hello.
i use ics 2.11a update2
can i change splash screen
if yes how?
thank you
if you mean the boot animation, i personally use "rom toolbox"
i'm sure there's other apps yo do it,
and there's threads explaining how to do out manually if you wish to do so
Sent from my Ideos X5 (Aurora ICS) using xda premium
hi
i dont talk about bootanimation.
about red huawei logo.
thank you for reply
if I remember right this will work:
Install adb + fastboot to computer (if you have Mac, I can help with this)
USB debugging on
connect u8800 to computer
Run these commands:
adb reboot bootloader
fastboot flash splash
fastboot reboot
I haven't tested it.
Sent from my U8800 using Tapatalk 2
Qqqxxxzzz
Mobile Networks --> Network Operators is unable to search for networks (both automatically and manually).
It says "Error While Searching for Networks".
qqqxxxzzz now showing this problem how i can connect 3g data ?
Did you have this problem before flashing splash?
I can't help.
I said: I haven't tested it.
try reflashing firmware.
Did bootlogo change?
mmcblk0p5 holds the splash image with some other update images. If we can extract those, we can change the logo too.
I tried using some tutorial, but the image was corrupted, as it contains other images too.
This has already been answered here http://forum.xda-developers.com/archive/index.php/t-1162223.html
ezet said:
This has already been answered here http://forum.xda-developers.com/archive/index.php/t-1162223.html
Click to expand...
Click to collapse
this answer not apply for ICS.
ezet said:
This has already been answered here http://forum.xda-developers.com/archive/index.php/t-1162223.html
Click to expand...
Click to collapse
vidinli said:
this answer not apply for ICS.
Click to expand...
Click to collapse
It's for 2.2
We need new guide for 2.3 (ICS is 2.3 based)
Sent from my GT-P1000 using Tapatalk 2
For Stock .35 roms i think it's in the cust.img file, but i don't know where it is in ICS
/.cust_backup/image/cust.img
Sent from my U8800 using Tapatalk 2
Related
Hello a friend need help he just flashed his phone LG GT540 to stock 2.1 succesfully but then when he tried to n flash to 2.3.3 v1.8 he got a problem when it boots if "it boots" he can't see LG logo and the animation also he can't enter to recovery mode nothing appears. I know i have read about this problem but as you know guys it is very annoying look between many posts so PLEASE if anyone has had this problem and found a solution would be nice if you post it here.
Also i would like to create a thread with all possible errors, problems and fixes, this will be very helpul for new users and even old users if they ever have any problem while flashing. So please think about this i think IT IS VERY NECESARY or a MUST for all of us. If you ever had a heavy problem with your phone you will understand the needing of this.
Support and ideas needed for create a super LIBRARY of all possible problems and fixes found so far.
EDIT: OMG i just see it has created 2 exactly posts please mods remove one, i dont know what happened
THANKS! your friend veronica
try flashing a 2.1 backup then flash to 2.2 then to 2.3
Sent from my GT540 using XDA Premium App
eoghan2t7 said:
try flashing a 2.1 backup then flash to 2.2 then to 2.3
Sent from my GT540 using XDA Premium App
Click to expand...
Click to collapse
hmmm how will he flash a 2.1 backup if he cant enter to recovery
flash via fastboot
Sent from my GT540 using XDA Premium App
eoghan2t7 said:
flash via fastboot
Sent from my GT540 using XDA Premium App
Click to expand...
Click to collapse
Like eoghan said...
Go into fastboot, erease everything, flash 2.2 froyo, maybe the superfastfroyo and a newer clockworkmod.
After that, boot into the OS and check if its working without problems.
Then go into Clockworkmod and install the 2.3.3 over ZIP, not fastboot.
After installation, wipe the system, factory res. and boot into it.
I think its gonna work without any problems !
If that doesent work... just try to install and older version of Clockwork MOD over fastboot:
fastboot -w
fastboot erase recovery
fastboot flash recovery "your_recovery_clockwork"
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
Thank you I hope it works
Sent from my GT540 using XDA App
torq1337 said:
Like eoghan said...
Go into fastboot, erease everything, flash 2.2 froyo, maybe the superfastfroyo and a newer clockworkmod.
After that, boot into the OS and check if its working without problems.
Then go into Clockworkmod and install the 2.3.3 over ZIP, not fastboot.
After installation, wipe the system, factory res. and boot into it.
I think its gonna work without any problems !
If that doesent work... just try to install and older version of Clockwork MOD over fastboot:
Click to expand...
Click to collapse
Hey Vero, You try it??
It worked?
BRONCHAS said:
Hey Vero, You try it??
It worked?
Click to expand...
Click to collapse
No ym friend is scared and doesnt want to try lol but ill let you all know guys if it works, or maybe another user that has the same problem try it and let us know
Oww..
