Just done the lag fix for my Galaxy S and it all seemed to go through fine. Tried running Quandrant benchmark to test it but it crashed. I turned the phone off and on, got the Galaxy S i9000 screen then is just goes blank, literally nothing, not even the menu or back lights. Had to then take the battery out to reboot but got the same blank screen.
I can boot into recovery but rebooting from that doesn't work either, does anyone know how to fix this? don't want to try anything for fear of making it worse
Thread moved in Galaxy S I9000 General.
Tobert said:
Just done the lag fix for my Galaxy S and it all seemed to go through fine. Tried running Quandrant benchmark to test it but it crashed. I turned the phone off and on, got the Galaxy S i9000 screen then is just goes blank, literally nothing, not even the menu or back lights. Had to then take the battery out to reboot but got the same blank screen.
I can boot into recovery but rebooting from that doesn't work either, does anyone know how to fix this? don't want to try anything for fear of making it worse
Click to expand...
Click to collapse
Try getting into the Recovery Mode with the 3 button combo
instruction on wiki http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/GT-I9000
What lag fix are you using and what firmware are you on?
wont boot..
Hi, strangely but after the 2.2 upgrade on my SGS (it was JF5 and I made the trick with the registry to JPC and upgrade via KIES) it happened to me as well.. just a beautiful "S" blinking on the screen and nothing happens. On the time of upgrade in the instructions it was written that with the 3combo trick to make factory reset.. then everything worked just fine until yesterday...
Without installing any new apps, just browsing and trying to make my AllShare working.. I decided to gave up and without reason I have decided to restart my phone just to free RAM and etc.. And by no reason at all I got the same ****ty "S" screen and no boot.. tried first to wipe the cache.. didn't help.. and just after again factory reset it worked out and the phone is okay...
So probably for you the solution is really only factory reset, however this is very strange behavior
When I first applied the lagfix from the market in apk type it required an auto reboot to see if things wokred ok (as prompted on the screen).
Anyway, my phone stuck to a black screen and I was in a very inconvenient situation not to be able to use a PC (yeah, now I know I shouldn't mess with stuff like that while I'm on-the-go).
Long story short, after a couple of manual reboots (by taking out the battery for some seconds) it came back to life and no problems ever since. So before flashing (which can be rather incovenient if you have no backups etc) try the above mentioned method.
Original JF3 firmware (yeah need to change that).
My wonderful wife gave me an Acer a500 for Christmas. Awesome gift. I had rooted it immediately with no problems, since all of my phones and families phone are rooted, it just seemed to be the natural thing to do.
As someone that "plays" with their android a lot I did all of the backups. Well, the time came to have my tablet "approved" for use at my company and also have the appropriate "encryption" software and keys added. Just as a precaution I decided to restore the original backup and unroot the tab.
All was going well until I received the update message. I went ahead and downloaded the update and ran it. During the install process it froze. I thought it was just busy so I left it for a good 20 minutes and finally realized it was frozen. I rebooted and it went through a couple of reboots and finally settled on the lock screen. But now I find the touch screen unresponsive.
I plugged in a mouse and keyboard in hopes that I could get back into it and start over, but, although, the mouse shows up, it is jumpy sluggish and will not grab the lock to slide open and eventually freezes.
I have tried all of the "update.zip" files I could find and they all fail at one point or another.
ADB allows me to explore in shell but since I unrooted, I cannot get su privileges.
Acer is of course, useless and the vendor it was purchased from is worthless.
I have been through every thread I could find and tried every trick I could come up with. Now I'm just stuck.
Any help is appreciated
I've had this a couple of times already. Usually just turning the screen off and on a couple of times does the job (the issue seems to be with the driver, also on various custom roms). Just try it after each off-on cycle, most of the time it takes no more than two or three tries, though there are exceptions.
Thanks, but it has been rebooted many many times since it's demise.
Decided to skip sleep tonight and keep plugging away.
I found an update.zip recovery file for an a501. Figured I can't do much worse so I went ahead and ran it.
It froze at about 95% but.........
Good News:
The tablet is responsive and touch panel works again.
Bad News:
It boots straight into system settings and although you can open the settings menu, nothing actually launches.
Decided to try all of the old update.zips and still everything fails.
No more ADB response.
When you originally unrooted your device did you revert back to the stock recovery or did you leave cwm on your device?? If you left cwm on your device that may be the problem with the update.zips and OTAs.
You are sooo right. I've never gone back to a stock rom before and I completely forgot about reverting to the stock recovery.
As a matter of fact, I was on Civato's Flexstriker 3.2.1 rom with the new CWM before I reverted back to the stock rom.
Well, at least we've determined my stupid mistake, but now the question lies: "How do I get back to any working rom?"
Here's an update. I did find an update.zip file that also begins to load but does not finish. It stops at 95% still.
