Related
Hello,
I have a big problem. I misplaced my MS2 with a customrom Droid 2 installed. after which the phone is stuck at Moto logo, I wanted to flash it with RSD Lite again. But unfortunately it has made all the worse. The screen then remained always black. By accident I found out that the master is always handy in the bootloader if I make the battery clean. the RSD Lite detects it again and then when I want to flash an SBF file he does it without problems. only then if he should make a reboot it ends up back in the bootloader. but i can´t see the bootloader. I know not what to do yet.
can anyone help me?
thank you
greeting
I didn't get quite right the situation but tell me which sbf are you using?
Is it the same android version that was before?
Have you tried pulling off the battery, waited 10 seconds, hold vol + and vol - (or X and arrow up, depending on android version) and powering up to enter the recovery and do a full data wipe? Does it starts normally after that?
Yes, it is the same as before sbf. I've been on it before GB and GB have also flashed.
at the first flash of sbf I'm also in the recovery menu and have a full wipe made but which has unfortunately not have shown anything.
I thought that maybe Customrom a different bootloader has been on it so I downloaded the 70.13 bootloader and flashed.
Since then I have the problem that it only comes into the bootloader, and here again but I have only a black screen.
greeting
sir my advice is redownload your SBF.. maybe it got corrupted. and make sure you choose the right SBF.
devilbatghost said:
sir my advice is redownload your SBF.. maybe it got corrupted. and make sure you choose the right SBF.
Click to expand...
Click to collapse
hi Devilbatghost,
i redownload the SBF and its the right SBF.
i send it to Moto to fix it.
thanks for all.
greet
Original Milestone 2 SBF files
Can someone please tell me where I can get these original SBF files for my M2? I want to go back to the stock ROM for my phone.
Here:
http://and-developers.com/sbf:milestone2
the links for the sbf files are dead.
yes
those links are dead.
does anyone know of an alternate location for the sbf files?
xsghost said:
those links are dead.
does anyone know of an alternate location for the sbf files?
Click to expand...
Click to collapse
Check here for the name of the file you want to download
http://and-developers.com/sbf:milestone2
And download from here the ROM you want
http://sbf.system-ready.org/umts_milestone2/
I have trouble getting the sbf file too, all the links given are dead and i cant reach it from anywhere else, would anyone be kind enough to share the UK 2.2 sbf file?
http://sbf.droid-developers.org/umts_milestone2/list.php
Sent from my A953 using XDA
hello every one ..
actually i have a big problem in my defy plus ....that is i am not able to root it from the day i swaped this
Blur_Version.45.0.2310.MB526.AsiaRetail.en.03 (2012/01/12)
reffered from this
http://forum.xda-developers.com/showthread.php?t=1495099
i ll now request u guys to please listen carefully and help me out
so the starting of the destruction of my defy plus was when i saw this on youtube
http://www.youtube.com/watch?v=3v9O...Kk&annotation_id=annotation_424204&feature=iv
i saw the video and like everyone else tried to upgrade my phone to ics... (this is the point where i would like to kill myself for doing that)
but unfortunately i encountered an error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
at that point i thought i was done and didnt knew much about the rdslite and bootloader and all that stuff...i was gone crazy and tried to search a solution on google and found out that it was the sbf that was damaged so in a hurry i read this
http://forum.xda-developers.com/showthread.php?t=1216982
and found an SBF and switched it using RSDlite but to my surprise i flashed a chinese sbf from here
http://sbf.droid-developers.org/umts_jordanplus/list.php
...not knowing much about SBF i tried a lot to find an Asia pacific SBF for my defy and i (not knowing much about it ) flashed
Blur_Version.45.0.2310.MB526.AsiaRetail.en.03 (2012/01/12)
when the process was complete i was so happy that i fixed my defy but i actually made it worse
now i was not able to root not able to install bootmenu or any thing else this all has happened just last weekend
first i accepted it and thought its better this way
but after some time i realized my mistake and now i posted it on this sit
plzz help me find a suitable SBF because previosly i tried some
like this
http://forum.xda-developers.com/showthread.php?t=1375701
and the result was that my phone wasn't switching on it sowed a white led light
it was the same result in the second one so i switched back to
Blur_Version.45.0.2310.MB526.AsiaRetail.en.03
Please guys tell me which sbf should i use or what shoud i do ??? .....if my dad figures out about it ill definitely get scolded very bad...... please help i also know that there would be thousands of other users out there who might get help from this question ,,,
SO PLEASE HELPP ME
All the best friend
http://forum.xda-developers.com/forumdisplay.php?f=855 THIS LINK FOR DOWNLOAD THIS sBF.
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage ,u flashed this sbf
Then root with SuperOneClickv2.3.3-Short Fuse.
STEP for ROOT MOTOROLA DEFY PLUS.
