Related
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
What phone D2 or D2 G and which SBF did you use?
I assume you used the 2.2.00 sbf when you needed the 2.3.20 SBF once you have the 2.3.20 update the bootloader is changed and won't accept the 2.2.0 sbf.
IF that's the case you need to try flashing it with the 2.3.20 SBF found HERE
Read the bottom of THIS post if you get a bootloop or stuck at the M logo screen.
it works!! Thank you so much!!
anducly said:
it works!! Thank you so much!!
Click to expand...
Click to collapse
Glad it worked but what specifically worked? I gave a bunch of information, I just want to know which pieces helped in your case.
THANK YOU SOOOOOOOOO MUCH!!!!! I know that this post is a little old but I thought that my phone was finished. Again Thank You!
Thank you sooooooo much!!!! I thought all hope was lost.
Had this problem the other night but all is good now
Sent from my Motorola Droid 2 with Fission 2.3.1
This worked to fix my phone, thx so much
i used the 2.3.20 SBF
will this work on the droid x?
myrakle said:
will this work on the droid x?
Click to expand...
Click to collapse
You probably flashed the wrong SBF. You need to find the latest DX SBF they should be found in the DX section of XDA. Off the top of my head I can't think of the latest release.
Sent from my DROID2 using XDA App
anducly said:
I need help.. I failed trying to sbf my phone and now i see a black screen with this message every time i turn on my phone.
Bootloader
D2.35
Err:A5,70,00,1F
MEM_MAP Blank
Service Req'd
Battery OK
OK to program
Tranfer Mode: USB
What do i do??
Click to expand...
Click to collapse
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw. It goes str8 to the BL screen and has this...
Bootloader
D2.35
Battery OK
OK to program
Tranfer Mode: USB
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD, the start button command stays grayed out. Also in RSD on line 1 of the phone status it shows connected but above that in the device properties box info for the meid/esn etc show N/A.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
I have done some modding on my Droid X such as backing it up, deodexing and put the Liberty ROM on it as well and changing ROMS on my android tablet so I have some of the basics down but after much searching & reading I am seeking help with this one. Thanks in advance!
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps
Ronbo85 said:
I have a similar problem. I just got this phone and dont know the history other than the ESN is clear with vzw.
I Dloaded RSD lite 4.7 an the 2.35 BL sbf as well as the orig 2.2 and 2.3 FW sbf's. RSD will communicate with the phone. I can reload the BL sbf if I open the sbf file but none of the FW sbf will load in RSD.
Click to expand...
Click to collapse
Maybe try flashing in linux and make sure you have read up about flashing SBF's on a DX. I don't know which one to flash as this is the D2 section and I have a D2.
I can access the recovery menu and at the bottom there is an error report for accessing recovery cache in a folder path.
Click to expand...
Click to collapse
This error is normal disregard it.
Can I put an update.zip on an sd card and try to revive this thing that way or maybe I am doing something wrong? I am guessing this is the result of some botched flash job.
Click to expand...
Click to collapse
That would work if you can find an update.zip made by moto that will go through the bootloader. And it doesn't really matter how it got here but probably it is a bad flash or a wrong ROM. (You might try connecting it via wall charger (not USB) while it's powered down then turn it on and see if you can get into clockwork recovery.)
Edit: Now my battery is dead, I have found in other threads that a blank software device wont charge the battery if this helps
Click to expand...
Click to collapse
You need to find someone with a DX to swap/charge your battery with so you can get in and flash it or you need an external battery charger (one that will charge the battery outside of the phone).
Sent from my DROID2 using XDA App
Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on. I will get the battery charged somehow and let you know what I come up with, thanks again
Ronbo85 said:
Hi, thank you for the reply. I know I made comments about my DX I have as well but to be clear this is a Droid 2 I am working on.
Click to expand...
Click to collapse
Oh. In that case you need the 2.3.20 SBF found here http://droid2files.com/tools/VRZ_A955_2.3.20_1FF_01.sbf after you can get the phone charged. (If it helps the D2 has the same size battery as the D1 so you can swap/charge a D2 battery with a D2 or a D1.)