I will attach the photos in case someone notices something otherwise I am at a loss. In addition to all of the above, I tried everything I could to get into APX mode but nothing. I am willing to try almost anything at this point, so all suggestions are appreciated.
Something I noticed was the recovery for the a501 was android with gears spinning in the body. The recovery I have now is a package with an arrow. The recoveries are different. The current update file is Acer_A500_1.145.05_COM_GEN1
So this brings me to a question: Can I put Thor's 1.6 CWM back on the a500 and at least work from there? I do have my original backups and thought I might be able to get somewhere that way.
I bought a refurbished TF101 about 6 months ago. I rooted the device and tried various ROMs until I settled upon "Revolver 4 by Gnufabio | 4.1.1 Stable". Life was good, no random reboots, no sleep of death just great. I then installed a game called "Dead Trigger" that came up recently on the Play store. The game did not load, crashed without a FC message and so I uninstalled it promptly. Then I started getting video corruption on my Live Wallpaper (Blue Skies). Random reboots soon followed. Time to start over.
I used CWM and wiped the tablet from there (data, cache and Dalvik) and reinstalled Revolver. It did not work. I used the EasyFlasher tool to return my tablet to Stock using the Asus provided firmware from their website (.24). It seemed to work well, as I started over with my "new" tablet and synced to my account, etc, etc, etc. But now I can't use it without it rebooting every 30secs to 1min. It will go into a Sleep of Death on a random basis also. I have not installed any programs on it, I tried not allowing a restore of my Google settings and cannot for the life of me figure out what is going on.
I am unaware of the SBK version, as their is no indication on the tablet of its serial. What vital step am I missing here to revive this tablet? Any help would be appreciated.
Thanks
StevieJake
steviejake said:
I bought a refurbished TF101 about 6 months ago. I rooted the device and tried various ROMs until I settled upon "Revolver 4 by Gnufabio | 4.1.1 Stable". Life was good, no random reboots, no sleep of death just great. I then installed a game called "Dead Trigger" that came up recently on the Play store. The game did not load, crashed without a FC message and so I uninstalled it promptly. Then I started getting video corruption on my Live Wallpaper (Blue Skies). Random reboots soon followed. Time to start over.
I used CWM and wiped the tablet from there (data, cache and Dalvik) and reinstalled Revolver. It did not work. I used the EasyFlasher tool to return my tablet to Stock using the Asus provided firmware from their website (.24). It seemed to work well, as I started over with my "new" tablet and synced to my account, etc, etc, etc. But now I can't use it without it rebooting every 30secs to 1min. It will go into a Sleep of Death on a random basis also. I have not installed any programs on it, I tried not allowing a restore of my Google settings and cannot for the life of me figure out what is going on.
I am unaware of the SBK version, as their is no indication on the tablet of its serial. What vital step am I missing here to revive this tablet? Any help would be appreciated.
Thanks
StevieJake
Click to expand...
Click to collapse
The RR and SoD come standard with asus stock FW for most people, there is a new .27 update you could try that apparently fixes things, but it made things worse for me
The serial number is generally on a sticker next to the charger port of the tablet half, B4O > B60 and some B7O are SBK1, after that are SBK2
If you are SBK1 you can use NVFLASH to clean install the OS
I decided on Stock FW Rooted and CWM with PERI, then Guevors Kernel
So far so good, stable for a couple days now
Thanks for the quick reply. I did try the .27 update OTA update after getting back to Stock. No help.
The sticker in question is missing. Unknown SBK. I used EasyFlasher using SBK Ver1 and it worked to install the Stock .24 OS fine.
I will give the Stock FW Rooted a shot and see if that works
StevieJake
steviejake said:
Thanks for the quick reply. I did try the .27 update OTA update after getting back to Stock. No help.
The sticker in question is missing. Unknown SBK. I used EasyFlasher using SBK Ver1 and it worked to install the Stock .24 OS fine.
I will give the Stock FW Rooted a shot and see if that works
StevieJake
Click to expand...
Click to collapse
If the flash worked with sbkv1, then more than likely the unit is sbkv1. Otherwise, it shouldn't have worked at all . As the other poster said, RR and SoD is pretty common with the stock Asus firmware for some people -- you might try returning to Revolver now that you've gone back to stock, and start on Revolver again with a clean slate.
I am also running the same setup as the previous poster, stock .27, rooted with guevor's kernel. Been that way for only a day right now, so I can't say much about it yet.
Okay, so here is what I have done. I first used NvFlash to flash Stock .24 successfully. I then extracted the ASUS .24 firmware file (zip only) to the MicroSD card which the system took as an update and installed over my good work. It works, albeit with reboots still. I at least got it working and will try some more ROMs (Stock .27 first) with the suggested kernel. I just wish I could get back to the stable Revolver I had earlier.
Thanks for the help and suggestions.
