Database Users

[How To] Root

TGA_Gunnman created a one click root that new users will want to use, said thread is a sticky in Captivate Development. If you still want to use the old method (and install ADB) please use this one.
I followed my own guide! This works perfectly if you read everything and follow the instructions.
Also: once you are rooted, be EXTREMELY careful! Half of the new threads are people who have screwed up their phones by deleting this or corrupting that. Please, for the sanity of all of the devs and Android veterans, make backups and just be all around careful. Almost all problems that anyone has had are repareable AND PREVENTABLE with a little reading and care. Just to clarify, rooting does not automatically enable sideloading. Please follow http://forum.xda-developers.com/showthread.php?t=738376 to enable sideloading.
Follow these steps exactly and there will be no risk of bricking your Captivate, the worst that may happen is the phone rejecting the update.zip.
HOWEVER:
I take no responsibility if ANYTHING at all happens to your device that you don't like. Don't come crying to me if your brand new phone breaks in any way. Your warranty is also void, but you could have figured that out for yourself.
Now that that's over with, lets get to the fun bit. If you are on Windows, you can follow this procedure, or for TGA_Gunnman's one click root program (only on Windows), you can go ahead and skip to the bottom.
1) You may need Samsung drivers if you are on a PC, which you can learn about here: ADB Drivers at the Unlockr
For 64 bit Windows, you'll need these drivers: http://zedomax.com/blog/2010/07/14/s...iver-download/
Don't proceed until your phone is fully installed on Windows with the drivers!
2) Download the attached zip (at the bottom of the post) and rename it to update or update.zip if you are on a Mac. (If you are on a Mac, DO NOT USE SAFARI to download the file, it automatically unzips any zip file. Use Google Chrome or firefox instead.) Scroll down the notification bar and click "mount" to allow your computer to read the internal memory. Put the file on the INTERNAL SD card of the Captivate, which won't be tough to figure out if you don't have an SD card in the phone.
3) EDIT--There is an easier way to get to recovery, but do this step anyway. Turn the phone off, then hold power, volume up and volume down. If you still want the android SDK (which will be very useful throughout your rooted experiences) follow the old procedure:
This step requires the Android SDK, and Android Debugging enabled. You can get the SDK here: Android SDK. Just download the zip, extract it to something like C:\Android. You won't need the Java dev pack or anything.
You can enable Android Debugging like this: From the homescreen, press Menu, then click Settings. Navigate to Applications>Development and check USB Debugging. Now, hook the phone to the computer. Next,
On a PC, click start>run>"cmd" (in the text box) or on a Mac, spotlight "Terminal". Linux users, you know what to do.
The command you will use is in the tools folder of wherever you extracted it to (IE: C:\android\tools), so be sure your working directory of command prompt is in that tools location!
Finally, type:
Code:
adb reboot recovery
Click to expand...
Click to collapse
4) Once the phone is booted into recovery, use the volume keys on the phone to scroll to "Reinstall packages." Use power to select what you have highlighted.
5) Give yourself a pat on the back. You are now rooted. You should see a Superuser application now.
MD5 Sum: 1eb65923281c113e8751a7d8a6faff43

Can we please have more detailed instructions? I don't understand the part where it says "type in the terminal"
I am very new to android as this will be my first Android phone.
Also, after rooting will we be able to install 3rd party applications? Or do we have to do anything else to bypass ATT's restrictions?

adb terminal is software you need to install on your PC , will probably need samsung drivers also , guide is indeed not noob friendly. This will help you get needed bits including ADB
Probably None of us have captivate , so writing a guide is a bit troublesome

Ditto, a guide to the adb terminal please! I will acquire this phone, this Sunday.

Actually, you'd have to install a custom ROM for that. MoDaCo should be coming out with them pretty soon, and so will XDA. It won't be too long. BTW, once you have ADB installed on your computer, you can sideload apps all you want. The command is
Code:
adb install /directory/of/app/on/computer

point me to some functioning samsung drivers and I can do this!

If you cant get it to work on windows, try a ubuntu live cd. All you need to do is go to ubuntu and burn a disc and reboot.

Are there no Windows 64 bit drivers?
Edit- I found some that work. I think. Haven't tried it (yet).
http://zedomax.com/blog/2010/07/14/...ic-4g-and-fascinate-galaxy-s-driver-download/
Edit 2- Just did the root. Seems to have worked (no errors) but how do I know if it did? How do I delete say, ATT Maps?

Thanks for this. I am new to smartphones and plan on purchasing the Samsung Galaxy-S, but don't want to mess it up. I am new to editing the OS of any smartphone, but I think if I have a tutorial I will be fine

For Mac and Linux you put a ./ in front of the adb correct? (./adb install...)

NOSintake said:
For Mac and Linux you put a ./ in front of the adb correct? (./adb install...)
Click to expand...
Click to collapse
if you are in the directory above yes. the ./ just saves you from writing out the full path
lets say adb is in "/home/user/Downloads/sdk/tools"
you could type out "/home/user/Downloads/sdk/tools/adb command" regardless of where your terminal window was focused
or if you were currently in the directory "/home/user/Downloads/sdk/tools"
you could use the shortcut "./adb command"