Also try finding RSDLite 4.8 or 4.9 as they might work better for you. I'd give you a link but I Haven't flashed an SBF with RSDlite I just use linux.
Sent from my DROID2 using XDA App
Cool thank you again. I got the battery charging via a rig I have done before with other devices from a camera charger. My linux(zorin) machine lost keyboard function out of the clear blue I havent had a chance to sort it yet(another project lol) but I do have a live usb thumb drive setup to use for linux. I'll try on this windows machine for now.
I'll keep you posted as to the results
well I got the battery charged up. I still have this problem when I select either the 2.2 or 2.3 sbf files the start button for applying the flash stays grayed out as if the files are invalid. If I select a bootloader sbf the start button is ok and I can load the BL sbf. I tried switching to rsd 4.8 too. I will keep playing around with it and maybe try to get my linux pc going.
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
Are you still using rsdlite 4.7? I had problems with it not too long ago. Downloaded 4.8 and worked like a charm. Hope you get it sorted out.
Sent from my ultra fast Liberated Droid 2
Ronbo85 said:
Ok well even tho I had a few copies of the sbf files I went ahead and dloaded the one you linked. It would load in the rsd app but when I hit start to apply I get.... "Failed Flashing Process (0x7100) and this happens right away
Click to expand...
Click to collapse
You might need to put the file in the C: drive of your windows box. At least that's what a another forum post found from a Google search suggested.
Or try linux Check here for more info: http://forum.xda-developers.com/showthread.php?t=804088. It's an old version of Ubuntu and there are somethings I want to add to it, I'll be updating it as soon as I have some free time to put it together using the 10.10 version.
I found this link... http://androidforums.com/droid-all-...-failed-flashing-process-0x7100-rsd-lite.html check out post #32
It does make a difference where the file is located yes and I got the sbf to perform the flash but after a lengthy process looks like about 3 steps and it takes 3-5 min I end up with a fail messege. There is more info I could provide but its been a long Monday I need to give it a break and now the batt is low again.
Thank you all again for your much appreciated help. I will regroup tomorrow. I will try to log in on my phone to see any ideas I mite need to think over.
hello every one ..
actually i have a big problem in my defy plus ....that is i am not able to root it from the day i swaped this
Blur_Version.45.0.2310.MB526.AsiaRetail.en.03 (2012/01/12)
reffered from this
http://forum.xda-developers.com/showthread.php?t=1495099
i ll now request u guys to please listen carefully and help me out
so the starting of the destruction of my defy plus was when i saw this on youtube
http://www.youtube.com/watch?v=3v9O...Kk&annotation_id=annotation_424204&feature=iv
i saw the video and like everyone else tried to upgrade my phone to ics... (this is the point where i would like to kill myself for doing that)
but unfortunately i encountered an error
bootloader
09.10
Err:A5,70,00,00,23
Battery OK
OK to program
Connect USB
Data cable
at that point i thought i was done and didnt knew much about the rdslite and bootloader and all that stuff...i was gone crazy and tried to search a solution on google and found out that it was the sbf that was damaged so in a hurry i read this
http://forum.xda-developers.com/showthread.php?t=1216982
and found an SBF and switched it using RSDlite but to my surprise i flashed a chinese sbf from here
http://sbf.droid-developers.org/umts_jordanplus/list.php
...not knowing much about SBF i tried a lot to find an Asia pacific SBF for my defy and i (not knowing much about it ) flashed
Blur_Version.45.0.2310.MB526.AsiaRetail.en.03 (2012/01/12)
when the process was complete i was so happy that i fixed my defy but i actually made it worse
now i was not able to root not able to install bootmenu or any thing else this all has happened just last weekend
first i accepted it and thought its better this way
but after some time i realized my mistake and now i posted it on this sit
plzz help me find a suitable SBF because previosly i tried some
like this
http://forum.xda-developers.com/showthread.php?t=1375701
and the result was that my phone wasn't switching on it sowed a white led light
it was the same result in the second one so i switched back to
Blur_Version.45.0.2310.MB526.AsiaRetail.en.03
Please guys tell me which sbf should i use or what shoud i do ??? .....if my dad figures out about it ill definitely get scolded very bad...... please help i also know that there would be thousands of other users out there who might get help from this question ,,,
SO PLEASE HELPP ME
All the best friend
http://forum.xda-developers.com/forumdisplay.php?f=855 THIS LINK FOR DOWNLOAD THIS sBF.
