Related
Hi , i try to use real swap method for swapon partition on SD with the linux normal method
But i have a problem:
Function not implemented on kernel.
I describe the method:
Partition SD and make a little partition ext2 (100MB or 200MB is fine)
Open Terminal
#su (get root access)
#mkswap /dev/block/mmcblk0p2
and then
#swapon /dev/block/mmcblk0p2
With my kernel in the terminal i'm received a message
"Function not implemented."
I think is not implemented on kernel.
Maybe for other roms works fine.
We need to recompile the kernel with Swap support.
Somebody tried this method?
Regards...
bootloader is not bypassed, so we cannot have custom kernels -> we cannot have swap
Module can help.
Sent from my X8 using XDA Premium App
What module do you use?
maxiblammo said:
What module do you use?
Click to expand...
Click to collapse
None. It's his useless post
Sent from my SH!T Ericsson X8 running Froyobread using Tapatalk
Let's cut the crap. Seems like somebody on a Chinese forum figured out the way to apply the mod to MM2. I just translate it into English.
1. Download the attachment and unzip milestone2_more.ko to the root of sd
2. mount /system/ r/w
3. copy milestone2_more.ko to /system/lib/modules/
4. open terminal emulator
5. input the following command
su
chmod 644 /system/lib/modules/milestone2_more.ko
insmod /system/lib/modules/milestone2_more.ko touch_num=6
(the guy said if you choose a number greater than 6 the system will crash)
now you should get a 6-point-multitouch
original thread: http://bbs.gfan.com/android-1997547-1-1.html
Thank you soooooooo much! )))
Works but MT is still buggy...
oh my god.. thank you, it works.
5 is more than enough
OMG!! You made my day!
Sent from my A953 using XDA Premium App
Is this permanent? Or it'll go away when we reboot?
Sent from my A953 using XDA App
It will go away when you reboot, but its not a big deal to use the command again
Sent from my A953 using XDA Premium App
Just make a init.d script to load it up when the system boots and you won't have to worry about it again..
Just did this, but I think i wrote it wrong. Please correct me
I created a blank file and wrote inside it:
insmod /system/lib/modules/multitouchfix.ko (I replaced the name)
And saved the file as 99multitouchfix inside /system/etc/init.d/
I also fixed permissions for both files
Sent from my A953
Is it working Aragorn?
Thank you. I'll try it when I get home!
inheme said:
Is it working Aragorn?
Click to expand...
Click to collapse
Nope. The module works, but not the init.d script
you can use autostart from Market
AragornPE said:
Nope. The module works, but not the init.d script
Click to expand...
Click to collapse
Try this script:
Code:
#!/system/bin/sh
# Load 5 finger multitouch module
insmod /system/lib/modules/defy_more.ko
Also note that the first touch after reboot is delayed.
dangpzanco said:
Try this script:
Code:
#!/system/bin/sh
# Load 5 finger multitouch module
insmod /system/lib/modules/defy_more.ko
Also note that the first touch after reboot is delayed.
Click to expand...
Click to collapse
I'll try that as soon as my M2 wakes up, long day for it today =P
Actually,the patch is developed by korean , the XDA thread is http://forum.xda-developers.com/showthread.php?t=1162327
Autoload after reboot: copy install-recovery.sh to /system/etc and set rwxr-xr-x .
If you wanna change the touch point limit , open install-recovery.sh with text editor , change the number that follows "touch_num=". The range is 1~10.
My own test shows more than 6 touch points will NOT lead to system crash , but make it back to 2 points...orz. Since the same patch on D2/D2G/DEFY enable up to 10 points, why
m2 cound not
Ah, forgot to say , the autoload patch is ported from http://bbs.gfan.com/android-1997547-1-1.html
Neither autostart or init.d script worked. Going to try the install recovery
Sent from my A953
Install recovery didn't work either
Maybe I'm doing something wrong?
Sent from my A953
AragornPE said:
Neither autostart or init.d script worked. Going to try the install recovery
Sent from my A953
Click to expand...
Click to collapse
Did you set the permission properly，both milestone2_more.ko and install.sh.
All works fine, both the milestone2_more.ko and the install recovery, no problem at all, have 4 MT points now
Things you need:
Base firmware (i'm use Gingerbread S5830SERKPH 2.3.4)
Windows (I'm use windows 7 X64 service pack 1)
Linux (Ubuntu recommended)
And the last thing is, You need enough experience in android world
step-step :
Flash your phone with your desired base firmware.
Make required modifications at your phone.
After that, do hard reset to your phone.
Next back up system.rfs .
put system.rfs with boot.img, data.rfs, recovery.img from PDA base firmware in one folder.
