Database Users

[Q] Lost CWM & Root Access in HC 3.2 ROM. Need Help

Hi,
I updated my A500 from 3.1 stock to Taboonay 2.0 HC 3.2. For some reason I decided to revert back to HC 3.1 Stock but in trying to do so I messed up and lost both CWM and Root Access. Now I can still boot into Taboonay 2.0 HC3.2 but I cannot access CWM and I cannot flash any other ROM as I do not have Root Access. Also due to lack of Root Access I cannot install CWM.
Can someone please help me regain control of my device??? Please!!!

Try iconiaroot.
Sent from my DROIDX using Tapatalk

jm77 said:
Try iconiaroot.
Sent from my DROIDX using Tapatalk
Click to expand...
Click to collapse
Already tried it and the previous version for it. It seems that they only work HC3.0 & 3.1.
Thanks for the advice though.

farazjk said:
Already tried it and the previous version for it. It seems that they only work HC3.0 & 3.1.
Thanks for the advice though.
Click to expand...
Click to collapse
Iconiaroot is for 3.1,Quick answer:Acer Recovery Installer: https://market.android.com/details?id=com.interphaze.AcerRecoveryInstaller&feature=search_result

Acer recovery installer also requires a rooted device to perform all of its functions including installing recovery.

D/load and flash a full rom some of them will work thru reg Acer recovery for your SD card.

erica_renee said:
D/load and flash a full rom some of them will work thru reg Acer recovery for your SD card.
Click to expand...
Click to collapse
Ok will give it a try. Do I have to rename the ROM as update.zip?

farazjk said:
Ok will give it a try. Do I have to rename the ROM as update.zip?
Click to expand...
Click to collapse
No,just leave it as it is.

After the update, I hane access more to the USB flash memory as wll as to any Fat 32 USB hard drive. Do you have the same problem.

farazjk said:
Hi,
I updated my A500 from 3.1 stock to Taboonay 2.0 HC 3.2. For some reason I decided to revert back to HC 3.1 Stock but in trying to do so I messed up and lost both CWM and Root Access. Now I can still boot into Taboonay 2.0 HC3.2 but I cannot access CWM and I cannot flash any other ROM as I do not have Root Access. Also due to lack of Root Access I cannot install CWM.
Can someone please help me regain control of my device??? Please!!!
Click to expand...
Click to collapse
Same problem at my end...
erica_renee said:
D/load and flash a full rom some of them will work thru reg Acer recovery for your SD card.
Click to expand...
Click to collapse
Acer recovery needs "root" access....superuser can be seen in the list of apps but it is denying permission to all apps despite setting "allow" to all apps on default!
What to do?
Tried iconia root....."denied root access"
Tried Acer recovery....."needs root access"
CMW can't be booted into as somehow it is not there!
Tried factory data reset......no change in problem!
??
Help/suggestions needed!

Erica's Cure Worked for me!!!
Ok after taking advice from Erica, I downloaded the official full ROM package from http://forum.xda-developers.com/showthread.php?t=1159443 and extracted the update.zip from it and placed it in the root of my external sd card. Switched off the A500 and rebooted it pressing Vol (down) & Power button till white text appeared in top left corner of the screen. A500 then started updating and successfully completed the full ROM install. On completing A500 automatically rebooted and all is good now. I am now on Stock A500 ROM HC3.1. I have not rooted or installed Acer Recovery app yet. I am going to wait for the official HC 3.2 from Acer Malaysia which I think is due on 10th September.
Thank you everyone on this amazing forum for helping fix this issue for me. Hope this solution also works for others having similar issues.

Additional steps to the last procedure
Ok... Last procedure though restored my A500 to Stock HC3.1 but was not allowing the OTA updates. So I copied update.zip from here: http://forum.xda-developers.com/showthread.php?t=1113878. (you must ensure that you download the ROM that is specifically for your device region... mine is Thailand).
I repeated the same procedure as I did before (see last post). After installation completed, and device rebooted. I checked for new updates (from settings menu / About Tablet / Updates). Voila!!! new updates were detected and are downloading now. These are not HC3.2 updates but HC3.1 update patches.
Cheers!