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage ,u flashed this sbf
Then root with SuperOneClickv2.3.3-Short Fuse.
STEP for ROOT MOTOROLA DEFY PLUS.
1.GO TO SETTINGS
2. In Application go to development
3.Enable the USB debugging
4.Install superuser ,Then Run SuperOneClickv2.3.3-Short Fuse Run AS administration .then click root process is going ,its asked if u want to test the root just say no ,then reboot the the phone then
5.Install 2ndInit Recovery Installer v2.3
http://forum.xda-developers.com/sho...snugly.euroskank.com/skankwich/?id=jordanplus)
ela1103 said:
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage ,u flashed this sbf
Then root with SuperOneClickv2.3.3-Short Fuse.
Click to expand...
Click to collapse
Really??? Root a BL7 sbf with SuperOneClick? I'd pay to see this!
@trusharbhan
Here is a thread about rooting a BL7 ROM
plzz help again ....
ela1103 said:
http://forum.xda-developers.com/forumdisplay.php?f=855 THIS LINK FOR DOWNLOAD THIS sBF.
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage ,u flashed this sbf
Then root with SuperOneClickv2.3.3-Short Fuse.
STEP for ROOT MOTOROLA DEFY PLUS.
1.GO TO SETTINGS
2. In Application go to development
3.Enable the USB debugging
4.Install superuser ,Then Run SuperOneClickv2.3.3-Short Fuse Run AS administration .then click root process is going ,its asked if u want to test the root just say no ,then reboot the the phone then
5.Install 2ndInit Recovery Installer v2.3
http://forum.xda-developers.com/sho...snugly.euroskank.com/skankwich/?id=jordanplus)
Click to expand...
Click to collapse
i did swaped the rom and now i got blank screen .... my phone is not opening what to do??? its stuck it would not open even after the process said PASS ..
.i when connected it with usb it showed a white light and also my phone i heating up incredibly .......plzzz tell if the process is PASS then why wont it open??? how to get it back to work again.....
Auris 1.6 vvt-i said:
Really??? Root a BL7 sbf with SuperOneClick? I'd pay to see this!
@trusharbhan
Here is a thread about rooting a BL7 ROM
Click to expand...
Click to collapse
hey man i read your thread and i think itll be helpfull but only when i get the right sbf please read my other reply to @ ela1103 and help me if u know how to correct it
OK, calm down and describe EXACTLY what have you downloaded and how have you flashed it.
Yes Iam using this sbf in my motorola defy plus
Auris 1.6 vvt-i said:
Really??? Root a BL7 sbf with SuperOneClick? I'd pay to see this!
@trusharbhan
Here is a thread about rooting a BL7 ROM
Click to expand...
Click to collapse
Yes Iam using this sbf in my motorola defy plus .i root with SuperOneClickv2.3.3-Short Fuse.now iam using cm9 kangs by FuZZ_ Ok
this is what i did
Auris 1.6 vvt-i said:
OK, calm down and describe EXACTLY what have you downloaded and how have you flashed it.
Click to expand...
Click to collapse
actually i downloaded 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage from here
http://forum.xda-developers.com/showthread.php?t=1386942
then i switched off my defy and did as it says here
http://forum.xda-developers.com/showthread.php?t=1618718
(just that i used the sbf mentioned above not from the link given in this thread)
so when the rsdlite finished it said rebooting but it didnt reboot (just power went off) and then rsdlite said PASS
after that i thought that the process is compleate and removed device from usb but it didnt open(blank screen) and
so i tried to open it connecting usb and it didnt open but showed connected in rsdlite and my device showed white led light
since it was heating up i removed the usb and battery from my device and started posting in xda
and that should be all that i did in past 1hour....
it work for you .
tusharbhan said:
hey man i read your thread and i think itll be helpfull but only when i get the right sbf please read my other reply to @ ela1103 and help me if u know how to correct it
Click to expand...
