all solve here :
1st
need: MTTY
steps
1: Bootloader
2: mtty
3: task 28 55aa (fully format device)
4: rtask 0 (reset radio)
5: Reflash device
Above from wiki XDA dev's
Important, do not try to start device after above, after radio reset, put device back to bootloader directly
If above does not help you need to reflow or reball radio chip (tested and working if above does not work)
And my result from MTTY:
task 32
USB>password BOOTLOADER
HTCSPass.< YHTCEUSB>info 8
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x3340000
All Size: 0x7440000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>info 7
HTC Integrated Re-Flash Utility for bootloader Version:1.50a SABLE EVT version:G.39
MainBoardID = C
Built at: Jun 12 2006 13:46:04
Copyright (c) 1998-2005 High Tech Computer Corporation
Turbo Mode Frequency = 312 MHz
Run Mode Frequency = 208 MHz
Memory Frequency = 208 MHz
SDRAM Frequency = 104 MHz
USB>info 4
HTCS Lњ3ЖHTCE
USB>task 28
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x3340000
All Size: 0x7440000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>task 28 55aa
Wait..
DOCInfoTableinitHW+
Binary0 Size: 0x100000
FAT0 Size: 0x4000000
FAT1 Size: 0x33C0000
All Size: 0x74C0000
FAT0_ADDR=0x100000,FAT1_ADDR=0x4100000
USB>set 14 0
HTCST ЪИТHTCEUSB>set 14 10
HTCSF kEШ(HTCEUSB>set 14 9
HTCSF kEШ(HTCEUSB>
DONT PANYC after NO BOOT-> REFLASH CEOS.nbf (HW6915 ROM FOR G4-121UK) FROM HP Utility.
Info for Pass1:
HTCSPass1.CM€ЛHTCEUSB>password 0000000000000000
source:
http://forum.xda-developers.com/showthread.php?t=471942
final steps
If your Flash chip type is G4, you can use ENG V1.21UK rom to update, I have uploaded the rom to Yahoo.com mail box.
I have changed my 6965 CHT ver to ENG ver successfully.
You can login yahoo mail box by using [email protected] as id and 69656965 as password.
Pls note not to delete the rom as others might need it too.
Flsah method:
1. Sync your mobil with PC by ActiveSync4.5 or up
2. Double click the downloaded update rom programme.
3. Click upgrade button and wait for 8-10 minutes
4. Done.
source
http://forum.xda-developers.com/showthread.php?t=420041
please, don't chage anything. keep data safe for other people
has anyone tried the above instructions and succeeded ? I have a perfectly working 6915, but it's in Spanish and I would like to change the language to English. I'm afraid of bricking the phone or end up with the "No GSM" problem.
DO NOT USE that way.Surely, your phone will become a brick. That will change Product ID with invalid code and you will never restore SW for radio ROM .
Hi guys,
My HD2 was the official HTC for repair because my USB broke
They exchanged the board, now I can not flashing to the CWR for android, even WM7
I did the following:
- HD2 came om SPL 3.3 (I think)
- I put in version 2.08 and did a HSPL task29
- Installed the radio 2.15.50.14
- And installed MAGLDR 1:13
So far so good
Now go to "usb flash" and run the DAF.exe but after me the following error:
"An error has ocurred
Read below for more information
Error Description: Partition data send failed:
Info: \ RSPL \ RSPL.cpp (815)
Error Description: Flash Write Failed.
Info: \ RSPL \ RSPL.cpp (599) "
And at mobile phone shows me
"Layout ... PC = 6, ASI = 5, 5 = OASI
Erease ...
0: Total = 8, extra = 2
k = 21 -> 21 221 241, 1000
1: part = 33, part2 = 33
k = 28 -> 28 242 269, 1000
2: part1 = 40, part2 = 40
3: total = 1600, Extra = 80
4: total = 40, extra = 2
[ASIZE] START: 8D2 END: F40 SIZE: 66E
PARITITON NEW LAYOUT
0: 0219 0221 50 01
1: 0221 0242 62 0D
2: 0242 026A 61 09
3: 026A 08AA 50 01
4: 08AA 08D2 50 01
5: 08D2 0F40 50 51
Erease ...