1.GO TO SETTINGS
2. In Application go to development
3.Enable the USB debugging
4.Install superuser ,Then Run SuperOneClickv2.3.3-Short Fuse Run AS administration .then click root process is going ,its asked if u want to test the root just say no ,then reboot the the phone then
5.Install 2ndInit Recovery Installer v2.3
http://forum.xda-developers.com/sho...snugly.euroskank.com/skankwich/?id=jordanplus)
ela1103 said:
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage ,u flashed this sbf
Then root with SuperOneClickv2.3.3-Short Fuse.
Click to expand...
Click to collapse
Really??? Root a BL7 sbf with SuperOneClick? I'd pay to see this!
@trusharbhan
Here is a thread about rooting a BL7 ROM
plzz help again ....
ela1103 said:
http://forum.xda-developers.com/forumdisplay.php?f=855 THIS LINK FOR DOWNLOAD THIS sBF.
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage ,u flashed this sbf
Then root with SuperOneClickv2.3.3-Short Fuse.
STEP for ROOT MOTOROLA DEFY PLUS.
1.GO TO SETTINGS
2. In Application go to development
3.Enable the USB debugging
4.Install superuser ,Then Run SuperOneClickv2.3.3-Short Fuse Run AS administration .then click root process is going ,its asked if u want to test the root just say no ,then reboot the the phone then
5.Install 2ndInit Recovery Installer v2.3
http://forum.xda-developers.com/sho...snugly.euroskank.com/skankwich/?id=jordanplus)
Click to expand...
Click to collapse
i did swaped the rom and now i got blank screen .... my phone is not opening what to do??? its stuck it would not open even after the process said PASS ..
.i when connected it with usb it showed a white light and also my phone i heating up incredibly .......plzzz tell if the process is PASS then why wont it open??? how to get it back to work again.....
Auris 1.6 vvt-i said:
Really??? Root a BL7 sbf with SuperOneClick? I'd pay to see this!
@trusharbhan
Here is a thread about rooting a BL7 ROM
Click to expand...
Click to collapse
hey man i read your thread and i think itll be helpfull but only when i get the right sbf please read my other reply to @ ela1103 and help me if u know how to correct it
OK, calm down and describe EXACTLY what have you downloaded and how have you flashed it.
Yes Iam using this sbf in my motorola defy plus
Auris 1.6 vvt-i said:
Really??? Root a BL7 sbf with SuperOneClick? I'd pay to see this!
@trusharbhan
Here is a thread about rooting a BL7 ROM
Click to expand...
Click to collapse
Yes Iam using this sbf in my motorola defy plus .i root with SuperOneClickv2.3.3-Short Fuse.now iam using cm9 kangs by FuZZ_ Ok
this is what i did
Auris 1.6 vvt-i said:
OK, calm down and describe EXACTLY what have you downloaded and how have you flashed it.
Click to expand...
Click to collapse
actually i downloaded 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage from here
http://forum.xda-developers.com/showthread.php?t=1386942
then i switched off my defy and did as it says here
http://forum.xda-developers.com/showthread.php?t=1618718
(just that i used the sbf mentioned above not from the link given in this thread)
so when the rsdlite finished it said rebooting but it didnt reboot (just power went off) and then rsdlite said PASS
after that i thought that the process is compleate and removed device from usb but it didnt open(blank screen) and
so i tried to open it connecting usb and it didnt open but showed connected in rsdlite and my device showed white led light
since it was heating up i removed the usb and battery from my device and started posting in xda
and that should be all that i did in past 1hour....
it work for you .
tusharbhan said:
hey man i read your thread and i think itll be helpfull but only when i get the right sbf please read my other reply to @ ela1103 and help me if u know how to correct it
Click to expand...
Click to collapse
Now YOU Go to the Motorola recovery mode ,First press the power button at the same time press volume down button .now you enter motorola recovery mode,fist wipe data factory rest and wipe cache partition.
Then enter into bootloader mode.then flash this 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage. then phone boot up. use this method
http://sbf.droid-developers.org/umts_jordanplus/list.php THIS LINK FOR DOWNLOAD THIS sBF.
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf.gz.use this sbf . ITS is in 6 the one sbf .iam using this sbf only in my defy plus , its must work for u r defy plus
..
ela1103 said:
Now YOU Go to the Motorola recovery mode ,First press the power button at the same time press volume down button .now you enter motorola recovery mode,fist wipe data factory rest and wipe cache partition.
Then enter into bootloader mode.then flash this 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage. then phone boot up. use this method
http://forum.xda-developers.com/forumdisplay.php?f=855 THIS LINK FOR DOWNLOAD THIS sBF.
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage.use this sbf . its must work for u r defy plus
Click to expand...
Click to collapse
ok so for that i think i have to flash the previous one back
because i did that and now it worked ill try ur method
same old result...
ela1103 said:
Now YOU Go to the Motorola recovery mode ,First press the power button at the same time press volume down button .now you enter motorola recovery mode,fist wipe data factory rest and wipe cache partition.
