I joined the site about a year ago when I first got my TMobile G2 with the intent of modding it. Since I used it mainly for work, I decided to leave it alone and became a lurker since I didn't have much to offer (info wise). Recently I picked up a Nook Color, and after reading about several different mods, decided on Rack's Dual Boot.
Being a noob to Android Systems (but not to computers), I reread the directions a few times. When I got the gist of what to do, I ran through it with no issues. Turned out to be unbelievably easy. Many Thanks to Racks and everyone else that worked so hard to bring us this awesome information (as a side note F**K those douches that are selling cards on fleabay).
Now to the point; There are a couple of questions/issues I have that maybe someone can help with:
1. Occasionally, when I try and download apps from Play, I get an "error in processing purchase" message. When I power down, then boot back and flash the ICS gapps, everything is fine. I have tried clearing cache and data and get the same error message.
2. In CM7, the Nook Tweak App does absolute wonders for the volume of the crappy little speaker. Anything for ICS?
3. I have LG HBS700 Bluetooth Headphones. They work great in GB CM7, but nothing in ICS CM9.
4. Netflix works like a charm in GB CM7 but bogs and freezes in ICS CM9. Same for Youtube. I have downloaded Flash Player with same results.
5. Lastly, is there any way to get sound INTO the NC? That way I can use the Dolphin Voice Browser, Google Voice Search, etc.
Not big on flashing nightlies. Prefer to get system doing what I want and being stable, then sticking to it.
Many Thanks in advance - Mike
UPDATE:
#1 happened again, and reflashed GAPPS. Got the same error message again. Now, I can't download anything from Play Store in ICS CM9.
??????????????????????????????????????
Mike
gollumses said:
UPDATE:
#1 happened again, and reflashed GAPPS. Got the same error message again. Now, I can't download anything from Play Store in ICS CM9.
??????????????????????????????????????
Mike
Click to expand...
Click to collapse
Sorry to hear ur having issues. Only suggestion I would have is to backup whatever apps you have on CM9 with Titanium Backup or any other app that is capable of doing so. Then download a more recent update of a DualbootSD CM9 from the techerrata server. Copy the zip over to the /sdcard partition of the DualbootSD rom and boot into the CWM that is included with the DualbootSD. Then go to "mounts & storage" and choose to format /system & /data then flash the update you just downloaded. That should fix whatever issues you are having with market.
-Racks
gollumses said:
Now to the point; There are a couple of questions/issues I have that maybe someone can help with:
5. Lastly, is there any way to get sound INTO the NC? That way I can use the Dolphin Voice Browser, Google Voice Search, etc.
Click to expand...
Click to collapse
No. The nook has no microphone and bluetooth Mike inputs don't work either. Sorry.
Thanks Leapinlar.
I pretty much already knew the answer to 5, but asked just in case anyone had gotten something to work.
The rest aren't horrible problems. Thanks to the dual boot card, I just reboot into CM7 to watch Netflix. And by the way, the range with my BT Headset is in feet not inches. I was pretty impressed for having no antenna.
The recent Play thing is a pain though. I will walk through your recommendation and get back.
Thanks - Mike
Attached is what I get with Netflix via ICS
Sorry
Meant my last to say "Thanks Racks and Leapinlars"
Mike
racks11479 said:
Sorry to hear ur having issues. Only suggestion I would have is to backup whatever apps you have on CM9 with Titanium Backup or any other app that is capable of doing so. Then download a more recent update of a DualbootSD CM9 from the techerrata server. Copy the zip over to the /sdcard partition of the DualbootSD rom and boot into the CWM that is included with the DualbootSD. Then go to "mounts & storage" and choose to format /system & /data then flash the update you just downloaded. That should fix whatever issues you are having with market.
-Racks
Click to expand...
Click to collapse
Hey Racks,
Okay, I downloaded the MIUI Updates for the Dual Boot Card and put them on the SD Card. I then booted to recovery and open chose zips from SD Card. Installed both GB and ICS Updates. Rebooted into ICS, and everything looked fine. Tried booting into GB and got a nice MIUI.us Boot Screen, then splash screen looks nice, and as soon as I unlock the device I get: "The application launcher (process com.android.launcher) has stopped unexpectedly" and the same with "media" and "acore"
I tried reflashing the old GAPPS, and nothing. My only two options are "FORCE CLOSE" and "REPORT TO MIUI"
Any suggestions?
Thanks Again - Mike
Okay, now I reflashed CM7 MIUI and can't boot into GB. Stuck at MIUI Boot Screen.
On the good news side; I can now download files from Google Play in ICS. WOW! If it's not one, it's the other. HAHAHA
Issues get fixed, and it's still better than the stock Nook Color.
Can I go back to standard Mirage CM7 and keep MIUI CM9, or is it "all or nothing?"
Thanks Again - Mike
gollumses said:
UPDATE:
#1 happened again, and reflashed GAPPS. Got the same error message again. Now, I can't download anything from Play Store in ICS CM9.
??????????????????????????????????????
Mike
Click to expand...
Click to collapse
Try going into Settings, Applications, Manage Applications, All. Find the Google Playstore app. Clear cache. Playstore will then reload your apps when you start it next. If that doesn't work, clear cache and data. You'll have go through the registration process again, but it may work.
Thanks Shumash.
I finally got Google Play working after installing MIUI Update 03252012 (ICS). My big issue now is with CM7.
After doing the update, as soon as I do the unlock, I start getting error messages (see above). I can't get into anything. I can only reboot or turn off power.