Moved to Q&A

farazjk said:
Ok after taking advice from Erica, I downloaded the official full ROM package from http://forum.xda-developers.com/showthread.php?t=1159443 and extracted the update.zip from it and placed it in the root of my external sd card. Switched off the A500 and rebooted it pressing Vol (down) & Power button till white text appeared in top left corner of the screen. A500 then started updating and successfully completed the full ROM install. On completing A500 automatically rebooted and all is good now. I am now on Stock A500 ROM HC3.1. I have not rooted or installed Acer Recovery app yet. I am going to wait for the official HC 3.2 from Acer Malaysia which I think is due on 10th September.
Thank you everyone on this amazing forum for helping fix this issue for me. Hope this solution also works for others having similar issues.
Click to expand...
Click to collapse
Not working...after extracting "update.zip" placed "update.zip" into root of sd card....inserted sd card..rebooted....pressed power+vol down....it booted normally into the taboony which was already there instead of updating....???
What to do?
Help needed!

Neet said:
Not working...after extracting "update.zip" placed "update.zip" into root of sd card....inserted sd card..rebooted....pressed power+vol down....it booted normally into the taboony which was already there instead of updating....???
What to do?
Help needed!
Click to expand...
Click to collapse
Worked now...had to use "Power+ Vol Up" button in portrait mode.
Thanks
))

[Q] Still Have SOD with Flexreaper 11

I, Not at 10 post yet so Here I post,
Can any one help me with SOD on the new Flexreaper 11 ROM. Acer Recovery tool indicates i have 3.01 bootloader. I Had a 3.2 Rom before that worked fine. I Wiped everything and formatted Flexrom and system. First time it went to sleep it would not wake up.
Thanks!

fayettec said:
I, Not at 10 post yet so Here I post,
Can any one help me with SOD on the new Flexreaper 11 ROM. Acer Recovery tool indicates i have 3.01 bootloader. I Had a 3.2 Rom before that worked fine. I Wiped everything and formatted Flexrom and system. First time it went to sleep it would not wake up.
Thanks!
Click to expand...
Click to collapse
Did you install the Flexreeper new bootloader? This is probably why you still have SOD. If I am not mistaken, Flexreeper has 2 or 3 different versions of bootloader that you need to use. Depending on which version of the rom you want to install.

Scary Bootloader
Moscow Desire said:
Did you install the Flexreeper new bootloader? This is probably why you still have SOD. If I am not mistaken, Flexreeper has 2 or 3 different versions of bootloader that you need to use. Depending on which version of the rom you want to install.
Click to expand...
Click to collapse
Thanks for the reply.
I thought that the img file was for people with ICS bootloaders, I thought that I had HC3.0.1
I'm afraid if i flash the ICS img file that I won't beable to get back to HC or that because I have 3.0.1 bootloader that the ICS bootimage file they have there will brick my a500

If you formatted and wiped everything as you were instructed . I am wondering if when you get to the google setup screen something is being restored from the old system.. When it gets to where you setup your google account. Uncheck the backup and restore boxes .
Do not restore any apps or settings from say TI BACKUP. Install only a few apps that you MUST HAVE and know work with google ics. run for a few days and see what happens.
if you still have a issue go back to 3.2 for a week and see if it works. it could be just coincidence that hardware fail-or at the same time as you flashed your tab. ..
just a though thou unlikey

Thanks
I went ahead and tried the ICS Boot.img file after reading some new post in the thread. It worked! Interesting side note, be fore the flash at boot up the display showed:
ACER.
After it was:
ACER ACER
Thanks again!

