do I more siply pick that file name from the SD card and apply it as a zip ? on top of the MIUI 8.05 or whatever it was I already have ?
Click to expand...
Click to collapse
You can simply pick the filename from the SD card, no need to rename the file. Have you followed the directions for formatting, etc as well? What is on your Nook now?

[Q] problems with sys folder

first of all this is a "google translate" cant spell english. sorry
problems (large) rooting, backup.
I think is crazy. began a few days ago would put a backup made ​​of CWM. made it 10-20 times before, but now the fun starts all goes as normal until the "sys" folder should be written as saying "telefonhel ** tet" is not possible to write "sys" folder .... then freezes the whole phone. going to start but stops at the first botbilden. must then put the phone in download mode, the drive into new ics via odin. Unless otherwise works to move up. do I add something else I'll just when to choose the Language for which locks up the phone. Does anyone know what happened, there may have been something wrong with your memory card or what??????
(when I've added new ics and rooted it, put in tx new rocketrom so the phone works as normal. tried to make a backup of CMW is Axa excellent. but cure me and trying to put it back so obvious the same thing happens.)
hope I have made myself a little understood in all cases.

[Q] Can't update or load android from SD and other issues with CM9 4.0.4 ICS

Hi!
My HTC HD Mini was left and unused for few months after replacing touch-glass.
There were some issues like ie. not working wifi, vibra or sound.
Today it works. BUT. I left device becose i had SE Xperia X10 mini and i hate work on windows.
Nowadays, as my X10 died, i decided to go back to HD Mini. Luckily i found that there is a way to run Android on it.
So, i downloaded some quite old version (and then some newer CM7 - tried both), put it on sd and tried to load. It hang up for more than 20 min, so i rebooted (as it schould 5-10 min).
Now it reboots after status bar goes to 100% - so it takes about 20-30 seconds.
I got an idea to upgrade my winos (OS: 5.2.23103, ROM: 1.36.479.1), but when it goes to flash mode, it says 'starting', waiting for few seconds, and then "i can not upgrade your device" or whatever. Device only reboots.
Ofcourse i've searched forum and google for something simillar, but, maybe, i do not know how to ask.
Sorry for my english.
Thanks in advance,
Gloomwing
about SDCard, it could be problem of your sdcard is bad, bad sdcards won't work well with android.
and the NAND, Not sure about that, but you may try another ways or use the newest CWM that also works with schlund's ROM
Yup, I'll try with another SD (i have 2GB one which cames with X10) and will give info.
About NAND i prefer to run droid from SD at the moment - just do not want to risk installing OS that may not work on my device.
It works with ADATA 16GB, 10.
Did not try with windows update. Just installed Droid on NAND.
(furter issues in main topic of "[ROM] CM9 4.0.4 ICS HTC HD Mini [16.Jul.2012]"
Thanks and regards!
glad to see you so it was SDcard problem..
have fun..
Ok, i can not drop any post on main topic, so i will write here:
I read main topic, but it will last...
1. YES!, we need instruction (easy howto) about installing new ROM (i made it somehow, but i have some experience with X10)
2. Battery is messed up, but it works. It even last more than a day. Had some issue with 99% CPU usage - found some info to flash update - AGAIN! - we need howto!
3. My Photon freezes sometimes. I changed sleep time in screen section, and it helpes somehow. Maybe, again, battery issue? As i have less problems while battery over 50% or Trebuchet?
Many thanks and best regards!
(can anyone drop it in main topic?)
Let me know which one you're trying to install??

Categories

Resources