Does it work?
The lg logo at the start is like the bios/motherboard logo some pc's show at boot
if it doesn't show up does that mean that the bootloader didn't get flashed right which again means that he/she has bricked the device :c
Moonystorm said:
Does it work?
The lg logo at the start is like the bios/motherboard logo some pc's show at boot
if it doesn't show up does that mean that the bootloader didn't get flashed right which again means that he/she has bricked the device :c
Click to expand...
Click to collapse
I think you are right :/ if the boot is destroyed, you will need to get it flashed by a pro
Hey, try this one
http://forum.xda-developers.com/showpost.php?p=10238074&postcount=41
A lot of people have this problem. It seems that is the only way to fix it. I followed that solution and I got my LG boot logo back.
Hope this will help you.
It's so hard to brick a GT540. You can always recover using kdz emergency mode if the phone will enter download mode. The link above WILL restore your boot process and then you can flash whatever you want to... Probably a fastboot 2.1 kdz and then recovery and then Mur4ik 2.0
Sent from my GT540 using XDA Premium App
As the title says, After I unlocked the bootloader, and flashed a 2.3.4 rom, My Atrix sometimes will go up to the blur phase of the boot and then it will restart, but most of the time will just do a boot loop on the Red Moto Logo at boot, I can go into fastboot and recovery no problem...
Thanks on any help...
same thing
i get the same thing every now and then but i can get fastboot and recovery so im good i guess.
Did you wipe before you installed your ROM?
Do a fastboot -w then reinstall your ROM.
also do a factory reset and make sure your on the newest recovery
quicklyspent said:
Did you wipe before you installed your ROM?
Do a fastboot -w then reinstall your ROM.
Click to expand...
Click to collapse
Did the fastboot -w and reinstalled the ROM and it is doing the bootloop the same, first boot goes up to the blur phase and reboots, and afterwards just does the boot loop up to the motorola dual core red logo.
TechnoNeto said:
also do a factory reset and make sure your on the newest recovery
Click to expand...
Click to collapse
I have the latest recovery, thanks...
Flash back to stock and follow my guide
Sent from my MB860 using XDA Premium App
TechnoNeto said:
Flash back to stock and follow my guide
Sent from my MB860 using XDA Premium App
Click to expand...
Click to collapse
Where can I find your guide, and should I SBF 1.83 or what..
It's in general under video how to go... Sorry I'm on my phone
Sent from my MB860 using XDA Premium App
http://forum.xda-developers.com/showthread.php?t=1179506
Sent from my MB860 using XDA Premium App
Did you make sure to use tenfar's CWM instead of ROM Manager's? My 2.3.4 install also bootlooped, and that ended up being the issue.
Sent from my ATRIX running CherryBlur 1.3.
I'm still having issues, I have the latest Recovery, and I have tried to flash through Recovery and still get the boot loops...
Just Flashed via RSD the SBF 1.2.6 and still have the reboots, I think that my phone it's bricked, I can go into RSD, Fastboot, Recovery, everywere, I can flash anything, but when it boots, it does a bootloop everytime... I
If someone has an answer please help...
poorg said:
Just Flashed via RSD the SBF 1.2.6 and still have the reboots, I think that my phone it's bricked, I can go into RSD, Fastboot, Recovery, everywere, I can flash anything, but when it boots, it does a bootloop everytime... I
If someone has an answer please help...
Click to expand...
Click to collapse
Take out the battery for 30 sec and then put it back press vol up while you turn on.... can you please post what it show up in your screen after this?
Sent from my MB860 using XDA App
mramirezusa said:
Take out the battery for 30 sec and then put it back press vol up while you turn on.... can you please post what it show up in your screen after this?
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Starting RSD protocol support....
poorg said:
Starting RSD protocol support....
Click to expand...
Click to collapse
Ok I will post a guide and follow up give 1 minute
Sent from my MB860 using XDA App
mramirezusa said:
Ok I will post a guide and follow up give 1 minute
Sent from my MB860 using XDA App
Click to expand...
Click to collapse
Thanks for the help, really appreciate this...
poorg said:
Thanks for the help, really appreciate this...
Click to expand...
Click to collapse
Ok maybe is time for clean starp up, DEEP CLEAN, I did this script for a friend and it help:
Need Windows PC and UNLOCKED BOOTLOADER (when I said unlocked bootloader need to be that everytime you boot you saw "unlocked" tag at the left top corner)
1. Download and extract/unzip the following file in a new folder (example C:\atrix):
http://www.filesonic.com/file/15073...signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
2. You will end after extracted/unzip the file with something like this:
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
3. Download this file "CLEAN_2.3.4_ATT.zip" and extract/unzip to the same location (example C:\atrix)
http://forum.xda-developers.com/attachment.php?attachmentid=673330&d=1312203457
5. Run the script "clean" and follow exactly all the instrucctions!
6. This will install a Pristine Official ATT GB 2.3.4/4.5.91
Done!