fayettec said:
I went ahead and tried the ICS Boot.img file after reading some new post in the thread. It worked! Interesting side note, be fore the flash at boot up the display showed:
ACER.
After it was:
ACER ACER
Thanks again!
Click to expand...
Click to collapse
You running an a500 or an a501?
Last time I saw the double Acer, was when the leak first came out. The 500 had issues, but not the 501 (except for double acer).
The double Acer is normal. Be glad you don't get the AFU screen like the rest. It's a BETA release, and it has..... issues. Hopefully Acer will release an official build that will do away with a lot of the issues in the near future.

fayettec said:
I, Not at 10 post yet so Here I post,
Can any one help me with SOD on the new Flexreaper 11 ROM. Acer Recovery tool indicates i have 3.01 bootloader. I Had a 3.2 Rom before that worked fine. I Wiped everything and formatted Flexrom and system. First time it went to sleep it would not wake up.
Thanks!
Click to expand...
Click to collapse
I came from ezterry's acer7.014.14_CUST_ROOT_BBv4_S. I just flashed Flexreaper R11 this morning. I've noticed SOD at least three times today. My bootloader version is 3.01 like in the OP. I noticed he ended up flashing the ICS bootloader. Is this the only known fix? And if so, will ICS bootloaders prevent me from restoring a HC NAND? Thanks.

How do we find our boot loader version? When I do, what does that mean for ROMs I can flash? I have flexreaper r11 and it is consistently SOD badly. :'(
Sent from my SGH-I777 using xda premium

bigwilly90210 said:
How do we find our boot loader version? When I do, what does that mean for ROMs I can flash? I have flexreaper r11 and it is consistently SOD badly. :'(
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
To me a favor and flash the kernel for ICS boot loader users.
Its in the thread , section kernels.
The rom got a auto script for installing the correct boot.img but even for some the ICS boot.img is needed.
Worst that can happen is stuck on Acer logo, if you got that just reboot into recovery and flash the boot.img or kernel for HC boot loader users.
The thing is that even for some people that got HC bootloadr they still need to flash the Kernel for ICS boot loader users, strange yes but no harm in trying.

I'm wondering if something in the cmdline for the LP0 changed in the latest leak causing the kernels packed for the old bootloader to have SoD again.
Also, some of you guys, please don't confuse bootloader with boot.img. They are not the same thing. FLEXREAPER does not contain any bootloaders. It contains 2 different boot.img's and trys to install the correct one based on the bootloader you have.
The bootloader only gets changed if you flash it via nvflash (or flash a stock leak but then it would be locked).
@someone who asked above. if you flash the ICS bootloader(0.03.11-ICS), you would not be able to run HC ROMs, unless you went back to the HC bootloader (3.01).
But apparently, the ICS boot.img is working for some on the old HC bootloader and resolving the SoD issue for them.

Running Rooted 3.2.1 to ICS? Do I unroot?

I'm running completely stock, no rom anything. Just flashed updates from users here to update me to the latest HC. I received the ICS update but pretty sure it won't work since I'm rooted and running CWM recovery. What do I need to do to install ICS? thanks

tu3218 said:
I'm running completely stock, no rom anything. Just flashed updates from users here to update me to the latest HC. I received the ICS update but pretty sure it won't work since I'm rooted and running CWM recovery. What do I need to do to install ICS? thanks
Click to expand...
Click to collapse
Same question here
Sent from my A500 using XDA

3d0rr said:
Same question here
Sent from my A500 using XDA
Click to expand...
Click to collapse
I am in the same camp.
I'm running a rooted 3.2 stock by Timmy Dean.
I'm happy I didn't jump the gun when I Saw the update last night, because it seems I would have truly been screwed.
What I would like to know is if a rooted 3.2 can simply be unrooted. Seems this would the simplest thing to do.
Thanks in advance for any and all help.