Click to collapse
Now YOU Go to the Motorola recovery mode ,First press the power button at the same time press volume down button .now you enter motorola recovery mode,fist wipe data factory rest and wipe cache partition.
Then enter into bootloader mode.then flash this 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage. then phone boot up. use this method
http://sbf.droid-developers.org/umts_jordanplus/list.php THIS LINK FOR DOWNLOAD THIS sBF.
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf.gz.use this sbf . ITS is in 6 the one sbf .iam using this sbf only in my defy plus , its must work for u r defy plus
..
ela1103 said:
Now YOU Go to the Motorola recovery mode ,First press the power button at the same time press volume down button .now you enter motorola recovery mode,fist wipe data factory rest and wipe cache partition.
Then enter into bootloader mode.then flash this 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage. then phone boot up. use this method
http://forum.xda-developers.com/forumdisplay.php?f=855 THIS LINK FOR DOWNLOAD THIS sBF.
4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage.use this sbf . its must work for u r defy plus
Click to expand...
Click to collapse
ok so for that i think i have to flash the previous one back
because i did that and now it worked ill try ur method
same old result...
ela1103 said:
Now YOU Go to the Motorola recovery mode ,First press the power button at the same time press volume down button .now you enter motorola recovery mode,fist wipe data factory rest and wipe cache partition.
Then enter into bootloader mode.then flash this 4.5.1-134-DFP-1321 - retail-asia full Blur multilanguage. then phone boot up. use this method
http://sbf.droid-developers.org/umts_jordanplus/list.php THIS LINK FOR DOWNLOAD THIS sBF.
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS03C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf.gz.use this sbf . ITS is in 6 the one sbf .iam using this sbf only in my defy plus , its must work for u r defy plus
Click to expand...
Click to collapse
i did what u said and again ended up being with black screen ... the phone dosent powers on and the white led light is seen when plugged to usb.......
what to do help...
Use this rsd lite 4.9
Use this rsd lite 4.9
use this sbf
Asia Retail
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS0 3C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf. gz
DOWNLOAD(http://forum.xda-developers.com/showthread.php?t=1421526)
where will you buy this Motorola defy plus .r u from India
i was doing that only...
ela1103 said:
Use this rsd lite 4.9
use this sbf
Asia Retail
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS0 3C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf. gz
DOWNLOAD(http://forum.xda-developers.com/showthread.php?t=1421526)
Click to expand...
Click to collapse
i am using rsdlite 4.9 and i used
DEFYPLUS_U3_4.5.1-134_DFP-1321_CN_SIGN_SIGNED_UCADEFYEMARAB1B50AA009.0R_PDS0 3C_USAJRDNGIBRIRD15_P014_A026_HWp3_Service1FF.sbf. gz
but still the same .....black screen
can we talk in gtalk or chat
well yea
ela1103 said:
can we talk in gtalk or chat
Click to expand...
Click to collapse
sure thing mate ill give u my id its [email protected]
your defy is back
and, what was the solution? I am having the same problem.
@ tushar - is your defy working ?
same problem
yeah.. I got the same problem too, wait for the solution..
Hi i got this phone second hand and it was working then i updated the firmware from 2.1 to 2.2 on my defy and now i cant make or receive calls there is a red + sign where the bar goes it's locked on t mobile and they cant seem to help as its all ok on there side they have also checked to see if the phone is barred/blocked or blacklisted and it's not. Although i can get internet on it but that's all .
PLEASE HELP!!!!
Hiya, can u tell us how u updated the firmware to 2.2...
Sent from my MB525 using XDA
Hi i think i installed it through the motorola software/update?? when i plugged in the usb & phone it installed the motorola drivers then said there is an update for the phone
saffa1 said:
Hi i got this phone second hand and it was working then i updated the firmware from 2.1 to 2.2 on my defy and now i cant make or receive calls there is a red + sign where the bar goes it's locked on t mobile and they cant seem to help as its all ok on there side they have also checked to see if the phone is barred/blocked or blacklisted and it's not. Although i can get internet on it but that's all .
PLEASE HELP!!!!
Click to expand...