Hope it help
mramirezusa said:
Ok maybe is time for clean starp up, DEEP CLEAN, I did this script for a friend and it help:
Need Windows PC and UNLOCKED BOOTLOADER (when I said unlocked bootloader need to be that everytime you boot you saw "unlocked" tag at the left top corner)
1. Download and extract/unzip the following file in a new folder (example C:\atrix):
http://www.filesonic.com/file/15073...signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf.gz
2. You will end after extracted/unzip the file with something like this:
1FF-olympus-user-2.3.4-4.5.91-110625-release-keys-signed-ATT-US-GAS_NA_OLPSGBATTSPE_P011.sbf
3. Download this file "CLEAN_2.3.4_ATT.zip" and extract/unzip to the same location (example C:\atrix)
http://forum.xda-developers.com/attachment.php?attachmentid=673330&d=1312203457
5. Run the script "clean" and follow exactly all the instrucctions!
6. This will install a Pristine Official ATT GB 2.3.4/4.5.91
Done!
Hope it help
Click to expand...
Click to collapse
Ok, but mine does not say unlocked right now, I did Unlock the bootloader but after I flashed the 1.2.6 SBF it does not say it!!!!
I noticed you posted that you actually have unlocked bootloader just make sure that when you turn on the phone it said in the left top corner "unlocked", if it is not that case just follow intructions on this post:
http://forum.xda-developers.com/showpost.php?p=15930466&postcount=1
download the script and select option 1 from the main menu and then option 3 and complete all the steps
so you can re unlocked the bootloader
then follow the instrucionts that I posted before here
mramirezusa Thank You.... As you stated, everything went smoothly and my phone it's perfect again, something I noticed, when it boots, it's does not say unlocked anymore shoul'd I do the procedure with the the script that you sent posted above...
I flashed a patch for the tablet UI, but after it installed, it is stuck in CM10 animation. Tried to manually boot into recovery and its stuck on Google with the unlock sign. Imma nubee sorry... Please i really need some help.
Have you tried to hook up to a computer and try command adb reboot recovery?
akamachine45 said:
I flashed a patch for the tablet UI, but after it installed, it is stuck in CM10 animation. Tried to manually boot into recovery and its stuck on Google with the unlock sign. Imma nubee sorry... Please i really need some help.
Click to expand...
Click to collapse
Travisdroidx2 is right. You simply need to connect your N7 to a computer's USB port and then you can access recovery mode via the steps you mentioned or via adb. It's a bug that Google is going to fix eventually (I hope).
Sent from my Paranoid Nexus 7
Hi,
If you wish to use Tablet UI, I would recommend you to flash my rom It is called 'SmoothROM'
Thanks
Sent from my Nexus 7 using Tapatalk 2
How?
how do i do the ADB recovery??
Def, i will check out your ROM. post me the thread.
I GOT IT!!
Thank you so much!!
i check the tool box for nexus 7 and did like you said adb recovery and got it to restore.
THANK YOU!! seriously!!
LOVE XDA!!
LOVE ANDROID!!
jamesst20 said:
Hi,
If you wish to use Tablet UI, I would recommend you to flash my rom It is called 'SmoothROM'
Thanks
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
I Don't think this is a good time to advertise your ROM.
Well, i've flashed my Blade with ColdFusionX ROM and everything seems to be great.
Then i decided to restart it and it stays on boot loop. It can be solved by entering on recovery and wiping the Dalvik Cache, but i want to know if there is another way to solve it? It's kinda annoying making it everytime i need to restart or shutdown.
Another question is for a good app to make USB Thetering, since the one on this ROM works but drains battery faster then USB provides.
Thanks and sorry about the bad english.
link to ROM's page: http://forum.xda-developers.com/showthread.php?t=1429539
Update:
Now things are worst then ever. I've updated ROM Manager to last version and then i can't enter on recover anymore and cellphone can't start.
Is there any way to flash the recovery from outside the phone?
Method 2.
http://www.modaco.com/topic/343587-guide-de-bricking-a-zte-blade/
Sent from my GT-I9300 using xda premium
Do you have Blade drivers for Windows 8, that drivers are for 7 and they aren't working.
Tryed method 2 but it didn't work, adb can't see my device connected. Now i'm trying method 3.
How can I know what TPT should i use?
Sorry for being so noob.
If you got your phone with 2.1 it is gen1, if 2.2 it is gen2.
Therefore, use gen2.
Sent from my GT-I9300 using xda premium
UrbanDrawer said:
If you got your phone with 2.1 it is gen1, if 2.2 it is gen2.