Then enter into bootloader mode.then flash this 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage. then phone boot up. use this method
http://sbf.droid-developers.org/umts_jordanplus/list.php THIS LINK FOR DOWNLOAD THIS sBF.
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf.gz.use this sbf . ITS is in 6 the one sbf .iam using this sbf only in my defy plus , its must work for u r defy plus
Click to expand...
Click to collapse
i did what u said and again ended up being with black screen ... the phone dosent powers on and the white led light is seen when plugged to usb.......
what to do help...
Use this rsd lite 4.9
Use this rsd lite 4.9
use this sbf
Asia Retail
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS0 3C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf. gz
DOWNLOAD(http://forum.xda-developers.com/showthread.php?t=1421526)
where will you buy this Motorola defy plus .r u from India
i was doing that only...
ela1103 said:
Use this rsd lite 4.9
use this sbf
Asia Retail
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS0 3C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf. gz
DOWNLOAD(http://forum.xda-developers.com/showthread.php?t=1421526)
Click to expand...
Click to collapse
i am using rsdlite 4.9 and i used
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS0 3C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf. gz
but still the same .....black screen
can we talk in gtalk or chat
well yea
ela1103 said:
can we talk in gtalk or chat
Click to expand...
Click to collapse
sure thing mate ill give u my id its [email protected]
your defy is back
and, what was the solution? I am having the same problem.
@ tushar - is your defy working ?
same problem
yeah.. I got the same problem too, wait for the solution..
before wanting to help if u want to know the whole situation what happened then u can see it here
http://forum.xda-developers.com/showthread.php?t=1713465
now my problem is that i want an SBF for my motorola defy plus MB256 which is stable, can be rooted , can be upgraded to ics CM9 and with no bugs........since i am only able to flash the SBF of these type
DEFYPLUS_U3_4.5.1-134_DFP-231
any other sbf i try is failed
(rsdlite says pass but black screen shows up whith white led)
:crying:
currently i am using DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN_USADEFYEMARAB1B8RTGB005.0R_PDS03C_USAJRDNGIBRRTGB_P023_A025_M002_Service1FF
also DEFYPLUS_U3_4.5.1-134_DFP-231 types are all unrootable and hence i am helpless
Firstly: there is no such thing as CM9 with no bugs (but they are getting better and better). Second: use search option before posting. You're not special. This question has been asked 1000 times.
The black screen when flashing is because you're trying to flash an sbf with a lower codegroup version. You're on level 7. There is no downgrade to any sbf woth a lower codegroup version. Read about it here (search the first post for "downgrade")
You can't use the rooting toolkits because you have bootloader7 (e-fuse "blown" to level 7. The old rooting exploits don't work any more) How to root your build: DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted
Please, guys: I'm not on bl7 myself, so correct me if I'm wrong on anything.
fiskenigaten said:
Firstly: there is no such thing as CM9 with no bugs (but they are getting better and better). Second: use search option before posting. You're not special. This question has been asked 1000 times.
The black screen when flashing is because you're trying to flash an sbf with a lower codegroup version. You're on level 7. There is no downgrade to any sbf woth a lower codegroup version. Read about it here (search the first post for "downgrade")
You can't use the rooting toolkits because you have bootloader7 (e-fuse "blown" to level 7. The old rooting exploits don't work any more) How to root your build: DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted
Please, guys: I'm not on bl7 myself, so correct me if I'm wrong on anything.
Click to expand...
Click to collapse
well i read that guide
thanks for the info man but u see if i have defy plus and i am at cg7 with bootloader version 7 and it is unrootable then my question to u would be
HOW WAS I ABLE TO ROOT MY PHONE WHEN I BUYED IT
i mean before doing the cm9 experiment my phone was in android 2.3.6 and i was able to root/unroot it using DooMLoRD's Easy Rooting Toolkit
from here http://opusbonum.blogspot.in/
and it was all going fine untill i made a mistake in upgrading to cm9(for full data visit http://forum.xda-developers.com/showthread.php?t=1713465)
plus i am asking for solutions no links of threads
(its because in last 2 weeks i am searching xda for solutions and couldn't come up with anything)
http://forum.xda-developers.com/showthread.php?t=1542956
this link i tried but it ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
so plzz now tell me what to do
i want my defy plus back like before :crying:
or if there is way to change BL version and also i have a stupid question
HOW DO WE SEE OUR BL VERSION?
tusharbhan said:
well i read that guide
thanks for the info man but u see if i have defy plus and i am at cg7 with bootloader version 7 and it is unrootable then my question to u would be
HOW WAS I ABLE TO ROOT MY PHONE WHEN I BUYED IT
i mean before doing the cm9 experiment my phone was in android 2.3.6 and i was able to root/unroot it using DooMLoRD's Easy Rooting Toolkit
from here http://opusbonum.blogspot.in/
and it was all going fine untill i made a mistake in upgrading to cm9(for full data visit http://forum.xda-developers.com/showthread.php?t=1713465)
plus i am asking for solutions no links of threads
(its because in last 2 weeks i am searching xda for solutions and couldn't come up with anything)
http://forum.xda-developers.com/showthread.php?t=1542956
this link i tried but it ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
so plzz now tell me what to do
i want my defy plus back like before :crying:
or if there is way to change BL version and also i have a stupid question
HOW DO WE SEE OUR BL VERSION?