OP I'd change your post based on my experiences... Here's a little more detail and I've rearranged it (you need the drivers before running these commands, for example).
blackjackboy said:
Please let me know if this rooting method works as I have no Captivate to test on. I'm not taking any credit for any of these files, LeshaK made the original file to root the European Galaxy S, Justadude modified it for the T-Mobile Vibrant and chaoscentral edited the file for use on the Captivate.
Follow these steps exactly and there will be no risk of bricking your Captivate, the worst that may happen is the phone rejecting the update.zip.
HOWEVER:
I take no responsibility if ANYTHING at all happens to your device that you don't like. Don't come crying to me if your brand new phone breaks in any way.
Now that that's over with, lets get to the fun bit.
1) You may need Samsung drivers if you are on a PC, which you can learn about here: ADB Drivers at the Unlockr
For 64 bit Windows, you'll need these drivers: http://zedomax.com/blog/2010/07/14/...ic-4g-and-fascinate-galaxy-s-driver-download/
Don't proceed until your phone is fully installed on Windows with the drivers!
2) Download the attached zip (at the bottom of the post) and rename it to update or update.zip if you are on a Mac. Scroll down the notification bar and click "mount" to allow your computer to read the internal memory. Put the file on the INTERNAL SD card of the Captivate, which won't be tough to figure out if you don't have an SD card in the phone.
3) This step requires the Android SDK, and Android Debugging enabled. You can get the SDK here: Android SDK. Just download the zip, extract it to something like C:\Android. You won't need the Java dev pack or anything.
You can enable Android Debugging like this: From the homescreen, press Menu, then click Settings. Navigate to Applications>Development and check USB Debugging. Now, hook the phone to the computer. Next,
On a PC, click start>run>"cmd" (in the text box) or on a Mac, spotlight "Terminal". Linux users, you know what to do.
The command you will use is in the tools folder of wherever you extracted it to (IE: C:\android\tools), so be sure your working directory of command prompt is in that tools location!
Finally, type:
Code:
adb reboot recovery
4) Once the phone is booted into recovery, use the volume keys on the phone to scroll to "Reinstall packages." Use power to select what you have highlighted.
5) Give yourself a pat on the back. You are now rooted. You should see a Superuser application now.
Thank you to LeshaK, Justadude, and chaoscentral. Once again, I didn't discover how to root, that credit goes to LeshaK, bringing it over to the USA was Justadude's doing, and chaoscentral edited the file for use on our Captivates.
MD5 Sum: 1eb65923281c113e8751a7d8a6faff43
Click to expand...
Click to collapse

Ubuntu 10.04 - adb
Any step by step instructions just to get adb running enough on 10.04 to root and side load software? I'm getting command not found when I try to run adb, even after downloading packages.

Hi,
Did this thread worked well to Root the Captivate or anyother suggested link? I'll appreciate any help.
Thanks

rerooting captivate
This worked perfectly on my Captivate. I now have the SuperUser Permission on my application screen. Now I can REALLY screw up my Captivate!!!

Thanks for the answer & More Queston
cellgeek said:
This worked perfectly on my Captivate. I now have the SuperUser Permission on my application screen. Now I can REALLY screw up my Captivate!!!
Click to expand...
Click to collapse
Hi,
Thanks for your helpful answer. As I'm getting my Cativate tomorrow, can you please just answer yes or no to each of my questions as follow ?
After Rooting will I be able to:
1- download any 3rd party Android application?
2- install any "Samsung Galaxy S" ROM on my Captivate?
3- Recieve any "OTA" update as a "Galaxy S" phone?
Thanks again

Muhamadabdelaall said:
Hi,
Thanks for your helpful answer. As I'm getting my Cativate tomorrow, can you please just answer yes or no to each of my questions as follow ?
After Rooting will I be able to:
1- download any 3rd party Android application?
2- install any "Samsung Galaxy S" ROM on my Captivate?
3- Recieve any "OTA" update as a "Galaxy S" phone?
Thanks again
Click to expand...
Click to collapse
1. No. You will have to use adb or the database modification method (which having root access makes possible). Both are described in detail elsewhere in this forum.
2. Rooting means simply getting superuser permissions. Loading a ROM has to do with the bootloader and recovery partition. Unmodded Galaxy S ROMs probably will not work on the Captivate, but be patient.
3. Not sure what you're asking. You will still get any Captivate OTA updates as if you hadn't rooted, but you won't get, for example, the rumored Korean FroYo Galaxy S update OTA when it drops. You'd have to wait for the Captivate OTA FroYo upgrade (or there may be a ROM or patch you can flash by then).
Rooting is basically just allowing programs to run as the superuser account. Many programs like Metamorph, some screenshot apps and some wifi tethering apps require more permission than Android normally gives an app.

Thanks Drachen
Drachen said:
1. No. You will have to use adb or the database modification method (which having root access makes possible). Both are described in detail elsewhere in this forum.
2. Rooting means simply getting superuser permissions. Loading a ROM has to do with the bootloader and recovery partition. Unmodded Galaxy S ROMs probably will not work on the Captivate, but be patient.
3. Not sure what you're asking. You will still get any Captivate OTA updates as if you hadn't rooted, but you won't get, for example, the rumored Korean FroYo Galaxy S update OTA when it drops. You'd have to wait for the Captivate OTA FroYo upgrade (or there may be a ROM or patch you can flash by then).
Rooting is basically just allowing programs to run as the superuser account. Many programs like Metamorph, some screenshot apps and some wifi tethering apps require more permission than Android normally gives an app.
Click to expand...
Click to collapse
Thanks alot for taking all this time & energy to reply to me! WOW, it seems like everytime I wanna step up one, I go back 10 steps. All I need is to use my Captivate for installing a Stock Rom of "Galaxy S" & be able to get rid of any "AT&T" restrictions for anything on this phone, what should I do please?
Thanks

Muhamadabdelaall said:
Thanks alot for taking all this time & energy to reply to me! WOW, it seems like everytime I wanna step up one, I go back 10 steps. All I need is to use my Captivate for installing a Stock Rom of "Galaxy S" & be able to get rid of any "AT&T" restrictions for anything on this phone, what should I do please?
Thanks
Click to expand...
Click to collapse
The ATT stuff doesn't actually run so they aren't a big deal at this point. I also don't see Amazon MP3 background stuff like some Android devices have, so... There's really not a huge case for rooting yet.
That said, when Custom ROMs for this come out I'll still be getting one.

For those of you having a hard time installing ADB Shell, try this video. It worked for me.
http://www.youtube.com/watch?v=YeWH6Bj1DYw&feature=related

[Q] Question about the Terms..

Hi, I am looking to root my MT4G.. but I always see "root at your own risk" etc... Well, I am ready to root at my own risk, however I don't really know enough to want to attempt thsi yet.. so I am looking for a general thread explaining what this stuff is and how it is explained..(definitions for commonly used terms and acronyms..) someone please point me somewhere.... Thank you.

I have been looking for a thread that answers these questions I have and I haven't found one in about a week, so I posted this...however I literally just found one, that I think answers most of my questions @ http://forum.xda-developers.com/showthread.php?t=859446&highlight=guide sooo any MOD please close or delete my thread, and I am sorry for wasting your time.

