Hello all,
I've got the SGS II for about 1 week now and at first I thought it was a software issue. The thing is, when I'm on a very light colored background ( Market, facebook, whatsapp or whatever ) You see smudged out stripes from the text or any picture that is on there. They're all faded stripes. I thought it was banding but this is something totally different.
What's even more weird- it only happens when I'm outside the house, so my guess is that the brightness sensor plays a part in this? When I'm inside the effect is minimal to none but when I go out or to a very bright place, the stripes are extremely annoying. ( will take pictures for reference when I get the chance )
Would you say this is a manufacturing fault?
Please help if you've encountered something similiar.
Thanks!
Here are some images, the stripes are not that evident right now. They seem to get worse when I'm in the sun.
Looks like some polarising effect.
Should I return to the shop to get this swapped? It seems to me that the screen is defect???
Return!! It seems alot of people are having screen problems.
Same issue on my SGS2.
Was perfect during one week then theses anoying stripes!!!
Did you perform a 1:1 exchange?
There were similar problems on the Sensation forum and it was found to be app/widget conflicts.
If you turn off auto-brightness and also the power saving lcd brightness mode under display in settings does it still happen? You mentioned it happens when you go outside so was curious if you adjusted brightness manually if it still happens
Sooooo....
Yesterday evening I changed form litening 1.5 to the stock rom on KF1 with full wipe.
After that stripes where still there.
Went to bed.
Woke up this morning: Big surprise stripes were almost invisible!!!
Battery 40%
BUT
today I used the GPS google navigation during 1h and discovered that theses stripes appeared again and they are very strong.
- No link with app/widget, nothing installed .
- Didn't touch on settings display auto-brightness before the problem. Tried after but nope.
I tried this today
(all credits to Cost from french forum tmaddict)
Flashlight to use white light during half an hour.
Stripes almoust disapeared...
Then picture with high contrast and color.
Stripes came back.
Conclusion :
With SGS2 you can encounter a display refresh problem.
Not solved btw => screen defect => exchanging it today.
Thierry.
Today my hd2 has shown some strange color issues: Grey / Transparent black causes a grin/yellow tint. I did the usual troubleshooting (soft and hard reset) but it did not help. I also read some old threads about it saying that I should flex the screen to make it go away (http://forum.xda-developers.com/sho...m.xda-developers.com/showthread.php?t=1003265). I tried that without luck though I'm not sure if I "flexed" the screen enough but I'm afraid of breaking it.
Anyone an idea what caused this problem? I did drop the phone a few times over the years, however, today, when it all started, not. Secondly, I can't really think of a broken screen as it seems that only a specific grey is tinted yellow/green (the grey whatsapp uses for their contact without photos and the grey used for the keyboard when you eneter your pin.
Any help is really appriciated... Don't want to loose the king :crying: as this color issue makes really unconfortable.
chabun
EDIT: I'm on a european hd2 with the latest Pdaimatejam WP7 rom (v8.2) and I even tried to reflash the rom... Seems a hardware fault:crying:
Today morning the issue faded away without doing anything at all . Might be that the screen got somehow pressure causing some disorder of the fluid crystals and with time, they reordered themselves...
So i've had my Nexus 4 for just over 2 years now. It's stuck by me through thick and thin, i think this might be the end though.
Anyway, so i picked the phone up at around 2 am this morning, it had been working perfectly all day up to this point. So i picked it up, the colours on the screen are a bit weird. I change what's on the screen and the colours remain weird, so i do the standard thing of a reboot to see if that clears it up. This is where the big issue comes in, when the phone turns on again, there's a 1 cm wide black bar on the left side of the screen. Nothing appears to affect it, but sometimes it randomly appears greyer than others.
The rest of the screen has the same weird colours as it did before i restarted, kind of muted, and moving light areas on the screen (like app icons) makes bars of lighter colour move across the screen with them.
If i didn't know that the phone hadn't been dropped i'd be saying that the screen was just broken right now. But i flashed CM12 (was on the latest PA beta) and when the phone was restarting the whole screen flashed working for a split second before going to its broken state again. This hints at the issue being software related, especially given that it initially happened with no physical damage occurring to the phone? When thinking about this, the colour issue reminds me of what happens when you installed CM11 with the wrong kernel and it looks messed up...
Anyway, I think my phone is dead, and i'm posting here in case someone has some genius idea as to what on earth killed my phone.
I'm pretty good at doing stuff with the phone, so can flash and install whatever, hindered only slightly by missing 1 cm of the recovery menu. I would take pictures, but normally i use my phone as a camera and...... If any more info would be useful then please ask!
Thanks for any help, ideas or input in advance!