I know I can go back to factory settings, reformat and setup the SD Card, and start all over with Mirage CM7 and CM9. Is there a shorter way? Ideally, I would like to revert MIUI CM7 back to the original Mirage, and leave it be (everything worked fine HAHAHA) until someone comes out with a stable HW accelerator, so I can have my Netflix and YouTube in ICS.
Thanks Again - Mike
Convert2Dualboot-SD Tool
Racks,
I've been using your triple-boot for a couple weeks (works great, by the way--thanks!), and I decided to try your Convert2Dualboot-SD Tool (mainly so that I could have ICS CM9 as my primary). Previously I've had Mirage CM7.2-RC1 from 3-23-2012 in primary and ICS CM9 non-OpenGL from 3-25-2012 in secondary. I downloaded everything, including your newest ICS CM9 non-OpenGL (the 5-1-2012 version), to the Nook, extracted, dropped the ICS CM9 zip into the rom-to-modify folder and the ICS gapps file into the gapps-to-modify folder, opened a terminal session and ran the Android script. Everything seems to have been created fine--the new files were in Primary-Mod. I then went into recovery, formatted system1 & data1, then flashed both the ICS CM9 zip and ICS gapps zip.
When I tried to boot into primary, nothing happened. I then booted into secondary and discovered that the secondary partition had been updated to the new ICS version (5-1-2012). It was flaky, so I went back into recovery and re-applied gapps (this time using the non-modified version). It seems to be working fine now, but is in the secondary partition. My primary is apparently currently empty because of the formatting.
So unless CM9 should never be placed in the primary partition, there seems to be a bug somewhere (at least in the Android version). I did see something in the script that appears to be a problem. Within the "ga" leg, it has this coding:
mv gapps_DualbootSD_alternate_${DATE}.zip ../Primary-Mod/gapps_DualbootSD_alternate_${DATE}.zip
I'm not a programmer, but having "Primary-Mod" intermixed with "alternate" would seem to be problematic. But since this is the "ga" leg, I don't know that this would have caused CM9 to be applied to the secondary partition instead of the primary, so there may be a problem somewhere else.
Do you know if anyone else has successfully applied your modded version of the CM9 rom to primary using the Android script? Or should the existing modded version only be placed in the secondary partition?
Thanks,
oldfolkie
oldfolkie said:
Racks,
I've been using your triple-boot for a couple weeks (works great, by the way--thanks!), and I decided to try your Convert2Dualboot-SD Tool (mainly so that I could have ICS CM9 as my primary). Previously I've had Mirage CM7.2-RC1 from 3-23-2012 in primary and ICS CM9 non-OpenGL from 3-25-2012 in secondary. I downloaded everything, including your newest ICS CM9 non-OpenGL (the 5-1-2012 version), to the Nook, extracted, dropped the ICS CM9 zip into the rom-to-modify folder and the ICS gapps file into the gapps-to-modify folder, opened a terminal session and ran the Android script. Everything seems to have been created fine--the new files were in Primary-Mod. I then went into recovery, formatted system1 & data1, then flashed both the ICS CM9 zip and ICS gapps zip.
When I tried to boot into primary, nothing happened. I then booted into secondary and discovered that the secondary partition had been updated to the new ICS version (5-1-2012). It was flaky, so I went back into recovery and re-applied gapps (this time using the non-modified version). It seems to be working fine now, but is in the secondary partition. My primary is apparently currently empty because of the formatting.
So unless CM9 should never be placed in the primary partition, there seems to be a bug somewhere (at least in the Android version). I did see something in the script that appears to be a problem. Within the "ga" leg, it has this coding:
mv gapps_DualbootSD_alternate_${DATE}.zip ../Primary-Mod/gapps_DualbootSD_alternate_${DATE}.zip
I'm not a programmer, but having "Primary-Mod" intermixed with "alternate" would seem to be problematic. But since this is the "ga" leg, I don't know that this would have caused CM9 to be applied to the secondary partition instead of the primary, so there may be a problem somewhere else.
Do you know if anyone else has successfully applied your modded version of the CM9 rom to primary using the Android script? Or should the existing modded version only be placed in the secondary partition?
Thanks,
oldfolkie
Click to expand...
Click to collapse
Goodness! Gotta check my script! But that should have been moved to Alternate-Mod. But as in the appended filename. It should flash to alternate boot. Will correct on next update.
Regarding ur issue, you shouldnt be using my modded zips for conversion as it is already prepped specifically for Primary or Alternate boot.
The script is for converting standard .zips. like a regular nightly. Also note if ur flashing a new rom over default setup. It is recommended to format /system1, /data1 for primary & /system2, /data2 for alternate.
Thanks again for pointing out that error!
Sent from my NookColor using Tapatalk
I figured the issue might be with using the modded zips, but I wasn't sure. Thanks!
Related
EDIT: The below issue has been fixed. Here's the guide: http://forum.xda-developers.com/showthread.php?t=1110599
---
Howdy folks!
I've just bought a Nook Color, and I followed these instructions to the letter:
http://wiki.cyanogenmod.com/index.php?title=Barnes_&_Noble_Nook_Color:_Full_Update_Guide
(I've done it before and it worked perfectly)
However, this time after installing CM7 and the GApps zips, I reboot and I cannot see the Market app. It doesn't exist. (see attached image).
I thought maybe it was just a problem where I simply have to add a google account...
I go to menu->settings->accounts and sync->add account
Rather than the normal "choose an account type" dialog, It says "you can configure an exchange account" and I am not given the option to choose a Google account.
I reimaged a different SD card and rebooted into recovery using that card and wiped data, wiped cache, installed CM7, installed gapps, and rebooted.
Once again, the same exact issue.
I reboot to recovery again and this time I just install gapps and reboot... same issue...