After that, repack your custom rom.
what should we do to modify it :
Remove useless widgets
Add more apps
Change theme
How to back up System.rfs :
Download at market "terminal emulator"
next run this code:
Code:
su
dd if=/dev/stl12 of=/sdcard/system.rfs
How to hard reset your phone :
Move by root explorer your modification apps to system/app then change permission like this :
Code:
User:Read, Write
group:Read
Others:Read
Next change the owner to "root" by root explorer
At least boot into recovery mode "HOME+POWER" and choose "wipe data/factory reset" be sure your contact data already backup
How to repack your custom rom :
PDA by running this code via terminal at linux:
Code:
tar -H ustar -c boot.img recovery.img data.rfs system.rfs >> ROMNAME.tar
md5sum -t ROMNAME.tar >> ROMNAME.tar
mv ROMNAME.tar ROMNAME.tar.md5
change ROMNAME to your desired, of course, ROM name.
If you want to build One-Package ROM, just use 1st and 2nd command and don't forget to include all files on all *.tar.md5 (such as modem, csc, apboot) like this :
Code:
tar -H ustar -c *.* >> ROMNAME.tar
md5sum -t ROMNAME.tar >> ROMNAME.tar
How to change your rom name :
At root explorer you see at folder system "build.prop"
Open it in text editor edit "ro.build.display.id=GINGERBREAD.XXKPH" with your rom name
Another Handy Modification Guide:
How to edit system.rfs on your Pc :
importan : if you want to edit system.rfs at windows, DON'T use Magic Iso, why? because i was use it, then my system.rfs corrupt.
you must have linux (ubuntu recommended)
run it from terminal :
Code:
sudo mount -o loop system.rfs /some_dir
make required modification
then Unmount it
How to Unpacking & repacking the image :
Note: below I give you the details for unpacking and repacking manually, but I have attached two perl scripts that do most of this for you
If you are good with a hex editor, you can open up any of these images and strip off the first 2k of data. Then, look for a bunch of zeroes followed by the hex 1F 8B (which is the magic number of a gzip file). Copy everything from the first line of the file, through the zeroes, and stopping at the 1F 8B. That is the kernel. Everything from the 1F 8B through the end is the ramdisk. You could save each of these files separately. In order to see the contents of the ramdisk, you need to un-gzip it and then un-cpio it. You could use a command like this (ideally after creating a new directory and cd'ing into it):
Code:
gunzip -c ../your-ramdisk-file | cpio -i
That will place all of the files from the ramdisk in your working directory. You can now edit them.
In order to re-create the ramdisk, you need to re-cpio them and re-gzip those files, with a command like the following (remember, cpio will include everything in the current working directory, so you probably want to remove any other cruft you might have in there):
Code:
find . | cpio -o -H newc | gzip > ../newramdisk.cpio.gz
The final step is to combine the kernel and your new ramdisk into the full image, using the mkbootimg program (which you should download and compile from the git repository):
Code:
mkbootimg --cmdline 'no_console_suspend=1 console=null' --kernel your-kernel-file --ramdisk newramdisk.cpio.gz -o mynewimage.img
Now, there's a lot of hassle in pulling apart files in hex editors and remembering all of these commands, so I wrote unpack and repack perl scripts for you (attached). Hooray.
How to Manually deodex your phone :
What you'll need:
xUltimate v2.2
Unzip xUltimate v2.2, and launch "Main.exe"
If everything goes well xUlt should recognize the phone and make a connection. You now should see a list of options.
Run option 1. After option 1 is done, run option 2.
Now these well take a while. Run option 3.
IMPORTANT: After you have run option 3, you MUST navigate to the xUltimate folder and find "origi_frame" folder, and delete "guava.odex". It's a bad file, and interferes with deodexing process.
Now run option 4, and wait.
Exit xUltimate, and put the phone in USB mass storage.
Go back into the xUltimate folder and copy "done_frame", and "done_app", and move them to the root of the sdcard.
Put the phone in PC mode
Open a command prompt, and do the following:
Code:
adb shell
su
stop
mount -o rw,remount -t ext3 /dev/block/mmcblk1p21 /system
cp /sdcard/done_app/* /system/app/
cp /sdcard/done_frame/* /system/framework/
rm /system/app/*.odex
rm /system/framework/*.odex
mount -o ro,remount -t ext3 /dev/block/mmcblk1p21 /system
reboot
Your phone should now be deodexed!
You may notice an increase in speed, and you now have the ability to edit certain files with greater effects.
How to change bootanimation :
using a Root explorer goto the /system/media directory.
Copy bootanimation.zip to your SD Card.
Connect your droid to your computer with usb and mount the SD Card
Copy bootanimation.zip to your computer.
extract bootanimation.zip to a folder
Inside you will find 2 folders with all the individual PNG files in them.