I used grankin01's instructions...
I know there's a lot of info out there, especially if you just search for "root." It can be a bit daunting at first, especially if you're not oriented properly.
I have rooted 3 MT4G's using the following guide by grankin01...
http://forum.xda-developers.com/showthread.php?t=834225
It really can't be any easier. I started out on a G1 and rooting was not this easy back then. To paraphrase grankin01's instructions (please read his instructions carefully and do this at your own risk)...
1. Download and install VISIONary
2. Extract that root.rar file to your sdcard. This is where a lot of people got messed up. There's a 'root' folder within a 'root' folder 'cause the person who originally .RAR'd these files, RAR'd a 'root' folder. Basically, when all is said and done, you should have a folder named 'root' on your SD Card. Within the 'root' folder, will be 3 files - hboot_dhd.nb0, Root.sh & wpx.ko.
3. Run VISIONary and click Temproot now - you now have temporary root access
4. Download and run Terminal Emulator and execute the commands outlined in grankin01's post. You will be prompted to restart. Once your phone boots back up, run VISIONary again only this time, click Attempt permoot now. Your screen will go black and eventually, the phone will reboot.
On two occassions, when I was doing this on replacement MT4G's I received, I forgot to enable USB Debugging. I found that VISIONary would just spin its wheels at the Temproot portion. After rebooting the phone and trying again, VISIONary actually prompted with an error to let me know USB Debugging had to be enabled. Totally my fault, but the app just spins its wheels at first, so you don't really know what's up until you reboot and try again.
To recap:
- VISIONary temproot
- Commands outlined in grankin01's post
- VISIONary permroot
It really is quite easy to do! If anything, there are plenty of redundant posts that explain how to get root access. I hope my info above doesn't add to the mire.

shlongwoodian said:
I know there's a lot of info out there, especially if you just search for "root." It can be a bit daunting at first, especially if you're not oriented properly.
Click to expand...
Click to collapse
I think that is why I posted this... Because I have been searching but I don't know what exactly to search for, or what step to do such thinigs in...I appreciate the help. I am currently following the s=off perma root guide, however I am struggling at getting my ADB drivers installed correctly....sooo I have some tinkering to do but I am looking forward to rooting my phone, and I don't even know what that is gonna open up..CANT WAIT!!!
EDIT: I checked out your link, and I am using a guide written by him, i believe, but it is the one that is a little more complex, and causes a deeper perma root...

For the ADB drivers just look on the sdcard that came with your phone. There should be a file named HTCDRIVER.EXE. Just copy that to your windows desktop and execute it. It will install the drivers you need. As for linux, my Kubuntu 10.10 installation saw my phone without any problems or driver installations.
The new guide with the "deeper" root actually is the better one to follow. Its really not as complicated or difficult as it looks.

grankin01 said:
For the ADB drivers just look on the sdcard that came with your phone. There should be a file named HTCDRIVER.EXE. Just copy that to your windows desktop and execute it. It will install the drivers you need. As for linux, my Kubuntu 10.10 installation saw my phone without any problems or driver installations.
The new guide with the "deeper" root actually is the better one to follow. Its really not as complicated or difficult as it looks.
Click to expand...
Click to collapse
Freaking awesome...in sitting here at work not looking forward to going home to another wasted two hours trying to set the driver up you just saved my day with that info about the driver...you sure it has the adb driver though..?
Sent from my HTC Glacier using XDA App

Jaskwith said:
Freaking awesome...in sitting here at work not looking forward to going home to another wasted two hours trying to set the driver up you just saved my day with that info about the driver...you sure it has the adb driver though..?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Yeah, I had to install it for adb to work on my windows installation and it has saved several other people heartache too.

Ughhhh.. just found out I work at job #2 tonight...how FREAKING lame...like I wasted ALL my freetime not being able to figure it out last night and now that I think I know what to do... I have NO time...BLAH!!

Okay, so my ADB **** is still not working... I don't know why.. I am following the guide over at theunlockr.com and it still won't work.. I installed the SDK from google... I didnt DL the archives however... and then I installed the drivers off my SD card onto my computer, and when I open the Command prompt and type cd\ cd AndroidSDK\tools\ it says the directory does not exist... it says on the unlocr guide to try installing PDAneT and that might help, and so i did that as well, still says directory does not exist...ARGH this is frustrating!

Do you need perma root to boot into recovery?

I would just follow the visionary method so you won't even have to bother with adb. Just use root explorer to copy and past the files into the right directory. Did it on the bus, took me 5 minutes. No need to get true/deep root especially for someone just starting off. I promise, for all you'll be doing (and a hell of a lot more) you'll NEVER know the difference. Just gives you more options to screw up your phone. Start with perm root (set up the easy way), flash a rom or two, mess around with some cool apps for root users, figure out adb, and then work your way up to messing with the deeper system stuff (if you still feel need).
Just my 2¢
Sent from my HTC Glacier using XDA App

It sounds like you are looking in the wrong directory. Open your file browser and do a search for adb and pay attention to what folder it is in. My installation had like two subdirectories before I could even get to the tools directory on my windows drive.
That is if you still want to try adb. It is a valueable thing to learn. Espescially if your going to be doing these kinds of things to your devices. It can take a brick and turn it back into a phone if you know how to use it.

Thank you kind sirs you are very helpful to a pour nub such as myself...well it seems like I dont havr any freaking time ever so I think I might take c_licious's advice for now and read up on adb some more...i did see that in the thread its easy to convert from the perma root to the deep perma root so think that's what ill do. Thank you grankin for the tip on finding adb drivers that will definitely come in handy when I get to that. Yayyyyy!!!!
Sent from my HTC Glacier using XDA App

easyroot+S-off mac/linux

I have made a script of the most popular guide for rooting the Thunderbolt right now.
http://www.androidpolice.com/2011/0...he-htc-thunderbolt-and-unlock-its-bootloader/
Long story short, I have not tested this enough to guarantee it will work for everyone. It can run on both Mac and Linux, and only requires that curl is installed (by default on Mac, and most Linux distros). I have made absolutely sure that the script did not run anything what-so-ever that is damaging without letting you verify that you want to continue several times.
Please only test at this time if you know your way around adb, and are willing to run into non-damaging issues (it may fail, but I assure you, no damage is done)
usage
Make sure the phone is plugged in and adb is installed and working, and device is showing. Start a terminal IN the adb directory and put this script in there. Start it as usual in a terminal? (rename oneClick.txt to oneClick.sh)
Both AndroidPolice & AndIRC are nor affiliated with this root process or responsible for it.

has anyone tested this? i have a mac but am not experienced in adb...was going to give it a shot when i got off work today.
@kdb424, is there some way you could provide more detailed instructions for adb noobs? if not, i'll try dbzfanatic's easy root or attempt this after learning adb myself first.

