Database Users

No Speed Dial w/ Froyo?

so what's the deal with no speed deal in froyo. i haven't really seen any mention of it by anyone else. i've installed the regular foyo and now again just installed the clockwork version of froyo (after a data wipe) and both couldn't retain phone numbers in the speed dial list.
is there a way we could extract a db or file and manually edit our speed dial lists since it doesn't seem to work setting it up on the phone itself?

wow... can't believe no one's responded.
maybe i should rephrase the question/concern:
does your speed dial work with froyo?
maybe i'm the only one having problems.

You might want to wait more than six hours before flipping out. Not everyone lives on these forums.

actually i'm far from flipping out... but thanks officer
it is what it is really... i was just surprised is all.

Works for me, just tested it out.
Method that works for me:
-Go to Dialer.
-Hold the number you want to map someone to (in my test case, #2)
-When prompted, select the number you want assigned
-Exit Dialer
-Reboot phone
-Re-enter dialer
-Test call

byproxy said:
so what's the deal with no speed deal in froyo. i haven't really seen any mention of it by anyone else. i've installed the regular foyo and now again just installed the clockwork version of froyo (after a data wipe) and both couldn't retain phone numbers in the speed dial list.
is there a way we could extract a db or file and manually edit our speed dial lists since it doesn't seem to work setting it up on the phone itself?
Click to expand...
Click to collapse
it works for me
Like DivinityCycles stated:
1. Go to Dialer.
2. Hold down number you want to map someone to.
3. Select the number you want assigned.
4. Check by holding down number.
or the regular way, but dont search for the contact; seems it doesn't work that way, just scroll to the person you want assigned to that number.
both methods has worked for me. hope this helps.

dr154 said:
it works for me
Like DivinityCycles stated:
1. Go to Dialer.
2. Hold down number you want to map someone to.
3. Select the number you want assigned.
4. Check by holding down number.
or the regular way, but dont search for the contact; seems it doesn't work that way, just scroll to the person you want assigned to that number.
both methods has worked for me. hope this helps.
Click to expand...
Click to collapse
awesome!!! thanks to the both of you (the one's that actually helped)!!
the problem was that i was searching for the contact to add. doing a scroll search and adding that way is what worked. thanks again folks! much appreciated!!

no problem. glad we could be of some assistance...

dr154 said:
it works for me
Like DivinityCycles stated:
1. Go to Dialer.
2. Hold down number you want to map someone to.
3. Select the number you want assigned.
4. Check by holding down number.
or the regular way, but dont search for the contact; seems it doesn't work that way, just scroll to the person you want assigned to that number.
both methods has worked for me. hope this helps.
Click to expand...
Click to collapse
Interesting, running KaosFroyo 31, when I go into my dialer (ie phone? where I'd call somebody from, correct?) and hold down a digit it doesn't do anything w/a long press, even a super long press.
OK, just learned via a Google search that LP hides the "dialer" - are there dialers (free) on the market, or is there a way for me to access dialer on an LP phone?
PS - Should note I'm running an Eris w/2.2 Kaos 31 on it, but I don't think that'll make a diff

I'm in the same situation in which chimpsnest is (even a super long press to the number doesn't trigger any pop-up) but googling didn't helped me.
Any help from your side ?

the gladiator said:
I'm in the same situation in which chimpsnest is (even a super long press to the number doesn't trigger any pop-up) but googling didn't helped me.
Any help from your side ?
Click to expand...
Click to collapse
I had the same problem on cm 6.1. I found that I had to push the number I wanted to assign, then hit the + sign on bottom left and the contact list pops up, then pick the contact to assign to the number. Hope that helps, if you still haven't fixed it.