T
I have yotaphone 2 from tinydeal germany. (I think they flash the ROM to change the language.)
The phone worked fine at first but now the e screen on the back is doing strange things, leaving images of previous pages showing through the current page. This means, for example, on the clock face the clock is faint on a grey background and as the fingers move they leave a black after-image. Pages that should be black look speckled grey. Any suggestions for cause and a fix?
Unfortunately this is how (older) EPD screens work. When updated they somtimes leave a ghost image behind. To eliminate this the screen needs to be flashed white/black/white before redrawing and with the low refresh frequency of EPD this results in a very flickering image. So there is nothing wrong with your screen, this is just how EPD screens work. See also here https://en.wikipedia.org/wiki/Electronic_paper#Disadvantages
Thanks, but this ghosting or layered imaging is much more severe. I know someone else with the same phone where black is black and whilst there is very slight ghosting of things like clock fingers it is nothing like this current phone. The phone was fine when we got it, and the layered/grey imaging has started without me doing anything. I only mentioned flashing of the ROM because Tinydeal have told me that that is what they do to change the language on these phones.
So from the Wikipedia entry and your comments I now assume that the phone should automatically flash black/white between page changes but it isn't doing it.
The ghost images don't appear if you load something like chess or sudoko onto the rear display but appear again as soon as the regular Yotapanel or Yotacover is used.
I have the same problem, but only when the white theme in the Yotahub is turned off (so the dark theme is active) or when I use the Yota Mirror. The ghosting is terrible. When I use the white theme, it looks like it should look. I am not aware of any changes I made to my phone yesterday, but in the afternoon this problem started.
Does someone know how to check if the screen is flashing/refreshing correctly and if not, how to repair this?
Update: when I put a completely black screen on the back, it is spotty. The black is not black, but dark grey, and there are many lighter spots on the screen.
Update 2: the white theme has this problem too, but less visible. The white starts as real white, but because of ghosting becomes slightly grey. With black it is much more noticeable, because black does start as dark grey.
Well this may only turn out to be a temporary fix but I went through the Yotapanel pages repeatedly and very rapidly using the bottom of the page buttons.
I got all sorts of shades of grey and multiple overlying images but then the phone suddenly showed a clear black and white page with clock.
Ringing the phone from another phone produced a clear missed call message on the back of the phone and then after a minute the clear black and white clock page came back. I am leavng the phone without looking at all the othe Yotapanels or the Yotacover for the moment in the hope that something just got out of phase in the software and the phone might now settle down to correct operation again.
I have the same problem. It has started a few days ago and it gets worse every day.
Unfrtunately the problem has returned on my phone although I was able to get back to a black screen with the clock after three page changes using the bottom left arrow. This time a missed call message came up very clearly on the back of the phone but after the missed call message cleared the whole of the back of the phone was speckled grey with a very faint clock image. One question though: is this just the phones from Tinydeal where they have apparently flashed the ROM, or is it all phones?
https://play.google.com/store/apps/details?id=com.lggfc.nookclearscreen
That's the app for Nook ereader to refresh its screen and get rid of ghosting. Works also on Yotaphone.
What always works for me to clear the screen when the ghosting annoys me is to switch to Android on the EPD screen (by holding the circle button and choosing the left option) and switch back right away using the same procedure. This always leaves me with a clean black back.
Thanks Keeper and VirtualL.
Tinydeal asked me to upload a video to demonstrate the fault, and no sooner than they did that the phone started behaving normally again!
So if it goes again the first thing I will try is that page sequence, and if it fails the App.
I have to say that these are really fantastic phones. I think that a lot of original reviewers completely overlooked the basic issue of not being able to see a phone screen in bright sunlight, but that the yotaphone overcomes this problem.
Resolved by switching the back to front screen views a couple of times. Getting the front screen to mirror on the back seems to give that hard black and white interscreen flash that clears previous images.
Lothor said:
Resolved by switching the back to front screen views a couple of times. Getting the front screen to mirror on the back seems to give that hard black and white interscreen flash that clears previous images.
Click to expand...
Click to collapse
I don't know if you already use it but this widget makes it very easy to switch between mirror and back. Just one click on the widget.
http://forum.xda-developers.com/yotaphone-one/development/widget-yota-toolbelt-t3145462
Last week, I got a chinese version (YD206) through GearBest. I had the same problem what you mentioned. (Black was always Grey and was never black and lot of ghosting). Until yesterday, I used to think that's how the e-Ink display works so I was using White theme all the time.
After seeing your post, I tried using Nook cleaner software and it did not help. Then, I removed the screen protector which the phone came with. For the next 1 hour, I did not see any difference. I left it thinking it could be ROM issue.