Apparently the root doesn't matter. It will just be removed when we install the ota ICS. What worries me is recovery. Because it has to boot into a recovery to install ICS. I had CWM installed then flashed to stock by acer recovery tool in the play store. But when I manually boot into recovery, I get a exclamation point inside a triangle. What recovery are you guys running?

tu3218 said:
Apparently the root doesn't matter. It will just be removed when we install the ota ICS. What worries me is recovery. Because it has to boot into a recovery to install ICS. I had CWM installed then flashed to stock by acer recovery tool in the play store. But when I manually boot into recovery, I get a exclamation point inside a triangle. What recovery are you guys running?
Click to expand...
Click to collapse
I have CWM recovery by thor2002. I think we can't update via ITS unless we flash original recovery
Sent from my A500 using XDA

3d0rr said:
I have CWM recovery by thor2002. I think we can't update via ITS unless we flash original recovery
Sent from my A500 using XDA
Click to expand...
Click to collapse
Yeah I think so as well. I flashed stock via the Acer recovery tool but I get nothing when I boot into recovery except what I stated above. I'm not sure if that's right or not.
Sent from my Galaxy Nexus using XDA

I was happily running timmydean's rooted 3.2.1 based on the leaked OTA. The ICS upgrade came through and installed just fine. No loss of data and the programs I tried all worked. I was on stock 4.0.4 unrooted.
However, I'm now borked. I rebooted into recovery (Power, Vol -) to see about rooting via the backdoor I'd installed. I had thor's 1.7 Touch CWM recovery installed. I got some weird message that recovery was broken. (Don't recall the exact msg.)
After that, it hung on the "android" screen. Soft-bricked.
So I did a factory reset (Power, vol+, rock screen switch) and ended up back on 3.2.1. Now, the Settings > About > Check update results in the "Network coverage is currently poor. Please move to a location with better coverage to continue." message.
My WiFi is fine, speedtest.net reports a 20 Mbps download. All other apps function well. I'm pulling a DCHP address from my router.
I'm fairly sure this is a badly-worded error message from Acer and actually refers to server overload or some other issue on their end.
Also, installing the latest Acer Iconia Update preps the system for ICS. At one point, installing it allowed the update to proceed, but not to ICS. Uninstalling/reinstalling that update seemed to jog the system at one time.
So I tried wiping data/cache/dalvik and went back to stock 3.2. Same error message when updating. Wiped again and went back to stock 3.0.1. Same error message.
So I'm stuck and am going to give it a few days to see if Acer can sort out their upgrade path. If not, I will probably load CM9 or Thor's ICS ROM. (I do have a Nandroid, so I can get back to where I was pre-ICS.)
All in all, I'm very disappointed in Acer for borking my tablet.
________
Update: So now a day later, the "poor coverage" message was replaced by an "update available". Installed A500_7.014.03_com_gen1, after reboot, another update A500_7.014.15_com_gen1 installed. I am now on stock 3.2.1.
System update shows "Your device is up to date".
Will see what tomorrow brings, but this is certainly frustrating.