Any help would be extremely appreciated, and if you can solve this problem for me, I'll even 'donate' 5 bucks if you have that set up.
Any help or advice would be greatly appreciated here.
Thanks!
Could it matter what version of CM7 you're using?
Thank you for the response.
I've tried CM7.0.3 and the latest nightly [today]
Google Apps pretty clearly did not install. My best guess is either you somehow grabbed the wrong package or your download just got corrupted. You should scrap the gapps...zip you downloaded and re-download this package:
I just tried it to double-check, and the main download link was flagged malicious by Avast and didn't load, so I used the mirror. Try that.
With CM7 installed, make sure Wi-Fi is set up (sometimes prevents complications), then reboot into ClockworkMod Recovery. Insert the SD card with the new gapps-gb-20110307-signed.zip file in the root directory. Choose "install zip from sd card," then "choose zip from sd card," then "gapps-gb-20110307-signed.zip," then "Yes."
You should see some text in the bottom half of the display indicating that the install is proceeding, and eventually that it has finished. Click the power button to back out to the main menu, then "reboot system now."
If that doesn't do it, I've about exhausted my knowledge.
Hello, and thank you for the reply.
I've tried it on two different sytems on 3 different nooks with 3 different SD cards and various different versions of gapps and CM7 including the nightlies.
This problem started when the nooks with the "green stickers" came out.
(Green sticker indicates that it has the new version of Nook software, while a blue sticker indicates that it has the weird new partitioning scheme. These do not have the blue sticker.)
I've tried enabling wifi and whatnot, and then reinstalling the gapps package but no bueno. The apks don't even seem to exist in the system\app directory.
This is a global problem with any new Nooks. I think i just happen to be one of the first ones to experience it.
Sent from my Transformer TF101 using XDA Premium App
This has been an ongoing problem for me since I came back to CM7 from HC last week. I don't think it has anything to do with the old or new because I got my NC on launch day.
I had figured that it was just something I had done (I get distracted easily so following directions is....oooooh! A bunny! ) but I've reflashed CM7 and GApps 3 seperate times.
It's only really an annoyance for me since I had most of my apps backed up and I've managed to get the Amazon store and AppPlanet up and running. I'd just like to get the Google market running just so I can have the Trifecta.
I really hope we can figure this out. I know this can't be just me.
What actually happens when you try to install the gapps zip? Does CWM indicate that it is in fact installing the package, and then that it's done?
Taosaur said:
What actually happens when you try to install the gapps zip? Does CWM indicate that it is in fact installing the package, and then that it's done?
Click to expand...
Click to collapse
indeed it does
some added info:
on the "green sticker" nooks, when you try to flash the update OR the gapps, it says it can't mount system or data to make logs, but still seems to work fine. If I manually mount system or data first, it doesn't throw the errors. After flashing CM7, I get fewer errors. CM7 flashes just fine, and the gapps install and CM7 both say install completed, it's just the gapps that don't show up :S
I've heard some people were having trouble flashing the latest stable 7.0.3 and getting gapps to install. This worked for me. I flashed cm7.0.2 from cyanogens site and the google apps add on on the same page. I then flashed 7.0.3 without the google apps add on included with 7.0.3 and it worked. Hope that helps some people
I'm not really sure what you're saying. The gapps aren't installing is the problem.
S/He's saying try installing the previous stable build and see if gapps will install with that. If so, you can then upgrade to 7.0.3 and gapps should remain in place. Technically that's what I did, just because the new stable came out after I had 7.0.2 up and running on SD, but I didn't have any problems flashing gapps with the 7.1 beta to eMMC later on.
ah, I see - I tried that. in fact, I know that on previous versions of the Nook, the gapps installed just fine. I think it's something to do with the 'green sticker nooks'.
I hope this gets or has gotten solved as I just bought a "green dot" NC.
The issue persists, I'm afraid. While it seems I'm not the only one with the problem, there appears to be no solution.
Update: The issue persists on the "blue dot" nooks.
Several 'green-dot' owners have reported installing everything just fine, so that may not be the source of your woes. Have you tried the repartitioning thread for blue-dots, even though you don't have a blue-dot? It seems like your best bet is to one way or another get your NC into a state identical to machines that aren't having this issue.
Taosaur said:
Several 'green-dot' owners have reported installing everything just fine, so that may not be the source of your woes. Have you tried the repartitioning thread for blue-dots, even though you don't have a blue-dot? It seems like your best bet is to one way or another get your NC into a state identical to machines that aren't having this issue.
Click to expand...
Click to collapse
yes sir, I've repartitioned as well.
Could it be the fact that I'm using CWM 0.7?
thisnameissoclever said:
yes sir, I've repartitioned as well.
Could it be the fact that I'm using CWM 0.7?
Click to expand...
Click to collapse
0_o where did you even get something like that? The current version is 3.0.2.8
You need one of the images from here: http://forum.xda-developers.com/showpost.php?p=13283643&postcount=34
I used the one on the CM7 wiki but I can see that wiki has been updated this week. I will try the one you linked and get back on this thread if it works. Thanks a ton. Hope this hasn't all been due to my retardedness. B-)
Good day all. I recently bought a Nook Color. I'm running CM7.0.2 along with gapps 20110613 from a 16gb SanDisk class 4 SD. When set up the apps (after enabling wifi) I got an error, due to the fact that my sucky router dropped the signal. As a result of this I was not able to download gmail, google maps, etc. My android market runs perfectly but I wanted to flash gapps so as to download gmail and the others. I went into ROM manager and updated to the latest CWM. However, no matter what I do I can't but into recovery. I tried n+power button, reboot into recovery from the power button menu, and from within ROM manager. All no go...it just booted into CM7, so I removed the SD card to boot into stock Nook 1.2 software. When I did this it brought me to the CWM recovery menu (SD card not in). Of course I could not select anything on the menu. Put back in the SD while still in the menu to try select an option but nothing. Shut it down by holding the power button and booted it back up and it went str8 into CM7. Shut down took out SD and it booted into stock Nook 1.2 software. What am I doing wrong guys? I'm trying to flash the overclock kernel and reflash gapps. THANKS
Could the reason gmail, youtube, googlemaps didn't install on setup be due to the fact that I'm not in the USA? If so I'd still like to know what the problem is so I can flash the overclock kernel.