With photoshop or paint modify the png files to add your custom graphics, OR make/download your own pictures. (Make sure they are match with your phone device)
Highlight the two folders and the desc file.
Right click the highlighted files.
Select add files to archive.
Select Zip check box
In the compression method drop down box select Store. (this is key if you dont do this it wont play the animation)
save the archive as bootanimation.zip
copy the new bootanimation.zip to your SD Card
Select the bootanimation.zip file from your SD Card and move it... system>media>paste
________________
i'm just 12 years old if i can do it, why you can't
Advantages of this way is :
More efficient
Reduce your internet usage (dont need kitchen, apk manager, etc)
Easy to modification (You can see the direct result)
Reduce your time (only 2 hours i can do this way)
More soon
You steal my IDEAS Univos! No, just kidding, there are incorrect guide on "how to hard reset" lol. Anyway, try to build a ROM before creating this guide, my friend.
Wow Kids!
are doing development now a days
fla.sh said:
You steal my IDEAS Univos! No, just kidding, there are incorrect guide on "how to hard reset" lol. Anyway, try to build a ROM before creating this guide, my friend.
Click to expand...
Click to collapse
im not steal it.
Where is incorrect guide i'm try to fix it?
Sent from my GT-S5830 using XDA App
GadgetCheck said:
Wow Kids!
are doing development now a days
Click to expand...
Click to collapse
Thanks
Sent from my GT-S5830 using XDA App
This guide tested by me, and i have get result from this.
Sent from my GT-S5830 using XDA App
If you have question just ask me!
Sent from my GT-S5830 using XDA App
I think this guide is the same with fla.sh's guide.
devilsking said:
I think this guide is the same with fla.sh's guide.
Click to expand...
Click to collapse
Different, Fla.sh make guide for cooking his rom.
in this thread i tell you how to make your own custom rom.
with Phone device Samsung Galaxy Ace.
Univos said:
Different, Fla.sh make guide for cooking his rom.
in this thread i tell you how to make your own custom rom.
with Phone device Samsung Galaxy Ace.
Click to expand...
Click to collapse
ya ya. I see tks for your guide
devilsking said:
ya ya. I see tks for your guide
Click to expand...
Click to collapse
Please press thanks button, if i helped you
Sent from my GT-S5830 using XDA App
Univos said:
This guide tested by me, and i have get result from this.
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
Now that you're awesome like fla.sh , I'll be quietly tucking in a corner thinking how young teenagers get their knowledge . XD jkjk
EmoBoiix3 said:
Now that you're awesome like fla.sh , I'll be quietly tucking in a corner thinking how young teenagers get their knowledge . XD jkjk
Click to expand...
Click to collapse
Just kept reading, ask people, don't feel has a lot of knowledge, kept countinue to learn
Sent from my GT-S5830 using XDA App
EmoBoiix3 said:
Now that you're awesome like fla.sh , I'll be quietly tucking in a corner thinking how young teenagers get their knowledge . XD jkjk
Click to expand...
Click to collapse
Maybe this holiday i will developt a simple custom rom.
Sent from my GT-S5830 using XDA App
Univos said:
Maybe this holiday i will developt a simple custom rom.
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I am thinking about a kid with two or more different XDA ID.
ketut.kumajaya said:
I am thinking about a kid with two or more different XDA ID.
Click to expand...
Click to collapse
No, the real name Fla.sh is "Aver..." my real name is "iz..." we are student of junior high school at surabaya. I'm "Aver..." friend.
Sent from my GT-S5830 using XDA App
Univos said:
No, the real name Fla.sh is "Aver..." my real name is "iz..." we are student of junior high school at surabaya. I'm "Aver..." friend.
Sent from my GT-S5830 using XDA App
Click to expand...
Click to collapse
I'm swear.
Sent from my GT-S5830 using XDA App
ketut.kumajaya said:
I am thinking about a kid with two or more different XDA ID.
Click to expand...
Click to collapse
ROFLAMO
Jukirdolly said:
ROFLAMO
Click to expand...
Click to collapse
??????
Sent from my GT-S5830 using XDA App
Thread closed.
Thread closed.
Yank555 said:
Hi,
REMEMBER
FIRST OF ALL, do a Nandroid backup, as well as a backup of your sd-card content !
You're doing this at your very own risk, I'm not to be held responsible if something goes wrong
Now that said, let's get going
In case somebody wants to check it out, here is the swap activation script I wrote (attached) as well as explanations on how to make it all work :
1) Partition your sd-card (Minitool Partition Wizard, 4ext, CWM...)