D S: 0 E: 219
D S: 1 E: 221
D S: 2 E: 242
D S: 3 E: 26A
D S: 4 E: 8AA
D S: 5 E: 8D2
Save EMBR
Default OS is Ad NAND...
Empty 0 Partition ... OK
Flashing 1 Partition...1 [221-242] M0 "
And stops with the white bar below + / - 10%
what's happens with my phone??
inside the file 'flash.cfg' (can open with notepad) what does it say?
Ok i found the solution and calls Windows Mobile Center... after install that i can do all stuf...
Here is the long version.
My phone a U8800 Pro was running the official B928 version downloaded from Huawei
I wanted to install the latest version Cyanogen 11. That needed me to install the latest version of TWRP which led me to the mistake that I needed to update the bootloader as well.
And then I did another mistake where I installed what is obviously the wrong bootloader from here (http://forum.xda-developers.com/showthread.php?t=1800045) using
Code:
dd if=/tmp/bootloader.bin of=/dev/block/mmcblk0p3
The phone since then just boot cycles continously and cannot even login to recovery mode.
I attempted to re-install B928 from the SD card but always fails at about 1/4 of the way through with a
Code:
dload_sd_ram_data_proc->(retry >= DLOAD_RETRY) failed!
msg.
Now interestingly if I remove the battery and just use the USB I get an empty pink screen and I can see at least the partitions of the internal drive
Code:
Disk /dev/sdg: 3.7 GiB, 3959422976 bytes, 7733248 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sdg1 1 524287 262143+ c W95 FAT32 (LBA)
/dev/sdg2 * 524288 525287 500 4d QNX4.x
/dev/sdg3 525288 531287 3000 46 Unknown
/dev/sdg4 531288 7733247 3600980 5 Extended
/dev/sdg5 655360 679935 12288 59 Unknown
/dev/sdg6 786432 1052671 133120 4c Unknown
/dev/sdg7 1179648 1183743 2048 5a Unknown
/dev/sdg8 1310720 1316863 3072 58 Unknown
/dev/sdg9 1441792 1455791 7000 50 OnTrack DM
/dev/sdg10 1572864 1579007 3072 4a Unknown
/dev/sdg11 1703936 1710079 3072 4b Unknown
/dev/sdg12 1835008 2621439 393216 83 Linux
/dev/sdg13 2621440 4456447 917504 83 Linux
/dev/sdg14 4456448 7733247 1638400 69 Unknown
and can mount some of them.
Now where can I find an appropriate bootloader and which partition should I attempt to copy it on .
And secondly if that works out, how do I install TWRP 2.8.0.0 . Using TWRP manager fails which led to this whole mess really.
On /dev/sdg1 I can see a dir called image and it contains
Code:
amss.mbn boot.img cust.img EMMCBOOT.MBN recovery.img
but don't want to touch anything before I know more since I can do more dmg.
Thanks for all the help in advance
Edit: I managed to copy the bootloader from a friend and copy it back on my phone so that problem was solved. It needed to go to the /dev/sdg3 partition if anyone is wandering. Now pink screen seems locked and can't access the internal storage through USB so back to square 1.
Glad you got the problem solved out. When you unlock your bootloader (like I said in here), boot your phone to pink screen and plug it to your computer. You're using linux? If so, there probably is going to be four difference device's to be shown, the one which you're interested is the device containing "image" folder, in there replace the recovery.img with appropriate one.
DELETED
but there is some aosp build usable ( incall micro working on fine ) for galaxy s 6?
thanks for the guide Master
supera3 said:
but there is some aosp build usable ( incall micro working on fine ) for galaxy s 6?
thanks for the guide Master
Click to expand...
Click to collapse
Depend on what source zero-common, zerofltexx and kernel are based.
Very cool guide, I'll have to give this a shot later just for fun! Sorry for doubting you before.
If there are new commits, before ". build/envsetup.sh" tipe "repo sync" for upgrade.