But, after few hours, I noticed everything became normal. Now, the e-ink screen looks goergeous in BLACK.
VirtuaLeech said:
What always works for me to clear the screen when the ghosting annoys me is to switch to Android on the EPD screen (by holding the circle button and choosing the left option) and switch back right away using the same procedure. This always leaves me with a clean black back.
Click to expand...
Click to collapse
This issue keeps coming back and I am not able to find a guaranteed solution to this.
Like you described, activating and deactivating Yota Mirror in quick succession clears the ghosting and makes the screen BLACK. At other times, it does not work at all.
I even try swapping to different Yota Panels, but it is a hit and miss. Is this issue specific to Chinese version of YD206?
How to solve this issue permanently?
If not possible, is there any known step which I can do to clear the ghosting?
prasathvishnu said:
This issue keeps coming back and I am not able to find a guaranteed solution to this.
Like you described, activating and deactivating Yota Mirror in quick succession clears the ghosting and makes the screen BLACK. At other times, it does not work at all.
I even try swapping to different Yota Panels, but it is a hit and miss. Is this issue specific to Chinese version of YD206?
How to solve this issue permanently?
If not possible, is there any known step which I can do to clear the ghosting?
Click to expand...
Click to collapse
I have the same problem with a GearBest YD206 running Android 4.4.3. Would updating the firmware change anything?
Hey Yotaphone Users!
I finally have a solution for this problem, that I received from the Yota Phone Support:
"If you see that ghosting is amplified, try to do some steps. Try to discharge the phone completely. Then leave it discharged for long periods of time, f.e. overnight. Then charge the phone to 100%."
For me that worked perfectly!
For me the discharge-recharge didn't work at all.
Discharged untill it switched off. Turned it on again untill switched off, untill phone wouldn't start up again. So: battery was flat.
What happened was: EPD turned black. Yohoo! Happy!
But: after one night discharged, i put it on charger again. Screen switched on, and ghosting was immediately back.
Disappointed. Very disappointed.
Anyone has a different solution?
stoerebink said:
For me the discharge-recharge didn't work at all.
Discharged untill it switched off. Turned it on again untill switched off, untill phone wouldn't start up again. So: battery was flat.
What happened was: EPD turned black. Yohoo! Happy!
But: after one night discharged, i put it on charger again. Screen switched on, and ghosting was immediately back.
Disappointed. Very disappointed.
Anyone has a different solution?
Click to expand...
Click to collapse
Sad to hear that.
Did you remove the screen protector from the back side as in the post #14 the user said that after removing the epd screen became normal black again?
Has anyone heard and try heating with hairdryer the EPD screen for 2 minutes (not too hot) to eliminate ghosting?
Hello,
So my S7 edge got a replacement display due to being broken like 2 months ago. Today purple smudges started to appear, when I used the device for quite some time heavily and it got quite hot. They disappear when I change display mode or when brightness changes. But sometimes reappear. Is this a defective Display, should I get it replaced via warranty again?
Mine does the same thing, but it has never been repaired or suffered any kind of serious damage. It's not that annoying either.
Could it be some kind of factory defect?
When googling I found it clearly is a hardware display fault. As I had my display swapped by a third party mobile repair shop, they would be the ones to make accountable.
It only occurs at certain brightness settings, and not in all apps/states of display - mostly in those which are really bright like chrome browser without tab open, or dict.cc dictionary app.
I'll keep an eye on the issue and just demand warranty, as this display isn't even 2 months old now. They give 6 months of warranty on exchanged parts. So if it does not go away, I'll just get it replaced again.
It just occured today out of the blue, after flashing custom rom / flashing some stuff and constantly playing on the phone, and it became a bit hot.
It occurred exactly the same to me, after flashing a custom Rom. Now I can't remember which one, but it changed the screen's aspect ratio to simulate the S8's.
After that I flashed stock and the problem kept happening
But I don't think this can be caused by a custom rom... it's a hardware fault.
I hope so because I really wanna install a custom rom ;(
Google the issue - it happened a lot apparently and there is literally no connection to custom Roms - it's a defective Display. I did not have the issue anymore BTW.
I have to get back at this again. I recognized that I can Only see these smudges under certain conditions. I can not see them when I am inside. Only outside, and Only from specific angles - also dependant on screen brightness. When I cover the screen with my hand they disappear.
At first I thought it could also be some fault with the transparent protection skin I also applied one day before first noticing this purple screen problems. But the thing is - they move when scrolling, Only in a small portion of the screen but they go up and down.
The fact I can Only see them in daylight makes me wonder if it's got anything to do with the surrounding brightness sensor that does the automatic brightness and display mode for you.
I find it very strange that I can not provoke the issue indoors, also not if I set up brightness to max.