HI guys
im using MiniCM 2.2.0 with nAa 11, but i got reboot fail sometimes. When it reboots, it isnt really reboot and stuck before the nAa icon shows up. Therefore i need to take out my battery and boot the phone again.... is there any solutions for this?
Cnorm said:
HI guys
im using MiniCM 2.2.0 with nAa 11, but i got reboot fail sometimes. When it reboots, it isnt really reboot and stuck before the nAa icon shows up. Therefore i need to take out my battery and boot the phone again.... is there any solutions for this?
Click to expand...
Click to collapse
No, I does have exactly the same problem, I think its caused by kernel panic, and then fails to continue the boot process.
And if you remove the Sdcard you cant boot
It sounds like you have to go back to 2.1 with pccompanion and do all the things from the start.......
Sent from my X8 using xda premium
DevStaffAndroid said:
No, I does have exactly the same problem, I think its caused by kernel panic, and then fails to continue the boot process.
And if you remove the Sdcard you cant boot
Click to expand...
Click to collapse
Thats sad just wait for next update and fixes....
Also thanks for reminding
stamatis16 said:
It sounds like you have to go back to 2.1 with pccompanion and do all the things from the start.......
Sent from my X8 using xda premium
Click to expand...
Click to collapse
really?
but have other got the same problem too
Yap this problem happend to me also on Minicm, No SD Card no Bootanimation ha. Rules Maybe. ha!
Related
Hi i use the stock rom and i am rooted,
when i switch my phone off and then if i plug the charger my phone automatically switches on without showing the battery charging icon in the screen.
someone please help, thanks in advance.
Whit rooted stock rom I had the same problem. (2.1 update 1)
Sience I use CyanogenMod, my phone don't restart.
Sent from my X8 using XDA App
same me after rooted my phone... are u install xrecovery??
Maybe charger problem.
Sent from my X8 using XDA App
topdon2107 said:
Whit rooted stock rom I had the same problem. (2.1 update 1)
Sience I use CyanogenMod, my phone don't restart.
Sent from my X8 using XDA App
Click to expand...
Click to collapse
Yes this does not happen to me when I install CM
pakley said:
same me after rooted my phone... are u install xrecovery??
Click to expand...
Click to collapse
Yes
madsponge26 said:
Maybe charger problem.
Sent from my X8 using XDA App
Click to expand...
Click to collapse
Naa, not charger problem, after installing CM this does not happen.
It is caused by xrecovery. Try to look here maybe it will help you:
forum.xda-developers.com/showthread.php?p=12186828
dbts25 said:
It is caused by xrecovery. Try to look here maybe it will help you:
forum.xda-developers.com/showthread.php?p=12186828
Click to expand...
Click to collapse
Thankyou, so xrecovery is the problem right?
If i uninstall it will it work?
And is the xrecovery offline charging working properly?
maybe....or u install custom rom...
_Sparks said:
Thankyou, so xrecovery is the problem right?
If i uninstall it will it work?
And is the xrecovery offline charging working properly?
Click to expand...
Click to collapse
It worked for me without problem
How do i uninstall xrecovery?
You surely have problem with offline charging...Why to delete xRec? Try to install some of custom rom's, they are more faster and light than stock...If you want to uninstall xRec, delete from System/bin/busybox and System/bin/xrecovery.tar and you will no longer boot into xRecovery, but i don't know if this can help you to turn on offline charging, try different xRecovery, for example from FreeXperia Team.
Hi, first of all I should tell you that I'm not very experienced in rom porting/building in fact I have just basic knowledge of it so I will need help. I'm trying to port an Xperia x10 mini rom to Wildfire. It boots but reboot after a while, I'm trying to fix it. But for now, my Wildfire is on reclamation (broken speaker, not bricked phone ) so I'm not able to try it.
I've choosed this rom for porting http://forum.xda-developers.com/showthread.php?t=1504633 and CM 7.2 RC1 as a base.
Download: http://www.mediafire.com/?k82z19yk6dzhapo
Can somebody make a logcat please? Also every help with this will be welcome.