thorne75 said:
I am in the same camp.
I'm running a rooted 3.2 stock by Timmy Dean.
I'm happy I didn't jump the gun when I Saw the update last night, because it seems I would have truly been screwed.
What I would like to know is if a rooted 3.2 can simply be unrooted. Seems this would the simplest thing to do.
Thanks in advance for any and all help.
Click to expand...
Click to collapse
********************************************
Could you guys running the backdoor and still rooted please try this:
1) Try and capture the build no. of the update
2) See if the update will download BUT do not install yet
3) Go to /cache/fota/ and find the zip -
4) copy it to yr external sd
5) post back the build no.
thanks!!!
Procedure for manual install:
1/ rename the file as : update.zip
2/ place the file on the micro sd card
3/ turn off the tablet
4/ press the down volume key and the power button at the same time untill the tablets turns on
5/ the iconia will start the upgrade process by itself.
OR just redownload the update and it install
*********************************************
I had trouble when i reverted to stock in the weekend
and it was a bit of a process to get the OTA's to 3.2.1.
I did manage to hold "full root" but had to revert a couple of times
by putting stock recovery back and using backdoor .
I accidentally factory reset and everything went a bit pear shaped from there...oops!!
Im still waiting for the OTA ICS - getting network coverage error -one good thing
is my partners tab is only 5 days old and still pure factory,
her tab shows same error so at least we know its not root/backdoor problem
So yeah if u gonna take the OTA best to get rid of the backdoor unless you wanna play guinea pig for us all>>>>
dunno why we aint found one of those yet
I dont think you can cause too much of a problem where a "hard reset" pwr/vol -/rotation lock/ combo wont fix...you can then root from there.
---------- Post added at 12:45 PM ---------- Previous post was at 12:36 PM ----------
3d0rr said:
I have CWM recovery by thor2002. I think we can't update via ITS unless we flash original recovery
Sent from my A500 using XDA
Click to expand...
Click to collapse
hi 3d0rr!!
i think those of us with the backdoor should be meticulous if/when taking the OTA.
we shouldnt need to unroot and use stock recovery as the ota should get rid of that in the flash. But to ensure a stress free OTA it may pay to do it anyway.
i know you previously told me u were stock gen 1 - but is that from factory, just finished reading a very interesting post regarding the different 'gens' so i for one am sticking with factory build gen :just for the official OTA anyway:

dibb_nz said:
********************************************
hi 3d0rr!!
i think those of us with the backdoor should be meticulous if/when taking the OTA.
we shouldnt need to unroot and use stock recovery as the ota should get rid of that in the flash. But to ensure a stress free OTA it may pay to do it anyway.
i know you previously told me u were stock gen 1 - but is that from factory, just finished reading a very interesting post regarding the different 'gens' so i for one am sticking with factory build gen :just for the official OTA anyway:
Click to expand...
Click to collapse
Dibb_nz, I was stock gen 2. I don't wanna take OTA until be sure it's safe. Unless now I know that a hard factory reset may save my tab if something happen.
Can you tell us where did you read that post about 'gens'? I still a little confuse about that
Sent from my A500 using XDA

BTW, the network coverage errors seems to be an Acer's error. First I received OTA and a day after that I see that error on my tab. And a couple of hours later I have OTA again. So, don't worry, you should get OTA asap
Sent from my A500 using XDA

3d0rr said:
BTW, the network coverage errors seems to be an Acer's error. First I received OTA and a day after that I see that error on my tab. And a couple of hours later I have OTA again. So, don't worry, you should get OTA asap
Sent from my A500 using XDA
Click to expand...
Click to collapse
oh sounds promising, although I just read another post from someone across the ditch in OZ he reckoned acer said they were working on a patch for the problems theyre havin with the first update...who knows
now m8, sorry to confuse you, that wasnt my intention, but i try to make sure that i;m not suggesting things which may end with you or others borkin or brickin yr tab. Ive spent the last few days reading thousands of posts (just like everyone else) thankfully we are fortunate in being able to learn from the mistakes of others I know a bit more about ics than i did 3 days ago let me tell you, lol.
i just finished helpin out a fellow "timmy-ite" stuck with no way of getting in to apx mode to get un-borked...well didnt really help just a sounding board more than anything
he got himself up and running, used the apx tool in my sig, unlocked the bootloader, rooted, flashed custom recovery did a nand and is now running flexreaper - with the tools and knowledge he gained he now has the choice to go back to HC to get the OTA or not....he's one happy camper!!!
Have a read have a read thru the threadhere. ask him a question or two if you want - but dont get too hung up "maybe doing something wrong" you won't be the only person ever to experience that uhh-ohh sinking feeling when you know you shouldnt have just done whatever it was that u just did
Theres always someone round here who will help - usually cos they done the same silly lthings themselves - why ya think i'm always posting

what is the backdoor program you guys talk about?

tu3218 said:
what is the backdoor program you guys talk about?
Click to expand...
Click to collapse
timmydean's root method also allows you to install a backdoor to re-root after accepting an OTA. You have to manually install it during the rooting process, so you would know if you had it.