Click to expand...
Click to collapse
Did you just read the threads in the link. I just can't get the part
plus i am asking for solutions no links of threads
Click to expand...
Click to collapse
. Don't you see Link is the solution.Or do you somehow assume someone would copy & paste a whole thread here.
I'm again quoting the solution. Just click the thread and read. Its all described there.
PS: Your BL version is decided with the ROM build. CG7 & BL7 are the same thing, the moral of the story is You are on BL7 (Bootloader 7)
fiskenigaten said:
Firstly: there is no such thing as CM9 with no
You can't use the rooting toolkits because you have bootloader7 (e-fuse "blown" to level 7. The old rooting exploits don't work any more) How to root your build: DFP-188, DFP-231, DFP-2311 BL7 Finally Rooted
Click to expand...
Click to collapse
neo.ank said:
Did you just read the threads in the link. I just can't get the part . Don't you see Link is the solution.Or do you somehow assume someone would copy & paste a whole thread here.
I'm again quoting the solution. Just click the thread and read. Its all described there.
PS: Your BL version is decided with the ROM build. CG7 & BL7 are the same thing, the moral of the story is You are on BL7 (Bootloader 7)
Click to expand...
Click to collapse
hey there i know that i am at Bootloader 7 and i got that its currently unrootable so at this link (http://forum.xda-developers.com/showthread.php?t=1542956) they are trying to find a solution
but u see the method didnt worked for me
i ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
tried 2 times still the same.....
and i would really appreciate if u guys first read the whole story of mine
here
http://forum.xda-developers.com/showthread.php?t=1713465
then u might be able to understand my situation
tusharbhan said:
hey there i know that i am at Bootloader 7 and i got that its currently unrootable so at this link (http://forum.xda-developers.com/showthread.php?t=1542956) they are trying to find a solution
but u see the method didnt worked for me
i ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
tried 2 times still the same.....
and i would really appreciate if u guys first read the whole story of mine
here
http://forum.xda-developers.com/showthread.php?t=1713465
then u might be able to understand my situation
Click to expand...
Click to collapse
u got this error in the first step flash or in the step 2 flash?
tusharbhan said:
hey there i know that i am at Bootloader 7 and i got that its currently unrootable so at this link (http://forum.xda-developers.com/showthread.php?t=1542956) they are trying to find a solution
but u see the method didnt worked for me
i ended up with bootloader error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
tried 2 times still the same.....
and i would really appreciate if u guys first read the whole story of mine
here
http://forum.xda-developers.com/showthread.php?t=1713465
then u might be able to understand my situation
Click to expand...
Click to collapse
Redownload the files. make sure you use both files from the same source(either both CN or both CEE). do a complete wipe from recovery. The error you are getting occurs when you flash an SBF with lower version than you are on but since CG7 is highest till date, this means you can flash those only with a CG7 SBF. I read what you did.
PS: BL7 is rootable by flashing a rooted SBF.Thats what the other thread is about.
neo.ank said:
Redownload the files. make sure you use both files from the same source(either both CN or both CEE). do a complete wipe from recovery. The error you are getting occurs when you flash an SBF with lower version than you are on but since CG7 is highest till date, this means you can flash those only with a CG7 SBF. I read what you did.
PS: BL7 is rootable by flashing a rooted SBF.Thats what the other thread is about.
Click to expand...
Click to collapse
yea now i get it i got the error on this step
4. Flash rooted SBF 4.5.1-134 DFP-231 CN Rooted SBF Part.1, 4.5.1-134 DFP-231 CN Rooted SBF Part.2 or 4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SB
it might be because i skipped this step
2. Flash 4.5.1-134 DFP-231 CN or 4.5.1-134 DFP-231 Retail.en.EU CEE (It doesn't matter what version of this two You flash but it must be the same with version from point 4).
because i thought that i already had DEFYPLUS_U3_4.5.1-134_DFP-231_BLUR_SIGN
so it might work but it didnt this time ill try the complete process
thank u guys
:laugh:
okaay this time i tried each and everything as same as given here
http://forum.xda-developers.com/showthread.php?t=1542956
but when flashing rooted sbf rsd lite was restarting my phone and the process ended in 16% and i got an error in my phone
Bootloader
09.10
Err:A5,69,35,00,27
Battery Ok
OK to Program
Connect USB
Data Cable
what to do now
Dear tusharbhan,
it seems your datacable is too long (it will loss signals if the cable is disfunctional), try it with a very short datacable and use the usb-port which directly connected with the motherboard of your computer.