Click to collapse
Bad update, flash a froyo sbf from here: http://forum.xda-developers.com/showthread.php?t=966537
I recommend you stay on froyo so you can install CM7 too
If this doesn't fix it (make sure its right sbf for your type of defy) Then its probably a radio fault that needs repair, but as it worked before it should be fine, its just a bad update, hope this helps
Sent from the real world by hacking into the matrix
thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff
saffa1 said:
thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff
Click to expand...
Click to collapse
That's strange I never got any Spanish instructions :O try the latest version from the thread I provided, and read this noob guide http://forum.xda-developers.com/showthread.php?t=1216982 Thanks to these two threads I did what I thought was impossible, flashed froyo and then CM7 on the same day, its not as hard as it seems just follow steps carefully and its easy! Any more questions feel free to ask, you don't need to send your phone learn it yourself its worth it
Sent from the real world by hacking into the matrix
Thanks i have just tried again with 5.6 lite when i try and open it it just pops up a screen repair or reinstall that's all i am getting and the same for the sbf file ( i am using bitzipper to open it )
saffa1 said:
Thanks i have just tried again with 5.6 lite when i try and open it it just pops up a screen repair or reinstall that's all i am getting and the same for the sbf file ( i am using bitzipper to open it )
Click to expand...
Click to collapse
Can you explain this in detail so I can try and help you?
Sent from the real world by hacking into the matrix
Questions go in the Q&A section
saffa1 said:
thanks how do i open rsd lite4.9 as i have installed it but when i open it it gives me two options for internet short cuts in (Spanish)??
Or how about i send the phone to one of you and you can do it for me i don't mind paying???
Sorry but i am very thick when it comes to this stuff
Click to expand...
Click to collapse
So, your phone is simlocked and when you flashed a different SBF, you have deleted the files that have (probably) previously been installed to unlock it. There are some custom ROM's out there that can simunlock Defy (one of them is MS2Ginger4.0). If you don't know what you're doing and can not handle it yourself, I could flash a custom, simunlocking ROM for you if you don't mind shipping it to Bulgaria and back (I assume you are in the UK).
P.S. There is also a chance that your sim card slot is busted and it can't read the SIM card.
am from uk i can explain or help u over the phone
ibtihaaz said:
am from uk i can explain or help u over the phone
Click to expand...
Click to collapse
I'm not good over the phone, plus my mic is a bit screwed, I'll try write a simple noob guide one day I'm free
Sent from the real world by hacking into the matrix
Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz
If you flashed a froyo SBF last, you must flash at this time also a froyo SBF.
The Flash of an eclair SBF will end in a black screen, cause froyo SBF are CG4 (Bootloader 4) and eclair SBF are CG3 (Bootloader 3).
The Bootloader must be equal or higher then the last SBF you flashed.
Try this SBF:
http://sbf.droid-developers.org/umt...RYOTMGB_P023_A011_M003_HWp3_Service1FF.sbf.gz
its the tmobile froyo SBF Britain.
saffa1 said:
Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz
Click to expand...
Click to collapse
You WHAT!? Are you sure it didn't just go flat after flashing? My defy can be quite stubborn to boot if it goes dead, general rule is if rsdlite can still recognise it flashing it again should sort it out
Sent from the real world by hacking into the matrix
There's a few things you can try here, don't bin it its almost impossible to brick a defy completely: http://forum.xda-developers.com/showthread.php?t=978140
Sent from the real world by hacking into the matrix
All i have is a black screen with white led and that's only if i plug it in the usb
saffa1 said:
Well i followed the tutorials and tried to install the sbf software and RSD lite said all ok (finished) now i cant switch the phone on :crying: nothing happens now if i reconnect it via usb nothing/nill/nada!!.....It's a pity as i did quite like the phone but i think its time to toss it into the bin
This is the SBF file i installed JRDNEM_U3_2.21.0_SIGNED_UCAJRDNEMARAB1B80AA028.0R_USAJORDANRTGB_P026_A007_HWp3_Service1FF.sbf.gz
Click to expand...
