i had rooted my device, wiped, install cm7 & used for 3 weeks. one day, i booted the phone in recovery & choose to adjust cpu frequency from 1000 to 1200(it was stated that kernel 2.3 is needed). As i was running Android 2.3.7, i proceed to save the 1200 setting n boot my device, but it just boots with the red MT logo n green LED lights up, will reboots & not pass the motorola red batwing logo. Any ways i can get hold of my data?
Is it that i have screwed up my kernel? i did not update my kernel b4, i just rooted, install Droid 2 Recovery Bootstrap v1.0.0.3, n cm7. is it considered im still on original kernel?
Have you tried to re enter recovery and re adjust your speed to 1000? Or maybe you can try to increase vsel values.
right now, my device only shows motorola logo with random blue n green led light up n gone. can pls tell me how to re-enter recovery? i can enter into the original recovery mode by pressing x n power but it only gives me option to wipe device. unlike the custom recovery menu that has many other options.
wee2000 said:
right now, my device only shows motorola logo with random blue n green led light up n gone. can pls tell me how to re-enter recovery? i can enter into the original recovery mode by pressing x n power but it only gives me option to wipe device. unlike the custom recovery menu that has many other options.
Click to expand...
Click to collapse
When the blue and green light shows, press 'Up' Voume button (or is it 'Down') and it will enter Boot menu, go into Recovery and do a full wipe.
Thread moved to General, please ask all your questions here
Cheers!
When you reboot, the motorola logo appears. After 5 or 6 seconds the logo blinks and then the blue led lights up. Press the volume down key when the blue led lights up to enter boot menu. Press the volume keys to highlight and the power key to choose. Be quick when pressing the volume down key because my phone does not enter boot menu unless i press the volume down key during the blue light, pressing the key when the other colors light up dont work.
siakgayyem said:
When you reboot, the motorola logo appears. After 5 or 6 seconds the logo blinks and then the blue led lights up. Press the volume down key when the blue led lights up to enter boot menu. Press the volume keys to highlight and the power key to choose. Be quick when pressing the volume down key because my phone does not enter boot menu unless i press the volume down key during the blue light, pressing the key when the other colors light up dont work.
Click to expand...
Click to collapse
thx so much for the solution, im able to boot my phone normally, thx.
Related
Ive tried the volume down and volume and power but it wont work.... Any suggestions?
You are sure your phone is off and you:
Hold down the volume up and down with your left thumb and make sure there is a click feeling from both buttons and use your right hand to click on the power button?
I'm having the exact same problem. Have tried about 25 times to boot into recovery. Just does not work.
Pull the battery after every failed attempt took me about 2-3 tries. Before you do anything shut off phone pull battery then attempt to boot into recovery.
Yes, I'm doing that. The samsung screen comes up and if I release the buttons it does the normal boot up. If I keep holding the buttons the black screen with "vibrant" keeps coming on and off.
So far I discovered that it works perfectly if you hold the power button until after the Vibrant logo appears and then release the power button while still holding the both volume buttons. If you release the power button before the logo appears it will FAIL.
Only after the logo dissapears you can release the volume buttons.
In other words:
1-Press and hold both Volume buttons
2-Press and hold Power button
3-After Vibrant logo appears release Power button
4-Wait until Vibrant logo dissapears and then release Volume bottons
5-You should now be in recovery
Pito
Wow, I followed your directions step by step and still no luck! I wait till I the Vibrant logo to dissapear to release the volume buttons but it just boots up like normal. Thanks anyways! Is there another way of rooting my phone?
What I do as well is hold until the first logo dissapears and as soon as the second one appears release buttons. Then its in recovery.
Ive tried everything you all have said so far and I still cant get my phone into recovery mode. I was able to do it on my wife's vibrant but not on mine. Any suggestions?
Try getting quick boot from the market. It had an option to reboot into recovery. If your problem is just getting the button push right (i had real trouble with it at first) then this should work.
Sent from: Sammy Vibe Rooted
ROM: Stock
Recovery: Clockwork 2.5.0.4
If you are rooted then Clockwork Recovery Mod has the ability to boot into recovery mode. Or you can turn on usb debugging and use adb. Start>Run>cmd and use "adb reboot recovery"
Sent from my SGH-T959
I was running Liquid, booted into clockwork and installed MIUI. When I rebooted the phone it wouldn't go past the M logo. It shows up, then the phone restarts, and goes back to the M logo. Power up/down with the power button does nothing, and pressing power+x only brings me to the Android with an exclamation point. I tried to SBF, but when I plug my phone in, as the M logo comes up windows finds it, but then it continues to reboot and won't go past the M logo. I really just need to get to Clockwork and I can put a different ROM. Any suggestions?
If I remember correctly once you get to the android guy with the exclamation point you have to hit the search button and that will bring you recovery.