RATTAR said:
Dear tusharbhan,
it seems your datacable is too long (it will loss signals if the cable is disfunctional), try it with a very short datacable and use the usb-port which directly connected with the motherboard of your computer.
Click to expand...
Click to collapse
I don't think the length is the problem (I use an extended cable which is double the length of original)but yes changing the cable or port might do it.
tusharbhan said:
okaay this time i tried each and everything as same as given here
http://forum.xda-developers.com/showthread.php?t=1542956
but when flashing rooted sbf rsd lite was restarting my phone and the process ended in 16% and i got an error in my phone
Bootloader
09.10
Err:A5,69,35,00,27
Battery Ok
OK to Program
Connect USB
Data Cable
what to do now
Click to expand...
Click to collapse
The files might be corrupted, Re-download,also try changing your port/cable.
Also check you RSDLite version too.
it worked
http://forum.xda-developers.com/show....php?t=1542956
finally i got it worked
the thing was i was doing a step wrong
i flashed
4.5.1-134 DFP-231 CN
and
rooted version 4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SBF
that is why i got bootloader error
now i flashed 4.5.1-134 DFP-231 Retail.en.EU CEE
and rooted version 4.5.1-134 DFP-231 Retail.en.EU CEE Rooted SBF
and it worked
yay i am so happy
thanks to all
fiskenigaten , neo.ank and imam88
thank u very much guys:good: :laugh:
now to upgrade
thank u guys to help me
now i am finally rooted
and i will request 1 last thing
i have few questions and would like the answers....
1) i want to upgrade to CM9 how do i do it ? (please explain the method because last time i failed u can see here http://forum.xda-developers.com/showthread.php?t=1713465)
2) if not CM9 then can i upgrade to CM7
3) u see i am a noob i dont know much about roms and how to flash them so please explain to me how to flash custom rom etc
thank u again guys :good:
tusharbhan said:
thank u guys to help me
now i am finally rooted
and i will request 1 last thing
i have few questions and would like the answers....
1) i want to upgrade to CM9 how do i do it ? (please explain the method because last time i failed u can see here http://forum.xda-developers.com/showthread.php?t=1713465)
2) if not CM9 then can i upgrade to CM7
3) u see i am a noob i dont know much about roms and how to flash them so please explain to me how to flash custom rom etc
thank u again guys :good:
Click to expand...
Click to collapse
Good you got it rooted (I already told you to keep both files same And its mentioned explicitly at the Root thread)
You need Custom recovery to flash a custom ROM.
Install 2ndInit first
And just be careful before you begin with anything.Never Hurry. Reading carefully what's written won't hurt you. But doing idiotic mistakes just coz you weren't careful will.
Update cm9 for defy plus
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
confused
ela1103 said:
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
Click to expand...
Click to collapse
thank u guys u see i want CM9 but before that i want to ask 2 questions more
will it be okay i mean will my defy plus run better or slower
can i downgrade to 2.3.6 if i dont like or something (is it one way decision):silly:
please suggest me
and yea hey @ela1103 thank u but can i use this site
http://forum.xda-developers.com/showthread.php?t=1432100
but can u explain what does it mean buy these steps
:FLash
6:Flash CM9 Kernel [Note: Defy Plus users DO NOT FLASH KERNEL ZIP!]
7:Flash Gapps zip(On first page of ICS DeV thread)
8:Flash Battery Fix(Only for Red Lens) http://dl.dropbox.com/u/29851821/ICS...tery Fix.zip
9:Clear Cache and Dalvik Cache
from here i didnt understood
do i have to flash kernal or not
whats up with battery fix
??
[ICS][CM9]Defy/Defy+ kangs by FuZZ
Defy Plus users DO NOT FLASH KERNEL ZIP
Here is the link for cm9 defy plus
http://forum.xda-developers.com/showthread.php?t=1673116
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
ela1103 said:
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
Click to expand...
Click to collapse
ela1103 said:
Defy Plus users DO NOT FLASH KERNEL ZIP
Here is the link for cm9 defy plus
http://forum.xda-developers.com/showthread.php?t=1673116
Install 2ndInit Recovery Installer v2.3
http://fitsnugly.euroskank.com/skankwich/?id=jordanplus
http://goo.im/gapps/gapps-ics-20120429-signed.zip
turn of the phone switch on the phone when red led blink in defy that time press volume down button
then select recovery mode and select custom recovery mode ok
1.wipe data factory rest
2.wipe cache partition
3.install zip from sdcard
4.choose the cm9-20120620.0731-Defy+
5.install this zip
6.chose gapps-ics-20120429-signed.zip
Then reboot u r defy plus it will take 3mins boot
Click to expand...
Click to collapse
You sure everything you posted is correct.!! Better detail things and maintain integrity of your posts. Helping someone is a good thing but a small mistake could end up in disaster.
@OP Here is the link for supported ROMs(see the first post). You can chose any under Gingerbread.
Here is [APP] 2ndInit Read installation instructions carefully. At this step you can screw your phone.