Click to collapse
Like the others said, don't bin it, it ain't dead! You just flashed a lower CGXX.smg version ROM, which ends in a black screen. Press and hold Vol+ and then Pwr button, till you get into Bootloader mode, then connect it to RSD Lite and flash CEE Froyo (JRDNEM_U3_3.4.2_179-002_DEBLUR_)
If you have TeamViewer and a webcam (as I need to see what's going on on the phone, not just on the PC), I could try to help from a distance
This guy is the best, listen to him he helped me improve my mic problem
Sent from the real world by hacking into the matrix
Auris 1.6 vvt-i said:
Like the others said, don't bin it, it ain't dead! You just flashed a lower CGXX.smg version ROM, which ends in a black screen. Press and hold Vol+ and then Pwr button, till you get into Bootloader mode, then connect it to RSD Lite and flash CEE Froyo (JRDNEM_U3_3.4.2_179-002_DEBLUR_)
If you have TeamViewer and a webcam (as I need to see what's going on on the phone, not just on the PC), I could try to help from a distance
Click to expand...
Click to collapse
Hi i cant get it into boot-loader i have tried but its just dead
i can get teamviewer but i dont have a web cam
Hi
I had to flash my Motorola Defy to Official 2.2.2 Froyo Android, but during flashing appeared - error veryfying Code Group 32 checksum
I had 2.1 android before so I dunno why this error appeared.
I tried install another sbf's, usb drivers, install from another usb cabel and PC.
Everytime I got this same error.
I even tried install those sbf's from Linux CD (Knopixx) but this didnt work too.
If u have any idea's please help ;<
Ps. sorry for my poor english.
shockwave7 said:
Hi
I had to flash my Motorola Defy to Official 2.2.2 Froyo Android, but during flashing appeared - error veryfying Code Group 32 checksum
I had 2.1 android before so I dunno why this error appeared.
I tried install another sbf's, usb drivers, install from another usb cabel and PC.
Everytime I got this same error.
I even tried install those sbf's from Linux CD (Knopixx) but this didnt work too.
If u have any idea's please help ;<
Ps. sorry for my poor english.
Click to expand...
Click to collapse
Maybe the sbf's got damaged during download. Or the sbf's itself are broken. Try to redownload or use other sbf's.
Don't worry, as long as the bootloader's still working, your phone is most likely not yet bricked
Happen to me today so here is the sbf that I used:
http://www.mediafire.com/?vbcv0lhopulntx8
after that I installed 2nd and CMW and flashed CM9+++
yodawg said:
Maybe the sbf's got damaged during download. Or the sbf's itself are broken. Try to redownload or use other sbf's.
Don't worry, as long as the bootloader's still working, your phone is most likely not yet bricked
Click to expand...
Click to collapse
I downloaded maybe 5 same sbf and still this error appear.
Downloaded 15 another sbf's and nothing worked ;/
x-Moi-x said:
Happen to me today so here is the sbf that I used:
after that I installed 2nd and CMW and flashed CM9+++
Click to expand...
Click to collapse
I tried flash this sbf but again same Error veryfying code group 32 checksum...
Are you using the latest version of RSD Lite again(I did it with v5.6) and the latest version of the drivers.
x-Moi-x said:
Are you using the latest version of RSD Lite again(I did it with v5.6) and the latest version of the drivers.
Click to expand...
Click to collapse
I'm using RSD Lite 5.7 and new drivers and this file didn't want to flash ;/
Anyone have any other idea? ;/
Can anyone help me?
I'm losing hope ;/
shockwave7 said:
Can anyone help me?
I'm losing hope ;/
Click to expand...
Click to collapse
Do you still have warranty? Red or Green Lens? Any modifications made?
I could only repeat: Search for different sbf's and try them. Maybe reflash the kernel before that if it doesn't work.
yodawg said:
Do you still have warranty? Red or Green Lens? Any modifications made?
I could only repeat: Search for different sbf's and try them. Maybe reflash the kernel before that if it doesn't work.
Click to expand...
Click to collapse
Have red lens and I still have warranty.
I tried with so many sbf and any wont to work.
What do u mean: reflash kernel?
shockwave7 said:
Have red lens and I still have warranty.
I tried with so many sbf and any wont to work.
What do u mean: reflash kernel?
Click to expand...
Click to collapse
Hmm if you only did "official things" like trying to flash official firmware without any modifications then why not claim your warranty and send your phone to customer service?