2) Boot your system with the partitionned sd-card
3) If necessary customize the 99swap script (attached to this post) and then put it onto your sd-card's root folder, you'll need it while executing the commands in step 4.
4) Open a terminal and type the following
NB: Change "mkswap /dev/block/mmcblk0p3" accordingly to point to the swap partition you've created in step 1.
5) Reboot your phone, start a terminal again and type free, you'll need to see something different than 0 in your swap line, look at the attached print-screen
Swappiness will be set to 50 by the script, which is a rather conservative swap use, made sense to me since SD-swap is slower than ram, better not to use it too agressively. Feel free to experiment with the swappiness variable in the script (values between 0 and 100, 0 meaning "try not to swap", 100 meaning "try to swap all the time")
If you want to try and have a question, just let me know !
JP.
PS: You can find the thread for hard swap for the htc Sensation / XE here.
Click to expand...
Click to collapse
Hi JP,
This is a gem of a post! Thanks alot for the script and the detailed breakdown. Before I get into it though, I must warn you that I am more of a beginner with no coding/scripting experience (I don't know how to use adb or anything)...
Here's what I'm trying to do: I'm trying to activate hard-swap on my hd2 (currently) running the ParanoidAndroid by Xylograph. I've created 3 partitions on my 16gb class 6 sd card: first, fat32 (32k cluster), next, 1GB ext2 (default), 500MB swap.
Procedure:
1. I extracted the script and copied it directly to system/etc/init.d folder of the Rom (I looked at the terminal commands you posted and the first few lines looked like copying the file from the sd root to the init.d folder (it was just a guess though), so I figured might as well put it into the rom before I flash it)
2. Flashed the rom
3. To activate it, I typed the following into the terminal:
su
mount -o remount,rw /system
mkswap /dev/block/mmcblk0p3
mount -o remount,ro /system
exit
after the mkswap command, I did get an activation notification that a certain amount was assigned to swap. But my celebrations were cut short after I rebooted and used the free command to check. The entire swap row still read 0.
I was wondering if you can point me in the right direction... thanks!
Also, is there a way to create a cwm flashable version?
bullcrapr said:
Hi JP,
This is a gem of a post! Thanks alot for the script and the detailed breakdown. Before I get into it though, I must warn you that I am more of a beginner with no coding/scripting experience (I don't know how to use adb or anything)...
Here's what I'm trying to do: I'm trying to activate hard-swap on my hd2 (currently) running the ParanoidAndroid by Xylograph. I've created 3 partitions on my 16gb class 6 sd card: first, fat32 (32k cluster), next, 1GB ext2 (default), 500MB swap.
Procedure:
1. I extracted the script and copied it directly to system/etc/init.d folder of the Rom (I looked at the terminal commands you posted and the first few lines looked like copying the file from the sd root to the init.d folder (it was just a guess though), so I figured might as well put it into the rom before I flash it)
2. Flashed the rom
3. To activate it, I typed the following into the terminal:
su
mount -o remount,rw /system
mkswap /dev/block/mmcblk0p3
mount -o remount,ro /system
exit
after the mkswap command, I did get an activation notification that a certain amount was assigned to swap. But my celebrations were cut short after I rebooted and used the free command to check. The entire swap row still read 0.
I was wondering if you can point me in the right direction... thanks!
Also, is there a way to create a cwm flashable version?
Click to expand...
Click to collapse
Thanx
In fact you understood correctly that is was about copying the file to init.d.
By the way, these commands do the following :
mount -o remount,rw /system - Mount system partition in read-write
mount -o remount,ro /system - Mount system partition in read-only
So to format the swap partition "mkswap /dev/block/mmcblk0p3" there was no need for it, but it didn't harm in any way, so you're fine there
I guess what is missing is the "chmod 755 /system/etc/init.d/99swap" command which will set the correct file access to the script so it can get executed at boot.
You might do the following in a terminal :
su
mount -o remount,rw /system
chmod 755 /system/etc/init.d/99swap
mount -o remount,ro /system
exit
It should be fine then.
Alternatively you could set the rights with your file explorer (in root explorer mode), they must be "rwxr-xr-x" (which is Read-Write-Execute, Read-Execute, Read-Execute), most file-manager will allow you to do that as well.
I've been working on the script variant for htc Sensation, it is more advanced, dynamic so it can find the swap partition by itself.
I'll make a CWM flashable as soon as I get to it that will handle everything except partitioning the SD card, obviously, for both devices.
As soon as I'm done I'll post the HD2 version here as well (very little change, between both devices, just the access path to the sd-card partitons to change (=1 line in the script).
JP.
Edit ------------------------------------------------
I just reread your post, if in fact you put it into the ROM zipfile, then file access should be correct !?