What a Custom recovery and 2ndInit is, you'll find it here.
PS: Since the problem(rooting) you started this thread for is solved, its better to post your relevant questions in the respective threads and discontinue this one.This makes thing confusing and hectic for users.
thanks
neo.ank said:
You sure everything you posted is correct.!! Better detail things and maintain integrity of your posts. Helping someone is a good thing but a small mistake could end up in disaster.
@OP Here is the link for supported ROMs(see the first post). You can chose any under Gingerbread.
Here is [APP] 2ndInit Read installation instructions carefully. At this step you can screw your phone.
What a Custom recovery and 2ndInit is, you'll find it here.
PS: Since the problem(rooting) you started this thread for is solved, its better to post your relevant questions in the respective threads and discontinue this one.This makes thing confusing and hectic for users.
Click to expand...
Click to collapse
ill see to it later currently i have no plans on upgrading now because of a sudden delay so ill keep u guys posted when i try that:fingers-crossed:
i really appreciate your efforts and your help thank you very much
and yea about starting new thread..... well i am sorry i was kind of freaked out
and was in a hurry so ... u ll understand i wont repeat my again
:highfive:thank you very much........ i had been struck with same problem for more than week......
finally able to root my defy plus.......but it being repeatedly rebooted after every 30 secs is there any solution for that?????????????.
thanks in advance........:good::good::good:
Hello Everyone,
I recently rooted my defy plus having BL7 using the method provided in this forum - http://forum.xda-developers.com/showthread.php?p=24743292#post24743292. I installed the CM9-NIGHTLY-120626-Defy+ ROM in my device, everything is working fine (I have attached the screenshot of my phone details). Now, I am having problem with my accessories, since the phone is in warranty I have to give my phone to service center. However, I am not able to find the proper method for unrooting the phone again and installing the official firmware which is provided by Motorola in India.
Please guys help me, warranty is getting expired on 10th August. So, I need to replace the defective accessories.
There is no known method to unroot BL7 firmware. You need to flash the SBF again. Check out the development section for detailed information on flashing SBF files and links.
Thank You for replying. I have searched a lot, but so far I was able to find only this -
http://sbf.droid-developers.org/umts_jordanplus/list.php
http://forum.xda-developers.com/showthread.php?t=1093352
I don't know what to use.
Well, if you were having BL7, the firmware should have been 4.5.1-134-DFP-231. Do you remember the exact firmware version? For my Defy+ it was 4.5.1-134_DFP-1321 AsiaRetail http://forum.xda-developers.com/showthread.php?t=1386942 which was BL6.
I would suggest not to go ahead flashing SBF to just avail warranty of accessories as flashing SBF is quite risky and can result in bricking of phone.
yes, it was 4.5.1-134-DFP-231.
There would have been something beyond the version number too. Like for me it was AsiaRetail.en
[A]
I did come across a SBF that is rootable.
This worked like a charm for my Defy+ Red Lens
http://forum.xda-developers.com/showthread.php?t=1542956
Let me know how it goes.
Andy
addictedboy said:
Hello Everyone,
I recently rooted my defy plus having BL7 using the method provided in this forum - http://forum.xda-developers.com/showthread.php?p=24743292#post24743292. I installed the CM9-NIGHTLY-120626-Defy+ ROM in my device, everything is working fine (I have attached the screenshot of my phone details). Now, I am having problem with my accessories, since the phone is in warranty I have to give my phone to service center. However, I am not able to find the proper method for unrooting the phone again and installing the official firmware which is provided by Motorola in India.
Please guys help me, warranty is getting expired on 10th August. So, I need to replace the defective accessories.
Click to expand...
Click to collapse
I don't remember it exactly was it was, but is their any problem in installing asia retail version. I have doubt, either it was [email protected](something like that) or asia retail.
@anandcs - thank you for providing the link. Is it OK to give the mobile phone to service center with that ROM installed?
The problem is you need to flash the exact ROM which was preloaded with the phone. In the SBF links above, there are no Asia Retail versions available for firmware 4.5.1-134-DFP-231.
So, how can I get the asia retail version for the defy plus?
Can I use the asia retail sbf file from this post? Is this sbf official stock rom provided by Motorola?
http://forum.xda-developers.com/showthread.php?t=1495099
Yes that should be good I guess.
I successfully flashed my phone using the sbf provided in that forum. Now the phone look like as it was when I purchased it first.
OK this is the tricky part. There are two firmwares (SBF's) in that post. If you plan to give the phone to a service center then flash only the first one. The other SBF is a root able one.
From my personal experience your phone should be as good as new with the first SBF flash.
Let me know how it goes.
Sent from my MB526 using Tapatalk 2
Saw your post later Adictedboy. Glad your problem is fixed
Sent from my MB526 using Tapatalk 2
Unrooting
addictedboy said:
Can I use the asia retail sbf file from this post? Is this sbf official stock rom provided by Motorola?
http://forum.xda-developers.com/showthread.php?t=1495099
Click to expand...