First off, thanks andrew8806 for doing that edit. I knew I had missed something.
Second, the only thing you should have to do on a mac to verify this is going to work is make sure adb is installed, and make sure your device comes up in adb devices.
If that's good, all you need to do is open a terminal and type "cd " and drag and drop the folder that adb is installed into (depending on where you installed it, it could be different or I'd just type it) then put the script in there and run
sh ./oneClick.sh
and follow the instructions in the script.

will this still wipe data?

Yes, absolutely. Long story short is that it requires that an old build be flashed on your phone so that can be hacked. It's the only know method of rooting now. All one clicks are just abusing that and simplifying as much as possible.

just got done rooting with my macbook pro. the script kdb424 wrote worked really well. there were a few hiccups along the way, not sure if they were from my terminal glitching or the script or my phone or whatever, but it worked, flashing clockworkmod right now to change the ROM.
for anyone curious, sometimes the script would just stop because some command missed or something. i would just edit kdb424's script to remove the portion that i already completed and rerun the script essentially starting it up again wherever it messed up. at the end i ran the last few lines myself but overall it was quite helpful to root, especially for someone new to ADB like me.

bkiminfinity said:
just got done rooting with my macbook pro. the script kdb424 wrote worked really well. there were a few hiccups along the way, not sure if they were from my terminal glitching or the script or my phone or whatever, but it worked, flashing clockworkmod right now to change the ROM.
for anyone curious, sometimes the script would just stop because some command missed or something. i would just edit kdb424's script to remove the portion that i already completed and rerun the script essentially starting it up again wherever it messed up. at the end i ran the last few lines myself but overall it was quite helpful to root, especially for someone new to ADB like me.
Click to expand...
Click to collapse
Thank you so much. I'm glad to hear success. I know ADB has some issues that I can not resolve. It's the same no matter how you root. Do you remember what portions gave you trouble specifically? I could take a closer look at it and iron hose things out. Once again, thanks again, and glad I could help!

Willing to try this once things get ironed out.

kdb424 said:
Do you remember what portions gave you trouble specifically? I could take a closer look at it and iron hose things out. Once again, thanks again, and glad I could help!
Click to expand...
Click to collapse
all of the md5 sums and outputs were correct so there were no brick possibility i think. if i recall correctly, sometimes pushing the PS05IMG.zip would not execute properly and the script would not continue until i reran it. i think that might've happened with both the downgrade and the s-off one, can't say for certain. some parts that hiccuped may have just been my tbolt needing extra reboots so i don't think that was the script's fault. towards the end i would just run the lines myself, i think i had to redo the ./adb shell /data/local/psneuter line the most before it took properly. i believe that was it, like i had said it was quite helpful and greatly expedited the rooting process.

Im expierienced with ADB and I have a mac. Will be trying this out now. Reporting back soon.....
Edit (after using scipt)
While the script is great, the end just turns into a #failfest. It refuses to the final file to my SD card and sites that its read only. The end I am doing manually. The rest of the script is amzing and gets a A+

Thank you so much for your feedback. I'll be looking into that. If I come up with any typos in the script, I'll update and let you know. ADB is known to act odd at times, so it may be pure ADB's fault. Definitely taking a look into though,. Enjoy your root!

I just got root using the OG method on my mac and it was a PITA. I think the big thing to know is you can use every step listed by jcase, but you need to use ./adb instead of JUST adb.
After completing root the long way, I imagine this would expedite things exponentially.

[Q] Using fastboot.

So I am not quite sure what exactly fastboot is supposed to do. I know you can flash recoveries, bootloaders, etc with it but that is about it for my understanding.
I tried to get into fastboot (following instructions here on the forum) mode earlier today and while the tablet gives me the fastboot message in the upper left, windows says that fastboot failed. Is there a folder I am supposed to be running cmd prompt from?
Sorry, still new to this stuff and my understanding of some of these tools is limited at best.
Sent from my A500 using Tapatalk 2

a friendly warning
CyaN1de said:
So I am not quite sure what exactly fastboot is supposed to do. I know you can flash recoveries, bootloaders, etc with it but that is about it for my understanding.
I tried to get into fastboot mode earlier today and while the tablet gives me the fastboot message in the upper left, windows says that fastboot failed. Is there a folder I am supposed to be running cmd prompt from?
Sorry, still new to this stuff and my understanding of some of these tools is limited at best.
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
Give me 30 mins got all the reading u gonna need b4 u make an attempt
if u fk up in here there is definitely NO WAY BACK in meantime you'll
Want to set adb as environmental variable in windows gonna make it
Helluva lot easier . Android sdk will too. f u don't know what I'm on About..
.best do some reading up on these as well.
Fast boot ain't something someone else can talk u thru and I doubt the devs will
Have any sympathy for anyone asking ....i bricked my tab pls help....

dibb_nz said:
Give me 30 mins got all the reading u gonna need b4 u make an attempt
if u fk up in here there is definitely NO WAY BACK in meantime you'll
Want to set adb as environmental variable in windows gonna make it
Helluva lot easier . Android sdk will too. f u don't know what I'm on About..
.best do some reading up on these as well.
Fast boot ain't something someone else can talk u thru and I doubt the devs will
Have any sympathy for anyone asking ....i bricked my tab pls help....
Click to expand...
Click to collapse
Running adb from its native folder is not an issue.....is fastboot the same way having to run cmd from folder that a file is located?
I prefer not to mess stuff that I do not fully comprehend (not that I fully comprehend ANY of this) but some of it makes more sense once you are into it rather than reading someone elses interpretation.
Sent from my A500 using Tapatalk 2