No one has any idea? I know one option is to backup and redo everything, but I'd really like some troubleshooting ideas before.
Did you use the 1.3 image from verygreens thread? If so the old 7.0.* stables are not supported. You will need to back up and redo it either with the old image or a new CM7 version.
---
- Sent from my LG Optimus V using Tapatalk
Yea I used the 1.3 in the thread with 7.0.2. What version cm7 would I need to use with the 1.3? 7.0.3 or a nightly,? Where would I be able to find an older image to work with 7.0.2 and what version of the image should it be?
The 1.3 image won't work with any 7.0.* versions. You should upgrade to either a recent nightly or the 7.1.0 RC. You could find an older image somewhere but there isn't much of a point as you would have to redo it all anyway so why not upgrade? Plus your battery life will improve by a lot as 7.1 RC and the nightlys have deep sleep.
---
- Sent from my LG Optimus V using Tapatalk
As I said many times to newbie who runs CM7 off uSD that do not or should not mess up with ROM Manager. In fact, there are members also confirm that if booting off uSD, ROM Manager has no effect.
Based on what you, OP, described, you had flashed the CwM into the internal memory.
Keep your fingers crossed as I do hope you didn't screw up anything else.
Anyway, using verygreen's 1.3 image along with the latest nightly-built CM7 and the latest 06132001 gapps and boot it off uSD again. You should be fine.
Before that, fix your home wireless network first.
I decided to just go with 7.1RC1 since I wanted the better battery life. Is there a way to check about the CWM on the internal and how would I go about removing it if I did? I ask for warranty purposes ofcourse since I opted for the 2 year extended one. Also to flash upgrades and such, since you don't recomend using ROM manager then how should I go about doing it (i.e. overclocking kernel)?
dna59 said:
I decided to just go with 7.1RC1 since I wanted the better battery life. Is there a way to check about the CWM on the internal and how would I go about removing it if I did? I ask for warranty purposes ofcourse since I opted for the 2 year extended one. Also to flash upgrades and such, since you don't recomend using ROM manager then how should I go about doing it (i.e. overclocking kernel)?
Click to expand...
Click to collapse
1. I never have any issue related to battery with any nightly build that I've ever used. I am currently having the nb153 and it is fantastic.
2. Check CwM and how to remove off the internal memory? I don't know any quick way except restoring the original ROM.
Again, for warranty purposes, strongly suggest running off uSD
3. Updating by loading/copying/dragging the updated files onto the root folder (aka "boot" partition), then TRY loading into Recovery by:
a. combination of power/N buttons if you have skill or
b. let it boot normally into CM7, wait until completely loaded, then reboot and select "recovery" option. Keep yr fingers crossed. This is an easy method but if it doesn't work then option a is the only choice.
Sorry the battery issue was as compared to the current CM7 stable not the nightly. I got everything installed so far besides the overclock kernel. So I will try your recommendation for booting into recovery not using ROM manager.
You don't flash anything when running off an sd card you just boot into recovery and then reboot. Easiest way to get the overclock kernel would be to just upgrade to the latest nightly.
---
- Sent from my LG Optimus V using Tapatalk
Update 20111117: Updated .zip file to Adobe Flash 11.1 and AIR 3.1.
Update 20111020: Updated .zip file to reinstall Flash and AIR, previous version didn't properly fix AIR.
Steps I used to update Adobe Flash (to version 11.0) and AIR (version 3.0) so it doesn't update automatically and thus get me back into the boot loop cycle (again):
Go to Titanium Backup ( Pro )
You need to uninstall with this since these are system apps
Buy a Pro key and keep it on your SD card root, since this app will save your bacon
Uninstall Adobe AIR and Adobe Flash Player from Titanium Backup
It will warn you that you are uninstalling a system app, that's OK
I think that is why the update through Market isn't working
Open Market, Install Adobe Air (3.1.0.488 as of this post) and Adobe Flash Player (version 11.1 11.1.102.59 as of this post)
Nook seems to be working after several reboots. Also, note that Adobe updated their apps. After following the procedure above, I was able to update via Market without any problems with bootlooping.
Obviously, the above steps only work BEFORE Adobe gets auto-updated and you get in the boot loop cycle. If you are already in the boot loop cycle, download this file (Updated link, should work better this time):
FlashPlayer11.1_AIR3.1_Update_Fix_20111117
and install it using a ClockworkMod Recovery SD card.
Get a ClockworkMod Recovery SD card
http://forum.xda-developers.com/showthread.php?p=11987469
Put the zip from the above post on the SD card
Reboot your Nook with the SD card inserted
Install from Zip, Select zip from SD card, select the flash update
This basically will uninstall flash and air as system apps and install as a user apps. This is based on the zip from GMPOWER which updated flash to 10.3, which worked for some but not others, perhaps because it didn't touch Air:
http://forum.xda-developers.com/showpost.php?p=16526691&postcount=7
Also note, I have been through several cycles of restoring backups, restoring to factory, re-rooting, etc. this last week, so I was getting very annoyed and cautious. I think I was able narrow it down to just the Adobe updates causing my problems. I have been able to update ROM Manager, Superuser, and just about everything else with updates; and besides the Adobe updates, everthing worked, and I don't currently have a boot loop problem.