StevieJake
steviejake said:
Okay, so here is what I have done. I first used NvFlash to flash Stock .24 successfully. I then extracted the ASUS .24 firmware file (zip only) to the MicroSD card which the system took as an update and installed over my good work. It works, albeit with reboots still. I at least got it working and will try some more ROMs (Stock .27 first) with the suggested kernel. I just wish I could get back to the stable Revolver I had earlier.
Thanks for the help and suggestions.
StevieJake
Click to expand...
Click to collapse
If you used NVFLASH to get back to stock, you could have just let the FOTA update you to .27
Then you can root and so on after that
NVFLASH returns the tablet to factory settings, ie. as it was when you unwrapped it on day 1
Not good. My tablet seems to be in an internal storage hell. Every Rom I try to install will crash with moderate use after booting. I have tried NvFlash, EasyFlash, Wolfs Ultimate flash and downgrade, every variation of stock HoneyComb and ICS I can find. I cannot keep this thing stable beyond 5 minutes of use. I have tried multiple factory resets and wipes, run "Superwipe Full" multiple times and nothing seems to work. What can I do to recover this tablet before I just give up and send to ASUS (god help me) for assistance? Any help would be appreciated
Thanks StevieJ
Ouch. Sorry to hear about your troubles. Horror stories like this have prevented me from diving into the root and custom rom scene with my one and only tab. [I am leaning towards a Nexus 7 when it comes out, and will perhaps root etc when I get that. I feel like it's a safer endeavour with a non-locked bootloader]
I'm interested in finding out what may be causing all this, so I'll be subscribing to this thread. Sorry I can't provide anything more than good luck to you.
Sent from my Transformer TF101
Ouch is right! I have rooted every Android device I have ever owned and this the first I have ever had this much trouble with. I just wish I could say I did "X" to cause it to happen. Oh well, maybe somebody knows something I have overlooked.
Note: I have Rogue XM Recovery 1.5.0 (CWM-based Recovery v5.0.2.8) running fine on the rom and it reboots into recovery okay.
StevieJake
steviejake said:
Ouch is right! I have rooted every Android device I have ever owned and this the first I have ever had this much trouble with. I just wish I could say I did "X" to cause it to happen. Oh well, maybe somebody knows something I have overlooked.
Note: I have Rogue XM Recovery 1.5.0 (CWM-based Recovery v5.0.2.8) running fine on the rom and it reboots into recovery okay.
StevieJake
Click to expand...
Click to collapse
Have you tried running it without the WIFI on? I went to my folks place with mine and it rebooted all the time as soon as it started up. It turned out to be a WIFI issue with the Dynalink router my parents were running.
Cheers, Matt.
hairy1 said:
Have you tried running it without the WIFI on? I went to my folks place with mine and it rebooted all the time as soon as it started up. It turned out to be a WIFI issue with the Dynalink router my parents were running.
Cheers, Matt.
Click to expand...
Click to collapse
Funny you should ask that. I just NvFlashed 9.2.1.24 and was using the tab with no WiFi, no account information and everything worked just fine. I then enabled WiFi to see what would happen and it still worked, but I had not logged in with any account information yet. It still worked fine, as I was able to surf the web with no problems. I then tried to add my account information and started getting crashes using the Play Store, syncing my accounts, etc. It seems to be linked to updating account information and not just WiFi. I will investigate further
Thanks
StevieJake
Adding an account, even a new account, will bring down the tablet. It reboots until it is only a dark screen that requires APX mode (VolUp +Pwr) to rebuild the tablet. I can get into recovery and also factory reset mode (VolDwn + Pwr), but that is it. I'm so confused
I found a CWM backup I had from back in March. It restored fine, but still had problems that resulted in multiple crashes and eventual death again. Oh Bother!!
StevieJake
Fixed it!
Here is what I did. I was always to get the tablet into APX mode (Vol Up + Pwr) so I NvFlashed 9.2.1.24 from this site:
http://xdafileserver.nl/index.php?dir=Asus/Asus+Transformer+(TF101)/. I did this 5 times, never letting the tablet fully reboot after I got the "success" message upon completion. I then did a data wipe (Vol Dwn +Pwr, then select Wipe Data and then Vol Up, Vol Up) 5 times. I then used the same NvFlash 5 more times and let the tablet fully reboot and entered my Google credentials. I had prepared a MicroSD card with the zip file extracted from the ASUS site that contained the latest firmware (.27) and placed in the root directory of the MicroSD card. The tablet recognized it as a system upgrade and installed the firmware grade with no problems. The tablet rebooted fine and showed the installed firmware. I then did a data wipe as described above 5 more times and then let the tablet reboot fully and once again entered my Google credentials. The tablet now runs all programs without faults, has no video artifacts on the live wallpaper I use (Blue Skies) and is running just great. I am able to update all apps with out errors from the Play Store which was also an issue.