Therefore, use gen2.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It is with 4.0.4 gen2, but i don't know if i have to use chinese or european TPT.
It was manufactured in china, so I use the Chinese TPT, right? Seems obvious but i'm kinda scared.
Update: Problem Solved!
I turned it in recovery mode, and it got stuck as was happening before. So I left it a while and when i plugged him on the computer, adb recognized it and I could use the fastboot of method 2.
But i still got the problem with the Boot-looping on ColdFusionX that I said on first post. Is there a way to fix this? (It can be fixed wiping the Dalvik Cache every boot, but it is annoying)
Flash another rom.
Sent from my GT-I9300 using xda premium
vittal said:
Update: Problem Solved!
I turned it in recovery mode, and it got stuck as was happening before. So I left it a while and when i plugged him on the computer, adb recognized it and I could use the fastboot of method 2.
But i still got the problem with the Boot-looping on ColdFusionX that I said on first post. Is there a way to fix this? (It can be fixed wiping the Dalvik Cache every boot, but it is annoying)
Click to expand...
Click to collapse
This will keep on happening because the rom u are using has stopped development. Soon u will also loose Google play.
Do what urbandriver said. I recommended konsta T' cm9 (Google it).
Sent from my Blade using xda app-developers app
Hi
Hope someone can help. I was running MIUI 9 (Android 7) and unlocked the phone and then installed TWRP 3.2.1.0 when I rebooted the phone stuck on the MI screen with the unlocked indicator at the bottom. I went back into TWRP and found that the OS had disappeared. I then downloaded MIUI 9 GLOBAL zip and I could not transfer it to the phone (kept saying it was not connected) although I was able to access the internal SD on my Laptop. I then downloaded MiNote2 Global V8.2.3.0 MADMIDL and was able to send it to the phone and install it but during the install I got (Vendor not mounted, invalid argument). Can anyone advise how I can get my MI Note 2 up and running again?
TIA
Sent from my Nokia 7 plus using Tapatalk
Bump
Sent from my VS995 using Tapatalk
Sorry to respond to you this late , i'm not using XDA that often nowadays...
You may want to try restoring all back to normal with Mi Flash Tool...
Download the fastboot ROM and flash it. Be careful to not be selected the clean all+ lock option on the bottom left.
alexmanu1 said:
Sorry to respond to you this late , i'm not using XDA that often nowadays...
You may want to try restoring all back to normal with Mi Flash Tool...
Download the fastboot ROM and flash it. Be careful to not be selected the clean all+ lock option on the bottom left.
Click to expand...
Click to collapse
Thanks for the reply but I am having trouble trying to install using Mi Flash Tool. It keeps erroring telling me it cannot find flash-all.bat. Is there any way to overcome this?
Stransky said:
Thanks for the reply but I am having trouble trying to install using Mi Flash Tool. It keeps erroring telling me it cannot find flash-all.bat. Is there any way to overcome this?
Click to expand...
Click to collapse
The simple steps are:
To make sure the drivers are ok, install "Minimal fast oot and adb drivers"
Unpack the fastboot rom, open MiFlash and select the folder that has been unpacked (it normally has the same name as the zip)
Press Refresh in MiFlash if your device does not appear in the list (you need to have it plugged in and in fastboot mode at this point)
When your device is seen, and it will be if you have the drivers fine, click on Flash.
Hope this helps
The phone will reboot when the flash is done
Hi
Thanks for your reply. Did all as you have indicated but still get error (not found flash_all.bat) when I start the flash process in.MiFlash tool.
Sent from my Nokia 7 plus using Tapatalk
Stransky said:
Hi
Thanks for your reply. Did all as you have indicated but still get error (not found flash_all.bat) when I start the flash process in.MiFlash tool.
Sent from my Nokia 7 plus using Tapatalk
Click to expand...
Click to collapse
Seems like you are having a bad fastboot ROM...
Here is the link for 9.5.4.0 Global Stable.
alexmanu1 said:
Seems like you are having a bad fastboot ROM...
Here is the link for 9.5.4.0 Global Stable.
Click to expand...
Click to collapse
Thank you very much for taking the time to assist me. My MiNote 2 is now back up and running.
As you said the Roms that I had downloaded previously must have been corrupted or incomplete.
Again many thanks.
Stransky said:
Thank you very much for taking the time to assist me. My MiNote 2 is now back up and running.
As you said the Roms that I had downloaded previously must have been corrupted or incomplete.
Again many thanks.
Click to expand...
Click to collapse
No problem bro!
If you are not in the Mi Note 2 Telegram Group, here it is.
Everytime you need to restore your phone, you can do it like this, there is no problem.
Glad you restored your phone into a working state!