Hi @Astrubale,
I tried to build cm-13.0 with your tutorial, but build fails non-stop on:
Code:
target SharedLib: libexpat (/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so)
/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/lib/xmlparse.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
build/core/shared_library_internal.mk:80: recipe for target '/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so' failed
make: *** [/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so] Error 1
make: *** Waiting for unfinished jobs....
make[3]: Nothing to be done for 'dtbs'.
or
Code:
/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/android_compat_hacks.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
build/core/shared_library_internal.mk:80: recipe for target '/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/LINKED/libcrypto.so' failed
make: *** [/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/LINKED/libcrypto.so] Error 1
make: *** Waiting for unfinished jobs....
make: Leaving directory '/home/sebek/android/system'
The solution is to remove xmlparse.o or android_compat_hacks.o and I guess it continues the build. Almost at the end of compilation (I presume) it throws out that very error and after a while I get:
Code:
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '/lib/firmware/abov/abov_valley.fw' given more than once in the same rule
make[1]: Leaving directory '/home/sebek/android/system/kernel/samsung/exynos7420'
make[1]: Entering directory '/home/sebek/android/system/kernel/samsung/exynos7420'
INSTALL net/ipv4/tcp_htcp.ko
INSTALL net/ipv4/tcp_westwood.ko
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '../../system/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '../../system/lib/firmware/abov/abov_valley.fw' given more than once in the same rule
DEPMOD 3.10.61
make[1]: Leaving directory '/home/sebek/android/system/kernel/samsung/exynos7420'
make: Leaving directory '/home/sebek/android/system'
#### make failed to build some targets (26:29 (mm:ss)) ####
Maybe you'd be willing to give me some advice on how I could finish this build ? I am building on Ubuntu 16.04, dl'd the newest kernel from Brandon's git repo.
My best
djseban2 said:
Hi @Astrubale,
I tried to build cm-13.0 with your tutorial, but build fails non-stop on:
Code:
target SharedLib: libexpat (/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so)
/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/lib/xmlparse.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
build/core/shared_library_internal.mk:80: recipe for target '/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so' failed
make: *** [/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so] Error 1
make: *** Waiting for unfinished jobs....
make[3]: Nothing to be done for 'dtbs'.
or
Code:
/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/android_compat_hacks.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
build/core/shared_library_internal.mk:80: recipe for target '/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/LINKED/libcrypto.so' failed
make: *** [/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/LINKED/libcrypto.so] Error 1
make: *** Waiting for unfinished jobs....
make: Leaving directory '/home/sebek/android/system'
The solution is to remove xmlparse.o or android_compat_hacks.o and I guess it continues the build. Almost at the end of compilation (I presume) it throws out that very error and after a while I get:
Code:
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '/lib/firmware/abov/abov_valley.fw' given more than once in the same rule
make[1]: Leaving directory '/home/sebek/android/system/kernel/samsung/exynos7420'
make[1]: Entering directory '/home/sebek/android/system/kernel/samsung/exynos7420'
INSTALL net/ipv4/tcp_htcp.ko
INSTALL net/ipv4/tcp_westwood.ko
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '../../system/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '../../system/lib/firmware/abov/abov_valley.fw' given more than once in the same rule
DEPMOD 3.10.61
make[1]: Leaving directory '/home/sebek/android/system/kernel/samsung/exynos7420'
make: Leaving directory '/home/sebek/android/system'
#### make failed to build some targets (26:29 (mm:ss)) ####
Maybe you'd be willing to give me some advice on how I could finish this build ? I am building on Ubuntu 16.04, dl'd the newest kernel from Brandon's git repo.
My best
Click to expand...
Click to collapse
Can you send me a screen of /android/system/kernel/samsung/exynos7420/ ?
Astrubale said:
Can you send me a screen of /android/system/kernel/samsung/exynos7420/ ?
Click to expand...