DivinityCycle said:
Works for me, just tested it out.
Method that works for me:
-Go to Dialer.
-Hold the number you want to map someone to (in my test case, #2)
-When prompted, select the number you want assigned
-Exit Dialer
-Reboot phone
-Re-enter dialer
-Test call
Click to expand...
Click to collapse
Doesn't work in VM Samsung Intercept 2.2 froyo
:\

Problem With CyanogenMod 7, Please Help

Hello,
I flashed the 7.0.0-RC1-Glacier last night with no problems. This rom is freakin amazing and I plan on making a donation after writing this.
I noticed some things that might be wrong with the CM7 but am not sure if its cause of me or the rom. I will explain.
*********
The "g" button located at the bottom right side does not work. Meaning, when it was stock and I pressed that button, it would load that app that says you can speak your commands, like text bill or etc.
When it was stock on the keyboard I could choose "speak the message" or use SWYPE...but in CM7 I dont see that option on the keyboard.
Also, when I first flashed the CM7, I went to camera just to check it out...and when I took a picture, the shutter didnt make a sound, which was GREAT! But then the next day I went back to camera and now everytime I take a shot, the shutter makes that noise.
So far thats all I can find for now.
Thanks in advance,
Brian K

fst2011 said:
Hello,
I flashed the 7.0.0-RC1-Glacier last night with no problems. This rom is freakin amazing and I plan on making a donation after writing this.
I noticed some things that might be wrong with the CM7 but am not sure if its cause of me or the rom. I will explain.
*********
1) The "g" button located at the bottom right side does not work. Meaning, when it was stock and I pressed that button, it would load that app that says you can speak your commands, like text bill or etc.
2) When it was stock on the keyboard I could choose "speak the message" or use SWYPE...but in CM7 I dont see that option on the keyboard.
3) Also, when I first flashed the CM7, I went to camera just to check it out...and when I took a picture, the shutter didnt make a sound, which was GREAT! But then the next day I went back to camera and now everytime I take a shot, the shutter makes that noise.
So far thats all I can find for now.
Thanks in advance,
Brian K
Click to expand...
Click to collapse
1) On CM7 the "g" key is used for a search key, if you long press it you should be able to use the native "google speech" application.
2) CM7 only comes loaded with the AOSP keyboard. Swype is closed source and not open for anyone to use on their builds. The MySense Rom that are customized like I/G are modified variants of the current ROM. They didn't build a fresh ROM they just edited T-Mo's.
3) Most phones will have shuttle sound to prevent people from taking pictures that aren't warranted, or taking "certain" pictures that people are unaware of. you can delete the .ogg file for the sound to perm-remove that sound if you should so choose to do so. i believe it's in the /system/media/audio/ui file.

Swype may be available to you, through swype.com's Beta program, if it is still active:
http://beta.swype.com

jggimi...I tried that download and it didnt work. However, I found another app that does the same thing as Swype...this one is called "SlideIT Keyboard" its a app u have to pay or find a beta....but it does work I have it running on CM7
Hope this helps
Brian

Guys, I loaded CM7 yesterday and for some reason my app market is gone. cant install it, dont know how. any ideas? links for install?

shalomhr said:
Guys, I loaded CM7 yesterday and for some reason my app market is gone. cant install it, dont know how. any ideas? links for install?
Click to expand...
Click to collapse
Did you flash the Gapps (Google Apps) with it too?

I wiped the phone so im guessing everything went with it

shalomhr said:
I wiped the phone so im guessing everything went with it
Click to expand...
Click to collapse
download the gapps and then flash it and see what happens.

pinoyz said:
download the gapps and then flash it and see what happens.
Click to expand...
Click to collapse
This guy hit the nail on the head. CM7 is a AOSP project ROM.
I bet your Maps, Email, Google Talk, Market, and some other little ones are missing.
Download the G/apps from Cyanogen and flash them, after a wipe and you should be good to go.

I believe my post was just hijacked....get out and start your own thread....Lol
Anyways...Aside from the swype issue...any ideas on how I can get back the "genius" feature. Please it would be very helpful.
Thanks
Brian K