CyaN1de said:
Running adb from its native folder is not an issue.....is fastboot the same way having to run cmd from folder that a file is located?
I prefer not to mess stuff that I do not fully comprehend (not that I fully comprehend ANY of this) but some of it makes more sense once you are into it rather than reading someone elses interpretation.
Sent from my A500 using Tapatalk 2
Click to expand...
Click to collapse
yeh just a group of extended adb commands that allow you to do some pretty awesome stuff - like really, really bricking your tab for instance, lol. I'm unsure as to whether all the fastboot commands are available to us - i havent had enough spare time to devote to heavy duty reading in the Dev Forums!!!! You can flash everything in here so its like a supercharger;;;;Sort of like going from timmydeans EUU root to Civ's nvflash unlocking bootloaders thing, if you know what i mean.......
But heres some reading, most of it tutorial step by step stuff, mostly for other devices which may not apply to our tab but definitely apply to fastboot. AS you know, there is alot of info in our own dev forum but its hard to find a flow as the devs actually speak a different language to us!!!! So the tutorials are quite good in that respect as they use noob-ite speak
the backup and restore tute is a goody, couldnt get it going on v3 so looking forward to giving it a go on v4 (when i can find a quiet 30 mins or so, that is)
anyways happy reading be interested in your thoughts and keep us posted about what you get around to trying
rgds
Full Phone Backup http://forum.xda-developers.com/showthread.php?t=1420351
setup adb http://forum.xda-developers.com/showthread.php?t=1249798
adb http://forum.xda-developers.com/showthread.php?t=879701
adb logcat http://droid-force.com/showthread.php?tid=150&pid=573#pid573
ics BL by Skrilax_CZ http://forum.xda-developers.com/showthread.php?t=1514951

So I located Fastboot in D:\Android\android-sdk\platform-tools\Fastboot.exe
But putting tablet into fastboot mode yields the driver installer to report that "Device driver software was not succesfully installed".......Fastboot X Failed....is this normal? Will it run when I use cmd prompt from D:\Android\android-sdk\platform-tools?
I guess a little linux knowledge would go a long way.....too bad I can't get a grasp on that either.
Thanks for the links.....hopefully I can find time to give a read.

Set up adb/fastboot for noob-ites 101
CyaN1de said:
So I located Fastboot in D:\Android\android-sdk\platform-tools\Fastboot.exe
But putting tablet into fastboot mode yields the driver installer to report that "Device driver software was not succesfully installed".......Fastboot X Failed....is this normal? Will it run when I use cmd prompt from D:\Android\android-sdk\platform-tools?
I guess a little linux knowledge would go a long way.....too bad I can't get a grasp on that either.
Thanks for the links.....hopefully I can find time to give a read.
Click to expand...
Click to collapse
weird??? i kicked straight in to bl, fastboot drivers installed, never saw red x
u mean u arent cmd from platform tools???
in the cpuid guide I suggested extracting the just_adb.zip into C:\ so setting
up the env. var. would be easier I have been meaning to post the steps for
doing that, guess theres no time like the present
Set adb as Environment Variable or call adb direct from command prompt
............ first, copy the path to your install - in your case:
............ "Path to adb" = D:\Android\android-sdk\platform-tools
1. Click on the Start menu
2. Right click on Computer
3. Click on Advanced system settings
4. Click on the Environment Variables button
5. Look for Path in the System Variables section. Double click on it
6. Go to the end of the Variable value box and put in a semicolon ;
7. Now paste your "Path to adb" after the ;
8. it should look like this in your case ;D:\Android\android-sdk\platform-tools
9. Now test it out - start - run/search - cmd - in cmd window type: adb devices
10. If you've followed the steps you will see your device ID - voila!!!!
as you can see this makes trouble shooting so dam easy -
if you cant get a device id do not go any further in what u r doing
cos it aint gonna work....period!!!!! also since ICS has screwed
with getting our cpuid like this, for our purpose here, it is only important
that a device id is shown - not how right or wrong it is.....clear????
so getting back to it, check fastboot*.exe in same folder as adb.exe -
it came like this in my own setup not sure about the asdk setup -
remember too fastboot only has a few commands and i still havent
got round to trying them all out yet....
to anyone following this, I cannot say enough how dangerous this can be
please, please, please take a moment to read thru just one of the links i
posted earlier - they are tutorials and if you see the dev thread regarding
v4 unlock...you will not only learn something amazing but begin to
appreciate and respect the work done by these devs who laid the groundwork
that enabled civato and blakthund3r to produce what they have with the
unlocked bootloader - without this groundwork we would still be waiting
for a way to get full root access and cwm, custom roms, themes and mods......

Thanks for that
Seems my Windows skillz need brushing up on again too....LOL
C:\Users\username>adb devices
List of devices attached
11717XXXXXX device

CyaN1de said:
Thanks for that
Seems my Windows skillz need brushing up on again too....LOL
C:\Users\username>adb devices
List of devices attached
11717XXXXXX device
Click to expand...
Click to collapse
sweet m8 -
yeh whoever thought windoze would actually be useful!!!!
which i guess is freakn handy as having to go linux would spin me out....
what can i say??? I'm a child of windoze had no choice, forced-addiction
before i was born, lol - breaking the habit, but always go back, goddamit

OK....I get the adb ok.
But when I put tab into FB i get the driver error (see attachment). I suppose that I should not be getting this?
Trying just "fastboot reboot" (not wanting to go any farther until I get a grasp...HAHA) I get "waiting for device"

CyaN1de said:
OK....I get the adb ok.
But when I put tab into FB i get the driver error (see attachment). I suppose that I should not be getting this?
Click to expand...
Click to collapse
dont let windows install
choose let me choose where to install dunno exact wording

Does not give me a choice.
Driver is located at D:\Android\android-sdk\extras\google\usb_driver ???
This is making my head hurt....LOL