Could you post the following file (if it exists) :
/data/swap.0.log ?
JP.
Yank555 said:
Thanx
In fact you understood correctly that is was about copying the file to init.d.
By the way, these commands do the following :
mount -o remount,rw /system - Mount system partition in read-write
mount -o remount,ro /system - Mount system partition in read-only
So to format the swap partition "mkswap /dev/block/mmcblk0p3" there was no need for it, but it didn't harm in any way, so you're fine there
I guess what is missing is the "chmod 755 /system/etc/init.d/99swap" command which will set the correct file access to the script so it can get executed at boot.
You might do the following in a terminal :
su
mount -o remount,rw /system
chmod 755 /system/etc/init.d/99swap
mount -o remount,ro /system
exit
It should be fine then.
Alternatively you could set the rights with your file explorer (in root explorer mode), they must be "rwxr-xr-x" (which is Read-Write-Execute, Read-Execute, Read-Execute), most file-manager will allow you to do that as well.
I've been working on the script variant for htc Sensation, it is more advanced, dynamic so it can find the swap partition by itself.
I'll make a CWM flashable as soon as I get to it that will handle everything except partitioning the SD card, obviously, for both devices.
As soon as I'm done I'll post the HD2 version here as well (very little change, between both devices, just the access path to the sd-card partitons to change (=1 line in the script).
JP.
Edit ------------------------------------------------
I just reread your post, if in fact you put it into the ROM zipfile, then file access should be correct !?
Could you post the following file (if it exists) :
/data/swap.0.log ?
JP.
Click to expand...
Click to collapse
Hi JP
You are incredibly helpful and I appreciate it!
I finally got some time off and tried out what you mentioned... but to no avail. I applied the necessary permissions through the terminal (chmod 755) as well as through the root browser, but it was still the same. After that I even retried the terminal commands, and included the "chown 0:2000...", but that didn't work either...
... and then I saw your post update...
About that, i just typed it into the terminal, and I got "not found".
Was that what I was supposed to do?
bullcrapr said:
Hi JP
You are incredibly helpful and I appreciate it!
I finally got some time off and tried out what you mentioned... but to no avail. I applied the necessary permissions through the terminal (chmod 755) as well as through the root browser, but it was still the same. After that I even retried the terminal commands, and included the "chown 0:2000...", but that didn't work either...
... and then I saw your post update...
About that, i just typed it into the terminal, and I got "not found".
Was that what I was supposed to do?
Click to expand...
Click to collapse
Hi,
You're welcome
The file '/data/swap.0.log' is a text-file containing info on the execution of the script...
If it's not there, then the script didn't run at all...
I should have a little time later today, will try to make the CWM flashable solution for you, should be a no fuss solution, as long as the sd-card has a swap partition
How did you partition the card ? CWM ?
JP.
Sent from my Android Revolution HD 6.6.5 XE / faux kernel 007b3 powered htc Sensation XE using xda premium
I created a 256Gb partition...
Click to expand...
Click to collapse
man thats a helluva sd card ya have there! hehe.
samsamuel said:
man thats a helluva sd card ya have there! hehe.
Click to expand...
Click to collapse
Haha I noticed that too :') I want one of those now
Nigeldg said:
Haha I noticed that too :') I want one of those now
Click to expand...
Click to collapse
Thanx for pointing that out Mb of course, but in a few years that might be possible
My first hdd had 60Mb, and that's not soooo long ago
JP.
Sent from my Android Revolution HD 6.6.5 XE / faux kernel 007b3 powered htc Sensation XE using xda premium
heh, my first was a 20mb HDD mounted on a pcb card and plugged into an ISA slot, took up the full length of the PC, weighed LOADS, could have beaten burglars to death with it.
bullcrapr said:
Hi JP
You are incredibly helpful and I appreciate it!
I finally got some time off and tried out what you mentioned... but to no avail. I applied the necessary permissions through the terminal (chmod 755) as well as through the root browser, but it was still the same. After that I even retried the terminal commands, and included the "chown 0:2000...", but that didn't work either...
... and then I saw your post update...
About that, i just typed it into the terminal, and I got "not found".
Was that what I was supposed to do?
Click to expand...
Click to collapse
+1 with this (also on Paranoid Rom 1.1a) but I think that it's something with the ROM coz on earlier build v1 this method worked verry good I hope that Yank will find a solution coz it reallly helps wit our 576 ram
samsamuel said:
heh, my first was a 20mb HDD mounted on a pcb card and plugged into an ISA slot, took up the full length of the PC, weighed LOADS, could have beaten burglars to death with it.
Click to expand...