[Guide] Newbie to Epic 4G Cyanogen - Common problems solved

Hello,
I am writing this to help other newbies who may want to switch to Cyanogen for the first time on their Epic 4G. There were a few things I needed to do after to get everything working the way I liked and I figure this will save some people time.
What do I need to do prior?
There are many how-to's which will help but I had my Epic stock rom rooted so it was as simple as flashing cyanogen through recovery. Here is the link for a "how-to" root the stock rom if you wish to do it this way. It was the easiest way for me though the official guide says "Rooting the stock firmware is neither recommended nor necessary."
http://www.youtube.com/watch?v=C9eaCtiS0Bo​
Where do I get Cyanogen?:
You can download it here. I am running the 10.0.0 stable build.
http://wiki.cyanogenmod.org/w/Epicmtd_Info​
I have no google apps:
This is a problem with any Cyanogen installation. Easy fix, download & install the gaaps package from the link below and your marketplace will be back.
http://goo.im/gapps​
I don’t have Navigation:
Easy fix again, download the google maps app. Here is the app store link.
https://play.google.com/store/apps/...DMsImNvbS5nb29nbGUuYW5kcm9pZC5hcHBzLm1hcHMiXQ..​
I don’t have voicemail:
While you can use any voicemail app I wanted the one I had on the stock rom. I linked the app below and your voicemail will be back as soon as you install it. You need to open the app after so that it will activate.
https://od.lk/d/MjRfMjc2MDY5MF8/vtt-sprint.apk​
I am getting texts from 9016 every time I get a voicemail:
From reading it seems the stock rom blocks us from seeing these but they are in fact needed for voicemail to work. To fix this I used a free app called “RedList”. Simply add 9016 to the RedList within the app, change the settings to disable both notifications, and this will problem will be solved. Here is the app store link.
https://play.google.com/store/apps/...=W251bGwsMSwxLDEsImNvbS5saW5ub3IuUmVkTGlzdCJd​
Text messages no longer have separate colors for me and my recipient:
The stock android text display is white and I hated this after getting used to Samsung’s nice colors but luckily you can solve this in two ways.
(One) A theme manager is built into the interface section of your settings page. After searching through almost every free CM10 theme I found this one I liked. It does NOT touch too many things only adding a brushed metal look and displaying text messages how I wanted them. There are a few colors to choose from but I went with Blue.
http://forum.xda-developers.com/showthread.php?t=1992980
(Two) Replace only the MMS app with one that is color coded. Please note that unlike the above, to reverse this down the road you will need to find a stock mms app package with an installer. This is good for people who are sure they want this and only wish to change the colors of the messenger, while the above is good for people who like to switch themes often being able to revert back at any second. Link for the colored mms app.
http://www.mediafire.com/?hcjukwwkj4y41h3
Morror: https://od.lk/f/MjRfMjc2MDY5MV8​
Facebook pictures no longer sync with my existing contacts:
This is a small problem, but still one that I got used to having with the stock rom and wanted to correct. From reading this seems to be a problem related to later Android versions, not just Cyanogen. The fix for this is easy as well, search out a free app called “UberSync for Facebook”. I had the regular facebook app installed & logged in prior and UberSync logged right in, got the pictures, and updated my contacts.
https://play.google.com/store/apps/...wsMSwxLDEsInJvLndlZWRuZXQuY29udGFjdHNzeW5jIl0.​
I no longer have Swype:
Despite having the nice physical keyboard (the whole reason I got the Epic) I still got used to using Swype here or there. I don't think I will be allowed to link this file here but you can find it on "certain" sites.​
Notes:
Despite reports that Bluetooth can be problematic, I use it daily with an earpiece and have yet to experience any issues. GPS & 4G also work great. If any links are broken send me a PM! I check my email daily.​

Get rid of the dropbox download links. Those are absolutely horrible when posting a guide for others to use.

nikon120 said:
Get rid of the dropbox download links. Those are absolutely horrible when posting a guide for others to use.
Click to expand...
Click to collapse
Why are they so bad? The bring you right to the download and I won't be deleting these files from my dropbox. Much better IMO than dealing with one of those sites where you have to wait 45 seconds for a download link to appear in a sea of other spam download buttons.

protivakid said:
Why are they so bad? The bring you right to the download and I won't be deleting these files from my dropbox. Much better IMO than dealing with one of those sites where you have to wait 45 seconds for a download link to appear in a sea of other spam download buttons.
Click to expand...
Click to collapse
Well...
No MD5/SHA1 to compare against to make sure you have a complete download.
People's dropbox tends to get too much traffic and the link becomes dead.
You basically cut out the original author(s) of the file.
Based off # 3: They could need the ad revenue, and/or want to track download activity if they're self-hosting.