CyaN1de said:
Does not give me a choice.
Driver is located at D:\Android\android-sdk\extras\google\usb_driver ???
This is making my head hurt....LOL
Click to expand...
Click to collapse
Yr head hurts????
Ive updated the cpuid guide u my wanna take 5 min timeout to read it, the answers r all in there
I don't use full sdk there's a link to mini sdk zip in that post just has ad and fast boot
I've never had to use google drivers
Just plugged my tab in and its just 'worked'
DL Acer drivers if u haven't already . These are the most important ones to have installed right.
Disconnect and reboot everything
Run Acer setup.exe
Plug USB in
Go into fast boot, win doze will want to install f/b drivers let win doze do it, but if they fail, then run again and choose let me install, blah, blah, blah
What OS u got? Vista/win 7 don't normally have any probs

Acer drivers have been installed and all relevant sdk packages installed and up to date AFAIK. (USB_Acer_1.06.1500_A30HA31H_A.zip)
Had no issues installing ICS Bootloader V.3 manually through APX (no auto script) via instructions so I know I can at least do that well.....LOL
Might have to try reinstalling USB drivers and see if that helps.
Thanks
EDIT: Reinstalled USB Drivers now I can't get adb working....F#@K!!!!!!!!!
EDIT II: Re-Re-Installed Drviers and ADB working again...yay...LOL
EDIT III: Used A500_Manager.exe, clicked on "Enter Fastboot" and windows installed and recognized drivers......DBL YAY!!!!
C:\Users\username>fastboot reboot
rebooting...
finished. total time: 0.165s
Now.......to Brick this puppy.....
Thanx for your help dibb_nz....looks like all I needed in the first place was a driver reinstall...HAHA.

Hek m8 for a second or two there, I was feeling ya pain, lol
Oh but the elation when it finally happens!!!!!
I dunno why those drivers act out like that, but it always the same....
Fail, reinstall, fail, reinstall u can understand why peeps get frustrated
Glad u got it m8

UK Nook Glowlight software 1.2.0 - Don't use glownooter

I got a uk glow worm on the 27th (2 days before release ) and one of the first things that I tried to do was to root with glownooter. Bad idea! I thought that I had bricked my device. I had to use a lot of trickery to recover from a loading screen lock-up and once I did the first thing that I did was backup my nook (Which i should have done before).
UPDATE!
Please try my new ROOT install pack HERE:
http://forum.xda-developers.com/showthread.php?p=34216660#post34216660
This can be used to root and install the most requested things of this thread in just one zip.
Here is a quick guide to most things you will need to do to get started. I will update this guide as I discover and build new modifications.
To Backup and Restore
Follow this guide. Please do this BEFORE any other tinkering!
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
Its important to check your backup before proceeding! Please listen to roustabout and dont skip this step... He knows what he's talking about
roustabout said:
I'd like to suggest an addition to the backup method that many folks are using - always test your restore, but dont test it (the first time) on your device.
Your backup file should be about 2 gig.
find a 2 gig or larger flash drive or sdcard and restore your backup image to that drive.
when you're done, there should be 8 partitions, as there were on your Nook to begin with.
If you can't get that working - you're not ready to root yet. Until you're sure you can restore, don't start making changes, please.
People turn up all the time having screwed themselves over by restoring a partial backup and not knowing it, or having restored only one partition from a complete backup and having blown out the partition table.
Click to expand...
Click to collapse
Thanks roustabout
To Root!
Make sure you use the CWM file suitable for your SD Card. I used "2gb_clockwork-rc2" because my card was 2gb+.
http://forum.xda-developers.com/showthread.php?t=1360994 (Thanks mali100)
Use WinImage with admin rights to restore CWM virtual hdd image to your SD.
Download tinynoot-1-of-2 and tinynoot-2-of-2
http://forum.xda-developers.com/showthread.php?t=1650593 (Thanks to eded333 and roustabout)
Put on CWM boot SD.
Install them in CWM back to back (I didn't bother with the restart in the middle as it should not make a difference considering the file content). After a restart you should have root access and an android launcher on your 1.2.0 Nook (among other files). If nook fails to boot one of the tinynoot files may have corrupted. Recover, Re-download and Retry!
To Add Apps
Using ADB to install apps is easy. Extract this to your C drive:
http://dl.dropbox.com/u/13673492/ADB + Fastboot + Drivers.zip
Navigate to the folder in a cmd prompt.
Drop your APK into the same folder and on your nook open the "adbwireless" app and enable ADB
That app will tell you what your nooks IP address is.
Then you can:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
Setup ADB over USB
OK I have taken the liberty of building a quick driver mod to support your nook through USB. It works for me. First you need to have the android SDK if you don't already (sure you do but just in case ).
http://developer.android.com/sdk/index.html
Make sure you tick to install the android USB driver when the SDK is installed.
Browse to extras\google\usb_driver in your SDK folder (wherever you put it) and replace android_winusb.inf with my file:
http://dl.dropbox.com/u/13673492/android_winusb.inf
Next go to C:\Users\your_user_account\.android and replace adb_usb.ini with my file:
http://dl.dropbox.com/u/13673492/adb_usb.ini
In device manager, point google ADB driver to this and hopefully that should get you set up!
To test type
Code:
adb devices
Its working if you get something like this:
Code:
* daemon not running. starting it now on port ____ *
* daemon started successfully *
List of devices attached
[YOUR NOOK] device
And then try
Code:
adb install app_of_your_choice.apk
UPDATE
Install Multitouch Kernel With Overclocking
Install the CWM zip using your clockworkmod SD card
http://forum.xda-developers.com/showthread.php?t=1906507
:good: Thanks to johnjtaylor for discovering that this kernel works works.
Hopefully this more comprehensive guide will get others with this software to start playing around.
If this helps, be polite and say thankyou

Have you setup ADB yet? If you can connect with ADB and get a shell, you can execute a 'df' at the shell prompt to see how much free space is available in each partition. On my NST (no glowlight) apps seem to be installed in /data/app so see how much free space is there. On the NST, this appears to be the same partition that books purchased from B&N are placed in, so if you have a lot of books from B&N, you may have to archive some to install apps. Of course all this is going on the assumption that the NST Glow is similar to the NST in this regard.