Click to collapse
Mine was huge at the time, was on of the first to have such a big one, even partitioned it into 3 since it was just too big And it was an external device, the size of a pizza-box (it was en Atari Megafile 60, I still have it !!).
triggaz said:
+1 with this (also on Paranoid Rom 1.1a) but I think that it's something with the ROM coz on earlier build v1 this method worked verry good I hope that Yank will find a solution coz it reallly helps wit our 576 ram
Click to expand...
Click to collapse
I'm working on the CWM flashable right now, should be done within 1-2 hours at most
Yank555 said:
Hi,
You're welcome
The file '/data/swap.0.log' is a text-file containing info on the execution of the script...
If it's not there, then the script didn't run at all...
I should have a little time later today, will try to make the CWM flashable solution for you, should be a no fuss solution, as long as the sd-card has a swap partition
How did you partition the card ? CWM ?
JP.
Sent from my Android Revolution HD 6.6.5 XE / faux kernel 007b3 powered htc Sensation XE using xda premium
Click to expand...
Click to collapse
Hi JP, once you told me it was the address to the file, i just navigated there using my explorer and lo and behold!, there it was (attached). If you must know, in my earlier post, the idiot in me just typed it in the terminal and the terminal replied not found.
I made my partition using freeware called Minitool partition wizard. Is 500mb too big for swap in your opinion? I was thinking of compensating for zram, and hence the size... thanks for your speedy responses...
edit...
and hey! whadya know? in the meantime, this place is coming alive!!
bullcrapr said:
Hi JP, once you told me it was the address to the file, i just navigated there using my explorer and lo and behold!, there it was (attached). If you must know, in my earlier post, the idiot in me just typed it in the terminal and the terminal replied not found.
I made my partition using freeware called Minitool partition wizard. Is 500mb too big for swap in your opinion? I was thinking of compensating for zram, and hence the size... thanks for your speedy responses...
edit...
and hey! whadya know? in the meantime, this place is coming alive!!
Click to expand...
Click to collapse
Hmm ... strange, the content of the file looks like a logcat ?! Not what I was expecting to see
Give me a little hour, and I think I should be done with the flashable hard-swap and we'll go from there
Minitool is excellent, but did you pay attention to only create "primary" partition ? If it is a logical partition it won't work...
Can you insert your SD card into your card reader, start Minitool an post a print screen of it ?
JP.
EDIT :
About size ... I believe 256Mb is enough, even read somewhere t shouldn't be more than 256, but I think there was no specific reason given.
Yank555 said:
Hmm ... strange, the content of the file looks like a logcat ?! Not what I was expecting to see
Give me a little hour, and I think I should be done with the flashable hard-swap and we'll go from there
Minitool is excellent, but did you pay attention to only create "primary" partition ? If it is a logical partition it won't work...
Can you insert your SD card into your card reader, start Minitool an post a print screen of it ?
JP.
EDIT :
About size ... I believe 256Mb is enough, even read somewhere t shouldn't be more than 256, but I think there was no specific reason given.
Click to expand...
Click to collapse
Here we go...
Minitool image attached... I typically pay attention to the partition type and made sure both of them were primary
About the logcat, I suspect you're right... I was trying to do one from my pc for the first time using adb and tried the only few commands I know (mkswap...), I think that's what you saw then...
Incidentally, do you feel if I reduce the swap size, the script has a better chance at surviving the boot?
bullcrapr said:
Here we go...
Minitool image attached... I typically pay attention to the partition type and made sure both of them were primary
About the logcat, I suspect you're right... I was trying to do one from my pc for the first time using adb and tried the only few commands I know (mkswap...), I think that's what you saw then...
Incidentally, do you feel if I reduce the swap size, the script has a better chance at surviving the boot?
Click to expand...
Click to collapse
Don't bother, I will test 500Mb and let you know if that is the issue
JP.
I have 512mb partition and it worked without problems as I mentioned earlier so I think that opposite to the "size does matter" in this case it doesn't plus I used it with zram from marc1706.
triggaz said:
I have 512mb partition and it worked without problems as I mentioned earlier so I think that opposite to the "size does matter" in this case it doesn't plus I used it with zram from marc1706.
Click to expand...
Click to collapse
Hi triggaz, are you using the built in zram on Para1.1a? Or have you applied a script from elsewhere? I enabled the built-in zram, but get a "not found" reply when i try zram_stats in the terminal. Can you tell me how you got zram working? thanks...
bullcrapr said:
Hi triggaz, are you using the built in zram on Para1.1a? Or have you applied a script from elsewhere? I enabled the built-in zram, but get a "not found" reply when i try zram_stats in the terminal. Can you tell me how you got zram working? thanks...
Click to expand...