Click to collapse
Hello
Did you flash the sbf file whose link is given by you in your above post to take your phone back to stock? Did it work successfully and were you able to claim warranty on your device?
The reason I am asking is , I tried to root my phone yesterday and it looks like something has gone wrong in the rooting. While the phone is not bricked it is not able to connect to the network on a 2g selection in the "Wireless&Netowrk --> Mobile Network-->Select Network" selection. It only works if the selection is changed to Automatic. The details of my device are:
Build # 4.5.1-134_DFP-231 & Android ver 2.3.6
Before rooting I had checked the sbf file name in my device and it was the same as in this file name.
Now if you can confirm it worked successfully for you I will use it to unroot my phone.If you can please list the exact process you followed while going back to stock it will be very helpful for everyone from India who gets into trouble with this device and this sbf and build.
Thanks
aCs_ND said:
Hello
Did you flash the sbf file whose link is given by you in your above post to take your phone back to stock? Did it work successfully and were you able to claim warranty on your device?
The reason I am asking is , I tried to root my phone yesterday and it looks like something has gone wrong in the rooting. While the phone is not bricked it is not able to connect to the network on a 2g selection in the "Wireless&Netowrk --> Mobile Network-->Select Network" selection. It only works if the selection is changed to Automatic. The details of my device are:
Build # 4.5.1-134_DFP-231 & Android ver 2.3.6
Before rooting I had checked the sbf file name in my device and it was the same as in this file name.
Now if you can confirm it worked successfully for you I will use it to unroot my phone.If you can please list the exact process you followed while going back to stock it will be very helpful for everyone from India who gets into trouble with this device and this sbf and build.
Thanks
Click to expand...
Click to collapse
Yeah, it was successful, I faced no problem while doing that. However, I didn't went to the service center since it is not located in my city and the problem was not too big, it was just a headphone issue.
Unrooting
addictedboy said:
Yeah, it was successful, I faced no problem while doing that. However, I didn't went to the service center since it is not located in my city and the problem was not too big, it was just a headphone issue.
Click to expand...
Click to collapse
Thanks for responding. This is very good news, for me atleast.
So the sbf file is the correct one. That is a very big relief.
Can you please correct the procedure to be followed from the list below:
Step1=Boot into factory data reset ---> Wipe Data & Wipe Cache -- Is this required? If yes does this need to be done once or twice?
Step2=Open RSDLite
Step3=Boot in to Bootloader
Step4=Connect Phone to PC via USB
Step 5= Flash SBF through RSDLite
ps: Does the phone need to have USB debugging activated in Applications-->Development-->USB Debugging?
If any of the steps is incorrect or not required just correct the procedure for me.
Thanks.
aCs_ND said:
Thanks for responding. This is very good news, for me atleast.
So the sbf file is the correct one. That is a very big relief.
Can you please correct the procedure to be followed from the list below:
Step1=Boot into factory data reset ---> Wipe Data & Wipe Cache -- Is this required? If yes does this need to be done once or twice?
Step2=Open RSDLite
Step3=Boot in to Bootloader
Step4=Connect Phone to PC via USB
Step 5= Flash SBF through RSDLite
ps: Does the phone need to have USB debugging activated in Applications-->Development-->USB Debugging?
If any of the steps is incorrect or not required just correct the procedure for me.
Thanks.
Click to expand...
Click to collapse
Yeah you can go ahead, I also did the same. First I wiped data and cache and then I wiped cache only, so as to ensure that everything has been wiped. I do not have much idea about USB debugging if it is necessary to enable it or not, since after wiping the data and cache, phone is automatically put in to the factory reset mode and I don't think USB debugging is turned ON by default. However, in my case before wiping the cache and putting it into the recovery mode USB debugging was enabled.
Hi,today I have flashed original Motorola .sbf ,I downloaded it from here. It is 3.4.2_179-002, Retail Central Europe version. Now,after flashing it with RSD Lite the phone does not boot. There is no even Motorola logo at the start,nothing,its dead. How can I start the phone with this original .sbf? I want to have original froyo on the phone,and I know how to get back to CM10 but im not interesting in that now.
Thanks.
markos807 said:
Hi,today I have flashed original Motorola .sbf ,I downloaded it . . .... I know how to get back to CM10 but im not interesting in that now.
Thanks.
Click to expand...
Click to collapse
markos807, did the SBF flashing process complete successfully and did u get the message "Please manually reboot phone" in RDSLite window?
Did u verify the MD5sum of the downloaded SBF against the MD5sum given in the download page to check if the downloaded SBF file is not corrupted?
Are u still able to go to the Bootloader by pressing VOL UP+POWER button when the phone is switched off?
Only if u provide the above information, I can suggest what can be done next.
1.I dont remember what was the message,but I think it wasnt "Please manually reboot phone",but it was done,some other message saying its done
2.How to do that?