Click to collapse
Sure, it looks like this:
hxxp://imgur.com/M5sAjIo
@edit: I deleted exynos7420 dir and unzipped it (dl'd zip from github) once again, this time through Terminal. Turned out it was something wrong with that, therefore I succeded with building the ROM, but my S6 hangs on "Kernel is not seandroid enforcing", after flashing the ROM (tough luck, I guess). What's more I tried flahyboy's ROM, to see if it's maybe something wrong with my S6 - well, you can say flahyboy's ROM starts instantly, but in-call mic is not working. I'd be grateful for any hints on what might be wrong. One and only thing I noticed is flahyboy's ROM is slightly greater in size (~40MB) that mine.. maybe the build solution did not add something to my zip.. Anyway - great tutorial, thanks for that. Installing AOSP just made me even more anxious to wait for making this system stable :good:
djseban2 said:
Sure, it looks like this:
hxxp://imgur.com/M5sAjIo
@edit: I deleted exynos7420 dir and unzipped it (dl'd zip from github) once again, this time through Terminal. Turned out it was something wrong with that, therefore I succeded with building the ROM, but my S6 hangs on "Kernel is not seandroid enforcing", after flashing the ROM (tough luck, I guess). What's more I tried flahyboy's ROM, to see if it's maybe something wrong with my S6 - well, you can say flahyboy's ROM starts instantly, but in-call mic is not working. I'd be grateful for any hints on what might be wrong. One and only thing I noticed is flahyboy's ROM is slightly greater in size (~40MB) that mine.. maybe the build solution did not add something to my zip.. Anyway - great tutorial, thanks for that. Installing AOSP just made me even more anxious to wait for making this system stable :good:
Click to expand...
Click to collapse
Thank, but can you compile now?
Astrubale said:
Thank, but can you compile now?
Click to expand...
Click to collapse
Yeah, I compiled it at last, but if i flash the zip from out folder, then the phone hangs on first bootsplash ("Galaxy S6") with "Kernel is not seandroid enforcing"
djseban2 said:
Yeah, I compiled it at last, but if i flash the zip from out folder, then the phone hangs on first bootsplash ("Galaxy S6") with "Kernel is not seandroid enforcing"
Click to expand...
Click to collapse
Search for errors inside /proc/last_kmsg
Wow cool clean and easy Guide. Thanks for this.
Weil try myself on that.
Astrubale said:
Search for errors inside /proc/last_kmsg
Click to expand...
Click to collapse
Code:
Samsung S-Boot 4.0 for SM-G920F (Apr 22 2016 - 16:59:51)
EXYNOS7420 EVT 1.3 (Base on ARM CortexA53)
3048MB / 0MB / Rev 11 / G920FXXU3DPDP / (PKG_ID 0x0) / LOT_ID N3N1P / RST_STAT (0x10000)
__if_pmic_rev_init - MUIC API is not ready!
MON: 0x8(1)
MON[0] = (1)[0x1c, 0x7a]
MON[1] = (2)[0x1a, 0x56]
MON[2] = (3)[0x1a, 0x3d]
MON[3] = (4)[0x1c, 0x4e]
MON[4] = (5)[0x1a, 0x39]
MON[5] = (6)[0x1a, 0x30]
MON[6] = (7)[0x15, 0x44]
MON[7] = (0)[0x0c, 0x07]
pmic_asv_init
(ASV_TBL_BASE+0x00)[11:0] bigcpu_asv_group = 2184
(ASV_TBL_BASE+0x00)[15:12] bigcpu_ssa0 = 0
(ASV_TBL_BASE+0x00)[27:16] littlecpu_asv_group = 2457
(ASV_TBL_BASE+0x00)[31:28] littlecpu_ssa0 = 0