Either search button or volume up + volume down together, when you're on the exclamation point screen. You'll go into recovery mode and from there you can sbf.
with d2 g I can get to CWR
with phone off pressing camera button and plug in charger
Booting into Recovery
Power down the phone.
Slide out the keyboard.
Press and hold the X button on the physical keyboard.
Press the lock/power button.
Once you see a warning sign with an android robot appear, press the Search button on your physical keyboard if you're running 2.4.x firmware. For 4.5.x firmware, press Volume Up and Down buttons.
you could try
wipe cache and or wipe data
Bootloader
Boot the phone into SBF loader:
Power down the phone.
Slide the keyboard out.
Press and hold the up arrow (↑) key.
Press the lock/power button.
Once the SBF loader screen pops up, release the up arrow key.
these work for Droid2 g
Which MIUI are you flashing? I've flashed good and bad. I got good ones from rootzwiki and the most functional so far is 1.9.23
To get into Clockwork hit the down volume button when the blue light appears in the upper right-hand corner during the M logo. Select option 3, recovery, then latest recovery and you'll be in ClockworkMod.
As said above, wipe cache and data--I wipe davlik cache as well--then select zip to install.
Hi,
I recently flashed the cm72-120124.0859-NIGHTLY-Defy.zip, and now that i am trying to flash to cm72-120126.2206-NIGHTLY-Defy, but now when i try to boot to recovery, i get teh warning screen with the android and the exclamation point.
My phony works fine, but now I can't get into the custom recovery.
please help!
thnak you,
How did you entered to recovery??
Vol- on blue led i think, the custom is still there! Otherwise the phone doesnt boot
Motorola Defy CM7 RC 1.5 OC 1GHz
i usually just rebooted to recovery from the cm7 menu.
it's worked this way since i had cm7.1 stable, and other nightlies.
thanks, any advice is greatly appreciated.
Try boot into BootMenu and then go to custom/latest recovery? Did that work for you when you tried?
If the custom bootmenu is working properly, a blue LED on the phone should briefly light up each time the phone reboots (while the Motorola logo is being displayed). As soon as the blue LED lights up, press the volume down button. The custom BootMenu should display.
If that doesn't work, you could also try this. In CyanogenMod settings, go to Interface and make sure the "Power prompt" option is checked. Then, when you press and hold the power button and select "Reboot," you should see the option to reboot into "Bootmenu."
Thank you everyone,
i was able to get to the recovery menu by using the volume - at the blue light. still not sure why the reboot to recovery didn't work. it works now though.
This guide will solve the problem of notification led on all variants of moto e
This will remove any temporary files that may be
causing the problem , but will not delete your files or
settings.
1. With the phone powered off , press the VOL DOWN
KEY for 2 -3 seconds then POWER key then release .
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery
and VOL UP Key to select
Tip: If the device reboots , you may have waited to
long to make a selection , you will need to begin the
process again .
4. The device will display the Motorola logo and
then the Android in distress ( logo with Exclamation
mark )
5. Press and hold the VOL UP key for 10-15
seconds. While still holding the VOL UP key tap and
release the POWER key
Tip: You can try this step , holding the phone in
landscape. If you are stuck on step 6 , try a force
reboot by pressing the Power key and Vol Down key ,
and start the process again .
6. The device will display additional menu options
( Text will appear in BLUE )
7. Use the VOL DOWN Key to scroll to wipe cache
partition and the POWER Key to select this option
8. The device will then perform the partition wipe
9. The device will reboot and start the normal power
up sequence
Hit thanks if i helped you.......:thumbup:
Also enable notification led
Go to settings/display -->> click on (pulse notification light)
If not present then download notification led widget by Motorola from Google store
Hit thanks.....
Reserved
Sent from my XT1022 using xda app-developers app
hard91 said:
Also enable notification led
Go to settings/display -->> click on (pulse notification light)
If not present then download notification led widget by Motorola from Google store
Hit thanks.....
Click to expand...
Click to collapse
We have only white led!!!
M I right???
Sent from my XT1022 using xda premium
Yes but sometimes it stop working
Hello,
my OPT won't dispaly anything.
When you press the pwr button the display ignites for a short time in dark grey and the blue buttons glow.
Then nothing comes to the screen, no andoird boot logo etc. Just a black screen.
You can connect it to PC it will identified correctly as a A0001.
Fastboot commands in fastboot mode is possible but you see nohting on the screen. recovery mode is just similar wehn you hiut the button combination it vibrates the display ignite for a short time drak gray then nothing appers.
When in fastboot mode and test OEM unlock the device's bootloader ist locked.
All combination with pwr button hit and Vol +/- no response , nothing shows at the screen is stays black
The Display is changed by a new one so a Dispayy error is not possible.
Mega unbrick guide passed through have the Oxygen image on it but after pressing pwr button nothing appears on the screen
Any Help for me possible. ?