Note, I didn't update Superuser or ROM Manager until after I applied the above updates to Flash and AIR. After several reboots, my Nook is still working fine.
For those of you who are still having trouble getting your Nook back, and the attached zip doesn't work for you, you can do the following. Using the instructions on this site, I got my Nook back up and running to factory new condition:
http://mrm3.net/nook-color-recover-any-bricked-device/
(Quick method at top, not older methods below; instructions slimmed down from several posts here at XDA, updated for stock 1.2) also here on XDA:
http://forum.xda-developers.com/showthread.php?t=914690 (original restore to stock post)
http://forum.xda-developers.com/showthread.php?t=1050520 (update for stock rom 1.2)
Then, I registered my Nook (again).
At this point, I could have tried to update to 1.3, but my patience was a bit low, so I didn't go for it. If you do, be sure to follow the appropriate ManualNooter instructions here:
http://forum.xda-developers.com/showthread.php?t=1054027
Since I was still on Stock 1.2, I rooted using ManualNooter 4.6.16
(while in CMR, after running ManualNooter, I also applied update-Froyo1.2-dalingrin-OC-emmc-090111.zip, and that seemed to work without a hitch)
Then I reinstalled all the other apps I wanted on my Nook,
=== BUT DID NOT YET UPDATE ADOBE FLASH OR AIR ===
Flashed ClockworkMod Recovery, updated a lot of my apps using Market and Amazon Appstore, restored data and other apps from Titanium Backup,
Then I made a full backup of my Nook using CMR. (still booting normal, running fast and clean)
After confirming my Nook was as I wanted it, and that I had a good backup, I did the steps at the top of this post to update Adobe Flash and AIR.
After confirming that was working, and getting another backup on my SD. I then did the updates to ROM Manager and Superuser. It seemed like those updates happened at the same time as the boot loop, so I was cautious. My Nook is still working well without boot loops as of yet.
Results:
Kernel: Stock 1.2
Rooted with: ManualNooter 4.6.16
Additional Mods:
update-Froyo1.2-dalingrin-OC-emmc-090111.zip,
ClockworkMod Recovery 3.2.0.1,
ROM Manager 4.5.0.1, Titanium Backup 4.5.2,
Adobe Flash 11.1, Adobe AIR 3.1 (uninstalled system app, reinstalled via Market, updated via Market)
[Update Zip] CMR zip to update Flash Player and Air
I updated the original post with a link to the zip to fix the FlashPlayer and Air apps. I had intended to post it here, but since I'm new, I can't link externally in a reply.
Please let me know if there are any problems with the zip and I will get it updated. It worked on my Nook.
I updated the zip file 20111020 to fix a problem with the AIR reinstall.
Wow, thank you so much for this! I wish I had known this on the weekend when I was gong crazy trying to figure out why I was getting bootloops over and over. I can't seem to give you thanks though (probably because I never post, just lurk).
So far I haven't done the uninstall/re-install with TB. I am just making sure my Adobe air and Flash don't update, and when Air did I went into Nook Color Tools and uninstalled the update to set it back to what it was originally. That worked but it is a pain if it keeps happening. I will try the TB to uninsall the programs.
I too did a update on ROM Manager and Superuser (and a binary update), and all is still well. No bootloops. I hold my breath though every time my NC gets to the "color" part until the N appears and it all disolves.
thanks for this!!! this was really getting very frustrating.
Well while I would like to report that the flash fix worked, it didn't. It was already on the boot loop so I installed the update with a flashed SD card and nothing. Still stuck in a boot loop. At this point I am just about ready to give up on this device being a fully functional tablet.
Thanks for this information. My nc is currently in a bootloop and won't load CWR. It shuts off before getting to that point (my bootloop is adobe air related). None of the restore to stock via SD card have worked for me. I'm now looking at ADB options, the post you referenced with the fix has some instructions for that. Did you use the ADB or the SD card instructions? I was actually rooted with CM7 before the bootloop.
Thanks,
shy guy1 said:
Well while I would like to report that the flash fix worked, it didn't. It was already on the boot loop so I installed the update with a flashed SD card and nothing. Still stuck in a boot loop. At this point I am just about ready to give up on this device being a fully functional tablet.
Click to expand...
Click to collapse
I realized that my zip was not working to uninstall and reinstall Air properly. Try the updated zip file in the post.
shelly29 said:
Did you use the ADB or the SD card instructions?
Click to expand...
Click to collapse
I used the SD card instructions. Unless you have done something strange to your nook (not sure what), it should always boot from the SD card first, so you should never have problems booting into CMR from an SD card.
If the link in the original post doesn't work for you to get a CMR SD card, try the instructions here:
http://mrm3.net/nook-color-updated-clockwork-recovery-bootable-sd/
If you have a newer Nook, you may need to repartition your Nook's internal memory and use CMR version 3.2.0.1. See details here (this guy just condenses the instructions you can find on various posts on XDA, and tries to keep it up-to-date)
http://mrm3.net/nook-color-how-to-blue-dot-nook-color/
Also note that I updated the zip file in the post to correctly uninstall and reinstall Flash. I re=bootlooped my nook, and after applying the new zip, my nook was working.
Just an update....
I wanted to let U guys know that I had updated Adobe Flash, Air and Super Users and this has worked for me. I also went to double check the versions of both Flash an Air and they are the newest versions!? I still went to uncheck the "Update Automatically" setting in the market for them both just in case for future updates for the time being. Back up and Running! Thanks Again to ALL involved who put contributions to this
This may have worked for me
I tried the updated fix posted here, and the Nook booted properly. Thank you for this fix; I hope it continues to work for me.