jpinsl said:
timmydean's root method also allows you to install a backdoor to re-root after accepting an OTA. You have to manually install it during the rooting process, so you would know if you had it.
Click to expand...
Click to collapse
timmyDean How to root stock 3.2.1
Summary:
Version V4 is the same as V3 with the only difference being that there is a NEW backdoor script which has some additional features to protect root(#) from getting broken when you do an OTA. I also applied these to this flash image so you wouldn't have to add the additional protection yourself. V4 also has the drivers for XP included. However, when taking an OTA you should also install the backdoor for additional protection. However, you cannot leave the backdoor installed as it turns off sound. So having a little more protection just might save your root in case you take an OTA and forget to install the backdoor.
Click to expand...
Click to collapse
beat me to it
its a completely stock gen2 rooted and cwm - you can use to unbrick, or go back to stock. only for HC bootloaders though.....

This worked to me
tu3218 said:
I'm running completely stock, no rom anything. Just flashed updates from users here to update me to the latest HC. I received the ICS update but pretty sure it won't work since I'm rooted and running CWM recovery. What do I need to do to install ICS? thanks
Click to expand...
Click to collapse
Well my friend, this worked to me... I hope this can help somebody else:
Original ROM: Acer A500 3.2.1 COM_GEN2 Rooted and with CWM using Timmy's method.
1) Go to play market and install Acer Recovery Installer.
2) Open Acer Recovery and verify with recovery do you have. In my case it was CWM recovery by thor2002ro 1.5
3) Install stock recovery. Make a backup of your old recovery when ask.
4) Factory reset: in my case, I made a backup of all my data and used Titanium to backup some apps. Then I harded reset my tab by turning it off and the combo pwd + vol(+) then lock-unlock switch 3 times until I saw "eraing user data" in the top-left corner.
5) turn on the tab and go to google play. Search for acer and install Update enhancement.
6) Go to settings-> about-> system update and aply the OTA update.
You will lost root, but everything should work fine.
To gain root access again, you can follow this thread -> http://forum.xda-developers.com/showthread.php?t=1546593
Now I have rooted stock ICS and I'm so happy

Hey great write up, will try this as soon as I'm off work. Anyway to confirm stock recovery is installed? Because I have done what you said(just the flash stock recovery part) an when I boot into recovery I just get a triangle an exclamation point. Not sure if thats right or not. But I will definitely give this a go since you were running exactly what I'm running now.
Sent from my Galaxy Nexus using XDA

3d0rr said:
Well my friend, this worked to me... I hope this can help somebody else:
Original ROM: Acer A500 3.2.1 COM_GEN2 Rooted and with CWM using Timmy's method...
...To gain root access again, you can follow this thread - ...xda-developers.com/showthread...
Now I have rooted stock ICS and I'm so happy
Click to expand...
Click to collapse
yay for 3d0rr you finally took the plunge congrats!!!!!
@tu3218
That download link is no longer available
instead download blackthund3r's one-click-root,
google "ICS Root for Windows"
At step 3 - After you have backed up -
Copy the uid.txt file from the backup folder - this holds your cpu id -
you're probably gonna need it at sum stage

I followed your instructions and it went perfect!!! Rocking ics now. Thanks for the help. First thing I notice, soooo much faster an full of butter.
Sent from my Galaxy Nexus using XDA

go back to stock ics non-rooted?

I'm probably gonna have to send in my tablet for repair and I've rooted and installed flexreaper's R14 from for ics.I bought the tablet about a month ago it had honeycomb idk if there's a way I can get back to that if not can I get back to stock ics and how can I unroot my tab?