3.I cannot go into bootloader and when I connect a phone via usb to the PC the RSD Lite recognizes it so I can flash some other verified sbf.
Thanks for trying
markos807 said:
1.I dont remember what was the message,but I think it wasnt "Please manually reboot phone",but it was done,some other message saying its done
2.How to do that?
3.I cannot go into bootloader and when I connect a phone via usb to the PC the RSD Lite recognizes it so I can flash some other verified sbf.
Thanks for trying
Click to expand...
Click to collapse
Might I suggest, pull your Defy battery, replace it, do not attempt to get into bootloader, Leave it off. Just plug it in with usb after booting up RSD lite and see if connects on it's own. Sounds like a bad flash. I've connected that way numerous times.
markos807 said:
1.I dont remember what was the message,but I think it wasnt "Please manually reboot phone",but it was done,some other message saying its done
2.How to do that?
3.I cannot go into bootloader and when I connect a phone via usb to the PC the RSD Lite recognizes it so I can flash some other verified sbf.
Thanks for trying
Click to expand...
Click to collapse
1. Even I dont remember the exact message But I remember that it asks us to reboot the phone manually.
2. If the SBF which u are using is corrupted while downloading, it may lead to bad flash. U can google and download and use any of the md5sum checking tools. I use winmd5 application(I'm using Windows in my laptop), which is easy to use and it has UI unlike some other md5sum tools which have to be run through command line.
3. If RSD Lite recognizes ur phone, then try flashing the SBF once again. But ensure that the SBF is not corrupted as mentioned in point 2. If ur SBF is corrupted, try downloading it again. There are chances for a file to get corrupted while downloading. That is the reason why md5sum is mentioned in the download page to verify the file after download.
Winmd5 app says "Matched!". That means it is good?
Yes, if the MD5sum matches it means that the SBF file is not corrupted. U try flashing the same SBF again and see if it works.
@ markos807: Were u able to flash SBF successfully? I would like to know if ur defy is working fine now
Gingerbread (BL7) back to Froyo?
Did you already flash a Defy+ ROM with Gingerbread?
From a BL7 ROM there is no way back to Froyo. BL7 doesn't support that.
When I wanted to go back to froyo, I was flashing this sbf: JDGC_U6_2.13.0 China Unicom Thread/Download !!!BL6 kernel !!!
And that broke my flashlight! And because of that I want to go back to other official froyo sbf to see will the flashlight work. Do you know any other fix for the flashlight? Anything please?
Also, I am flashing same sbf second time now, will post the results.
Edit: Cannot boot the phone with any .sbf downloaded from here. The only .sbf that I can flash and boot the phone is JDGC_U6_2.13.0 China Unicom and that one broke my flashlight.
markos807 said:
When I wanted to go back to froyo, I was flashing this sbf: JDGC_U6_2.13.0 China Unicom Thread/Download !!!BL6 kernel !!!
And that broke my flashlight! And because of that I want to go back to other official froyo sbf to see will the flashlight work. Do you know any other fix for the flashlight? Anything please?
Also, I am flashing same sbf second time now, will post the results.
Edit: Cannot boot the phone with any .sbf downloaded from here. The only .sbf that I can flash and boot the phone is JDGC_U6_2.13.0 China Unicom and that one broke my flashlight.
Click to expand...
Click to collapse
Mate, as you flashed BL6 sbf then you are stuck with BL6 and no way back to froyo other than chinese one.
Your flashlight could be burnt out - in such a case only moto service can help
What do you mean you cannot boot with any sbf from walter79 thread? Have you tried all of them? (You shouldn't). Or only froyo ones?
If you tried only froyos, then you can flash gingerbread BL6 to check your flashlight
And have you tried wiping data and cache from stock recovery? Is it accessible with power + volume down?
No, I cannot acess stock recovery. I have tried only froyo ones. Can you give me the link for that BL6 GB, I`ll flash it tomorrow because I really want to fix my flashlight.
markos807 said:
No, I cannot acess stock recovery. I have tried only froyo ones. Can you give me the link for that BL6 GB, I`ll flash it tomorrow because I really want to fix my flashlight.
Click to expand...
Click to collapse
Try any from a range 4.5.1-134_DFP-125 up to DFP-161. Higher are usually BL7, lower are BL5, so no use to flash
Link to the sbfs
I have succesfully boot up a phone with this sbf: DEFYPLUS_U3_4.5.1-134_DFP-125_GR_SIGN.. but my flashlight is still not working. The camera is not working at all.
markos807 said:
I have succesfully boot up a phone with this sbf: DEFYPLUS_U3_4.5.1-134_DFP-125_GR_SIGN.. but my flashlight is still not working. The camera is not working at all.
Click to expand...
Click to collapse
Well, I suppose you've burnt your flash unfortunately with chinese froyo.
Your camera will not work with GB ROMS. It's normal. but it was you who flashed BL6 ROM on your green defy
You have to go to CM10 2ndboot builds to have your camera working again.
For flash I suppoose only moto service can help