Click to collapse
https://www.dropbox.com/s/xr3z102gxiw2f62/marc1706_zram_100MB.zip
all credits to Dorimanx for ZRAM mod and mark1706 for modifications
I flashed this and then used the compcashe options in Paranoid (set to 26%)
Happy new year for everyone here..
First of all sorry if my english bad..
Helo S2 community i'm new here..
i was silent reader in this great XDA Dev-site for a year.. now i'm decide to join XDA for sharing a cool stuff i have for you all.. and for help other too if i can..
i found this script in this page :
forum.xda-developers.com/showthread.php?t=2584862
Credit goes to script maker Souffre..
i only make dev/block mount point to work with our i9100.. i have tested this script and so far working good.. tested binding Real Racing 3 folder and running game without problem.. but for safety make a backup your sdcard content to pc, backup internal & external sdcard, cwm backup too if necessary..
this script will placed to your system/etc/init.d folder
tested with CM11 by infected Nightly 20140101..
Thank you works sweet with resurrection remix
Sent from my GT-I9100 using XDA Premium HD app
brainbeatuk said:
Thank you works sweet with resurrection remix
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
You're welcome my friend, thanks for visiting my thread..
Step by Step
Noriyuki_Fariz said:
Happy new year for everyone here..
First of all sorry if my english bad..
Helo S2 community i'm new here..
i was silent reader in this great XDA Dev-site for a year.. now i'm decide to join XDA for sharing a cool stuff i have for you all.. and for help other too if i can..
i found this script in this page :
forum.xda-developers.com/showthread.php?t=2584862
Credit goes to script maker Souffre..
i only make dev/block mount point to work with our i9100.. i have tested this script and so far working good.. tested binding Real Racing 3 folder and running game without problem.. but for safety make a backup your sdcard content to pc, backup internal & external sdcard, cwm backup too if necessary..
this script will placed to your system/etc/init.d folder
tested with CM11 by infected Nightly 20140101..
Click to expand...
Click to collapse
Hi
Thanks for the script. I'm trying to do the swap on an S2 with SuperNexus but can't paste the script into the init.d folder (I'm guessing permissions). Could you please give me a step by step of how to get the script in and what to do with the META-INF folder?
Thanks
I just flashed thru cwm recovery here is script I pulled. Is supernexus a cm11 build? If no init.d try installing dorimanc go in stweaks app and enable init.d control may help as did for me on linaro cm11.
#!/system/bin/sh
LOG=/data/extsd2.log
echo 'mark 1' > $LOG
umount /storage/sdcard0
umount /storage/sdcard1
umount /mnt/secure/asec
umount /mnt/media_rw/sdcard0
umount /mnt/media_rw/sdcard1
mount -t vfat -o umask=0000,uid=1023,gid=1023 /dev/block/vold/179:9 /mnt/media_rw/sdcard0 1>>$LOG 2>>$LOG
mount -t vfat -o umask=0000,uid=1023,gid=1023 /dev/block/vold/179:9 /storage/sdcard0 1>>$LOG 2>>$LOG
echo 'mark 2' >> $LOG
mount -t vfat -o umask=0000,uid=1023,gid=1023 /dev/block/vold/259:3 /mnt/media_rw/sdcard1 1>>$LOG 2>>$LOG
mount -t vfat -o umask=0000,uid=1023,gid=1023 /dev/block/vold/259:3 /storage/sdcard1 1>>$LOG 2>>$LOG
echo 'mark 3' >> $LOG
mount -t vfat -o umask=0000,uid=1023,gid=1023 /dev/block/vold/179:9 /mnt/secure/asec 1>>$LOG 2>>$LOG
Sent from my GT-I9100 using XDA Premium HD app
CliffMcl said:
Hi
Thanks for the script. I'm trying to do the swap on an S2 with SuperNexus but can't paste the script into the init.d folder (I'm guessing permissions). Could you please give me a step by step of how to get the script in and what to do with the META-INF folder?
Thanks
Click to expand...
Click to collapse
You in SuperNexus 4.0 ? If yes then this script should work.. Just flash in CWM, As far i know stock SuperNexus kernel based on CyanogenMOD kernel (correct me if wrong) so it have init.d support.. Permission is rwe rxe rxe or rwe rwe rwe..
Noriyuki_Fariz said:
You in SuperNexus 4.0 ? If yes then this script should work.. Just flash in CWM, As far i know stock SuperNexus kernel based on CyanogenMOD kernel (correct me if wrong) so it have init.d support.. Permission is rwe rxe rxe or rwe rwe rwe..
Click to expand...
Click to collapse
Yes running SuperNexus 4.0 and it is based on CM11. I can see the system/etc/init.d but I can't work out what to use to get the script into the folder. Also I don't know what to do with the META-INF folder from the zip file.