I will have to locate the automated back up mentioned here (Titanium), and I will see how this works. I had been leaving my Nook on at all times to avoid the reboot until I turned it off yesterday, forgetting that I did not want to do that.
Awesome post.
So...after all this is said and done and I manage to get a restore image to load and actually boot, now the library doesn't sync and the shop won't load and I get error messages such as " internal error exception executing the command ". It is like the B&N servers are confused. Any ideas about that?
I'm having the boot loop issue and neither the zip nor the 1.2 restore work to get past it. Does anyone have any ideas?
Thanks!!!! You are my new best friend. XD I ended up reflashing several times before I found this post. Followed the instructions and my Nook is happily running Android again without reinstalling (again!). I thank you. My Nook thanks you. And the Angry Birds who would have had to start from scratch thank you.
Thank you! It appears to work now. I've restarted a few times with success!
Took me about an hour to find this thead. I knew there would be an easier fix than starting from scratch. The zip worked on my rooted 1.2
Thanks! Keep up the good work
Thanks! That worked for me.
Stagnation1 said:
I'm having the boot loop issue and neither the zip nor the 1.2 restore work to get past it. Does anyone have any ideas?
Click to expand...
Click to collapse
From my previous searches, it seems the boot loop is usually caused by either an incompatible installation of Adobe flash, or an incompatible kernel (central part of the ROM). Hopefully the OP zip will fix the first, but I'm not sure of another way to fix the second, other than reflashing and rerooting. How far in the reflash/reroot process do you get before it boot loops again?
mastigia said:
So...after all this is said and done and I manage to get a restore image to load and actually boot, now the library doesn't sync and the shop won't load and I get error messages such as " internal error exception executing the command ". It is like the B&N servers are confused. Any ideas about that?
Click to expand...
Click to collapse
Hmm, haven't seen that error. I'm not sure whether its related to the same problem. It sounds like you might need to re-register your nook with B&N. I'm not sure if you can do this without restoring to stock. Not much help, sorry.
I can't post a reply to this ([NC][1.2][1.3] ManualNooter 4.6.16) thread yet - Still new to these forums... I was one of the many in that thread who had installed ManualNooter 4.6.16 on Nook Stock 1.3 only to end up with a boot loop.
Wish I had found this thread last week - would have saved me a lot of headaches!
It's okay though - every boot loop is another opportunity to learn something new.
Thanks much for the easy walkthrough and I hope others find their way here too.
Just saw another new update for Flash & Air .. released yesterday I believe. Has anyone try them yet ? Just don't want to was my time getting into a boot loop again by updating it.
--
I installed CM9 Eyeballer the other day on my NC. It pretty much works, but if I go into the web browser or any other factory-installed app, hitting the "N" button takes me back to the factory-installed home screen, and I can't find any way to get back to the Android home screen, short of rebooting the device. Is this normal?
Also, I flashed Gapps using gapps-20120429-ics-signed.zip, and the only Google App that appears is Play Store -- I was able to sign in, but the next screen gave me a "Server Error," and that's all it's done since. I verified the md5sum, and also tried again to install it. No change. Is there some version conflict, or something like that?
Edit: did not install CM9, after all. I now have.
What is the 'factory installed home screen'? You mean stock? That is not possible if you installed CM9 over the top of stock on emmc. Can you explain a little more how you installed it and what you mean.
Well...
I followed the directions as closely as I could: create a recovery chip, copy over the zip file (manualnooter-5.08.20-apps2sd.zip), reboot, install from zip file, install Manual Nooter, flash update-Froyo1.2-dalingrin-OC-emmc-090111.zip, install Gapps, reboot again. As far as I could tell, my results were consistent with the directions, up until the symptoms I described. For example, the splash (smash) screen is right, and the rainbow-y thing, and so on.
This partial success is even more frustrating than a total failure.
estebandido said:
I followed the directions as closely as I could: create a recovery chip, copy over the zip file (manualnooter-5.08.20-apps2sd.zip), reboot, install from zip file, install Manual Nooter, flash update-Froyo1.2-dalingrin-OC-emmc-090111.zip, install Gapps, reboot again. As far as I could tell, my results were consistent with the directions, up until the symptoms I described. For example, the splash (smash) screen is right, and the rainbow-y thing, and so on.
This partial success is even more frustrating than a total failure.
Click to expand...
Click to collapse
Your original post said you installed CM9. You did not. You just rooted your stock rom. You might want to edit the title of the post to 'Manual Nooter installed properly, Gapps not working. Then take that CM9 Eyeballer statement out of the text in the first post and you might get some proper responses from folks.
Sure enough.
leapinlar said:
Your original post said you installed CM9. You did not. You just rooted your stock rom.
Click to expand...
Click to collapse
Ah... I was under the impression that Eyeballer was a version name of CM9. None of the sets of instructions I read made it clear to me that wasn't the case.
I ended up doing a factory reset, then reinstalling everything. The picture is far rosier now -- it finally looks the way I pictured!
Thanks!
estebandido said:
Ah... I was under the impression that Eyeballer was a version name of CM9.
Click to expand...
Click to collapse
Eyeballer does build a version of CM9. But that has nothing to do with what you did. You ran Manual Nooter, which is a tool to root your stock installation. CM9 is a completely different version of Android than stock is. And when you install CM9, your stock is completely removed and replaced by CM9.
You do not have CM9 installed, you have just rooted your stock rom.
Anyway, I'm glad you got it working.
Edit: I see you modified your original post to say you did later install CM9.