THIS IS NOT WORKING ROM, ITS REBOOTING FEW SEC. AFTER BOOT!
Was3k said:
Hi, first of all I should tell you that I'm not very experienced in rom porting/building in fact I have just basic knowledge of it so I will need help. I'm trying to port an Xperia x10 mini rom to Wildfire. I've tryied to port this rom before but I have problem with rebooting after a while, I'm trying to fix it. But for now, my Wildfire is on reclamation (broken speaker, not bricked phone ) so I'm not able to try it.
I've choosed this rom for porting http://forum.xda-developers.com/showthread.php?t=1504633 and CM 7.2 RC1 as a base.
Download: http://www.mediafire.com/?k82z19yk6dzhapo
Can somebody make a logcat please? Also every help with this will be welcome.
PS: sorry for my english
Click to expand...
Click to collapse
sounds interesting, but does it boot? or did i missed it
Yes it does but after a while it is rebooting. (Someone told it to me, because I'm not able to try it but he can't make logcat)
Was3k said:
Yes it does but after a while it is rebooting. (Someone told it to me, because I'm not able to try it but he can't make logcat)
Click to expand...
Click to collapse
oh ok, i will see after i installed MIUIV4
Is every thing working on this rom ?
Sent from my still alive, ICS capable HTC Wildfire.
no, its still rebooting after few sec.
If you are able to underclock the device before it reboots, give it a try. Else, do it manually before installing the rom, there are some guides about editing system files.
rayven18 said:
If you are able to underclock the device before it reboots, give it a try. Else, do it manually before installing the rom, there are some guides about editing system files.
Click to expand...
Click to collapse
ill try when i'm on boot manager D:
if sdcard isn't mounted i know what to do lol
Ok then
did the one who tried it use ext4 or ext2 partition, i can see it is available for ext4 too,
this does sometime's doesn't matter, just want to know
i have installed it without partitions and it just rebootes after start.
i dont know how to underclock iz ZIP to try again
nasty007 said:
i have installed it without partitions and it just rebootes after start.
i dont know how to underclock iz ZIP to try again
Click to expand...
Click to collapse
i wasn't able to run it trough boot manager, not even with ext2/ext4
so i guess we need to edit kernel to underclock it, tough my images always fails
cheers, will try this soon
What's the kernel used in this Rom ?
Sent from my CM7 powered Egyptian HTC Wildfire.
lo2ay said:
What's the kernel used in this Rom ?
Sent from my CM7 powered Egyptian HTC Wildfire.
Click to expand...
Click to collapse
i dont know witch kernel it uses.
i have flashed another kernel after installation but it always restarts
lo2ay said:
What's the kernel used in this Rom ?
Sent from my CM7 powered Egyptian HTC Wildfire.
Click to expand...
Click to collapse
Default kernel from WFs CM7.2
So does anyone know how to fix the booting problem
sayemahmed said:
So does anyone know how to fix the booting problem
Click to expand...
Click to collapse
im totally new to this, but im trying, dont know if someone else is working on this
sayemahmed said:
So does anyone know how to fix the booting problem
Click to expand...
Click to collapse
with logcat its hard, but i guess its probably some framework related java files
LastStandingDroid said:
with logcat its hard, but i guess its probably some framework related java files
Click to expand...
Click to collapse
So do I, but it is complicated to fix that without device
I could properley help you if you tell what to do
Share your ROMS switchover experiences?
Sent from my E15i using xda premium
I flashed a new ROM, forgot to full wipe, worst experience of my life
RohinZaraki said:
I flashed a new ROM, forgot to full wipe, worst experience of my life
Click to expand...
Click to collapse
Oh man the terror.
I got that when i first flashed GDX.
I nearly had a heart attack!
-----------------
- Swift -, formerly known as IrishStuff09
I tried every latest releasing ROM.
Use it for a day or two, then flash back to LEWA OS v4
Thing i got in LEWA OS v4 is the Ram cleaning button in the notification widget.
Moreover i got the three buttons by touching the status bar , useful sometimes.