The better way is restore the official rom, you can do it with the downgrade to 3.0.1 unstable.. Which bootloader? HC or ICS?
If you have HC, make the downgrade and then the OTA update or flash a totally stock non-rooted rom (Androonay - vache's site), everything will be stock..
I've done the same 2 days ago e no issues

I think I have the ice boot loader I'm not sure though how can I tell?

rcraig617 said:
I think I have the ice boot loader I'm not sure though how can I tell?
Click to expand...
Click to collapse
Launch Acer Recovery Installer v2.74, it should show which bootloader you have.
If is 3.01 -> HC

Boot loader Version=0.03.12-unl is what it says

rcraig617 said:
Boot loader Version=0.03.12-unl is what it says
Click to expand...
Click to collapse
It's an ICS bootloader unlocked
Sent from my Packard Bell [email protected] v169 using Tapatalk

So can I go back to stock ics and if so how? Also will they know I rooted if I send in my tab if so I wanna unroot also if any can help me.

I'm wondering the same thing. CWM rev1.3.4 by thor2002ro bootloader version is 3.01 is what I have on mine.

Use one of the TimmyDean APX Packages with your UID and you can flash the unstable 3.0.1 build. Then install Acer Update Enhancement (either from the market or from the Acer website via the APK download) and update to OTA ICS

http://forum.xda-developers.com/showthread.php?t=1632392&highlight=timmydean
would this work?

rcraig617 said:
http://forum.xda-developers.com/showthread.php?t=1632392&highlight=timmydean
would this work?
Click to expand...
Click to collapse
That's the rooted package. On second thoughts - head to vache's download link thread and scroll down to the EUU section
Sent from my Iconia A500 using Tapatalk 2

Similar situation... almost
I am in a very similar situation as the OP except my hardware problem is that both the USB and microUSB have quit on me. Without being able to use APX mode, I'm pretty hosed... right? Anyone want to place an over/under on Acer ignoring the unlocked bootloader and fixing the defective USB module?

You could also use afterOTA found here.
http://forum.xda-developers.com/showthread.php?t=1675939
and it walks you through going completely stock, although why are you sending it in? I have sent a couple things back for screen replacements and they didn't care it was running custom ROMS. But that tool should do the trick for you.

I just got the tab a month ago and my speakers randomly stopped working on me I wanna send it in while I still have warranty

mastashake said:
I am in a very similar situation as the OP except my hardware problem is that both the USB and microUSB have quit on me. Without being able to use APX mode, I'm pretty hosed... right? Anyone want to place an over/under on Acer ignoring the unlocked bootloader and fixing the defective USB module?
Click to expand...
Click to collapse
You can fix that. MicroSD
Stick on a MicroSD a stock Acer ICS Leak ROM and flash it in CWM
Then once flashed, it'll automatically flash the stock bootloader and when it boots it'll flash the stock recovery back! Then reboot it and do the Volume Up / rotation lock toggle to wipe all your data off then it's completely stock!
Sent from my Iconia A500 using Tapatalk 2

A501 bricked need a big help :(

Hello guys,
yesterday i updated my stock 3.2.1 a501 with ota ics 4.0.3 stock and and everything went well.
After this, i tried to root it with afetrota, but because of the lack of attention in doing it, i made an error and i bricked.
Booting i see a message: "boot verified failed" and nothing more happen.
I tried an hard reset and other things but unsuccessful.
In apx mode, i tried to load, alwayas with afterota an update.zip using sono files but on reboot the message is an illegal blob and update stop.
Anyone can help me to get out of this somehow?
I think boot loader in ics now, but i'm not shure...what can i do?
Thanks all in advance
Massimo
p.s. sorry for my bad English

Ok, after a loto of try, errors, ect, I'm back to hc 3.0.1 unstable.
But...a new problem i don't remind the way to back to a501 stock to get ota updates....in a few words to back like my tablet was unpacked first time
Thank for help.

Oh man, your going to either have to run tlss little honey ( stock but rooted) or put on a custom rom, you will need root for this good luck
Sent from my A501 using xda app-developers app

Thank you for your reply.
Now the problem is solved....finally
Regards

This thread could be deleted thanks