nikon120 said:
Well...
No MD5/SHA1 to compare against to make sure you have a complete download.
People's dropbox tends to get too much traffic and the link becomes dead.
You basically cut out the original author(s) of the file.
Based off # 3: They could need the ad revenue, and/or want to track download activity if they're self-hosting.
Click to expand...
Click to collapse
I know this isn't directed at me, but the things I have on my box account are older things( Samsung Moment update tool), things I've done for myself, or things that I've found for other people. In other words, things many people don't care about.
Sent from my SPH-D700 using Tapatalk 2

nikon120 said:
Well...
No MD5/SHA1 to compare against to make sure you have a complete download.
People's dropbox tends to get too much traffic and the link becomes dead.
You basically cut out the original author(s) of the file.
Based off # 3: They could need the ad revenue, and/or want to track download activity if they're self-hosting.
Click to expand...
Click to collapse
#1 - I think more people are concerned with a working link, if they download the archive after and it somehow gets corrupted i'm sure they will just try again
#2 - Valid point though my files don't have a great enough of demand to warrant this. If this changes I will change my links.
#3 The only thing that wasn't mine with a dropbox link was the MMS app and I only mirrored it in case the original link were ever taken down. If it will make you happy I can include the original link as well. For the voice mail app, its simply the sprint one ripped from a stock rom.
Though your points are valid, I think you are sort of just being picky bud

Thanks for the VM download link. Only thing I want is task manager which I had installed on CM9. Is there stockish one that works for 10?

Try the flashable one from here
http://forum.xda-developers.com/showthread.php?t=1452004
Sent from my SPH-D700 using Tapatalk 2

swype
I reinstalled swype 3 or 4 times with various upgrades and it would always "expire" and I'd have to figure out how to get it working again. I am running 10.1 RC5 now and it has a decent generic swype-ish virtual keyboard. The thing missing is that you can't finish your text and go back and fix any misspelled words by touching alternate suggestions. You have to catch them as they come up. It seems like at first I could still do that, but I can't figure out how to get the suggestions to come back up.
I'm over swype.

Just flashed CyanogenMod 10.1... is there any built in overclocking?
I installed SetCPU and it won't step above 1000 MHz.

Kernel
Steelcitymetal said:
Just flashed CyanogenMod 10.1... is there any built in overclocking?
I installed SetCPU and it won't step above 1000 MHz.
Click to expand...
Click to collapse
You need a different Kernel. I have been using didy's kernel for a while. You flash CM10.1 and then you flash the kernel. CM10.1 has its own kernel that overwrites what you flash. So when you update, i think you have to reflash the kernel. I haven't screwed around with it since I installed rc5. I think I did CM, then the kernel, then the big mem patch. I never was able to figure out how to update the radio. I always ended up with "no voice service" or worse.
There is a thread in the developer forum that has the links to the kernel downloads. I am running one from may 30 and haven't updated.

boocephus said:
You need a different Kernel. I have been using didy's kernel for a while. You flash CM10.1 and then you flash the kernel. CM10.1 has its own kernel that overwrites what you flash. So when you update, i think you have to reflash the kernel. I haven't screwed around with it since I installed rc5. I think I did CM, then the kernel, then the big mem patch. I never was able to figure out how to update the radio. I always ended up with "no voice service" or worse.
There is a thread in the developer forum that has the links to the kernel downloads. I am running one from may 30 and haven't updated.
Click to expand...
Click to collapse
I think I found it... Is didy the same as didhiy?
[KERNEL][CM10.1]Nitest Kernel for Crespo4G/Epic4G Modem with Voodoo Sound&Color
When you say you couldn't update the radio, you just mean the cell service radio, right? Not wifi? I don't have cell service on my Epic, so that wouldn't be a problem for me... just as long as the wifi radio still works
Also, what specifically do you mean by "or worse"?