When using some app like UC Browser , you can't minimize it for anything because ram is full and if you minimize it , it closes and do not recover on maximizing.
But in LEWA you can pull Notification bar and clean ram while using the browser and then minimize it.
And this works ....
Flashed minicm9 from GDX, wiped everything except system, took 10 mins to boot, was afraid that boot loop occurred .
Then I installed supercharger and Rohin's tweaks, and it took 15 mins to boot...
Scariest 25 mins in a switchover I ever had...
First custom rom is GingerDX....
it's take 3 month to make decision coz scarred of bricked my X8
RohinZaraki said:
I flashed a new ROM, forgot to full wipe, worst experience of my life
Click to expand...
Click to collapse
The most common error, I think
I flashed a new ROM after repair my phone using Flashtool, but I forgot to change the baseband before
SpyderX said:
Then I installed supercharger and Rohin's tweaks, and it took 15 mins to boot...
Click to expand...
Click to collapse
Sorry
RohinZaraki said:
Sorry
Click to expand...
Click to collapse
Why? Your tweaks sped up ICS so much, it probably saved me 30 hours by now . The only troublesome part is first boot, because I have an odd boot script that does something to newly installed applications, not sure where it came from
And Supercharger deleted my dalvik cache, so I had 170 applications for the boot script :banghead:
Sent from my E15i using Tapatalk 2
So I have a slight problem, I flashed CM 7.2 and its great... but slow... so I started to look at DonutHD and 2.2.9 looked great so I downloaded the files and did everything I should to flash it but it keeps on telling me this when I try to swap:
-- Installing: /sdcard/zzz/JellyBean_1.zip
Finding update package...
Opening update package...
Installing update...
Amend scripting (update-script) is no longer sup
ported.
Amend scripting was depreciated by Google in Andr
oid 1.5
It was necessary to remove it when upgrading to
the ClockworkMod 3.0 Gingerbread based recovery.
Please switch to Edify scripting (update-script
and update-bianary) to create working update zip
packages.
Installation aborted.
Help!
so I flashed the DoomKernel with cm7.2 but now when i start it it takes forever to do anything and gets stuck on the CyanogenMod circle thing and it just stays there, and when I tried to flash another kernel it would not let me plug the phone while holding the back button because it would just turn itself on... any help is greatly apreciated!!! Thank you!!!
Yoshi5005 said:
so I flashed the DoomKernel with cm7.2 but now when i start it it takes forever to do anything and gets stuck on the CyanogenMod circle thing and it just stays there, and when I tried to flash another kernel it would not let me plug the phone while holding the back button because it would just turn itself on... any help is greatly apreciated!!! Thank you!!!
Click to expand...
Click to collapse
I dont run gingerbread and never did on ub.. but try flashign doomkernel formating /system flashing donut then wipe cache and dalvik cache!
Try again using xrecovery gb base kernel and xrecovery not cwm
USB Debugging
mcsqwizzys98 said:
I dont run gingerbread and never did on ub.. but try flashign doomkernel formating /system flashing donut then wipe cache and dalvik cache!
Click to expand...
Click to collapse
How can I do that is the phone won't start to let me turn on USB Debugging?
Yoshi5005 said:
How can I do that is the phone won't start to let me turn on USB Debugging?
Click to expand...
Click to collapse
Hi
did you try to reset the phone to stock Rom with SEUS?
greetings
So I got it to work and what I should have done was find out how to use the new kernel before installing it but fyi for the X10 when the doomkernel logo appears wait for a blue light to turn on as a notification light that is when you go crazy on that back button. But yeah its working and I tell you DonutHD is so much faster than Cyanogen mod (partly from the 1.1ghz vs 1.3ghz overclocked speed, but also the lightness of it)
Sent from my X10i using xda app-developers app
Yoshi5005 said:
So I got it to work and what I should have done was find out how to use the new kernel before installing it but fyi for the X10 when the doomkernel logo appears wait for a blue light to turn on as a notification light that is when you go crazy on that back button. But yeah its working and I tell you DonutHD is so much faster than Cyanogen mod (partly from the 1.1ghz vs 1.3ghz overclocked speed, but also the lightness of it)
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Because you didnt know how to flash cm7 correctly.. yes donuthd is good and fast.. but cm7 is far way better than it.. im using fxp130 cm7 with my own modded kernel for now..