David0226 said:
Have you setup ADB yet? If you can connect with ADB and get a shell, you can execute a 'df' at the shell prompt to see how much free space is available in each partition. On my NST (no glowlight) apps seem to be installed in /data/app so see how much free space is there. On the NST, this appears to be the same partition that books purchased from B&N are placed in, so if you have a lot of books from B&N, you may have to archive some to install apps. Of course all this is going on the assumption that the NST Glow is similar to the NST in this regard.
Click to expand...
Click to collapse
Thanks for replying. I'm actually working setting up ADB now. As for books I only just got my nook so all of my titles are epub format on an sd card so i wouldn't think it would be that. As soon as I get ADB set up I will post back my results incase it helps anyone else with this new software version.

Can you look in the documentation that comes with the reader for any reference to 'third party software' or 'GPL software'. They should list where to download / apply for the source code somewhere. Once we can see the source code we can compare it against the existing versions and identify any significant issues.

I set up ADB.
Plenty of space in all partitions including /data for the apps that I want. Managed to install through "adb install some_app_i_want.apk" so problem resides with the amazon app store. Not really an issue for me because I have a specific set of apps that I want and don't need to browse the app store.
I will try to work out what's wrong for others.

staylo said:
Can you look in the documentation that comes with the reader for any reference to 'third party software' or 'GPL software'. They should list where to download / apply for the source code somewhere. Once we can see the source code we can compare it against the existing versions and identify any significant issues.
Click to expand...
Click to collapse
Thanks. I'm looking for it now

No reference to GPL. Only references to third party software are to tell me that my warranty is no longer valid (no surprise there!)
Is there any other place I can find this info thats not the documentation?

loney01843 said:
No reference to GPL. Only references to third party software are to tell me that my warranty is no longer valid (no surprise there!)
Is there any other place I can find this info thats not the documentation?
Click to expand...
Click to collapse
Nothing obvious from the uk.nook.com website. On the US site the 'support' section links to terms of service which contain the links to the open source code (see http://www.barnesandnoble.com/container/nook_lnav.asp?pid=43307 and search for NOOK 1.1.5 OSS Release ), but I can't see an equivalent on the UK site. It's an oversight, but such things happen with a new product launch.
You can email them at [email protected] . The relevant paragraph from the US site is:
1. Notwithstanding anything to the contrary in this Agreement, certain components of the Software are licensed subject to the General Public License Version 2.0, a copy of which is attached as Exhibit A (the "GPL License"). You may not use these components except in compliance with the GPL License. In addition, you may have additional rights with respect to such components under the GPL License, including, without limitation, the right to obtain the source code for such components from us. You may obtain a copy of such source code by contacting us through the contact information provided on the Web Site. We will provide such source code in accordance with the GPL License.
I don't legally have the right to request the source code myself, because I don't own a UK NOOK yet. (Yeah, thinly veiled excuse for laziness!)

staylo said:
Nothing obvious from the uk.nook.com website. On the US site the 'support' section links to terms of service which contain the links to the open source code (see http://www.barnesandnoble.com/container/nook_lnav.asp?pid=43307 and search for NOOK 1.1.5 OSS Release ), but I can't see an equivalent on the UK site. It's an oversight, but such things happen with a new product launch.
You can email them at [email protected] . The relevant paragraph from the US site is:
1. Notwithstanding anything to the contrary in this Agreement, certain components of the Software are licensed subject to the General Public License Version 2.0, a copy of which is attached as Exhibit A (the "GPL License"). You may not use these components except in compliance with the GPL License. In addition, you may have additional rights with respect to such components under the GPL License, including, without limitation, the right to obtain the source code for such components from us. You may obtain a copy of such source code by contacting us through the contact information provided on the Web Site. We will provide such source code in accordance with the GPL License.
I don't legally have the right to request the source code myself, because I don't own a UK NOOK yet. (Yeah, thinly veiled excuse for laziness!)
Click to expand...
Click to collapse
You're obviously not that lazy. Thanks for looking and gathering all of the extra info I need. I'll send B&N an e-mail and see what they say. I wouldn't be surprised if they didn't want to hand it out considering you can use it for an easy root setup and install the amazon and kobo stores which could financially damage their advance into new territories! What are we to do! Can't even subscribe to a newspaper or magazine through the nook store yet!
I'll let you know when / if I get a response

There is a setting in nook touch tools that you need to "arm," to allow software from unknown sources to be installed before the Amazon appstore can install software on a tinynooted device.
The setting is a tickbox, "Allow non-Market apps"
Untick it if it is ticked by default, then re-tick it to get apps to install.

roustabout said:
There is a setting in nook touch tools that you need to "arm," to allow software from unknown sources to be installed before the Amazon appstore can install software on a tinynooted device.
The setting is a tickbox, "Allow non-Market apps"
Untick it if it is ticked by default, then re-tick it to get apps to install.
Click to expand...
Click to collapse
Thanks for the reply but I actually tried that. No joy. However perhaps it is this that is not working and not amazon app store. Im just installing through ADB instead. I wonder if I can enable unknown sources through ADB. Something to look at I guess!

UK tinynoot attempt failing
loney01843 said:
Thanks for the reply but I actually tried that. No joy. However perhaps it is this that is not working and not amazon app store. Im just installing through ADB instead. I wonder if I can enable unknown sources through ADB. Something to look at I guess!
Click to expand...
Click to collapse
I tried using the tinynoot process from roustabout's thread here http://forum.xda-developers.com/showthread.php?t=1650593 and am stuck on the final reboot with a "Your NOOK is starting up..." message. Could you let me know if you used a different tinynoot method/set of files?

smerrett said:
I tried using the tinynoot process from roustabout's thread here http://forum.xda-developers.com/showthread.php?t=1650593 and am stuck on the final reboot with a "Your NOOK is starting up..." message. Could you let me know if you used a different tinynoot method/set of files?
Click to expand...
Click to collapse
Yep thats what I used. You on 1.2.0 and did you back up?
I didn't backup first and to get out of the starting message I used this:
http://forum.xda-developers.com/showthread.php?t=1289233&highlight=restore
Then I made a backup using this:
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
I hope this helps!