[ROM][NC] Unofficial CM9 Nightly builds - with/without OpenGL
I don't have enough posts in XDA to post in the (goo dot gl/vPJcM) actual ROM thread so I'm hoping someone will see it here.
After installing the CM7 ROM a long time ago. they Nook wasn't able to boot into CWM. I can only access the recovery using a bootable SD card. That may or may not matter.
Yesterday I installed both the 3 SEP OpenGL and 4 SEP versions of Eyeballers CM9 ROM along with GAPPS. In both versions I cannot get bast the Setup Wizard since it "unfortunately Closed" every time I "touch the Android".
I did install the ROM w/o GAPPS as a temporary fix but will need to eventually access the Play Store.
I did notice that CWM still wont boot into recovery and the Cyanoboot won't either. Cyanoboot takes me to what appears to be a stock Nook screen claiming that an install has failed and that I should power on/off or contact customer service.
Does anybody have any suggestions?
Thanks!
JC
jerrycrabb said:
I did notice that CWM still wont boot into recovery and the Cyanoboot won't either. Cyanoboot takes me to what appears to be a stock Nook screen claiming that an install has failed and that I should power on/off or contact customer service.
Click to expand...
Click to collapse
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.
From what I can tell, Eyeballer is mostly drinking.
leapinlar said:
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.
Click to expand...
Click to collapse
Thank you very much for the response, I will try this as soon as I get some time (I have a selfish new baby) and get back.
leapinlar said:
You do not have CWM installed on internal memory (emmc). That message you are getting means you still have the stock recovery there. You need to flash a CWM to emmc using your bootable CWM card. Look in my tips thread linked in my signature. Look at item A8 and the subheading 'to fix a corrupted or missing recovery on emmc'.
I don't know how to solve your other problem with gapps, other than to do a factory reset with CWM.
Click to expand...
Click to collapse
Success! errr..sort of.
Prior to flashing gapps I was able to reboot into CWM. Thank you so much for your help!
Still having the same issue with setup manager after factory reset and wipe of all cache.
If anyone has a work around or another suggestions for CM9 on the NC I'd much appreciate it.
Thanks again.
Hello XDA peeps.
I've had my Nook color for about 3+ years. Have had both my wife and mine running old versions of CM7 on the SD card without issue.
I recently dug mine out to set up for the kids (for a trip we're taking starting this weekend) and first installed CM10 (10.3 I think). loaded and was able to get apps running w/o issue but the poor old Nook and CM10 was so sluggish I felt it was just too much for this legacy device, so I reflashed to the CM7.2.0 [stable]
loaded just fine, but when I went to install GAPPS it installed fine, but will not allow me to access my account now.
no matter how many times I try, it tells me the password does not match for my account.
I know for a fact the password is the right one, and I can get on the Play store just fine on my Galaxy S3 using the same credentials.
I even reflashed the GAPPS to an older version and no luck.
Any thoughts? Really stuck here, since we're leaving Saturday morning and I want to have both Nooks up and running current versions of our boys fav games to pass the time. right now it has no app store, so it's pretty much a stripped Android tablet.
~poz said:
Hello XDA peeps.
I've had my Nook color for about 3+ years. Have had both my wife and mine running old versions of CM7 on the SD card without issue.
I recently dug mine out to set up for the kids (for a trip we're taking starting this weekend) and first installed CM10 (10.3 I think). loaded and was able to get apps running w/o issue but the poor old Nook and CM10 was so sluggish I felt it was just too much for this legacy device, so I reflashed to the CM7.2.0 [stable]
loaded just fine, but when I went to install GAPPS it installed fine, but will not allow me to access my account now.
no matter how many times I try, it tells me the password does not match for my account.
I know for a fact the password is the right one, and I can get on the Play store just fine on my Galaxy S3 using the same credentials.
I even reflashed the GAPPS to an older version and no luck.
Any thoughts? Really stuck here, since we're leaving Saturday morning and I want to have both Nooks up and running current versions of our boys fav games to pass the time. right now it has no app store, so it's pretty much a stripped Android tablet.
Click to expand...
Click to collapse
You said you were running CM7 on SD. How did you install the CM10? Then what did you do to get back to CM7? What wiping did you do?
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
You said you were running CM7 on SD. How did you install the CM10? Then what did you do to get back to CM7? What wiping did you do?
Click to expand...
Click to collapse
I actually have the CM10 on the root of the device. I thought I had put it on the SD card, but didn't. (just found this out by accidentally powering on the tablet w/o the card in it)
So, currently downloading the CM 10.2.1 update (from 10.1.3), and perhaps it will fix the sluggishness.
I have a third stock Nook that I have not touched in years that I'm going to flash on the SD card...see if I can't get it to CM7.2 w/o any issues.
but previously I had wiped the card twice and attempted to Reinstall CM7.2.
I think the fault lies in the steps I was following to burn the SD card.
Told me to add the gapps AFTER installing CM7
I was pretty sure in the past I put both on the same SD at the same time.
or it is possible the Google two-step verification/authorization is not compatible with the older Market app. I can get on the Play store just fine on CM10 (but it did have me open in the browser to verify the device).
~poz said:
I actually have the CM10 on the root of the device. I thought I had put it on the SD card, but didn't. (just found this out by accidentally powering on the tablet w/o the card in it)
So, currently downloading the CM 10.2.1 update (from 10.1.3), and perhaps it will fix the sluggishness.
I have a third stock Nook that I have not touched in years that I'm going to flash on the SD card...see if I can't get it to CM7.2 w/o any issues.
but previously I had wiped the card twice and attempted to Reinstall CM7.2.
I think the fault lies in the steps I was following to burn the SD card.