(ASV_TBL_BASE+0x04)[11:0] g3d_asv_group = 2184
(ASV_TBL_BASE+0x04)[15:12] g3d_ssa0 = 0
(ASV_TBL_BASE+0x04)[27:16] mif_asv_group = 2184
(ASV_TBL_BASE+0x04)[31:28] mif_ssa0 = 0
(ASV_TBL_BASE+0x08)[11:0] int_asv_group = 3276
(ASV_TBL_BASE+0x08)[15:12] int_ssa0 = 6
(ASV_TBL_BASE+0x08)[27:16] cam_disp_asv_group = 2184
(ASV_TBL_BASE+0x08)[31:28] cam_disp_ssa0 = 0
(ASV_TBL_BASE+0x0C)[3:0] dvfs_asv_table_version = 15
(ASV_TBL_BASE+0x0C)[4] asv_group_type = 0
(ASV_TBL_BASE+0x0C)[7:5] reserved01 = 0
(ASV_TBL_BASE+0x0C)[8] shift_type = 0
(ASV_TBL_BASE+0x0C)[9] ssa1_enable = 0
(ASV_TBL_BASE+0x0C)[10] ssa0_enable = 1
(ASV_TBL_BASE+0x0C)[15:11] reserved02 = 0
(ASV_TBL_BASE+0x0C)[16] asv_method = 1
(ASV_TBL_BASE+0x0C)[31:17] reserved03 = 0
(ASV_TBL_BASE+0x10)[3:0] main_asv_group = 0
(ASV_TBL_BASE+0x10)[7:4] main_asv_ssa = 0
(ASV_TBL_BASE+0x10)[11:8] bigcpu_ssa1 = 0
(ASV_TBL_BASE+0x10)[15:12] littlecpu_ssa1 = 0
(ASV_TBL_BASE+0x10)[19:16] g3d_ssa1 = 0
(ASV_TBL_BASE+0x10)[23:20] mif_ssa1 = 0
(ASV_TBL_BASE+0x10)[27:24] int_ssa1 = 0
(ASV_TBL_BASE+0x10)[31:28] cam_disp_ssa1 = 0
(ASV_TBL_BASE+0x14)[8:0] bigcpu_ssa_ema = 0
(ASV_TBL_BASE+0x14)[17:9] littlecpu_ssa_ema = 0
(ASV_TBL_BASE+0x14)[26:18] g3d_ssa_ema = 0
(ASV_TBL_BASE+0x14)[31:27] reserved04 = 0
chip_status = f, bin2_efuse = 0
muic_register_max77843_apis
muic_is_max77843 chip_id:0x43 muic_id:0xb5 -> matched.
MUIC rev = MAX77843(181)
init_multi_microusb_ic Active MUIC 0xb5
max77843_init_microusb_ic: MUIC: CDETCTRL:0x2d
max77843_init_microusb_ic: MUIC: CONTROL1:0x00
max77843_init_microusb_ic: MUIC: CONTROL2:0x3b
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
load Secure Payload done.
Chip ID : 060f4d16dd28 / 0x00007700
EL3 monitor information => Built : 16:48:28, Jan 18 2016
bConfigDescrLock: 1
sw_lock success
sw_lock success
sw_lock success
SCSI CMD : 55 11 00 00 00 00 00 00 14 00
SCSI Response(01) : Target Failure
SCSI Status(02) : max77843_set_muic_uart_early: MUIC: CONTROL1: 0x00
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
[Debug Info.]
S-BOOT : VERSION_-+F0
SecureOS : 20 (MB)
- read_bl1
blk_bread_bootsector: LUN 1, from 0x0, size 0x10, buffer 0x45708000
Verify_Binary_Signature 0x45720120 [email protected], [email protected]
pit_check_signature (PIT) valid.
PARAM ENV VERSION: v1.0..
blk_bread_bootsector: LUN 1, from 0xffe, size 0x1, buffer 0x441204c0
initialize_ddi_data: usable! (3:0xf), warranty reason : (0x0303)
MAGIC_RAM_BASE: 4000000, MAGIC_RAM_BASE2: 100001, ompin: 2000a
[ldfw] Pass LDFW partition!
[ldfw] read whole CM partition from the storage
ldfw: 0th ldfw's version 0x20151027 name : CryptoManagerV20
ldfw: 1th ldfw's version 0x20151203 name : fmp_fw
ldfw: init ldfw(s). whole ldfws size 0x204110
[ldfw] try to init 2 ldfw(s). except 0 ldfw 2 ldfw(s) have been inited done.
[mobi_drv] add: 0x43e71940, size: 11401
MobiCore IDLE flag = 0
MobiCore Driver loaded and RTM IDLE!
[OTP] 27 bit read: 0x5
[OTP] 22 bit read: 0x0
[OTP] 21 bit read: 0x0
[OTP] 23 bit read: 0x1
[OTP] 26 bit read: 0x1
[OTP] NANTIRBK0 bit reading: start
[OTP] NANTIRBK0: 3 bit
[OTP] 28 bit read: 0x1
[OTP] 29 bit read: 0x0
[OTP] 30 bit read: 0x1
[OTP] 25 bit read: 0x1
[OTP] ETC value: 0
[EFUSE] SMC Read the 0x0 ...
[EFUSE] SMC Read Count value: 3
[EFUSE] SMC Read the 0x1 ...
[EFUSE] SMC Read Count value: 1
[EFUSE] SMC Read the 0x2 ...
[EFUSE] SMC Read Count value: 0
[EFUSE] SMC Read the 0x3 ...
[EFUSE] SMC Read Count value: 1
(1,5) vs (1,5)
[EFUSE] This is commercial device.
set_tzpc_secureport: successfully protected 0
eSE Protection!!
Authenticated data read request (Swapped)
Authenticated data read response (Swapped)
RPMB: get hmac value: success
HMAC compare success !!
update_rpmb_version skip.
initialize_secdata_rpmb: usable! (0x52504d42)
DDR SIZE: 3G (0xc0000000)
LPDDR4 manufacturer : Micron
bin2_efuse = 0
[TMU] 52, 53, 51, 51
UFS vendor: SAMSUNG
FW rev : 0200
product : KLUBG4G1BD-E0B1
UFS size (GB) : 32
UFS ID : XXXXXXXXXXXXXXXX
lun:196 Query Response : 0xfc
lun:196 Query Response : 0xfc
lun:196 Query Response : 0xfc
lun:196 Query Response : 0xfc
dNumAllocUnits error at LU7 0 0
PROVISION : FAIL
PROVISION : FAIL
max77843_muic_api_print_init_regs: INTMASK[1:0x00, 2:0x00, 3:0x00]
max77843_muic_api_print_init_regs: MUIC: CDETCTRL:0x2d
max77843_muic_api_print_init_regs: MUIC: CONTROL1:0x00
max77843_muic_api_print_init_regs: MUIC: CONTROL2:0x3b
max77843_muic_api_print_init_regs: MUIC: CONTROL3:0x00
max77843_muic_api_print_init_regs: MUIC: CONTROL4[0x16]:0xb2
init_ific : MAX77843(0)
init_ific : MAX77843(0)
set_float_voltage: max77843 battery cv voltage 0x9c
set_charger_state: buck(1), chg(1), reg(0x05)
max77843_get_charger_status: Invalid charger
set_auto_current: get_charger_status(0)
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
get_wireless_charger_detect: wireless check 0
get_wireless_charger_detect : CHG_DTLS(0x00)
set_auto_current: unknown_state, curr(475)
max77843_get_charger_status: Invalid charger
get_wireless_charger_detect: wireless check 0
get_wireless_charger_detect : CHG_DTLS(0x00)
set_charger_current: chg curr(137), in curr(0)
max77843_get_charger_status: Invalid charger
get_wireless_charger_detect: wireless check 0
get_wireless_charger_detect : CHG_DTLS(0x00)
fuelguage : wpc_status(0)
set_charger_state: buck(1), chg(0), reg(0x04)
init_fuel_gauge: Start!!
init_fuel_gauge : MAX77843(0)
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
adc_read_temp temp_adc = 1852
init_fuel_gauge temp = 25
init_fuel_gauge : MAX77843(0)
init_fuel_gauge: Battery type : SDI, capacity: 5177, status: 128
init_fuel_gauge: Already initialized (0x1439, SDI type)
check_validation_with_tablesoc: Start!!
fuel_gauge_read_soc: SOC(32), data(0x209a)
fuel_gauge_read_ocv: VFOCV(3774), data(0xbcba)
calculate_table_soc : low(0) high(6) mid(7) table_soc(0)
calculate_table_soc : low(4) high(6) mid(3) table_soc(0)
calculate_table_soc : low(6) high(6) mid(5) table_soc(0)
calculate_table_soc : low(7) high(6) mid(6) table_soc(0)
calculate_table_soc: vcell [3774] table_soc [31]
differ(1), table_soc(31), RepSOC(32)
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
fuel_gauge_read_vcell: VCELL(3716), data(0xb9d8)
vcell(3716),soc_diff_limit(50), low_temp_reset(0)
fuel_gauge_read_ocv: VFOCV(3774), data(0xbcba)
fuel_gauge_read_vcell: VCELL(3716), data(0xb9d8)
fuel_gauge_read_soc: SOC(32), data(0x209a)
fuel_gauge_read_vfsoc: VFSOC(30), data(0x1ef3)
init_fuel_gauge : OCV(3774), VCELL(3716), SOC(32), VFSOC(30)
AP_PMIC_SDA = 1
PMIC_ID = 0x12
OTP:0x78 PWR_SEQ:1 G3D_OCP:1 PSoff:1 INT_Volt:1
PMIC_STATUS1 = 0x2f PWRON JIGONB ACOKB MR2B PWRON1S
PMIC_STATUS2 = 0x11 RTC60SE RTC1SE
PMIC_PWRONSRC = 0x08 MRST
PMIC_OFFSRC = 0x00
PMIC_INT1 = 0xc3 PWRONF PWRONR PWRON1S MRB
PMIC_INT2 = 0x11 RTC60S RTC1S
PMIC_INT3 = 0x80 RSVD
PMIC_RTC_CTRL = 0x02
PMIC_RTC_SMPL = 0x83
RTC TIME: 2016-08-13 07:27:29(0x40)AM
s5p_check_keypad: 0x10110000
s5p_check_keypad: recovery mode
set_oneshot_recovery: recovery mode set! sys_bootm=0x80000
s5p_check_reboot_mode: INFORM3 = 0 ... skip
ATLAS_PLL = 1200MHz APOLLO_PLL = 1200MHz MIF_PLL = 3104MHz
MFC_PLL = 468MHz CCI_PLL = 532MHz
BUS0_PLL = 1600MHz BUS1_PLL = 668MHz
board_uart_rustproof ifc_sense: 0
-user build & not FAC
-rustproof mode Enabled
s5p_check_upload: MAGIC(0x4000000), RST_STAT(0x10000)
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
s5p_check_upload: debug level is LO! (mask: 0x220)
max77843_ific_set_mrstb: TOPSYS: MAINCTRL1[0x02]: [0x07]+[0x07]->[0x07]
s5p_check_upload: disable dump_gpr
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
s5p_check_download: 0
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_get_charger_status: Invalid charger
get_wireless_charger_detect: wireless check 0
get_wireless_charger_detect : CHG_DTLS(0x00)
check_pm_status: charger is not detected
fuel_gauge_read_vcell: VCELL(3718), data(0xb9ea)
check_pm_status: voltage(3718) is ok
check_pm_status: 7 sec reset, continue.
scr_draw_image: draw 'logo.jpg'...
read 'logo.jpg'(112504) completed.
board_set_dev_pm: s2mpb02 enable for display
42, 0, 13, 0x420013
DETECTED LCD TYPE : S6E3HA2
mipi-dsi driver(CMD mode) has been probed.
decon-int: ver0, max win7, command mode, hw trigger
single dsi mode
decon0 registered successfully
afw flag is Unknown [afw flag : 00 00 00 00]
secure info base: 45720000 and SMC Num = 0x83000013
secure smc success!!! [ret = 0]
Set debug level to low(4f4c)
DMV: Successfully informed TZ of boot mode: Recovery
load_kernel: loading boot image from 139264..
kernel size = 0x114f000, ramdisk size = 0x5fc000
dt_size:1454080, dt_actual:1454080
Verify_Binary_Signature 0x45720120 [email protected], [email protected]
Kernel Image
Verify_Binary_Signature: failed.(-18022398)
pit_check_signature (RECOVERY) invalid.
[TIMA trusted boot]: SEANDROID ENFORCING
Set invalid sign flag
No need to update kernel type.
[EFUSE] warranty bit is already set.
ace_hash_sha_digest: passed.(0)
tboot ctx base: 45720248
SMC Num = 0x83000001
mobismc success!!! [ret = 0]
SMC Num = 0x83000007
mobismc for tima info success!!! [ret = 0]
Pass. DTBH size is smaller than a page.
<dtbh_header Info>
magic:0x48425444, version:0x00000002, num_entries:0x00000008
<device info>
chip_id: 0x00001cfc
platform_id: 0x000050a6
subtype_id: 0x217584da
hw_rev: 0x0000000b
dt_entry[06]
chip_id: 0x00001cfc
platform_id: 0x000050a6
subtype_id: 0x217584da
hw_rev: 0x0000000a
hw_rev_end: 0x0000000b
offset: 0x0010a000
dtb size: 0x0002c800
Selected entry hw_ver : 11
dt_entry of hw_rev 10 is loaded at 0x4a000000.(182272 Bytes)
[EFUSE] RB count: device(0x3), binary(0x3)
[OTP] SW LOCK Success
DDI value :0x0000000f
sw_lock success
sw_lock success
Forced Enable KAP
Warranty Bit Set - Blowing KAP_VIOLATION_FUSE
KAP status = 5afe0003
ATAG_CORE: 5 54410001 0 0 0
ATAG_MEM: 4 54410002 20000000 40000000
ATAG_MEM: 4 54410002 20000000 60000000
ATAG_MEM: 4 54410002 20000000 80000000
ATAG_MEM: 4 54410002 20000000 A0000000
ATAG_MEM: 4 54410002 20000000 C0000000
ATAG_MEM: 4 54410002 1E800000 E0000000
ATAG_SERIAL: 4 54410006 XXXXXXXX XXXXXXXX
ATAG_INITRD2: 4 54420005 43000000 5fbd8f
ATAG_REVISION: 3 54410007 b
check_rustproof [0,0] On
ucs flag is Unknown
ucs flag : 00 00 00 00
ATAG_CMDLINE: f0 54410009 'console=ram loglevel=4 bootmode=2 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.hardware=samsungexynos7420 androidboot.debug_level=0x4f4c ess_setup=0x46000000 [email protected] [email protected] charging_mode=0x3000 s3cfb.bootloaderfb=0xe2a00000 sysscope=0x6b090719 lcdtype=4325395 consoleblank=0 lpj=239616 sec_debug.reset_reason=5 ehci_hcd.park=3 oops=panic pmic_info=35 cordon=c34c0eba5576148dc662cf43a6352c3b connie=SM-G920F_OPEN_EUR_c3811d70601ea690b7b0b2afca80be2c fg_reset=0 androidboot.emmc_checksum=3 androidboot.boot_salescode= androidboot.odin_download=1 androidboot.bootloader=G920FXXU3DPDP androidboot.selinux=enforcing androidboot.security_mode=1526595585 androidboot.ucs_mode=0 androidboot.hw_rev=11 androidboot.warranty_bit=1 androidboot.hmac_mismatch=0 androidboot.sec_atd.tty=/dev/ttySAC1 androidboot.serialno=XXXXXXXXXXXXXXXX snd_soc_core.pmdown_time=1000 zero_sdchg_ic=0 androidboot.fmp_config=0'
ATAG_NONE: 0 0
pack_atags: ramdisk size start 0x43000000, size 0x5fbd8f
Updating device tree @0x4a000000: done
Starting kernel at 0x40205000...
SWITCH_SEL(3)
BOOTING TIME : 2895
Here it is, mate. I can't seem to find anything suspicious besides
Code:
dNumAllocUnits error at LU7 0 0
PROVISION : FAIL
PROVISION : FAIL
but I can only guess
Hi I am having problems compiling due to the kernel. Which kernel source should I use? How should I configure it? Help pleaase
Added "extract files" guide.
Whenever I try to download the CyanogenMod repo, I get this error:
error: Exited sync due to fetch errors
I've tried using: repo sync -f and: repo sync --force-sync
I'm trying to download the CM13 repo.
I've also followed the steps exactly as they were written.
I'm trying to build cm-14.0. Fails at
HTML:
Starting build with ninja
ninja: Entering directory `.'
ninja: error: '/home/julian/android/system/out/target/product/zerofltexx/obj_arm/SHARED_LIBRARIES/libsecril-client_intermediates/export_includes', needed by '/home/julian/android/system/out/target/product/zerofltexx/obj_arm/SHARED_LIBRARIES/audio.primary.universal7420_intermediates/import_includes', missing and no known rule to make it
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
make: Leaving directory '/home/julian/android/system'
.
Any ideas what could be wrong?
/android/system/kernel/samsung/exynos7420 contains github.com/CyanogenMod/android_kernel_samsung_exynos7420 cm-14.0.
Thanks for the great guide anyway