Steelcitymetal said:
I think I found it... Is didy the same as didhiy?
[KERNEL][CM10.1]Nitest Kernel for Crespo4G/Epic4G Modem with Voodoo Sound&Color
When you say you couldn't update the radio, you just mean the cell service radio, right? Not wifi? I don't have cell service on my Epic, so that wouldn't be a problem for me... just as long as the wifi radio still works
Also, what specifically do you mean by "or worse"?
Click to expand...
Click to collapse
Yeah. That's the one. I looked at my about phone and it said "didy".
I saw a thread about the nexus radio being hot **** and I fooled around with it. I got either "no voice service" or no nuthin. I was able to flash back to the regular epic radio. there is another thread that had all the flashable zips with different modems. luckily the epic one undid my stupidity - at least on my phone.

boocephus said:
Yeah. That's the one. I looked at my about phone and it said "didy".
I saw a thread about the nexus radio being hot **** and I fooled around with it. I got either "no voice service" or no nuthin. I was able to flash back to the regular epic radio. there is another thread that had all the flashable zips with different modems. luckily the epic one undid my stupidity - at least on my phone.
Click to expand...
Click to collapse
Thanks man, I'll give it a shot. CM10.1 is running pretty smoothly on my phone, but it could be better and battery life is not an issue for me.
I'll be sure to run backups before I do though :good:

Thanks
These tips helped - I just made the jump to CM 10.1, and although there are a few quirks it has been great. Your list really helped.
FYI, one thing I ran into was the auto-rotate didn't work. I followed the directions here:
http://epiccm.blogspot.com/2012/01/boot-el30-stock-from-sdcard.html
the first time, there was no change. I tried again (and calibrated like 6 times) and it worked.
Has anyone noticed the physical keyboard doesn't always work the same? In some places, you have to hold down shift or Fn while pressing the key you want (for example - hold shift while pressing A, rather then pressing shift then pressing A). It's not consistent - some inputs work like the keyboard did before. Does anyone have any suggestions how to fix this. Not the worst thing (I'm just glad I still have a physical keyboard), but I would prefer it work the way it did before, or if that's not possible, at least be consistent.
And the smiley face button on the physical keyboard doesn't work either. I mean, it's like 2005 where I have to type out my 's!!

any phantom voicemail fix?

phantom voicemails?

TheSkipperCDB said:
Has anyone noticed the physical keyboard doesn't always work the same? In some places, you have to hold down shift or Fn while pressing the key you want (for example - hold shift while pressing A, rather then pressing shift then pressing A). It's not consistent - some inputs work like the keyboard did before. Does anyone have any suggestions how to fix this. Not the worst thing (I'm just glad I still have a physical keyboard), but I would prefer it work the way it did before, or if that's not possible, at least be consistent.
Click to expand...
Click to collapse
I have noticed that the physical keyboard doesn't work right in the browser. Shift and Fn don't seem to work. I am usually in such a hurry that I just close it up and use the virtual keyboard if I want to have punctuation. It honestly didn't occur to me that it might be fixed. I can't offer that fix. I am just offering emotional support and validation.:good:

boocephus said:
I have noticed that the physical keyboard doesn't work right in the browser. Shift and Fn don't seem to work. I am usually in such a hurry that I just close it up and use the virtual keyboard if I want to have punctuation. It honestly didn't occur to me that it might be fixed. I can't offer that fix. I am just offering emotional support and validation.:good:
Click to expand...
Click to collapse
I noticed that the default browser you have to hold the shift or fn key while pressing the desired key to get it to work. Apps and os seem to work with a tap od these keys and then a hit of the desired key.I recall a while back a thread about the smiley and since it was not a default key the consensus was that they would not be adding the functionality to cm. While on the topic...same goes with the .com function.
Sent from my SPH-D700 using xda app-developers app

I'm sorry i want to ask, how we modify system setting look in CM? Thank you..