@shockwave
Have you tried, to shorten the name of the sbf-file, in ABC.SBF.
Also you should put the shorten SBF in the program directory of rsdlite.
It sounds to me, that the string of the SBF is too long, so rsdlite creates errors while depacking the sbf for flashing.
yodawg said:
Hmm if you only did "official things" like trying to flash official firmware without any modifications then why not claim your warranty and send your phone to customer service?
Click to expand...
Click to collapse
I think I will do do that, but I wanted do it faster. On warranty I need to wait many time ;/
Do you flashed a defy plus sbf? I think that you upgrade your BL to 6 or 7. That's why when you put froyo it doesn't start
jmms94 said:
Do you flashed a defy plus sbf? I think that you upgrade your BL to 6 or 7. That's why when you put froyo it doesn't start
Click to expand...
Click to collapse
Nope, I will find some defy+ sbf I try to flash it.
shockwave7 said:
Nope, I will find some defy+ sbf I try to flash it.
Click to expand...
Click to collapse
I think you misunderstood jmms94. I think he thought you had already flashed a Defy+ build accidentially and that this would be the cause for your error!
yodawg said:
I think you misunderstood jmms94. I think he thought you had already flashed a Defy+ build accidentially and that this would be the cause for your error!
Click to expand...
Click to collapse
I tried install 2.2.2 Froyo for normal Defy not Defy+ at first time. I dont have any idea what i cant do more. I will try reinstall my RDS Lite and Drivers, again...
RATTAR said:
@shockwave
Have you tried, to shorten the name of the sbf-file, in ABC.SBF.
Also you should put the shorten SBF in the program directory of rsdlite.
It sounds to me, that the string of the SBF is too long, so rsdlite creates errors while depacking the sbf for flashing.
Click to expand...
Click to collapse
Have you already tried this??
yodawg said:
Have you already tried this??
Click to expand...
Click to collapse
Yep, same error... ;(
Did you repeat after trying hard reset?
Sent from my MB525 using xda app-developers app
Shafirul said:
Did you repeat after trying hard reset?
Click to expand...
Click to collapse
What is a "hard reset"?
Hi,today I have flashed original Motorola .sbf ,I downloaded it from here. It is 3.4.2_179-002, Retail Central Europe version. Now,after flashing it with RSD Lite the phone does not boot. There is no even Motorola logo at the start,nothing,its dead. How can I start the phone with this original .sbf? I want to have original froyo on the phone,and I know how to get back to CM10 but im not interesting in that now.
Thanks.
markos807 said:
Hi,today I have flashed original Motorola .sbf ,I downloaded it . . .... I know how to get back to CM10 but im not interesting in that now.
Thanks.
Click to expand...
Click to collapse
markos807, did the SBF flashing process complete successfully and did u get the message "Please manually reboot phone" in RDSLite window?
Did u verify the MD5sum of the downloaded SBF against the MD5sum given in the download page to check if the downloaded SBF file is not corrupted?
Are u still able to go to the Bootloader by pressing VOL UP+POWER button when the phone is switched off?
Only if u provide the above information, I can suggest what can be done next.
1.I dont remember what was the message,but I think it wasnt "Please manually reboot phone",but it was done,some other message saying its done
2.How to do that?
3.I cannot go into bootloader and when I connect a phone via usb to the PC the RSD Lite recognizes it so I can flash some other verified sbf.
Thanks for trying
markos807 said:
1.I dont remember what was the message,but I think it wasnt "Please manually reboot phone",but it was done,some other message saying its done
2.How to do that?
3.I cannot go into bootloader and when I connect a phone via usb to the PC the RSD Lite recognizes it so I can flash some other verified sbf.
Thanks for trying
Click to expand...
Click to collapse
Might I suggest, pull your Defy battery, replace it, do not attempt to get into bootloader, Leave it off. Just plug it in with usb after booting up RSD lite and see if connects on it's own. Sounds like a bad flash. I've connected that way numerous times.
markos807 said:
1.I dont remember what was the message,but I think it wasnt "Please manually reboot phone",but it was done,some other message saying its done
2.How to do that?