Thanks for your patience with a Windows geek who is on a steep learning curve
EDIT - DOH!! Root Explorer would have been a good idea.
I've copied the script over, set permissions, ignored thre META-INF and rebooted. SD0 & SD1 swapped successfully
CliffMcl said:
Yes running SuperNexus 4.0 and it is based on CM11. I can see the system/etc/init.d but I can't work out what to use to get the script into the folder. Also I don't know what to do with the META-INF folder from the zip file.
Thanks for your patience with a Windows geek who is on a steep learning curve
EDIT - DOH!! Root Explorer would have been a good idea.
I've copied the script over, set permissions, ignored thre META-INF and rebooted. SD0 & SD1 swapped successfully
Click to expand...
Click to collapse
Glad it work for you.. META-INF not needed if you place script manually, just init.d..
Hi I was wondering if you could make one for my leveno a3000 it is using fuse and has one 13gb partition for internal SD combined. I can get the vold.stab for you to look at if your interested? Please
Sent from my GT-I9100 using XDA Premium HD app
will try bro ....
Sent from my GT-I9100 using XDA Premium 4 mobile app
brainbeatuk said:
Hi I was wondering if you could make one for my leveno a3000 it is using fuse and has one 13gb partition for internal SD combined. I can get the vold.stab for you to look at if your interested? Please
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Will see what i can do.. have you try modify your a3000 vold.fstab before ?
mohaxs said:
will try bro ....
Sent from my GT-I9100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
This for you Bro
1. Tinggal hapus script nya aja gan di system/etc/init.d file nya "swapFIXcm11" lalu reboot
2. kalo ane sih ga ada yg ilang.. cuman seperti yg ane rekomen di trit baik nya backup aja data-data agan yg di rasa perlu.. cuman buat jaga-jaga aja..
nanti gunain trit aja ya gan buat diskusi nya, karena lebih banyak yang bisa bantu agan
No I haven't touched it as I don't have confidence, I hallways break things lol I have pm you the details
Sent from my IdeaTab A3000-F using XDA Premium HD app
brainbeatuk said:
No I haven't touched it as I don't have confidence, I hallways break things lol I have pm you the details
Sent from my IdeaTab A3000-F using XDA Premium HD app
Click to expand...
Click to collapse
Try swap /storage/sdcard0 and /storage/sdcard1 in your vold.fstab using root explorer or notepad , i think it will swap your sd..
Didn't work like that but I found workaround. I mount sdcard1 and didn't mount a 2nd card. Now internal shows 13gb capacity 3.5 free with 33gb app data. So works well I cannot move apps to SD as I think the ROM is made without option. Also titanium backup still shows it as extsd. Anyways thanks for the spur to try it out. I'll see if I can modify your script
Edit: It didn't work as planned my way as it still was downloading internally, I am now back to normal using link2sd and foldermount pro, actually I try move apps to SD using native2sd option in link2sd. App told me native2sd is unavailable as internal SD card is emulated from internal nand. Thanks for ya help though I presume my ROM isn't asop, even in app settings there no option to move to SD, only games like gameloft ever put data there, which I am then bind mounting extsdcard/obb over, only foldertmount can do bind though, my android tuner script doesn't work ever.
Sent from my GT-I9100 using XDA Premium HD app
:crying:
This script was working on slimkat 4.4.2 .. (by slimroms)
now i'm using slimkat 4.4.4 and the script is not working.
nothing happen after reboot the phone
Can someone help me?
Galaxy S2 i9100\slimkat 4.4.4
thats a good script, so usefull
Works fine on NamelessRom KK 4.4.4
This script is perfect for the NamelessRom 4.4.4 KitKat based, Tnx! (i9100P)
Hi i'm glad this script work for you all guys..
Noriyuki_Fariz said:
Happy new year for everyone here..
First of all sorry if my english bad..
Helo S2 community i'm new here..
i was silent reader in this great XDA Dev-site for a year.. now i'm decide to join XDA for sharing a cool stuff i have for you all.. and for help other too if i can..
i found this script in this page :
forum.xda-developers.com/showthread.php?t=2584862
Credit goes to script maker Souffre..
i only make dev/block mount point to work with our i9100.. i have tested this script and so far working good.. tested binding Real Racing 3 folder and running game without problem.. but for safety make a backup your sdcard content to pc, backup internal & external sdcard, cwm backup too if necessary..
this script will placed to your system/etc/init.d folder
tested with CM11 by infected Nightly 20140101..
Click to expand...
Click to collapse
Hi,
I've tried this mod while using xiaomi.eu_multi_GT-I9100_4.9.19_v5-4.4, and it's working flawlessly
Thanks Noriyuki_Fariz for an awesome mod!!