[Q] ATT S4 adds + to calls, making them fail

Hi everyone,
I've got an ATT I337 running the awesome Hyperdrive ROM version 17.1. Several of us --but clearly not all of us!-- over in that thread have noticed a problem with incoming calls. I think there's a setting somewhere that can fix it, so I'm opening it to a wider audience by posting it here, in hopes someone from this group will know what to tweak.
Here's the specific problem.
If my cell phone receives a call from a known contact "Bob" and Bob's contact info (being a U.S. phone number) is 317-555-1212, so far the phone seems to recognize the call as coming from Bob. However, it reports it as coming from +317-555-1212. When I go into the call log and try to return the call, it dials +317-555-1212, and the extra + causes the system to interpret it as an international call attempt, and the call fails. Cannot be completed as dialed, the message says. If it's an non-contact number, the + is still added. IT's not JUST for contacts.
Let's say Bob leaves a message. The voicemail indicator shows and it says offers to dial *86, the correct access code for voice mail for ATT as I understand it. However, tapping that actually dialed +11 then my ten digit phone number. Call fails.
At the dialpad, pressing and holding 1 to invoke voicemail has the same problem.
In Contacts, contacts are NOT listed with +s, and clicking the call button for them makes them dial OK without a + being prepended.
So, this looks like some international feature is being enabled that I'm not sure how to turn off. Does anyone have any idea how to turn this off? Sorta puts a crimp in the basic phone functionality. Seriously, who actually calls anyone these days? But it would be good to fix.
Please, if anyone has an idea of what might be at the root of this, I would appreciate your help!
Marc

I am confused. Does this only happen on the Hyper rom or all roms for you.
Not sure how anyone else does their contacts. But, I always enter numbers as 1-555-555-5555 even if local.
My voicemail number is set as +15555555555
I never had issues--
I remember some talk of that on Hyper awhile back. But, never paid attention--

Only happens on Hyperdrive. Or at least, I can say I never saw it on stock. Hyper is the only ROM I've actually gotten so far as to run while SIM card is inserted. :good:
My contacts are almost all US based and are just ten digits, no leading 1. I did try editing the contact to my work cell phone by adding a 1 to it, and calling my S4 phone. It still was registered as +317-555-1212 format and return call didn't work.
So, it's not really about the way the contacts are stored, more about how the phone interprets incoming calls.

Try the 1+ and see what happens. Just do a few of your most used numbers to start--
Can you put a different dialer on phone and see

rugmankc said:
Try the 1+ and see what happens. Just do a few of your most used numbers to start--
Can you put a different dialer on phone and see
Click to expand...
Click to collapse
Just edited above, adding 1 to the way contacts are stored doesn't change the behavior. I can certainly try a different dialer and see what happens, but it seems to be based on how incoming calls are interpreted. I'm guessing there's a build.prop item or somesuch that needs a-tweaking.
Marc

so you changed the contact number to 1-555-555-5555 with hyphens
i ran hyper for quite a bit awhile back never any issues. of course could be something new--
i am not thinking rom or a lot more would have issue--

I did some tests.
On the phone in question, I edited the google contact for a test phone number. I then called the phone from that tested phone number.
It didn't matter whether the contact was saved in the formats:
317-555-1212
1-317-555-1212
+1-317-555-1212
+317-555-1212
In all cases, the incoming call was recognized as +317-555-1212, which isn't a valid call-back number, and return calls failed. Since this only happened when I put a custom ROM on, I'm sure it's something buried inside the ROM. However, I'm at a loss as to where to check various settings.
Gotta be something deep in there...

If all else fails you can Odin back to stock, reformat your internal card and reroot.
Under Phone Settings/Additional Settings/My Phone Number--is it in format 15555555555
Also, and I don't know where to check, your country code may not be set. I don't know if we even have that setting anymore or would it be in Build Prop.
Probably under ro.something

rugmankc said:
If all else fails you can Odin back to stock, reformat your internal card and reroot.
Under Phone Settings/Additional Settings/My Phone Number--is it in format 15555555555
Also, and I don't know where to check, your country code may not be set. I don't know if we even have that setting anymore or would it be in Build Prop.
Probably under ro.something
Click to expand...
Click to collapse
Interesting thought. I had gone into the dialer settings, and checked the Current Country... it listed United States of America. Then I stopped. But looking further it turns out that in the Assisted Dialing settings just below that, there might be stuff that matters. Currently my assisted dialing is OFF. The settings inside are:
Country code: 1
IDD prefix: 011
NDD prefix 1
City/area code: 131
National number length: 11
The area code probably doesn't matter, but I'm interested in the national number length. Ours tend to be 10. Could you please see what your settings are in there, and let me know if anything is different?
I can always backup (ug, safestrap backup), return to stock, poke around, re-root/restore. But if you could take a quick peek I'd be grateful.
Thank you!
Marc
I tried an alternative dialer... it acted just like the stock with the + thing.