3.I cannot go into bootloader and when I connect a phone via usb to the PC the RSD Lite recognizes it so I can flash some other verified sbf.
Thanks for trying
Click to expand...
Click to collapse
1. Even I dont remember the exact message But I remember that it asks us to reboot the phone manually.
2. If the SBF which u are using is corrupted while downloading, it may lead to bad flash. U can google and download and use any of the md5sum checking tools. I use winmd5 application(I'm using Windows in my laptop), which is easy to use and it has UI unlike some other md5sum tools which have to be run through command line.
3. If RSD Lite recognizes ur phone, then try flashing the SBF once again. But ensure that the SBF is not corrupted as mentioned in point 2. If ur SBF is corrupted, try downloading it again. There are chances for a file to get corrupted while downloading. That is the reason why md5sum is mentioned in the download page to verify the file after download.
Winmd5 app says "Matched!". That means it is good?
Yes, if the MD5sum matches it means that the SBF file is not corrupted. U try flashing the same SBF again and see if it works.
@ markos807: Were u able to flash SBF successfully? I would like to know if ur defy is working fine now
Gingerbread (BL7) back to Froyo?
Did you already flash a Defy+ ROM with Gingerbread?
From a BL7 ROM there is no way back to Froyo. BL7 doesn't support that.
When I wanted to go back to froyo, I was flashing this sbf: JDGC_U6_2.13.0 China Unicom Thread/Download !!!BL6 kernel !!!
And that broke my flashlight! And because of that I want to go back to other official froyo sbf to see will the flashlight work. Do you know any other fix for the flashlight? Anything please?
Also, I am flashing same sbf second time now, will post the results.
Edit: Cannot boot the phone with any .sbf downloaded from here. The only .sbf that I can flash and boot the phone is JDGC_U6_2.13.0 China Unicom and that one broke my flashlight.
markos807 said:
When I wanted to go back to froyo, I was flashing this sbf: JDGC_U6_2.13.0 China Unicom Thread/Download !!!BL6 kernel !!!
And that broke my flashlight! And because of that I want to go back to other official froyo sbf to see will the flashlight work. Do you know any other fix for the flashlight? Anything please?
Also, I am flashing same sbf second time now, will post the results.
Edit: Cannot boot the phone with any .sbf downloaded from here. The only .sbf that I can flash and boot the phone is JDGC_U6_2.13.0 China Unicom and that one broke my flashlight.
Click to expand...
Click to collapse
Mate, as you flashed BL6 sbf then you are stuck with BL6 and no way back to froyo other than chinese one.
Your flashlight could be burnt out - in such a case only moto service can help
What do you mean you cannot boot with any sbf from walter79 thread? Have you tried all of them? (You shouldn't). Or only froyo ones?
If you tried only froyos, then you can flash gingerbread BL6 to check your flashlight
And have you tried wiping data and cache from stock recovery? Is it accessible with power + volume down?
No, I cannot acess stock recovery. I have tried only froyo ones. Can you give me the link for that BL6 GB, I`ll flash it tomorrow because I really want to fix my flashlight.
markos807 said:
No, I cannot acess stock recovery. I have tried only froyo ones. Can you give me the link for that BL6 GB, I`ll flash it tomorrow because I really want to fix my flashlight.
Click to expand...
Click to collapse
Try any from a range 4.5.1-134_DFP-125 up to DFP-161. Higher are usually BL7, lower are BL5, so no use to flash
Link to the sbfs
I have succesfully boot up a phone with this sbf: DEFYPLUS_U3_4.5.1-134_DFP-125_GR_SIGN.. but my flashlight is still not working. The camera is not working at all.
markos807 said:
I have succesfully boot up a phone with this sbf: DEFYPLUS_U3_4.5.1-134_DFP-125_GR_SIGN.. but my flashlight is still not working. The camera is not working at all.
Click to expand...
Click to collapse
Well, I suppose you've burnt your flash unfortunately with chinese froyo.
Your camera will not work with GB ROMS. It's normal. but it was you who flashed BL6 ROM on your green defy
You have to go to CM10 2ndboot builds to have your camera working again.
For flash I suppoose only moto service can help