Cheers buddy..
Please press my THANKS Button if i helped you..cheers.
Kaito_Kuroba said:
Because you didnt know how to flash cm7 correctly.. yes donuthd is good and fast.. but cm7 is far way better than it.. im using fxp130 cm7 with my own modded kernel for now..
Cheers buddy..
Please press my THANKS Button if i helped you..cheers.
Click to expand...
Click to collapse
hi kaito, could you tell me how to flash 7 correctly? i want to see how fast is cm7.
Sent from my X10i using xda premium
My Facebook Messenger app and some other apps like Antutu benchmark keeps on blinking. It can he solved by reinstalling the app but it comes back sooner or later. It happened on both Evo x3 and Hyperion 8. Any suggestions or ideas on why is this happening?
________________________________
Many people don't get this but,
Being humble is like the "I win" button in your life.
Same To Me
Any Solution
Rcain said:
My Facebook Messenger app and some other apps like Antutu benchmark keeps on blinking. It can he solved by reinstalling the app but it comes back sooner or later. It happened on both Evo x3 and Hyperion 8. Any suggestions or ideas on why is this happening?
________________________________
Many people don't get this but,
Being humble is like the "I win" button in your life.
Click to expand...
Click to collapse
Imtiaz369 said:
Same To Me
Any Solution
Click to expand...
Click to collapse
I think this is because of savies kernel, I dont know but when I tried this with a rom I was building and was using savies kernel this problem also occurred. Maybe try using another kernel if it still happens, try changing your rom. I don't know.
Sent from my GT-S5360 using xda app-developers app
Is it because of the transparency? Since only some apps blink, while others don't. Could it be something like transparent framework of the rom is incompatible with application's?
________________________________
Many people don't get this but,
Being humble is like the "I win" button in your life.
Rcain said:
Is it because of the transparency? Since only some apps blink, while others don't. Could it be something like transparent framework of the rom is incompatible with application's?
________________________________
Many people don't get this but,
Being humble is like the "I win" button in your life.
Click to expand...
Click to collapse
Nope, I don't think so. I did transparency many times and I didn't see any problem.
Sent from my GT-S5360 using xda app-developers app
month ago i haved the same issue and the only solution was a complete new flash for me,no idea why it was flickering.good luck.
-CALIBAN666- said:
month ago i haved the same issue and the only solution was a complete new flash for me,no idea why it was flickering.good luck.
Click to expand...
Click to collapse
Yes. Its the kernel. The "Flickering" thing. Its a problem in the kernel.
Sent from my GT-I8190 using xda app-developers app
which karnel is good
because i get flickering with percy#9
which karner r u using
Imtiaz369 said:
which karnel is good
because i get flickering with percy#9
which karner r u using
Click to expand...
Click to collapse
I use savies 54. Yeah, I think these new kernels have these problems cause I think they are based on OpenSource 3.
Sent from my GT-S5360 using xda app-developers app
In Savie #54
how long boot up time
And In Percy Thread which karnel have without these problem
Yeah its due to libGLES_hgl.so
In system/lib/egl/......
Try to change this
I think u r using the egl files from cm7.......
I dont know perfectly...
Sorry if i m wrong
Sent from my GT-S5360
LetJect said:
Yeah its due to libGLES_hgl.so
In system/lib/egl/......
Try to change this
I think u r using the egl files from cm7.......
I dont know perfectly...
Sorry if i m wrong
Sent from my GT-S5360
Click to expand...
Click to collapse
No its due to corruption of dalvik cache u can clear via cwm
"Hate Me Till You Can"
fifa2151 said:
No its due to corruption of dalvik cache u can clear via cwm
"Hate Me Till You Can"
Click to expand...
Click to collapse
Ok
Sent from my GT-S5360