I am on a rom that doesn't have those settings--sorry

Thanks anyway! I experimented changing the last setting to 10, and enabling assisted dialing, and it didn't change anything. Sigh.

Ok, you can still go back to stock with Odin. Or, try one of iB's roms they are very good too, I use them almost exclusively now--
Good Luck--:good:

Yeah. I've been back to stock a couple times with Odin. I've got the process down pat! I prefer the hyperdrive rom if I can work through the few small warts. It's just such an elegantly crafted piece of work. Worth the effort, if I eventually sort out the call issue. Appreciate your help.
Sent from my SCH-I337 using Tapatalk

Frankenscript said:
Yeah. I've been back to stock a couple times with Odin. I've got the process down pat! I prefer the hyperdrive rom if I can work through the few small warts. It's just such an elegantly crafted piece of work. Worth the effort, if I eventually sort out the call issue. Appreciate your help.
Sent from my SCH-I337 using Tapatalk
Click to expand...
Click to collapse
i got the same problem too. We'll get it figured out!

Damani311 said:
i got the same problem too. We'll get it figured out!
Click to expand...
Click to collapse
I figured out the clock on status bar thing. Like someone else said it was under the alignment options ... hidden by default. One by one warts going away.
Sent from my SCH-I337 using Tapatalk

Have the same issue here ..can't dial vm..on hyper
Sent from my SCH-I545 using XDA Premium 4 mobile app

jshua said:
Have the same issue here ..can't dial vm..on hyper
Sent from my SCH-I545 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If you haven't done so yet i suggest noting the issue in the hyper thread ... either the Verizon or att one depending on your phone. Seems to be a bunch of us... more folks report it the common thread will emerge.
Sent from my SCH-I337 using Tapatalk

Same issue here i can not dial voicemail and can not call a number back without typing the number in manually. Deal breaker for me hope it gets fixed soon so i can go back to Hyperdrive. Or somebody comes up with some sort of fix.

Download Prefixer and remove the + for outgoing call

BBG037 said:
Download Prefixer and remove the + for outgoing call
Click to expand...
Click to collapse
When I get back from vacation I will have to try this. Thanks!

Google Dialer - On LG G3

Greetings XDA Members,
I've searched for quite some time, with limited success on keeping a stock rom along with Google Dialer. The best of both worlds if you will, that would allow great features without the loss of another. It was always a debate between using a AOSP rom at the loss of the camera, or sticking to stock and working with xposed to change settings to an agreeable state. With endless google searches, forums read, and opinions given by others; they all seemed to end with "Not Possible". Well, with some trial and error I have found a workable solution that will allow the Google Dialer to replace the stock dialer, and also allow for "In-callui" to replace the stock one.
It also needs to be mentioned, that I cannot guarantee this will work with your variant, custom rom, or other items not factored into the equation. Though this has worked for me without fail on the ATT Model D850 on Cloudy 2.5 but there are a few details to note. The "In-callUI" will show for both Incoming & Outgoing calls, but you will first see your stock one come up for a brief second or so and switch over. For me, this isn't an issue as I don't immediately answer or hang up when a call completes. Some of the items recommended in the prerequisite are optional and provide other ways to find/adjust permissions, or freeze/delete applications (Stock dialer). I'm not personally an avid developer, but if you have any questions I've been able to gain a great deal of knowledge over the years with hands on experience with the Android operating system. Feel free to ask any questions that may come up, and I'll be happy to assist if possible.
Pre-requisites;
LG G3 - Rooted
Custom Recovery with knowledge on Flashing ZIP files.
Root Explorer / File Manager
Nova Launcher / App to launch an activity.
Titanium Backup (recommended to backup Dialer and other applications in case of damage)
Included in the attachments is the file GoogleStockDialerAndMms. This file is a flashable zip that will automatically adjust the permissions necessary to make calls. It's highly recommended that you make a backup of your current rom with TWRP/CWM in case any issues arise. As this adds two files to your system directory, there is always a chance that an error can occur.
If you choose the route of Nova, you can create a shortcut to an activity. Below I've included a screenshot of which activity needs to be chosen in order to use Google Dialer.
Within Nova Launcher, long-press on the home screen.
Choose "Shortcuts"
Select "Activities"
Find "Google Dialer" in the list, then tap to open it up, and select "Phone" (use the first one in the list)
Can I disable my default dialer?
The short answer is no. As a general rule, you will need to keep your present dialer enabled in order to receive calls. The long answer is that on some phones you might be able to disable your stock dialer, but on others you definitely cannot. Feel free to try it on your own device and let us know what your results are. If you choose to do attempt this, I highly recommend against uninstalling and instead move to FREEZING the phone applications with Titanium Backup or similar root enabled application.

747 views, and 44 downloads. Hopefully everything has been smooth for everyone attempted. Please leave feedback if you have any issues.

Good to see it's over 1200 views and counting. If anyone has any issues, feel free to reply so they can be addressed.

hi @Eruvion, just wanted to check if we get the search feature with your google dialer? or does this depend on the country you live in? thanks.

resitm said:
hi @Eruvion, just wanted to check if we get the search feature with your google dialer? or does this depend on the country you live in? thanks.
Click to expand...
Click to collapse
@resitm As far as I have heard and seen so far, it will work locally depending on the information generated from your local area by google. Please let me know if you attempt it and it doesn't work.

Eruvion said:
@resitm As far as I have heard and seen so far, it will work locally depending on the information generated from your local area by google. Please let me know if you attempt it and it doesn't work.
Click to expand...
Click to collapse
thanks, i will try it once im back home.
yesterday i installed the apk from apkmirror and created a shortcut for google dialer. everything worked as should other that the tab in the most left, i think thats the call history. the dialer FC anytime that icon was touched.

Good job on this even if Im already running an AOSP based ROM, I dont need this.
But you took time writing and explaining everything so thanked all your posts,
Have a nice day

Eruvion said:
@resitm As far as I have heard and seen so far, it will work locally depending on the information generated from your local area by google. Please let me know if you attempt it and it doesn't work.
Click to expand...
Click to collapse
i flashed the zip and everything seems to be working fine. i am also able to search close by businesses, i typed pizza and it showed me the closest pizza places.
the only FC i am getting is in settings when i tap call settings-voicemail, call waiting. i don't use that so its ok for me. thanks again.
also i did not have to create a shortcut, the app icon was there after restart.

resitm said:
i flashed the zip and everything seems to be working fine. i am also able to search close by businesses, i typed pizza and it showed me the closest pizza places.
the only FC i am getting is in settings when i tap call settings-voicemail, call waiting. i don't use that so its ok for me. thanks again.
also i did not have to create a shortcut, the app icon was there after restart.
Click to expand...
Click to collapse
@resitm I'm glad everything worked for you! Thanks for letting me know
@Paradoxxx Thank you for your kind words, I'm just glad I was able to give a small contribution to the wonderful community I've used for years!

Good job on your work! I also like Google dialer. Many thanks

This does work on VS985 5.0.1. The settings does crash if you click whatever the second option was (Went back to stock for my own reasons).

SyCoREAPER said:
This does work on VS985 5.0.1. The settings does crash if you click whatever the second option was (Went back to stock for my own reasons).
Click to expand...
Click to collapse
@SyCoREAPER thank you for the update!

Doesn't work here....either when triggered from a Nova Settings widget or from the icon in the launcher. Instant force close. I can try to grab a log if you think it'll help?
D852, running Dene_Bluesman's rom (basically stock LG 5.0.1)
Edit - wonder if its because the rom version i'm using is odexed? Going to try the deodexed version and report back....
Edit 2 - nope still crashes instantly. Super frustrating! Please let me know if a log will help! @Eruvion

I want to try this on my lg G2, is there any reason you think it might not work? Anything that would make this zip specific to the G3?

+1 on this. would like to see if we can get this to work on Cloudy for G2.

Hi
This thread seem's a bit dead. Anyway i have flashed this file and it works. I am on N&N 1.3 rom. It's a stock mm based rom.