Told me to add the gapps AFTER installing CM7
I was pretty sure in the past I put both on the same SD at the same time.
or it is possible the Google two-step verification/authorization is not compatible with the older Market app. I can get on the Play store just fine on CM10 (but it did have me open in the browser to verify the device).
Click to expand...
Click to collapse
I don't think CM10.2 is going to help. CM7 is the best for NC. I would wipe the internal CM10 you have on there and install CM7 to internal. Be sure to put the right gingerbread gapps on there too.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
I don't think CM10.2 is going to help. CM7 is the best for NC. I would wipe the internal CM10 you have on there and install CM7 to internal. Be sure to put the right gingerbread gapps on there too.
Click to expand...
Click to collapse
yes, thank you. I feel anything higher than CM7 just boggs the processor on these dated tablets. For a kids' tablet, it's just fine and will run most of their games/books and it remains snappy. CM10 just feels overloaded. It is sluggish and slow to respond. I'll try to get it moved back to CM7.
I've been trying to flash the other Nook, but after much effort, I have not been able to get it to boot into recovery.
I have the same card set-up, but I cannot get it to start with the card....constantly goes to the B&N root.
~poz said:
I've been trying to flash the other Nook, but after much effort, I have not been able to get it to boot into recovery.
I have the same card set-up, but I cannot get it to start with the card....constantly goes to the B&N root.
Click to expand...
Click to collapse
Sometimes it is difficult to get the NC to boot from an SD. See my NC Tips thread linked in my signature and read section A9.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Sometimes it is difficult to get the NC to boot from an SD. See my NC Tips thread linked in my signature and read section A9.
Click to expand...
Click to collapse
Thanks Leapinlar,
Still running into issues. now on BOTH Nooks.
I was pretty sure I remember something about an updated B&N ROM that was signaled with a Green sticker on the box, which the troublesome boot one has.
I am using the generic_sdcard_v1.3.img + cm-7.2.0-encore.zip + gapps-gb-20110828-signed.zip all being burned via Terminal on Mac.
The only thing that has changed since I was dabbling with these in the past was the CM release.
I am not able to find my original bookmark of the tutorial I used to use (2+ years ago) so I think there might be a flaw in the instructions I'm following now. (for instance, the instructions I'm following now, the dd= command isn't proceeded by 'sudo' and without the sudo command, it errors out when trying to write the generic SD image to the disc (says disc is not available or locked).
gonna keep trying, because I want to get these up and working for our trip...we have 36+ hours of driving over the course of a week, so I know they'll get bored of looking at sights, reading books, watching DVDs, etc. Mainly for my own sanity, since I'll be driving.
**EDIT* i found the original tutorial I used years ago in my trove of bookmarks. It was the original GlassKeys tutorial. gonna give that a shot and report back with my success/errors.
Well, one thing, if you are going to use that old original image file you need to rename the CM zip to begin with update-. That will not help with the booting issue, but will make it so that image will recognize the CM zip.
I have an updated image zip in my updated instructions for NC SD installs linked in my signature.
Sent from my BN NookHD+ using XDA Premium HD app
leapinlar said:
Well, one thing, if you are going to use that old original image file you need to rename the CM zip to begin with update-. That will not help with the booting issue, but will make it so that image will recognize the CM zip.
I have an updated image zip in my updated instructions for NC SD installs linked in my signature.
Click to expand...
Click to collapse
Thanks. should have mentioned that I did rename the file to "update"
got my old CM10 to boot into Linux penguin and it seemed to be doing it's thing, after formatting the SD card following the GlassKeys instructions, but it is now booting to CM10 still by default and if I hold the "n" key for the boot menu on Cyanoboot and try to boot from SD card (normal or recovery) it just stays on that screen until I power it down.
as for the second, untouched Nook, I did the GlassKeys instructions to the SD card for that and it loaded to Penguin and went through all the install procedures, but now it still boots to the B&N emm setup screen.
wish I had never taken the other to CM10. now I have two Nooks that aren't acting properly.
thing that bugs me is the first one was running fine, just market wouldn't recognize my sign-in...now both are jacked.:silly:
SUCCESS!!!
So thank you goes out to leapinlar!!!
I dropped what I had been doing on my system as far as the files I was burning and read over all your FAQ and tutorial.
I downloaded the files in your how-to and had the tricky OE ROM flashed in a jiff!
The second one is installing now on the peguin screen and JUST now loaded to the CM7.2 bootloader screen.
Still used the GlassKeys instrucitons on how to burn via Terminal on OS X, but used your files (generic-sdcard-v1.3-CM7-9-10-10.1-10.2-11-largest-Rev8c.zip )
My original issue, I have found through all this, was that the Market wouldn't allow me to sign in...well that is an issue with the 2-step verification for my Google account I had activated (someone tried to hack my account, so I had it on). Once I turned it off, I was able to open the market and sign in.
Thanks again for your help leapinlar....check this one off!
Going to update both tonight with our boys' fav apps and games and get ready to hit the road first thing Sat morning! :laugh:
If you want something newer I found that cm10.0 was pretty fast on nook color. Better than cm7. Anything newer I also found was to slow and laggy 10.1+. If interested the last nightly cm10.0 rom and gapps are over in the development fourm.
retrobot said:
If you want something newer I found that cm10.0 was pretty fast on nook color. Better than cm7. Anything newer I also found was to slow and laggy 10.1+. If interested the last nightly cm10.0 rom and gapps are over in the development fourm.
Click to expand...
Click to collapse
Thanks! but pretty happy with CM7. any more seems to be a bit much for these processors. both are up, loaded full of games/books and ready for the road trip. :highfive: