I'm getting the below Error.
D:\Sunil\Flashing cmd\fastboot_with_Android_USB_file\fastboot>fastboot.exe -i 0x
0fce getvar version
version: 0.3
finished. total time: 0.001s
D:\Sunil\Flashing cmd\fastboot_with_Android_USB_file\fastboot>fastboot.exe -i 0x
0fce oem unlock 0xDF461896BE2C2246
...
(bootloader) Unlock phone requested
FAILED (remote: oem unlock failed!)
finished. total time: 0.003s
D:\Sunil\Flashing cmd\fastboot_with_Android_USB_file\fastboot>
From the Sony website, did you follow these steps:
First, you should confirm that it is possible to unlock the boot loader of your phone by checking the service menu. In your phone, open the dialler and enter *#*#7378423#*#* to access the service menu.
In your phone, tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked.
Click to expand...
Click to collapse
Related
Hello,
Following a change of motherboard, not unlocking the bootloader
I have the following error message:
(bootloader) Unlock phone Requested
FAILED (remote: oem unlock failed!)
finished. Total time: 0.003
Maybe your IMEI changed?
the imei is tied to the radio so obtaining a new unlock cod from sony should fix your problem
that probably would fix it.
I need to send my htc bolt in for warranty repair. How do I return to full original stock state?
I can run the RUU.exe to return to stock os, but I still remain s-off, unlocked. Can anyone help me get back to s-on and locked?
Thanks.
marcram said:
I need to send my htc bolt in for warranty repair. How do I return to full original stock state?
I can run the RUU.exe to return to stock os, but I still remain s-off, unlocked. Can anyone help me get back to s-on and locked?
Thanks.
Click to expand...
Click to collapse
I don't think it's possible to get it back to locked...
fastboot oem lock will get it "relocked"
fastboot oem writesecureflag 3 should get it back to s-on
Thanks for the response
Oem lock didn't work on the bolt, but I haven't tried the other command. I'm hoping I can at least get s-on. Maybe sunshine will give options to the bolt after s-on...
Didn't realize I didn't need s off for flashing roms.
I'm not having luck with the suggested commands:
D:\HTCBolt\fastboot-win>
D:\HTCBolt\fastboot-win>fastboot devices
HT6B404***** fastboot
D:\HTCBolt\fastboot-win>fastboot oem lock
...
FAILED (remote: unknown command)
finished. total time: 0.016s
D:\HTCBolt\fastboot-win>fastboot oem writesecureflag 3
...
FAILED (remote: unknown command)
finished. total time: 0.014s
D:\HTCBolt\fastboot-win>
D:\HTCBolt\fastboot-win>fastboot oem ?
...
FAILED (remote: unknown command)
finished. total time: 0.007s
D:\HTCBolt\fastboot-win>
Nevermind, guess I wasn't in download mode on the phone:
D:\>fastboot oem writesecureflag 3
...
(bootloader) HTC KEY CARD VERSION: 7
(bootloader) VERIFY_PASS (0)
(bootloader) Partition verify pass
(bootloader) Write security level S-ON
OKAY [ 0.897s]
finished. total time: 0.900s
D:\>
Now to see how to lock.
NA
Here is how to get it back to Locked
https://forum.xda-developers.com/bolt/how-to/guide-set-bootloader-to-locked-unlocked-t3542131
Hello guys,
i have a problem. I installed the new rom on my x626 and it worked great, after that i locked bootloader by my mistake and the phone died (bricked with red light)
i followed the instruction with the unbrick, but i am unable to install anything new because the bootloader is locked.
The phone also is in the bootloap state without any recovery. I got acces to fastboot mode only.
I followed a guide, it worked once on my another le s3 x626 but right now it dont want to work because bootloader is locked.
when i put "fastboot oem unlock" - it says that operation is not allowed. I am stuck at this point.
I know that i made mistake, i am idiot but I will be very pleased if someone experienced could help me.
gozef14 said:
Hello guys,
i have a problem. I installed the new rom on my x626 and it worked great, after that i locked bootloader by my mistake and the phone died (bricked with red light)
i followed the instruction with the unbrick, but i am unable to install anything new because the bootloader is locked.
The phone also is in the bootloap state without any recovery. I got acces to fastboot mode only.
I followed a guide, it worked once on my another le s3 x626 but right now it dont want to work because bootloader is locked.
when i put "fastboot oem unlock" - it says that operation is not allowed. I am stuck at this point.
I know that i made mistake, i am idiot but I will be very pleased if someone experienced could help me.
Click to expand...
Click to collapse
Here is the solution to your problem !!!
https://forum.xda-developers.com/le-2/help/brick-restoration-flashtool-s28-x620-t3754590
I have the same problem, here's an output of some commands:
fastboot oem unlock:
FAILED (remote:
Unlock operation is not allowed
)
finished. total time: 9.629s
fastboot flashing get_unlock_ability:
(bootloader) unlock_ability = 0
OKAY [ 0.006s]
finished. total time: 0.007s
fastboot getvar unlocked:
unlocked: no
finished. total time: 0.002s
marksklava said:
I have the same problem, here's an output of some commands:
fastboot oem unlock:
FAILED (remote:
Unlock operation is not allowed
)
finished. total time: 9.629s
fastboot flashing get_unlock_ability:
(bootloader) unlock_ability = 0
OKAY [ 0.006s]
finished. total time: 0.007s
fastboot getvar unlocked:
unlocked: no
finished. total time: 0.002s
Click to expand...
Click to collapse
You have to turn on Oem unlock within Developer settings. Use the " all in one to tool"to unlock to he bootloader or flash emmc.boot while the phone is in fast boot mode.
KittyQueen said:
You have to turn on Oem unlock within Developer settings. Use the " all in one to tool"to unlock to he bootloader or flash emmc.boot while the phone is in fast boot mode.
Click to expand...
Click to collapse
I do not have access to android, my phone is bricked, i cannot unlock the bootloader that way.
When trying to unlock the bootloader the Oem unlock is grayed out and trying to file a unlock request i get these command responses:
Microsoft Windows [Version 10.0.17763.253]
(c) 2018 Microsoft Corporation. All rights reserved.
C:\Windows\system32>adb reboot bootloader
C:\Windows\system32>fastboot oem get_unlock_code
...
FAILED (remote: Please OEM unlocking in Settings)
finished. total time: 0.002s
C:\Windows\system32>fastboot oem unlock
...
FAILED (remote: Flashing Unlock is not allowed
)
finished. total time: 0.004s
C:\Windows\system32>fastboot oem get_unlock_code
shadowtuy said:
When trying to unlock the bootloader the Oem unlock is grayed out and trying to file a unlock request i get these command responses:
Microsoft Windows [Version 10.0.17763.253]
(c) 2018 Microsoft Corporation. All rights reserved.
C:\Windows\system32>adb reboot bootloader
C:\Windows\system32>fastboot oem get_unlock_code
...
FAILED (remote: Please OEM unlocking in Settings)
finished. total time: 0.002s
C:\Windows\system32>fastboot oem unlock
...
FAILED (remote: Flashing Unlock is not allowed
)
finished. total time: 0.004s
C:\Windows\system32>fastboot oem get_unlock_code
Click to expand...
Click to collapse
Just guessing here....When you sim unlocked did you do the temp unlock or perm unlock?
Does my phone need to be carrier unlocked?
shadowtuy said:
Does my phone need to be carrier unlocked?
Click to expand...
Click to collapse
You need to contact T-Mobile if you got the phone from them and request a Permanent Sim unlock.
Here is a thread that has lot's of discussion and info...https://forum.xda-developers.com/oneplus-6t/how-to/discussion-t-mobile-unlock-bin-waiting-t3863546
And here if you want to bypass all that... https://forum.xda-developers.com/oneplus-6t/how-to/t-mobile-6t-to-international-t3888307
I took the T-Mobile route just to get the unlock .bin from OnePlus just in case I ran into a need for it in the future. Also because the other route didn't come along until after I applied LOL.
I have tried to unlock my bootloader using fastboot flashing unlock and fastboot flashing unlock_critical, however I get the error message:
Code:
(bootloader) Start unlock flow
FAILED (remote: '
Unlock operation is not allowed
')
fastboot: error: Command failed
I have turned on OEM unlocking in developer settings, and the output of fastboot flashing get_unlock_ability is:
Code:
(bootloader) unlock_ability = 16777216
OKAY [ 0.002s]
Finished. Total time: 0.002s
From that output, the bootloader unlock should work, however, it does not. Please help me.