loney01843 said:
Yep thats what I used. You on 1.2.0 and did you back up?
I didn't backup first and to get out of the starting message I used this:
http://forum.xda-developers.com/showthread.php?t=1289233&highlight=restore
Then I made a backup using this:
http://blog.the-ebook-reader.com/20...-and-restore-nook-glow-and-nook-simple-touch/
I hope this helps!
Click to expand...
Click to collapse
Thanks for the tip on screen freeze but the link to the images on that post don't work for me. I am on 1.2 and made a backup before attempting any rooting - have managed to reinstate my original nook so quite pleased with myself.
Is there any point in rooting until someone can find a way of getting apps onto the 1.2 NSTG?

smerrett said:
Thanks for the tip on screen freeze but the link to the images on that post don't work for me. I am on 1.2 and made a backup before attempting any rooting - have managed to reinstate my original nook so quite pleased with myself.
Is there any point in rooting until someone can find a way of getting apps onto the 1.2 NSTG?
Click to expand...
Click to collapse
Great that you got a backup. If you want custom apps you can either wait for a different root kit or push ahead (since you have a safety net).
As I said, it worked for me.
If you don't mind searching for the .apk files you want you can use this:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
This has worked fine for me so far. Just don't try for custom kernels yet as they seem to give me troubles.
I will work more on this tomorrow including adjusting framework for gapps.

loney01843 said:
Great that you got a backup. If you want custom apps you can either wait for a different root kit or push ahead (since you have a safety net).
As I said, it worked for me.
If you don't mind searching for the .apk files you want you can use this:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
This has worked fine for me so far. Just don't try for custom kernels yet as they seem to give me troubles.
I will work more on this tomorrow including adjusting framework for gapps.
Click to expand...
Click to collapse
Thanks also for the code but as this is my first foray into rooting I think I'll hang around and watch for a bit! Perhaps if I start learning some more I may feel confident enough to try it.
Do you have copies of the files needed for the factory reset - the links are still not working for me.
Thanks again and sorry for bothering you. Hope tomorrow is productive for you.

smerrett said:
Thanks also for the code but as this is my first foray into rooting I think I'll hang around and watch for a bit! Perhaps if I start learning some more I may feel confident enough to try it.
Do you have copies of the files needed for the factory reset - the links are still not working for me.
Thanks again and sorry for bothering you. Hope tomorrow is productive for you.
Click to expand...
Click to collapse
http://dl.dropbox.com/u/13673492/n2T-Recovery_0.2.img
This is the file needed to force factory reset. However a quality backup like you have is far more important.
For anyone who wants to give this a go, here is a quick guide for root access and app installs using windows tools until I can make something more complete:
Make sure you use the CWM file suitable for your SD Card. I used "2gb_clockwork-rc2" because my card was 2gb+.
http://forum.xda-developers.com/showthread.php?t=1360994
(Thanks mali100)
Use WinImage with admin rights to restore CWM virtual hdd image to your SD.
Download tinynoot-1-of-2 and tinynoot-2-of-2
http://forum.xda-developers.com/showthread.php?t=1650593
(Thanks to eded333 and roustabout)
Put on CWM boot SD.
Install them in CWM back to back (I didn't bother with the restart in the middle as it should not make a difference considering the file content). After a restart you should have root access and an android launcher on your 1.2.0 Nook (among other files). If nook fails to boot one of the tinynoot files may have corrupted. Recover, Re-download and Retry!
Using ADB to install apps is easy. Extract this to your C drive:
http://dl.dropbox.com/u/13673492/ADB + Fastboot + Drivers.zip
Navigate to the folder in a cmd prompt.
Drop your APK into the same folder and on your nook open the "adbwireless" app and enable ADB
That app will tell you what your nooks IP address is.
Then you can:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
Hopefully this more comprehensive guide will get others with this software to start playing around.
Click thanks if this guides helpful.

loney01843 said:
If nook fails to boot one of the tinynoot files may have corrupted. Recover, Re-download and Retry!
Navigate to the folder in a cmd prompt.
Drop your APK into the same folder and on your nook open the "adbwireless" app and enable ADB
That app will tell you what your nooks IP address is.
Then you can:
Code:
adb connect ip.address.of.nook:portnumber
adb install app_of_your_choice.apk
Hopefully this more comprehensive guide will get others with this software to start playing around.
Click thanks if this guides helpful.
Click to expand...
Click to collapse
Great - thanks to your more detailed instructions, I have persevered and the second attempt at installing the tinynoot zips worked. Your post gave me the confidence to try installing apks for the first time and for anyone else who is unfamiliar with the processes used, I found these two pages useful for:
navigating within a command prompt (how naive): pcstats.com/articleview.cfm?articleid=1723&page=3
Pasting text into a command prompt (ditto): megaleecher.net/Copy_Paste_Text_Dos_Window
Sorry, as a newb I'm not trusted to post outside links yet. It took a couple of attempts of pasting and pressing enter to work out how to install using the adb code but it's not as hard as I expected.
I have tried installing the 1 Mobile Market which works but it is unable to install apps itself (not enough space).
Also, I have just installed NoRefreshToggle and can't seem to get it to work. Any thoughts - is 1.2 to blame? Really want this to work as Business Calendar Free is just a series of blinks at the moment!

Great! I'm glad you pushed onward and have root.
I am going through possibilities of other ways to install apps and mods.
No refresh is something that I would like as well but I think that the framework may need editing for 1.2.0. For fast mode a new kernel will need to be made or existing one modified.
Be aware that installing kernels not designed for this firmware can give you some serious problems.
Once I can setup app markets, I will work on these other modifications.
Stay tuned :good:

Take a look at the overclock kernel - it's got a lot of the norefresh features baked in, and gives you a nice ability to control both clock and kernel tuning (via the governor control.)
You're right, you can flash the two zips back to back with no ill effect, I was mistaken about what the second zip was doing.
I mistyped when I typed "nook touch tools," I meant nook color tools.
I'm very interested that the amazon store is not working in 1.2. I will see if the software's available for my device, so I can try to see what's happened.
As of now, the us bn site does not mention an os 1.2 for the glowlight.