I hope this helps someone to get their tablet back, as I used all the resources on this forum to bring this wacky method to restore my tablet. Thanks to all you unnamed posters for your help
StevieJake
I wouldn't expect flashing the same thing numerous times to have any more effect than the first flash, but if that's what it took for your tab to be re-born, so be it!
Congrats on the fix.
Sent from my Transformer TF101
Not so fast!
Although the tablet did last longer (almost 2 days), it ultimately failed again to an unbootable state. Its back to the drawing board again.........
StevieJake
rootblock said:
I wouldn't expect flashing the same thing numerous times to have any more effect than the first flash, but if that's what it took for your tab to be re-born, so be it!
Congrats on the fix.
Sent from my Transformer TF101
Click to expand...
Click to collapse
It may just be giving up, electronics are stupid sometimes and fail for no reason. I had a brand new HDD that worked for two days, I left the computer off for three weeks and when I turned it back on the HDD wouldn't even spin up :-/ Good luck buddy.
Okay, I'm done. Just got my RMA and am sending this puppy in. Thanks for all the help, I will try to post the results later when I get it back. Glad I made the impulse purchase for the Nexus 7, as I will not be totally without a tablet.
Thanks for all the help again
StevieJake
RMA and back from the Dead!
Well I got it back from ASUS after the RMA. It had a short visit in Texas, was returned promptly and appears to function normally. I never received any feedback from ASUS on receiving the tablet, what was wrong with it, what they did to it or when they shipped it. But its fixed. Running .27 latest firmware and seems to handle everything I can throw at it.
They did a bang up job so far and I am more than happy with their service.
StevieJake
Hi guys
Im having a nightmare with my vega, I have been running vegacomb for a while without issue and decided I fancied upgrading to an ICS ROM instead, but have hit major problems. I went into rom manager to do a nandroid before I flashed anything, when I opened the app it told me to confirm the device type. it came up saying viewsonic 10 so I confirmed it. Then it decided to re-flash the recovery from within the app, I let it do that too. Then I told it to do a backup of the current ROM, so it reboots and then I get nothing. It does the same thing that normally happens when you go into NVflash (screen backlight comes on, nothing else). I have plugged it into the PC and its not in this mode, its also not letting me get into nvflash using the 2 second hold method. Im really stummped now, I have been messing round with android for a while so im pretty familiar with flashing etc, but without being able to get into recovery im lost. Do you have any suggestions?
OK first, I will say that I have been reading for days and days and am getting nowhere at all. I am running out of time as I am leaving Monday backpacking from OKC to Portland to meet a friend, then proceeding immediately to about 35 national parks. I HAVE to get this thing functional so that I can depend on it on the road for communication. Its current state makes me nervous. I got this tablet already rooted, custom stock rom, and with an unlocked ICS boot loader version 0.3.11. The only problems with it were the common charger/screen response issue. For $100, I can deal with that.
I flashed the Lightspeed from from the main list, everything went well... Until it rebooted the first time. Since then, directly after the bootloader screen, it briefly shows what looks like semi-colorful TV static, then shows boot animation and boots into the OS. It has never frozen on either screen.
I decided Lightspeed was not at all what I wanted, so I flashed CM10. I have yet to find anywhere in the Aroma installer where I can choose the apps installed, ONLY THEME CUSTOMIZATION. After the flash, it kept the boot animation from CM, and loaded right back into what looked like Lightspeed, and shows Lightspeed in the about menu also. I reflashed it, choosing a different boot animation to test, and did the same thing again, except it loaded ZERO extra apps at all, not even the stock bloatware. Nothing from any of the 3 roms. I reflashed Lightspeed, same thing again. No extra apps and just bare basic stuff. EXCEPT SUPERUSER. THAT DID LOAD ONTO IT EACH TIME. I haven't lost root access, the recovery works fine.
I flashed the V8 bootloader, and tried the above again. Same issues still. All of them. I have read until I'm blue in the face. If there is a way to fix this without using a PC, that would be grand. I have very limited PC access.
Anyone have any ideas? I have followed every single step 100%, I'm positive. I'm not new to rooting, flashing, and jailbreaking (doesn't apply here I know),"so lay it on me.
EDIT- I downloaded the 4.0.4 FLEX-Reaper rom and going to try that now and then I give up for the night. Tomorrow is the last day I have to mess with this before I leave. I tried to upload screenshots of the problems, but it won't let me attach them. Maybe that is another problem. Ugh who knows. Help
EDIT- That rom bricked my tablet. Through that brick, I found a working solution for the SoD, found a way to recover without files on external SD, *THIS FIXES THE BRICKS CAUSED BY CM10 AND REFLEX!!!* and I didn't lose anything. This thing is back in pristine order. I can finally sleep! Will post later on how I did it. I need sleep now.